The "a..b" revision syntax was designed to handle commits,
so it doesn't bother to record any mode we find while
traversing a "tree:path" endpoint. These days "git diff" can
diff blobs using either "a:path..b:path" (with dots) or
"a:path b:path" (without), but the two behave
inconsistently, as the with-dots version fails to notice the
mode.
Let's teach the dot-dot range parser to record modes; it
doesn't cost us anything, and it makes this case work.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The git-diff command can directly compare two blobs (or a
blob and a file), but we don't test this at all. Let's add
some basic tests that reveal a few problems.
There are basically four interesting inputs:
1. sha1 against sha1 (where diff has no information beyond
the contents)
2. tree:path against tree:path (where it can get
information via get_sha1_with_context)
3. Same as (2), but using the ".." range syntax
4. tree:path against a filename
And beyond generating a sane diff, we care about a few
little bits: which paths they show in the diff header, and
whether they correctly pick up a mode change.
They should all be able to show a mode except for (1),
though note that case (3) is currently broken.
For the headers, we would ideally show the path within the
tree if we have it, making:
git diff a:path b:path
look the same as:
git diff a b -- path
We can't always do that (e.g., in the direct sha1/sha1 diff,
we have no path to show), in which case we should fall back
to the name that resolved to the blob (which is nonsense
from the repository's perspective, but is the best we can
do).
Aside from the fallback case in (1), none of the cases get
this right. Cases (2) and (3) always show the full
tree:path, even though we should be able to know just the
"path" portion.
Case (4) picks up the filename path, but assigns it to
_both_ sides of the diff. So this works for:
git diff tree:path path
but not for:
git diff tree:other_path path
The appropriate tests are marked to expect failure.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we are parsing a range like "a..b", we write a
temporary NUL over the first ".", so that we can access the
names "a" and "b" as C strings. But our restoration of the
original "." is done at inconsistent times, which can lead
to confusing results.
For most calls, we restore the "." after we resolve the
names, but before we call verify_non_filename(). This means
that when we later call add_pending_object(), the name for
the left-hand "a" has been re-expanded to "a..b". You can
see this with:
git log --source a...b
where "b" will be correctly marked with "b", but "a" will be
marked with "a...b". Likewise with "a..b" (though you need
to use --boundary to even see "a" at all in that case).
To top off the confusion, when the REVARG_CANNOT_BE_FILENAME
flag is set, we skip the non-filename check, and leave the
NUL in place.
That means we do report the correct name for "a" in the
pending array. But some code paths try to show the whole
"a...b" name in error messages, and these erroneously show
only "a" instead of "a...b". E.g.:
$ git cherry-pick HEAD:foo...HEAD:foo
error: object d95f3ad14dee633a758d2e331151e950dd13e4ed is a blob, not a commit
error: object d95f3ad14dee633a758d2e331151e950dd13e4ed is a blob, not a commit
fatal: Invalid symmetric difference expression HEAD:foo
(That last message should be "HEAD:foo...HEAD:foo"; I used
cherry-pick because it passes the CANNOT_BE_FILENAME flag).
As an interesting side note, cherry-pick actually looks at
and re-resolves the arguments from the pending->name fields.
So it would have been visibly broken by the first bug, but
the effect was canceled out by the second one.
This patch makes the whole function consistent by re-writing
the NUL immediately after calling verify_non_filename(), and
then restoring the "." as appropriate in some error-printing
and early-return code paths.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is an implicit assumption that a directory containing only
untracked and ignored paths should itself be considered untracked. This
makes sense in use cases where we're asking if a directory should be
added to the git database, but not when we're asking if a directory can
be safely removed from the working tree; as a result, clean -d would
assume that an "untracked" directory containing ignored paths could be
deleted, even though doing so would also remove the ignored paths.
To get around this, we teach clean -d to collect ignored paths and skip
an untracked directory if it contained an ignored path, instead just
removing the untracked contents thereof. To achieve this, cmd_clean()
has to collect all untracked contents of untracked directories, in
addition to all ignored paths, to determine which untracked dirs must be
skipped (because they contain ignored paths) and which ones should *not*
be skipped.
For this purpose, correct_untracked_entries() is introduced to prune a
given dir_struct of untracked entries containing ignored paths and those
untracked entries encompassed by the untracked entries which are not
pruned away.
A memory leak is also fixed in cmd_clean().
This also fixes the known breakage in t7300, since clean -d now skips
untracked directories containing ignored paths.
Signed-off-by: Samuel Lijin <sxlijin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Just because the files backend can't retain reflogs for deleted
references is no reason that they shouldn't be supported by the
virtual method interface. Also, `delete_ref()` and `refs_delete_ref()`
have already gained `msg` parameters. Now let's add them to
`delete_refs()` and `refs_delete_refs()`.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test of failing `git rm -f` removes the write permissions on the
test directory, but fails to restore them if the test fails. This
means that the test temporary directory cannot be cleaned up, which
means that subsequent attempts to run the test fail mysteriously.
Instead, do the cleanup in a `test_when_finished` block so that it
can't be skipped.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* bc/object-id: (53 commits)
object: convert parse_object* to take struct object_id
tree: convert parse_tree_indirect to struct object_id
sequencer: convert do_recursive_merge to struct object_id
diff-lib: convert do_diff_cache to struct object_id
builtin/ls-tree: convert to struct object_id
merge: convert checkout_fast_forward to struct object_id
sequencer: convert fast_forward_to to struct object_id
builtin/ls-files: convert overlay_tree_on_cache to object_id
builtin/read-tree: convert to struct object_id
sha1_name: convert internals of peel_onion to object_id
upload-pack: convert remaining parse_object callers to object_id
revision: convert remaining parse_object callers to object_id
revision: rename add_pending_sha1 to add_pending_oid
http-push: convert process_ls_object and descendants to object_id
refs/files-backend: convert many internals to struct object_id
refs: convert struct ref_update to use struct object_id
ref-filter: convert some static functions to struct object_id
Convert struct ref_array_item to struct object_id
Convert the verify_pack callback to struct object_id
Convert lookup_tag to struct object_id
...
The description of the test was not enclosed in single quotes, which
broke the coloring scheme that I am used to. Upon closer inspection
the test is good, but the description is a bit vague. So extend the
description of the first test.
While at it align the description of the file to match what we actually
test in the file.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update tests to pass under GETTEXT_POISON (a mechanism to ensure
that output strings that should not be translated are not
translated by mistake), and tell TravisCI to run them.
* ab/fix-poison-tests:
travis-ci: add job to run tests with GETTEXT_POISON
travis-ci: setup "prove cache" in "script" step
tests: fix tests broken under GETTEXT_POISON=YesPlease
The receive-pack program now makes sure that the push certificate
records the same set of push options used for pushing.
* jt/push-options-doc:
receive-pack: verify push options in cert
docs: correct receive.advertisePushOptions default
The Web interface to gmane news archive is long gone, even though
the articles are still accessible via NTTP. Replace the links with
ones to public-inbox.org. Because their message identification is
based on the actual message-id, it is likely that it will be easier
to migrate away from it if/when necessary.
* ab/doc-replace-gmane-links:
doc: replace more gmane links
doc: replace a couple of broken gmane links
Setting "log.decorate=false" in the configuration file did not take
effect in v2.13, which has been corrected.
* ah/log-decorate-default-to-auto:
builtin/log: honor log.decorate
When we taught read_directory_recursive() to recurse into untracked
directories in search of ignored files given DIR_SHOW_IGNORED_TOO, that
had the side effect of teaching it to collect the untracked contents of
untracked directories. It doesn't always make sense to return these,
though (we do need them for `clean -d`), so we introduce a flag
(DIR_KEEP_UNTRACKED_CONTENTS) to control whether or not read_directory()
strips dir->entries of the untracked contents of untracked dirs.
We also introduce check_contains() to check if one dir_entry corresponds
to a path which contains the path corresponding to another dir_entry.
This also fixes known breakages in t7061, since status --ignored now
searches untracked directories for ignored files.
Signed-off-by: Samuel Lijin <sxlijin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Per eb8c5b87, `status --ignored` by design does not list ignored files
if they are in a directory which contains only ignored and untracked
files (which is itself considered to be untracked) without `-uall`. This
does not make sense for `--ignored`, which claims to "Show ignored files
as well."
Thus we revisit eb8c5b87 and decide that for such directories, `status
--ignored` will list the directory as untracked *and* list all ignored
files within said directory even without `-uall`.
Signed-off-by: Samuel Lijin <sxlijin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If git sees a directory which contains only untracked and ignored
files, clean -d should not remove that directory. It was recently
discovered that this is *not* true of git clean -d, and it's possible
that this has never worked correctly; this test and its accompanying
patch series aims to fix that.
Signed-off-by: Samuel Lijin <sxlijin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Amend the t/perf/run output so that in addition to the "Running N
tests" heading currently being emitted, it also emits "Unpacking $rev"
and "Building $rev" when setting up the build/$rev directory & when
building it, respectively.
This makes it easier to see what's going on and what revision is being
tested as the output scrolls by.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a git GIT_PERF_MAKE_COMMAND variable to compliment the existing
GIT_PERF_MAKE_OPTS facility. This allows specifying an arbitrary shell
command to execute instead of 'make'.
This is useful e.g. in cases where the name, semantics or defaults of
a Makefile flag have changed over time. It can even be used to change
the contents of the tree, useful for monkeypatching ancient versions
of git to get them to build.
This opens Pandora's box in some ways, it's now possible to
"jailbreak" the perf environment and e.g. modify the source tree via
this arbitrary instead of just issuing a custom "make" command, such a
command has to be re-entrant in the sense that subsequent perf runs
will re-use the possibly modified tree.
It would be pointless to try to mitigate or work around that caveat in
a tool purely aimed at Git developers, so this change makes no attempt
to do so.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Address a big blind spot in the tests for patterns containing \0. The
is_fixed() function considers any string that contains \0 fixed, even
if it contains regular expression metacharacters, those patterns are
currently matched with kwset.
Before this change removing that memchr(s, 0, len) check from
is_fixed() wouldn't change the result of any of the tests, since
regcomp() will happily match the part before the \0.
The kwset path is dependent on whether the the -i flag is on, and
whether the pattern has any non-ASCII characters, but none of this was
tested for.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add setup code needed for testing regexes that contain both binary
data and regex metacharacters.
The POSIX regcomp() function inherently can't support that, because it
takes a \0-delimited char *, but other regex engines APIs like PCRE v2
take a pattern/length pair, and are thus able to handle \0s in
patterns as well as any other character.
When kwset was imported in commit 9eceddeec6 ("Use kwset in grep",
2011-08-21) this limitation was fixed, but at the expense of
introducing the undocumented limitation that any pattern containing \0
implicitly becomes a fixed match (equivalent to -F having been
provided).
That's not something we'd like to keep in the future. The inability to
match patterns containing \0 is a leaky implementation detail.
So add tests as a first step towards changing that. In order to test
that \0-patterns can properly match as regexes the test string needs
to have some regex metacharacters in it.
There were other blind spots in the tests. The code around kwset
specially handles case-insensitive & non-ASCII data, but there were no
tests for this.
Fix all of that by amending the text being matched to contain both
regex metacharacters & non-ASCII data.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a helper function to make the tests which check for patterns with
\0 in them more succinct. Right now this isn't a big win, but
subsequent commits will add a lot more of these tests.
The helper is based on the match() function in t3070-wildmatch.sh.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add testing for grep pattern types being correctly passed to
submodules. The pattern "(.|.)[\d]" matches differently under
fixed (not at all), and then matches different lines under
basic/extended & perl regular expressions, so this change asserts that
the pattern type is passed along correctly.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Amend the submodule recursion test to prepare it for subsequent tests
of whether it passes along the grep.patternType to the submodule
greps.
This is the result of searching & replacing:
foobar -> (1|2)d(3|4)
foo -> (1|2)
bar -> (3|4)
Currently there's no tests for whether e.g. -P or -E is correctly
passed along, tests for that will be added in a follow-up change, but
first add content to the tests which will match differently under
different regex engines.
Reuse the pattern established in an earlier commit of mine in this
series ("log: add exhaustive tests for pattern style options &
config", 2017-04-07). The pattern "(.|.)[\d]" will match this content
differently under fixed/basic/extended & perl.
This test code was originally added in commit 0281e487fd ("grep:
optionally recurse into submodules", 2016-12-16).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add tests for --threads=N being supplied on the command-line, or when
grep.threads=N being supplied in the configuration.
When the threading support was made run-time configurable in commit
89f09dd34e ("grep: add --threads=<num> option and grep.threads
configuration", 2015-12-15) no tests were added for it.
In developing a change to the grep code I was able to make
'--threads=1 <pat>` segfault, while the test suite still passed. This
change fixes that blind spot in the tests.
In addition to asserting that asking for N threads shouldn't segfault,
test that the grep output given any N is the same.
The choice to test only 1..10 as opposed to 1..8 or 1..16 or whatever
is arbitrary. Testing 1..1024 works locally for me (but gets
noticeably slower as more threads are spawned). Given the structure of
the code there's no reason to test an arbitrary number of threads,
only 0, 1 and >=2 are special modes of operation.
A later patch introduces a PTHREADS test prerequisite which is true
under NO_PTHREADS=UnfortunatelyYes, but even under NO_PTHREADS it's
fine to test --threads=N, we'll just ignore it and not use
threading. So these tests also make sense under that mode to assert
that --threads=N without pthreads still returns expected results.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change a non-ASCII case-insensitive test case to stop using --debug,
and instead simply test for the expected results.
The test coverage remains the same with this change, but the test
won't break due to internal refactoring.
This test was added in commit 793dc676e0 ("grep/icase: avoid kwsset
when -F is specified", 2016-06-25). It was asserting that the regex
must be compiled with compile_fixed_regexp(), instead test for the
expected results, allowing the underlying implementation to change.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a test for backreferences such as (.)\1 in PCRE patterns. This
test ensures that the PCRE_NO_AUTO_CAPTURE option isn't turned
on. Before this change turning it on would break these sort of
patterns, but wouldn't break any tests.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a test asserting that when --perl-regexp (and -P for grep) is
given to git-grep & git-log that we die with an error.
In developing the PCRE v2 series I introduced a regression where -P
would (through control-flow fall-through) become synonymous with basic
POSIX matching. I.e. 'git grep -P '[\d]' would match "d" instead of
digits.
The entire test suite would still pass with this serious regression,
since everything that tested for --perl-regexp would be guarded by the
PCRE prerequisite, fix that blind-spot by adding tests under !PCRE
asserting that git must die when given --perl-regexp or -P.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make the --regexp-ignore-case option work with --perl-regexp. This
never worked, and there was no test for this. Fix the bug and add a
test.
When PCRE support was added in commit 63e7e9d8b6 ("git-grep: Learn
PCRE", 2011-05-09) compile_pcre_regexp() would only check
opt->ignore_case, but when the --perl-regexp option was added in
commit 727b6fc3ed ("log --grep: accept --basic-regexp and
--perl-regexp", 2012-10-03) the code didn't set the opt->ignore_case.
Change the test suite to test for -i and --invert-regexp with
basic/extended/perl patterns in addition to fixed, which was the only
patternType that was tested for before in combination with those
options.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add exhaustive tests for how the different grep.patternType options &
the corresponding command-line options affect git-log.
Before this change it was possible to patch revision.c so that the
--basic-regexp option was synonymous with --extended-regexp, and
--perl-regexp wasn't recognized at all, and still have 100% of the
test suite pass.
This was because the first test being modified here, added in commit
34a4ae55b2 ("log --grep: use the same helper to set -E/-F options as
"git grep"", 2012-10-03), didn't actually check whether we'd enabled
extended regular expressions as distinct from re-toggling non-fixed
string support.
Fix that by changing the pattern to a pattern that'll only match if
--extended-regexp option is provided, but won't match under the
default --basic-regexp option.
Other potential regressions were possible since there were no tests
for the rest of the combinations of grep.patternType configuration
toggles & corresponding git-log command-line options. Add exhaustive
tests for those.
The patterns being passed to fixed/basic/extended/PCRE are carefully
crafted to return the wrong thing if the grep engine were to pick any
other matching method than the one it's told to use.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename the LIBPCRE prerequisite to PCRE. This is for preparation for
libpcre2 support, where having just "LIBPCRE" would be confusing as it
implies v1 of the library.
None of these tests are incompatible between versions 1 & 2 of
libpcre, it's less confusing to give them a more general name to make
it clear that they work on both library versions.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When peeling a tag for prepare_revision_walk(), we do not
respect the ignore_missing_links flag. This can lead to a
bogus error when pack-objects walks the possibly-broken
unreachable-but-recent part of the object graph.
The other link-following all happens via traverse_commit_list(),
which explains why this case was missed. And our tests
covered only broken links from commits. Let's be more
comprehensive and cover broken tree entries (which do work)
and tags (which shows off this bug).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make git checkout (and other unpack_tree operations) preserve the
untracked cache. This is valuable for two reasons:
1. Often, an unpack_tree operation will not touch large parts of the
working tree, and thus most of the untracked cache will continue to be
valid.
2. Even if the untracked cache were entirely invalidated by such an
operation, the user has signaled their intention to have such a cache,
and we don't want to throw it away.
[jes: backed out the watchman-specific parts]
Signed-off-by: David Turner <dturner@twopensource.com>
Signed-off-by: Ben Peart <benpeart@microsoft.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a commit message is edited with the "verbose" option, the buffer
will have a cut line and diff after the log message, like so:
my subject
# ------------------------ >8 ------------------------
# Do not touch the line above.
# Everything below will be removed.
diff --git a/foo.txt b/foo.txt
index 5716ca5..7601807 100644
--- a/foo.txt
+++ b/foo.txt
@@ -1 +1 @@
-bar
+baz
"git interpret-trailers" is unaware of the cut line, and assumes the
trailer block would be at the end of the whole thing. This can easily
be seen with:
$ GIT_EDITOR='git interpret-trailers --in-place --trailer Acked-by:me' \
git commit --amend -v
Teach "git interpret-trailers" to notice the cut-line and ignore the
remainder of the input when looking for a place to add new trailer
block. This makes it consistent with how "git commit -v -s" inserts a
new Signed-off-by: line.
This can be done by the same logic as the existing helper function,
wt_status_truncate_message_at_cut_line(), uses, but it wants the caller
to pass a strbuf to it. Because the function ignore_non_trailer() used
by the command takes a <pointer, length> pair, not a strbuf, steal the
logic from wt_status_truncate_message_at_cut_line() to create a new
wt_status_locate_end() helper function that takes <pointer, length>
pair, and make ignore_non_trailer() call it to help "interpret-trailers".
Since there is only one caller of wt_status_truncate_message_at_cut_line()
in cmd_commit(), rewrite it to call wt_status_locate_end() helper instead
and remove the old helper that no longer has any caller.
Signed-off-by: Brian Malehorn <bmalehorn@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
One test in t5400 examines the packet exchange between git-push and
git-receive-pack. The latter inherits the GIT_TRACE_PACKET environment
variable, so that both processes dump trace data into the same file
concurrently. This should not be a problem because the trace file is
opened with O_APPEND.
On Windows, however, O_APPEND is not atomic as it should be: it is
emulated as lseek(SEEK_END) followed by write(). For this reason, the
test is unreliable: it can happen that one process overwrites a line
that was just written by the other process. As a consequence, the test
sometimes does not find one or another line that is expected (and it is
also successful occasionally).
The test case is actually only interested in the output of git-push.
To ensure that only git-push writes to the trace file, override the
receive-pack command such that it does not even open the trace file.
Reported-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In commit 438fc68462 ("push options: pass push options to the transport
helper", 08-02-2017), the test coverage was reduced to run no tests at all
if you lack a http server. Move the http initialization to the end,
such that only http tests are skipped when a http server is missing.
The test in between that tests submodule propagation is safe to run before
the http tests as it makes its own test directories `parent` and
`parent_upstream`.
Noticed-by: Ramsay Jones <ramsay@ramsayjones.plus.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Because TAP output does not like to see the remainder of the test
getting skipped after running one or more tests, bf4b7219
("test-lib.sh: Add check for invalid use of 'skip_all' facility",
2012-09-01) made sure that test_done errors out when this happens.
Instead, loosen the check so that we only pretend that the rest of
the test script did not exist in such a case. We'd lose a bit of
information (i.e. TAP does not notice that we are skipping some
tests), but not very much (i.e. TAP wasn't told how many tests are
skipped anyway).
This will allow inclusion of lib-httpd.sh in the middle of a test,
which will skip the remainder of the test scripts when tests that
involve web server are declined with GIT_TEST_HTTPD=false, for
example.
Acked-by: Ramsay Jones <ramsay@ramsayjones.plus.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the conditional inclusion mechanism to support
e.g. gitdir:~/git_tree/repo where ~/git_tree is a symlink to
/mnt/stuff/repo.
This worked in the initial version of this facility[1], but regressed
later in the series while solving a related bug[2].
Now gitdir: will match against the symlinked
path (e.g. gitdir:~/git_tree/repo) in addition to the current
/mnt/stuff/repo path.
Since this is already in a release version note in the documentation
that this behavior changed, so users who expect their configuration to
work on both v2.13.0 and some future version of git with this fix
aren't utterly confused.
1. commit 3efd0bedc6 ("config: add conditional include", 2017-03-01)
2. commit 86f9515708 ("config: resolve symlinks in conditional
include's patterns", 2017-04-05)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some platforms have ulong that is smaller than time_t, and our
historical use of ulong for timestamp would mean they cannot
represent some timestamp that the platform allows. Invent a
separate and dedicated timestamp_t (so that we can distingiuish
timestamps and a vanilla ulongs, which along is already a good
move), and then declare uintmax_t is the type to be used as the
timestamp_t.
* js/larger-timestamps:
archive-tar: fix a sparse 'constant too large' warning
use uintmax_t for timestamps
date.c: abort if the system time cannot handle one of our timestamps
timestamp_t: a new data type for timestamps
PRItime: introduce a new "printf format" for timestamps
parse_timestamp(): specify explicitly where we parse timestamps
t0006 & t5000: skip "far in the future" test when time_t is too limited
t0006 & t5000: prepare for 64-bit timestamps
ref-filter: avoid using `unsigned long` for catch-all data type
"git clone --config var=val" is a way to populate the
per-repository configuration file of the new repository, but it did
not work well when val is an empty string. This has been fixed.
* jn/clone-add-empty-config-from-command-line:
clone: handle empty config values in -c
"git archive --format=zip" learned to use zip64 extension when
necessary to go beyond the 4GB limit.
* rs/large-zip:
t5004: require 64-bit support for big ZIP tests
archive-zip: set version field for big files correctly
archive-zip: support files bigger than 4GB
archive-zip: support archives bigger than 4GB
archive-zip: write ZIP dir entry directly to strbuf
archive-zip: use strbuf for ZIP directory
archive-zip: add tests for big ZIP archives
"git clone" learned the "--no-tags" option not to fetch all tags
initially, and also set up the tagopt not to follow any tags in
subsequent fetches.
* ab/clone-no-tags:
tests: rename a test having to do with shallow submodules
clone: add a --no-tags option to clone without tags
tests: change "cd ... && git fetch" to "cd &&\n\tgit fetch"
The colors in which "git status --short --branch" showed the names
of the current branch and its remote-tracking branch are now
configurable.
* sk/status-short-branch-color-config:
status: add color config slots for branch info in "--short --branch"
status: fix missing newline when comment chars are disabled
"git cherry-pick" and other uses of the sequencer machinery
mishandled a trailer block whose last line is an incomplete line.
This has been fixed so that an additional sign-off etc. are added
after completing the existing incomplete line.
* jt/use-trailer-api-in-commands:
sequencer: add newline before adding footers
"git gc" did not interact well with "git worktree"-managed
per-worktree refs.
* nd/worktree-kill-parse-ref:
refs: kill set_worktree_head_symref()
worktree.c: kill parse_ref() in favor of refs_resolve_ref_unsafe()
refs: introduce get_worktree_ref_store()
refs: add REFS_STORE_ALL_CAPS
refs.c: make submodule ref store hashmap generic
environment.c: fix potential segfault by get_git_common_dir()
Attempt to allow us notice "fishy" situation where we fail to
remove the temporary directory used during the test.
* dt/gc-ignore-old-gc-logs:
test-lib: retire $remove_trash variable
test-lib.sh: do not barf under --debug at the end of the test
test-lib: abort when can't remove trash directory
Code to update the cache-tree has been tightened so that we won't
accidentally write out any 0{40} entry in the tree object.
* jk/no-null-sha1-in-cache-tree:
cache-tree: reject entries with null sha1
Currently, send-email has support for rudimentary e-mail validation.
Allow the user to add support for more validation by providing a
sendemail-validate hook.
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Repositories with less than 4000 entries are always handled using a
single thread, causing test-lazy-init-name-hash --multi to error out.
Don't abort the whole test script in that case, but simply skip the
multi-threaded performance check. We can still use it to compare the
single-threaded speed of different versions in that case.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Acked-by: Jeff Hostetler <git@jeffhostetler.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the single-threaded variant beats the multi-threaded one then we may
have a performance bug, but that doesn't justify aborting the test.
Drop that check; we can compare the results for --single and --multi
using the actual performance tests.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Acked-by: Jeff Hostetler <git@jeffhostetler.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The perf test suite (more specifically: t/perf/aggregate.perl) requires
each test script to write test results into a file, otherwise it aborts
when aggregating. Add actual performance tests with test_perf to allow
p0004 to be run together with other perf scripts.
Calibrate the value for the parameter --count based on the size of the
test repository, in order to get meaningful results with smaller repos
yet still be able to finish the script against huge ones without having
to wait for hours.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Acked-by: Jeff Hostetler <git@jeffhostetler.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The return code of commands on the producing end of a pipe is ignored.
Evaluate the outcome of test-lazy-init-name-hash by calling sort
separately.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Acked-by: Jeff Hostetler <git@jeffhostetler.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test library puts helpers into $PATH, so we can simply call them
without specifying their location.
The suffix $X is also not necessary because .exe files on Windows can be
started without specifying their extension, and on other platforms it's
empty anyway.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Acked-by: Jeff Hostetler <git@jeffhostetler.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
fetch-pack, when fetching a literal SHA-1 from a server that is not
configured with uploadpack.allowtipsha1inwant (or similar), always
returns an error message of the form "Server does not allow request for
unadvertised object %s". However, it is sometimes the case that such
object is advertised. This situation would occur, for example, if a user
or a script was provided a SHA-1 instead of a branch or tag name for
fetching, and wanted to invoke "git fetch" or "git fetch-pack" using
that SHA-1.
Teach fetch-pack to also check the SHA-1s of the refs in the received
ref advertisement if a literal SHA-1 was given by the user.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The recent change that introduced autodecorating of refs accidentally
broke the ability of users to set log.decorate = false to override it.
When the git_log_config was traversed a second time with an option other
than log.decorate, the decoration style would be set to the automatic
style, even if the user had already overridden it. Instead of setting
the option in config parsing, set it in init_log_defaults instead.
Add a test for this case. The actual additional config option doesn't
matter, but it needs to be something not already set in the
configuration file.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Acked-by: Alex Henrie <alexhenrie24@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "--local" option instructs git-config to read or modify
the repository-level config. This doesn't make any sense if
you're not actually in a repository.
Older versions of Git would blindly try to read or write
".git/config". For reading, this would result in a quiet
failure, since there was no config to read (and thus no
matching config value). Writing would generally fail
noisily, since ".git" was unlikely to exist. But since
b1ef400ee (setup_git_env: avoid blind fall-back to ".git",
2016-10-20), we catch this in the call to git_pathdup() and
die with an assertion.
Dying is the right thing to do, but we should catch the
problem early and give a more human-friendly error message.
Note that even without --local, git-config will sometimes
default to using local repository config (e.g., when
writing). These cases are already protected by similar
checks, and covered by a test in t1308.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Converting to BUG() makes it easier to detect and debug
cases where we hit this assertion. Coupled with a new test
in t1300, this shows that the test suite can detect such
corner cases.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a test showing that runtimes of the wildmatch() function used for
globbing in git grow exponentially in the face of some pathological
globs.
This issue affects both globs matching filenames via e.g. ls-files,
and globs matching refnames via e.g. for-each-ref.
As noted in the test description this is a test to see whether Git
suffers from the issue noted in an article Russ Cox posted today about
common bugs in various glob implementations:
https://research.swtch.com/glob
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a function to setup a fresh test repo via 'git init' to compliment
the existing functions to copy over a normal & large repo.
Some performance tests don't need any existing repository data at all
to be significant, e.g. tests which stress glob matches against single
pathological revisions or files, which I'm about to add in a
subsequent commit.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The GETTEXT_POISON=YesPlease compile-time testing option added in my
bb946bba76 ("i18n: add GETTEXT_POISON to simulate unfriendly
translator", 2011-02-22) has been slowly bitrotting as strings have
been marked for translation, and new tests have been added without
running it.
I brought this up on the list ("[BUG] test suite broken with
GETTEXT_POISON=YesPlease", [1]) asking whether this mode was useful at
all anymore. At least one person occasionally uses it, and Lars
Schneider offered to change one of the the Travis builds to run in
this mode, so fix up the failing ones.
My test setup runs most of the tests, with the notable exception of
skipping all the p4 tests, so it's possible that there's still some
lurking regressions I haven't fixed.
1. <CACBZZX62+acvi1dpkknadTL827mtCm_QesGSZ=6+UnyeMpg8+Q@mail.gmail.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The purpose of t0027 is to test all CRLF related conversions at "git
checkout" and "git add". Running t0027 under Git for Windows takes
3-4 minutes, so the whole script had been marked as "EXPENSIVE".
However, the "Git for Windows" fork overrides this since 2014:
"t0027 is marked expensive, but really, for MinGW we want to run
these tests always."
The test seems not to be expensive on other platforms at all: it
takes less than 14 seconds under Linux, and 63 seconds under Mac Os
X, and this is more or less the same with a SSD or a spinning disk.
So let's drop the "EXPENSIVE" prereq.
While at it, retire t0025; recent "stress" tests show that t0025 is
flaky, reported by Lars Schneider <larsxschneider@gmail.com>, but
all tests in t0025 are covered by t0027 already.
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Acked-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently 'git add' is the only command which dies when launched from an
unpopulated submodule (the place-holder directory for a submodule which
hasn't been checked out). This is triggered implicitly by passing the
PATHSPEC_STRIP_SUBMODULE_SLASH_EXPENSIVE flag to 'parse_pathspec()'.
Instead make this desire more explicit by creating a function
'die_in_unpopulated_submodule()' which dies if the provided 'prefix' has
a leading path component which matches a submodule in the the index.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test t4051-diff-function-context.sh passes on Linux when
core.autocrlf=true even without marking its support files as LF-only,
but they fail when core.autocrlf=true in Git for Windows' SDK.
The reason is that `grep ... >file.c.new` will keep CR/LF line endings
on Linux (obviously treating CRs as if they were regular characters),
but will be converted to LF-only line endings with MSYS2's grep that is
used in Git for Windows.
As we do not want to validate the way the available `grep` works, let's
just mark the input as LF-only and move on.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test suite is mainly developed on Linux and MacOSX, which is the
reason that nobody thought to mark files as LF-only as needed.
The symptom is a test suite that fails left and right when being checked
out using Git for Windows (which defaults to core.autocrlf=true).
Mostly, the problems stem from Git's (LF-only) output being compared to
hard-coded files that are checked out with line endings according to
core.autocrlf (which is of course incorrect). This includes the two test
files in t/diff-lib/, README and COPYING.
This patch can be validated even on Linux by using this cadence:
git config core.autocrlf true
rm .git/index && git stash
make -j15 DEVELOPER=1 test
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current convention is to either generate files on the fly in tests,
or to use supporting files taken from a t/tNNNN/ directory (where NNNN
matches the test's number, or the number of the test from which we
borrow supporting files).
The test t3901-i18n-patch.sh was obviously introduced before that
convention was in full swing, hence its supporting files still lived in
t/t3901-8859-1.txt and t/t3901-utf8.txt, respectively.
Let's adjust to the current convention.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In commit f6a4e61 ("push: accept push options", 2016-07-14), send-pack
was taught to include push options both within the signed cert (if the
push is a signed push) and outside the signed cert; however,
receive-pack ignores push options within the cert, only handling push
options outside the cert.
Teach receive-pack, in the case that push options are provided for a
signed push, to verify that the push options both within the cert and
outside the cert are consistent.
This sets in stone the requirement that send-pack redundantly send its
push options in 2 places, but I think that this is better than the
alternatives. Sending push options only within the cert is
backwards-incompatible with existing Git servers (which read push
options only from outside the cert), and sending push options only
outside the cert means that the push options are not signed for.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The feature was included in v2.11 (released 2016-11-29) and we got no
negative feedback. Quite the opposite, all feedback we got was positive.
Turn it on by default. Users who dislike the feature can turn it off
by setting diff.indentHeuristic (which also configures plumbing commands,
see prior patches).
The change to t/t4051-diff-function-context.sh is needed because the
heuristic shifts the changed hunk in the patch. To get the same result
regardless of the heuristic configuration, we modify the test file
differently: We insert a completely new line after line 2, instead of
simply duplicating it.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Marc Branchaud <marcnarc@xiplink.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This matches how the diff Porcelain works. It makes the plumbing commands
respect diff's configuration options, such as indentHeuristic, because
init_revisions() calls diff_setup() which fills in the diff_options struct.
Signed-off-by: Marc Branchaud <marcnarc@xiplink.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Our usual shell style is to put the "do" of a loop on its
own line, like:
while $cond
do
something
done
instead of:
while $cond; do
something
done
We have a bit of both in our code base, but the former is
what's in CodingGuidelines (and outnumbers the latter in t/
by about 6:1).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If certain options like --honor-pack-keep, --local, or
--incremental are used with pack-objects, then we need to
feed each potential object to want_object_in_pack() to see
if it should be filtered out. But when the bitmap
reuse_packfile optimization is in effect, we do not call
that function at all, and in fact skip adding the objects to
the to_pack list entirely. This means we have a bug: for
certain requests we will silently ignore those options and
include objects in that pack that should not be there.
The problem has been present since the inception of the
pack-reuse code in 6b8fda2db (pack-objects: use bitmaps when
packing objects, 2013-12-21), but it was unlikely to come up
in practice. These options are generally used for on-disk
packing, not transfer packs (which go to stdout), but we've
never allowed pack reuse for non-stdout packs (until
645c432d6, we did not even use bitmaps, which the reuse
optimization relies on; after that, we explicitly turned it
off when not packing to stdout).
We can fix this by just disabling the reuse_packfile
optimization when the options are in use. In theory we could
teach the pack-reuse code to satisfy these checks, but it's
not worth the complexity. The purpose of the optimization is
to keep the amount of per-object work we do to a minimum.
But these options inherently require us to search for other
copies of each object, drowning out any benefit of the
pack-reuse optimization. But note that the optimizations
from 56dfeb626 (pack-objects: compute local/ignore_pack_keep
early, 2016-07-29) happen before pack-reuse, meaning that
specifying "--honor-pack-keep" in a repository with no .keep
files can still follow the fast path.
There are tests in t5310 that check these options with
bitmaps and --stdout, but they didn't catch the bug, and
it's hard to adapt them to do so.
One problem is that they don't use --delta-base-offset;
without that option, we always disable the reuse
optimization entirely. It would be fine to add it in (it
actually makes the test more realistic), but that still
isn't quite enough.
The other problem is that the reuse code is very picky; it
only kicks in when it can reuse most of a pack, starting
from the first byte. So we'd have to start from a fully
repacked and bitmapped state to trigger it. But the tests
for these options use a much more subtle state; they want to
be sure that the want_object_in_pack() code is allowing some
objects but not others. Doing a full repack runs counter to
that.
So this patch adds new tests at the end of the script which
create the fully-packed state and make sure that each option
is not fooled by reusable pack.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert parse_tree_indirect to take a pointer to struct object_id.
Update all the callers. This transformation was achieved using the
following semantic patch and manual updates to the declaration and
definition. Update builtin/checkout.c manually as well, since it uses a
ternary expression not handled by the semantic patch.
@@
expression E1;
@@
- parse_tree_indirect(E1.hash)
+ parse_tree_indirect(&E1)
@@
expression E1;
@@
- parse_tree_indirect(E1->hash)
+ parse_tree_indirect(E1)
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rebasing onto many changes is interesting, but it's also
interesting to see what happens when rebasing many changes.
And while at it, let's also look at the impact of using a
split index.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When fd47ae6a5b (diff: teach diff to display submodule difference with an
inline diff, 2016-08-31) was introduced, we did not think of recursing
into nested submodules.
When showing the inline diff for submodules, automatically recurse
into nested submodules as well with inline submodule diffs.
Signed-off-by: Stefan Beller <sbeller@google.com>
Acked-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We forgot to prepare the submodule env, which is only a problem for
nested submodules. See 2e5d6503bd (ls-files: fix recurse-submodules
with nested submodules, 2017-04-13) for further explanation.
To come up with a proper test for this, we'd need to look at nested
submodules just as in that given commit. It turns out we're lucky
and these tests already exist, but are marked as failing. We need
to pass `--recurse-submodules` to read-tree additionally to make
these tests pass. Passing that flag alone would not make the tests
pass, such that this covers testing for the bug fix of the submodule
env as well.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git clone --config" uses the following incantation to add an item to
a config file, instead of replacing an existing value:
git_config_set_multivar_gently(key, value, "^$", 0)
As long as no existing value matches the regex ^$, that works as
intended and adds to the config. When a value is empty, though, it
replaces the existing value.
Noticed while trying to set credential.helper during a clone to use a
specific helper without inheriting from ~/.gitconfig and
/etc/gitconfig. That is, I ran
git clone -c credential.helper= \
-c credential.helper=myhelper \
https://example.com/repo
intending to produce the configuration
[credential]
helper =
helper = myhelper
Without this patch, the 'helper =' line is not included and the
credential helper from /etc/gitconfig gets used.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert the sha1 member of struct cache_tree to struct object_id by
changing the definition and applying the following semantic patch, plus
the standard object_id transforms:
@@
struct cache_tree E1;
@@
- E1.sha1
+ E1.oid.hash
@@
struct cache_tree *E1;
@@
- E1->sha1
+ E1->oid.hash
Fix up one reference to active_cache_tree which was not automatically
caught by Coccinelle. These changes are prerequisites for converting
parse_object.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git rebase -i" failed to re-read the todo list file when the
command specified with the `exec` instruction updated it.
* sh/rebase-i-reread-todo-after-exec:
rebase -i: reread the todo list if `exec` touched it
Fix a segv in 'submodule init' when url is not given for a submodule.
* jk/submodule-init-segv-fix:
submodule_init: die cleanly on submodules without url defined
Rename the t5614-clone-submodules.sh test to
t5614-clone-submodules-shallow.sh. It's not a general test of
submodules, but of shallow cloning in relation to submodules. Move it
to create another similar t56*-clone-submodules-*.sh test.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a --no-tags option to clone without fetching any tags.
Without this change there's no easy way to clone a repository without
also fetching its tags.
When supplying --single-branch the primary remote branch will be
cloned, but in addition tags will be followed & retrieved. Now
--no-tags can be added --single-branch to clone a repository without
tags, and which only tracks a single upstream branch.
This option works without --single-branch as well, and will do a
normal clone but not fetch any tags.
Many git commands pay some fixed overhead as a function of the number
of references. E.g. creating ~40k tags in linux.git will cause a
command like `git log -1 >/dev/null` to run in over a second instead
of in a matter of milliseconds, in addition numerous other things will
slow down, e.g. "git log <TAB>" with the bash completion will slowly
show ~40k references instead of 1.
The user might want to avoid all of that overhead to simply use a
repository like that to browse the "master" branch, or something like
a CI tool might want to keep that one branch up-to-date without caring
about any other references.
Without this change the only way of accomplishing this was either by
manually tweaking the config in a fresh repository:
git init git &&
cat >git/.git/config <<EOF &&
[remote "origin"]
url = git@github.com:git/git.git
tagOpt = --no-tags
fetch = +refs/heads/master:refs/remotes/origin/master
[branch "master"]
remote = origin
merge = refs/heads/master
EOF
cd git &&
git pull
Which requires hardcoding the "master" name, which may not be the main
--single-branch would have retrieved, or alternatively by setting
tagOpt=--no-tags right after cloning & deleting any existing tags:
git clone --single-branch git@github.com:git/git.git &&
cd git &&
git config remote.origin.tagOpt --no-tags &&
git tag -l | xargs git tag -d
Which of course was also subtly buggy if --branch was pointed at a
tag, leaving the user in a detached head:
git clone --single-branch --branch v2.12.0 git@github.com:git/git.git &&
cd git &&
git config remote.origin.tagOpt --no-tags &&
git tag -l | xargs git tag -d
Now all this complexity becomes the much simpler:
git clone --single-branch --no-tags git@github.com:git/git.git
Or in the case of cloning a single tag "branch":
git clone --single-branch --branch v2.12.0 --no-tags git@github.com:git/git.git
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change occurrences "cd" followed by "fetch" on a single line to be on
two lines.
This is purely a stylistic change pointed out in code review for an
unrelated patch. Change the these tests use so new tests added later
using the more common style don't look out of place.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit cf9e55f494 ("submodule: prevent backslash expantion in submodule
names", 07-04-2017) added a test which creates a git repository with
some backslash characters in the name. On windows, where the backslash
character is a directory separator, it is not possible to create a
repository with the name 'sub\with\backslash'. (The NTFS filesystem would
probably allow it, but the win32 api does not). The MinGW and Git for
Windows versions of git actually create a repository called 'backslash'
in the sub-directory 'sub/with'.
On cygwin, however, due to the slightly schizophrenic treatment of the
backslash character by cygwin-git, this test fails at the 'git init'
stage. The git-init command does not recognise the directory separators
in the input path (eg. is_dir_sep('\\') is false), so it does not
attempt to create the leading directories 'sub/with'. (The call to
mkdir('sub\\with\\backslash') actually does recognise the directory
separators, but fails because the 'sub/with' directory doesn't exist).
In order to suppress the test failure (for now), add the !CYGWIN test
prerequisite.
Signed-off-by: Ramsay Jones <ramsay@ramsayjones.plus.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Check if unzip supports the ZIP64 format and skip the tests that create
big archives otherwise. Also skip the test that archives a big file on
32-bit platforms because the git object systems can't unpack files
bigger than 4GB there.
Reported-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add color config slots to be used in the status short-format when
displaying local and remote tracking branch information.
[jc: rebased on top of Peff's fix to 'git status' and tweaked the
test to check both local and remote-tracking branch output]
Signed-off-by: Stephen Kent <smkent@smkent.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When git-status shows tracking data for the current branch
in the long format, we try to end the stanza with a blank
line. When status.displayCommentPrefix is true, we call
color_fprintf_ln() to do so. But when it's false, we call
the enigmatic:
fputs("", s->fp);
which does nothing at all! This is a bug from 7d7d68022
(silence a bunch of format-zero-length warnings,
2014-05-04). Prior to that, we called fprintf_ln() with an
empty string. Switching to fputs() meant we needed to
include the "newline in the string, but we didn't.
So you see:
On branch jk/status-tracking-newline
Your branch is ahead of 'origin/master' by 1 commit.
Changes not staged for commit:
modified: foo
Untracked files:
bar
whereas there should be a blank line before the "Changes not
staged" line.
The fix itself is a one-liner. But we never noticed this
bug because t7508 doesn't exercise the ahead/behind code at
all. So let's configure an upstream during the initial
setup, which means that the code will be exercised as part
of all of the various invocations in that script. This makes
the diff rather noisy, but should give us good coverage.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git's source code assumes that unsigned long is at least as precise as
time_t. Which is incorrect, and causes a lot of problems, in particular
where unsigned long is only 32-bit (notably on Windows, even in 64-bit
versions).
So let's just use a more appropriate data type instead. In preparation
for this, we introduce the new `timestamp_t` data type.
By necessity, this is a very, very large patch, as it has to replace all
timestamps' data type in one go.
As we will use a data type that is not necessarily identical to `time_t`,
we need to be very careful to use `time_t` whenever we interact with the
system functions, and `timestamp_t` everywhere else.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the scripted version of the interactive rebase, there was no internal
representation of the todo list; it was re-read before every command.
That allowed the hack that an `exec` command could append (or even
completely rewrite) the todo list.
This hack was broken by the partial conversion of the interactive rebase
to C, and this patch reinstates it.
We also add a small test to verify that this fix does not regress in the
future.
Signed-off-by: Stephen Hicks <sdh@google.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When encountering a commit message that does not end in a newline,
sequencer does not complete the line before determining if a blank line
should be added. This causes the "(cherry picked..." and sign-off lines
to sometimes appear on the same line as the last line of the commit
message.
This behavior was introduced by commit 967dfd4 ("sequencer: use
trailer's trailer layout", 2016-11-29). However, a revert of that commit
would not resolve this issue completely: prior to that commit, a
conforming footer was deemed to be non-conforming by
has_conforming_footer() if there was no terminating newline, resulting
in both conforming and non-conforming footers being treated the same
when they should not be.
Resolve this issue, both for conforming and non-conforming footers, and
in both do_pick_commit() and append_signoff(), by always adding a
newline to the commit message if it does not end in one before checking
the footer for conformity.
Reported-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous step added a path zzzzzzzz to the index, and then used
"sed" to replace this string to yyyyyyyy to create a test case where
the checksum at the end of the file does not match the contents.
Unfortunately, use of "sed" on a non-text file is not portable.
Instead, use a Perl script that seeks to the end and modifies the
last byte of the file (where we _know_ stores the trailing
checksum).
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow to lock a worktree immediately after it's created. This helps
prevent a race between "git worktree add; git worktree lock" and
"git worktree prune".
* nd/worktree-add-lock:
worktree add: add --lock option
The completion script (in contrib/) learned to complete "git push
--delete b<TAB>" to complete branch name to be deleted.
* ab/completion-push-delete-ref:
completion: expand "push --delete <remote> <ref>" for refs on that <remote>
"git checkout" that handles a lot of paths has been optimized by
reducing the number of unnecessary checks of paths in the
has_dir_name() function.
* jh/add-index-entry-optim:
read-cache: speed up has_dir_name (part 2)
read-cache: speed up has_dir_name (part 1)
read-cache: speed up add_index_entry during checkout
p0006-read-tree-checkout: perf test to time read-tree
read-cache: add strcmp_offset function
The recently introduced conditional inclusion of configuration did
not work well when early-config mechanism was involved.
* nd/conditional-config-in-early-config:
config: correct file reading order in read_early_config()
config: handle conditional include when $GIT_DIR is not set up
config: prepare to pass more info in git_config_with_options()
A recent update broke "git add -p ../foo" from a subdirectory.
* ps/pathspec-empty-prefix-origin:
pathspec: honor `PATHSPEC_PREFIX_ORIGIN` with empty prefix
Having a git command on the upstream side of a pipe in a test
script will hide the exit status from the command, which may cause
us to fail to notice a breakage; rewrite tests in a script to avoid
this issue.
* pc/t2027-git-to-pipe-cleanup:
t2027: avoid using pipes
"git rebase" learns "--signoff" option.
* gb/rebase-signoff:
rebase: pass --[no-]signoff option to git am
builtin/am: fold am_signoff() into am_append_signoff()
builtin/am: honor --signoff also when --rebasing
In some situations run-command will incorrectly try (and fail) to
execute a directory instead of an executable file. This was observed by
having a directory called "ssh" in $PATH before the real ssh and trying
to use ssh protoccol, reslting in the following:
$ git ls-remote ssh://url
fatal: cannot exec 'ssh': Permission denied
It ends up being worse and run-command will even try to execute a
non-executable file if it preceeds the executable version of a file on
the PATH. For example, if PATH=~/bin1:~/bin2:~/bin3 and there exists a
directory 'git-hello' in 'bin1', a non-executable file 'git-hello' in
bin2 and an executable file 'git-hello' (which prints "Hello World!") in
bin3 the following will occur:
$ git hello
fatal: cannot exec 'git-hello': Permission denied
This is due to only checking 'access()' when locating an executable in
PATH, which doesn't distinguish between files and directories. Instead
use 'is_executable()' which check that the path is to a regular,
executable file. Now run-command won't try to execute the directory or
non-executable file 'git-hello':
$ git hello
Hello World!
which matches what execvp(3) would have done when asked to execute
git-hello with such a $PATH.
Reported-by: Brian Hatfield <bhatfield@google.com>
Signed-off-by: Brandon Williams <bmwill@google.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The convention "$remove_trash is set to the trash directory that is
used during the test, so that it will be removed at the end, but
under --debug option we set the varilable to empty string to
preserve the directory" made sense back when it was introduced, as
there was no $TRASH_DIRECTORY variable. These days, since no tests
looks at the variable, it is obscure and even risks that by mistake
the variable gets used for something else (e.g. remove_trash=yes)
and cause us misbehave. Worse yet, remove_trash was not initialized
to an empty string at the beginning, so a stray environment variable
the user has could have affected the logic when "--debug" is in use.
Rewrite the clean-up sequence in test_done helper to explicitly
check the $debug condition and remove the trash directory using
the $TRASH_DIRECTORY variable.
Note that "go to the directory one level above the trash and then
remove it" is kept and this is deliverate; test_at_end_hook_ will
keep running from the expected location, and also some platforms may
not like a directory that is serving as the $cwd of a still-active
process removed.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The original did "does $remove_trash exist? Then go one level above
and remove it". There was no problem under "--debug", where
the variable is left empty, as the first "test -d $remove_trash" would
have said "No, it doesn't".
With the check implemented in the previous step, we'd always get an
error under "--debug".
Noticed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Write a zip64 extended information extra field for big files as part of
their local headers and as part of their central directory headers.
Also write a zip64 version of the data descriptor in that case.
If we're streaming then we don't know the compressed size at the time we
write the header. Deflate can end up making a file bigger instead of
smaller if we're unlucky. Write a local zip64 header already for files
with a size of 2GB or more in this case to be on the safe side.
Both sizes need to be included in the local zip64 header, but the extra
field for the directory must only contain 64-bit equivalents for 32-bit
values of 0xffffffff.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a zip64 extended information extra field to the central directory
and emit the zip64 end of central directory records as well as locator
if the offset of an entry within the archive exceeds 4GB.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Test the creation of ZIP archives bigger than 4GB and containing files
bigger than 4GB. They are marked as EXPENSIVE because they take quite a
while and because the first one needs a bit more than 4GB of disk space
to store the resulting archive.
The big archive in the first test is made up of a tree containing
thousands of copies of a small file. Yet the test has to write out the
full archive because unzip doesn't offer a way to read from stdin.
The big file in the second test is provided as a zipped pack file to
avoid writing another 4GB file to disk and then adding it.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
70999e9cec (branch -m: update all per-worktree HEADs - 2016-03-27)
added this function in order to update HEADs of all relevant
worktrees, when a branch is renamed.
It, as a public ref api, kind of breaks abstraction when it uses
internal functions of files backend. With the introduction of
refs_create_symref(), we can move back pretty close to the code before
70999e9cec, where create_symref() was used for updating HEAD.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The manual parsing code is replaced with a call to refs_resolve_ref_unsafe().
The manual parsing code must die because only refs/files-backend.c
should do that.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we init a submodule, we try to die when it has no URL
defined:
url = xstrdup(sub->url);
if (!url)
die(...);
But that's clearly nonsense. xstrdup() will never return
NULL, and if sub->url is NULL, we'll segfault.
These two bits of code need to be flipped, so we check
sub->url before looking at it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"ls-files --recurse-submodules" did not quite work well in a
project with nested submodules.
* jk/ls-files-recurse-submodules-fix:
ls-files: fix path used when recursing into submodules
ls-files: fix recurse-submodules with nested submodules
Add finishing touches to a recent topic.
* jk/quarantine-received-objects:
refs: reject ref updates while GIT_QUARANTINE_PATH is set
receive-pack: document user-visible quarantine effects
receive-pack: drop tmp_objdir_env from run_update_hook
"git submodule" script does not work well with strange pathnames.
Protect it from a path with slashes in them, at least.
* bw/submodule-with-bs-path:
submodule: prevent backslash expantion in submodule names
The index file has a trailing SHA-1 checksum to detect file
corruption, and historically we checked it every time the index
file is used. Omit the validation during normal use, and instead
verify only in "git fsck".
* jh/verify-index-checksum-only-in-fsck:
read-cache: force_verify_index_checksum
The string-list API used a custom reallocation strategy that was
very inefficient, instead of using the usual ALLOC_GROW() macro,
which has been fixed.
* jh/string-list-micro-optim:
string-list: use ALLOC_GROW macro when reallocing string_list
$GIT_DIR may in some cases be normalized with all symlinks resolved
while "gitdir" path expansion in the pattern does not receive the
same treatment, leading to incorrect mismatch. This has been fixed.
* nd/conditional-config-include:
config: resolve symlinks in conditional include's patterns
path.c: and an option to call real_path() in expand_user_path()
Change the test descriptions from being treated as binary blobs by
perl to being treated as UTF-8. This ensures that e.g. a test
description like "æ" is counted as 1 character, not 2.
I have WIP performance tests for non-ASCII grep patterns on another
topic that are affected by this.
Now instead of:
$ ./run p0000-perf-lib-sanity.sh
[...]
0000.4: export a weird var 0.00(0.00+0.00)
0000.5: éḿíẗ ńöń-ÁŚĆÍÍ ćḧáŕáćẗéŕś 0.00(0.00+0.00)
0000.7: important variables available in subshells 0.00(0.00+0.00)
[...]
We emit:
[...]
0000.4: export a weird var 0.00(0.00+0.00)
0000.5: éḿíẗ ńöń-ÁŚĆÍÍ ćḧáŕáćẗéŕś 0.00(0.00+0.00)
0000.7: important variables available in subshells 0.00(0.00+0.00)
[...]
Fixes code originally added in 342e9ef2d9 ("Introduce a performance
testing framework", 2012-02-17).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, Git's source code treats all timestamps as if they were
unsigned longs. Therefore, it is okay to write "%lu" when printing them.
There is a substantial problem with that, though: at least on Windows,
time_t is *larger* than unsigned long, and hence we will want to switch
away from the ill-specified `unsigned long` data type.
So let's introduce the pseudo format "PRItime" (currently simply being
defined to "lu") to make it easier to change the data type used for
timestamps.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, Git's source code represents all timestamps as `unsigned
long`. In preparation for using a more appropriate data type, let's
introduce a symbol `parse_timestamp` (currently being defined to
`strtoul`) where appropriate, so that we can later easily switch to,
say, use `strtoull()` instead.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We generally disallow null sha1s from entering the index,
due to 4337b5856 (do not write null sha1s to on-disk index,
2012-07-28). However, we loosened that in 83bd7437c
(write_index: optionally allow broken null sha1s,
2013-08-27) so that tools like filter-branch could be used
to repair broken history.
However, we should make sure that these broken entries do
not get propagated into new trees. For most entries, we'd
catch them with the missing-object check (since presumably
the null sha1 does not exist in our object database). But
gitlink entries do not need reachability, so we may blindly
copy the entry into a bogus tree.
This patch rejects all null sha1s (with the same "invalid
entry" message that missing objects get) when building trees
from the index. It does so even for non-gitlinks, and even
when "write-tree" is given the --missing-ok flag. The null
sha1 is a special sentinel value that is already rejected in
trees by fsck; whether the object exists or not, it is an
error to put it in a tree.
Note that for this to work, we must also avoid reusing an
existing cache-tree that contains the null sha1. This patch
does so by just refusing to write out any cache tree when
the index contains a null sha1. This is blunter than we need
to be; we could just reject the subtree that contains the
offending entry. But it's not worth the complexity. The
behavior is unchanged unless you have a broken index entry,
and even then we'd refuse the whole index write unless the
emergency GIT_ALLOW_NULL_SHA1 is in use. And even then the
end result is only a performance drop (any write-tree will
have to generate the whole cache-tree from scratch).
The tests bear some explanation.
The existing test in t7009 doesn't catch this problem,
because our index-filter runs "git rm --cached", which will
try to rewrite the updated index and barf on the bogus
entry. So we never even make it to write-tree. The new test
there adds a noop index-filter, which does show the problem.
The new tests in t1601 are slightly redundant with what
filter-branch is doing under the hood in t7009. But as
they're much more direct, they're easier to reason about.
And should filter-branch ever change or go away, we'd want
to make sure that these plumbing commands behave sanely.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-reset is yet another working tree manipulator, which should
be taught about submodules.
When a user uses git-reset and requests to recurse into submodules,
this will reset the submodules to the object name as recorded in the
superproject, detaching the HEADs.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the completion of "push --delete <remote> <ref>" to complete
refs on that <remote>, not all refs.
Before this cloning git.git and doing "git push --delete origin
p<TAB>" will complete nothing, since a fresh clone of git.git will
have no "pu" branch, whereas origin/p<TAB> will uselessly complete
origin/pu, but fully qualified references aren't accepted by
"--delete".
Now p<TAB> will complete as "pu". The completion of giving --delete
later, e.g. "git push origin --delete p<TAB>" remains unchanged, this
is a bug, but is a general existing limitation of the bash completion,
and not how git-push is documented, so I'm not fixing that case, but
adding a failing TODO test for it.
The testing code was supplied by SZEDER Gábor in
<20170421122832.24617-1-szeder.dev@gmail.com> with minor setup
modifications on my part.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: SZEDER Gábor <szeder.dev@gmail.com>
Test-code-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We had two similar bugs in the tests sporadically triggering error
messages during the removal of the trash directory, see commits
bb05510e5 (t5510: run auto-gc in the foreground, 2016-05-01) and
ef09036cf (t6500: wait for detached auto gc at the end of the test
script, 2017-04-13). The test script succeeded nonetheless, because
these errors are ignored during housekeeping in 'test_done'.
However, such an error is a sign that something is fishy in the test
script. Print an error message and abort the test script when the
trash directory can't be removed successfully or is already removed,
because that's unexpected and we would prefer somebody notice and
figure out why.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git's source code refers to timestamps as unsigned long, which is
ill-defined, as there is no guarantee about the number of bits that
data type has.
In preparation of switching to another data type that is large enough
to hold "far in the future" dates, we need to prepare the t0006-date.sh
script for the case where we *still* cannot format those dates if the
system library uses 32-bit time_t.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git's source code refers to timestamps as unsigned longs. On 32-bit
platforms, as well as on Windows, unsigned long is not large enough to
capture dates that are "absurdly far in the future".
It is perfectly valid by the C standard, of course, for the `long` data
type to refer to 32-bit integers. That is why the `time_t` data type
exists: so that it can be 64-bit even if `long` is 32-bit. Git's source
code simply uses an incorrect data type for timestamps, is all.
The earlier quick fix 6b9c38e14c (t0006: skip "far in the future" test
when unsigned long is not long enough, 2016-07-11) papered over this
issue simply by skipping the respective test cases on platforms where
they would fail due to the data type in use.
This quick fix, however, tests for *long* to be 64-bit or not. What we
need, though, is a test that says whether *whatever data type we use for
timestamps* is 64-bit or not.
The same quick fix was used to handle the similar problem where Git's
source code uses `unsigned long` to represent size, instead of `size_t`,
conflating the two issues.
So let's just add another prerequisite to test specifically whether
timestamps are represented by a 64-bit data type or not. Later, after we
switch to a larger data type, we can flip that prerequisite to test
`time_t` instead of `long`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As explained in the document. This option has an advantage over the
command sequence "git worktree add && git worktree lock": there will be
no gap that somebody can accidentally "prune" the new worktree (or soon,
explicitly "worktree remove" it).
"worktree add" does keep a lock on while it's preparing the worktree.
If --lock is specified, this lock remains after the worktree is created.
Suggested-by: David Taylor <David.Taylor@dell.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a test to 't0061-run-command.sh' to ensure that run_command can
continue to execute scripts which don't include a '#!' line.
As shell scripts are not natively executable on Windows, we use a
workaround to check "#!" when running scripts from Git. As this
test requires the platform (not with Git's help) to run scripts
without "#!", skipt it on Windows.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Hotfix for a topic that is already in 'master'.
* jh/memihash-opt:
p0004: make perf test executable
t3008: skip lazy-init test on a single-core box
test-online-cpus: helper to return cpu count
name-hash: fix buffer overrun
"git p4" used "name-rev HEAD" when it wants to learn what branch is
checked out; it should use "symbolic-ref HEAD".
* ld/p4-current-branch-fix:
git-p4: don't use name-rev to get current branch
git-p4: add read_pipe_text() internal function
git-p4: add failing test for name-rev rather than symbolic-ref
Clean up fallouts from recent tightening of the set-up sequence,
where Git barfs when repository information is accessed without
first ensuring that it was started in a repository.
* jk/no-looking-at-dotgit-outside-repo:
test-read-cache: setup git dir
has_sha1_file: don't bother if we are not in a repository
The "submodule" specific field in the ref_store structure is
replaced with a more generic "gitdir" that can later be used also
when dealing with ref_store that represents the set of refs visible
from the other worktrees.
* nd/files-backend-git-dir: (28 commits)
refs.h: add a note about sorting order of for_each_ref_*
t1406: new tests for submodule ref store
t1405: some basic tests on main ref store
t/helper: add test-ref-store to test ref-store functions
refs: delete pack_refs() in favor of refs_pack_refs()
files-backend: avoid ref api targeting main ref store
refs: new transaction related ref-store api
refs: add new ref-store api
refs: rename get_ref_store() to get_submodule_ref_store() and make it public
files-backend: replace submodule_allowed check in files_downcast()
refs: move submodule code out of files-backend.c
path.c: move some code out of strbuf_git_path_submodule()
refs.c: make get_main_ref_store() public and use it
refs.c: kill register_ref_store(), add register_submodule_ref_store()
refs.c: flatten get_ref_store() a bit
refs: rename lookup_ref_store() to lookup_submodule_ref_store()
refs.c: introduce get_main_ref_store()
files-backend: remove the use of git_path()
files-backend: add and use files_ref_path()
files-backend: add and use files_reflog_path()
...
If a patch e-mail had its first paragraph after an in-body header
indented (even after a blank line after the in-body header line),
the indented line was mistook as a continuation of the in-body
header. This has been fixed.
* lt/mailinfo-in-body-header-continuation:
mailinfo: fix in-body header continuations
"git push --recurse-submodules --push-option=<string>" learned to
propagate the push option recursively down to pushes in submodules.
* bw/push-options-recursively-to-submodules:
push: propagate remote and refspec with --recurse-submodules
submodule--helper: add push-check subcommand
remote: expose parse_push_refspec function
push: propagate push-options with --recurse-submodules
push: unmark a local variable as static
Conversion from unsigned char [40] to struct object_id continues.
* bc/object-id:
Documentation: update and rename api-sha1-array.txt
Rename sha1_array to oid_array
Convert sha1_array_for_each_unique and for_each_abbrev to object_id
Convert sha1_array_lookup to take struct object_id
Convert remaining callers of sha1_array_lookup to object_id
Make sha1_array_append take a struct object_id *
sha1-array: convert internal storage for struct sha1_array to object_id
builtin/pull: convert to struct object_id
submodule: convert check_for_new_submodule_commits to object_id
sha1_name: convert disambiguate_hint_fn to take object_id
sha1_name: convert struct disambiguate_state to object_id
test-sha1-array: convert most code to struct object_id
parse-options-cb: convert sha1_array_append caller to struct object_id
fsck: convert init_skiplist to struct object_id
builtin/receive-pack: convert portions to struct object_id
builtin/pull: convert portions to struct object_id
builtin/diff: convert to struct object_id
Convert GIT_SHA1_RAWSZ used for allocation to GIT_MAX_RAWSZ
Convert GIT_SHA1_HEXSZ used for allocation to GIT_MAX_HEXSZ
Define new hash-size constants for allocating memory
The output from "git status --short" has been extended to show
various kinds of dirtyness in submodules differently; instead of to
"M" for modified, 'm' and '?' can be shown to signal changes only
to the working tree of the submodule but not the commit that is
checked out.
* sb/submodule-short-status:
submodule.c: correctly handle nested submodules in is_submodule_modified
short status: improve reporting for submodule changes
submodule.c: stricter checking for submodules in is_submodule_modified
submodule.c: port is_submodule_modified to use porcelain 2
submodule.c: convert is_submodule_modified to use strbuf_getwholeline
submodule.c: factor out early loop termination in is_submodule_modified
submodule.c: use argv_array in is_submodule_modified
Created t/perf/repos/many-files.sh to generate large, but
artificial repositories.
Created t/perf/inflate-repo.sh to alter an EXISTING repo
to have a set of large commits. This can be used to create
a branch with 1M+ files in repositories like git.git or
linux.git, but with more realistic content. It does this
by making multiple copies of the entire worktree in a series
of sub-directories.
The branch name and ballast structure created by both scripts
match, so either script can be used to generate very large
test repositories for the following perf test.
Created t/perf/p0006-read-tree-checkout.sh to measure
performance on various read-tree, checkout, and update-index
operations. This test can run using either normal repos or
ones from the above scripts.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Document & test for cases where there are two remotes pointing to the
same URL, and a background fetch & subsequent `git push
--force-with-lease` shouldn't clobber un-updated references we haven't
fetched.
Some editors like Microsoft's VSC have a feature to auto-fetch in the
background, this bypasses the protections offered by
--force-with-lease & --force-with-lease=<refname>, as noted in the
documentation being added here.
See the 'Tools that do an automatic fetch defeat "git push
--force-with-lease"' (<1491617750.2149.10.camel@mattmccutchen.net>)
git mailing list thread for more details. Jakub Narębski suggested
this method of adding another remote to bypass this edge case,
document that & add a test for it.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Config file reading order is important because each file can override
values in the previous files and this is expected behavior. Normally
we read in this order, all in do_git_config_sequence():
1. $HOME/.gitconfig
2. $GIT_DIR/config
3. config from command line
However in read_early_config() the order may be swapped a bit if
setup_git_directory() has not been called:
1. $HOME/.gitconfig
2. $GIT_DIR/config is NOT read because .git dir is not found _yet_
3. config from command line
4. $GIT_DIR/config is now READ (after discover_git_directory() call)
The reading at step 4 could override config at step 3, which is not
the expectation.
Now that we could pass the .git dir around, we could feed
discover_git_directory() back to step 2, so that it works again, and
remove step 4.
Noticed-by: Jeff King <peff@peff.net>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The post-update hooks created in t5550-http-fetch-dumb.sh is missing the
"!#/bin/sh" line which can cause issues with portability. Instead
create the hook using the 'write_script' function which includes the
proper "#!" line.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Early on in submodule_move_head just after the check if the submodule is
initialized, we need to check if the submodule is populated correctly.
If the submodule is initialized but doesn't look like it is populated,
this is a red flag and can indicate multiple sorts of failures:
(1) The submodule may be recorded at an object name, that is missing.
(2) The submodule '.git' file link may be broken and it is not pointing
at a repository.
In both cases we want to complain to the user in the non-forced mode,
and in the forced mode ignoring the old state and just moving the
submodule into its new state with a fixed '.git' file link.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This was an oversight when working on the working tree modifying commands
recursing into submodules.
To test for uninitialized submodules, introduce another submodule
"uninitialized_sub". Adding it via `submodule add` will activate the
submodule in the preparation area (in create_lib_submodule_repo we
setup all the things in submodule_update_repo), but the later tests
will use a new testing repo that clones the preparation repo
in which the new submodule is not initialized.
By adding it to the branch "add_sub1", which is the starting point of
all other branches, we have wide coverage.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This makes it easy to sign off a whole patchset before submission.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It looks like in 89c3b0ad43 (name-hash: add perf test for lazy_init_name_hash,
2017-03-23) p0004 was not created with the execute unix rights.
Let's fix that.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Acked-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Don't assume that the current working directory is the root of the
repository. Correctly generate the path for the recursing child
processes by building it from the work_tree() root instead. Otherwise if
we run ls-files using --git-dir or --work-tree it will not work
correctly as it attempts to change directory into a potentially invalid
location. Best case, it doesn't exist and we produce an error. Worst
case we cd into the wrong location and unknown behavior occurs.
Add a new test which highlights this possibility.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If setup_git_directory() and friends have not been called,
get_git_dir() (because of includeIf.gitdir:XXX) would lead to
die("BUG: setup_git_env called without repository");
There are two cases when a config file could be read before $GIT_DIR
is located.
The first one is check_repository_format(), where we read just the one
file $GIT_DIR/config to check if we could understand this
repository. This case should be safe. We do not parse include
directives, which can only be triggered from git_config_with_options,
but setup code uses a lower-level function. The concerned variables
should never be hidden away behind includes anyway.
The second one is triggered in check_pager_config() when we're about
to run an external git command. We might be able to find $GIT_DIR in
this case, which is exactly what read_early_config() does (and also is
what check_pager_config() uses). Conditional includes and
get_git_dir() could be triggered by the first
git_config_with_options() call there, before discover_git_directory()
is used as a fallback $GIT_DIR detection.
Detect this special "early reading" case, pass down the $GIT_DIR,
either from previous setup or detected by discover_git_directory(),
and make conditional include use it.
Noticed-by: Bert Wesarg <bert.wesarg@googlemail.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since commit e77aa336f1 ("ls-files: optionally recurse into
submodules", 2016-10-07) ls-files has known how to recurse into
submodules when displaying files.
Unfortunately this fails for certain cases, including when nesting more
than one submodule, called from within a submodule that itself has
submodules, or when the GIT_DIR environemnt variable is set.
Prior to commit b58a68c1c1 ("setup: allow for prefix to be passed to
git commands", 2017-03-17) this resulted in an error indicating that
--prefix and --super-prefix were incompatible.
After this commit, instead, the process loops forever with a GIT_DIR set
to the parent and continuously reads the parent submodule files and
recursing forever.
Fix this by preparing the environment properly for submodules when
setting up the child process. This is similar to how other commands such
as grep behave.
This was not caught by the original tests because the scenario is
avoided if the submodules are created separately and not stored as the
standard method of putting the submodule git directory under
.git/modules/<name>. We can update the test to show the failure by the
addition of "git submodule absorbgitdirs" to the test case. However,
note that this new test would run forever without the necessary fix in
this patch.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Structure calls as
test_expect_success 'description' '
body
'
Use double quotes for the description if it requires parameter
expansion or contains a single quote.
Signed-off-by: Kyle Meyer <kyle@kyleam.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git diff --submodule=diff" learned to work better in a project
with a submodule that in turn has its own submodules.
* sb/show-diff-for-submodule-in-diff-fix:
diff: submodule inline diff to initialize env array.
Update error handling for codepath that deals with corrupt loose
objects.
* jk/loose-object-info-report-error:
index-pack: detect local corruption in collision check
sha1_loose_object_info: return error for corrupted objects
git-p4 was using "git name-rev" to find out the current branch.
That is not safe, since if multiple branches or tags point at
the same revision, the result obtained might not be what is
expected.
Instead use "git symbolic-ref".
Signed-off-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Using name-rev to find the current git branch means that git-p4
does not correctly get the current branch name if there are
multiple branches pointing at HEAD, or a tag.
This change adds a test case which demonstrates the problem.
Configuring which branches are allowed to be submitted from goes
wrong, as git-p4 gets confused about which branch is in use.
This appears to be the only place that git-p4 actually cares
about the current branch.
Signed-off-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When attempting to add a submodule with backslashes in its name 'git
submodule' fails in a funny way. We can see that some of the
backslashes are expanded resulting in a bogus path:
git -C main submodule add ../sub\\with\\backslash
fatal: repository '/tmp/test/sub\witackslash' does not exist
fatal: clone of '/tmp/test/sub\witackslash' into submodule path
To solve this, convert calls to 'read' to 'read -r' in git-submodule.sh
in order to prevent backslash expantion in submodule names.
Reported-by: Joachim Durchholz <jo@durchholz.org>
Signed-off-by: Brandon Williams <bmwill@google.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
b1ef400e (setup_git_env: avoid blind fall-back to ".git") made programs
that tried to access a repository without initializing properly die with
a diagnostic message. One offender is test-read-cache, which is used in
p0002. Fix it by calling setup_git_directory() before accessing the
index.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As documented in git-receive-pack(1), updating a ref from
within the pre-receive hook is dangerous and can corrupt
your repo. This patch forbids ref updates entirely during
the hook to make it harder for adventurous hook writers to
shoot themselves in the foot.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The last test in 't6500-gc', 'background auto gc does not run if
gc.log is present and recent but does if it is old', added in
a831c06a2 (gc: ignore old gc.log files, 2017-02-10), may sporadically
trigger an error message from the test harness:
rm: cannot remove 'trash directory.t6500-gc/.git/objects': Directory not empty
The test in question ends with executing an auto gc in the backround,
which occasionally takes so long that it's still running when
'test_done' is about to remove the trash directory. This 'rm -rf
$trash' in the foreground might race with the detached auto gc to
create and delete files and directories, and gc might (re-)create a
path that 'rm' already visited and removed, triggering the above error
message when 'rm' attempts to remove its parent directory.
Commit bb05510e5 (t5510: run auto-gc in the foreground, 2016-05-01)
fixed the same problem in a different test script by simply
disallowing background gc. Unfortunately, what worked there is not
applicable here, because the purpose of this test is to check the
behavior of a detached auto gc.
Make sure that the test doesn't continue before the gc is finished in
the background with a clever bit of shell trickery:
- Open fd 9 in the shell, to be inherited by the background gc
process, because our daemonize() only closes the standard fds 0,
1 and 2.
- Duplicate this fd 9 to stdout.
- Read 'git gc's stdout, and thus fd 9, through a command
substitution. We don't actually care about gc's output, but this
construct has two useful properties:
- This read blocks until stdout or fd 9 are open. While stdout is
closed after the main gc process creates the background process
and exits, fd 9 remains open until the backround process exits.
- The variable assignment from the command substitution gets its
exit status from the command executed within the command
substitution, i.e. a failing main gc process will cause the test
to fail.
Note, that this fd trickery doesn't work on Windows, because due to
MSYS limitations the git process only inherits the standard fds 0, 1
and 2 from the shell. Luckily, it doesn't matter in this case,
because on Windows daemonize() is basically a noop, thus 'git gc
--auto' always runs in the foreground.
And since we can now continue the test reliably after the detached gc
finished, check that there is only a single packfile left at the end,
i.e. that the detached gc actually did what it was supposed to do.
Also add a comment at the end of the test script to warn developers of
future tests about this issue of long running detached gc processes.
Helped-by: Jeff King <peff@peff.net>
Helped-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit e9d9a8a4d (connect: handle putty/plink also in
GIT_SSH_COMMAND, 2017-01-02) added a call to
split_cmdline(), but checks only for a non-zero return to
see if we got any output. Since the function returns
negative values (and a NULL argv) on error, we end up
dereferencing NULL and segfaulting.
Arguably we could report on the parsing error here, but it's
probably not worth it. This is a best-effort attempt to see
if we are using plink. So we can simply return here with
"no, it wasn't plink" and let the shell actually complain
about the bogus quoting.
Reported-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add strcmp_offset() function to also return the offset of the
first change.
Add unit test and helper to verify.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use ALLOC_GROW() macro when reallocing a string_list array
rather than simply increasing it by 32. This is a performance
optimization.
During status on a very large repo and there are many changes,
a significant percentage of the total run time is spent
reallocing the wt_status.changes array.
This change decreases the time in wt_status_collect_changes_worktree()
from 125 seconds to 45 seconds on my very large repository.
This produced a modest gain on my 1M file artificial repo, but
broke even on linux.git.
Test HEAD^^ HEAD
---------------------------------------------------------------------------------------
0005.2: read-tree status br_ballast (1000001) 8.29(5.62+2.62) 8.22(5.57+2.63) -0.8%
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach git to skip verification of the SHA1-1 checksum at the end of
the index file in verify_hdr() which is called from read_index()
unless the "force_verify_index_checksum" global variable is set.
Teach fsck to force this verification.
The checksum verification is for detecting disk corruption, and for
small projects, the time it takes to compute SHA-1 is not that
significant, but for gigantic repositories this calculation adds
significant time to every command.
These effect can be seen using t/perf/p0002-read-cache.sh:
Test HEAD~1 HEAD
--------------------------------------------------------------------------------------
0002.1: read_cache/discard_cache 1000 times 0.66(0.44+0.20) 0.30(0.27+0.02) -54.5%
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previous to commit 5d8f084a5 (pathspec: simpler logic to prefix original
pathspec elements, 2017-01-04), we were always using the computed
`match` variable to perform pathspec matching whenever
`PATHSPEC_PREFIX_ORIGIN` is set. This is for example useful when passing
the parsed pathspecs to other commands, as the computed `match` may
contain a pathspec relative to the repository root. The commit changed
this logic to only do so when we do have an actual prefix and when
literal pathspecs are deactivated.
But this change may actually break some commands which expect passed
pathspecs to be relative to the repository root. One such case is `git
add --patch`, which now fails when using relative paths from a
subdirectory. For example if executing "git add -p ../foo.c" in a
subdirectory, the `git-add--interactive` command will directly pass
"../foo.c" to `git-ls-files`. As ls-files is executed at the
repository's root, the command will notice that "../foo.c" is outside
the repository and fail.
Fix the issue by again using the computed `match` variable when
`PATHSPEC_PREFIX_ORIGIN` is set and global literal pathspecs are
deactivated. Note that in contrast to previous behavior, we will now
always call `prefix_magic` regardless of whether a prefix is actually
set. But this is the right thing to do: when the `match` variable has
been resolved to the repository's root, it will be set to an empty
string. When passing the empty string directly to other commands, it
will result in a warning regarding deprecated empty pathspecs. By always
adding the prefix magic, we will end up with at least the string
":(prefix:0)" and thus avoid the warning.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Acked-by: Brandon Williams <bmwill@google.com>
Reviewed-by: Duy Nguyen <pclouds@gmail.com>
$GIT_DIR returned by get_git_dir() is normalized, with all symlinks
resolved (see setup_work_tree function). In order to match paths (or
patterns) against $GIT_DIR char-by-char, they have to be normalized
too. There is a note in config.txt about this, that the user need to
resolve symlinks by themselves if needed.
The problem is, we allow certain path expansion, '~/' and './', for
convenience and can't ask the user to resolve symlinks in these
expansions. Make sure the expanded paths have all symlinks resolved.
PS. The strbuf_realpath(&text, get_git_dir(), 1) is still needed because
get_git_dir() may return relative path.
Noticed-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Whenever a git command is present in the upstream of a pipe, its failure
gets masked by piping. Hence we should avoid it for testing the
upstream git command. By writing out the output of the git command to
a file, we can test the exit codes of both the commands as a failure exit
code in any command is able to stop the && chain.
Signed-off-by: Prathamesh Chavan <pc44800@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The left and right base directories were pointed to the buf field of
two strbufs, which were subject to change.
A contrived test case shows the problem where a file with a long enough
name to force the strbuf to grow is up-to-date (hence the code path is
used where the work tree's version of the file is reused), and then a
file that is not up-to-date needs to be written (hence the code path is
used where checkout_entry() uses the previously recorded base_dir that
is invalid by now).
Let's just copy the base_dir strings for use with checkout_entry(),
never touch them until the end, and release them then. This is an easily
verifiable fix (as opposed to the next-obvious alternative: to re-set
base_dir after every loop iteration).
This fixes https://github.com/git-for-windows/git/issues/1124
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The instructions how to normalize the line endings should have been updated
as part of commit 6523728499 'convert: unify the "auto" handling of CRLF',
(but that part never made it into the commit).
Update the documentation in Documentation/gitattributes.txt and add
a test case in t0025.
Reported by Kristian Adrup
https://github.com/git-for-windows/git/issues/954
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The lazy-init codepath will not be exercised uniless threaded. Skip
the entire test on a single-core box. Also replace a hard-coded
constant of 2000 (number of cache entries to manifacture for tests)
with a variable with a human readable name.
Signed-off-by: Kevin Willford <kewillf@microsoft.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Created helper executable to print the value of online_cpus()
allowing multi-threaded tests to be skipped when appropriate.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
An empty line should stop any pending in-body headers, and start the
actual body parsing.
This also modifies the original test for the in-body headers to actually
have a real commit body that starts with spaces, and changes the test to
check that the long line matches _exactly_, and doesn't get extra data
from the body.
Fixes:6b4b013f1884 ("mailinfo: handle in-body header continuations")
Cc: Jonathan Tan <jonathantanmy@google.com>
Cc: Jeff King <peff@peff.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach "push --recurse-submodules" to propagate, if given a name as remote, the
provided remote and refspec recursively to the pushes performed in the
submodules. The push will therefore only succeed if all submodules have a
remote with such a name configured.
Note that "push --recurse-submodules" with a path or URL as remote will not
propagate the remote or refspec and instead use the default remote and refspec
configured in the submodule, preserving the current behavior.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach push --recurse-submodules to propagate push-options recursively to
the pushes performed in the submodules.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The default behaviour of "git log" in an interactive session has
been changed to enable "--decorate".
* ah/log-decorate-default-to-auto:
log: if --decorate is not given, default to --decorate=auto
"git tag/branch/for-each-ref" family of commands long allowed to
filter the refs by "--contains X" (show only the refs that are
descendants of X), "--merged X" (show only the refs that are
ancestors of X), "--no-merged X" (show only the refs that are not
ancestors of X). One curious omission, "--no-contains X" (show
only the refs that are not descendants of X) has been added to
them.
* ab/ref-filter-no-contains:
tag: add tests for --with and --without
ref-filter: reflow recently changed branch/tag/for-each-ref docs
ref-filter: add --no-contains option to tag/branch/for-each-ref
tag: change --point-at to default to HEAD
tag: implicitly supply --list given another list-like option
tag: change misleading --list <pattern> documentation
parse-options: add OPT_NONEG to the "contains" option
tag: add more incompatibles mode tests
for-each-ref: partly change <object> to <commit> in help
tag tests: fix a typo in a test description
tag: remove a TODO item from the test suite
ref-filter: add test for --contains on a non-commit
ref-filter: make combining --merged & --no-merged an error
tag doc: reword --[no-]merged to talk about commits, not tips
tag doc: split up the --[no-]merged documentation
tag doc: move the description of --[no-]merged earlier
David reported:
> When I try to run `git diff --submodule=diff` in a submodule which has
> it's own submodules that have changes I get the error: fatal: bad
> object.
This happens, because we do not properly initialize the environment
in which the diff is run in the submodule. That means we inherit the
environment from the main process, which sets environment variables.
(Apparently we do set environment variables which we do not set
when not in a submodules, i.e. the .git directory is linked)
This commit, just like fd47ae6a5b (diff: teach diff to display
submodule difference with an inline diff, 2016-08-31) introduces bad
test code (i.e. hard coded hash values), which will be cleanup up in
a later patch.
Reported-by: David Parrish <daveparrish@gmail.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we notice that we have a local copy of an incoming
object, we compare the two objects to make sure we haven't
found a collision. Before we get to the actual object
bytes, though, we compare the type and size from
sha1_object_info().
If our local object is corrupted, then the type will be
OBJ_BAD, which obviously will not match the incoming type,
and we'll report "SHA1 COLLISION FOUND" (with capital
letters and everything). This is confusing, as the problem
is not a collision but rather local corruption. We should
report that instead (just like we do if reading the rest of
the object content fails a few lines later).
Note that we _could_ just ignore the error and mark it as a
non-collision. That would let you "git fetch" to replace a
corrupted object. But it's not a very reliable method for
repairing a repository. The earlier want/have negotiation
tries to get the other side to omit objects we already have,
and it would not realize that we are "missing" this
corrupted object. So we're better off complaining loudly
when we see corruption, and letting the user take more
drastic measures to repair (like making a full clone
elsewhere and copying the pack into place).
Note that the test sets transfer.unpackLimit in the
receiving repository so that we use index-pack (which is
what does the collision check). Normally for such a small
push we'd use unpack-objects, which would simply try to
write the loose object, and discard the new one when we see
that there's already an old one.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When sha1_loose_object_info() finds that a loose object file
cannot be stat(2)ed or mmap(2)ed, it returns -1 to signal an
error to the caller. However, if it found that the loose
object file is corrupt and the object data cannot be used
from it, it stuffs OBJ_BAD into "type" field of the
object_info, but returns zero (i.e., success), which can
confuse callers.
This is due to 052fe5eac (sha1_loose_object_info: make type
lookup optional, 2013-07-12), which switched the return to a
strict success/error, rather than returning the type (but
botched the return).
Callers of regular sha1_object_info() don't notice the
difference, as that function returns the type (which is
OBJ_BAD in this case). However, direct callers of
sha1_object_info_extended() see the function return success,
but without setting any meaningful values in the object_info
struct, leading them to access potentially uninitialized
memory.
The easiest way to see the bug is via "cat-file -s", which
will happily ignore the corruption and report whatever
value happened to be in the "size" variable.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add check for the end of the entries for the thread partition.
Add test for lazy init name hash with specific directory structure
The lazy init hash name was causing a buffer overflow when the last
entry in the index was multiple folder deep with parent folders that
did not have any files in them.
This adds a test for the boundary condition of the thread partitions
with the folder structure that was triggering the buffer overflow.
The fix was to check if it is the last entry for the thread partition
in the handle_range_dir and not try to use the next entry in the cache.
Signed-off-by: Kevin Willford <kewillf@microsoft.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since this structure handles an array of object IDs, rename it to struct
oid_array. Also rename the accessor functions and the initialization
constant.
This commit was produced mechanically by providing non-Documentation
files to the following Perl one-liners:
perl -pi -E 's/struct sha1_array/struct oid_array/g'
perl -pi -E 's/\bsha1_array_/oid_array_/g'
perl -pi -E 's/SHA1_ARRAY_INIT/OID_ARRAY_INIT/g'
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make sha1_array_for_each_unique take a callback using struct object_id.
Since one of these callbacks is an argument to for_each_abbrev, convert
those as well. Rename various functions, replacing "sha1" with "oid".
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert this function by changing the declaration and definition and
applying the following semantic patch to update the callers:
@@
expression E1, E2;
@@
- sha1_array_lookup(E1, E2.hash)
+ sha1_array_lookup(E1, &E2)
@@
expression E1, E2;
@@
- sha1_array_lookup(E1, E2->hash)
+ sha1_array_lookup(E1, E2)
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert the callers to pass struct object_id by changing the function
declaration and definition and applying the following semantic patch:
@@
expression E1, E2;
@@
- sha1_array_append(E1, E2.hash)
+ sha1_array_append(E1, &E2)
@@
expression E1, E2;
@@
- sha1_array_append(E1, E2->hash)
+ sha1_array_append(E1, E2)
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A recent update to "rebase -i" stopped running hooks for the "git
commit" command during "reword" action, which has been fixed.
* js/rebase-i-reword-to-run-hooks:
sequencer: allow the commit-msg hooks to run during a `reword`
sequencer: make commit options more extensible
t7504: document regression: reword no longer calls commit-msg
On many keyboards, typing "@{" involves holding down SHIFT key and
one can easily end up with "@{Up..." when typing "@{upstream}". As
the upstream/push keywords do not appear anywhere else in the syntax,
we can safely accept them case insensitively without introducing
ambiguity or confusion to solve this.
* ab/case-insensitive-upstream-and-push-marker:
rev-parse: match @{upstream}, @{u} and @{push} case-insensitively
Doc updates.
* ab/test-readme-updates:
t/README: clarify the test_have_prereq documentation
t/README: change "Inside <X> part" to "Inside the <X> part"
t/README: link to metacpan.org, not search.cpan.org
FreeBSD implementation of getcwd(3) behaved differently when an
intermediate directory is unreadable/unsearchable depending on the
length of the buffer provided, which our strbuf_getcwd() was not
aware of. strbuf_getcwd() has been taught to cope with it better.
* rs/freebsd-getcwd-workaround:
strbuf: support long paths w/o read rights in strbuf_getcwd() on FreeBSD
A few commands that recently learned the "--recurse-submodule"
option misbehaved when started from a subdirectory of the
superproject.
* bw/recurse-submodules-relative-fix:
ls-files: fix bug when recursing with relative pathspec
ls-files: fix typo in variable name
grep: fix bug when recursing with relative pathspec
setup: allow for prefix to be passed to git commands
grep: fix help text typo
The refs completion for large number of refs has been sped up,
partly by giving up disambiguating ambiguous refs and partly by
eliminating most of the shell processing between 'git for-each-ref'
and 'ls-remote' and Bash's completion facility.
* sg/completion-refs-speedup:
completion: speed up branch and tag completion
completion: fill COMPREPLY directly when completing fetch refspecs
completion: fill COMPREPLY directly when completing refs
completion: let 'for-each-ref' sort remote branches for 'checkout' DWIMery
completion: let 'for-each-ref' filter remote branches for 'checkout' DWIMery
completion: let 'for-each-ref' strip the remote name from remote branches
completion: let 'for-each-ref' and 'ls-remote' filter matching refs
completion: don't disambiguate short refs
completion: don't disambiguate tags and branches
completion: support excluding full refs
completion: support completing fully qualified non-fast-forward refspecs
completion: support completing full refs after '--option=refs/<TAB>'
completion: wrap __git_refs() for better option parsing
completion: remove redundant __gitcomp_nl() options from _git_commit()
"what URL do we want to update this submodule?" and "are we
interested in this submodule?" are split into two distinct
concepts, and then the way used to express the latter got extended,
paving a way to make it easier to manage a project with many
submodules and make it possible to later extend use of multiple
worktrees for a project with submodules.
* bw/submodule-is-active:
submodule add: respect submodule.active and submodule.<name>.active
submodule--helper init: set submodule.<name>.active
clone: teach --recurse-submodules to optionally take a pathspec
submodule init: initialize active submodules
submodule: decouple url and submodule interest
submodule--helper clone: check for configured submodules using helper
submodule sync: use submodule--helper is-active
submodule sync: skip work for inactive submodules
submodule status: use submodule--helper is-active
submodule--helper: add is-active subcommand
Suppose I have a superproject 'super', with two submodules 'super/sub'
and 'super/sub1'. 'super/sub' itself contains a submodule
'super/sub/subsub'. Now suppose I run, from within 'super':
echo hi >sub/subsub/stray-file
echo hi >sub1/stray-file
Currently we get would see the following output in git-status:
git status --short
m sub
? sub1
With this patch applied, the untracked file in the nested submodule is
displayed as an untracked file on the 'super' level as well.
git status --short
? sub
? sub1
This doesn't change the output of 'git status --porcelain=1' for nested
submodules, because its output is always ' M' for either untracked files
or local modifications no matter the nesting level of the submodule.
'git status --porcelain=2' is affected by this change in a nested
submodule, though. Without this patch it would report the direct submodule
as modified and having no untracked files. With this patch it would report
untracked files. Chalk this up as a bug fix.
This bug fix also affects the default output (non-short, non-porcelain)
of git-status, which is not tested here.
Signed-off-by: Stefan Beller <sbeller@google.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If I add an untracked file to a submodule or modify a tracked file,
currently "git status --short" treats the change in the same way as
changes to the current HEAD of the submodule:
$ git clone --quiet --recurse-submodules https://gerrit.googlesource.com/gerrit
$ echo hello >gerrit/plugins/replication/stray-file
$ sed -i -e 's/.*//' gerrit/plugins/replication/.mailmap
$ git -C gerrit status --short
M plugins/replication
This is by analogy with ordinary files, where "M" represents a change
that has not been added yet to the index. But this change cannot be
added to the index without entering the submodule, "git add"-ing it,
and running "git commit", so the analogy is counterproductive.
Introduce new status letters " ?" and " m" for this. These are similar
to the existing "??" and " M" but mean that the submodule (not the
parent project) has new untracked files and modified files, respectively.
The user can use "git add" and "git commit" from within the submodule to
add them.
Changes to the submodule's HEAD commit can be recorded in the index with
a plain "git add -u" and are shown with " M", like today.
To avoid excessive clutter, show at most one of " ?", " m", and " M" for
the submodule. They represent increasing levels of change --- the last
one that applies is shown (e.g., " m" if there are both modified files
and untracked files in the submodule, or " M" if the submodule's HEAD
has been modified and it has untracked files).
While making these changes, we need to make sure to not break porcelain
level 1, which shares code with "status --short". We only change
"git status --short".
Non-short "git status" and "git status --porcelain=2" already handle
these cases by showing more detail:
$ git -C gerrit status --porcelain=2
1 .M S.MU 160000 160000 160000 305c864db28eb0c77c8499bc04c87de3f849cf3c 305c864db28eb0c77c8499bc04c87de3f849cf3c plugins/replication
$ git -C gerrit status
[...]
modified: plugins/replication (modified content, untracked content)
Scripts caring about these distinctions should use --porcelain=2.
Helped-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git name-rev" assigned a phony "far in the future" date to tips of
refs that are not pointing at tag objects, and favored names based
on a ref with the oldest date. This made it almost impossible for
an unannotated tags and branches to be counted as a viable base,
which was especially problematic when the command is run with the
"--tags" option. If an unannotated tag that points at an ancient
commit and an annotated tag that points at a much newer commit
reaches the commit that is being named, the old unannotated tag was
ignored.
Update the "taggerdate" field of the rev-name structure, which is
initialized from the tip of ref, to have the committer date if the
object at the tip of ref is a commit, not a tag, so that we can
optionally take it into account when doing "is this name better?"
comparison logic.
When "name-rev" is run without the "--tags" option, the general
expectation is still to name the commit based on a tag if possible,
but use non-tag refs as fallback, and tiebreak among these non-tag
refs by favoring names with shorter hops from the tip. The use of a
phony "far in the future" date in the original code was an effective
way to ensure this expectation is held: a non-tag tip gets the same
"far in the future" timestamp, giving precedence to tags, and among
non-tag tips, names with shorter hops are preferred over longer
hops, without taking the "taggerdate" into account. As we are
taking over the "taggerdate" field to store the committer date for
tips with commits:
(1) keep the original logic when comparing names based on two refs
both of which are from refs/tags/;
(2) favoring a name based on a ref in refs/tags/ hierarchy over
a ref outside the hierarchy;
(3) between two names based on a ref both outside refs/tags/, give
precedence to a name with shorter hops and use "taggerdate"
only to tie-break.
A change to t4202 is a natural consequence. The test creates a
commit on a branch "side" and points at it with an unannotated tag
"refs/tags/side-2". The original code couldn't decide which one to
favor at all, and gave a name based on a branch (simply because
refs/heads/side sorts earlier than refs/tags/side-2). Because the
updated logic is taught to favor refs in refs/tags/ hierarchy, the
the test is updated to expect to see tags/side-2 instead.
[mjg: open-coded the comparisons in is_better_name(), dropping a
helper macro used in the original]
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Michael J Gruber <git@grubix.eu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The name-hash used for detecting paths that are different only in
cases (which matter on case insensitive filesystems) has been
optimized to take advantage of multi-threading when it makes sense.
* jh/memihash-opt:
name-hash: add test-lazy-init-name-hash to .gitignore
name-hash: add perf test for lazy_init_name_hash
name-hash: add test-lazy-init-name-hash
name-hash: perf improvement for lazy_init_name_hash
hashmap: document memihash_cont, hashmap_disallow_rehash api
hashmap: add disallow_rehash setting
hashmap: allow memihash computation to be continued
name-hash: specify initial size for istate.dir_hash table
Recent enhancement to "git stash push" command to support pathspec
to allow only a subset of working tree changes to be stashed away
was found to be too chatty and exposed the internal implementation
detail (e.g. when it uses reset to match the index to HEAD before
doing other things, output from reset seeped out). These, and
other chattyness has been fixed.
* tg/stash-push-fixup:
stash: keep untracked files intact in stash -k
stash: pass the pathspec argument to git reset
stash: don't show internal implementation details
"git checkout" is taught the "--recurse-submodules" option.
* sb/checkout-recurse-submodules:
builtin/read-tree: add --recurse-submodules switch
builtin/checkout: add --recurse-submodules switch
entry.c: create submodules when interesting
unpack-trees: check if we can perform the operation for submodules
unpack-trees: pass old oid to verify_clean_submodule
update submodules: add submodule_move_head
submodule.c: get_super_prefix_or_empty
update submodules: move up prepare_submodule_repo_env
submodules: introduce check to see whether to touch a submodule
update submodules: add a config option to determine if submodules are updated
update submodules: add submodule config parsing
make is_submodule_populated gently
lib-submodule-update.sh: define tests for recursing into submodules
lib-submodule-update.sh: replace sha1 by hash
lib-submodule-update: teach test_submodule_content the -C <dir> flag
lib-submodule-update.sh: do not use ./. as submodule remote
lib-submodule-update.sh: reorder create_lib_submodule_repo
submodule--helper.c: remove duplicate code
connect_work_tree_and_git_dir: safely create leading directories