Otherwise we are completely ignoring the --cur argument.
The issue can be tested with:
git clone --config=branch.<tab>
Reviewed-by: SZEDER Gábor <szeder.dev@gmail.com>
Tested-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Codepath to access recently added oidtree data structure had
to make unaligned accesses to oids, which has been corrected.
* rs/oidtree-alignment-fix:
oidtree: avoid unaligned access to crit-bit tree
Also fixed some typos reported by "git-po-helper".
Signed-off-by: Peter Krefting <peter@softwolves.pp.se>
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
The flexible array member "k" of struct cb_node is used to store the key
of the crit-bit tree node. It offers no alignment guarantees -- in fact
the current struct layout puts it one byte after a 4-byte aligned
address, i.e. guaranteed to be misaligned.
oidtree uses a struct object_id as cb_node key. Since cf0983213c (hash:
add an algo member to struct object_id, 2021-04-26) it requires 4-byte
alignment. The mismatch is reported by UndefinedBehaviorSanitizer at
runtime like this:
hash.h:277:2: runtime error: member access within misaligned address 0x00015000802d for type 'struct object_id', which requires 4 byte alignment
0x00015000802d: note: pointer points here
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
^
SUMMARY: UndefinedBehaviorSanitizer: undefined-behavior hash.h:277:2 in
We can fix that by:
1. eliminating the alignment requirement of struct object_id,
2. providing the alignment in struct cb_node, or
3. avoiding the issue by only using memcpy to access "k".
Currently we only store one of two values in "algo" in struct object_id.
We could use a uint8_t for that instead and widen it only once we add
support for our twohundredth algorithm or so. That would not only avoid
alignment issues, but also reduce the memory requirements for each
instance of struct object_id by ca. 9%.
Supporting keys with alignment requirements might be useful to spread
the use of crit-bit trees. It can be achieved by using a wider type for
"k" (e.g. uintmax_t), using different types for the members "byte" and
"otherbits" (e.g. uint16_t or uint32_t for each), or by avoiding the use
of flexible arrays like khash.h does.
This patch implements the third option, though, because it has the least
potential for causing side-effects and we're close to the next release.
If one of the other options is implemented later as well to get their
additional benefits we can get rid of the extra copies introduced here.
Reported-by: Andrzej Hunt <andrzej@ahunt.org>
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
e9f79acb28 (ci: upgrade to using actions/{up,down}load-artifacts v2,
2021-06-23) changed all calls to that action from v1 to v2, but there
is still an open bug[1] that affects all nodejs actions and prevents
its use in 32-bit linux (as used by the Linux32 container)
move all dockerized jobs to use v1 that was built in C# and therefore
doesn't have this problem, which will otherwise manifest with confusing
messages like:
/usr/bin/docker exec 0285adacc4536b7cd962079c46f85fa05a71e66d7905b5e4b9b1a0e8b305722a sh -c "cat /etc/*release | grep ^ID"
OCI runtime exec failed: exec failed: container_linux.go:380: starting container process caused: no such file or directory: unknown
[1] https://github.com/actions/runner/issues/1011
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Recent changes to --fixup, adding amend suboption, caused the
--edit flag to be ignored as use_editor was always set to zero.
Restore edit_flag having higher priority than fixup_message when
deciding the value of use_editor by moving the edit flag condition
later in the method.
Signed-off-by: Joel Klinghed <the_jk@spawned.biz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Translate 48 new messages (5230t0f0u) for git 2.33.0, and also fixed
typos found by "git-po-helper".
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
Signed-off-by: Fangyi Zhou <me@fangyi.io>
Format README.md using GFM (GitHub Flavored Markdown) syntax.
- In order to use more than 3 level headings, use ATX style headings
instead of setext style headings.
- In order to add highlights for code blocks, use fenced code blocks
instead of indented code blocks.
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
Update translation for following component:
* builtin/submodule--helper.c
Translate following new component:
* builtin/revert.c
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
* 'master' of github.com:git/git: (51 commits)
Git 2.33-rc2
object-file: use unsigned arithmetic with bit mask
Revert 'diff-merges: let "-m" imply "-p"'
object-store: avoid extra ';' from KHASH_INIT
oidtree: avoid nested struct oidtree_node
Git 2.33-rc1
test: fix for COLUMNS and bash 5
The eighth batch
diff: --pickaxe-all typofix
mingw: align symlinks-related rmdir() behavior with Linux
t7508: avoid non POSIX BRE
use fspathhash() everywhere
t0001: fix broken not-quite getcwd(3) test in bed67874e2
Documentation: render special characters correctly
reset: clear_unpack_trees_porcelain to plug leak
builtin/rebase: fix options.strategy memory lifecycle
builtin/merge: free found_ref when done
builtin/mv: free or UNLEAK multiple pointers at end of cmd_mv
convert: release strbuf to avoid leak
read-cache: call diff_setup_done to avoid leak
...
If the user skips the final commit by removing all the changes from
the index and worktree with 'git restore' (or read-tree) and then runs
'git rebase --continue' .git/MERGE_MSG is left behind. This will seed
the commit message the next time the user commits which is not what we
want to happen.
Reported-by: Victor Gambier <vgambier@excilys.com>
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
980b482d28 ("rebase tests: mark tests specific to the am-backend with
--am", 2020-02-15) sought to prepare tests testing the "apply" backend
in preparation for 2ac0d6273f ("rebase: change the default backend
from "am" to "merge"", 2020-02-15). However some tests seem to have
been missed leading to us testing the "merge" backend twice. This
patch fixes some cases that I noticed while adding tests to these
files, I have not audited all the other rebase test files. I've
reworded a couple of the test descriptions to make it clear which
backend they are testing.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Setting GIT_AUTHOR_* when committing with --amend will only change the
author if we also pass --reset-author. This commit is used in some
tests that ensure the author ident does not change when rebasing.
Creating this commit without changing the authorship meant that the
test would not catch regressions that caused rebase to discard the
original authorship information.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
make sure it uses a supported OS branch and uses all the resources
that can be allocated efficiently.
while only 1GB of memory is needed, 2GB is the minimum for a 2 CPU
machine (the default), but by increasing parallelism wall time has
been reduced by 35%.
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Function `traverse_trees_and_blobs` not only works on trees and blobs,
but also on tags, the function name is somewhat misleading. This commit
rename it to `traverse_non_commits`.
Signed-off-by: Teng Long <dyroneteng@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jiang Xin reported possible typos in po/id.po, all of them are mismatch
variable names. Fix them.
Reported-by: Jiang Xin <worldhello.net@gmail.com>
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
In this test, we currently use the SHA1 prerequisite to specify the
algorithm we're using to test, since SHA-256 bundles are always v3,
whereas SHA-1 bundles default to v2, and as a result the default output
differs.
However, this causes a problem if we run with GIT_TEST_FAIL_PREREQS set,
since that means that we'll unexpectedly fail the SHA1 prerequisite,
resulting in incorrect expected output. Let's fix this by checking
against the built-in data called "algo", which tells us which algorithm
is in use. This should work in any situation, making our test a little
more robust.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
