The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The write(2) emulation for Windows learned to set errno to EPIPE
when necessary.
* js/emu-write-epipe-on-windows:
mingw: emulate write(2) that fails with a EPIPE
"format-patch" has learned a new option to zero-out the commit
object name on the mbox "From " line.
* bc/format-patch-null-from-line:
format-patch: check that header line has expected format
format-patch: add an option to suppress commit hash
sha1_file.c: introduce a null_oid constant
When getpwuid() on the system returned NULL (e.g. the user is not
in the /etc/passwd file or other uid-to-name mappings), the
codepath to find who the user is to record it in the reflog barfed
and died. Loosen the check in this codepath, which already accepts
questionable ident string (e.g. host part of the e-mail address is
obviously bogus), and in general when we operate fmt_ident() function
in non-strict mode.
* jk/ident-loosen-getpwuid:
ident: loosen getpwuid error in non-strict mode
ident: keep a flag for bogus default_email
ident: make xgetpwuid_self() a static local helper
The completion script (in contrib/) used to list "git column"
(which is not an end-user facing command) as one of the choices
* sg/completion-no-column:
completion: remove 'git column' from porcelain commands
Add new config to avoid typing "--recurse-submodules" on each push.
* mc/push-recurse-submodules-config:
push: follow the "last one wins" convention for --recurse-submodules
push: test that --recurse-submodules on command line overrides config
push: add recurseSubmodules config option
On Windows, when writing to a pipe fails, errno is always
EINVAL. However, Git expects it to be EPIPE.
According to the documentation, there are two cases in which write()
triggers EINVAL: the buffer is NULL, or the length is odd but the mode
is 16-bit Unicode (the broken pipe is not mentioned as possible cause).
Git never sets the file mode to anything but binary, therefore we know
that errno should actually be EPIPE if it is EINVAL and the buffer is
not NULL.
See https://msdn.microsoft.com/en-us/library/1570wh78.aspx for more
details.
This works around t5571.11 failing with v2.6.4 on Windows.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Acked-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* git://ozlabs.org/~paulus/gitk:
gitk: sv.po: Update Swedish translation (311t)
gitk: Let .bleft.mid widgets 'breathe'
gitk: Match ttk fonts to gitk fonts
gitk: Update revision date in Japanese PO file
gitk: Update "Language:" header
gitk: Improve translation message
gitk: Remove unused line
gitk: Update year
gitk: Change last translator line
gitk: Update fuzzy messages
gitk: Update Japanese translation
gitk: Fix translation around copyright sign
gitk: Update Japanese translation
gitk: Fix wrong translation
gitk: Translate Japanese catalog
gitk: Translate more to Japanese catalog
gitk: Update Japanese message catalog
gitk: Re-sync line number in Japanese message catalogue
gitk: Color name update
"git rebase -i" started with merge strategy options did not
propagate them upon "git rebase --continue".
* fr/rebase-i-continue-preserve-options:
rebase -i: remember merge options beyond continue actions
The format of the "From " header line is very specific to allow
utilities to detect Git-style patches. Add a test that the patches
created are in the expected format.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Oftentimes, patches created by git format-patch will be stored in
version control or compared with diff. In these cases, two otherwise
identical patches can have different commit hashes, leading to diff
noise. Teach git format-patch a --zero-commit option that instead
produces an all-zero hash to avoid this diff noise.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The exit code of git-fsck didnot reflect some types of errors found
in packed objects, which has been corrected.
* dt/fsck-verify-pack-error:
verify_pack: do not ignore return value of verification function
"git p4" used to import Perforce CLs that touch only paths outside
the client spec as empty commits. It has been corrected to ignore
them instead, with a new configuration git-p4.keepEmptyCommits as a
backward compatibility knob.
* ls/p4-keep-empty-commits:
git-p4: add option to keep empty commits
The helper used to iterate over loose object directories to prune
stale objects did not closedir() immediately when it is done with a
directory--a callback such as the one used for "git prune" may want
to do rmdir(), but it would fail on open directory on platforms
such as WinXP.
* jk/prune-mtime:
prune: close directory earlier during loose-object directory traversal
"git p4" used to import Perforce CLs that touch only paths outside
the client spec as empty commits. It has been corrected to ignore
them instead, with a new configuration git-p4.keepEmptyCommits as a
backward compatibility knob.
* ls/p4-keep-empty-commits:
git-p4: add option to keep empty commits
The helper used to iterate over loose object directories to prune
stale objects did not closedir() immediately when it is done with a
directory--a callback such as the one used for "git prune" may want
to do rmdir(), but it would fail on open directory on platforms
such as WinXP.
* jk/prune-mtime:
prune: close directory earlier during loose-object directory traversal
Completing unstuck form of email aliases doesn't quite work:
$ git send-email --to <TAB>
alice bob cecil
$ git send-email --to a<TAB>
alice bob cecil
While listing email aliases works as expected, the second case should
just complete to 'alice', but it keeps offering all email aliases
instead.
The cause for this behavior is that in this case we mistakenly tell
__gitcomp() explicitly that the current word to be completed is empty,
while in reality it is not. As a result __gitcomp() doesn't filter
out non-matching aliases, so all aliases end up being offered over and
over again.
Fix this by not passing the current word to be completed to
__gitcomp() and letting it go the default route and grab it from the
'$cur' variable. Don't pass empty prefix either, because it's assumed
to be empty when unspecified, so it's not necessary.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
null_oid is the struct object_id equivalent to null_sha1.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 00bce77 (ident.c: add support for IPv6, 2015-11-27)
moved the "gethostbyname" call out of "add_domainname" and
into the helper function "canonical_name". But when moving
the code, it forgot that the "buf" variable is passed as
"host" in the helper.
Reported-by: johan defries <johandefries@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the user has not specified an identity and we have to
turn to getpwuid() to find the username or gecos field, we
die immediately when getpwuid fails (e.g., because the user
does not exist). This is OK for making a commit, where we
have set IDENT_STRICT and would want to bail on bogus input.
But for something like a reflog, where the ident is "best
effort", it can be pain. For instance, even running "git
clone" with a UID that is not in /etc/passwd will result in
git barfing, just because we can't find an ident to put in
the reflog.
Instead of dying in xgetpwuid_self, we can instead return a
fallback value, and set a "bogus" flag. For the username in
an email, we already have a "default_email_is_bogus" flag.
For the name field, we introduce (and check) a matching
"default_name_is_bogus" flag. As a bonus, this means you now
get the usual "tell me who you are" advice instead of just a
"no such user" error.
No tests, as this is dependent on configuration outside of
git's control. However, I did confirm that it behaves
sensibly when I delete myself from the local /etc/passwd
(reflogs get written, and commits complain).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The widgets on top of the diff window are very tightly packed. Make
them breathe a little by adding an 'i'-spaced padding between them.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
The fonts set in setoptions aren't consistently picked up by ttk, which
uses its own predefined fonts. This is noticeable when switching
between using and not using ttk with custom fonts or in HiDPI settings
(where the default TTK fonts do _not_ respect tk sclaing).
Fix by mapping the ttk fontset to the one used by gitk internally.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
If the user explicitly specified a merge strategy or strategy
options, continue to use that strategy/option after
"rebase --continue". Add a test of the corrected behavior.
If --merge is specified or implied by -s or -X, then "strategy and
"strategy_opts" are set to values from which "strategy_args" can be
derived; otherwise they are set to empty strings. Either way,
their values are propagated from one step of an interactive rebase
to the next via state files.
"do_merge", on the other hand, is *not* propagated to later steps of
an interactive rebase. Therefore, making the initialization of
"strategy_args" conditional on "do_merge" being set prevents later
steps of an interactive rebase from setting it correctly.
Luckily, we don't need the "do_merge" guard at all. If the rebase
was started without --merge, then "strategy" and "strategy_opts"
are both the empty string, which results in "strategy_args" also
being set to the empty string, which is just what we want in that
situation. So remove the "do_merge" guard and derive
"strategy_args" from "strategy" and "strategy_opts" every time.
Reported-by: Diogo de Campos <campos@esss.com.br>
Signed-off-by: Fabian Ruch <bafain@gmail.com>
Helped-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Ralf Thielow <ralf.thielow@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git column' is an internal helper, so it should not be offered on
'git <TAB>' along with porcelain commands.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This back-merges hopefully the last batch of trivially correct fixes
to the 2.6.x maintenance track from the master branch.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
mark_tree_uninteresting() has code to handle the case where it gets
passed a NULL pointer in its 'tree' parameter, but the function had
'object = &tree->object' assignment before checking if tree is
NULL. This gives a compiler an excuse to declare that tree will
never be NULL and apply a wrong optimization. Avoid it.
* sn/null-pointer-arith-in-mark-tree-uninteresting:
revision.c: fix possible null pointer arithmetic
