This way a share index file will not be garbage collected if
we still read from an index it is based from.
As we need to read the current index before creating a new
one, the tests have to be adjusted, so that we don't expect
an old shared index file to be deleted right away when we
create a new one.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It looks better and is simpler to review when we don't compute
the same things many times in the function.
It will also help make the following commit simpler.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Everytime split index is turned on, it creates a "sharedindex.XXXX"
file in the git directory. This change makes sure that shared index
files that haven't been used for a long time are removed when a new
shared index file is created.
The new "splitIndex.sharedIndexExpire" config variable is created
to tell the delay after which an unused shared index file can be
deleted. It defaults to "2.weeks.ago".
A previous commit made sure that each time a split index file is
created the mtime of the shared index file it references is updated.
This makes sure that recently used shared index file will not be
deleted.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The ewah subsystem typedefs eword_t to be uint64_t, but some
code uses a bare uint64_t. This isn't a bug now, but it's a
potential maintenance problem if the definition of eword_t
ever changes. Let's use the correct type.
Note that we can't use COPY_ARRAY() here because the source
and destination point to objects of different sizes. For
that reason we'll also skip the usual "sizeof(*dst)" and use
the real type, which should make it more clear that there's
something tricky going on.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This memcpy meant to get the sizeof a "struct range", not a
"range_set", as the former is what our array holds. Rather
than swap out the types, let's convert this site to
COPY_ARRAY, which avoids the problem entirely (and confirms
that the src and dst types match).
Note for curiosity's sake that this bug doesn't trigger on
I32LP64 systems, but does on ILP32 systems. The mistaken
"struct range_set" has two ints and a pointer. That's 16
bytes on LP64, or 12 on ILP32. The correct "struct range"
type has two longs, which is also 16 on LP64, but only 8 on
ILP32.
Likewise an IL32P64 system would experience the bug.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When Git v2.9.1 was released, it had a bug that showed only on Windows
and on 32-bit systems: our assumption that `unsigned long` can hold
64-bit values turned out to be wrong.
This could have been caught earlier if we had a Continuous Testing
set up that includes a build and test run on 32-bit Linux.
Let's do this (and take care of the Windows build later). This patch
asks Travis CI to install a Docker image with 32-bit libraries and then
goes on to build and test Git using this 32-bit setup.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This likely has no real-world impact on memory usage,
but it is cleaner for future readers.
Fixes: abcbdc0389 ("http: respect protocol.*.allow=user for http-alternates")
Signed-off-by: Eric Wong <e@80x24.org>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is disconcerting for users to not notice the behavior
change in handling alternates from commit cb4d2d35c4
("http: treat http-alternates like redirects")
Give the user a hint about the config option so they can
see the URL and decide whether or not they want to enable
http.followRedirects in their config.
Signed-off-by: Eric Wong <e@80x24.org>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The idea of the test case "git -p - core.pager is not used from
subdirectory" was to verify that the setup_git_directory() function had
not been called just to obtain the core.pager setting.
However, we are about to fix the early config machinery so that it
*does* work, without messing up the global state.
Once that is done, the core.pager setting *will* be used, even when
running from a subdirectory, and that is a Good Thing.
The intention of that test case, however, was to verify that the
setup_git_directory() function has not run, because it changes global
state such as the current working directory.
To keep that spirit, but fix the incorrect assumption, this patch
replaces that test case by a new one that verifies that the pager is
run in the subdirectory, i.e. that the current working directory has
not been changed at the time the pager is configured and launched, even
if the `rev-parse` command requires a .git/ directory and *will* change
the working directory.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, the git_commit_non_empty_tree function would always pass any
commit with no parents to git-commit-tree, regardless of whether the
tree was nonempty. The new commit would then be recorded in the
filter-branch revision map, and subsequent commits which leave the tree
untouched would be correctly filtered.
With this change, parentless commits with an empty tree are correctly
pruned, and an empty file is recorded in the revision map, signifying
that it was rewritten to "no commits." This works naturally with the
parent mapping for subsequent commits.
Signed-off-by: Devin J. Pohly <djpohly@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Sanity check before changing the logic in git_commit_non_empty_tree.
Signed-off-by: Devin J. Pohly <djpohly@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
New test to expose a bug in filter-branch whereby the root commit is
never pruned, even though its tree is empty and --prune-empty is given.
The setup isn't exactly pretty, but I couldn't think of a simpler way to
create a parallel commit graph sans the first commit.
Signed-off-by: Devin J. Pohly <djpohly@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The existing implementation of range_set_union does not correctly
reallocate memory, leading to a heap overflow when it attempts to union
more than 24 separate line ranges.
For struct range_set *out to grow correctly it must have out->nr set to
the current size of the buffer when it is passed to range_set_grow.
However, the existing implementation of range_set_union only updates
out->nr at the end of the function, meaning that it is always zero
before this. This results in range_set_grow never growing the buffer, as
well as some of the union logic itself being incorrect as !out->nr is
always true.
The reason why 24 is the limit is that the first allocation of size 1
ends up allocating a buffer of size 24 (due to the call to alloc_nr in
ALLOC_GROW). This goes some way to explain why this hasn't been
caught before.
Fix the problem by correctly updating out->nr after reallocating the
range_set. As this results in out->nr containing the same value as the
variable o, replace o with out->nr as well.
Finally, add a new test to help prevent the problem reoccurring in the
future. Thanks to Vegard Nossum for writing the test.
Signed-off-by: Allan Xavier <allan.x.xavier@oracle.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It does not make sense for these placeholder scripts to depend on Python
just because the real scripts do. At the example of Git for Windows, we
would not even be able to see those warnings as it does not ship with
Python. So just use plain shell scripts instead.
Signed-off-by: Sebastian Schuberth <sschuberth@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's tempting to say:
./run v1.0.0 HEAD
to see how we've sped up Git over the years. Unfortunately,
this doesn't quite work because versions of Git prior to
v1.7.0 lack bin-wrappers, so our "run" script doesn't
correctly put them in the PATH.
Worse, it means we silently find whatever other "git" is in
the PATH, and produce test results that have no bearing on
what we asked for.
Let's fallback to the main git directory when bin-wrappers
isn't present. Many modern perf scripts won't run with such
an antique version of Git, of course, but at least those
failures are detected and reported (and you're free to write
a limited perf script that works across many versions).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 1a0962dee (t/perf: fix regression in testing older
versions of git, 2016-06-22), we point "$MODERN_GIT" to a
copy of git that matches the t/perf script itself, and which
can be used for tasks outside of the actual timings. This is
needed because the setup done by perf scripts keeps moving
forward in time, and may use features that the older
versions of git we are testing do not have.
That commit used $MODERN_GIT to fix a case where we relied
on the relatively recent --git-path option. But if you go
back further still, there are more problems.
Since 7501b5921 (perf: make the tests work in worktrees,
2016-05-13), we use "git -C", but versions of git older than
44e1e4d67 (git: run in a directory given with -C option,
2013-09-09) don't know about "-C". So testing an old version
of git with a new version of t/perf will fail the setup
step.
We can fix this by using $MODERN_GIT during the setup;
there's no need to use the antique version, since it doesn't
affect the timings. Likewise, we'll adjust the "init"
invocation; antique versions of git called this "init-db".
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In p0001, a variable was created in a test_expect_success block to be
used in later test_perf blocks, but was not exported. This caused the
variable to not appear in those blocks (this can be verified by writing
'test -n "$commit"' in those blocks), resulting in a slightly different
invocation than what was intended. Export that variable.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Linking the description for pathname quoting to the configuration
variable "core.quotePath" removes inconstistent and incomplete
sections while also giving two hints how to deal with it: Either with
"-c core.quotePath=false" or with "-z".
Signed-off-by: Andreas Heiduk <asheiduk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Enhance filter_refs (which decides whether a request for an unadvertised
object should be sent to the server) to record a new match status on the
"struct ref" when a request is not allowed, and have
report_unmatched_refs check for this status and print a special error
message, "Server does not allow request for unadvertised object".
Signed-off-by: Matt McCutchen <matt@mattmccutchen.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git fetch" currently doesn't bother to check that it got all refs it
sought, because the common case of requesting a nonexistent ref triggers
a die() in get_fetch_map. However, there's at least one case that
slipped through: "git fetch REMOTE SHA1" if the server doesn't allow
requests for unadvertised objects. Make fetch_refs_via_pack (which is
on the "git fetch" code path) call report_unmatched_refs so that we at
least get an error message in that case.
Signed-off-by: Matt McCutchen <matt@mattmccutchen.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Prepare to reuse this code in transport.c for "git fetch".
While we're here, internationalize the existing error message.
Signed-off-by: Matt McCutchen <matt@mattmccutchen.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we parse "git checkout $NAME", we try to interpret
$NAME as a local branch-name. If it is, then we point HEAD
to that branch. Otherwise, we detach the HEAD at whatever
commit $NAME points to.
We do the interpretation by calling strbuf_branchname(), and
then blindly sticking "refs/heads/" on the front. This leads
to nonsense results when expansions like "@{upstream}" or
"@" point to something besides a local branch. We end up
with a local branch name like "refs/heads/origin/master" or
"refs/heads/HEAD".
Normally this has no user-visible effect because those
branches don't exist, and so we fallback to feeding the
result to get_sha1(), which resolves them correctly.
But as the new test in t3204 shows, there are corner cases
where the effect is observable, and we check out the wrong
local branch rather than detaching to the correct one.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function asks strbuf_branchname() to expand any @-marks
in the branchname, and then we blindly stick refs/heads/ in
front of the result. This is obviously nonsense if the
expansion is "HEAD" or a ref in refs/remotes/.
The most obvious end-user effect is that creating or
renaming a branch with an expansion may have confusing
results (e.g., creating refs/heads/origin/master from
"@{upstream}" when the operation should be disallowed).
We can fix this by telling strbuf_branchname() that we are
only interested in local expansions. Any unexpanded bits are
then fed to check_ref_format(), which either disallows them
(in the case of "@{upstream}") or lets them through
("refs/heads/@" is technically valid, if a bit silly).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We use strbuf_branchname() to expand the branch name from
the command line, so you can delete the branch given by
@{-1}, for example. However, we allow other nonsense like
"@", and we do not respect our "-r" flag (so we may end up
deleting an oddly-named local ref instead of a remote one).
We can fix this by passing the appropriate "allowed" flag to
strbuf_branchname().
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-branch feeds the branch names from the command line to
strbuf_branchname(), but we do not yet tell that function
which kinds of expansions should be allowed. Let's create a
set of tests that cover both the allowed and disallowed
cases.
That shows off some breakages where we currently create or
delete the wrong ref (and will make sure that we do not
break any cases that _should_ be working when we do add more
restrictions).
Note that we check branch creation and deletion, but do not
bother with renames. Those follow the same code path as
creation.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The interpret_branch_name() function converts names like
@{-1} and @{upstream} into branch names. The expanded ref
names are not fully qualified, and may be outside of the
refs/heads/ namespace (e.g., "@" expands to "HEAD", and
"@{upstream}" is likely to be in "refs/remotes/").
This is OK for callers like dwim_ref() which are primarily
interested in resolving the resulting name, no matter where
it is. But callers like "git branch" treat the result as a
branch name in refs/heads/. When we expand to a ref outside
that namespace, the results are very confusing (e.g., "git
branch @" tries to create refs/heads/HEAD, which is
nonsense).
Callers can't know from the returned string how the
expansion happened (e.g., did the user really ask for a
branch named "HEAD", or did we do a bogus expansion?). One
fix would be to return some out-parameters describing the
types of expansion that occurred. This has the benefit that
the caller can generate precise error messages ("I
understood @{upstream} to mean origin/master, but that is a
remote tracking branch, so you cannot create it as a local
name").
However, out-parameters make the function interface somewhat
cumbersome. Instead, let's do the opposite: let the caller
tell us which elements to expand. That's easier to pass in,
and none of the callers give more precise error messages
than "@{upstream} isn't a valid branch name" anyway (which
should be sufficient).
The strbuf_branchname() function needs a similar parameter,
as most of the callers access interpret_branch_name()
through it.
We can break the callers down into two groups:
1. Callers that are happy with any kind of ref in the
result. We pass "0" here, so they continue to work
without restrictions. This includes merge_name(),
the reflog handling in add_pending_object_with_path(),
and substitute_branch_name(). This last is what powers
dwim_ref().
2. Callers that have funny corner cases (mostly in
git-branch and git-checkout). These need to make use of
the new parameter, but I've left them as "0" in this
patch, and will address them individually in follow-on
patches.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function and its companion, strbuf_check_branch_ref(),
did not have their purpose or semantics explained. Let's do
so.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The return value from strbuf_branchname() is confusing and
useless: it's 0 if the whole name was consumed by an @-mark,
but otherwise is the length of the original name we fed.
No callers actually look at the return value, so let's just
get rid of it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We generally put docstrings with function declarations,
because it's the callers who need to know how the function
works. Let's do so for interpret_branch_name().
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The interpret_branch_name() function takes a ptr/len pair
for the name, but you can pass "0" for "namelen", which will
cause it to check the length with strlen().
However, before we do that auto-namelen magic, we call
interpret_nth_prior_checkout(), which gets fed the bogus
"0". This was broken by 8cd4249c4 (interpret_branch_name:
always respect "namelen" parameter, 2014-01-15). Though to
be fair to that commit, it was broken in the _opposite_
direction before, where we would always treat "name" as a
string even if a length was passed.
You can see the bug with "git log -g @{-1}". That code path
always passes "0", and without this patch it cannot figure
out which branch's reflog to show.
We can fix it by a small reordering of the code.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Callers of diff_populate_filespec() can choose to ask only for the
size of the blob without grabbing the blob data, and the function,
after running lstat() when the filespec points at a working tree
file, returns by copying the value in size field of the stat
structure into the size field of the filespec when this is the case.
However, this short-cut cannot be taken if the contents from the
path needs to go through convert_to_git(), whose resulting real blob
data may be different from what is in the working tree file.
As "git diff --quiet" compares the .size fields of filespec
structures to skip content comparison, this bug manifests as a
false "there are differences" for a file that needs eol conversion,
for example.
Reported-by: Mike Crowe <mac@mcrowe.com>
Helped-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When invoked as "git add -i", each menu interactive menu
option prompts the user to select a list of files. This
includes the "patch" option, which gets the list before
starting the hunk-selection loop.
As "git add -p", it behaves differently, and jumps straight
to the hunk selection loop.
Since 0539d5e6d (i18n: add--interactive: mark patch prompt
for translation, 2016-12-14), the "add -i" case mistakenly
jumps to straight to the hunk-selection loop. Prior to that
commit the distinction between the two cases was managed by
the $patch_mode variable. That commit used $patch_mode for
something else, and moved the old meaning to the "$cmd"
variable. But it forgot to update the $patch_mode check
inside patch_update_cmd() which controls the file-list
behavior.
The simplest fix would be to change that line to check $cmd.
But while we're here, let's use a less obscure name for this
flag: $patch_mode_only, a boolean which tells whether we are
in full-interactive mode or only in patch-mode.
Reported-by: Henrik Grubbström <grubba@grubba.org>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add the email-style subject prefix (e.g. "Subject: [PATCH] ") directly
when it's needed instead of letting log_write_email_headers() prepare
it in a static buffer in advance. This simplifies storage ownership and
code flow.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Markdown supports automatic links by surrounding URLs with
angle brackets, as documented in
<https://daringfireball.net/projects/markdown/syntax#autolink>
While we're at it, update URLs to avoid redirecting clients for
git-scm.com (by using HTTPS) and public-inbox.org (by adding a
trailing slash).
Signed-off-by: Eric Wong <e@80x24.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the gitweb tests to skip when we can't load the Time::HiRes
module.
Gitweb needs this module to work. It has been in perl core since v5.8,
which is the oldest version we support. However CentOS (and perhaps
some other distributions) carve it into its own non-core-perl package
that's not installed along with /usr/bin/perl by default. Without this
we'll hard fail the gitweb tests when trying to load the module.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the phrasing so that instead of saying that the CGI module is
unusable, we say that it's not available.
This came up on the git mailing list in
<4b34e3a0-3da7-d821-2a7f-9a420ac1d3f6@gmail.com> from Jakub Narębski.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function will be used in a following commit to get the expiration
time of the shared index files from the config, and it is generic
enough to be put in "config.c".
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a split-index file is created, let's update the mtime of the
shared index file that the split-index file is referencing.
In a following commit we will make shared index file expire
depending on their mtime, so updating the mtime makes sure that
the shared index file will not be deleted soon.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function will be used in a commit soon, so let's make
it available globally.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When writing a new split-index and there is a big number of cache
entries in the split-index compared to the shared index, it is a
good idea to regenerate the shared index.
By default when the ratio reaches 20%, we will push back all
the entries from the split-index into a new shared index file
instead of just creating a new split-index file.
The threshold can be configured using the
"splitIndex.maxPercentChange" config variable.
We need to adjust the existing tests in t1700 by setting
"splitIndex.maxPercentChange" to 100 at the beginning of t1700,
as the existing tests are assuming that the shared index is
regenerated only when `git update-index --split-index` is used.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This new function will be used in a following commit to get the
value of the "splitIndex.maxPercentChange" config variable.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When users are using `git update-index --(no-)split-index`, they
may expect the split-index feature to be used or not according to
the option they just used, but this might not be the case if the
new "core.splitIndex" config variable has been set. In this case
let's warn about what will happen and why.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This will make us use the split-index feature or not depending
on the value of the "core.splitIndex" config variable.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
