We sometimes sprintf into fixed-size buffers when we know
that the buffer is large enough to fit the input (either
because it's a constant, or because it's numeric input that
is bounded in size). Likewise with strcpy of constant
strings.
However, these sites make it hard to audit sprintf and
strcpy calls for buffer overflows, as a reader has to
cross-reference the size of the array with the input. Let's
use xsnprintf instead, which communicates to a reader that
we don't expect this to overflow (and catches the mistake in
case we do).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Our compat inet_ntop4 function writes to a temporary buffer
with snprintf, and then uses strcpy to put the result into
the final "dst" buffer. We check the return value of
snprintf against the size of "dst", but fail to account for
the NUL terminator. As a result, we may overflow "dst" with
a single NUL. In practice, this doesn't happen because the
output of inet_ntop is limited, and we provide buffers that
are way oversized.
We can fix the off-by-one check easily, but while we are
here let's also use strlcpy for increased safety, just in
case there are other bugs lurking.
As a side note, this compat code seems to be BSD-derived.
Searching for "vixie inet_ntop" turns up NetBSD's latest
version of the same code, which has an identical fix (and
switches to strlcpy, too!).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ensure that when passing a pipe, the gnulib poll replacement will not
return 0 before the timeout has passed.
Not obeying the timeout (and merely returning 0) causes pathological
behavior when preparing a packfile for a repository and taking a
long time to do so. If poll were to return 0 immediately, this would
cause keep-alives to get sent as quickly as possible until the packfile
was created. Such deviance from the standard would cause megabytes (or
more) of keep-alive packets to be sent.
GetTickCount is used as it is efficient, stable and monotonically
increasing. (Neither GetSystemTime nor QueryPerformanceCounter have
all three of these properties.)
Signed-off-by: Edward Thomson <ethomson@microsoft.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code to open and test the second end of the pipe clearly imitates
the code for the first end. A little too closely, though... Let's fix
the obvious copy-edit bug.
Signed-off-by: Jose F. Morales <jfmcjf@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Acked-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach the index to optionally remember already seen untracked files
to speed up "git status" in a working tree with tons of cruft.
* nd/untracked-cache: (24 commits)
git-status.txt: advertisement for untracked cache
untracked cache: guard and disable on system changes
mingw32: add uname()
t7063: tests for untracked cache
update-index: test the system before enabling untracked cache
update-index: manually enable or disable untracked cache
status: enable untracked cache
untracked-cache: temporarily disable with $GIT_DISABLE_UNTRACKED_CACHE
untracked cache: mark index dirty if untracked cache is updated
untracked cache: print stats with $GIT_TRACE_UNTRACKED_STATS
untracked cache: avoid racy timestamps
read-cache.c: split racy stat test to a separate function
untracked cache: invalidate at index addition or removal
untracked cache: load from UNTR index extension
untracked cache: save to an index extension
ewah: add convenient wrapper ewah_serialize_strbuf()
untracked cache: don't open non-existent .gitignore
untracked cache: mark what dirs should be recursed/saved
untracked cache: record/validate dir mtime and reuse cached output
untracked cache: make a wrapper around {open,read,close}dir()
...
Many long-running operations show progress eye-candy, even when
they are later backgrounded. Hide the eye-candy when the process
is sent to the background instead.
* lm/squelch-bg-progress:
compat/mingw: stubs for getpgid() and tcgetpgrp()
progress: no progress in background
Windows does not have process groups. It is, therefore, the simplest
to pretend that each process is in its own process group.
While here, move the getppid() stub from its old location (between
two sync related functions) next to the two new functions.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Long overdue departure from the assumption that S_IFMT is shared by
everybody made in 2005.
* dm/compat-s-ifmt-for-zos:
compat: convert modes to use portable file type values
open() emulated on Windows platforms did not give EISDIR upon an
attempt to open a directory for writing.
* js/windows-open-eisdir-error:
Windows: correct detection of EISDIR in mingw_open()
This adds simple wrapper functions around calls to stat(), fstat(),
and lstat() that translate the operating system's native file type
bits to those used by most operating systems. It also rewrites the
S_IF* macros to the common values, so all file type processing is
performed using the translated modes. This makes projects portable
across operating systems that use different file type definitions.
Only the file type bits may be affected by these compatibility
functions; the file permission bits are assumed to be 07777 and are
passed through unchanged.
Signed-off-by: David Michael <fedora.dm0@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
According to the Linux open(2) man page, open() must return EISDIR
if a directory was attempted to be opened for writing. Our emulation
in mingw_open() does not get this right: it checks only for O_CREAT.
Fix it to check for a write request.
This fixes a failure in reflog handling, which opens files with
O_APPEND|O_WRONLY, but without O_CREAT, and expects EISDIR when the
named file happens to be a directory.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
z/OS port
* dm/port2zos:
compat/bswap.h: detect endianness from XL C compiler macros
Makefile: reorder linker flags in the git executable rule
git-compat-util.h: support variadic macros with the XL C compiler
There is no /usr/include/endian.h equivalent on z/OS, but the
compiler will define macros to indicate endianness on host and
target hardware. This adds a test for these macros as a last
resort for determining byte order.
Signed-off-by: David Michael <fedora.dm0@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Windows does not have POSIX-like signals, and so we ignore all
operations on the non-existent signal mask machinery.
Do not turn sigemptyset into a function, but leave it a macro that
erases the code in the argument because it is used to set sa_mask
of a struct sigaction, but our dummy in mingw.h does not have that
member.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Most of these are battle-tested in msysgit and are needed to
complete what has been merged to 'master' already.
* sk/mingw-uni-fix-more:
Win32: enable color output in Windows cmd.exe
Win32: patch Windows environment on startup
Win32: keep the environment sorted
Win32: use low-level memory allocation during initialization
Win32: reduce environment array reallocations
Win32: don't copy the environment twice when spawning child processes
Win32: factor out environment block creation
Win32: unify environment function names
Win32: unify environment case-sensitivity
Win32: fix environment memory leaks
Win32: Unicode environment (incoming)
Win32: Unicode environment (outgoing)
Revert "Windows: teach getenv to do a case-sensitive search"
tests: do not pass iso8859-1 encoded parameter
Use xcalloc() instead of xmalloc() followed by memset() to allocate
and zero out memory because it's shorter and avoids duplicating the
function parameters.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git requires the TERM environment variable to be set for all color*
settings. Simulate the TERM variable if it is not set (default on Windows).
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Stepan Kasal <kasal@ucw.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix Windows specific environment settings on startup rather than checking
for special values on every getenv call.
As a side effect, this makes the patched environment (i.e. with properly
initialized TMPDIR and TERM) available to child processes.
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Stepan Kasal <kasal@ucw.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Windows environment is sorted, keep it that way for O(log n)
environment access.
Change compareenv to compare only the keys, so that it can be used to
find an entry irrespective of the value.
Change lookupenv to binary seach for an entry. Return one's complement of
the insert position if not found (libc's bsearch returns NULL).
Replace MSVCRT's getenv with a minimal do_getenv based on the binary search
function.
Change do_putenv to insert new entries at the correct position. Simplify
the function by swapping if conditions and using memmove instead of for
loops.
Move qsort from make_environment_block to mingw_startup. We still need to
sort on startup to make sure that the environment is sorted according to
our compareenv function (while Win32 / CreateProcess requires the
environment block to be sorted case-insensitively, CreateProcess currently
doesn't enforce this, and some applications such as bash just don't care).
Note that environment functions are _not_ thread-safe and are not required
to be so by POSIX, the application is responsible for synchronizing access
to the environment. MSVCRT's getenv and our new getenv implementation are
better than that in that they are thread-safe with respect to other getenv
calls as long as the environment is not modified. Git's indiscriminate use
of getenv in background threads currently requires this property.
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Stepan Kasal <kasal@ucw.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As of d41489a6 "Add more large blob test cases", git's high-level memory
allocation functions (xmalloc, xmemdupz etc.) access the environment to
simulate limited memory in tests (see 'getenv("GIT_ALLOC_LIMIT")' in
memory_limit_check()). These functions should not be used before the
environment is fully initialized (particularly not to initialize the
environment itself).
The current solution ('environ = NULL; ALLOC_GROW(environ...)') only works
because MSVCRT's getenv() reinitializes environ when it is NULL (i.e. it
leaves us with two sets of unusabe (non-UTF-8) and unfreeable (CRT-
allocated) environments).
Add our own set of malloc-or-die functions to be used in startup code.
Also check the result of __wgetmainargs, which may fail if there's not
enough memory for wide-char arguments and environment.
This patch is in preparation of the sorted environment feature, which
completely replaces MSVCRT's getenv() implementation.
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Stepan Kasal <kasal@ucw.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move environment array reallocation from do_putenv to the respective
callers. Keep track of the environment size in a global variable. Use
ALLOC_GROW in mingw_putenv to reduce reallocations. Allocate a
sufficiently sized environment array in make_environment_block to prevent
reallocations.
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Stepan Kasal <kasal@ucw.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When spawning child processes via start_command(), the environment and all
environment entries are copied twice. First by make_augmented_environ /
copy_environ to merge with child_process.env. Then a second time by
make_environment_block to create a sorted environment block string as
required by CreateProcess.
Move the merge logic to make_environment_block so that we only need to copy
the environment once. This changes semantics of the env parameter: it now
expects a delta (such as child_process.env) rather than a full environment.
This is not a problem as the parameter is only used by start_command()
(all other callers previously passed char **environ, and now pass NULL).
The merge logic no longer xstrdup()s the environment strings, so do_putenv
must not free them. Add a parameter to distinguish this from normal putenv.
Remove the now unused make_augmented_environ / free_environ API.
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Stepan Kasal <kasal@ucw.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Environment helper functions use random naming ('env' prefix or suffix or
both, with or without '_'). Change to POSIX naming scheme ('env' suffix,
no '_').
Env_setenv has more in common with putenv than setenv. Change to do_putenv.
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Stepan Kasal <kasal@ucw.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The environment on Windows is case-insensitive. Some environment functions
(such as unsetenv and make_augmented_environ) have always used case-
sensitive comparisons instead, while others (getenv, putenv, sorting in
spawn*) were case-insensitive.
Prevent potential inconsistencies by using case-insensitive comparison in
lookup_env (used by putenv, unsetenv and make_augmented_environ).
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Stepan Kasal <kasal@ucw.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All functions that modify the environment have memory leaks.
Disable gitunsetenv in the Makefile and use env_setenv (via mingw_putenv)
instead (this frees removed environment entries).
Move xstrdup from env_setenv to make_augmented_environ, so that
mingw_putenv no longer copies the environment entries (according to POSIX
[1], "the string [...] shall become part of the environment"). This also
fixes the memory leak in gitsetenv, which expects a POSIX compliant putenv.
[1] http://pubs.opengroup.org/onlinepubs/009695399/functions/putenv.html
Note: This patch depends on taking control of char **environ and having
our own mingw_putenv (both introduced in "Win32: Unicode environment
(incoming)").
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Stepan Kasal <kasal@ucw.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert environment from UTF-16 to UTF-8 on startup.
No changes to getenv() are necessary, as the MSVCRT version is implemented
on top of char **environ.
However, putenv / _wputenv from MSVCRT no longer work, for two reasons:
1. they try to keep environ, _wenviron and the Win32 process environment
in sync, using the default system encoding instead of UTF-8 to convert
between charsets
2. msysgit and MSVCRT use different allocators, memory allocated in git
cannot be freed by the CRT and vice versa
Implement mingw_putenv using the env_setenv helper function from the
environment merge code.
Note that in case of memory allocation failure, putenv now dies with error
message (due to xrealloc) instead of failing with ENOMEM. As git assumes
setenv / putenv to always succeed, this prevents it from continuing with
incorrect settings.
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Stepan Kasal <kasal@ucw.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert environment from UTF-8 to UTF-16 when creating other processes.
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Stepan Kasal <kasal@ucw.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This reverts commit df599e9612.
As of 5e9637c6 "i18n: add infrastructure for translating Git with gettext",
eval_gettext uses MinGW envsubst.exe instead of git-sh-i18n--envsubst.exe
for variable substitution. This breaks git-submodule.sh messages and tests,
as envsubst.exe doesn't support case-sensitive environment lookup (the same
is true for almost everything on Windows, including MSys and Cygwin tools).
30a615ac "Windows/i18n: rename $path to prevent clashes with $PATH" renames
the conflicting variable in git-submodule.sh, so that it works on Windows
(i.e. with case-insensitive environment, regardless of the toolset).
Revert to the documented behaviour of case-insensitive environment on
Windows.
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Stepan Kasal <kasal@ucw.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
MinGW and MSVC before 2010 don't define ELOOP, use EMLINK (aka "Too many
links") instead.
Signed-off-by: Karsten Blees <blees@dcon.de>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Changes opendir/readdir to use Windows Unicode APIs and convert between
UTF-8/UTF-16.
Removes parameter checks that are already covered by xutftowcs_path. This
changes detection of ENAMETOOLONG from MAX_PATH - 2 to MAX_PATH (matching
is_dir_empty in mingw.c). If name + "/*" or the resulting absolute path is
too long, FindFirstFile fails and errno is set through err_win_to_posix.
Increases the size of dirent.d_name to accommodate the full
WIN32_FIND_DATA.cFileName converted to UTF-8 (UTF-16 to UTF-8 conversion
may grow by factor three in the worst case).
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Stepan Kasal <kasal@ucw.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Replaces Windows "ANSI" APIs dealing with file- or path names with their
Unicode equivalent, adding UTF-8/UTF-16LE conversion as necessary.
The dirent API (opendir/readdir/closedir) is updated in a separate commit.
Adds trivial wrappers for access, chmod and chdir.
Adds wrapper for mktemp (needed for both mkstemp and mkdtemp).
The simplest way to convert a repository with legacy-encoded (e.g. Cp1252)
file names to UTF-8 ist to checkout with an old msysgit version and
"git add --all & git commit" with the new version.
Includes a fix for bug reported by John Chen:
On Windows XP (not Win7), directories cannot be deleted while a find handle
is open, causing "Deletion of directory '...' failed. Should I try again?"
prompts.
Prior to this commit, these failures were silently ignored due to
strbuf_free in is_dir_empty resetting GetLastError to ERROR_SUCCESS.
Close the find handle in is_dir_empty so that git doesn't block deletion
of the directory even after all other applications have released it.
Reported-by: John Chen <john0312@gmail.com>
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Stepan Kasal <kasal@ucw.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git status", even though it is a read-only operation, tries to
update the index with refreshed lstat(2) info to optimize future
accesses to the working tree opportunistically, but this could
race with a "read-write" operation that modify the index while it
is running. Detect such a race and avoid overwriting the index.
* ym/fix-opportunistic-index-update-race:
read-cache.c: verify index file before we opportunistically update it
wrapper.c: add xpread() similar to xread()
Convert command line arguments from UTF-16 to UTF-8 on startup.
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Stepan Kasal <kasal@ucw.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert command line arguments from UTF-8 to UTF-16 when creating other
processes.
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Stepan Kasal <kasal@ucw.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
MingwRT listens to _CRT_glob to decide if __getmainargs should
perform globbing, with the default being that it should.
Unfortunately, __getmainargs globbing is sub-par; for instance
patterns like "*.c" will only match c-sources in the current
directory.
Disable __getmainargs' command line wildcard expansion, so these
patterns will be left untouched, and handled by Git's superior
built-in globbing instead.
MSVC defaults to no globbing, so we don't need to do anything
in that case.
This fixes t5505 and t7810.
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Stepan Kasal <kasal@ucw.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
...by removing a static buffer in do_stat_internal.
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Stepan Kasal <kasal@ucw.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The only public spawn function that needs to tweak the environment is
mingw_spawnvpe (called from start_command). Nevertheless, all internal
spawn* functions take an env parameter and needlessly pass the global
char **environ around. Remove the env parameter where it's not needed.
This removes the internal mingw_execve abstraction, which is no longer
needed.
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Stepan Kasal <kasal@ucw.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is in the great tradition of POSIX. Original fix by Olivier Refalo.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Stepan Kasal <kasal@ucw.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As of "Win32: Thread-safe windows console output", child processes may
print to the console even if stdout has been redirected to a file. E.g.:
git config tar.cat.command "cat"
git archive -o test.cat HEAD
Detecting whether stdout / stderr point to our console pipe is currently
based on the assumption that OS HANDLE values are never reused. This is
apparently not true if stdout / stderr is replaced via dup2() (as in
builtin/archive.c:17).
Instead of comparing handle values, check if the file descriptor isatty()
backed by a pipe OS handle. This is only possible by swapping the handles
in MSVCRT's internal data structures, as we do in winansi_init().
Reported-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Compatibility enhancement for Solaris.
* cb/byte-order:
compat/bswap.h: fix endianness detection
compat/bswap.h: restore preference __BIG_ENDIAN over BIG_ENDIAN
compat/bswap.h: detect endianness on more platforms that don't use BYTE_ORDER
As of "Win32: Thread-safe windows console output", git-log no longer
terminates when the pager process dies. This is due to disabling buffering
for the replaced stdout / stderr streams. Git-log will periodically fflush
stdout (see write_or_die.c/mayble_flush_or_die()), but with no buffering,
this is a NOP that always succeeds (so we never detect the EPIPE error).
Exchange the original console handles with our console thread pipe handles
by accessing the internal MSVCRT data structures directly (which are
exposed via __pioinfo for some reason).
Implement this with minimal assumptions about the actual data structure to
make it work with different (hopefully even future) MSVCRT versions.
While messing with internal data structures is ugly, this patch solves the
problem at the source instead of adding more workarounds. We no longer need
the special winansi_isatty override, and the limitations documented in
"Win32: Thread-safe windows console output" are gone (i.e. fdopen(1/2)
returns unbuffered streams now, and isatty() for duped console file
descriptors works as expected).
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Stepan Kasal <kasal@ucw.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Winansi.c has many static variables that are accessed and modified from
the [v][f]printf / fputs functions overridden in the file. This may cause
multi threaded git commands that print to the console to produce corrupted
output or even crash.
Additionally, winansi.c doesn't override all functions that can be used to
print to the console (e.g. fwrite, write, fputc are missing), so that ANSI
escapes don't work properly for some git commands (e.g. git-grep).
Instead of doing ANSI emulation in just a few wrapped functions on top of
the IO API, let's plug into the IO system and take advantage of the thread
safety inherent to the IO system.
Redirect stdout and stderr to a pipe if they point to the console. A
background thread reads from the pipe, handles ANSI escape sequences and
UTF-8 to UTF-16 conversion, then writes to the console.
The pipe-based stdout and stderr replacements must be set to unbuffered, as
MSVCRT doesn't support line buffering and fully buffered streams are
inappropriate for console output.
Due to the byte-oriented pipe, ANSI escape sequences and multi-byte UTF-8
sequences can no longer be expected to arrive in one piece. Replace the
string-based ansi_emulate() with a simple stateful parser (this also fixes
colored diff hunk headers, which were broken as of commit 2efcc977).
Override isatty to return true for the pipes redirecting to the console.
Exec/spawn obtain the original console handle to pass to the next process
via winansi_get_osfhandle().
All other overrides are gone, the default stdio implementations work as
expected with the piped stdout/stderr descriptors.
Global variables are either initialized on startup (single threaded) or
exclusively modified by the background thread. Threads communicate through
the pipe, no further synchronization is necessary.
The background thread is terminated by disonnecting the pipe after flushing
the stdio and pipe buffers. This doesn't work for anonymous pipes (created
via CreatePipe), as DisconnectNamedPipe only works on the read end, which
discards remaining data. Thus we have to setup the pipe manually, with the
write end beeing the server (opened with CreateNamedPipe) and the read end
the client (opened with CreateFile).
Limitations: doesn't track reopened or duped file descriptors, i.e.:
- fdopen(1/2) returns fully buffered streams
- dup(1/2), dup2(1/2) returns normal pipe descriptors (i.e. isatty() =
false, winansi_get_osfhandle won't return the original console handle)
Currently, only the git-format-patch command uses xfdopen(xdup(1)) (see
"realstdout" in builtin/log.c), but works well with these limitations.
Many thanks to Atsushi Nakagawa <atnak@chejz.com> for suggesting and
reviewing the thread-exit-mechanism.
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Stepan Kasal <kasal@ucw.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add Unicode conversion functions to convert between Windows native UTF-16LE
encoding to UTF-8 and back.
To support repositories with legacy-encoded file names, the UTF-8 to UTF-16
conversion function tries to create valid, unique file names even for
invalid UTF-8 byte sequences, so that these repositories can be checked out
without error.
The current implementation leaves invalid UTF-8 bytes in range 0xa0 - 0xff
as is (producing printable Unicode chars \u00a0 - \u00ff, equivalent to
ISO-8859-1), and converts 0x80 - 0x9f to hex-code (\u0080 - \u009f are
control chars).
The Windows MultiByteToWideChar API was not used as it either drops invalid
UTF-8 sequences (on Win2k/XP; producing non-unique or even empty file
names) or converts them to the replacement char \ufffd (Vista/7; causing
ERROR_INVALID_NAME in subsequent calls to file system APIs).
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Stepan Kasal <kasal@ucw.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Unicode console output won't display correctly with default settings
because the default console font ("Terminal") only supports the system's
OEM charset. Unfortunately, this is a user specific setting, so it cannot
be easily fixed by e.g. some registry tricks in the setup program.
This change prints a warning on exit if console output contained non-ascii
characters and the console font is supposedly not a TrueType font (which
usually have decent Unicode support).
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Stepan Kasal <kasal@ucw.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
GetStdHandle(STD_OUTPUT_HANDLE) doesn't work for stderr if stdout is
redirected. Use _get_osfhandle of the FILE* instead.
_isatty() is true for all character devices (including parallel and serial
ports). Check return value of GetConsoleScreenBufferInfo instead to
reliably detect console handles (also don't initialize internal state from
an uninitialized CONSOLE_SCREEN_BUFFER_INFO structure if the function
fails).
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Stepan Kasal <kasal@ucw.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
WriteConsoleW seems to be the only way to reliably print unicode to the
console (without weird code page conversions).
Also redirects vfprintf to the winansi.c version.
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Stepan Kasal <kasal@ucw.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix const warnings in http-fetch.c and remote-curl.c main() where is
argv declared as const.
The fix should work for all future declarations of main, no matter
whether the second parameter's type is "char**", "const char**", or
"char *[]".
Signed-off-by: Stepan Kasal <kasal@ucw.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code in the MinGW main macro is getting more and more complex, move to
a separate initialization function for readabiliy and extensibility.
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Stepan Kasal <kasal@ucw.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
[efl: moved MinGW-specific part to compat/]
[jes: fixed compilation on non-Windows]
Eric Sunshine fixed mingw_offset_1st_component() to return
consistently "foo" for UNC "//machine/share/foo", cf
http://groups.google.com/group/msysgit/browse_thread/thread/c0af578549b5dda0
Author: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Cezary Zawadka <czawadka@gmail.com>
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Stepan Kasal <kasal@ucw.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Improve the dirent implementation by removing the relics that were once
necessary to plug into the now unused MinGW runtime, in preparation for
Unicode file name support.
Move FindFirstFile to opendir, and FindClose to closedir, with the
following implications:
- DIR.dd_name is no longer needed
- chdir(one); opendir(relative); chdir(two); readdir() works as expected
(i.e. lists one/relative instead of two/relative)
- DIR.dd_handle is a valid handle for the entire lifetime of the DIR struct
- thus, all checks for dd_handle == INVALID_HANDLE_VALUE and dd_handle == 0
have been removed
- the special case that the directory has been fully read (which was
previously explicitly tracked with dd_handle == INVALID_HANDLE_VALUE &&
dd_stat != 0) is now handled implicitly by the FindNextFile error
handling code (if a client continues to call readdir after receiving
NULL, FindNextFile will continue to fail with ERROR_NO_MORE_FILES, to
the same effect)
- extracting dirent data from WIN32_FIND_DATA is needed in two places, so
moved to its own method
- GetFileAttributes is no longer needed. The same information can be
obtained from the FindFirstFile error code, which is ERROR_DIRECTORY if
the name is NOT a directory (-> ENOTDIR), otherwise we can use
err_win_to_posix (e.g. ERROR_PATH_NOT_FOUND -> ENOENT). The
ERROR_DIRECTORY case could be fixed in err_win_to_posix, but this
probably breaks other functionality.
Removes the ERROR_NO_MORE_FILES check after FindFirstFile (this was
fortunately a NOOP (searching for '*' always finds '.' and '..'),
otherwise the subsequent code would have copied data from an uninitialized
buffer).
Changes malloc to git support function xmalloc, so opendir will die() if
out of memory, rather than failing with ENOMEM and letting git work on
incomplete directory listings (error handling in dir.c is quite sparse).
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Stepan Kasal <kasal@ucw.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git-compat-util.h is two dirs up, and already includes <dirent.h> (which
is the same as "dirent.h" due to -Icompat/win32 in the Makefile).
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Stepan Kasal <kasal@ucw.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
FILENAME_MAX and MAX_PATH are both 260 on Windows, however, MAX_PATH is
used throughout the other Win32 code in Git, and also defines the length
of file name buffers in the Win32 API (e.g. WIN32_FIND_DATA.cFileName,
from which we're copying the dirent data).
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Stepan Kasal <kasal@ucw.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the union around dirent.d_type and the unused dirent.d_reclen member
(which was necessary for compatibility with the MinGW dirent runtime, which
is no longer used).
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Stepan Kasal <kasal@ucw.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are no proper inodes on Windows, so remove dirent.d_ino and #define
NO_D_INO_IN_DIRENT in the Makefile (this skips e.g. an ineffective qsort in
fsck.c).
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Stepan Kasal <kasal@ucw.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Read-only operations such as "git status" that internally refreshes
the index write out the refreshed index to the disk to optimize
future accesses to the working tree, but this could race with a
"read-write" operation that modify the index while it is running.
Detect such a race and avoid overwriting the index.
Duy raised a good point that we may need to do the same for the
normal writeout codepath, not just the "opportunistic" update
codepath. While that is true, nobody sane would be running two
simultaneous operations that are clearly write-oriented competing
with each other against the same index file. So in that sense that
can be done as a less urgent follow-up for this topic.
* ym/fix-opportunistic-index-update-race:
read-cache.c: verify index file before we opportunistically update it
wrapper.c: add xpread() similar to xread()
Instead of running N pair-wise diff-trees when inspecting a
N-parent merge, find the set of paths that were touched by walking
N+1 trees in parallel. These set of paths can then be turned into
N pair-wise diff-tree results to be processed through rename
detections and such. And N=2 case nicely degenerates to the usual
2-way diff-tree, which is very nice.
* ks/tree-diff-nway:
mingw: activate alloca
combine-diff: speed it up, by using multiparent diff tree-walker directly
tree-diff: rework diff_tree() to generate diffs for multiparent cases as well
Portable alloca for Git
tree-diff: reuse base str(buf) memory on sub-tree recursion
tree-diff: no need to call "full" diff_tree_sha1 from show_path()
tree-diff: rework diff_tree interface to be sha1 based
tree-diff: diff_tree() should now be static
tree-diff: remove special-case diff-emitting code for empty-tree cases
tree-diff: simplify tree_entry_pathcmp
tree-diff: show_path prototype is not needed anymore
tree-diff: rename compare_tree_entry -> tree_entry_pathcmp
tree-diff: move all action-taking code out of compare_tree_entry()
tree-diff: don't assume compare_tree_entry() returns -1,0,1
tree-diff: consolidate code for emitting diffs and recursion in one place
tree-diff: show_tree() is not needed
tree-diff: no need to pass match to skip_uninteresting()
tree-diff: no need to manually verify that there is no mode change for a path
combine-diff: move changed-paths scanning logic into its own function
combine-diff: move show_log_first logic/action out of paths scanning
The changes to make detection of endianness more portable had a bug
that breaks on (at least) Solaris x86.
The bug appears to be a simple copy/paste typo. It checks for
_BIG_ENDIAN and not _LITTLE_ENDIAN for both the case where we would
decide the system is big endian and little endian. Instead, the
second test should be for _LITTLE_ENDIAN and not _BIG_ENDIAN.
Two fixes were possible:
1. Change the negation order of the conditions in the second test.
2. Reverse the order of the conditions in the second test.
Use the second option so that the condition we expect is always a
positive check.
Signed-off-by: Ben Walton <bdwalton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous commit swaps the order we check the macros defined by
the compiler and the system headers from the original. Since the
order of check should not matter (i.e. it is insane to define both
__BIG_ENDIAN and friends and BIG_ENDIAN and friends and in a
conflicting way), it is the most conservative thing to do not to
change it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
SwitchToThread() only gives away the rest of the current time slice
to another thread in the current process. So if the thread that feeds
the file decscriptor we're polling is not in the current process, we
get busy-waiting.
I played around with this quite a bit. After trying some more complex
schemes, I found that what worked best is to just sleep 1 millisecond
between iterations. Though it's a very short time, it still completely
eliminates the busy wait condition, without hurting perf.
There code uses SleepEx(1, TRUE) to sleep. See this page for a good
discussion of why that is better than calling SwitchToThread, which
is what was used previously:
http://stackoverflow.com/questions/1383943/switchtothread-vs-sleep1
Note that calling SleepEx(0, TRUE) does *not* solve the busy wait.
The most striking case was when testing on a UNC share with a large repo,
on a single CPU machine. Without the fix, it took 4 minutes 15 seconds,
and with the fix it took just 1:08! I think it's because git-upload-pack's
busy wait was eating the CPU away from the git process that's doing the
real work. With multi-proc, the timing is not much different, but tons of
CPU time is still wasted, which can be a killer on a server that needs to
do bunch of other things.
I also tested the very fast local case, and didn't see any measurable
difference. On a big repo with 4500 files, the upload-pack took about 2
seconds with and without the fix.
[jc: this was first accepted in msysgit tree in May 2012 via a pull
request and Paolo Bonzini has also accepted the same fix to Gnulib
around the same time; see $gmane/247518 for a bit more detail]
Signed-off-by: Stepan Kasal <kasal@ucw.cz>
Acked-by: Johannes Sixt <j6t@kdbg.org>
Acked-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is a common mistake to call read(2)/pread(2) and forget to
anticipate that they may return error with EAGAIN/EINTR when the
system call is interrupted.
We have xread() helper to relieve callers of read(2) from having to
worry about it; add xpread() helper to do the same for pread(2).
Update the caller in the builtin/index-pack.c and the mmap emulation
in compat/.
Signed-off-by: Yiannis Marangos <yiannis.marangos@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Both MSVC and MINGW have alloca(3) definitions in malloc.h, so by moving
win32-compat alloca.h from compat/vcbuild/include/ to compat/win32/ ,
which is included by both MSVC and MINGW CFLAGS, we can make alloca()
work on both those Windows environments.
In MINGW, malloc.h has explicit check for GNUC and if it is so, defines
alloca to __builtin_alloca, so it looks like we don't need to add any
code to here-shipped alloca.h to get optimum performance.
Compile-tested on Windows in MSysGit.
Signed-off-by: Kirill Smelkov <kirr@mns.spb.ru>
Acked-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Most gmtime implementations return a NULL value when they
encounter an error (and this behavior is specified by ANSI C
and POSIX). FreeBSD's implementation, however, will simply
leave the "struct tm" untouched. Let's also recognize this
and convert it to a NULL (with this patch, t4212 should pass
on FreeBSD).
Reported-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach the clink.pl script that -lcurl is a request to link with the
cURL library, and drop NO_CURL from config.mak.uname for the MSVC
platform.
Signed-off-by: Marat Radchenko <marat@slonopotamus.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We started using wildmatch() in place of fnmatch(3); complete the
process and stop using fnmatch(3).
* nd/no-more-fnmatch:
actually remove compat fnmatch source code
stop using fnmatch (either native or compat)
Revert "test-wildmatch: add "perf" command to compare wildmatch and fnmatch"
use wildmatch() directly without fnmatch() wrapper
Borrow the bitmap index into packfiles from JGit to speed up
enumeration of objects involved in a commit range without having to
fully traverse the history.
* jk/pack-bitmap: (26 commits)
ewah: unconditionally ntohll ewah data
ewah: support platforms that require aligned reads
read-cache: use get_be32 instead of hand-rolled ntoh_l
block-sha1: factor out get_be and put_be wrappers
do not discard revindex when re-preparing packfiles
pack-bitmap: implement optional name_hash cache
t/perf: add tests for pack bitmaps
t: add basic bitmap functionality tests
count-objects: recognize .bitmap in garbage-checking
repack: consider bitmaps when performing repacks
repack: handle optional files created by pack-objects
repack: turn exts array into array-of-struct
repack: stop using magic number for ARRAY_SIZE(exts)
pack-objects: implement bitmap writing
rev-list: add bitmap mode to speed up object lists
pack-objects: use bitmaps when packing objects
pack-objects: split add_object_entry
pack-bitmap: add support for bitmap indexes
documentation: add documentation for the bitmap format
ewah: compressed bitmap implementation
...
Commit d60c49c (read-cache.c: allow unaligned mapping of the
index file, 2012-04-03) introduced helpers to access
unaligned data. However, we already have get_be32, which has
a few advantages:
1. It's already written, so we avoid duplication.
2. It's probably faster, since it does the endian
conversion and the alignment fix at the same time.
3. The get_be32 code is well-tested, having been in
block-sha1 for a long time. By contrast, our custom
helpers were probably almost never used, since the user
needed to manually define a macro to enable them.
We have to add a get_be16 implementation to the existing
get_be32, but that is very simple to do.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The BLK_SHA1 code has optimized wrappers for doing endian
conversions on memory that may not be aligned. Let's pull
them out so that we can use them elsewhere, especially the
time-tested list of platforms that prefer each strategy.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 0b6806b9 ("xread, xwrite: limit size of IO to 8MB"), this
wrapper is no longer needed, as read and write are already split
into small chunks.
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On Windows the convention is to rely on filename extensions to decide
whether a file is executable so Windows users are probably not relying
on the executable bit of these scripts, but on other platforms it can
be useful documentation.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The POSIX standard doesn't currently define a `ntohll`/`htonll`
function pair to perform network-to-host and host-to-network
swaps of 64-bit data. These 64-bit swaps are necessary for the on-disk
storage of EWAH bitmaps if they are not in native byte order.
Many thanks to Ramsay Jones <ramsay@ramsay1.demon.co.uk> and
Torsten Bögershausen <tboegi@web.de> for cygwin/mingw/msvc
portability fixes.
Signed-off-by: Vicent Marti <tanoku@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Correct all hits from
git grep -e '\(&&\|||\)[^ ]' -e '[^ ]\(&&\|||\)' -- '*.c'
i.e. && or || operators that are followed by anything but a SP,
or that follow something other than a SP or a HT, so that these
operators have a SP around it when necessary.
We usually refrain from making this kind of a tree-wide change in
order to avoid unnecessary conflicts with other "real work" patches,
but in this case, the end result does not have a potentially
cumbersome tree-wide impact, while this is a tree-wide cleanup.
Fixes to compat/regex/regcomp.c and xdiff/xemit.c are to replace a
HT immediately after && with a SP.
This is based on Felipe's patch to bultin/symbolic-ref.c; I did all
the finding out what other files in the whole tree need to be fixed
and did the fix and also the log message while reviewing that single
liner, so any screw-ups in this version are mine.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* kb/msvc-compile:
Windows: do not redefine _WIN32_WINNT
MinGW: Fix stat definitions to work with MinGW runtime version 4.0
MSVC: fix stat definition hell
MSVC: fix compile errors due to macro redefinitions
MSVC: fix compile errors due to missing libintl.h
On MacOS X, we detected if the filesystem needs the "pre-composed
unicode strings" workaround, but did not automatically enable it.
Now we do.
* tb/precompose-autodetect-fix:
Set core.precomposeunicode to true on e.g. HFS+
With MinGW runtime version 4.0 this interferes with the previous
definition from sdkddkver.h.
Signed-off-by: Sebastian Schuberth <sschuberth@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In msvc.h, there's a couple of stat related functions defined diffently
from mingw.h. When we remove these definitions, the only problem we get is
"warning C4005: '_stati64' : macro redefinition" for this line in mingw.h:
#define _stati64(x,y) mingw_stat(x,y)
The reason is that as of MSVCR80.dll (distributed with MSVC 2005), the
original _stati64 family of functions was renamed to _stat32i64, and the
former function names became macros (pointing to the appropriate function
based on the definition of _USE_32BIT_TIME_T).
Defining _stati64 works on MinGW because MinGW by default compiles against
the MSVCRT.DLL that is part of Windows (i.e. _stati64 is a function rather
than a macro).
Note: MinGW *can* compile for newer MSVC runtime versions, and MSVC
apparently can also compile for the Windows MSVCRT.DLL via the DDK (see
http://www.syndicateofideas.com/posts/fighting-the-msvcrt-dll-hell ).
Remove the stat definitions from msvc.h, as they are not compiler related.
In mingw.h, determine the runtime version in use from the definitions of
_stati64 and _USE_32BIT_TIME_T, and define stat() accordingly.
This also fixes that stat() in MSVC builds still resolves to mingw_lstat()
instead of mingw_stat().
Signed-off-by: Karsten Blees <blees@dcon.de>
Acked-by: Sebastian Schuberth <sschuberth@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Skip errno.h definitions if they are already defined.
Signed-off-by: Karsten Blees <blees@dcon.de>
Acked-by: Sebastian Schuberth <sschuberth@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Send a large request to read(2)/write(2) as a smaller but still
reasonably large chunks, which would improve the latency when the
operation needs to be killed and incidentally works around broken
64-bit systems that cannot take a 2GB write or read in one go.
* sp/clip-read-write-to-8mb:
Revert "compat/clipped-write.c: large write(2) fails on Mac OS X/XNU"
xread, xwrite: limit size of IO to 8MB
* da/darwin:
OS X: Fix redeclaration of die warning
Makefile: Fix APPLE_COMMON_CRYPTO with BLK_SHA1
imap-send: use Apple's Security framework for base64 encoding
When core.precomposeunicode was introduced in 76759c7d,
it was set to false on a unicode decomposing file system like HFS+
to be compatible with older versions of Git.
The Mac OS users need to find out that this configuration exist
and change it manually from false to true.
A smoother workflow can be achieved,
so set core.precomposeunicode to true on a decomposing file system.
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This reverts commit 6c642a8786.
The previous commit introduced a size limit on IO chunks on all
platforms. The compat clipped_write() is not needed anymore.
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This may happen when `git gc --auto` is run automatically, then the
user, to avoid wait time, switches to a new terminal, keeps working
and `git gc --auto` is started again because the first gc instance has
not clean up the repository.
This patch tries to avoid multiple gc running, especially in --auto
mode. In the worst case, gc may be delayed 12 hours if a daemon reuses
the pid stored in gc.pid.
kill(pid, 0) support is added to MinGW port so it should work on
Windows too.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Cygwin port added a "not quite correct but a lot faster and good
enough for many lstat() calls that are only used to see if the
working tree entity matches the index entry" lstat() emulation some
time ago, and it started biting us in places. This removes it and
uses the standard lstat() that comes with Cygwin.
Recent topic that uses lstat on packed-refs file is broken when
this cheating lstat is used, and this is a simplest fix that is
also the cleanest direction to go in the long run.
* rj/cygwin-clarify-use-of-cheating-lstat:
cygwin: Remove the Win32 l/stat() implementation
Use Apple's supported functions for base64 encoding instead
of the deprecated OpenSSL functions.
Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This reverts commit ec535cc27e.
POSIX explicitly states "the [environ] variable, which
must be declared by the user if it is to be used directly".
Not declaring it causes compilation to fail on OS X.
Instead don't declare the variable on MinGW, as it causes
a spurious warning there.
Signed-off-by: Benoit Sigoure <tsunanet@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit adbc0b6b ("cygwin: Use native Win32 API for stat", 30-09-2008)
added a Win32 specific implementation of the stat functions. In order
to handle absolute paths, cygwin mount points and symbolic links, this
implementation may fall back on the standard cygwin l/stat() functions.
Also, the choice of cygwin or Win32 functions is made lazily (by the
first call(s) to l/stat) based on the state of some config variables.
Unfortunately, this "schizophrenic stat" implementation has been the
source of many problems ever since. For example, see commits 7faee6b8,
79748439, 452993c2, 085479e7, b8a97333, 924aaf3e, 05bab3ea and 0117c2f0.
In order to avoid further problems, such as the issue raised by the new
reference handling API, remove the Win32 l/stat() implementation.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update build for Cygwin 1.[57]. Torsten Bögershausen reports that
this is fine with Cygwin 1.7 ($gmane/225824) so let's try moving it
ahead.
* rj/mingw-cygwin:
cygwin: Remove the CYGWIN_V15_WIN32API build variable
mingw: rename WIN32 cpp macro to GIT_WINDOWS_NATIVE
Returning the SIGALRM handler for SIGINT is not very useful.
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mac OS X does not like to write(2) more than INT_MAX number of
bytes.
* fc/macos-x-clipped-write:
compate/clipped-write.c: large write(2) fails on Mac OS X/XNU
Due to a bug in the Darwin kernel, write(2) calls have a maximum size
of INT_MAX bytes.
Introduce a new compat function, clipped_write(), that only writes
at most INT_MAX bytes and returns the number of bytes written, as
a substitute for write(2), and allow platforms that need this to
enable it from the build mechanism with NEEDS_CLIPPED_WRITE.
Set it for Mac OS X by default. It may be necessary to include this
function on Windows, too.
Signed-off-by: Filipe Cabecinhas <filcab+git@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 380a4d92 ("Update cygwin.c for new mingw-64 win32 api headers",
11-11-2012) solved an header include order problem on cygwin 1.7 when
using the new mingw-64 WIN32 API headers. The solution involved using
a new build variable (V15_MINGW_HEADERS) to conditionally compile the
cygwin.c source file to use an include order appropriate for the old
and new header files. (The build variable was later renamed in commit
9fca6cff to CYGWIN_V15_WIN32API).
The include order used for cygwin 1.7 includes the "win32.h" header
before "../git-compat-util.h". This order was problematic on cygwin
1.5, since it lead to the WIN32 symbol being defined along with the
inclusion of some WIN32 API headers (e.g. <winsock2.h>) which cause
compilation errors.
The header include order problem on cygwin 1.5 has since been fixed
(see commit "mingw: rename WIN32 cpp macro to GIT_WINDOWS_NATIVE"),
so we can now remove the conditional compilation along with the
associated CYGWIN_V15_WIN32API build variable.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Throughout git, it is assumed that the WIN32 preprocessor symbol is
defined on native Windows setups (mingw and msvc) and not on Cygwin.
On Cygwin, most of the time git can pretend this is just another Unix
machine, and Windows-specific magic is generally counterproductive.
Unfortunately Cygwin *does* define the WIN32 symbol in some headers.
Best to rely on a new git-specific symbol GIT_WINDOWS_NATIVE instead,
defined as follows:
#if defined(WIN32) && !defined(__CYGWIN__)
# define GIT_WINDOWS_NATIVE
#endif
After this change, it should be possible to drop the
CYGWIN_V15_WIN32API setting without any negative effect.
[rj: %s/WINDOWS_NATIVE/GIT_WINDOWS_NATIVE/g ]
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Sparse issues 68 errors (two errors for each main() function) such
as the following:
SP git.c
git.c:510:5: error: too many arguments for function mingw_main
git.c:510:5: error: symbol 'mingw_main' redeclared with different type \
(originally declared at git.c:510) - different argument counts
The errors are caused by the 'main' macro used by the MinGW build
to provide a replacement main() function. The original main function
is effectively renamed to 'mingw_main' and is called from the new
main function. The replacement main is used to execute certain actions
common to all git programs on MinGW (e.g. ensure the standard I/O
streams are in binary mode).
In order to suppress the errors, we change the macro to include the
parameters in the declaration of the mingw_main function.
Unfortunately, this change provokes both sparse and gcc to complain
about 9 calls to mingw_main(), such as the following:
CC git.o
git.c: In function 'main':
git.c:510: warning: passing argument 2 of 'mingw_main' from \
incompatible pointer type
git.c:510: note: expected 'const char **' but argument is of \
type 'char **'
In order to suppress these warnings, since both of the main
functions need to be declared with the same prototype, we
change the declaration of the 9 main functions, thus:
int main(int argc, char **argv)
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Sparse issues the following warnings:
SP compat/mingw.c
compat/mingw.c:795:3: warning: symbol 'pinfo_t' was not declared. \
Should it be static?
compat/mingw.c:796:16: warning: symbol 'pinfo' was not declared. \
Should it be static?
compat/mingw.c:797:18: warning: symbol 'pinfo_cs' was not declared. \
Should it be static?
compat/mingw.c:1207:23: warning: Using plain integer as NULL pointer
In 'pinfo_t' variable, defined on line 795, seems to have been a
mistake (a missing typedef keyword?), so we simply remove it.
The 'pinfo' variable does not require more than file scope, so we
simply add the static modifier to the declaration.
The 'pinfo_cs' variable, in contrast, requires initialisation in the
mingw replacement main() function, so we add an extern declaration to
the compat/mingw.h header file.
The remaining warning is suppressed by replacing the rhs of the
pointer assignment with the NULL pointer literal.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Sparse issues two 'Using plain integer as NULL pointer' warnings
against the call to the CreateFileMapping() function. The warnings
relate to the second and sixth parameters, which both have pointer
type. In order to suppress the warnings, we simply pass the NULL
pointer, rather than '0', to those parameters in the function call.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Sparse issues an 'Using plain integer as NULL pointer' warning when
passing the constant '0' as the second parameter in the call to the
WSAEventSelect() function. The function parameter has a pointer type
(WSAEVENT, aka HANDLE, aka void *) so that, in order to suppress the
warning, we simply pass NULL for that parameter in the function call
expression.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Sparse issues a 'Using plain integer as NULL pointer' warning when
initializing an pthread_t structure with an '{ 0 }' initializer.
The first field of the pthread_t structure has type HANDLE (void *),
so in order to suppress the warning, we replace the initializer
expression with '{ NULL }'.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The gitunsetenv function includes an (redundant) declaration of the
'environ' symbol, which is a pointer to the table of environment
variables. Unfortunately, on MinGW, this provokes sparse to issue
the following warning:
compat/unsetenv.c:5:20: warning: non-ANSI function declaration of \
function '__p__environ'
On MinGW, the <stdlib.h> header defines the 'environ' symbol as a
preprocessor macro (via _environ) which obtains the environ table
pointer via a call to the __p__environ() function.
In order to suppress the warning, we simply remove the redundant
declaration of the 'environ' symbol, since the symbol is already
declared correctly in <stdlib.h> (included via git-compat-util.h).
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On linux, when the build variable USE_NED_ALLOCATOR is set, gcc
issues the following warnings:
In file included from compat/nedmalloc/nedmalloc.c:63:
.../malloc.c.h: In function 'mmap_resize':
.../malloc.c.h:3762: warning: implicit declaration of function 'mremap'
.../malloc.c.h: In function 'sys_trim':
.../malloc.c.h:4195: warning: comparison between pointer and integer
The warnings are caused by the <sys/mman.h> header not enabling the
(conditional) declaration of the mremap() function. The declaration
can be enabled by defining the _GNU_SOURCE symbol prior to including
certain system header files. In particular, it may not be sufficient
to simply define _GNU_SOURCE just prior to including the <sys/mman.h>
header. (e.g. defining the symbol after including <sys/types.h> will
be completely ineffective.)
In order to suppress the warnings, we define the _GNU_SOURCE symbol
at the start of the malloc.c.h header file.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Sparse issues many "Using plain integer as NULL pointer" warnings
while checking nedmalloc.c (at least 98 such warnings before giving
up due to "too many warnings"). In addition, sparse issues some
"non-ANSI function declaration" type warnings for the symbols
'win32_getcurrentthreadid', 'malloc_stats' and 'malloc_footprint'.
In order to suppress the NULL pointer warnings, rather than replace
all uses of '0' as a null pointer representation with NULL, we add
-Wno-non-pointer-null to SPARSE_FLAGS while checking nedmalloc.c.
In order to suppress the "non-ANSI function declaration" warnings,
we simply include the missing 'empty parameter list' prototype (void)
in the function declarations.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Sparse issues the following error and warnings:
SP compat/fnmatch/fnmatch.c
.../fnmatch.c:144:17: warning: Using plain integer as NULL pointer
.../fnmatch.c:238:67: warning: Using plain integer as NULL pointer
.../fnmatch.c:303:40: error: too many arguments for function getenv
The error is caused by the extern declaration for the getenv function
not including the function prototype. Without the prototype, sparse
effectively sees the declaration as 'char *getenv(void)'. In order to
suppress the error, we simply include the function prototype.
In order to suppress the warnings, we include the <stddef.h> header
which provides an appropriate definition of the NULL macro, rather
than using the (inappropriate) default definition at fnmatch.c:132.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Sparse issues an "Using plain integer as NULL pointer" warning along
with two "symbol was not declared. Should it be static?" type warnings
for the 'merge_state_with_log' and 'find_recover_state' functions.
In order to suppress the warnings, we replace the use of '0' as a null
pointer constant with NULL and add the static modifier to the function
definitions.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Correct common spelling mistakes in comments and tests
kwset: fix spelling in comments
precompose-utf8: fix spelling of "want" in error message
compat/nedmalloc: fix spelling in comments
compat/regex: fix spelling and grammar in comments
obstack: fix spelling of similar
contrib/subtree: fix spelling of accidentally
git-remote-mediawiki: spelling fixes
doc: various spelling fixes
fast-export: fix argument name in error messages
Documentation: distinguish between ref and offset deltas in pack-format
i18n: make the translation of -u advice in one go
Noticed using Lucas De Marchi's codespell tool.
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Acked-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Correct some typos found using Lucas De Marchi's codespell tool.
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Acked-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some of these were found using Lucas De Marchi's codespell tool.
Others noticed by Eric Sunshine.
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Acked-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Noticed using Lucas De Marchi's codespell tool.
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Acked-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When core.sharedRepository is used, set_shared_perm() in path.c
needs lstat() to return the correct POSIX permissions.
The default for cygwin is core.ignoreCygwinFSTricks = false, which
means that the fast implementation in do_stat() is used instead of
lstat().
lstat() under cygwin uses the Windows security model to implement
POSIX-like permissions. The user, group or everyone bits can be set
individually.
do_stat() simplifes the file permission bits, and may return a wrong
value. The read-only attribute of a file is used to calculate the
permissions, resulting in either rw-r--r-- or r--r--r--
One effect of the simplified do_stat() is that t1301 fails.
Add a function cygwin_get_st_mode_bits() which returns the POSIX
permissions. When not compiling for cygwin, true_mode_bits() in
path.c is used.
Side note:
t1301 passes under cygwin 1.5.
The "user write" bit is synchronized with the "read only" attribute
of a file:
$ chmod 444 x
$ attrib x
A R C:\temp\pt\x
cygwin 1.7 would show
A C:\temp\pt\x
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This reverts commit 78457bc0cc.
commit 28c5d9e ("vcs-svn: drop string_pool") previously removed
the only call-site for strtok_r. So let's get rid of the compat
implementation as well.
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In particular, while linking test-svn-fe.exe, the linker complains
that the external symbol _strtoull is unresolved. A call to this
function was added in commit ddcc8c5b ("vcs-svn: skeleton of an svn
delta parser", 25-12-2010).
The NO_STRTOULL build variable attempts to provide support to old
systems which can't even declare 'unsigned long long' variables,
let alone provide the strtoll() or strtoull() functions. Setting
this build variable does not provide an implementation of these
functions. Rather, it simply allows the compat implementations
of strto{i,u}max() to use strtol() and strtoul() instead.
In order to fix the linker error on systems with NO_STRTOULL set,
currently MSVC and OSF1, we can substitute a call to strtoumax().
However, we can easily provide support for the strtoull() and
strtoll() functions on MSVC, since they are essentially already
available as _strtoui64() and _strtoi64(). This allows us to
remove NO_STRTOULL for MSVC.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Tested-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In particular, remote-testsvn.c fails to compile with two
undeclared identifier errors relating to the 'UINT32_MAX'
and 'STDIN_FILENO' symbols.
In order to fix the compilation errors, we add appropriate
definitions for the UINT32_MAX and STDIN_FILENO constants
to an msvc compat header file.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Tested-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 0f77dea9 ("mingw: move poll out of sys-folder", 24-10-2011), along
with other commits in the 'ef/mingw-upload-archive' branch (see commit
7406aa20), effectively reintroduced the same problem addressed by commit
56fb3ddc ("msvc: Fix compilation errors in compat/win32/sys/poll.c",
04-12-2010).
In order to fix the compilation errors, we use the same solution adopted
in that earlier commit. In particular, we set _WIN32_WINNT to 0x0502
(which would target Windows Server 2003) prior to including the winsock2.h
header file.
Also, we delete the compat/vcbuild/include/sys/poll.h header file, since
it is now redundant and it's presence may cause some confusion.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Tested-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allows pathname patterns in .gitignore and .gitattributes files
with double-asterisks "foo/**/bar" to match any number of directory
hierarchies.
* nd/wildmatch:
wildmatch: replace variable 'special' with better named ones
compat/fnmatch: respect NO_FNMATCH* even on glibc
wildmatch: fix "**" special case
t3070: Disable some failing fnmatch tests
test-wildmatch: avoid Windows path mangling
Support "**" wildcard in .gitignore and .gitattributes
wildmatch: make /**/ match zero or more directories
wildmatch: adjust "**" behavior
wildmatch: fix case-insensitive matching
wildmatch: remove static variable force_lower_case
wildmatch: make wildmatch's return value compatible with fnmatch
t3070: disable unreliable fnmatch tests
Integrate wildmatch to git
wildmatch: follow Git's coding convention
wildmatch: remove unnecessary functions
Import wildmatch from rsync
ctype: support iscntrl, ispunct, isxdigit and isprint
ctype: make sane_ctype[] const array
Conflicts:
Makefile
We try to avoid touching borrowed code, but we encourage people to
write without old-style definition and compile with -Werror these
days, and on platforms that need to use NO_FNMATCH, these three
functions make the compilation fail.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On MinGW, GCC 4.7.2 complains about
operation on 'p->m[end]' may be undefined
Fix this by replacing the faulty lines with those of 69825ca from
https://github.com/ned14/nedmalloc/blob/master/nedmalloc.c
Signed-off-by: Sebastian Schuberth <sschuberth@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
MinGW has a workaround when rmdir unnecessarily fails to retry with
a prompt, but the logic was kicking in when the rmdir failed with
ENOTEMPTY, i.e. was expected to fail and there is no point retrying.
* ef/mingw-rmdir:
mingw_rmdir: do not prompt for retry when non-empty
in ab1a11be ("mingw_rmdir: set errno=ENOTEMPTY when appropriate"),
a check was added to prevent us from retrying to delete a directory
that is both in use and non-empty.
However, this logic was slightly flawed; since we didn't return
immediately, we end up falling out of the retry-loop, but right into
the prompting-loop.
Fix this by setting errno, and guarding the prompting-loop with an
errno-check.
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There's no remaining call-sites, and as pointed out in the
previous commit message, it's not quite ideal. So let's just
lose it.
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The getpass-implementation we use on Windows isn't at all ideal;
it works in raw-mode (as opposed to cooked mode), and as a result
does not deal correcly with deletion, arrow-keys etc.
Instead, use cooked mode to read a line at the time, allowing the
C run-time to process the input properly.
Since we set files to be opened in binary-mode by default on
Windows, introduce a FORCE_TEXT macro that expands to the "t"
modifier that forces the terminal to be opened in text-mode so we
do not have to deal with CRLF issues.
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On Windows, the terminal cannot be opened in read-write mode, so
we need distinct pairs for reading and writing. Since this works
fine on other platforms as well, always open them in pairs.
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By moving the echo-disabling code to a separate function, we can
implement OS-specific versions of it for non-POSIX platforms.
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
