Fix a recent regression to "git rebase -i" and add tests that would
have caught it and others.
* pw/rebase-i-regression-fix-tests:
t3420: fix under GETTEXT_POISON build
rebase: add more regression tests for console output
rebase: add regression tests for console output
rebase -i: add test for reflog message
sequencer: print autostash messages to stderr
"git add -p" were updated in 2.12 timeframe to cope with custom
core.commentchar but the implementation was buggy and a
metacharacter like $ and * did not work.
* jk/add-p-commentchar-fix:
add--interactive: quote commentChar regex
add--interactive: handle EOF in prompt_yesno
The code to pick up and execute command alias definition from the
configuration used to switch to the top of the working tree and
then come back when the expanded alias was executed, which was
unnecessarilyl complex. Attempt to simplify the logic by using the
early-config mechanism that does not chdir around.
* js/alias-early-config:
alias: use the early config machinery to expand aliases
t7006: demonstrate a problem with aliases in subdirectories
t1308: relax the test verifying that empty alias values are disallowed
help: use early config when autocorrecting aliases
config: report correct line number upon error
discover_git_directory(): avoid setting invalid git_dir
The pretty-format specifiers like '%h', '%t', etc. had an
optimization that no longer works correctly. In preparation/hope
of getting it correctly implemented, first discard the optimization
that is broken.
* rs/pretty-add-again:
pretty: recalculate duplicate short hashes
An example in documentation that does not work in multi worktree
configuration has been corrected.
* ah/doc-gitattributes-empty-index:
doc: do not use `rm .git/index` when normalizing line endings
"git mergetool" learned to work around a wrapper MacOS X adds
around underlying meld.
* da/mergetools-meld-output-opt-on-macos:
mergetools/meld: improve compatibiilty with Meld on macOS X
The 'diff-highlight' program (in contrib/) has been restructured
for easier reuse by an external project 'diff-so-fancy'.
* jk/diff-highlight-module:
diff-highlight: split code into module
Reported-by: Andre Hinrichs <andre.hinrichs@gmx.de>
Signed-off-by: Ralf Thielow <ralf.thielow@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Code clean-up.
* sg/revision-parser-skip-prefix:
revision.c: use skip_prefix() in handle_revision_pseudo_opt()
revision.c: use skip_prefix() in handle_revision_opt()
revision.c: stricter parsing of '--early-output'
revision.c: stricter parsing of '--no-{min,max}-parents'
revision.h: turn rev_info.early_output back into an unsigned int
"git stash push <pathspec>" did not work from a subdirectory at all.
Bugfix for a topic in v2.13
* ps/stash-push-pathspec-fix:
git-stash: fix pushing stash with pathspec from subdir
The result from "git diff" that compares two blobs, e.g. "git diff
$commit1:$path $commit2:$path", used to be shown with the full
object name as given on the command line, but it is more natural to
use the $path in the output and use it to look up .gitattributes.
* jk/diff-blob:
diff: use blob path for blob/file diffs
diff: use pending "path" if it is available
diff: use the word "path" instead of "name" for blobs
diff: pass whole pending entry in blobinfo
handle_revision_arg: record paths for pending objects
handle_revision_arg: record modes for "a..b" endpoints
t4063: add tests of direct blob diffs
get_sha1_with_context: dynamically allocate oc->path
get_sha1_with_context: always initialize oc->symlink_path
sha1_name: consistently refer to object_context as "oc"
handle_revision_arg: add handle_dotdot() helper
handle_revision_arg: hoist ".." check out of range parsing
handle_revision_arg: stop using "dotdot" as a generic pointer
handle_revision_arg: simplify commit reference lookups
handle_revision_arg: reset "dotdot" consistently
"git describe --contains" penalized light-weight tags so much that
they were almost never considered. Instead, give them about the
same chance to be considered as an annotated tag that is the same
age as the underlying commit would.
* jc/name-rev-lw-tag:
name-rev: favor describing with tags and use committer date to tiebreak
name-rev: refactor logic to see if a new candidate is a better name
Newly added tests to t3420 in this series prepare expected
human-readable output from "git rebase -i" and then compare the
actual output with it. As the output from the command is designed
to go through i18n/l10n, we need to use test_i18ncmp to tell
GETTEXT_POISON build that it is OK the output does not match.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since c9d961647 (i18n: add--interactive: mark
edit_hunk_manually message for translation, 2016-12-14),
when the user asks to edit a hunk manually, we respect
core.commentChar in generating the edit instructions.
However, when we then strip out comment lines, we use a
simple regex like:
/^$commentChar/
If your chosen comment character is a regex metacharacter,
then that will behave in a confusing manner ("$", for
instance, would only eliminate blank lines, not actual
comment lines).
We can fix that by telling perl not to respect
metacharacters.
Reported-by: Christian Rösch <christian@croesch.de>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The prompt_yesno function loops indefinitely waiting for a
"y" or "n" response. But it doesn't handle EOF, meaning
that we can end up in an infinite loop of reading EOF from
stdin. One way to simulate that is with:
echo e | GIT_EDITOR='echo corrupt >' git add -p
Let's break out of the loop and propagate the undef to the
caller. Without modifying the callers that effectively turns
it into a "no" response. This is reasonable for both of the
current callers, and it leaves room for any future caller to
check for undef explicitly.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Check the console output when using --autostash and the stash does not
apply is what we expect. The test is quite strict but should catch any
changes to the console output from the various rebase flavors.
Thanks-to: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Check the console output when using --autostash and the stash applies
cleanly is what we expect. The test is quite strict but should catch
any changes to the console output from the various rebase flavors.
Thanks-to: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Check that the reflog message written to the branch reflog when the
rebase is completed is correct
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The rebase messages are printed to stderr traditionally. However due
to a bug introduced in 587947750b (rebase: implement --[no-]autostash
and rebase.autostash, 2013-05-12) which was faithfully copied when
reimplementing parts of the interactive rebase in the sequencer the
autostash messages are printed to stdout instead.
It is time to fix that: let's print the autostash messages to stderr
instead of stdout.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The macOS X fork of Meld[1] requires a "=" in the "--output"
argument, as it uses a wrapper[2] script that munges the
"--output" argument before calling into the common "meld"
script.
The macOS X wrapper script[2] accepts "--output=<filename>"
only, despite the fact that the underlying meld code accepts
both "--output <filename" and "--output=<filename>"[3].
All versions of meld which accept "--output" accept it in
the "--output=<filename>" form, so use "--output=<file>" for
maximum compatibility.
[1] https://github.com/yousseb/meld
[2] https://github.com/yousseb/meld/blob/master/osx/Meld
[3] https://github.com/yousseb/meld/issues/42
Reported-by: Matthew Groth <mgroth49@gmail.com>
Helped-by: Samuel Lijin <sxlijin@gmail.com>
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of discovering the .git/ directory, reading the config and then
trying to painstakingly reset all the global state if we did not find a
matching alias, let's use the early config machinery instead.
It may look like unnecessary work to discover the .git/ directory in the
early config machinery and then call setup_git_directory_gently() in the
case of a shell alias, repeating the very same discovery *again*.
However, we have to do this as the early config machinery takes pains
*not* to touch any global state, while shell aliases expect a possibly
changed working directory and at least the GIT_PREFIX and GIT_DIR
variables to be set.
This change also fixes a known issue where Git tried to read the pager
config from an incorrect path in a subdirectory of a Git worktree if an
alias expanded to a shell command.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When expanding aliases, the git_dir is set during the alias expansion
(by virtue of running setup_git_directory_gently()).
This git_dir may be relative to the current working directory, and
indeed often is simply ".git/".
When the alias expands to a shell command, we restore the original
working directory, though, yet we do not reset git_dir.
As a consequence, subsequent read_early_config() runs will mistake the
git_dir to be populated properly and not find the correct config.
Demonstrate this problem by adding a test case.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We are about to change the way aliases are expanded, to use the early
config machinery.
This machinery reports errors in a slightly different manner than the
cached config machinery.
Let's not get hung up by the precise wording of the message mentioning
the line number. It is really sufficient to verify that all the relevant
information is given to the user.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git has this feature which suggests similar commands (including aliases)
in case the user specified an unknown command.
This feature currently relies on a side effect of the way we expand
aliases right now: when a command is not a builtin, we use the regular
config machinery (meaning: discovering the .git/ directory and
initializing global state such as the config cache) to see whether the
command refers to an alias.
However, we will change the way aliases are expanded in the next
commits, to use the early config instead. That means that the
autocorrect feature can no longer discover the available aliases by
looking at the config cache (because it has not yet been initialized).
So let's just use the early config machinery instead.
This is slightly less performant than the previous way, as the early
config is used *twice*: once to see whether the command refers to an
alias, and then to see what aliases are most similar. However, this is
hardly a performance-critical code path, so performance is less important
here.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When get_value() parses a key/value pair, it is possible that the line
number is decreased (because the \n has been consumed already) before the
key/value pair is passed to the callback function, to allow for the
correct line to be attributed in case of an error.
However, when git_parse_source() asks get_value() to parse the key/value
pair, the error reporting is performed *after* get_value() returns.
Which means that we have to be careful not to increase the line number
in get_value() after the callback function returned an error.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When discovering a .git/ directory, we take pains to ensure that its
repository format version matches Git's expectations, and we return NULL
otherwise.
However, we still appended the invalid path to the strbuf passed as
argument.
Let's just reset the strbuf to the state before we appended the .git/
directory that was eventually rejected.
There is another early return path in that function, when
setup_git_directory_gently_1() returns GIT_DIR_NONE or an error. In that
case, the gitdir parameter has not been touched, therefore there is no
need for an equivalent change in that code path.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The diff-so-fancy project is also written in perl, and most
of its users pipe diffs through both diff-highlight and
diff-so-fancy. It would be nice if this could be done in a
single script. So let's pull most of diff-highlight's code
into its own module which can be used by diff-so-fancy.
In addition, we'll abstract a few basic items like reading
from stdio so that a script using the module can do more
processing before or after diff-highlight handles the lines.
See the README update for more details.
One small downside is that the diff-highlight script must
now be built using the Makefile. There are ways around this,
but it quickly gets into perl arcana. Let's go with the
simple solution. As a bonus, our Makefile now respects the
PERL_PATH variable if it is set.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
b9c6232138 (--format=pretty: avoid calculating expensive expansions
twice) optimized adding short hashes multiple times by using the
fact that the output strbuf was only ever simply appended to and
copying the added string from the previous run. That prerequisite
is no longer given; we now have modfiers like %< and %+ that can
cause the cache to lose track of the correct offsets. Remove it.
Reported-by: Michael Giuffrida <michaelpg@chromium.org>
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When illustrating how to normalize the line endings, the
documentation in gitattributes tells the user to `rm .git/index`.
This is incorrect for two reasons:
- Users shouldn't be instructed to mess around with the internal
implementation of Git using raw file system tools like `rm`.
- Within a submodule or an additional working tree `.git` is just a
file containing a `gitdir: <path>` pointer into the real `.git`
directory. Therefore `rm .git/index` does not work.
The purpose of the `rm .git/index` instruction is to remove all entries
from the index without touching the working tree. The way to do this
with Git is to use `read-tree --empty`.
Signed-off-by: Andreas Heiduk <asheiduk@gmail.com>
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
perf-test update.
* jh/memihash-opt:
p0004: don't error out if test repo is too small
p0004: don't abort if multi-threaded is too slow
p0004: use test_perf
p0004: avoid using pipes
p0004: simplify calls of test-lazy-init-name-hash
"git pull --rebase --autostash" didn't auto-stash when the local history
fast-forwards to the upstream.
* tb/pull-ff-rebase-autostash:
pull: ff --rebase --autostash works in dirty repo
The timestamp of the index file is now taken after the file is
closed, to help Windows, on which a stale timestamp is reported by
fstat() on a file that is opened for writing and data was written
but not yet closed.
* jh/close-index-before-stat:
read-cache: close index.lock in do_write_index
"git clean -d" used to clean directories that has ignored files,
even though the command should not lose ignored ones without "-x".
"git status --ignored" did not list ignored and untracked files
without "-uall". These have been corrected.
* sl/clean-d-ignored-fix:
clean: teach clean -d to preserve ignored paths
dir: expose cmp_name() and check_contains()
dir: hide untracked contents of untracked dirs
dir: recurse into untracked dirs for ignored files
t7061: status --ignored should search untracked dirs
t7300: clean -d should skip dirs with ignored files
