Now that lock_ref_sha1_basic() gives us back its error messages via a
strbuf, incorporate its error message into our error message rather
than emitting two separate error messages.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
If there is a failure to lock a reference that is likely caused by a
D/F conflict (e.g., trying to lock "refs/foo/bar" when reference
"refs/foo" already exists), invoke verify_refname_available() to try
to generate a more helpful error message.
That function might not detect an error. For example, some
non-reference file might be blocking the deletion of an
otherwise-empty directory tree, or there might be a race with another
process that just deleted the offending reference. In such cases,
generate the strerror-based error message like before.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
For now, change the callers to spew the error to stderr like before.
But soon we will change them to incorporate the reason for the failure
into their own error messages.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
It shouldn't be spewing errors directly to stderr.
For now, change its callers to spew the errors to stderr.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Rename is_refname_available() to verify_refname_available() and change
its return value from 1 for success to 0 for success, to be consistent
with our error-handling convention. In a moment it will also get a
"struct strbuf *err" parameter.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
If two references that D/F conflict (e.g., "refs/foo" and
"refs/foo/bar") are created in a single transaction, the old code
discovered the problem only after the "commit" phase of
ref_transaction_commit() had already begun. This could leave some
references updated and others not, which violates the promise of
atomicity.
Instead, check for such conflicts during the "locking" phase:
* Teach is_refname_available() to take an "extras" parameter that can
contain extra reference names with which the specified refname must
not conflict.
* Change lock_ref_sha1_basic() to take an "extras" parameter, which it
passes through to is_refname_available().
* Change ref_transaction_commit() to pass "affected_refnames" to
lock_ref_sha1_basic() as its "extras" argument.
This change fixes a test case in t1404.
This code is a bit stricter than it needs to be. We could conceivably
allow reference "refs/foo/bar" to be created in the same transaction
as "refs/foo" is deleted (or vice versa). But that would be
complicated to implement, because it is not possible to lock
"refs/foo/bar" while "refs/foo" exists as a loose reference, but on
the other hand we don't want to delete some references before adding
others (because that could leave a gap during which required objects
are unreachable). There is also a complication that reflog files'
paths can conflict.
Any less-strict implementation would probably require tricks like the
packing of all references before the start of the real transaction, or
the use of temporary intermediate reference names.
So for now let's accept too-strict checks. Some reference update
transactions will be rejected unnecessarily, but they will be rejected
in their entirety rather than leaving the repository in an
intermediate state, as would happen now.
Please note that there is still one kind of D/F conflict that is *not*
handled correctly. If two processes are running at the same time, and
one tries to create "refs/foo" at the same time that the other tries
to create "refs/foo/bar", then they can race with each other. Both
processes can obtain their respective locks ("refs/foo.lock" and
"refs/foo/bar.lock"), proceed to the "commit" phase of
ref_transaction_commit(), and then the slower process will discover
that it cannot rename its lockfile into place (after possibly having
committed changes to other references). There appears to be no way to
fix this race without changing the locking policy, which in turn would
require a change to *all* Git clients.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Detect duplicates by storing the reference names in a string_list and
sorting that, instead of sorting the ref_updates directly.
* In a moment the string_list will be used for another purpose, too.
* This removes the need for the custom comparison function
ref_update_compare().
* This means that we can carry out the updates in the order that the
user specified them instead of reordering them. This might be handy
someday if, we want to permit multiple updates to a single reference
as long as they are compatible with each other.
Note: we can't use string_list_remove_duplicates() to check for
duplicates, because we need to know the name of the reference that
appeared multiple times, to be used in the error message.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
In the first loop (over prefixes of refname), use dirname to keep
track of the current prefix. This is not an improvement in itself, but
in a moment we will start using dirname for a role where a
NUL-terminated string is needed.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Now that we don't need a ref_entry to pass to
report_refname_conflict(), it is sufficient to store the refname of
the conflicting reference.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
It wasn't pulling its weight. And we are about to need code similar to
this where no ref_entry is available and with more diverse error
messages. Rather than try to generalize the function, just inline it.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
It wasn't pulling its weight. And in a moment we will need similar
tests that take a refname rather than a ref_entry as parameter, which
would have made entry_matches() even less useful.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
This change wouldn't be worth it by itself, but in a moment we will
use the strbuf for more string juggling.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
The function had a "dir" parameter that was shadowed by a local "dir"
variable within a code block. Use the former in place of the latter.
(This is consistent with "dir"'s use elsewhere in the function.)
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Change the comments to a running example of running the function with
refname set to "refs/foo/bar". Add some more explanation of the logic.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Add some tests of reference D/F conflicts (by which I mean the fact
that references like "refs/foo" and "refs/foo/bar" are not allowed to
coexist) in the context of reference transactions.
The test of creating two conflicting references in the same
transaction fails, leaving the transaction half-completed. This will
be fixed later in this patch series.
Please note that the error messages emitted in the case of conflicts
are not very user-friendly. In particular, when the conflicts involve
loose references, then the errors are reported as
error: there are still refs under 'refs/foo'
fatal: Cannot lock the ref 'refs/foo'.
or
error: unable to resolve reference refs/foo/bar: Not a directory
fatal: Cannot lock the ref 'refs/foo/bar'.
This is because lock_ref_sha1_basic() fails while trying to lock the
new reference, before it even gets to the is_refname_available()
check. This situation will also be improved later in this patch
series.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
The only changes are to the README files, most notably the list of
maintainers and the project URL.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
An earlier update to the parser that disects a URL broke an
address, followed by a colon, followed by an empty string (instead
of the port number), e.g. ssh://example.com:/path/to/repo.
* tb/connect-ipv6-parse-fix:
connect.c: ignore extra colon after hostname
The completion script (in contrib/) contaminated global namespace
and clobbered on a shell variable $x.
* ma/bash-completion-leaking-x:
completion: fix global bash variable leak on __gitcompappend
The "git push --signed" protocol extension did not limit what the
"nonce" that is a server-chosen string can contain or how long it
can be, which was unnecessarily lax. Limit both the length and the
alphabet to a reasonably small space that can still have enough
entropy.
* jc/push-cert:
push --signed: tighten what the receiving end can ask to sign
Document `git status -v`, including its new doubled `-vv` form.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make many textual tweaks to the 2.4.0 release notes.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"Todo list" is the name that is used in the user-facing documentation.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"diff-highlight" (in contrib/) used to show byte-by-byte
differences, which meant that multi-byte characters can be chopped
in the middle. It learned to pay attention to character boundaries
(assuming the UTF-8 payload).
* jk/colors:
diff-highlight: do not split multibyte characters
Test fixes.
* jk/test-annoyances:
t5551: make EXPENSIVE test cheaper
t5541: move run_with_cmdline_limit to test-lib.sh
t: pass GIT_TRACE through Apache
t: redirect stderr GIT_TRACE to descriptor 4
t: translate SIGINT to an exit
An earlier update to the parser that disects an address broke an
address, followed by a colon, followed by an empty string (instead
of the port number).
* tb/connect-ipv6-parse-fix:
connect.c: ignore extra colon after hostname
Test fixes for git-p4.
* va/fix-git-p4-tests:
t9814: guarantee only one source exists in git-p4 copy tests
git-p4: fix copy detection test
t9814: fix broken shell syntax in git-p4 rename test
The "git push --signed" protocol extension did not limit what the
"nonce" that is a server-chosen string can contain or how long it
can be, which was unnecessarily lax. Limit both the length and the
alphabet to a reasonably small space that can still have enough
entropy.
* jc/push-cert:
push --signed: tighten what the receiving end can ask to sign
The completion script (in contrib/) contaminated global namespace
and clobbered on a shell variable $x.
* ma/bash-completion-leaking-x:
completion: fix global bash variable leak on __gitcompappend
