* rs/strbuf-expand:
remove the unused files interpolate.c and interpolate.h
daemon: deglobalize variable 'directory'
daemon: inline fill_in_extra_table_entries()
daemon: use strbuf_expand() instead of interpolate()
merge-recursive: use strbuf_expand() instead of interpolate()
add strbuf_expand_dict_cb(), a helper for simple cases
* mv/clone-strbuf:
builtin_clone: use strbuf in cmd_clone()
builtin-clone: use strbuf in clone_local() and copy_or_link_directory()
builtin-clone: use strbuf in guess_dir_name()
* ph/send-email:
git send-email: ask less questions when --compose is used.
git send-email: add --annotate option
git send-email: interpret unknown files as revision lists
git send-email: make the message file name more specific.
* maint:
sha1_file.c: resolve confusion EACCES vs EPERM
sha1_file: avoid bogus "file exists" error message
git checkout: don't warn about unborn branch if -f is already passed
bash: offer refs instead of filenames for 'git revert'
bash: remove dashed command leftovers
git-p4: fix keyword-expansion regex
fast-export: use an unsorted string list for extra_refs
Add new testcase to show fast-export does not always exports all tags
An earlier commit 916d081 (Nicer error messages in case saving an object
to db goes wrong, 2006-11-09) confused EACCES with EPERM, the latter of
which is an unlikely error from mkstemp().
Signed-off-by: Sam Vilain <sam@vilain.net>
This avoids the following misleading error message:
error: unable to create temporary sha1 filename ./objects/15: File exists
mkstemp can fail for many reasons, one of which, ENOENT, can occur if
the directory for the temp file doesn't exist. create_tmpfile tried to
handle this case by always trying to mkdir the directory, even if it
already existed. This caused errno to be clobbered, so one cannot tell
why mkstemp really failed, and it truncated the buffer to just the
directory name, resulting in the strange error message shown above.
Note that in both occasions that I've seen this failure, it has not been
due to a missing directory, or bad permissions, but some other, unknown
mkstemp failure mode that did not occur when I ran git again. This code
could perhaps be made more robust by retrying mkstemp, in case it was a
transient failure.
Signed-off-by: Joey Hess <joey@kitenet.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
I think it's unnecessary to warn that the checkout has been forced due to an
unborn current branch if -f has been explicitly passed. For one project, I am
using git-new-workdir to create workdirs from a bare repository whose HEAD is
set to an unborn branch, and this warning started to irritate me.
Signed-off-by: Matt McCutchen <matt@mattmccutchen.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The completion script for 'git revert' currently offers options and
filenames. However, 'git revert' doesn't take any filenames from the
command line, but a single commit. Therefore, it's more sane to offer
refs instead.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Sometimes it's handy to complete full refs, e.g. the user has some
refs outside of refs/{heads,remotes,tags} or the user wants to
complete some git command's special refs (like 'git show
refs/bisect/bad').
To do that, we check whether the ref to be completed starts with
'refs/' or is 'refs' (to reduce the risk of matching 'refs-'). If it
does, then we offer full refs for completion; otherwise everything
works as usual.
This way the impact on the common case is fairly small (hopefully not
many users have branches or tags starting with 'refs'), and in the
special case the cost of typing out 'refs' is bearable.
While at it, also remove the unused 'cmd' variable from '__git_refs'.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 5a625b07 (bash: remove fetch, push, pull dashed form leftovers,
2008-10-03) did that already, but there were still some git-cmd left
here and there.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This text:
my $dir = $File::Find::dir;
return if ($dir !~ m,$options->{dirpat}$,);
was improperly converted to:
my $dir = $File$dir !~ m,$options->{dirpat}$,);
by the keyword identifier expansion code. Add a \n
to make sure the regex doesn't go across end-of-line
boundaries.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Acked-by: Simon Hausmann <simon@lst.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
I figured the sections might as well be in some order, so I chose alphabetical
but with "core" at the beginning. This should help people add new variables
in the right places.
Signed-off-by: Matt McCutchen <matt@mattmccutchen.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The sed call used in compare_svn_head_with() uses the + quantifier, which
is not supported in the OSX version of sed. It is replaced by the
equivalent \{1,\}.
Signed-off-by: Marcel Koeppen <git-dev@marzelpan.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The original intention of 72909be (Add diff-option --ext-diff, 2007-06-30)
was to optionally allow the use of external diff viewer in "git log"
family (while keeping them disabled by default). It exposed the "allow
external diff" bit to the UI, but forgot to adjust the "git diff" codepath
that was set up to always allow use of the external diff viewer.
Noticed by Nazri Ramliy; tests by René Scharfe squashed in.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
See: http://www.washington.edu/pine/tech-notes/low-level.html
Entries with a fcc or comment field after the address weren't parsed
correctly.
Continuation lines, identified by leading spaces, were also not handled.
Distribution lists which had ( ) around a list of addresses did not have
the parenthesis removed.
Signed-off-by: Trent Piepho <tpiepho@freescale.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* 'for-junio' of git://source.winehq.org/~julliard/git/git:
git.el: Allow to commit even if there are no marked files.
git.el: Add possibility to mark files directly in git-update-status-files.
git.el: Add an insert file command.
git.el: Never clear the status buffer, only update the files.
git.el: Fix git-amend-commit to support amending an initial commit.
git.el: Properly handle merge commits in git-amend-commit.
git.el: Simplify handling of merge heads in the commit log-edit buffer.
git.el: Remove the env parameter in git-call-process and git-call-process-string.
git.el: Improve error handling for commits.
Remove the global variable 'directory' and pass it as a parameter of
the two functions that use it instead, (almost) restoring their
interface to how it was before 49ba83fb67.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Having fill_in_extra_table_entries() as a separate function has no
advantage -- a function with no parameters and return values might as
well be an anonymous block of code. Its name still refers to the table
of interpolate() which has been removed earlier, so it's better to
inline it at its only call site.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new callback function strbuf_expand_dict_cb() can be used together
with strbuf_expand() if there is only a small number of placeholders
for static replacement texts. It expects its dictionary as an array of
placeholder+value pairs as context parameter, terminated by an entry
with the placeholder member set to NULL.
The new helper is intended to aid converting the remaining calls of
interpolate(). strbuf_expand() is smaller, more flexible and can be
used to go faster than interpolate(), so it should replace the latter.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The list extra_refs contains tags and the objects referenced by them,
so that they can be handled at the end. When a tag references a
commit, that commit is added to the list using the same name.
Also, the function handle_tags_and_duplicates() relies on the order
the items were added to extra_refs, so clearly we do not want to
use a sorted list here.
Noticed by Miklos Vajna.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Tested-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This avoids the following misleading error message:
error: unable to create temporary sha1 filename ./objects/15: File exists
mkstemp can fail for many reasons, one of which, ENOENT, can occur if
the directory for the temp file doesn't exist. create_tmpfile tried to
handle this case by always trying to mkdir the directory, even if it
already existed. This caused errno to be clobbered, so one cannot tell
why mkstemp really failed, and it truncated the buffer to just the
directory name, resulting in the strange error message shown above.
Note that in both occasions that I've seen this failure, it has not been
due to a missing directory, or bad permissions, but some other, unknown
mkstemp failure mode that did not occur when I ran git again. This code
could perhaps be made more robust by retrying mkstemp, in case it was a
transient failure.
Signed-off-by: Joey Hess <joey@kitenet.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Documentation for -n implies that -x is normally
used, however this is no longer true.
Signed-off-by: Bryan Drewery <bryan@shatow.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Avoid passing cygwin pathnames to Perl. Some Perls have problems using them
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the case of bad packed object CRC, unuse_pack wasn't called after
check_pack_crc which calls use_pack.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Acked-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On POSIX, rename() can replace files that are not writable. On Windows,
however, read-only files cannot be replaced without additional efforts:
We have to make the destination writable first.
Since the situations where the destination is read-only are rare, we do not
make the destination writable on every invocation, but only if the first
try to rename a file failed with an "access denied" error.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Without this change, "git tags" will not suggest "git tag"
(it will only suggest "git status"), and "git statusx" will
not suggest anything.
Signed-off-by: Samuel Tardieu <sam@rfc1149.net>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
