The test suite had a blindspot where it did not check the behavior of
range-diff and format-patch when notes were present. Cover this
blindspot.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For test cases, the usual convention is to name expected output files
"expect", not "expected". Replace all instances of "expected" with
"expect".
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the first heredoc, parameter substitution is not used so prevent it
from happening in the future (perhaps by accident) by escaping the limit
EOF.
The remaining heredocs use parameter substitution so they cannot be
changed.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For shell scripts, the usual convention is for there to be no space
after redirection operators, (e.g. `>file`, not `> file`). Remove the
one instance of this.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Python's async functions (declared with "async def" rather than "def")
were not being displayed in hunk headers. This commit teaches git about
the async function syntax, and adds tests for the Python userdiff regex.
Signed-off-by: Josh Holland <anowlcalledjosh@gmail.com>
Acked-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In order to work correctly, git-rebase --rebase-merges needs to make
initial todo list with unique labels.
Those unique labels is being handled by employing a hashmap and
appending an unique number if any duplicate is found.
But, we forget that beside those labels for side branches,
we also have a special label `onto' for our so-called new-base.
In a special case that any of those labels for side branches named
`onto', git will run into trouble.
Correct it.
Signed-off-by: Doan Tran Cong Danh <congdanhqx@gmail.com>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ever since it was introduced in 7cceca5ccc (Add 'git rev-parse
--show-toplevel' option., 2010-01-12), the --show-toplevel option has
treated a missing working tree as a quiet success: it neither prints a
toplevel path, but nor does it report any kind of error.
While a caller could distinguish this case by looking for an empty
response, the behavior is rather confusing. We're better off complaining
that there is no working tree, as other internal commands would do in
similar cases (e.g., "git status" or any builtin with NEED_WORK_TREE set
would just die()). So let's do the same here.
While we're at it, let's clarify the documentation and add some tests,
both for the new behavior and for the more mundane case (which was not
covered).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `label` todo command in interactive rebases creates temporary refs
in the `refs/rewritten/` namespace. These refs are stored as loose refs,
i.e. as files in `.git/refs/rewritten/`, therefore they have to conform
with file name limitations on the current filesystem in addition to the
accepted ref format.
This poses a problem in particular on NTFS/FAT, where e.g. the colon,
double-quote and pipe characters are disallowed as part of a file name.
Let's safeguard against this by replacing not only white-space
characters by dashes, but all non-alpha-numeric ones.
However, we exempt non-ASCII UTF-8 characters from that, as it should be
quite possible to reflect branch names such as `↯↯↯` in refs/file names.
Signed-off-by: Matthew Rogers <mattr94@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This imitates the code to show the help text from the Perl script
`git-add--interactive.perl` in the built-in version.
To make sure that it renders exactly like the Perl version of `git add
-i`, we also add a test case for that to `t3701-add-interactive.sh`.
Signed-off-by: Slavica Đukić <slawica92@hotmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There's a cross-site scripting problem in gitweb, where it will print
URLs generated by its href() helper without further quoting. This allows
an attacker to point a victim to a specially crafted gitweb URL and
inject arbitrary HTML into the resulting page (which the victim sees as
coming from gitweb).
The base of the URL comes from evaluate_uri(), which pulls the value of
$REQUEST_URI via the CGI module. It tries to strip off $PATH_INFO, but
fails to do so in some cases (including ones that contain special
characters, like "+"). Most of the uses of the URL end up being passed
to "$cgi->a(-href = href())", which will get quoted properly by the CGI
module. But in a few places, we output them ourselves as part of
manually-generated HTML, and whatever was in the original URL will
appear unquoted in the output.
Given that all of the nearby variables placed into this manual HTML
_are_ quoted, it seems like the authors assumed that these URLs would
not need quoting. So it's possible that the bug is actually in
evaluate_uri(), which should be doing a more careful job of stripping
$PATH_INFO. There's some discussion in a comment in that function, as
well as the commit message in 81d3fe9f48 (gitweb: fix wrong base URL
when non-root DirectoryIndex, 2009-02-15). But I'm not sure I understand
it.
Regardless, it's a good idea to quote these values at the point of
insertion into the HTML output:
1. Even if there is a bug in evaluate_uri(), this would give us
belt-and-suspenders protection.
2. evaluate_uri() is only handling the base. Some generated URLs will
also mention arbitrary refs or filenames in the repositories, and
these should be quoted anyway.
3. It should never _hurt_ to quote (and that's what all of the
$cgi->a() calls are doing already).
So there may be further work here, but this patch at least prevents the
XSS vulnerability, and shouldn't make anything worse.
The test here covers the calls in print_feed_meta(), but I manually
audited every call to href() to see how its output was used, and quoted
appropriately. Most of them are esc_attr(), as they're used in tag
attributes, but I used esc_html() when the URLs were printed bare. The
distinction is largely academic, as one is implemented as a wrapper for
the other.
Reported-by: NAKAYAMA DAISUKE <nakyamad@icloud.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a real webserver's CGI call, gitweb.cgi would typically see
$REQUEST_URI set. This variable does impact how we display our URL in
the resulting page, so let's try to make our test as realistic as
possible (we can just use the $PATH_INFO our caller passed in, if any).
This doesn't change the outcome of any tests, but it will help us add
some new tests in a future patch.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some variables assignments in gitweb_run() look like this:
FOO=""$1""
The extra quotes aren't doing anything. Each set opens and closes an
empty string, and $1 is actually outside of any double-quotes (which is
OK, because variable assignment does not do whitespace splitting on the
expanded value).
Let's drop them, as they're simply confusing.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function is just a thin wrapper around gitweb_run(), which takes
multiple arguments. But we only pass along "$1". Let's pass everything
we get, which will let a future patch add an XSS test that affects
PATH_INFO (which gitweb_run() takes as $2).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We try to delete the non-existing tag "anothertag", but for the
verifications, we check that the tag "myhead" doesn't exist. "myhead"
isn't used in this test except for this checking. Comparing to the test
two tests earlier, it looks like a copy-paste mistake.
Perhaps it's overkill to check that `git tag -d` didn't decide to
*create* a tag. But since we're trying to be this careful, let's
actually check the correct tag. While we're doing this, let's use a more
descriptive tag name instead -- "nonexistingtag" should be obvious.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Unlike previous conversions to C, where we started with a built-in
helper, we start this conversion by adding an interception in the
`run_add_interactive()` function when the new opt-in
`add.interactive.useBuiltin` config knob is turned on (or the
corresponding environment variable `GIT_TEST_ADD_I_USE_BUILTIN`), and
calling the new internal API function `run_add_i()` that is implemented
directly in libgit.a.
At this point, the built-in version of `git add -i` only states that it
cannot do anything yet. In subsequent patches/patch series, the
`run_add_i()` function will gain more and more functionality, until it
is feature complete. The whole arc of the conversion can be found in the
PRs #170-175 at https://github.com/gitgitgadget/git.
The "--helper approach" can unfortunately not be used here: on Windows
we face the very specific problem that a `system()` call in
Perl seems to close `stdin` in the parent process when the spawned
process consumes even one character from `stdin`. Which prevents us from
implementing the main loop in C and still trying to hand off to the Perl
script.
The very real downside of the approach we have to take here is that the
test suite won't pass with `GIT_TEST_ADD_I_USE_BUILTIN=true` until the
conversion is complete (the `--helper` approach would have let it pass,
even at each of the incremental conversion steps).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 'do_apply_stash()' we refresh the index in the end. Since
34933d0eff ("stash: make sure to write refreshed cache", 2019-09-11),
we also write that refreshed index when --quiet is given to 'git stash
apply'.
However if '--index' is not given to 'git stash apply', we also
discard the index in the else clause just before. We need to do so
because we use an external 'git update-index --add --stdin', which
leads to an out of date in-core index.
Later we call 'refresh_and_write_cache', which now leads to writing
the discarded index, which means we essentially write an empty index
file. This is obviously not correct, or the behaviour the user
wanted. We should not modify the users index without being asked to
do so.
Make sure to re-read the index after discarding the current in-core
index, to avoid dealing with outdated information. Instead we could
also drop the 'discard_cache()' + 'read_cache()', however that would
make it easy to fall into the same trap as 34933d0eff did, so it's
better to avoid that.
We can also drop the 'refresh_and_write_cache' completely in the quiet
case. Previously in legacy stash we relied on 'git status' to refresh
the index after calling 'git read-tree' when '--index' was passed to
'git apply'. However the 'reset_tree()' call that replaced 'git
read-tree' always passes options that are equivalent to '-m', making
the refresh of the index unnecessary.
Reported-by: Grzegorz Rajchman <rayman17@gmail.com>
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'git commit-graph read' subcommand is used in test scripts to check
that the commit-graph contents match the expected data. Mostly, this
helps check the header information and the list of chunks. Users do not
need this information, so move the functionality to a test helper.
Reported-by: Bryan Turner <bturner@atlassian.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With './t1234-foo.sh -r 5,6' we can run only specific test cases in a
test script, but our test framwork still evaluates all lazy prereqs
that the excluded test cases might depend on. This is unnecessary and
produces verbose and trace output that can be distracting. This has
been an issue ever since the '-r|--run=' options were introduced in
0445e6f0a1 (test-lib: '--run' to run only specific tests, 2014-04-30),
because that commit added the check of the list of test cases
specified with '-r' after evaluating the prereqs.
Avoid this unnecessary prereq evaluation by checking the list of test
cases specified with '-r' before looking at the prereqs.
Note that GIT_SKIP_TESTS has always been checked before the prereqs,
so prereqs necessary for tests skipped that way were not evaluated.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When git commands are placed in the upstream of a pipe, their return
codes are lost. In this particular case, it is especially bad since we
are testing the intricacies of `git log --graph` behavior and if we hit
an unexpected failure or segfault, we want to know this.
Extract the common output checking logic into check_graph() where we
redirect the output of git commands upstream of pipe into a file and
have sed read from that file so that git failures are detected.
This patch is best viewed with `--color-moved`.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch fixes an extreme slowdown in pack-objects when you have more
than 1023 packs. See below for numbers.
Since 43fa44fa3b (pack-objects: move in_pack out of struct object_entry,
2018-04-14), we use a complicated system to save some per-object memory.
Each object_entry structs gets a 10-bit field to store the index of the
pack it's in. We map those indices into pointers using
packing_data->in_pack_by_idx, which we initialize at the start of the
program. If we have 2^10 or more packs, then we instead create an array
of pack pointers, one per object. This is packing_data->in_pack.
So far so good. But there's one other tricky case: if a new pack arrives
after we've initialized in_pack_by_idx, it won't have an index yet. We
solve that by calling oe_map_new_pack(), which just switches on the fly
to the less-optimal in_pack mechanism, allocating the array and
back-filling it for already-seen objects.
But that logic kicks in even when we've switched to it already (whether
because we really did see a new pack, or because we had too many packs
in the first place). The result doesn't produce a wrong outcome, but
it's very slow. What happens is this:
- imagine you have a repo with 500k objects and 2000 packs that you
want to repack.
- before looking at any objects, we call prepare_in_pack_by_idx(). It
starts allocating an index for each pack. On the 1024th pack, it
sees there are too many, so it bails, leaving in_pack_by_idx as
NULL.
- while actually adding objects to the packing list, we call
oe_set_in_pack(), which checks whether the pack already has an
index. If it's one of the packs after the first 1023, then it
doesn't have one, and we'll call oe_map_new_pack().
But there's no useful work for that function to do. We're already
using in_pack, so it just uselessly walks over the complete list of
objects, trying to backfill in_pack.
And we end up doing this for almost 1000 packs (each of which may be
triggered by more than one object). And each time it triggers, we
may iterate over up to 500k objects. So in the absolute worst case,
this is quadratic in the number of objects.
The solution is simple: we don't need to bother checking whether the
pack has an index if we've already converted to using in_pack, since by
definition we're not going to use it. So we can just push the "does the
pack have a valid index" check down into that half of the conditional,
where we know we're going to use it.
The current test in p5303 sadly doesn't notice this problem, since it
maxes out at 1000 packs. If we add a new test to it at 2000 packs, it
does show the improvement:
Test HEAD^ HEAD
----------------------------------------------------------------------
5303.12: repack (2000) 26.72(39.68+0.67) 15.70(28.70+0.66) -41.2%
However, these many-pack test cases are rather expensive to run, so
adding larger and larger numbers isn't appealing. Instead, we can show
it off more easily by using GIT_TEST_FULL_IN_PACK_ARRAY, which forces us
into the absolute worst case: no pack has an index, so we'll trigger
oe_map_new_pack() pointlessly for every single object, making it truly
quadratic.
Here are the numbers (on git.git) with the included change to p5303:
Test HEAD^ HEAD
----------------------------------------------------------------------
5303.3: rev-list (1) 2.05(1.98+0.06) 2.06(1.99+0.06) +0.5%
5303.4: repack (1) 33.45(33.46+0.19) 2.75(2.73+0.22) -91.8%
5303.6: rev-list (50) 2.07(2.01+0.06) 2.06(2.01+0.05) -0.5%
5303.7: repack (50) 34.21(35.18+0.16) 3.49(4.50+0.12) -89.8%
5303.9: rev-list (1000) 2.87(2.78+0.08) 2.88(2.80+0.07) +0.3%
5303.10: repack (1000) 41.26(51.30+0.47) 10.75(20.75+0.44) -73.9%
Again, those improvements aren't realistic for the 1-pack case (because
in the real world, the full-array solution doesn't kick in), but it's
more useful to be testing the more-complicated code path.
While we're looking at this issue, we'll tweak one more thing: in
oe_map_new_pack(), we call REALLOC_ARRAY(pack->in_pack). But we'd never
expect to get here unless we're back-filling it for the first time, in
which case it would be NULL. So let's switch that to ALLOC_ARRAY() for
clarity, and add a BUG() to document the expectation. Unfortunately this
code isn't well-covered in the test suite because it's inherently racy
(it only kicks in if somebody else adds a new pack while we're in the
middle of repacking).
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The message file will be used as commit message for the
git-{am,rebase} --continue.
Signed-off-by: Doan Tran Cong Danh <congdanhqx@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
During rebasing, old merge's message (encoded in old encoding)
will be used as message for new merge commit (created by rebase).
In case of the value of i18n.commitencoding has been changed after the
old merge time. We will receive an unusable message for this new merge.
Correct it.
This change also notice a breakage with git-rebase label system.
Signed-off-by: Doan Tran Cong Danh <congdanhqx@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On fixup/squash-ing rebase, git will create new commit in
i18n.commitencoding, reencode the commit message to that said encode.
Signed-off-by: Doan Tran Cong Danh <congdanhqx@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On musl libc, ISO-2022-JP encoder is too eager to switch back to
1 byte encoding, musl's iconv always switch back after every combining
character. Comparing glibc and musl's output for this command
$ sed q t/t3900/ISO-2022-JP.txt| iconv -f ISO-2022-JP -t utf-8 |
iconv -f utf-8 -t ISO-2022-JP | xxd
glibc:
00000000: 1b24 4224 4f24 6c24 5224 5b24 551b 2842 .$B$O$l$R$[$U.(B
00000010: 0a .
musl:
00000000: 1b24 4224 4f1b 2842 1b24 4224 6c1b 2842 .$B$O.(B.$B$l.(B
00000010: 1b24 4224 521b 2842 1b24 4224 5b1b 2842 .$B$R.(B.$B$[.(B
00000020: 1b24 4224 551b 2842 0a .$B$U.(B.
Although musl iconv's output isn't optimal, it's still correct.
From commit 7d509878b8, ("pretty.c: format string with truncate respects
logOutputEncoding", 2014-05-21), we're encoding the message to utf-8
first, then format it and convert the message to the actual output
encoding on git commit --squash.
Thus, t3900::test_commit_autosquash_flags is failing on musl libc.
Reencode to utf-8 before arranging rebase's todo list.
By doing this, we also remove a breakage noticed by a test added in the
previous commit.
Signed-off-by: Doan Tran Cong Danh <congdanhqx@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We're using fixup!/squash! <subject> to mark if current commit will be
used to be fixed up or squashed to a previous commit.
However, if we're changing i18n.commitencoding after making the
original commit but before making the fixing up, we couldn't find the
original commit to do the fixup/squash.
Add a test to demonstrate that problem.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Doan Tran Cong Danh <congdanhqx@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git stash save" in a working tree that is sparsely checked out
mistakenly removed paths that are outside the area of interest.
* js/update-index-ignore-removal-for-skip-worktree:
stash: handle staged changes in skip-worktree files correctly
update-index: optionally leave skip-worktree entries alone
The custom format for "git log --format=<format>" learned the l/L
placeholder that is similar to e/E that fills in the e-mail
address, but only the local part on the left side of '@'.
* pb/pretty-email-without-domain-part:
pretty: add "%aL" etc. to show local-part of email addresses
t4203: use test-lib.sh definitions
t6006: use test-lib.sh definitions
Code clean-up and a bugfix in the logic used to tell worktree local
and repository global refs apart.
* sg/dir-trie-fixes:
path.c: don't call the match function without value in trie_find()
path.c: clarify two field names in 'struct common_dir'
path.c: mark 'logs/HEAD' in 'common_list' as file
path.c: clarify trie_find()'s in-code comment
Documentation: mention more worktree-specific exceptions
The code to generate multi-pack index learned to show (or not to
show) progress indicators.
* wb/midx-progress:
multi-pack-index: add [--[no-]progress] option.
midx: honor the MIDX_PROGRESS flag in midx_repack
midx: honor the MIDX_PROGRESS flag in verify_midx_file
midx: add progress to expire_midx_packs
midx: add progress to write_midx_file
midx: add MIDX_PROGRESS flag
When all files from some subdirectory were renamed to the root
directory, the directory rename heuristics would fail to detect that
as a rename/merge of the subdirectory to the root directory, which has
been corrected.
* en/merge-recursive-directory-rename-fixes:
t604[236]: do not run setup in separate tests
merge-recursive: fix merging a subdirectory into the root directory
merge-recursive: clean up get_renamed_dir_portion()
"git notes copy $original" ought to copy the notes attached to the
original object to HEAD, but a mistaken tightening to command line
parameter validation made earlier disabled that feature by mistake.
* dd/notes-copy-default-dst-to-head:
notes: fix minimum number of parameters to "copy" subcommand
t3301: test diagnose messages for too few/many paramters
"rebase -i" ceased to run post-commit hook by mistake in an earlier
update, which has been corrected.
* pw/post-commit-from-sequencer:
sequencer: run post-commit hook
move run_commit_hook() to libgit and use it there
sequencer.h fix placement of #endif
t3404: remove uneeded calls to set_fake_editor
t3404: set $EDITOR in subshell
t3404: remove unnecessary subshell
The branch description ("git branch --edit-description") has been
used to fill the body of the cover letters by the format-patch
command; this has been enhanced so that the subject can also be
filled.
* dl/format-patch-cover-from-desc:
format-patch: teach --cover-from-description option
format-patch: use enum variables
format-patch: replace erroneous and condition
Debugging support for lazy cloning has been a bit improved.
* jt/fetch-pack-record-refs-in-the-dot-promisor:
fetch-pack: write fetched refs to .promisor
Apply several spelling fixes that technically change what the tests are
executing, but do so in a way that is not tested and does not affect results
(e.g. modify the commit message to remove a typo, remove spelling mistakes
from refnames, etc.)
Reported-by: Jens Schleusener <Jens.Schleusener@fossies.org>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Adds support for xfuncref in Elixir[1] language which is Ruby-like
language that runs on Erlang[3] Virtual Machine (BEAM).
[1]: https://elixir-lang.org
[2]: https://www.erlang.org
Signed-off-by: Łukasz Niemier <lukasz@niemier.pl>
Acked-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In fetch_pack() (and all functions it calls), pass
OBJECT_INFO_SKIP_FETCH_OBJECT whenever we query an object that could be
a tree or blob that we do not want to be lazy-fetched even if it is
absent. Thus, the only lazy-fetches occurring for trees and blobs are
when resolving deltas.
Thus, we can remove fetch_if_missing=0 from builtin/fetch.c. Remove
this, and also add a test ensuring that such objects are not
lazy-fetched. (We might be able to remove fetch_if_missing=0 from other
places too, but I have limited myself to builtin/fetch.c in this commit
because I have not written tests for the other commands yet.)
Note that commits and tags may still be lazy-fetched. I limited myself
to objects that could be trees or blobs here because Git does not
support creating such commit- and tag-excluding clones yet, and even if
such a clone were manually created, Git does not have good support for
fetching a single commit (when fetching a commit, it and all its
ancestors would be sent).
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
man 1p printf:
In addition to the escape sequences shown in the Base Definitions
volume of POSIX.1‐2008, Chapter 5, File Format Notation ('\\',
'\a', '\b', '\f', '\n', '\r', '\t', '\v'), "\ddd", where ddd is a
one, two, or three-digit octal number, shall be written as a byte
with the numeric value specified by the octal number.
printf '\xfe\xff' is an extension of some shell.
Dash, a popular yet simple shell, do not implement this extension.
This wasn't caught by most people running the tests, even though
common shells like dash don't handle hex escapes, because their
systems don't trigger the NO_UTF16_BOM prereq. But systems with musl
libc do; when combined with dash, the test fails.
Correct it.
Signed-off-by: Doan Tran Cong Danh <congdanhqx@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix two test descriptions which stated "git -ls-files" when the actual
command being tested was "git ls-files".
Signed-off-by: Nathan Stocks <cleancut@github.com>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
No substantive changes, just a few cosmetic changes:
* Indent steps of an individual test
* Don't have logic between the "test_expect_success" blocks that
the next block will depend upon, move it into the
test_expect_success section itself
* Fix spacing around redirection operators to match git style
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When running Git commands quickly -- such as in a shell script or the
test suite -- the Git commands frequently complete and start again
during the same second. The example fsmonitor hooks to integrate with
Watchman truncate the nanosecond times to seconds. In principle, this is
fine, as Watchman claims to use inclusive comparisons [1]. The result
should only be an over-representation of the changed paths since the
last Git command.
However, Watchman's own documentation claims "Using a timestamp is prone
to race conditions in understanding the complete state of the file tree"
[2]. All of their documented examples use a "clockspec" that looks like
'c:123:234'. Git should eventually learn how to store this type of
string to provide a stronger integration, but that will be a more
invasive change.
When using GIT_TEST_FSMONITOR="$(pwd)/t7519/fsmonitor-watchman", scripts
such as t7519-wtstatus.sh fail due to these race conditions. In fact,
running any test script with GIT_TEST_FSMONITOR pointing at
t/t7519/fsmonitor-wathcman will cause failures in the test_commit
function. The 'git add "$indir$file"' command fails due to not enough
time between the creation of '$file' and the 'git add' command.
For now, subtract one second from the timestamp we pass to Watchman.
This will make our window large enough to avoid these race conditions.
Increasing the window causes tests like t7519-wtstatus.sh to pass.
When the integration was introduced in def437671 (fsmonitor: add a
sample integration script for Watchman, 2018-09-22), the query included
an expression that would ignore files created and deleted in that
window. The performance reason for this change was to ignore temporary
files created by a build between Git commands. However, this causes
failures in script scenarios where Git is creating or deleting files
quickly.
When using GIT_TEST_FSMONITOR as before, t2203-add-intent.sh fails
due to this add-and-delete race condition.
By removing the "expression" from the Watchman query, we remove this
race condition. It will lead to some performance degradation in the case
of users creating and deleting temporary files inside their working
directory between Git commands. However, that is a cost we need to pay
to be correct.
[1] https://github.com/facebook/watchman/blob/master/query/since.cpp#L35-L39
[2] https://facebook.github.io/watchman/docs/clockspec.html
Helped-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Kevin Willford <Kevin.Willford@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When calling `git stash` while changes were staged for files that are
marked with the `skip-worktree` bit (e.g. files that are excluded in a
sparse checkout), the files are recorded as _deleted_ instead.
The reason is that `git stash` tries to construct the tree reflecting
the worktree essentially by copying the index to a temporary one and
then updating the files from the worktree. Crucially, it calls `git
diff-index` to update also those files that are in the HEAD but have
been unstaged in the index.
However, when the temporary index is updated via `git update-index --add
--remove`, skip-worktree entries mark the files as deleted by mistake.
Let's use the newly-introduced `--ignore-skip-worktree-entries` option
of `git update-index` to prevent exactly this from happening.
Note that the regression test case deliberately avoids replicating the
scenario described above and instead tries to recreate just the symptom.
Reported by Dan Thompson.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While `git update-index` mostly ignores paths referring to index entries
whose skip-worktree bit is set, in b4d1690df1 (Teach Git to respect
skip-worktree bit (reading part), 2009-08-20), for reasons that are not
entirely obvious, the `--remove` option was made special: it _does_
remove index entries even if their skip-worktree bit is set.
Seeing as this behavior has been in place for a decade now, it does not
make sense to change it.
However, in preparation for fixing a bug in `git stash` where it
pretends that skip-worktree entries have actually been removed, we need
a mode where `git update-index` leaves all skip-worktree entries alone,
even if the `--remove` option was passed.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The comments for the staging/unstaging test did not accurately
describe the scenario being tested. It is not essential that
the test files being staged/unstaged appear at the end of the
index. All that is required is that the test files are not
flagged with CE_FSMONITOR_VALID and have a position in the
index greater than the number of entries in the index after
unstaging.
The comment for this test has been updated to be more
accurate with respect to the scenario that's being tested.
Signed-off-by: William Baker <William.Baker@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In many projects the number of contributors is low enough that users know
each other and the full email address doesn't need to be displayed.
Displaying only the author's username saves a lot of columns on the screen.
Existing 'e/E' (as in "%ae" and "%aE") placeholders would show the
author's address as "prarit@redhat.com", which would waste columns to show
the same domain-part for all contributors when used in a project internal
to redhat. Introduce 'l/L' placeholders that strip '@' and domain part from
the e-mail address.
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"worktree add" internally calls "reset --hard", but if
submodule.recurse is set, reset tries to recurse into
initialized submodules, which makes start_command try to
cd into non-existing submodule paths and die.
Fix that by making sure that the call to reset in "worktree add"
does not recurse.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ever since worktrees were introduced, the `git_path()` function _really_
needed to be called e.g. to get at the path to `logs/HEAD` (`HEAD` is
specific to the worktree, and therefore so is its reflog). However, the
wrong path is returned for `logs/HEAD.lock`.
This does not matter as long as the Git executable is doing the asking,
as the path for that `logs/HEAD.lock` file is constructed from
`git_path("logs/HEAD")` by appending the `.lock` suffix.
However, Git GUI just learned to use `--git-path` instead of appending
relative paths to what `git rev-parse --git-dir` returns (and as a
consequence not only using the correct hooks directory, but also using
the correct paths in worktrees other than the main one). While it does
not seem as if Git GUI in particular is asking for `logs/HEAD.lock`,
let's be safe rather than sorry.
Side note: Git GUI _does_ ask for `index.lock`, but that is already
resolved correctly, due to `update_common_dir()` preferring to leave
unknown paths in the (worktree-specific) git directory.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Without this, you cannot use `--run=<...>` to skip that part, and a run
with `--run=0` (which is a common way to determine the test case number
corresponding to a given test case title).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 90cf590f53 (fsck: optionally show more helpful info for broken
links, 2016-07-17) added a system for decorating objects with names. The
code is split across builtin/fsck.c (which gives the initial names) and
fsck.c (which adds to the names as it traverses the object graph). This
leads to some duplication, where both sites have near-identical
describe_object() functions (the difference being that the one in
builtin/fsck.c uses a circular array of buffers to allow multiple calls
in a single printf).
Let's provide a unified object_name API for fsck. That lets us drop the
duplication, as well as making the interface boundaries more clear
(which will let us refactor the implementation more in a future patch).
We'll leave describe_object() in builtin/fsck.c as a thin wrapper around
the new API, as it relies on a static global to make its many callers a
bit shorter.
We'll also convert the bare add_decoration() calls in builtin/fsck.c to
put_object_name(). This fixes two minor bugs:
1. We leak many small strings. add_decoration() has a last-one-wins
approach: it updates the decoration to the new string and returns
the old one. But we ignore the return value, leaking the old
string. This is quite common to trigger, since we look at reflogs:
the tip of any ref will be described both by looking at the actual
ref, as well as the latest reflog entry. So we'd always end up
leaking one of those strings.
2. The last-one-wins approach gives us lousy names. For instance, we
first look at all of the refs, and then all of the reflogs. So
rather than seeing "refs/heads/master", we're likely to overwrite
it with "HEAD@{12345678}". We're generally better off using the
first name we find.
And indeed, the test in t1450 expects this ugly HEAD@{} name. After
this patch, we've switched to using fsck_put_object_name()'s
first-one-wins semantics, and we output the more human-friendly
"refs/tags/julius" (and the test is updated accordingly).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we can't parse a commit, then parse_commit() will return an error
code. But it _also_ sets the "parsed" flag, which tells us not to bother
trying to re-parse the object. That means that subsequent parses have no
idea that the information in the struct may be bogus. I.e., doing this:
parse_commit(commit);
...
if (parse_commit(commit) < 0)
die("commit is broken");
will never trigger the die(). The second parse_commit() will see the
"parsed" flag and quietly return success.
There are two obvious ways to fix this:
1. Stop setting "parsed" until we've successfully parsed.
2. Keep a second "corrupt" flag to indicate that we saw an error (and
when the parsed flag is set, return 0/-1 depending on the corrupt
flag).
This patch does option 1. The obvious downside versus option 2 is that
we might continually re-parse a broken object. But in practice,
corruption like this is rare, and we typically die() or return an error
in the caller. So it's OK not to worry about optimizing for corruption.
And it's much simpler: we don't need to use an extra bit in the object
struct, and callers which check the "parsed" flag don't need to learn
about the corrupt bit, too.
There's no new test here, because this case is already covered in t5318.
Note that we do need to update the expected message there, because we
now detect the problem in the return from "parse_commit()", and not with
a separate check for a NULL tree. In fact, we can now ditch that
explicit tree check entirely, as we're covered robustly by this change
(and the previous recent change to treat a NULL tree as a parse error).
We'll also give tags the same treatment. I don't know offhand of any
cases where the problem can be triggered (it implies somebody ignoring a
parse error earlier in the process), but consistently returning an error
should cause the least surprise.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Adjust the test so that it computes variables for object IDs instead of
using hard-coded hashes.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Replace a hard-coded all-zeros object ID with a use of $ZERO_OID.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This test produces pseudo-collisions and tests git diff's behavior with
them, and is therefore sensitive to the hash in use. Update the test to
compute the collisions for both SHA-1 and SHA-256 using appropriate
constants. Move the heredocs inside the setup block so that all of the
setup code can be tested for failure.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Adjust the test so that it computes variables for object IDs instead of
using hard-coded hashes.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Compute several object IDs that exist in expected output, since we don't
care about the specific object IDs, only that the format of the output
is syntactically correct.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Adjust the test so that it computes variables for object IDs instead of
using hard-coded hashes. Move some expected result heredocs around so
that they can use computed variables.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of hard-coding the length of an object ID, look this value up
using the translation tables. Similarly, compute input data for invalid
submodule entries using the tables as well.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Adjust the test so that it computes variables for object IDs instead of
using hard-coded hashes.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Adjust the test so that it computes variables for object IDs instead of
using hard-coded hashes.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Adjust the test so that it computes variables for object IDs instead of
using hard-coded hashes.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This test passes successfully with SHA-256, so remove the annotation
which limits it to SHA-1.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A repository using a hash other than SHA-1 will need to have an
extension in the config file. Ignore any extensions when comparing
config files, since they don't usefully contribute to the goal of the
test.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add an option to print the object format used for input, output, or
storage. This allows shell scripts to discover the hash algorithm in
use.
Since the transition plan allows for multiple input algorithms, document
that we may provide multiple results for input, and the format that the
results may take. While we don't support this now, documenting it early
means that script authors can future-proof their scripts for when we do.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous commit includes a failing test for an issue around
fetch.writeCommitGraph and fetching in a repo with a submodule. Here, we
fix that bug and set the test to "test_expect_success".
The problem arises with this set of commands when the remote repo at
<url> has a submodule. Note that --recurse-submodules is not needed to
demonstrate the bug.
$ git clone <url> test
$ cd test
$ git -c fetch.writeCommitGraph=true fetch origin
Computing commit graph generation numbers: 100% (12/12), done.
BUG: commit-graph.c:886: missing parent <hash1> for commit <hash2>
Aborted (core dumped)
As an initial fix, I converted the code in builtin/fetch.c that calls
write_commit_graph_reachable() to instead launch a "git commit-graph
write --reachable --split" process. That code worked, but is not how we
want the feature to work long-term.
That test did demonstrate that the issue must be something to do with
internal state of the 'git fetch' process.
The write_commit_graph() method in commit-graph.c ensures the commits we
plan to write are "closed under reachability" using close_reachable().
This method walks from the input commits, and uses the UNINTERESTING
flag to mark which commits have already been visited. This allows the
walk to take O(N) time, where N is the number of commits, instead of
O(P) time, where P is the number of paths. (The number of paths can be
exponential in the number of commits.)
However, the UNINTERESTING flag is used in lots of places in the
codebase. This flag usually means some barrier to stop a commit walk,
such as in revision-walking to compare histories. It is not often
cleared after the walk completes because the starting points of those
walks do not have the UNINTERESTING flag, and clear_commit_marks() would
stop immediately.
This is happening during a 'git fetch' call with a remote. The fetch
negotiation is comparing the remote refs with the local refs and marking
some commits as UNINTERESTING.
I tested running clear_commit_marks_many() to clear the UNINTERESTING
flag inside close_reachable(), but the tips did not have the flag, so
that did nothing.
It turns out that the calculate_changed_submodule_paths() method is at
fault. Thanks, Peff, for pointing out this detail! More specifically,
for each submodule, the collect_changed_submodules() runs a revision
walk to essentially do file-history on the list of submodules. That
revision walk marks commits UNININTERESTING if they are simplified away
by not changing the submodule.
Instead, I finally arrived on the conclusion that I should use a flag
that is not used in any other part of the code. In commit-reach.c, a
number of flags were defined for commit walk algorithms. The REACHABLE
flag seemed like it made the most sense, and it seems it was not
actually used in the file. The REACHABLE flag was used in early versions
of commit-reach.c, but was removed by 4fbcca4 (commit-reach: make
can_all_from_reach... linear, 2018-07-20).
Add the REACHABLE flag to commit-graph.c and use it instead of
UNINTERESTING in close_reachable(). This fixes the bug in manual
testing.
Reported-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Helped-by: Jeff King <peff@peff.net>
Helped-by: Szeder Gábor <szeder.dev@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While dogfooding, Johannes found a bug in the fetch.writeCommitGraph
config behavior. His example initially happened during a clone with
--recurse-submodules, we found that this happens with the first fetch
after cloning a repository that contains a submodule:
$ git clone <url> test
$ cd test
$ git -c fetch.writeCommitGraph=true fetch origin
Computing commit graph generation numbers: 100% (12/12), done.
BUG: commit-graph.c:886: missing parent <hash1> for commit <hash2>
Aborted (core dumped)
In the repo I had cloned, there were really 60 commits to scan, but
only 12 were in the list to write when calling
compute_generation_numbers(). A commit in the list expects to see a
parent, but that parent is not in the list.
A follow-up will fix the bug, but first we create a test that
demonstrates the problem. This test must be careful about an existing
commit-graph file, since GIT_TEST_COMMIT_GRAPH=1 will cause the repo we
are cloning to already have one. This then prevents the incremtnal
commit-graph write during the first 'git fetch'.
Helped-by: Jeff King <peff@peff.net>
Helped-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Helped-by: Szeder Gábor <szeder.dev@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The codepath that reads the index.version configuration was broken
with a recent update, which has been corrected.
* ds/feature-macros:
repo-settings: read an int for index.version
Several config options were combined into a repo_settings struct in
ds/feature-macros, including a move of the "index.version" config
setting in 7211b9e (repo-settings: consolidate some config settings,
2019-08-13).
Unfortunately, that file looked like a lot of boilerplate and what is
clearly a factor of copy-paste overload, the config setting is parsed
with repo_config_ge_bool() instead of repo_config_get_int(). This means
that a setting "index.version=4" would not register correctly and would
revert to the default version of 3.
I caught this while incorporating v2.24.0-rc0 into the VFS for Git
codebase, where we really care that the index is in version 4.
This was not caught by the codebase because the version checks placed
in t1600-index.sh did not test the "basic" scenario enough. Here, we
modify the test to include these normal settings to not be overridden by
features.manyFiles or GIT_INDEX_VERSION. While the "default" version is
3, this is demoted to version 2 in do_write_index() when not necessary.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before, when doing a 3-way merge, the merge.conflictStyle option was not
respected and the "merge" style was always used, even if "diff3" was
specified.
Call git_xmerge_config() at the end of git_apply_config() so that the
merge.conflictStyle config is read.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, apply does not respect the merge.conflictStyle setting.
Demonstrate this by making the 'apply with --3way' test case generic and
extending it to show that the configuration of
merge.conflictStyle = diff3 causes a breakage.
Change print_sanitized_conflicted_diff() to also sanitize `|||||||`
conflict markers.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since `git config` leaves the configurations set even after the test
case completes, use `test_config` instead so that the configurations are
reset once the test case finishes.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before, the output of `git diff HEAD` would always be piped to
sanitize_conflicted_diff(). However, since the Git command was upstream
of the pipe, in case the Git command fails, the return code would be
lost. Rewrite into separate statements so that the return code is no
longer lost.
Since only the command `git diff HEAD` was being piped to
sanitize_conflicted_diff(), move the command into the function and rename
it to print_sanitized_conflicted_diff().
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since the locally defined create_file() duplicates the functionality of
the test_write_lines() helper function, remove create_file() and replace
all instances with test_write_lines(). While we're at it, move
redirection operators to the end of the command which is the more
conventional place to put it.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The atomic push over smart HTTP transport did not work, which has
been corrected.
* bc/smart-http-atomic-push:
remote-curl: pass on atomic capability to remote side
'logs/refs' is not a working tree-specific path, but since commit
b9317d55a3 (Make sure refs/rewritten/ is per-worktree, 2019-03-07)
'git rev-parse --git-path' has been returning a bogus path if a
trailing '/' is present:
$ git -C WT/ rev-parse --git-path logs/refs --git-path logs/refs/
/home/szeder/src/git/.git/logs/refs
/home/szeder/src/git/.git/worktrees/WT/logs/refs/
We use a trie data structure to efficiently decide whether a path
belongs to the common dir or is working tree-specific. As it happens
b9317d55a3 triggered a bug that is as old as the trie implementation
itself, added in 4e09cf2acf (path: optimize common dir checking,
2015-08-31).
- According to the comment describing trie_find(), it should only
call the given match function 'fn' for a "/-or-\0-terminated
prefix of the key for which the trie contains a value". This is
not true: there are three places where trie_find() calls the match
function, but one of them is missing the check for value's
existence.
- b9317d55a3 added two new keys to the trie: 'logs/refs/rewritten'
and 'logs/refs/worktree', next to the already existing
'logs/refs/bisect'. This resulted in a trie node with the path
'logs/refs/', which didn't exist before, and which doesn't have a
value attached. A query for 'logs/refs/' finds this node and then
hits that one callsite of the match function which doesn't check
for the value's existence, and thus invokes the match function
with NULL as value.
- When the match function check_common() is invoked with a NULL
value, it returns 0, which indicates that the queried path doesn't
belong to the common directory, ultimately resulting the bogus
path shown above.
Add the missing condition to trie_find() so it will never invoke the
match function with a non-existing value. check_common() will then no
longer have to check that it got a non-NULL value, so remove that
condition.
I believe that there are no other paths that could cause similar bogus
output. AFAICT the only other key resulting in the match function
being called with a NULL value is 'co' (because of the keys 'common'
and 'config'). However, as they are not in a directory that belongs
to the common directory the resulting working tree-specific path is
expected.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add the --[no-]progress option to git multi-pack-index.
Pass the MIDX_PROGRESS flag to the subcommand functions
when progress should be displayed by multi-pack-index.
The progress feature was added to 'verify' in 144d703
("multi-pack-index: report progress during 'verify'", 2018-09-13)
but some subcommands were not updated to display progress, and
the ability to opt-out was overlooked.
Signed-off-by: William Baker <William.Baker@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Transform the setup "tests" to setup functions, and have the actual
tests call the setup functions. Advantages:
* Should make life easier for people working with webby CI/PR builds
who have to abuse mice (and their own index finger as well) in
order to switch from viewing one testcase to another. Sounds
awful; hopefully this will improve things for them.
* Improves re-runnability: any failed test in any of these three
files can now be re-run in isolation, e.g.
./t6042* --ver --imm -x --run=21
whereas before it would require two tests to be specified to the
--run argument, the other needing to be picked out as the relevant
setup test from one or two tests before.
* Importantly, this still keeps the "setup" and "test" sections
somewhat separate to make it easier for readers to discern what is
just ancillary setup and what the intent of the test is.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We allow renaming all entries in e.g. a directory named z/ into a
directory named y/ to be detected as a z/ -> y/ rename, so that if the
other side of history adds any files to the directory z/ in the mean
time, we can provide the hint that they should be moved to y/.
There is no reason to not allow 'y/' to be the root directory, but the
code did not handle that case correctly. Add a testcase and the
necessary special checks to support this case.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
According to t/README, test_must_fail() should only be used to test for
failure in Git commands. Replace the invocations of
`test_must_fail grep` with `! grep`.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As noted by Gábor in [1], the new tests in edefc31873 ("format-patch:
create leading components of output directory", 2019-10-11) cannot be
run independently. Fix this.
[1] https://public-inbox.org/git/20191011144650.GM29845@szeder.dev/
Signed-off-by: Bert Wesarg <bert.wesarg@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While reviewing some dts diffs recently I noticed that the hunk header
logic was failing to find the containing node. This is because the regex
doesn't consider properties that may span multiple lines, i.e.
property = <something>,
<something_else>;
and it got hung up on comments inside nodes that look like the root node
because they start with '/*'. Add tests for these cases and update the
regex to find them. Maybe detecting the root node is too complicated but
forcing it to be a backslash with any amount of whitespace up to an open
bracket seemed OK. I tried to detect that a comment is in-between the
two parts but I wasn't happy so I just dropped it.
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Frank Rowand <frowand.list@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While parsing the parents of a commit, if we are able to parse an actual
oid but lookup_commit() fails on it (because we previously saw it in
this process as a different object type), we silently omit the parent
and do not report any error to the caller.
The caller has no way of knowing this happened, because even an empty
parent list is a valid parse result. As a result, it's possible to fool
our "rev-list" connectivity check into accepting a corrupted set of
objects.
There's a test for this case already in t6102, but unfortunately it has
a slight error. It creates a broken commit with a parent line pointing
to a blob, and then checks that rev-list notices the problem in two
cases:
1. the "lone" case: we traverse the broken commit by itself (here we
try to actually load the blob from disk and find out that it's not
a commit)
2. the "seen" case: we parse the blob earlier in the process, and then
when calling lookup_commit() we realize immediately that it's not a
commit
The "seen" variant for this test mistakenly parsed another commit
instead of the blob, meaning that we were actually just testing the
"lone" case again. Changing that reveals the breakage (and shows that
this fixes it).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 't0500-progress-display.sh' all tests running 'test-tool progress
--total=<N>' fail on big-endian systems, e.g. like this:
+ test-tool progress --total=3 Working hard
[...]
+ test_i18ncmp expect out
--- expect 2019-10-18 23:07:54.765523916 +0000
+++ out 2019-10-18 23:07:54.773523916 +0000
@@ -1,4 +1,2 @@
-Working hard: 33% (1/3)<CR>
-Working hard: 66% (2/3)<CR>
-Working hard: 100% (3/3)<CR>
-Working hard: 100% (3/3), done.
+Working hard: 0% (1/12884901888)<CR>
+Working hard: 0% (3/12884901888), done.
The reason for that bogus value is that '--total's parameter is parsed
via parse-options's OPT_INTEGER into a uint64_t variable [1], so the
two bits of 3 end up in the "wrong" bytes on big-endian systems
(12884901888 = 0x300000000).
Change the type of that variable from uint64_t to int, to match what
parse-options expects; in the tests of the progress output we won't
use values that don't fit into an int anyway.
[1] start_progress() expects the total number as an uint64_t, that's
why I chose the same type when declaring the variable holding the
value given on the command line.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
[jpag: Debian unstable/ppc64 (big-endian)]
Tested-By: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
[tz: Fedora s390x (big-endian)]
Tested-By: Todd Zullinger <tmz@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git stash save" lost local changes to submodules, which has been
corrected.
* jj/stash-reset-only-toplevel:
stash: avoid recursive hard reset on submodules
"git format-patch -o <outdir>" did an equivalent of "mkdir <outdir>"
not "mkdir -p <outdir>", which is being corrected.
* bw/format-patch-o-create-leading-dirs:
format-patch: create leading components of output directory
The builtin/notes.c::copy() function is prepared to handle either
one or two arguments given from the command line; when one argument
is given, to-obj defaults to HEAD.
bbb1b8a3 ("notes: check number of parameters to "git notes copy"",
2010-06-28) tried to make sure "git notes copy" (with *no* other
argument) does not dereference NULL by checking the number of
parameters, but it incorrectly insisted that we need two arguments,
instead of either one or two. This disabled the defaulting to-obj
to HEAD.
Correct it.
Signed-off-by: Doan Tran Cong Danh <congdanhqx@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
