When a directory is not readable, "gitweb" fails to build the
project list. Work this around by skipping such a directory.
It might end up hiding a problem under the rug and a better
solution might be to loudly complain to the administrator pointing
out the problematic directory, but this will at least make it
"work".
* hb/gitweb-project-list:
gitweb: skip unreadable subdirectories
"git commit" when seeing an totally empty message said "you did not
edit the message", which is clearly wrong. The message has been
corrected.
* ks/commit-abort-on-empty-message-fix:
commit: check for empty message before the check for untouched template
Numerous bugs in walking of reflogs via "log -g" and friends have
been fixed.
* jk/reflog-walk:
reflog-walk: apply --since/--until to reflog dates
reflog-walk: stop using fake parents
rev-list: check reflog_info before showing usage
get_revision_1(): replace do-while with an early return
log: do not free parents when walking reflog
log: clarify comment about reflog cycles
revision: disallow reflog walking with revs->limited
t1414: document some reflog-walk oddities
The http.{sslkey,sslCert} configuration variables are to be
interpreted as a pathname that honors "~[username]/" prefix, but
weren't, which has been fixed.
* jc/http-sslkey-and-ssl-cert-are-paths:
http.c: http.sslcert and http.sslkey are both pathnames
"%C(color name)" in the pretty print format always produced ANSI
color escape codes, which was an early design mistake. They now
honor the configuration (e.g. "color.ui = never") and also tty-ness
of the output medium.
* jk/ref-filter-colors:
ref-filter: consult want_color() before emitting colors
pretty: respect color settings for %C placeholders
rev-list: pass diffopt->use_colors through to pretty-print
for-each-ref: load config earlier
color: check color.ui in git_default_config()
ref-filter: pass ref_format struct to atom parsers
ref-filter: factor out the parsing of sorting atoms
ref-filter: make parse_ref_filter_atom a private function
ref-filter: provide a function for parsing sort options
ref-filter: move need_color_reset_at_eol into ref_format
ref-filter: abstract ref format into its own struct
ref-filter: simplify automatic color reset
t: use test_decode_color rather than literal ANSI codes
docs/for-each-ref: update pointer to color syntax
check return value of verify_ref_format()
Because recent Git for Windows do come with a real msgfmt, the
build procedure for git-gui has been updated to use it instead of a
hand-rolled substitute.
* js/git-gui-msgfmt-on-windows:
git-gui (MinGW): make use of MSys2's msgfmt
git gui: allow for a long recentrepo list
git gui: de-dup selected repo from recentrepo history
git gui: cope with duplicates in _get_recentrepo
git-gui: remove duplicate entries from .gitconfig's gui.recentrepo
These used to be for manipulating the in-memory repo_tree structure,
but nowadays they are convenience wrappers to handle a few git-vs-svn
mismatches:
1. Git does not track empty directories but Subversion does. When
looking up a path in git that Subversion thinks exists and finding
nothing, we can safely assume that the path represents a
directory. This is needed when a later Subversion revision
modifies that directory.
2. Subversion allows deleting a file by copying. In Git fast-import
we have to handle that more explicitly as a deletion.
These are details of the tool's interaction with git fast-import.
Move them to fast_export.c, where other such details are handled.
This way the function names do not start with a repo_ prefix that
would clash with the repository object introduced in
v2.14.0-rc0~38^2~16 (repository: introduce the repository object,
2017-06-22) or an svn_ prefix that would clash with libsvn (in case
someone wants to link this code with libsvn some day).
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since v1.7.10-rc0~118^2~4^2~4^2~3 (vcs-svn: pass paths through to
fast-import, 2010-12-13) this is an alias for fast_export_delete.
Remove the unnecessary layer of indirection.
No functional change intended.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the rest of Git, these modes are spelled as S_IFDIR,
S_IFREG | 0644, S_IFREG | 0755, and S_IFLNK. Use the same constants
in svn-fe for simplicity and consistency.
No functional change intended.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
I forgot to remove these in v1.7.10-rc0~118^2~4^2~5^2~4 (vcs-svn:
eliminate repo_tree structure, 2010-12-10).
This finishes what was started in commit 36f63b50 (vcs-svn: remove
unused prototypes, 2017-08-21).
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation for pack-objects describes that it creates "a packed
archive of objects", which is confusing because it may create multiple
packs if --max-pack-size is set. Update the documentation to clarify
this, and explaining in which cases such a feature would be useful.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the `git merge` process is killed while waiting for the editor to
finish, the merge state is lost but the prepared merge msg and tree is kept.
So, a subsequent `git commit` creates a squashed merge even when the
user asked for proper merge commit originally.
Demonstrate the problem with a test crafted after the in t7502. The test
requires EXECKEEPSPID (thus does not run under MINGW).
Save the merge state earlier (in the non-squash case) so that it does
not get lost. This makes the test pass.
Reported-by: hIpPy <hippy2981@gmail.com>
Signed-off-by: Michael J Gruber <git@grubix.eu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
write_merge_state() writes out the merge heads, mode, and msg. But we
may want to write out heads, mode without the msg. So, split out heads
(+mode) into a separate function write_merge_heads() that is called by
write_merge_state().
No funtional change so far, except when these non-atomic writes are
interrupted: we write heads-mode-msg now when we used to write
heads-msg-mode.
Signed-off-by: Michael J Gruber <git@grubix.eu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
prepare_to_commit() cannot be reached in the non-squash case:
It is called by merge_trivial() and finish_automerge() only, but the
calls to the latter are somewhat hard to track:
If option_commit is not set, the code in cmd_merge() uses a fake
conflict return code (ret=1) to avoid writing the tree, which also
avoids setting automerge_was_ok (just as in the proper ret==1 case), so
that finish_automerge() is not called.
To ensure that no code change breaks that assumption, safe-guard
prepare_to_commit() by a BUG() statement.
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Michael J Gruber <git@grubix.eu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, 'git merge --continue' is mentioned but not explained.
Explain it.
Signed-off-by: Michael J Gruber <git@grubix.eu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There were several functions in the Subversion code that started with
"repo_". This namespace is also used by the Git struct repository code.
Rename these functions to start with "svn_repo" to avoid any future
conflicts.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Subversion code had prototypes for several functions which were not
ever defined or used. These functions all had names starting with
"repo_", some of which conflict with those in repository.h. To avoid
the conflict, remove those unused prototypes.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Saying "the this" is an obvious typo. But while we're here,
let's polish the English on the second half of the sentence,
too.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a file had been commited with CRLF but now .gitattributes say
"* text=auto" (or core.autocrlf is true), the following does not
roundtrip, `git apply` fails:
printf "Added line\r\n" >>file &&
git diff >patch &&
git checkout -- . &&
git apply patch
Before applying the patch, the file from working tree is converted
into the index format (clean filter, CRLF conversion, ...). Here,
when commited with CRLF, the line endings should not be converted.
Note that `git apply --index` or `git apply --cache` doesn't call
convert_to_git() because the source material is already in index
format.
Analyze the patch if there is a) any context line with CRLF, or b)
if any line with CRLF is to be removed. In this case the patch file
`patch` has mixed line endings, for a) it looks like this:
diff --git a/one b/one
index 533790e..c30dea8 100644
--- a/one
+++ b/one
@@ -1 +1,2 @@
a\r
+b\r
And for b) it looks like this:
diff --git a/one b/one
index 533790e..485540d 100644
--- a/one
+++ b/one
@@ -1 +1 @@
-a\r
+b\r
If `git apply` detects that the patch itself has CRLF, (look at the
line " a\r" or "-a\r" above), the new flag crlf_in_old is set in
"struct patch" and two things will happen:
- read_old_data() will not convert CRLF into LF by calling
convert_to_git(..., SAFE_CRLF_KEEP_CRLF);
- The WS_CR_AT_EOL bit is set in the "white space rule",
CRLF are no longer treated as white space.
While at there, make it clear that read_old_data() in apply.c knows
what it wants convert_to_git() to do with respect to CRLF. In fact,
this codepath is about applying a patch to a file in the filesystem,
which may not exist in the index, or may exist but may not match
what is recorded in the index, or in the extreme case, we may not
even be in a Git repository. If convert_to_git() peeked at the
index while doing its work, it *would* be a bug.
Pass NULL instead of &the_index to convert_to_git() to make sure we
catch future bugs to clarify this.
Update the test in t4124: split one test case into 3:
- Detect the " a\r" line in the patch
- Detect the "-a\r" line in the patch
- Use LF in repo and CLRF in the worktree.
Reported-by: Anthony Sottile <asottile@umich.edu>
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
53b2c823f6 (revision walker: mini clean-up) added the function in 2007,
but it was never used, so we should be able to get rid of it now.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reject directories with the attribute export-ignore already while
queuing them. This prevents read_tree_recursive() from descending into
them and this avoids write_archive_entry() rejecting them later on,
which queue_or_write_archive_entry() is not prepared for.
Borrow the existing strbuf to build the full path to avoid string
copies and extra allocations; just make sure we restore the original
value before moving on.
Keep checking any other attributes in write_archive_entry() as before,
but avoid checking them twice.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add helpers for accessing attributes that encapsulate the details of how
to retrieve their values.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Demonstrate mishandling of the attribute export-ignore by git archive
when used together with pathspecs. Wildcard pathspecs can even cause it
to abort. And a directory excluded without a wildcard is still included
as an empty folder in the archive.
Test-case-by: David Adam <zanchey@ucc.gu.uwa.edu.au>
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
`*` in format strings means peeling of tag objects so that object field
names refer to the object that the tag object points at, instead of the
tag object itself.
Currently, this is documented using grammar that is clearly inspired by
classical latin, though missing more than an article in order to be
classical english.
Try and straighten that explanation out a bit.
Signed-off-by: Michael J Gruber <git@grubix.eu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Various commands list refs and allow to use a format string for the
output that interpolates from the ref as well as the object it points
at (for-each-ref; branch and tag in list mode).
Currently, the documentation talks about interpolating from the object.
This is confusing because a ref points to an object but not vice versa,
so the object cannot possible know %(refname), for example. Thus, this is
wrong independent of refs being objects (one day, maybe) or not.
Change the wording to make this clearer (and distinguish it from formats
for the log family).
Signed-off-by: Michael J Gruber <git@grubix.eu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The handling of `status_only` no longer interferes with the handling of
`unmatch_name_only`. `--quiet` no longer affects the exit code when using
`-L`/`--files-without-match`.
Signed-off-by: Anthony Sottile <asottile@umich.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This could have been part of 48308681b0 (git submodule update: have a
dedicated helper for cloning, 2016-02-29).
Signed-off-by: Stefan Beller <sbeller@google.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When convert_to_git() is called, the caller may want to keep CRLF to
be kept as CRLF (and not converted into LF).
This will be used in the next commit, when apply works with files
that have CRLF and patches are applied onto these files.
Add the new value "SAFE_CRLF_KEEP_CRLF" to safe_crlf.
Prepare convert_to_git() to be able to run the clean filter, skip
the CRLF conversion and run the ident filter.
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In handshake_capabilities() we use warning() when a capability
is not supported, so the exit code of the function is 0 and no
further error is shown. This is a problem because the warning
message doesn't tell us which subprocess cmd failed.
On the contrary if we cannot write a packet from this function,
we use error() and then subprocess_start() outputs:
initialization for subprocess '<cmd>' failed
so we can know which subprocess cmd failed.
Let's improve the warning() message, so that we can know which
subprocess cmd failed.
Helped-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
read_info_alternates is not used from outside, so let's make it static.
We have to declare the function before link_alt_odb_entry instead of
moving the code around, link_alt_odb_entry calls read_info_alternates,
which in turn calls link_alt_odb_entry.
Signed-off-by: Stefan Beller <sbeller@google.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
sum(1) is a command for calculating checksums of the contents of files.
It was part of early editions of Unix ("Research Unix", 1972/1973, [1]).
cksum(1) appeared in 4.4BSD (1993) as a replacement [2], and became part
of POSIX.1-2008 [3]. OpenBSD 5.6 (2014) removed sum(1).
We only use sum(1) in t1002 to check for changes in three files. On
MinGW we use md5sum(1) instead. We could switch to the standard command
cksum(1) for all platforms; MinGW comes with GNU coreutils now, which
provides sum(1), cksum(1) and md5sum(1). Use our standard method for
checking for file changes instead: test_cmp.
It's more convenient because it shows differences nicely, it's faster on
MinGW because we have a special implementation there based only on
shell-internal commands, it's simpler as it allows us to avoid stripping
out unnecessary entries from the checksum file using grep(1), and it's
more consistent with the rest of the test suite.
We already compare changed files with their expected new contents using
diff(1), so we don't need to check with "test_must_fail test_cmp" if
they differ from their original state. A later patch could convert the
direct diff(1) calls to test_cmp as well.
With all sum(1) calls gone, remove the MinGW-specific implementation
from test-lib.sh as well.
[1] http://minnie.tuhs.org/cgi-bin/utree.pl?file=V3/man/man1/sum.1
[2] http://minnie.tuhs.org/cgi-bin/utree.pl?file=4.4BSD/usr/share/man/cat1/cksum.0
[3] http://pubs.opengroup.org/onlinepubs/9699919799/utilities/cksum.html
Signed-off-by: René Scharfe <l.s.r@web.de>
Reviewed-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
`git config --bool xxx.yyy` returns `true` for `[xxx]yyy` but
`false` for `[xxx]yyy=` or `[xxx]yyy=""`. This is tested in
t1300-repo-config.sh since 09bc098c2.
Signed-off-by: Andreas Heiduk <asheiduk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `no_changes` function calls the `untracked_files` function through
command substitution. `untracked_files` will return null bytes because it
runs ls-files with the '-z' option.
Bash since version 4.4 warns about these null bytes. As they are not
required for the test that is being done, make sure `untracked_files`
does not output null bytes when not required.
This is achieved by adding a parameter to the `untracked_files` function to
specify wither `-z` should be passed to ls-files or not.
This warning is triggered when running git stash save -u resulting in
two warnings:
git-stash: line 43: warning: command substitution: ignored null byte
in input
Signed-off-by: Kevin Daudt <me@ikke.info>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When unpack_entry() encounters a broken packed object, it returns early.
It adjusts the reference count of the pack window, but leaks the buffer
for a big delta stack in case the small automatic one was not enough.
Jump to the cleanup code at end instead, which takes care of that.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the code for releasing tree buffers and commit buffers in
fsck_obj() to the end of the function and make sure it's executed no
matter of an error is encountered or not.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
getdelim(3) returns -1 at the end of the file and if it encounters an
error, but sets errno only in the latter case. Set errno to zero before
calling it to avoid misdiagnosing an out-of-memory condition due to a
left-over value from some other function call.
Reported-by: Yaroslav Halchenko <yoh@onerussian.com>
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If realloc() fails then the original buffer is still valid. Free it
before exiting the function.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Get rid of a magic string length constant by using skip_prefix() instead
of starts_with().
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Long ago in 628522ec14 (sha1-lookup: more memory efficient
search in sorted list of SHA-1, 2007-12-29) we added
sha1_entry_pos(), a binary search that uses the uniform
distribution of sha1s to scale the selection of mid-points.
As this was a performance experiment, we tied it to the
GIT_USE_LOOKUP environment variable and never enabled it by
default.
This code was successful in reducing the number of steps in
each search. But the overhead of the scaling ends up making
it slower when the cache is warm. Here are best-of-five
timings for running rev-list on linux.git, which will have
to look up every object:
$ time git rev-list --objects --all >/dev/null
real 0m35.357s
user 0m35.016s
sys 0m0.340s
$ time GIT_USE_LOOKUP=1 git rev-list --objects --all >/dev/null
real 0m37.364s
user 0m37.045s
sys 0m0.316s
The USE_LOOKUP version might have more benefit on a cold
cache, as the time to fault in each page would dominate. But
that would be for a single lookup. In practice, most
operations tend to look up many objects, and the whole pack
.idx will end up warm.
It's possible that the code could be better optimized to
compete with a naive binary search for the warm-cache case,
and we could have the best of both worlds. But over the
years nobody has done so, and this is largely dead code that
is rarely run outside of the test suite. Let's drop it in
the name of simplicity.
This lets us remove sha1_entry_pos() entirely, as the .idx
lookup code was the only caller. Note that sha1-lookup.c
still contains sha1_pos(), which differs from
sha1_entry_pos() in two ways:
- it has a different interface; it uses a function pointer
to access sha1 entries rather than a size/offset pair
describing the table's memory layout
- it only scales the initial selection of "mi", rather
than each iteration of the search
We can't get rid of this function, as it's called from
several places. It may be that we could replace it with a
simple binary search, but that's out of scope for this patch
(and would need benchmarking).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 1a812f3a70 (hashcmp(): inline memcmp() by hand to
optimize, 2011-04-28), it was reported that an open-coded
loop outperformed memcmp() for comparing sha1s.
Discussion[1] a few years later in 2013 showed that this
depends on your libc's version of memcmp(). In particular,
glibc 2.13 optimized their memcmp around 2011. Here are
current timings with glibc 2.24 (best-of-five, on
linux.git):
[before this patch, open-coded]
$ time git rev-list --objects --all
real 0m35.357s
user 0m35.016s
sys 0m0.340s
[after this patch, memcmp]
real 0m32.930s
user 0m32.630s
sys 0m0.300s
Now that we've had 6 years for that version of glibc to
make its way onto people's machines, it's worth revisiting
our benchmarks and switching to memcmp().
It may be that there are other non-glibc systems where
memcmp() isn't as well optimized. But since our single data
point in favor of open-coding was on a now-ancient glibc, we
should probably assume the system memcmp is good unless
proven otherwise. We may end up with a SLOW_MEMCMP Makefile
knob, but we can hold off on that until we actually find
such a system in practice.
[1] https://public-inbox.org/git/20130318073229.GA5551@sigill.intra.peff.net/
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use a NULL-and-NUL check to see if we have a prefix and consistently use
C string functions on it instead of storing its length in a member of
struct apply_state. This avoids strlen() calls and simplifies the code.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In addition to adding the missing newline, add the x-ecutable bit
'mode change' character to the error message. This message now has
the same form as similar messages output by 'update-index'.
Signed-off-by: Ramsay Jones <ramsay@ramsayjones.plus.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
find_pack_entry_one() uses the fan-out table of pack indexes to find out
which entries match the first byte of the searched hash and does a
binary search on this subset of the main index table.
If there are no matching entries then lo and hi will have the same
value. The binary search still starts and compares the hash of the
following entry (which has a non-matching first byte, so won't cause any
trouble), or whatever comes after the sorted list of entries.
The probability of that stray comparison matching by mistake is low, but
let's not take any chances and check when entering the binary search
loop if we're actually done already.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
OpenBSD's regex library has a repetition limit (RE_DUP_MAX) of 255.
That's the minimum acceptable value according to POSIX. In t4062 we use
4096 repetitions in the test "-G matches", though, causing it to fail.
Combine two repetition operators, both less than 256, to arrive at 4096
zeros instead of using a single one, to fix the test on OpenBSD.
Original-patch-by: David Coppa <dcoppa@openbsd.org>
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
76e368c378 (t3700: fix broken test under !SANITY) explains that the test
'git add --chmod=[+-]x changes index with already added file' can fail
if xfoo3 is still present as a symlink from a previous test and deletes
it with rm(1). That still leaves it present in the index, which causes
the test to fail if POSIXPERM is not defined. Get rid of it by calling
"git reset --hard" as well, as 76e368c378 already mentioned in passing.
Helped-by: Adam Dinwoodie <adam@dinwoodie.org>
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If there was no 'Signed-off-by:' trailer but another trailer such as
'Reported-by:' then 'git am --signoff' would add a blank line between
the existing trailers and the added 'Signed-off-by:' line. e.g.
Rebase accepts '--rerere-autoupdate' as an option but only honors
it if '-m' is also given. Fix it for a non-interactive rebase by
passing on the option to 'git am' and 'git cherry-pick'.
Reported-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Fix by using the code provided for this purpose in sequencer.c.
Change the tests so that they check the formatting of the
'Signed-off-by:' lines rather than just grepping for them.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In parse_svn_date() prepend the correct UTC offset to the timestamp
returned. This is the offset in effect at the commit time instead of
the offset in effect at calling time.
Signed-off-by: Urs Thuermann <urs@isnogud.escape.de>
Reviewed-by: Eric Wong <e@80x24.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We want to make sure that people who copy & paste code would see
fewer instances of "git-foo". The use of these dashed forms have
been discouraged since v1.6.0 days.
Signed-off-by: Michael Forney <mforney@mforney.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
