Perforce repositories can contain large (binary) files. Migrating these
repositories to Git generates very large local clones. External storage
systems such as Git LFS [1], Git Fat [2], Git Media [3], git-annex [4]
try to address this problem.
Add a generic mechanism to detect large files based on extension,
uncompressed size, and/or compressed size.
[1] https://git-lfs.github.com/
[2] https://github.com/jedbrown/git-fat
[3] https://github.com/alebedev/git-media
[4] https://git-annex.branchable.com/
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Conflicts:
Documentation/git-p4.txt
git-p4.py
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-p4 will just halt if there is not enough disk space while
streaming content from P4 to Git. Add a check to ensure at least
4 times (arbitrarily chosen) the size of a streamed file is available.
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a file is streamed from P4 to Git then the verbose mode prints
continuously the progress as percentage like this:
//depot/file.bin 20% (10 MB)
Upon completion the progress is overwritten with depot source, local
file and size like this:
//depot/file.bin --> local/file.bin (10 MB)
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a git config reader for integer variables. Please note that the
git config implementation automatically supports k, m, and g suffixes.
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The functions "gitConfig" and "gitConfigBool" are almost identical.
Make "gitConfig" more generic by adding an optional type specifier.
Use the type specifier "--bool" with "gitConfig" to implement
"gitConfigBool. This prepares the implementation of other type
specifiers such as "--int".
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Acked-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Recent "git am" had regression when adding a Signed-off-by line
with its "-s" option by an unintended tightening of how an existing
trailer block is detected.
* jc/builtin-am-signoff-regression-fix:
am: match --signoff to the original scripted version
Linus noticed that the recently reimplemented "git am -s" defines
the trailer block too rigidly, resulting in an unnecessary blank
line between the existing sign-offs and his new sign-off. An e-mail
submission sent to Linus in real life ends with mixture of sign-offs
and commentaries, e.g.
title here
message here
Signed-off-by: Original Author <original@auth.or>
[rv: tweaked frotz and nitfol]
Signed-off-by: Re Viewer <rv@ew.er>
Signed-off-by: Other Reviewer <other@rev.ewer>
---
patch here
Because the reimplementation reused append_signoff() helper that is
used by other codepaths, which is unaware that people intermix such
comments with their sign-offs in the trailer block, such a message
was judged to end with a non-trailer, resulting in an extra blank
line before adding a new sign-off.
The original scripted version of "git am" used a lot looser
definition, i.e. "if and only if there is no line that begins with
Signed-off-by:, add a blank line before adding a new sign-off". For
the upcoming release, stop using the append_signoff() in "git am"
and reimplement the looser definition used by the scripted version
to use only in "git am" to fix this regression in "am" while
avoiding new regressions to other users of append_signoff().
In the longer term, we should look into loosening append_signoff()
so that other codepaths that add a new sign-off behave the same way
as "git am -s", but that is a task for post-release.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git init empty && git -C empty log" said "bad default revision 'HEAD'",
which was found to be a bit confusing to new users.
* jk/log-missing-default-HEAD:
log: diagnose empty HEAD more clearly
The "interpret-trailers" helper mistook a multi-paragraph title of
a commit log message with a colon in it as the end of the trailer
block.
* cc/trailers-corner-case-fix:
trailer: support multiline title
trailer: retitle a test and correct an in-comment message
trailer: ignore first line of message
When re-priming the cache-tree opportunistically while committing
the in-core index as-is, we mistakenly invalidated the in-core
index too aggressively, causing the experimental split-index code
to unnecessarily rewrite the on-disk index file(s).
* dt/commit-preserve-base-index-upon-opportunistic-cache-tree-update:
commit: don't rewrite shared index unnecessarily
"git archive" did not use zip64 extension when creating an archive
with more than 64k entries, which nobody should need, right ;-)?
* rs/archive-zip-many:
archive-zip: support more than 65535 entries
archive-zip: use a local variable to store the creator version
t5004: test ZIP archives with many entries
The code in "multiple-worktree" support that attempted to recover
from an inconsistent state updated an incorrect file.
* nd/fixup-linked-gitdir:
setup: update the right file in multiple checkouts
"git rev-list" does not take "--notes" option, but did not complain
when one is given.
* jk/rev-list-has-no-notes:
rev-list: make it obvious that we do not support notes
Because the configuration system does not allow "alias.0foo" and
"pager.0foo" as the configuration key, the user cannot use '0foo'
as a custom command name anyway, but "git 0foo" tried to look these
keys up and emitted useless warnings before saying '0foo is not a
git command'. These warning messages have been squelched.
* jk/fix-alias-pager-config-key-warnings:
config: silence warnings for command names with invalid keys
t1509 test that requires a dedicated VM environment had some
bitrot, which has been corrected.
* ps/t1509-chroot-test-fixup:
tests: fix cleanup after tests in t1509-root-worktree
tests: fix broken && chains in t1509-root-worktree
strbuf_read() used to have one extra iteration (and an unnecessary
strbuf_grow() of 8kB), which was eliminated.
* jh/strbuf-read-use-read-in-full:
strbuf_read(): skip unnecessary strbuf_grow() at eof
The codepath to produce error messages had a hard-coded limit to
the size of the message, primarily to avoid memory allocation while
calling die().
* jk/long-error-messages:
vreportf: avoid intermediate buffer
vreportf: report to arbitrary filehandles
When trying to see that an object does not exist, a state errno
leaked from our "first try to open a packfile with O_NOATIME and
then if it fails retry without it" logic on a system that refuses
O_NOATIME. This confused us and caused us to die, saying that the
packfile is unreadable, when we should have just reported that the
object does not exist in that packfile to the caller.
* cb/open-noatime-clear-errno:
git_open_noatime: return with errno=0 on success
An off-by-one error made "git remote" to mishandle a remote with a
single letter nickname.
* mh/get-remote-group-fix:
get_remote_group(): use skip_prefix()
get_remote_group(): eliminate superfluous call to strcspn()
get_remote_group(): rename local variable "space" to "wordlen"
get_remote_group(): handle remotes with single-character names
Recent "git am" introduced a double-locking failure when used with
the "--3way" option that invokes rerere machinery.
* jk/am-rerere-lock-fix:
rerere: release lockfile in non-writing functions
The "interpret-trailers" helper mistook a multi-paragraph title of
a commit log message with a colon in it as the end of the trailer
block.
* cc/trailers-corner-case-fix:
trailer: support multiline title
"git init empty && git -C empty log" said "bad default revision 'HEAD'",
which was found to be a bit confusing to new users.
* jk/log-missing-default-HEAD:
log: diagnose empty HEAD more clearly
When re-priming the cache-tree opportunistically while committing
the in-core index as-is, we mistakenly invalidated the in-core
index too aggressively, causing the experimental split-index code
to unnecessarily rewrite the on-disk index file(s).
* dt/commit-preserve-base-index-upon-opportunistic-cache-tree-update:
commit: don't rewrite shared index unnecessarily
"git archive" did not use zip64 extension when creating an archive
with more than 64k entries, which nobody should need, right ;-)?
* rs/archive-zip-many:
archive-zip: support more than 65535 entries
archive-zip: use a local variable to store the creator version
t5004: test ZIP archives with many entries
On case insensitive systems, "git p4" did not work well with client
specs.
* ls/p4-fold-case-client-specs:
git-p4: honor core.ignorecase when using P4 client specs
The code in "multiple-worktree" support that attempted to recover
from an inconsistent state updated an incorrect file.
* nd/fixup-linked-gitdir:
setup: update the right file in multiple checkouts
There's a bug in builtin/am.c in which we take a lock on
MERGE_RR recursively. But rather than fix am.c, this patch
fixes the confusing interface from rerere.c that caused the
bug. Read on for the gory details.
The setup_rerere() function both reads the existing MERGE_RR
file, and takes MERGE_RR.lock. In the rerere() and
rerere_forget() functions, we end up in write_rr(), which
will then commit the lock file.
But for functions like rerere_clear() that do not write to
MERGE_RR, we expect the caller to have handled
setup_rerere(). That caller would then need to release the
lockfile, but it can't; the lock struct is local to
rerere.c.
For builtin/rerere.c, this is OK. We run a single rerere
operation and then exit immediately, which has the side
effect of rolling back the lockfile.
But in builtin/am.c, this is actively wrong. If we run "git
am -3 --skip", we call setup-rerere twice without releasing
the lock:
1. The "--skip" causes us to call am_rerere_clear(), which
calls setup_rerere(), but never drops the lock.
2. We then proceed to the next patch.
3. The "--3way" may cause us to call rerere() to handle
conflicts in that patch, but we are already holding the
lock. The lockfile code dies with:
BUG: prepare_tempfile_object called for active object
We could fix this by having rerere_clear() call
rollback_lock_file(). But it feels a bit odd for it to roll
back a lockfile that it did not itself take. So let's
simplify the interface further, and handle setup_rerere in
the function itself, taking away the question from the
caller over whether they need to do so.
We can give rerere_gc() the same treatment, as well (even
though it doesn't have any callers besides builtin/rerere.c
at this point). Note that these functions don't take flags
from their callers to pass along to setup_rerere; that's OK,
because the flags would not be meaningful for what they are
doing.
Both of those functions need to hold the lock because even
though they do not write to MERGE_RR, they are still writing
and should be protected from a simultaneous "rerere" run.
But rerere_remaining(), "rerere diff", and "rerere status"
are all read-only operations. They want to setup_rerere(),
but do not care about taking the lock in the first place.
Since our update of MERGE_RR is the usual atomic rename done
by commit_lock_file, they can just do a lockless read. For
that, we teach setup_rerere a READONLY flag to avoid the
lock.
As a bonus, this pushes builtin/rerere.c's setup_rerere call
closer to the functions that use it. Which means that "git
rerere totally-bogus-command" will no longer silently
exit(0) in a repository without rerere enabled.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
