Add missing leading dash to proposed commands in french output when
using the command:
git branch --set-upstream remotename/branchname
and when upstream is gone
Signed-off-by: Sandy Carter <sandy.carter@savoirfairelinux.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a remote has multiple fetch refspecs and these overlap in the
target namespace, fetch may prune a remote-tracking branch which still
exists in the remote. The test uses a popular form of this, by putting
pull requests as stored in a popular hosting platform alongside "real"
remote-tracking branches.
The fetch command makes a decision of whether to prune based
on the first matching refspec, which in this case is insufficient, as it
covers the pull request names. This pair of refspecs does work as
expected if the more "specific" refspec is the first in the list.
Signed-off-by: Carlos Martín Nieto <cmn@elego.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We sometimes write tempfiles of the form "shallow_XXXXXX"
during fetch/push operations with shallow repositories.
Under normal circumstances, we clean up the result when we
are done. However, we do no take steps to clean up after
ourselves when we exit due to die() or signal death.
This patch teaches the tempfile creation code to register
handlers to clean up after ourselves. To handle this, we
change the ownership semantics of the filename returned by
setup_temporary_shallow. It now keeps a copy of the filename
itself, and returns only a const pointer to it.
We can also do away with explicit tempfile removal in the
callers. They all exit not long after finishing with the
file, so they can rely on the auto-cleanup, simplifying the
code.
Note that we keep things simple and maintain only a single
filename to be cleaned. This is sufficient for the current
caller, but we future-proof it with a die("BUG").
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we are about to write the shallow file, we check that
it has not changed since we last read it. Instead of
hand-rolling this, we can use stat_validity. This is built
around the index stat-check, so it is more robust than just
checking the mtime, as we do now (it uses the same check as
we do for index files).
The new code also handles the case of a shallow file
appearing unexpectedly. With the current code, two
simultaneous processes making us shallow (e.g., two "git
fetch --depth=1" running at the same time in a non-shallow
repository) can race to overwrite each other.
As a bonus, we also remove a race in determining the stat
information of what we read (we stat and then open, leaving
a race window; instead we should open and then fstat the
descriptor).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When QUICK is set (i.e. with --quiet) we try to do as little work as
possible, stopping after seeing the first change. stat-dirty is
considered a "change" but it may turn out not, if no actual content is
changed. The actual content test is performed too late in the process
and the shortcut may be taken prematurely, leading to incorrect return
code.
Assume we do "git diff --quiet". If we have a stat-dirty file "a" and
a really dirty file "b". We break the loop in run_diff_files() and
stop after "a" because we have got a "change". Later in
diffcore_skip_stat_unmatch() we find out "a" is actually not
changed. But there's nothing else in the diff queue, we incorrectly
declare "no change", ignoring the fact that "b" is changed.
This also happens to "git diff --quiet HEAD" when it hits
diff_can_quit_early() in oneway_diff().
This patch does the content test earlier in order to keep going if "a"
is unchanged. The test result is cached so that when
diffcore_skip_stat_unmatch() is done in the end, we spend no cycles on
re-testing "a".
Reported-by: IWAMOTO Toshihiro <iwamoto@valinux.co.jp>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
cmd_clean() has the exact same code of index_name_is_other(). Reduce
code duplication.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This instance was left out when many match_pathspec() call sites that
take input from dir_entry were converted to dir_path_match() because
it passed a path with the trailing slash stripped out to match_pathspec()
while the others did not. Stripping for all call sites back then would
be a regression because match_pathspec() did not know how to match
pathspec foo/ against _directory_ foo (the stripped version of path
"foo/").
match_pathspec() knows how to do it now. And dir_path_match() strips
the trailing slash also. Use the new function, because the stripping
code is removed in the next patch.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch activates the DO_MATCH_DIRECTORY code in m_p_i(), which
makes "git diff HEAD submodule/" and "git diff HEAD submodule" produce
the same output. Previously only the version without trailing slash
returns the difference (if any).
That's the effect of new ce_path_match(). dir_path_match() is not
executed by the new tests. And it should not introduce regressions.
Previously if path "dir/" is passed in with pathspec "dir/", they
obviously match. With new dir_path_match(), the path becomes
_directory_ "dir" vs pathspec "dir/", which is not executed by the old
code path in m_p_i(). The new code path is executed and produces the
same result.
The other case is pathspec "dir" and path "dir/" is now turned to
"dir" (with DO_MATCH_DIRECTORY). Still the same result before or after
the patch.
So why change? Because of the next patch about clean.c.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently we do support matching pathspec "foo/" against directory
"foo". That is because match_pathspec() has no way to tell "foo" is a
directory and matching "foo/" against _file_ "foo" is wrong.
The callers can now tell match_pathspec if "foo" is a directory, we
could make an exception for this case. Code is not executed though
because no callers pass the flag yet.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A long time ago, for some reason I was not happy with
match_pathspec(). I created a better version, match_pathspec_depth()
that was suppose to replace match_pathspec()
eventually. match_pathspec() has finally been gone since 6 months
ago. Use the shorter name for match_pathspec_depth().
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This helps reduce the number of match_pathspec_depth() call sites and
show how m_p_d() is used. And it usage is:
- match against an index entry (ce_path_match or match_pathspec_depth
in ls-files)
- match against a dir_entry from read_directory (dir_path_match and
match_pathspec_depth in clean.c, which will be converted later)
- resolve-undo (rerere.c and ls-files.c)
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This helps reduce the number of match_pathspec_depth() call sites and
show how match_pathspec_depth() is used.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach add_cacheinfo to tell make_cache_entry to skip refreshing stat
information when a file is missing from the work tree. We do not want
the index to be stat-dirty after the merge but also do not want to fail
when a file happens to be missing.
This fixes the 'merge-recursive w/ empty work tree - ours has rename'
case in t3030-merge-recursive.
Suggested-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Brad King <brad.king@kitware.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert the make_cache_entry boolean 'refresh' argument to a more
general 'refresh_options' argument. Pass the value through to the
underlying refresh_cache_ent call. Add option CE_MATCH_REFRESH to
enable stat refresh. Update call sites to use the new signature.
Signed-off-by: Brad King <brad.king@kitware.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move lstat ENOENT handling from refresh_index to refresh_cache_ent and
activate it with a new CE_MATCH_IGNORE_MISSING option. This will allow
other call paths into refresh_cache_ent to use the feature.
Signed-off-by: Brad King <brad.king@kitware.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Sometimes when working with a large repository it can be useful to try
out a merge and only check out conflicting files to disk (for example as
a speed optimization on a server). Until v1.7.7-rc1~28^2~20
(merge-recursive: When we detect we can skip an update, actually skip
it, 2011-08-11), it was possible to do so with the following idiom:
# Prepare a temporary index and empty work tree.
GIT_INDEX_FILE="$PWD/tmp-$$-index" &&
export GIT_INDEX_FILE &&
GIT_WORK_TREE="$PWD/tmp-$$-work" &&
export GIT_WORK_TREE &&
mkdir "$GIT_WORK_TREE" &&
# Convince the index that our side is on disk.
git read-tree -i -m $ours &&
git update-index --ignore-missing --refresh &&
# Merge their side into our side.
bases=$(git merge-base --all $ours $theirs) &&
git merge-recursive $bases -- $ours $theirs &&
tree=$(git write-tree)
Nowadays, that still works and the exit status is the same, but
merge-recursive produces a diagnostic if "our" side renamed a file:
error: addinfo_cache failed for path 'dst'
Add a test to document this regression.
Signed-off-by: Brad King <brad.king@kitware.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The remote we push can be defined either by
remote.pushdefault or by branch.*.pushremote for the current
branch. The order in which they appear in the config file
should not matter to precedence (which should be to prefer
the branch-specific config).
The current code parses the config linearly and uses a
single string to store both values, overwriting any
previous value. Thus, config like:
[branch "master"]
pushremote = foo
[remote]
pushdefault = bar
erroneously ends up pushing to "bar" from the master branch.
We can fix this by storing both values and resolving the
correct value after all config is read.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many code paths assume that show_date and show_ident_date
cannot return NULL. For the most part, we handle missing or
corrupt timestamps by showing the epoch time t=0.
However, we might still return NULL if gmtime rejects the
time_t we feed it, resulting in a segfault. Let's catch this
case and just format t=0.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If an ident line has a ridiculous date value like (2^64)+1,
we currently just pass ULONG_MAX along to the date code,
which can produce nonsensical dates.
On systems with a signed long time_t (e.g., 64-bit glibc
systems), this actually doesn't end up too bad. The
ULONG_MAX is converted to -1, we apply the timezone field to
that, and the result ends up somewhere between Dec 31, 1969
and Jan 1, 1970.
However, there is still a few good reasons to detect the
overflow explicitly:
1. On systems where "unsigned long" is smaller than
time_t, we get a nonsensical date in the future.
2. Even where it would produce "Dec 31, 1969", it's easier
to recognize "midnight Jan 1" as a consistent sentinel
value for "we could not parse this".
3. Values which do not overflow strtoul but do overflow a
signed time_t produce nonsensical values in the past.
For example, on a 64-bit system with a signed long
time_t, a timestamp of 18446744073000000000 produces a
date in 1947.
We also recognize overflow in the timezone field, which
could produce nonsensical results. In this case we show the
parsed date, but in UTC.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we check whether a timestamp has overflowed, we check
only against ULONG_MAX, meaning that strtoul has overflowed.
However, we also feed these timestamps to system functions
like gmtime, which expect a time_t. On many systems, time_t
is actually smaller than "unsigned long" (e.g., because it
is signed), and we would overflow when using these
functions. We don't know the actual size or signedness of
time_t, but we can easily check for truncation with a simple
assignment.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we check commit objects, we complain if commit->date is
ULONG_MAX, which is an indication that we saw integer
overflow when parsing it. However, we do not do any check at
all for author lines, which also contain a timestamp.
Let's actually check the timestamps on each ident line
with strtoul. This catches both author and committer lines,
and we can get rid of the now-redundant commit->date check.
Note that like the existing check, we compare only against
ULONG_MAX. Now that we are calling strtoul at the site of
the check, we could be slightly more careful and also check
that errno is set to ERANGE. However, this will make further
refactoring in future patches a little harder, and it
doesn't really matter in practice.
For 32-bit systems, one would have to create a commit at the
exact wrong second in 2038. But by the time we get close to
that, all systems will hopefully have moved to 64-bit (and
if they haven't, they have a real problem one second later).
For 64-bit systems, by the time we get close to ULONG_MAX,
all systems will hopefully have been consumed in the fiery
wrath of our expanding Sun.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When t4212 was originally added by 9dbe7c3d (pretty: handle
broken commit headers gracefully, 2013-04-17), it tested our
handling of commits with broken ident lines in which the
timestamps could not be parsed. It does so using a bogus line
like "Name <email>-<> 1234 -0000", because that simulates an
error that was seen in the wild.
Later, 03818a4 (split_ident: parse timestamp from end of
line, 2013-10-14) made our parser smart enough to actually
find the timestamp on such a line, and t4212 was adjusted to
match. While it's nice that we handle this real-world case,
this meant that we were not actually testing the
bogus-timestamp case anymore.
This patch adds a test with a totally incomprehensible
timestamp to make sure we are testing the code path.
Note that the behavior is slightly different between regular log
output and "--format=%ad". In the former case, we produce a
sentinel value and in the latter, we produce an empty
string. While at first this seems unnecessarily
inconsistent, it matches the original behavior given by
9dbe7c3d.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Modern versions of "git submodule" use .git-files to setup the
submodule directory. When run in a "git submodule"-created
repository "git difftool --dir-diff" dies with the following
error:
$ git difftool -d HEAD~
fatal: This operation must be run in a work tree
diff --raw --no-abbrev -z HEAD~: command returned error: 128
core.worktree is relative to the .git directory but the logic
in find_worktree() does not account for it.
Use `git rev-parse --show-toplevel` to find the worktree so that
the dir-diff feature works inside a submodule.
Reported-by: Gábor Lipták <gabor.liptak@gmail.com>
Helped-by: Jens Lehmann <jens.lehmann@web.de>
Helped-by: John Keeping <john@keeping.me.uk>
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Refreshing index requires work tree. So we have two options: always
set up work tree (and refuse to reset if failing to do so), or make
refreshing index optional.
As refreshing index is not the main task, it makes more sense to make
it optional. This allows us to still work in a bare repository to update
what is in the index.
Reported-by: Patrick Palka <patrick@parcs.ath.cx>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The GIT_EXTERNAL_DIFF calling code attempts to reuse existing worktree
files for the worktree side of diffs, for performance reasons.
However, that code also tries to do the same with submodules. This
results in calls to $GIT_EXTERNAL_DIFF where the old-file is a file of
the form "Submodule commit $sha1", but the new-file is a directory in
the worktree.
Fix it by never reusing a worktree "file" in the submodule case.
Reported-by: Grégory Pakosz <gregory.pakosz@gmail.com>
Signed-off-by: Thomas Rast <tr@thomasrast.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git merge-base --octopus" used to leave cleaning up suboptimal
result to the caller, but now it does the clean-up itself.
* bm/merge-base-octopus-dedup:
merge-base --octopus: reduce the result from get_octopus_merge_bases()
merge-base: separate "--independent" codepath into its own helper
"git log --left-right A...B" lost the "leftness" of commits
reachable from A when A is a tag as a side effect of a recent
bugfix. This is a regression in 1.8.4.x series.
* jc/revision-range-unpeel:
revision: propagate flag bits from tags to pointees
revision: mark contents of an uninteresting tree uninteresting
"git clone" would fail to clone from a repository that has a ref
directly under "refs/", e.g. "refs/stash", because different
validation paths do different things on such a refname. Loosen the
client side's validation to allow such a ref.
* jk/allow-fetch-onelevel-refname:
fetch-pack: do not filter out one-level refs
A handful of bugs around interpreting $branch@{upstream} notation
and its lookalike, when $branch part has interesting characters,
e.g. "@", and ":", have been fixed.
* jk/interpret-branch-name-fix:
interpret_branch_name: find all possible @-marks
interpret_branch_name: avoid @{upstream} past colon
interpret_branch_name: always respect "namelen" parameter
interpret_branch_name: rename "cp" variable to "at"
interpret_branch_name: factor out upstream handling
A recent update to "git send-email" broke platforms where
/etc/ssl/certs/ directory exists but cannot be used as SSL_ca_path
(e.g. Fedora rawhide).
* rk/send-email-ssl-cert:
send-email: /etc/ssl/certs/ directory may not be usable as ca_path
"git repack --max-pack-size=8g" stopped being parsed correctly when
the command was reimplemented in C.
* sb/repack-in-c:
repack: propagate pack-objects options as strings
repack: make parsed string options const-correct
repack: fix typo in max-pack-size option
The pathspec matching code, while comparing two trees (e.g. "git
diff A B -- path1 path2") was too aggressive and failed to match
some paths when multiple pathspecs were involved.
* as/tree-walk-fix-aggressive-short-cut:
tree_entry_interesting: match against all pathspecs
start_httpd is supposed to be at the beginning of the test file, not
the middle of it. The "test_seq" line in "no shallow lines.." test is
updated to compensate missing refs that are there in t5537, but not in
the new t5539.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The recent translation was giving the idea that all commits
based on a graft were meant to be hidden. Make it clear that
it is the graft commit itself.
Reported-by: David Kastrup <dak@gnu.org>
Signed-off-by: Ralf Thielow <ralf.thielow@gmail.com>
In smart http, upload-pack adds new shallow lines at the beginning of
each rpc response. Only shallow lines from the first rpc call are
useful. After that they are thrown away. It's designed this way
because upload-pack is stateless and has no idea when its shallow
lines are helpful or not.
So after refs are negotiated with multi_ack_detailed and the server
thinks it learned enough, it sends "ACK obj-id ready", terminates the
rpc call and waits for the final rpc round. The client sends "done".
The server sends another response, which also has shallow lines at
the beginning, and the last "ACK obj-id" line.
When no-done is active, the last round is cut out, the server sends
"ACK obj-id ready" and "ACK obj-id" in the same rpc
response. fetch-pack is updated to recognize this and not send
"done". However it still tries to consume shallow lines, which are
never sent.
Update the code, make sure to skip consuming shallow lines when
no-done is enabled.
Reported-by: Jeff King <peff@peff.net>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
See 3e63b21 (upload-pack: Implement no-done capability - 2011-03-14)
and 761ecf0 (fetch-pack: Implement no-done capability - 2011-03-14)
for more information.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
pack-protocol.txt explains in detail how multi_ack_detailed works and
what's the difference between no multi_ack, multi_ack and
multi_ack_detailed. No need to repeat here.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's introduced in 1bd8c8f (git-upload-pack: Support the multi_ack
protocol - 2005-10-28) but probably better documented in the commit
message of 78affc4 (Add multi_ack_detailed capability to
fetch-pack/upload-pack - 2009-10-30).
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make clear which one is for dumb protocol, which one is for smart from
their file name.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
