"git fetch" and friends that make network connections can now be
told to only use ipv4 (or ipv6).
* ew/force-ipv4:
connect & http: support -4 and -6 switches for remote operations
The documentation for "git clean" has been corrected; it mentioned
that .git/modules/* are removed by giving two "-f", which has never
been the case.
* mm/clean-doc-fix:
Documentation/git-clean.txt: don't mention deletion of .git/modules/*
The documentation for "git clean" has been corrected; it mentioned
that .git/modules/* are removed by giving two "-f", which has never
been the case.
* mm/clean-doc-fix:
Documentation/git-clean.txt: don't mention deletion of .git/modules/*
The "user.useConfigOnly" configuration variable can be used to
force the user to always set user.email & user.name configuration
variables, serving as a reminder for those who work on multiple
projects and do not want to put these in their $HOME/.gitconfig.
* da/user-useconfigonly:
ident: add user.useConfigOnly boolean for when ident shouldn't be guessed
fmt_ident: refactor strictness checks
It turns out "git clone" over rsync transport has been broken when
the source repository has packed references for a long time, and
nobody noticed nor complained about it.
* jk/drop-rsync-transport:
transport: drop support for git-over-rsync
"git worktree" had a broken code that attempted to auto-fix
possible inconsistency that results from end-users moving a
worktree to different places without telling Git (the original
repository needs to maintain backpointers to its worktrees, but
"mv" run by end-users who are not familiar with that fact will
obviously not adjust them), which actually made things worse
when triggered.
* nd/do-not-move-worktree-manually:
worktree: stop supporting moving worktrees manually
worktree.c: fix indentation
As described in the commit message of 9b25a0b (config: add
include directive, 2012-02-06), the `--include` option is
only on by default in some cases. But our documentation
described it as just "defaults to on", which doesn't tell
the whole story.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Sometimes it is necessary to force IPv4-only or IPv6-only operation
on networks where name lookups may return a non-routable address and
stall remote operations.
The ssh(1) command has an equivalent switches which we may pass when
we run them. There may be old ssh(1) implementations out there
which do not support these switches; they should report the
appropriate error in that case.
rsync support is untouched for now since it is deprecated and
scheduled to be removed.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Reviewed-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A new "<branch>^{/!-<pattern>}" notation can be used to name a
commit that is reachable from <branch> that does not match the
given <pattern>.
* wp/sha1-name-negative-match:
object name: introduce '^{/!-<negative pattern>}' notation
test for '!' handling in rev-parse's named commits
"git worktree" had a broken code that attempted to auto-fix
possible inconsistency that results from end-users moving a
worktree to different places without telling Git (the original
repository needs to maintain backpointers to its worktrees, but
"mv" run by end-users who are not familiar with that fact will
obviously not adjust them), which actually made things worse
when triggered.
* nd/do-not-move-worktree-manually:
worktree: stop supporting moving worktrees manually
worktree.c: fix indentation
The latter half of this sentence, the removal of the submodules, was
never done with (or without) double -f back when it was written, and
we still do not do so.
Signed-off-by: Matt McCutchen <matt@mattmccutchen.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It used to be that:
git config --global user.email "(none)"
was a viable way for people to force themselves to set user.email in
each repository. This was helpful for people with more than one
email address, targeting different email addresses for different
clones, as it barred git from creating a commit unless the user.email
config was set in the per-repo config to the correct email address.
A recent change, 19ce497c (ident: keep a flag for bogus
default_email, 2015-12-10), however, declared that an explicitly
configured user.email is not bogus, no matter what its value is, so
this hack no longer works.
Provide the same functionality by adding a new configuration
variable user.useConfigOnly; when this variable is set, the
user must explicitly set user.email configuration.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Dan Aloni <alonid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Documentation for "git fetch --depth" has been updated for clarity.
* ss/clone-depth-single-doc:
docs: clarify that --depth for git-fetch works with newly initialized repos
docs: say "commits" in the --depth option wording for git-clone
docs: clarify that passing --depth to git-clone implies --single-branch
Drop a few old "todo" items by deciding that the change one of them
suggests is not such a good idea, and doing the change the other
one suggested to do.
* ss/user-manual:
user-manual: add addition gitweb information
user-manual: add section documenting shallow clones
glossary: define the term shallow clone
user-manual: remove temporary branch entry from todo list
"git tag" started listing a tag "foo" as "tags/foo" when a branch
named "foo" exists in the same repository; remove this unnecessary
disambiguation, which is a regression introduced in v2.7.0.
* jk/list-tag-2.7-regression:
tag: do not show ambiguous tag names as "tags/foo"
t6300: use test_atom for some un-modern tests
The ignore mechanism saw a few regressions around untracked file
listing and sparse checkout selection areas in 2.7.0; the change
that is responsible for the regression has been reverted.
* nd/exclusion-regression-fix:
Revert "dir.c: don't exclude whole dir prematurely if neg pattern may match"
The documentation has been updated to hint the connection between
the '--signoff' option and DCO.
* dw/signoff-doc:
Expand documentation describing --signoff
New http.proxyAuthMethod configuration variable can be used to
specify what authentication method to use, as a way to work around
proxies that do not give error response expected by libcurl when
CURLAUTH_ANY is used. Also, the codepath for proxy authentication
has been taught to use credential API to store the authentication
material in user's keyrings.
* kf/http-proxy-auth-methods:
http: use credential API to handle proxy authentication
http: allow selection of proxy authentication method
"ls-remote" learned an option to show which branch the remote
repository advertises as its primary by pointing its HEAD at.
* tg/ls-remote-symref:
ls-remote: add support for showing symrefs
ls-remote: use parse-options api
ls-remote: fix synopsis
ls-remote: document --refs option
ls-remote: document --quiet option
"git tag" started listing a tag "foo" as "tags/foo" when a branch
named "foo" exists in the same repository; remove this unnecessary
disambiguation, which is a regression introduced in v2.7.0.
* jk/list-tag-2.7-regression:
tag: do not show ambiguous tag names as "tags/foo"
t6300: use test_atom for some un-modern tests
To name a commit, you can now use the :/!-<negative pattern> regex
style, and consequentially, say
$ git rev-parse HEAD^{/!-foo}
and it will return the hash of the first commit reachable from HEAD,
whose commit message does not contain "foo". This is the opposite of the
existing <rev>^{/<pattern>} syntax.
The specific use-case this is intended for is to perform an operation,
excluding the most-recent commits containing a particular marker. For
example, if you tend to make "work in progress" commits, with messages
beginning with "WIP", you work, then it could be useful to diff against
"the most recent commit which was not a WIP commit". That sort of thing
now possible, via commands such as:
$ git diff @^{/!-^WIP}
The leader '/!-', rather than simply '/!', to denote a negative match,
is chosen to leave room for additional modifiers in the future.
Signed-off-by: Will Palmer <wmpalmer@gmail.com>
Signed-off-by: Stephen P. Smith <ischis2@cox.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The git-over-rsync protocol is inefficient and broken, and
has been for a long time. It transfers way more objects than
it needs (grabbing all of the remote's "objects/",
regardless of which objects we need). It does its own ad-hoc
parsing of loose and packed refs from the remote, but
doesn't properly override packed refs with loose ones,
leading to garbage results (e.g., expecting the other side
to have an object pointed to by a stale packed-refs entry,
or complaining that the other side has two copies of the
refs[1]).
This latter breakage means that nobody could have
successfully pulled from a moderately active repository
since cd547b4 (fetch/push: readd rsync support, 2007-10-01).
We never made an official deprecation notice in the release
notes for git's rsync protocol, but the tutorial has marked
it as such since 914328a (Update tutorial., 2005-08-30).
And on the mailing list as far back as Oct 2005, we can find
Junio mentioning it as having "been deprecated for quite
some time."[2,3,4]. So it was old news then; cogito had
deprecated the transport in July of 2005[5] (though it did
come back briefly when Linus broke git-http-pull!).
Of course some people professed their love of rsync through
2006, but Linus clarified in his usual gentle manner[6]:
> Thanks! This is why I still use rsync, even though
> everybody and their mother tells me "Linus says rsync is
> deprecated."
No. You're using rsync because you're actively doing
something _wrong_.
The deprecation sentiment was reinforced in 2008, with a
mention that cloning via rsync is broken (with no fix)[7].
Even the commit porting rsync over to C from shell (cd547b4)
lists it as deprecated! So between the 10 years of informal
warnings, and the fact that it has been severely broken
since 2007, it's probably safe to simply remove it without
further deprecation warnings.
[1] http://article.gmane.org/gmane.comp.version-control.git/285101
[2] http://article.gmane.org/gmane.comp.version-control.git/10093
[3] http://article.gmane.org/gmane.comp.version-control.git/17734
[4] http://article.gmane.org/gmane.comp.version-control.git/18911
[5] http://article.gmane.org/gmane.comp.version-control.git/5617
[6] http://article.gmane.org/gmane.comp.version-control.git/19354
[7] http://article.gmane.org/gmane.comp.version-control.git/103635
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"interpret-trailers" has been taught to optionally update a file in
place, instead of always writing the result to the standard output.
* tk/interpret-trailers-in-place:
interpret-trailers: add option for in-place editing
trailer: allow to write to files other than stdout
When we know that mtime on directory as given by the environment
is usable for the purpose of untracked cache, we may want the
untracked cache to be always used without any mtime test or
kernel name check being performed.
Also when we know that mtime is not usable for the purpose of
untracked cache, for example because the repo is shared over a
network file system, we may want the untracked-cache to be
automatically removed from the index.
Allow the user to express such preference by setting the
'core.untrackedCache' configuration variable, which can take
'keep', 'false', or 'true' and default to 'keep'.
When read_index_from() is called, it now adds or removes the
untracked cache in the index to respect the value of this
variable. So it does nothing if the value is `keep` or if the
variable is unset; it adds the untracked cache if the value is
`true`; and it removes the cache if the value is `false`.
`git update-index --[no-|force-]untracked-cache` still adds the
untracked cache to, or removes it, from the index, but this
shows a warning if it goes against the value of
core.untrackedCache, because the next time the index is read
the untracked cache will be added or removed if the
configuration is set to do so.
Also `--untracked-cache` used to check that the underlying
operating system and file system change `st_mtime` field of a
directory if files are added or deleted in that directory. But
because those tests take a long time, `--untracked-cache` no
longer performs them. Instead, there is now
`--test-untracked-cache` to perform the tests. This change
makes `--untracked-cache` the same as `--force-untracked-cache`.
This last change is backward incompatible and should be
mentioned in the release notes.
Helped-by: Duy Nguyen <pclouds@gmail.com>
Helped-by: Torsten Bögershausen <tboegi@web.de>
Helped-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
read-cache: Duy'sfixup
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git format-patch" learned to notice format.outputDirectory
configuration variable. This allows "-o <dir>" option to be
omitted on the command line if you always use the same directory in
your workflow.
* ak/format-patch-odir-config:
format-patch: introduce format.outputDirectory configuration
"git pull --rebase" has been extended to allow invoking
"rebase -i".
* js/pull-rebase-i:
completion: add missing branch.*.rebase values
remote: handle the config setting branch.*.rebase=interactive
pull: allow interactive rebase with --rebase=interactive
Since b7cc53e9 (tag.c: use 'ref-filter' APIs, 2015-07-11),
git-tag has started showing tags with ambiguous names (i.e.,
when both "heads/foo" and "tags/foo" exists) as "tags/foo"
instead of just "foo". This is both:
- pointless; the output of "git tag" includes only
refs/tags, so we know that "foo" means the one in
"refs/tags".
and
- ambiguous; in the original output, we know that the line
"foo" means that "refs/tags/foo" exists. In the new
output, it is unclear whether we mean "refs/tags/foo" or
"refs/tags/tags/foo".
The reason this happens is that commit b7cc53e9 switched
git-tag to use ref-filter's "%(refname:short)" output
formatting, which was adapted from for-each-ref. This more
general code does not know that we care only about tags, and
uses shorten_unambiguous_ref to get the short-name. We need
to tell it that we care only about "refs/tags/", and it
should shorten with respect to that value.
In theory, the ref-filter code could figure this out by us
passing FILTER_REFS_TAGS. But there are two complications
there:
1. The handling of refname:short is deep in formatting
code that does not even have our ref_filter struct, let
alone the arguments to the filter_ref struct.
2. In git v2.7.0, we expose the formatting language to the
user. If we follow this path, it will mean that
"%(refname:short)" behaves differently for "tag" versus
"for-each-ref" (including "for-each-ref refs/tags/"),
which can lead to confusion.
Instead, let's add a new modifier to the formatting
language, "strip", to remove a specific set of prefix
components. This fixes "git tag", and lets users invoke the
same behavior from their own custom formats (for "tag" or
"for-each-ref") while leaving ":short" with its same
consistent meaning in all places.
We introduce a test in t7004 for "git tag", which fails
without this patch. We also add a similar test in t3203 for
"git branch", which does not actually fail. But since it is
likely that "branch" will eventually use the same formatting
code, the test helps defend against future regressions.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, the only way to pass proxy credentials to curl is by including them
in the proxy URL. Usually, this means they will end up on disk unencrypted, one
way or another (by inclusion in ~/.gitconfig, shell profile or history). Since
proxy authentication often uses a domain user, credentials can be security
sensitive; therefore, a safer way of passing credentials is desirable.
If the configured proxy contains a username but not a password, query the
credential API for one. Also, make sure we approve/reject proxy credentials
properly.
For consistency reasons, add parsing of http_proxy/https_proxy/all_proxy
environment variables, which would otherwise be evaluated as a fallback by curl.
Without this, we would have different semantics for git configuration and
environment variables.
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Helped-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Knut Franke <k.franke@science-computing.de>
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
CURLAUTH_ANY does not work with proxies which answer unauthenticated requests
with a 307 redirect to an error page instead of a 407 listing supported
authentication methods. Therefore, allow the authentication method to be set
using the environment variable GIT_HTTP_PROXY_AUTHMETHOD or configuration
variables http.proxyAuthmethod and remote.<name>.proxyAuthmethod (in analogy
to http.proxy and remote.<name>.proxy).
The following values are supported:
* anyauth (default)
* basic
* digest
* negotiate
* ntlm
Signed-off-by: Knut Franke <k.franke@science-computing.de>
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Helped-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is nice to just be able to test if untracked cache is
supported without enabling it.
Helped-by: David Turner <dturner@twopensource.com>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current update_linked_gitdir() has a bug that can create "gitdir"
file in non-multi-worktree setup. Worse, sometimes it can write relative
path to "gitdir" file, which will not work (e.g. "git worktree list"
will display the worktree's location incorrectly)
Instead of fixing this, we step back a bit. The original design was
probably not well thought out. For now, if the user manually moves a
worktree, they have to fix up "gitdir" file manually or the worktree
will get pruned.
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
