One of the tests in t5319 corrupts the checksum of the midx file by
writing a single 0xff over the final byte, and then confirms that we
detect the problem. This usually works fine, but would break if the
actual checksum ended with that same byte already.
It seems like this should happen in 1 out of 256 test runs, but it turns
out to be less often in practice. The contents of the midx are mostly
deterministic because it's based on the objects, and we remove most
sources of randomness by setting GIT_COMMITTER_DATE, etc. However,
there's still some randomness: some objects are duplicated between
packs, and the midx must decide which to use, which can be based on
timing.
So very occasionally we can end up with a real 0xff byte, and the test
fails. The most robust fix would be to read out the final byte and then
change it to something else (e.g., adding 1 mod 256). But that's awkward
to do in shell. Let's just blindly corrupt 10 bytes instead of 1, which
reduces our chances of an accidental noop to 1 in 2^80.
Reported-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "checkout" command is one of the main sources of leaks in the test
suite, let's fix the common ones by not leaking from the "struct
branch_info".
Doing this is rather straightforward, albeit verbose, we need to
xstrdup() constant strings going into the struct, and free() the ones
we clobber as we go along.
This also means that we can delete previous partial leak fixes in this
area, i.e. the "path_to_free" accounting added by 96ec7b1e70 (Convert
resolve_ref+xstrdup to new resolve_refdup function, 2011-12-13).
There was some discussion about whether "we should retain the "const
char *" here and cast at free() time, or have it be a "char *". Since
this is not a public API with any sort of API boundary let's use
"char *", as is already being done for the "refname" member of the
same struct.
The tests to mark as passing were found with:
rm .prove; GIT_SKIP_TESTS=t0027 prove -j8 --state=save t[0-9]*.sh :: --immediate
# apply & compile this change
prove -j8 --state=failed :: --immediate
I.e. the ones that were newly passing when the --state=failed command
was run. I left out "t3040-subprojects-basic.sh" and
"t4131-apply-fake-ancestor.sh" to to optimization-level related
differences similar to the ones noted in[1], except that these would
be something the current 'linux-leaks' job would run into.
1. https://lore.kernel.org/git/cover-v3-0.6-00000000000-20211022T175227Z-avarab@gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use size_t to match n when building the bitmask for checking whether a
rank is occupied, instead of the default signed int.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is a formatting issue in "multi-pack-index.html", corresponding
to the nesting bulleted list of a wrong usage in "multi-pack-index.txt"
and this commit fix the problem.
In ASCIIDOC, it doesn't treat an indented character as the
beginning of a sub-list. If we want to write a nested bulleted list, we
could just use ASTERISK without any DASH like:
"
* Level 1 list item
** Level 2 list item
*** Level 3 list item
** Level 2 list item
* Level 1 list item
** Level 2 list item
* Level 1 list item
"
The DASH can be used for bulleted list too, But the DASH is suggested
only to be used as the marker for the first level because the DASH
doesn’t work well or a best practice for nested lists,
like (dash is as level 2 below):
"
* Level 1 list item
- Level 2 list item
* Level 1 list item
"
ASTERISK is recommanded to use because it works intuitively and clearly
("marker length = nesting level") in nested lists, but the DASH can't.
However, when you want to write a non-nested bulleted lists, DASH works
too, like:
"
- Level 1 list item
- Level 1 list item
- Level 1 list item
"
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Reviewed-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Teng Long <dyroneteng@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A superfluous ']' was added to the title of the GitHub CI section in
f003a91f5c (SubmittingPatches: replace discussion of Travis with GitHub
Actions, 2021-07-22). Remove it.
While at it, format the URL for a GitHub user's workflow runs of Git
between backticks, since if not Asciidoc formats only the first part,
"https://github.com/<Your", as a link, which is not very useful.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When checking typos in file "po/ko.po", "git-po-helper" reports lots of
false positives because there are no spaces between ASCII and Korean
characters. After applied commit adee197 "(dict: add smudge table for
Korean language, 2021-11-11)" of "git-l10n/git-po-helper" to suppress
these false positives, some easy-to-fix typos are found and fixed.
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
When we added a new event type to trace2 event stream, we forgot to
raise the format version number, which has been corrected.
* js/trace2-raise-format-version:
trace2: increment event format version
Regression fix.
* ab/fsck-unexpected-type:
object-file: free(*contents) only in read_loose_object() caller
object-file: fix SEGV on free() regression in v2.34.0-rc2
In 64bc752 (trace2: add trace2_child_ready() to report on background
children, 2021-09-20), we added a new "child_ready" event. In
Documentation/technical/api-trace2.txt, we promise that adding a new
event type will result in incrementing the trace2 event format version
number, but this was not done. Correct this in code & docs.
Signed-off-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current protocol EBNF allows command-request to end with the
capability list, if no command specific arguments follow, but the
protocol requires that after the capability list, there must be a
delim-pkt regardless of the number of command specific arguments. Fixed
the EBNF to match. Both JGit and libgit2's implementation has the
delim-pkt as mandatory. JGit's code is not publicly linkable, but
libgit2 is linked below[1]. As for currently implemented commands on v2
(ls-ref and fetch), the delim packet is already being passed through
[1]: https://github.com/libgit2/libgit2/blob/main/src/transports/git.c
Reported-by: Ivan Frade <ifrade@google.com>
Signed-off-by: Calvin Wan <calvinwan@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the preceding commit a free() of uninitialized memory regression in
96e41f58fe (fsck: report invalid object type-path combinations,
2021-10-01) was fixed, but we'd still have an issue with leaking
memory from fsck_loose(). Let's fix that issue too.
That issue was introduced in my 31deb28f5e (fsck: don't hard die on
invalid object types, 2021-10-01). It can be reproduced under
SANITIZE=leak with the test I added in 093fffdfbe (fsck tests: add
test for fsck-ing an unknown type, 2021-10-01):
./t1450-fsck.sh --run=84 -vixd
In some sense it's not a problem, we lost the same amount of memory in
terms of things malloc'd and not free'd. It just moved from the "still
reachable" to "definitely lost" column in valgrind(1) nomenclature[1],
since we'd have die()'d before.
But now that we don't hard die() anymore in the library let's properly
free() it. Doing so makes this code much easier to follow, since we'll
now have one function owning the freeing of the "contents" variable,
not two.
For context on that memory management pattern the read_loose_object()
function was added in f6371f9210 (sha1_file: add read_loose_object()
function, 2017-01-13) and subsequently used in c68b489e56 (fsck:
parse loose object paths directly, 2017-01-13). The pattern of it
being the task of both sides to free() the memory has been there in
this form since its inception.
1. https://valgrind.org/docs/manual/mc-manual.html#mc-manual.leaks
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This reverts commit f45022dc2f,
as this is like breakage in the traversal more likely. In a
history with 10 single strand of pearls,
1-->2-->3--...->7-->8-->9-->10
asking "rev-list --unsorted-input 1 10 --not 9 8 7 6 5 4" fails to
paint the bottom 1 uninteresting as the traversal stops, without
completing the propagation of uninteresting bit starting at 4 down
through 3 and 2 to 1.
Fix a regression introduced in my 96e41f58fe (fsck: report invalid
object type-path combinations, 2021-10-01). When fsck-ing blobs larger
than core.bigFileThreshold, we'd free() a pointer to uninitialized
memory.
This issue would have been caught by SANITIZE=address, but since it
involves core.bigFileThreshold, none of the existing tests in our test
suite covered it.
Running them with the "big_file_threshold" in "environment.c" changed
to say "6" would have shown this failure, but let's add a dedicated
test for this scenario based on Han Xin's report[1].
The bug was introduced between v9 and v10[2] of the fsck series merged
in 061a21d36d (Merge branch 'ab/fsck-unexpected-type', 2021-10-25).
1. https://lore.kernel.org/git/20211111030302.75694-1-hanxin.hx@alibaba-inc.com/
2. https://lore.kernel.org/git/cover-v10-00.17-00000000000-20211001T091051Z-avarab@gmail.com/
Reported-by: Han Xin <chiyutianyi@gmail.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
http-fetch prints the URL after failing to fetch it. This can be
confusing to users (they cannot really do anything with it), and they
can share by accident a sensitive URL (e.g. with credentials) while
looking for help.
Redact the URL unless the GIT_TRACE_REDACT variable is set to false. This
mimics the redaction of other sensitive information in git, like the
Authorization header in HTTP.
Fix also capitalization of previous die() message (must start in
lowercase).
Signed-off-by: Ivan Frade <ifrade@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In some setups, packfile uris act as bearer token. It is not
recommended to expose them plainly in logs, although in special
circunstances (e.g. debug) it makes sense to write them.
Redact the packfile URL paths by default, unless the GIT_TRACE_REDACT
variable is set to false. This mimics the redacting of the Authorization
header in HTTP.
Signed-off-by: Ivan Frade <ifrade@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
unpack_object_header_buffer() attempts to protect against overflowing
left shifts, but the limit of the shift amount should not be the size of
the variable being shifted. It should be the size minus the size of its
contents. Fix that accordingly.
This was noticed at $DAYJOB by a fuzzer running internally.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The way Cygwin emulates a unix-domain socket, on top of which the
simple-ipc mechanism is implemented, can race with the program on
the other side that wants to use the socket, and briefly make it
appear as a regular file before lstat(2) starts reporting it as a
socket. We now have a workaround on the side that connects to a
unix domain socket.
* js/simple-ipc-cygwin-socket-fix:
simple-ipc: work around issues with Cygwin's Unix socket emulation
"git maintenance run" learned to use system supplied scheduler
backend, but cron on macOS turns out to be unusable for this
purpose.
* ds/no-usable-cron-on-macos:
maintenance: disable cron on macOS
"git pull --ff-only" and "git pull --rebase --ff-only" should make
it a no-op to attempt pulling from a remote that is behind us, but
instead the command errored out by saying it was impossible to
fast-forward, which may technically be true, but not a useful thing
to diagnose as an error. This has been corrected.
* jc/fix-pull-ff-only-when-already-up-to-date:
pull: --ff-only should make it a noop when already-up-to-date
The "-Y find-principals" option of ssh-keygen seems to be broken in
Debian's openssh-client 1:8.7p1-1, whereas it works fine in 1:8.4p1-5.
This causes several failures for GPGSSH tests. We fulfill the
prerequisite because generating the keys works fine, but actually
verifying a signature causes results ranging from bogus results to
ssh-keygen segfaulting.
We can find the broken version during the prereq check by feeding it
empty input. This should result in it complaining to stderr, but in the
broken version it triggers the segfault, causing the GPGSSH tests to be
skipped.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In eba1ba9 (maintenance: `git maintenance run` learned
`--scheduler=<scheduler>`, 2021-09-04), we introduced the ability to
specify a scheduler explicitly. This led to some extra checks around
whether an alternative scheduler was available. This added the
functionality of removing background maintenance from schedulers other
than the one selected.
On macOS, cron is technically available, but running 'crontab' triggers
a UI prompt asking for special permissions. This is the major reason why
launchctl is used as the default scheduler. The is_crontab_available()
method triggers this UI prompt, causing user disruption.
Remove this disruption by using an #ifdef to prevent running crontab
this way on macOS. This has the unfortunate downside that if a user
manually selects cron via the '--scheduler' option, then adjusting the
scheduler later will not remove the schedule from cron. The
'--scheduler' option ignores the is_available checks, which is how we
can get into this situation.
Extract the new check_crontab_process() method to avoid making the
'child' variable unused on macOS. The method is marked MAYBE_UNUSED
because it has no callers on macOS.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Cygwin emulates Unix sockets by writing files with custom contents and
then marking them as system files.
The tricky problem is that while the file is written and its `system`
bit is set, it is still identified as a file. This caused test failures
when Git is too fast looking for the Unix sockets and then complains
that there is a plain file in the way.
Let's work around this by adding a delayed retry loop, specifically for
Cygwin.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Tested-by: Ramsay Jones <ramsay@ramsayjones.plus.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* 'master' of github.com:git/git:
Git 2.34-rc2
parse-options.[ch]: revert use of "enum" for parse_options()
t/lib-git.sh: fix ACL-related permissions failure
A few fixes before -rc2
async_die_is_recursing: work around GCC v11.x issue on Fedora
Document positive variant of commit and merge option "--no-verify"
pull: honor --no-verify and do not call the commit-msg hook
http-backend: remove a duplicated code branch
Fix ssh-signing test to work on a platform where the default ACL is
overly loose to upset OpenSSH (reported on an installation of Cygwin).
* ad/ssh-signing-testfix:
t/lib-git.sh: fix ACL-related permissions failure
