When update-trees::threeway_merge() decides that a path that
exists in the current index (and HEAD) is to be removed, it
leaves a stage 0 entry whose mode bits are set to 0. The code
mistook it as "this stage wants the blob here", and proceeded
to call update_file_flags() which ended up trying to put the
mode=0 entry in the index, got very confused, and ended up
barfing with "do not know what to do with 000000".
Since threeway_merge() does not handle case #10 (one side
removes while the other side does not do anything), this is not
a problem while we refuse to merge branches that have D/F
conflicts, but when we start resolving them, we would need to be
able to remove cache entries, and at that point it starts to
matter.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This fixes three buglets in threeway_merge() regarding D/F
conflict entries.
* After finishing with path D and handling path D/F, some stages
have D/F conflict entry which are obviously non-NULL. For the
purpose of determining if the path D/F is missing in the
ancestor, they should not be taken into account.
* D/F conflict entry is a marker to say "this stage does _not_
have the path", so do not send them to keep_entry().
Signed-off-by: Junio C Hamano <junkio@cox.net>
Case #10 is not handled with unpack-trees.c:threeway_merge()
internally, unless under the agressive rule, and it is not a
bug. As the test expects, ND (one side did not do anything,
other side deleted) case was meant to be handled by the caller's
policy (e.g. git-merge-one-file or git-merge-recursive).
Signed-off-by: Junio C Hamano <junkio@cox.net>
As noted by Junio, --format=tar should be assumed if no format
was specified.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* jc/merge-subtree:
A new merge stragety 'subtree'.
It is safe to merge this early as this is a feature that user
explicitly needs to ask for and would not trigger otherwise. A
known issue with the current implementation is that the subtree
matching heuristics is very stupid. It could run ls-tree twice
and try to count intersection.
Giving it wider audience would help it to get improved by
motivated volunteers.
Signed-off-by: Junio C Hamano <junkio@cox.net>
* maint:
Add Documentation/cmd-list.made to .gitignore
git-svn: fix log command to avoid infinite loop on long commit messages
git-svn: dcommit/rebase confused by patches with git-svn-id: lines
git-svn: bail out on incorrect command-line options
This bug has been around since the the conversion to use the
Git.pm library back in October or November. Eventually I'd like
"git rev-list/log" to have the option to not truncate overly
long messages.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
When patches are merged from another git-svn managed branch,
they will have the git-svn-id: metadata line in them (generated
by git-format-patch).
When doing rebase or dcommit via git-svn, this would cause
git-svn to find the wrong upstream branch. We now verify
that the commit is consistent with the value in the .rev_db
file.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
"git svn log" is the only command that needs the pass-through
option in Getopt::Long; otherwise we will bail out and let the
user know something is wrong.
Also, avoid printing out unaccepted mixed-case options (that
are reserved for the command-line) such as --useSvmProps
in the usage() function.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* 'jc/read-tree-df' (early part):
Fix switching to a branch with D/F when current branch has file D.
Fix twoway_merge that passed d/f conflict marker to merged_entry().
Fix read-tree --prefix=dir/.
unpack-trees: get rid of *indpos parameter.
unpack_trees.c: pass unpack_trees_options structure to keep_entry() as well.
add_cache_entry(): removal of file foo does not conflict with foo/bar
Fix a typo: s/Not/Note/
Some formating fixes: Use ` ` syntax for all filenames and
' ' syntax for all commandline switches.
Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This merge strategy largely piggy-backs on git-merge-recursive.
When merging trees A and B, if B corresponds to a subtree of A,
B is first adjusted to match the tree structure of A, instead of
reading the trees at the same level. This adjustment is also
done to the common ancestor tree.
If you are pulling updates from git-gui repository into git.git
repository, the root level of the former corresponds to git-gui/
subdirectory of the latter. The tree object of git-gui's toplevel
is wrapped in a fake tree object, whose sole entry has name 'git-gui'
and records object name of the true tree, before being used by
the 3-way merge code.
If you are merging the other way, only the git-gui/ subtree of
git.git is extracted and merged into git-gui's toplevel.
The detection of corresponding subtree is done by comparing the
pathnames and types in the toplevel of the tree.
Heuristics galore! That's the git way ;-).
Signed-off-by: Junio C Hamano <junkio@cox.net>
When pushing into multiple repositories with git push, via
multiple URL in .git/remotes/$shorthand or multiple url
variables in [remote "$shorthand"] section, we used to stop upon
the first failure. Continue the operation and report the
failure at the end.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This came up on #git when somebody was getting 'unable to create
./objects/tmp_oXXXX' but sweared he had write permission to that
directory. It turned out that the repository URL was changed
and he was accessing a repository he does not have a write
permission anymore.
I am not sure how much this would have helped somebody who
believed he was accessing location when the permission of that
location was changed while he was looking the other way, though.
But giving more information on the error path would be better,
and the next change would be helped with this as well.
Signed-off-by: Junio C Hamano <junkio@cox.net>
* jc/index-output:
git-read-tree --index-output=<file>
_GIT_INDEX_OUTPUT: allow plumbing to output to an alternative index file.
Conflicts:
builtin-apply.c
* cc/bisect:
git-bisect: allow bisecting with only one bad commit.
t6030: add a bit more tests to git-bisect
git-bisect: modernization
Documentation: bisect: "start" accepts one bad and many good commits
Bisect: teach "bisect start" to optionally use one bad and many good revs.
* maint:
Documentation: tighten dependency for git.{html,txt}
Makefile: iconv() on Darwin has the old interface
t5300-pack-object.sh: portability issue using /usr/bin/stat
t3200-branch.sh: small language nit
usermanual.txt: some capitalization nits
Make builtin-branch.c handle the git config file
rename_ref(): only print a warning when config-file update fails
Distinguish branches by more than case in tests.
Avoid composing too long "References" header.
cvsimport: Improve formating consistency
cvsimport: Reorder options in documentation for better understanding
cvsimport: Improve usage error reporting
cvsimport: Improve documentation of CVSROOT and CVS module determination
cvsimport: sync usage lines with existing options
Conflicts:
Documentation/Makefile
Every time _any_ documentation page changed, cmds-*.txt files
were regenerated, which caused git.{html,txt} to be remade. Try
not to update cmds-*.txt files if their new contents match the
old ones.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The libiconv on Darwin uses the old iconv() interface (2nd argument is a
const char **, instead of a char **). Add OLD_ICONV to the Darwin
variable definitions to handle this.
Signed-off-by: Arjen Laarhoven <arjen@yaph.org>
Acked-by: Brian Gernhardt <benji@silverinsanity.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
In the test 'compare delta flavors', /usr/bin/stat is used to get file size.
This isn't portable. There already is a dependency on Perl, use its '-s'
operator to get the file size.
Signed-off-by: Arjen Laarhoven <arjen@yaph.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This allows you to say:
git bisect start
git bisect bad $bad
git bisect next
to start bisection without knowing a good commit. This would
have you try a commit that is half-way since the beginning of
the history, which is rather wasteful if you already know a good
commit, but if you don't (or your history is short enough that
you do not care), there is no reason not to allow this.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This moves the knowledge about .git/config usage out of refs.c and into
builtin-branch.c instead, which allows git-branch to update HEAD to point
at the moved branch before attempting to update the config file. It also
allows git-branch to exit with an error code if updating the config file
should fail.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
If git_config_rename_section() fails, rename_ref() used to return 1, which
left HEAD pointing to an absent refs/heads file (since the actual renaming
had already occurred).
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The renaming without config test changed a branch from q to Q, which
fails on non-case sensitive file systems. Change the test to use q
and q2.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The number of characters in a line MUST be no more than 998 characters,
and SHOULD be no more than 78 characters (RFC2822).
It is much safer to fold the header by ourselves.
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Use ' ' syntax for all commandline options mentioned in text.
Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The current order the options are documented in makes no sense
at all to me. Reorder them so that similar options are grouped
together and also order them somehwhat by importance.
Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Actually tell the user what he did wrong in case of usage errors
instead of only printing the general usage information.
Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Document the fact that git-cvsimport tries to find out CVSROOT from
CVS/Root and $ENV{CVSROOT} and CVS_module from CVS/Repository.
Also use ` ` syntax for all filenames for consistency.
Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Sync both the usage lines in the code and the asciidoc
documentation with the real list of options. While
all options seems to be documented in the asciidoc
document, not all of them were listed in the usage line.
Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This slightly modernizes the bisect script to use show-ref/for-each-ref
instead of looking into $GIT_DIR/refs files directly.
Signed-off-by: Junio C Hamano <junkio@cox.net>
* maint:
Fix lseek(2) calls with args 2 and 3 swapped
Honor -p<n> when applying git diffs
Fix dependency of common-cmds.h
Fix renaming branch without config file
DESTDIR support for git/contrib/emacs
gitweb: Fix bug in "blobdiff" view for split (e.g. file to symlink) patches
Document --left-right option to rev-list.
Revert "builtin-archive: use RUN_SETUP"
rename contrib/hooks/post-receieve-email to contrib/hooks/post-receive-email.
rerere: make sorting really stable.
Fix t4200-rerere for white-space from "wc -l"
One bad commit is fundamentally needed for bisect to run,
and if we beforehand know more good commits, we can narrow
the bisect space down without doing the whole tree checkout
every time we give good commits.
This patch implements:
git bisect start [<bad> [<good>...]] [--] [<pathspec>...]
as a short-hand for this command sequence:
git bisect start
git bisect bad $bad
git bisect good $good1 $good2...
On the other hand, there may be some confusion between revs
(<bad> and <good>...) and <pathspec>... if -- is not used
and if an invalid rev or a pathspec that looks like a rev is
given.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
GNU make does not include environment variables by default
in its namespace. Just pass them in make command line.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This function was not called "add_file_to_cache()" only because
an ancient program, update-cache, used that name as an internal
function name that does something slightly different. Now that
is gone, we can take over the better name.
The plan is to name all functions that operate on the default
index xxx_cache(). Later patches create a variant of them that
take an explicit parameter xxx_index(), and then turn
xxx_cache() functions into macros that use "the_index".
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is an internal variable used to tell if we need to write
out the resulting index.
I'll be introducing write_index() function which would collide
with it.
Signed-off-by: Junio C Hamano <junkio@cox.net>
