When stream-filter cannot be attached, it is expected to return NULL,
and we should close the stream we opened and signal an error by
returning NULL ourselves from this function.
However, we attempted to dereference that NULL pointer between the
point we detected the error and returned from the function.
Brought-to-attention-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If 'src' already ends with a slash, then add_slash() will just return
it, meaning that 'free(src_with_slash)' is actually 'free(src)'. Since
we use 'src' later, this will result in use-after-free.
In fact, this cannot happen because 'src' comes from
internal_copy_pathspec() without the KEEP_TRAILING_SLASH flag, so any
trailing '/' will have been stripped; but static analysis tools are not
clever enough to realise this and so warn that 'src' could be used after
having been free'd. Fix this by checking that 'src_w_slash' is indeed
newly allocated memory.
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We treat these as unsigned everywhere and compare against unsigned
values, so declare them using the typedef we already have for this.
While we're here, fix the indentation as well.
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
iconv(3) returns "(size_t) -1" on error. Make sure that we cast the
"-1" properly when checking for this.
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we carry on after outputting config_error_nonbool then we're
guaranteed to dereference a null pointer.
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We currently don't reuse http connections when fetching via
the smart-http protocol. This is bad because the TCP
handshake introduces latency, and especially because SSL
connection setup may be non-trivial.
We can fix it by consistently using curl's "multi"
interface. The reason is rather complicated:
Our http code has two ways of being used: queuing many
"slots" to be fetched in parallel, or fetching a single
request in a blocking manner. The parallel code is built on
curl's "multi" interface. Most of the single-request code
uses http_request, which is built on top of the parallel
code (we just feed it one slot, and wait until it finishes).
However, one could also accomplish the single-request scheme
by avoiding curl's multi interface entirely and just using
curl_easy_perform. This is simpler, and is used by post_rpc
in the smart-http protocol.
It does work to use the same curl handle in both contexts,
as long as it is not at the same time. However, internally
curl may not share all of the cached resources between both
contexts. In particular, a connection formed using the
"multi" code will go into a reuse pool connected to the
"multi" object. Further requests using the "easy" interface
will not be able to reuse that connection.
The smart http protocol does ref discovery via http_request,
which uses the "multi" interface, and then follows up with
the "easy" interface for its rpc calls. As a result, we make
two HTTP connections rather than reusing a single one.
We could teach the ref discovery to use the "easy"
interface. But it is only once we have done this discovery
that we know whether the protocol will be smart or dumb. If
it is dumb, then our further requests, which want to fetch
objects in parallel, will not be able to reuse the same
connection.
Instead, this patch switches post_rpc to build on the
parallel interface, which means that we use it consistently
everywhere. It's a little more complicated to use, but since
we have the infrastructure already, it doesn't add any code;
we can just factor out the relevant bits from http_request.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a line in a patch starts with "--- " it will be deemed
malformed unless it also contains the proper diff header
format. This situation can happen with a valid patch if
it has a line starting with "-- " and that line is removed.
This patch just removes the check in git-contacts.
Signed-off-by: Lars Gullik Bjønnes <larsbj@gullik.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Refreshing index requires work tree. So we have two options: always
set up work tree (and refuse to reset if failing to do so), or make
refreshing index optional.
As refreshing index is not the main task, it makes more sense to make
it optional. This allows us to still work in a bare repository to update
what is in the index.
Reported-by: Patrick Palka <patrick@parcs.ath.cx>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The GIT_EXTERNAL_DIFF calling code attempts to reuse existing worktree
files for the worktree side of diffs, for performance reasons.
However, that code also tries to do the same with submodules. This
results in calls to $GIT_EXTERNAL_DIFF where the old-file is a file of
the form "Submodule commit $sha1", but the new-file is a directory in
the worktree.
Fix it by never reusing a worktree "file" in the submodule case.
Reported-by: Grégory Pakosz <gregory.pakosz@gmail.com>
Signed-off-by: Thomas Rast <tr@thomasrast.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We do not run the httpd nor git-daemon tests by default, as
they are rather heavyweight and require network access
(albeit over localhost). However, it would be nice if more
pepole ran them, for two reasons:
1. We would get more test coverage on more systems.
2. The point of the test suite is to find regressions. It
is very easy to change some of the underlying code and
break the httpd code without realizing you are even
affecting it. Running the httpd tests helps find these
problems sooner (ideally before the patches even hit
the list).
We still want to leave an "out", though, for people who really do
not want to run them. For that reason, the GIT_TEST_HTTPD and
GIT_TEST_GIT_DAEMON variables are now tri-state booleans
(true/false/auto), so you can say GIT_TEST_HTTPD=false to turn the
tests back off. To support those who want a stable single way to
disable these tests across versions of Git before and after this
change, an empty string explicitly set to these variables is also
taken as "false", so the behaviour changes only for those who:
a. did not express any preference by leaving these variables
unset. They did not test these features before, but now they
do; or
b. did express that they want to test these features by setting
GIT_TEST_FEATURE=false (or any equivalent other ways to tell
"false" to Git, e.g. "0"), which has been a valid but funny way
to say that they do want to test the feature only because we
used to interpret any non-empty string to mean "yes please
test". They no longer test that feature.
In addition, we are forgiving of common setup failures (e.g., you do
not have apache installed, or have an old version) when the
tri-state is "auto" (or unset), but report an error when it is
"true". This makes "auto" a sane default, as we should not cause
failures on setups where the tests cannot run. But it allows people
who use "true" to catch regressions in their system (e.g., they
uninstalled apache, but were expecting their automated test runs to
test git-httpd, and would want to be notified).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git merge-base --octopus" used to leave cleaning up suboptimal
result to the caller, but now it does the clean-up itself.
* bm/merge-base-octopus-dedup:
merge-base --octopus: reduce the result from get_octopus_merge_bases()
merge-base: separate "--independent" codepath into its own helper
"git log --left-right A...B" lost the "leftness" of commits
reachable from A when A is a tag as a side effect of a recent
bugfix. This is a regression in 1.8.4.x series.
* jc/revision-range-unpeel:
revision: propagate flag bits from tags to pointees
revision: mark contents of an uninteresting tree uninteresting
"git clone" would fail to clone from a repository that has a ref
directly under "refs/", e.g. "refs/stash", because different
validation paths do different things on such a refname. Loosen the
client side's validation to allow such a ref.
* jk/allow-fetch-onelevel-refname:
fetch-pack: do not filter out one-level refs
A handful of bugs around interpreting $branch@{upstream} notation
and its lookalike, when $branch part has interesting characters,
e.g. "@", and ":", have been fixed.
* jk/interpret-branch-name-fix:
interpret_branch_name: find all possible @-marks
interpret_branch_name: avoid @{upstream} past colon
interpret_branch_name: always respect "namelen" parameter
interpret_branch_name: rename "cp" variable to "at"
interpret_branch_name: factor out upstream handling
A recent update to "git send-email" broke platforms where
/etc/ssl/certs/ directory exists but cannot be used as SSL_ca_path
(e.g. Fedora rawhide).
* rk/send-email-ssl-cert:
send-email: /etc/ssl/certs/ directory may not be usable as ca_path
"git repack --max-pack-size=8g" stopped being parsed correctly when
the command was reimplemented in C.
* sb/repack-in-c:
repack: propagate pack-objects options as strings
repack: make parsed string options const-correct
repack: fix typo in max-pack-size option
The pathspec matching code, while comparing two trees (e.g. "git
diff A B -- path1 path2") was too aggressive and failed to match
some paths when multiple pathspecs were involved.
* as/tree-walk-fix-aggressive-short-cut:
tree_entry_interesting: match against all pathspecs
start_httpd is supposed to be at the beginning of the test file, not
the middle of it. The "test_seq" line in "no shallow lines.." test is
updated to compensate missing refs that are there in t5537, but not in
the new t5539.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit a201c20 tried to optimize out a loop like:
for (i = 0; i < len; i++)
data[i] = ntohll(data[i]);
in the big-endian case, because we know that ntohll is a
noop, and we do not need to pay the cost of the loop at all.
However, it mistakenly assumed that __BYTE_ORDER was always
defined, whereas it may not be on systems which do not
define it by default, and where we did not need to define it
to set up the ntohll macro. This includes OS X and Windows.
We could muck with the ordering in compat/bswap.h to make
sure it is defined unconditionally, but it is simpler to
still to just execute the loop unconditionally. That avoids
the application code knowing anything about these magic
macros, and lets it depend only on having ntohll defined.
And since the resulting loop looks like (on a big-endian
system):
for (i = 0; i < len; i++)
data[i] = data[i];
any decent compiler can probably optimize it out.
Original report and analysis by Brian Gernhardt.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The recent translation was giving the idea that all commits
based on a graft were meant to be hidden. Make it clear that
it is the graft commit itself.
Reported-by: David Kastrup <dak@gnu.org>
Signed-off-by: Ralf Thielow <ralf.thielow@gmail.com>
git merge already allows us to sign commits, and git rebase has recently
learned how to do so as well. Teach git pull to parse the -S/--gpg-sign
option and pass this along to merge or rebase, as appropriate.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Nicolas Vigier <boklm@mars-attacks.org>
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is no functional change. The reason for this change is to be able
to add a new option taking an optional argument.
Signed-off-by: Nicolas Vigier <boklm@mars-attacks.org>
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We state that the following paragraph mentions the pickaxe
interface, but the term pickaxe is not then used. This
change clarifies that the example command uses the pickaxe
interface and what it is searching for.
Signed-off-by: Albert L. Lash, IV <alash3@bloomberg.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Current text claims optimization, implying the use of
hardlinks, when this option ratchets down the level of
efficiency. This change explains the difference made by
using this option, namely copying instead of hardlinking,
and why it may be useful.
Signed-off-by: Albert L. Lash, IV <alash3@bloomberg.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All other man files have capitalized descriptions which
immediately follow the command's name. Let's capitalize
this one too for consistency.
Signed-off-by: Albert L. Lash, IV <alash3@bloomberg.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The term mismerges without hyphen is used a few other
places in the documentation. Let's update this to
be consistent.
Signed-off-by: Albert L. Lash, IV <alash3@bloomberg.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A recent commit taught lib-httpd to always start apache on
the same port as the numbered tests. Let's do the same for
the git-daemon tests.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
`gc --auto` takes time and can block the user temporarily (but not any
less annoyingly). Make it run in background on systems that support
it. The only thing lost with running in background is printouts. But
gc output is not really interesting. You can keep it in foreground by
changing gc.autodetach.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In smart http, upload-pack adds new shallow lines at the beginning of
each rpc response. Only shallow lines from the first rpc call are
useful. After that they are thrown away. It's designed this way
because upload-pack is stateless and has no idea when its shallow
lines are helpful or not.
So after refs are negotiated with multi_ack_detailed and the server
thinks it learned enough, it sends "ACK obj-id ready", terminates the
rpc call and waits for the final rpc round. The client sends "done".
The server sends another response, which also has shallow lines at
the beginning, and the last "ACK obj-id" line.
When no-done is active, the last round is cut out, the server sends
"ACK obj-id ready" and "ACK obj-id" in the same rpc
response. fetch-pack is updated to recognize this and not send
"done". However it still tries to consume shallow lines, which are
never sent.
Update the code, make sure to skip consuming shallow lines when
no-done is enabled.
Reported-by: Jeff King <peff@peff.net>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
See 3e63b21 (upload-pack: Implement no-done capability - 2011-03-14)
and 761ecf0 (fetch-pack: Implement no-done capability - 2011-03-14)
for more information.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
pack-protocol.txt explains in detail how multi_ack_detailed works and
what's the difference between no multi_ack, multi_ack and
multi_ack_detailed. No need to repeat here.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's introduced in 1bd8c8f (git-upload-pack: Support the multi_ack
protocol - 2005-10-28) but probably better documented in the commit
message of 78affc4 (Add multi_ack_detailed capability to
fetch-pack/upload-pack - 2009-10-30).
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make clear which one is for dumb protocol, which one is for smart from
their file name.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We set the default apache port for each of the httpd tests
to the 4-digit test number of the test script. We want these
to remain unique so that the tests do not conflict with each
other when run in parallel.
Instead of doing it manually in each test script, let's just
set it from the test name at run time. This is simpler, and
is one less thing to be updated when test scripts are
renamed (e.g., when being re-rolled or when conflicting
after being merged with another topic).
Incidentally, this fixes a case where t5537 and t5538 used
the same port number (5537), and could conflict with each
other when run in parallel.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
