We might eventually be loosening this rule, but there is a longstanding
restriction that the users currently need to be aware of.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "config --global" suggested in the message is a valid one-shot fix,
and hopefully one-shot across machines that NFS mounts the home directories.
This knowledge can hopefully be reused when you are forced to use git on
Windows, but the fix based on GECOS would not be applicable, so
it is not such a useful hint to mention the exact reason why the
name cannot be determined.
Signed-off-by: Santi Béjar <sbejar@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the rewriteRoot setting is used with git-svn, it causes the svn
IDs added to commit messages to bear a different URL than is actually
used to retrieve Subversion data.
It is common for Subversion repositories to be available multiple
ways: for instance, HTTP to the public, and svn+ssh to people with
commit access. The need to switch URLs for access is fairly common as
well -- perhaps someone was just given commit access. To switch URLs
without having to rewrite history, one can use the old url as a
rewriteRoot, and use the new one in the svn-remote url setting.
This works well for svn fetching and general git commands.
However, git-svn dcommit, rebase, and perhaps other commands do not
work in this scenario. They scan the svn ID lines in commit messages
and attempt to match them up with url lines in [svn-remote] sections
in the git config.
This patch allows them to match rewriteRoot options, if such options
are present.
Signed-off-by: John Goerzen <jgoerzen@complete.org>
Acked-by: Eric Wong <normalperson@yhbt.net>
The subdirectory filter had a bug to notice that the commit in question
did not have anything in the path-limited part of the tree. $commit:$path
does not name an empty tree when $path does not appear in $commit.
This should fix it. The additional test in t7003 is originally from Kevin
Ballard but with fixups.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
cmd_from() ends with a call to read_next_command(), which is needed
when using cmd_from() from commands where from is not the last element.
With reset, however, "from" is the last command, after which the flow
returns to the main loop, which calls read_next_command() again.
Because of this, always set unread_command_buf in cmd_reset_branch(),
even if cmd_from() was successful.
Add a test case for this in t9300-fast-import.sh.
Signed-off-by: Adeodato Simó <dato@net.com.org.es>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The optional endp parameter to unquote_c_style() was supposed to point at
a location past the closing double quote, but it was going one beyond it.
git-fast-import used this function heavily and the bug caused it to
misparse the input stream, especially when parsing a rename command:
R "filename that needs quoting" rename-target-name
Because the function erroneously ate the whitespace after the closing dq,
this triggered "Missing space after source" error when it shouldn't.
Thanks to Adeodato Simò for having caught this.
Signed-off-by: Pierre Habouzit <madcoder@debian.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Dscho noticed that Term::ReadLine (used by send-email) colorized its
output for his TERM settings, inside t9001 tests.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The options --upload-pack (of git-fetch-pack) and --receive-pack (of
git-push) do the same as --exec (for both commands). But the former options
have the more descriptive name.
Signed-off-by: Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Way back the perl version of shortlog would take the first populated line
of the commit body. The builtin version mearly takes the first line.
This leads to empty shortlog entries when there is some viable text in
the commit.
Reinstate this behaviour igoring all lines with nothing but whitespace.
This is often useful when dealing with commits imported from foreign SCMs
that do not tidy up the log message of useless blank lines at the beginning.
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mac OS X Tiger may have a msgfmt available but it doesn't understand
how to implement --tcl. Falling back to po2msg.sh on such systems
is a reasonable behavior.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Back in 18f7c51c we switched git-ls-remote/git-peek-remote to
use the transport backend, rather than do everything itself.
As part of that switch we started to produce a non-zero exit
status if no refs were received from the remote peer, which
happens when the remote peer has no commits pushed to it yet.
(E.g. "git --git-dir=foo.git init; git ls-remote foo.git")
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A merge is not necessarily with a remote branch, it can be with any
commit.
Thanks to Paolo Ciarrocchi for pointing out the problem, and to
Nicolas Pitre for pointing out the fact that a merge is not
necessarily with a branch head.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-merge used to use either the --squash,--no-squash, --no-ff,--ff,
--no-commit,--commit option, whichever came last in the command line.
This lead to some un-intuitive behavior, having
git merge --no-commit --no-ff <branch>
actually commit the merge. Now git-merge respects --no-commit together
with --no-ff, as well as other combinations of the options. However,
this broke a selftest in t/t7600-merge.sh which expected to have --no-ff
completely override the --squash option, so that
git merge --squash --no-ff <branch>
fast-forwards, and makes a merge commit; combining --squash with --no-ff
doesn't really make sense though, and is now refused by git-merge. The
test is adapted to test --no-ff without the preceding --squash, and
another test is added to make sure the --squash --no-ff combination is
refused.
The unexpected behavior was reported by John Goerzen through
http://bing.sdebian.org/468568
Signed-off-by: Gerrit Pape <pape@smarden.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For some reason, http_cleanup was running all active slots, which could
lead in situations where a freed slot would be accessed in
fill_active_slots. OTOH, we are cleaning up, which means the caller
doesn't care about pending requests. Just forget about them instead
or running them.
Signed-off-by: Mike Hommey <mh@glandium.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous code mistakenly used wt_status_prepare to check whether the
index had anything commitable in it; however, that function is just an
init function, and will never report a dirty index.
The correct way with wt_status_* would be to call wt_status_print with the
output pointing to /dev/null or similar. However, that does extra work by
both examining the working tree and spewing status information to nowhere.
Instead, let's just implement the useful subset of wt_status_print as an
"is_index_dirty" function.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we expect a git command to notice and signal errors, we
carelessly wrote in our tests:
test_expect_success 'reject bogus request' '
do something &&
do something else &&
! git command
'
but a non-zero exit could come from the "git command" segfaulting.
A new helper function "tset_must_fail" is introduced and it is
meant to be used to make sure the command gracefully fails (iow,
dying and exiting with non zero status is counted as a failure
to "gracefully fail"). The above example should be written as:
test_expect_success 'reject bogus request' '
do something &&
do something else &&
test_must_fail git command
'
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix typo in 'test -z "url"' when checking whether a submodule url is
empty. "url" should be "$url".
Signed-off-by: Ping Yin <pkufranky@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
511707d (use only the $PATH for exec'ing git commands) made it a
requirement to call setup_path() to include the git exec-dir in PATH
before spawning any other git commands. git-receive-pack was not yet
adapted to do this and therefore fails to spawn git-unpack-objects if that
is not in the standard PATH.
Signed-off-by: Björn Steinbrink <B.Steinbrink@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-status used the buffer name to find git-status buffers, and that
can fail if the buffer has another name, for example when multiple
working directories is tracked.
Signed-off-by: Rémi Vanicat <vanicat@debian.org>
Acked-by: Alexandre Julliard <julliard@winehq.org>
Tested-by: Xavier Maillard <xma@gnu.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Don't take the local umask setting into account when installing the
templates/* files and directories, running 'make install' with umask set
to 077 resulted in template/* installed with permissions 700 and 600.
The problem was discovered by Florian Zumbiehl, reported through
http://bugs.debian.org/467518
Signed-off-by: Gerrit Pape <pape@smarden.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the user tries to commit their changes without actually staging
anything we used to display an informational dialog suggesting they
first stage those changes, then retry the commit feature.
Unfortunately I broke this in aba15f7 ("Ensure error dialogs always
appear over all other windows") and failed to fix it in the paper
bag fix that came one day after it.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
In transport.c, proxy setting (the one from the remote conf) was set through
curl_easy_setopt() call, while http.c already does the same with the
http.proxy setting. We now just use this infrastructure instead, and make
http_init() now take the struct remote as argument so that it can take the
http_proxy setting from there, and any other property that would be added
later.
At the same time, we make get_http_walker() take a struct remote argument
too, and pass it to http_init(), which makes remote defined proxy be used
for more than get_refs_via_curl().
We leave out http-fetch and http-push, which don't use remotes for the
moment, purposefully.
Signed-off-by: Mike Hommey <mh@glandium.org>
Acked-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Any request to the daemon would fail if base-path (if specified) is not
a directory. We now check for this condition early.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There were a number of die() calls before the syslog was opened; hence,
these error messages would have been sent to /dev/null in detached mode.
Now we install the daemon-specific die routine before any error message is
generated so that these messages go to the syslog.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This error message is very confusing---it doesn't tell the user
anything about how to fix the situation. And the actual fix
for the situation ("git bisect reset") does a checkout of a
potentially random branch, (compared to what the user wants to
be on for the bisect she is starting).
The simplest way to eliminate the confusion is to just make
"git bisect start" do the cleanup itself. There's no significant
loss of safety here since we already have a general safety in
the form of the reflog.
Note: We preserve the warning for any cogito users. We do this
by switching from .git/head-name to .git/BISECT_START for the
extra state, (which is a more descriptive name anyway).
Signed-off-by: Carl Worth <cworth@cworth.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When expiring reflog entries, a new temporary log is written which contains
only the entries to retain. After it is written, it is renamed to replace
the existing reflog. Currently, we check that writing of the new log is
successful and print a message on failure, but the original reflog is still
replaced with the new reflog even on failure. This patch causes the
original reflog to be retained if we fail when writing the new reflog.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a regression introduced by
1ca3d6e (send-email: squelch warning due to comparing undefined $_ to "")
where if the user was prompted for an initial In-Reply-To and didn't
provide one, messages would be sent out with an invalid In-Reply-To of
"<>"
Also add test cases for the regression and the fix. A small modification
was needed to allow send-email to take its replies from stdin if the
environment variable GIT_SEND_EMAIL_NOTTY is set.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using the '-w $cvsdir' option to cvsexportcommit, it will chdir into
$cvsdir before executing several other git commands. If $GIT_DIR is set to
a relative path (e.g. '.'), the git commands executed by cvsexportcommit
will naturally fail.
Therefore, ensure that $GIT_DIR is absolute before the chdir to $cvsdir.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The testcase verifies that 'git cvsexportcommit' functions correctly when
the '-w' option is used, and GIT_DIR is set to a relative path (e.g. '.').
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On hitting an edit point in an interactive rebase, git should prompt
the user to run "git rebase --continue"
Signed-off-by: Jonathan del Strother <jon.delStrother@bestbefore.tv>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git svn log mimics the timezone converting behaviour of svn log, but
this was undocumented.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For some reason, t5505-remote was setting GIT_CONFIG to .git/config
and exporting it. This should have been no-op, as test framework did
the same for a long time anyway.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
