* cr/tag-options:
git-tag: test that -s implies an annotated tag
"git-tag -s" should create a signed annotated tag
builtin-tag: accept and process multiple -m just like git-commit
Make builtin-tag.c use parse_options.
* maint:
Replace the word 'update-cache' by 'update-index' everywhere
cvsimport: fix usage of cvsimport.module
t7003-filter-branch: Fix test of a failing --msg-filter.
cvsimport: miscellaneous packed-ref fixes
cvsimport: use rev-parse to support packed refs
Add basic cvsimport tests
Earlier, 'git prune' would prune all loose unreachable objects.
This could be quite dangerous, as the objects could be used in
an ongoing operation.
This patch adds a mode to expire only loose, unreachable objects
which are older than a certain time. For example, by
git prune --expire 14.days
you can prune only those objects which are loose, unreachable
and older than 14 days (and thus probably outdated).
The implementation uses st.st_mtime rather than st.st_ctime,
because it can be tested better, using 'touch -d <time>' (and
omitting the test when the platform does not support that
command line switch).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There were two problems:
1. We only look at the config variable if there is no module
given on the command line. We checked this by comparing
@ARGV == 0. However, at the time of the comparison, we
have not yet parsed the dashed options, meaning that
"git cvsimport" would read the variable but "git
cvsimport -a" would not. This is fixed by simply moving
the check after the call to getopt.
2. If the config variable did not exist, we were adding an
empty string to @ARGV. The rest of the script, rather
than barfing for insufficient input, would then try to
import the module '', leading to rather confusing error
messages. Based on patch from Emanuele Giaquinta.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Occasionally, in some setups (*cough* forks on repo.or.cz *cough*) some
refs go stale, e.g. when the forkee rebased and lost some objects needed
by the fork. The quick & dirty way to deal with those refs is to delete
them and push them again.
However, git-push first would first fetch the current commit name for the
ref, would receive a null sha1 since the ref does not point to a valid
object, then tell receive-pack that it should delete the ref with this
commit name. delete_ref() would be subsequently be called, and check that
resolve_ref() (which does _not_ check for validity of the object) returns
the same commit name. Which would fail.
The proper fix is to avoid corrupting repositories, but in the meantime
this is a good fix in any case.
Incidentally, some instances of "cd .." in the test cases were fixed, so
that subsequent test cases run in t/trash/ irrespective of the outcome of
the previous test cases.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test passed for the wrong reason: If the script given to --msg-filter
fails, it is expected that git-filter-branch aborts. But the test forgot
to tell the branch name to rewrite, and so git-filter-branch failed due to
incorrect usage.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When calling 'git pull' with the '--rebase' option, it performs a
fetch + rebase instead of a fetch + merge.
This behavior is more desirable than fetch + pull when a topic branch
is ready to be submitted and needs to be update.
fetch + rebase might also be considered a better workflow with shared
repositories in any case, or for contributors to a centrally managed
repository, such as WINE's.
As a convenience, you can set the default behavior for a branch by
defining the config variable branch.<name>.rebase, which is
interpreted as a bool. This setting can be overridden on the command
line by --rebase and --no-rebase.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This reverts commit 09fba7a59d.
These tests are superseded by the ones in t5404 (added in
6fa92bf3 and 8736a848), which are more extensive and better
organized.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, if refs were packed, git-cvsimport would assume
that particular refs did not exist. This could lead to, for
example, overwriting previous 'origin' commits that were
packed.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We weren't even testing basic things before, so let's at
least try importing and updating a trivial repository, which
will catch total breakage.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This detects a regression introduced while moving git-tag to a C
builtin.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/maint-add-sync-stat:
t2200: test more cases of "add -u"
git-add: make the entry stat-clean after re-adding the same contents
ce_match_stat, run_diff_files: use symbolic constants for readability
* jc/maint-format-patch-encoding:
test format-patch -s: make sure MIME content type is shown as needed
format-patch -s: add MIME encoding header if signer's name requires so
* bs/maint-commit-options:
git-commit: Add tests for invalid usage of -a/--interactive with paths
git-commit.sh: Fix usage checks regarding paths given when they do not make sense
We earlier introduced core.whitespace to allow users to tweak the
definition of what the "whitespace errors" are, for the purpose of diff
output highlighting. This teaches the same to git-apply, so that the
command can both detect (when --whitespace=warn option is given) and fix
(when --whitespace=fix option is given) as configured.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jk/send-pack: (24 commits)
send-pack: cluster ref status reporting
send-pack: fix "everything up-to-date" message
send-pack: tighten remote error reporting
make "find_ref_by_name" a public function
Fix warning about bitfield in struct ref
send-pack: assign remote errors to each ref
send-pack: check ref->status before updating tracking refs
send-pack: track errors for each ref
git-push: add documentation for the newly added --mirror mode
Add tests for git push'es mirror mode
Update the tracking references only if they were succesfully updated on remote
Add a test checking if send-pack updated local tracking branches correctly
git-push: plumb in --mirror mode
Teach send-pack a mirror mode
send-pack: segfault fix on forced push
Reteach builtin-ls-remote to understand remotes
send-pack: require --verbose to show update of tracking refs
receive-pack: don't mention successful updates
more terse push output
Build in ls-remote
...
* js/mingw-fallouts:
fetch-pack: Prepare for a side-band demultiplexer in a thread.
rehabilitate some t5302 tests on 32-bit off_t machines
Allow ETC_GITCONFIG to be a relative path.
Introduce git_etc_gitconfig() that encapsulates access of ETC_GITCONFIG.
Allow a relative builtin template directory.
Close files opened by lock_file() before unlinking.
builtin run_command: do not exit with -1.
Move #include <sys/select.h> and <sys/ioctl.h> to git-compat-util.h.
Use is_absolute_path() in sha1_file.c.
Skip t3902-quoted.sh if the file system does not support funny names.
t5302-pack-index: Skip tests of 64-bit offsets if necessary.
t7501-commit.sh: Not all seds understand option -i
t5300-pack-object.sh: Split the big verify-pack test into smaller parts.
* cc/bisect:
Bisect reset: do nothing when not bisecting.
Bisect: use "$GIT_DIR/BISECT_NAMES" to check if we are bisecting.
Bisect visualize: use "for-each-ref" to list all good refs.
git-bisect: modernize branch shuffling hack
git-bisect: use update-ref to mark good/bad commits
git-bisect: war on "sed"
Bisect reset: remove bisect refs that may have been packed.
We no longer have "runstatus", but running "status" is no longer that
expensive anyway; it is a builtin.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The rule is this: if the last line already contains the sign off by the
current committer, do nothing. If it contains another sign off, just
add the sign off of the current committer. If the last line does not
contain a sign off, add a new line before adding the sign off.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Signed-off-by: line contained a spurious timestamp. The reason was
a call to git_committer_info(1), which automatically added the
timestamp.
Instead, fmt_ident() was taught to interpret an empty string for the
date (as opposed to NULL, which still triggers the default behavior)
as "do not bother with the timestamp", and builtin-commit.c uses it.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To show the relative paths, the function formerly called quote_crlf()
(now called quote_path()) takes the prefix as an additional argument.
While at it, the static buffers were replaced by strbufs.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
[PATCH] rebase -i: move help to end of todo file
Many editors start in the first line, so the 9-line help text was an
annoyance. So move it to the end.
Requested by Junio.
While at it, add a hint how to abort the rebase.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When creating a bundle, symbolic refs used to be resolved to the
non-symbolic refs they point to before being written to the list
of contained refs. I.e. "git bundle create a1.bundle HEAD master"
would show something like
388afe7881b33102fada216dd07806728773c011 refs/heads/master
388afe7881b33102fada216dd07806728773c011 refs/heads/master
instead of
388afe7881b33102fada216dd07806728773c011 HEAD
388afe7881b33102fada216dd07806728773c011 refs/heads/master
Introduce a special handling so that the symbolic refs are listed
with the names passed on the command line.
Noticed by Santi Béjar.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* git://git.bogomips.org/git-svn:
git-svn: allow `info' command to work offline
git-svn: info --url [path]
git-svn info: implement info command
git-svn: extract reusable code into utility functions
t9106: fix a race condition that caused svn to miss modifications
663af3422a (Full rework of
quote_c_style and write_name_quoted.) mistakenly used puts()
when writing out a fixed string when it did not want to add a
terminating LF.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Return the svn URL for the given path, or return the svn
repository URL if no path is given.
Added 18 tests to t/t9119-git-svn-info.sh.
Signed-off-by: David D. Kilzer <ddkilzer@kilzer.net>
Acked-by: Eric Wong <normalperson@yhbt.net>
Implement "git-svn info" for files and directories based on the
"svn info" command. Note that the -r/--revision argument is not
supported yet.
Added 18 tests in t/t9119-git-svn-info.sh.
[ew: small fix to work without arguments on all working directories]
Signed-off-by: David D. Kilzer <ddkilzer@kilzer.net>
Acked-by: Eric Wong <normalperson@yhbt.net>
Before this patch, using "git bisect reset" when not bisecting
did a "git checkout master" for no good reason.
This also happened using "git bisect replay" when not bisecting
because "bisect_replay" starts by calling "bisect_reset".
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As a git newbie, it was confusing to set an In-Reply-To header but then
not see it printed when the git-send-email command was run.
This patch prints all headers that would be sent to sendmail or an SMTP
server instead of only printing From, Subject, Cc, To. It also removes
the now-extraneous Date header after the "Log says" line.
Added test to t/t9001-send-email.sh.
Signed-off-by: David D. Kilzer <ddkilzer@kilzer.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Also, this removes those tests ensuring that repeated
-m options don't allocate memory more than once, because now
this is done after parsing options, using the last one
when more are given. The same for -F.
Signed-off-by: Carlos Rica <jasampler@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The old rules used by fetch were coded as a series of ifs. The old
rules are:
1) match full refname if it starts with "refs/" or matches "HEAD"
2) verify that full refname starts with "refs/"
3) match abbreviated name in "refs/" if it starts with "heads/",
"tags/", or "remotes/".
4) match abbreviated name in "refs/heads/"
This is replaced by the new rules
a) match full refname
b) match abbreviated name prefixed with "refs/"
c) match abbreviated name prefixed with "refs/heads/"
The details of the new rules are different from the old rules. We no
longer verify that the full refname starts with "refs/". The new rule
(a) matches any full string. The old rules (1) and (2) were stricter.
Now, the caller is responsible for using sensible full refnames. This
should be the case for the current code. The new rule (b) is less
strict than old rule (3). The new rule accepts abbreviated names that
start with a non-standard prefix below "refs/".
Despite this modifications the new rules should handle all cases as
expected. Two tests are added to verify that fetch does not resolve
short tags or HEAD in remotes.
We may even think about loosening the rules a bit more and unify them
with the rev-parse rules. This would be done by replacing
ref_ref_fetch_rules with ref_ref_parse_rules. Note, the two new test
would break.
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit changes the rules for resolving refspecs to match the
rules for resolving refs in rev-parse. git-rev-parse uses clear rules
to resolve a short ref to its full name, which are well documented.
The rules for resolving refspecs documented in git-send-pack were
less strict and harder to understand. This commit replaces them by
the rules of git-rev-parse.
The unified rules are easier to understand and better resolve ambiguous
cases. You can now push from a repository containing several branches
ending on the same short name.
Note, this may break existing setups. For example, "master" will no longer
resolve to "origin/master" even when there is no other "master" elsewhere.
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This teaches "push <remote> HEAD" to resolve HEAD on the local
side to its real branch name, e.g. master, and then act as if
the real branch name was specified. So we have a shorthand for
pushing the current branch. Besides HEAD, no other symbolic ref
is resolved.
Thanks to Daniel Barkalow <barkalow@iabervon.org> for suggesting
this implementation, which is much simpler than the
implementation proposed before.
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* git://git.bogomips.org/git-svn:
git-svn: Fix a typo and add a comma in an error message in git-svn
git-svn log: handle unreachable revisions like "svn log"
git-svn log: include commit log for the smallest revision in a range
git-svn log: fix ascending revision ranges
git-svn's dcommit must use subversion's config
git-svn: add tests for command-line usage of init and clone commands
When unreachable revisions are given to "svn log", it displays all commit
logs in the given range that exist in the current tree. (If no commit
logs are found in the current tree, it simply prints a single commit log
separator.) This patch makes "git-svn log" behave the same way.
Ten tests added to t/t9116-git-svn-log.sh.
Signed-off-by: David D Kilzer <ddkilzer@kilzer.net>
Acked-by: Eric Wong <normalperson@yhbt.net>
The "svn log -rM:N" command shows commit logs inclusive in the range [M,N].
Previously "git-svn log" always excluded the commit log for the smallest
revision in a range, whether the range was ascending or descending. With
this patch, the smallest revision in a range is always shown.
Updated tests for ascending and descending revision ranges.
Signed-off-by: David D Kilzer <ddkilzer@kilzer.net>
Acked-by: Eric Wong <normalperson@yhbt.net>
Fixed typo in Git::SVN::Log::git_svn_log_cmd(). Previously a command like
"git-svn log -r1:4" would only show a commit log separator.
Added tests for ascending and descending revision ranges.
Signed-off-by: David D Kilzer <ddkilzer@kilzer.net>
Acked-by: Eric Wong <normalperson@yhbt.net>
This lets us show remote errors (e.g., a denied hook) along
with the usual push output.
There is a slightly clever optimization in receive_status
that bears explanation. We need to correlate the returned
status and our ref objects, which naively could be an O(m*n)
operation. However, since the current implementation of
receive-pack returns the errors to us in the same order that
we sent them, we optimistically look for the next ref to be
looked up to come after the last one we have found. So it
should be an O(m+n) merge if the receive-pack behavior
holds, but we fall back to a correct but slower behavior if
it should change.
Signed-off-by: Jeff King <peff@peff.net>
Acked-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, we manually checked the 'NONE' and 'UPTODATE'
conditions. Now that we have ref->status, we can easily
say "only update if we pushed successfully".
This adds a test for and fixes a regression introduced in
ed31df31 where deleted refs did not have their tracking
branches removed. This was due to a bogus per-ref error test
that is superseded by the more accurate ref->status flag.
Signed-off-by: Jeff King <peff@peff.net>
Completely-Acked-By: Alex "Sleepy" Riesen <raa.lkml@gmail.com>
Acked-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of keeping the 'ret' variable, we instead have a
status flag for each ref that tracks what happened to it.
We then print the ref status after all of the refs have
been examined.
This paves the way for three improvements:
- updating tracking refs only for non-error refs
- incorporating remote rejection into the printed status
- printing errors in a different order than we processed
(e.g., consolidating non-ff errors near the end with
a special message)
Signed-off-by: Jeff King <peff@peff.net>
Acked-by: Alex Riesen <raa.lkml@gmail.com>
Acked-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Brown paper bag fix to avoid using non portable sed syntax. The
test by itself didn't catch what it was supposed to, anyways.
The new test first checks if git-tag correctly errors out when
the user exited the editor without editing the file. Then it
checks if what the user was presented in the editor was any
useful, which we define as the following:
* It begins with a single blank line, where the invoked editor
would typically place the editing curser at, so that the user
can immediately start typing;
* It has some instruction but that comes after that initial
blank line, all lines prefixed with "#". We specifically do
not check for the wording of this instruction.
* And it has nothing else, as the expected behaviour is "Hey
you did not leave any message".
Signed-off-by: Mike Hommey <mh@glandium.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function mark_tree_uninteresting() assumed that the tree entries
are blob when they are not trees. This is not so. Since we do
not traverse into submodules (yet), the gitlinks should be ignored.
In general, we should try to start moving away from using the
"S_ISLNK()" like things for internal git state. It was a mistake to
just assume the numbers all were same across all systems in the first
place. This implementation converts to the "object_type", and then
uses a case statement.
Noticed by Ilari on IRC.
Test script taken from an earlier version by Dscho.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In "dir_struct", each exclusion element in the exclusion stack records a
base string (pointer to the beginning with length) so that we can tell
where it came from, but this pointer is just pointing at the parameter
that is given by the caller to the push_exclude_per_directory()
function.
While read_directory_recursive() runs, calls to excluded() makes use
the data in the exclusion elements, including this base string. The
caller of read_directory_recursive() is not supposed to free the
buffer it gave to push_exclude_per_directory() earlier, until it
returns.
The test case Bruce Stephens gave in the mailing list discussion
was simplified and added to the t3700 test.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a user has an "auto-prop" in his/her ~/.subversion/config file for
automatically setting the svn:keyword Id property on all ".c" files
(a reasonably common configuration in the Subversion world) then one
of the "svn propset" operations in the very first test would become a
no-op, which in turn would make the next commit a no-op.
This then caused the 25th test ('test propget') to fail because it
expects a certain number of commits to have taken place but the actual
number of commits was off by one.
Björn Steinbrink identified the "auto-prop" feature as the cause
of the failure. This patch avoids it by passing the "--no-auto-prop"
flag to "svn import" when setting up the test repository, thus ensuring
that the "svn propset" operation is no longer a no-op, regardless of the
users' settings in their config.
Signed-off-by: Wincent Colaiuta <win@wincent.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If refs were ever packed in the middle of bisection, the bisect
refs were not removed from the "packed-refs" file.
This patch fixes this problem by using "git update-ref -d $ref $hash"
in "bisect_clean_state".
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In "dir_struct", each exclusion element in the exclusion stack records a
base string (pointer to the beginning with length) so that we can tell
where it came from, but this pointer is just pointing at the parameter
that is given by the caller to the push_exclude_per_directory()
function.
While read_directory_recursive() runs, calls to excluded() makes use
the data in the exclusion elements, including this base string. The
caller of read_directory_recursive() is not supposed to free the
buffer it gave to push_exclude_per_directory() earlier, until it
returns.
The test case Bruce Stephens gave in the mailing list discussion
was simplified and added to the t3700 test.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 8ed2fca458 was a bit draconian in
skipping certain tests which should be perfectly valid even on platform
with a 32-bit off_t.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are platforms where off_t is not 64 bits wide. In this case many tests
are doomed to fail. Let's skip them.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This makes it easier to spot which of the tests failed.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* sp/fetch-fix:
git-fetch: avoid local fetching from alternate (again)
rev-list: Introduce --quiet to avoid /dev/null redirects
run-command: Support sending stderr to /dev/null
git-fetch: Always fetch tags if the object they reference exists
* bs/maint-commit-options:
git-commit: Add tests for invalid usage of -a/--interactive with paths
git-commit.sh: Fix usage checks regarding paths given when they do not make sense
* jc/maint-add-sync-stat:
t2200: test more cases of "add -u"
git-add: make the entry stat-clean after re-adding the same contents
ce_match_stat, run_diff_files: use symbolic constants for readability
Conflicts:
builtin-add.c
* bg/format-patch-N:
Rearrange git-format-patch synopsis to improve clarity.
format-patch: Test --[no-]numbered and format.numbered
format-patch: Add configuration and off switch for --numbered
The function mark_tree_uninteresting() assumed that the tree entries
are blob when they are not trees. This is not so. Since we do
not traverse into submodules (yet), the gitlinks should be ignored.
In general, we should try to start moving away from using the
"S_ISLNK()" like things for internal git state. It was a mistake to
just assume the numbers all were same across all systems in the first
place. This implementation converts to the "object_type", and then
uses a case statement.
Noticed by Ilari on IRC.
Test script taken from an earlier version by Dscho.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
git-clean: honor core.excludesfile
Documentation: Fix man page breakage with DocBook XSL v1.72
git-remote.txt: fix typo
core-tutorial.txt: Fix argument mistake in an example.
replace reference to git-rm with git-reset in git-commit doc
Grammar fixes for gitattributes documentation
Don't allow fast-import tree delta chains to exceed maximum depth
revert/cherry-pick: allow starting from dirty work tree.
t/t3404: fix test for a bogus todo file.
Conflicts:
fast-import.c
* ar/send-pack-remote-track:
Update the tracking references only if they were succesfully updated on remote
Add a test checking if send-pack updated local tracking branches correctly
* db/remote-builtin:
Reteach builtin-ls-remote to understand remotes
Build in ls-remote
Use built-in send-pack.
Build-in send-pack, with an API for other programs to call.
Build-in peek-remote, using transport infrastructure.
Miscellaneous const changes and utilities
Conflicts:
transport.c
git-clean did not honor core.excludesfile configuration
variable, although some other commands such as git-add and
git-status did. Fix this inconsistency.
Original report and patch from Shun'ichi Fuji. Rewritten by me
and bugs and tests are mine.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-commit was/is broken in that it accepts paths together with -a or
--interactive, which it shouldn't. There tests check those usage errors.
Signed-off-by: Björn Steinbrink <B.Steinbrink@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --skip case was handled properly when rebasing without --merge,
but the --continue case was not.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
SVN requires that paths be URI-escaped for HTTP(S) repositories.
file:// and svn:// repositories do not need these rules.
Additionally, accessing individual paths inside repositories
(check_path() and get_log() do NOT require escapes to function
and in fact it breaks things).
Noticed-by: Michael J. Cohen <mjc@cruiseplanners.com>
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
for-each-ref: fix off by one read.
git-branch: remove mention of non-existent '-b' option
git-svn: prevent dcommitting if the index is dirty.
Fix memory leak in traverse_commit_list
dcommit uses rebase to sync the history with what has just been pushed to
SVN. Trying to dcommit with a dirty index is troublesome for rebase, so now
the user will get an error message if he attempts to dcommit with a dirty
index.
Signed-off-by: Benoit Sigoure <tsuna@lrde.epita.fr>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Back in e3c6f240fd Junio taught
git-fetch to avoid copying objects when we are fetching from
a repository that is already registered as an alternate object
database. In such a case there is no reason to copy any objects
as we can already obtain them through the alternate.
However we need to ensure the objects are all reachable, so we
run `git rev-list --objects $theirs --not --all` to verify this.
If any object is missing or unreadable then we need to fetch/copy
the objects from the remote. When a missing object is detected
the git-rev-list process will exit with a non-zero exit status,
making this condition quite easy to detect.
Although git-fetch is currently a builtin (and so is rev-list)
we cannot invoke the traverse_objects() API at this point in the
transport code. The object walker within traverse_objects() calls
die() as soon as it finds an object it cannot read. If that happens
we want to resume the fetch process by calling do_fetch_pack().
To get around this we spawn git-rev-list into a background process
to prevent a die() from killing the foreground fetch process,
thus allowing the fetch process to resume into do_fetch_pack()
if copying is necessary.
We aren't interested in the output of rev-list (a list of SHA-1
object names that are reachable) or its errors (a "spurious" error
about an object not being found as we need to copy it) so we redirect
both stdout and stderr to /dev/null.
We run this git-rev-list based check before any fetch as we may
already have the necessary objects local from a prior fetch. If we
don't then its very likely the first $theirs object listed on the
command line won't exist locally and git-rev-list will die very
quickly, allowing us to start the network transfer. This test even
on remote URLs may save bandwidth if someone runs `git pull origin`,
sees a merge conflict, resets out, then redoes the same pull just
a short time later. If the remote hasn't changed between the two
pulls and the local repository hasn't had git-gc run in it then
there is probably no need to perform network transfer as all of
the objects are local.
Documentation for the new quickfetch function was suggested and
written by Junio, based on his original comment in git-fetch.sh.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
When you have a merge conflict and want to bypass the commit causing it,
you don't want to care about the dirty state of the working tree.
Also, don't git reset --hard HEAD in the rebase-skip test, so that the
lack of support for this is detected.
Signed-off-by: Mike Hommey <mh@glandium.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
