After our loop through the selected strategies, we compare best_strategy
to wt_strategy. This is fine, but the fact that the code setting
best_strategy sets it to use_strategies[i]->name requires a little bit
of extra checking to determine that at the time of setting, that's the
same as wt_strategy. Just setting best_strategy to wt_strategy makes it
a little easier to verify what the loop is doing, at least for this
reader.
Further, use_strategies[i]->name is used in a number of places, where we
could just use wt_strategy. The latter takes less time for this reader
to parse (one variable name instead of three), so just use wt_strategy
to make the code slightly faster for human readers to parse.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
builtin/merge.c has a loop over the specified strategies, where if they
all fail with conflicts, it picks the one with the least number of
conflicts.
In the codepath that finds a successful merge, if an automatic commit
was wanted, the code breaks out of the above loop, which makes sense.
However, if the user requested there be no automatic commit, the loop
would continue. That seems weird; --no-commit should not affect the
choice of merge strategy, but the code as written makes one think it
does. However, since the loop itself embeds "!merge_was_ok" as a
condition on continuing to loop, it actually would also exit early if
--no-commit was specified, it just exited from a different location.
Restructure the code slightly to make it clear that the loop will
immediately exit whenever we find a merge strategy that is successful.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git rev-list --disk-usage" learned to take an optional value
"human" to show the reported value in human-readable format, like
"3.40MiB".
* ll/disk-usage-humanise:
rev-list: support human-readable output for `--disk-usage`
"git rm" has become more aware of the sparse-index feature.
* sy/sparse-rm:
rm: integrate with sparse-index
rm: expand the index only when necessary
pathspec.h: move pathspec_needs_expanded_index() from reset.c to here
t1092: add tests for `git-rm`
Fixes to sparse index compatibility work for "reset" and "checkout"
commands.
* vd/sparse-reset-checkout-fixes:
unpack-trees: unpack new trees as sparse directories
cache.h: create 'index_name_pos_sparse()'
oneway_diff: handle removed sparse directories
checkout: fix nested sparse directory diff in sparse index
"git fsck" reads mode from tree objects but canonicalizes the mode
before passing it to the logic to check object sanity, which has
hid broken tree objects from the checking logic. This has been
corrected, but to help exiting projects with broken tree objects
that they cannot fix retroactively, the severity of anomalies this
code detects has been demoted to "info" for now.
* jk/fsck-tree-mode-bits-fix:
fsck: downgrade tree badFilemode to "info"
fsck: actually detect bad file modes in trees
tree-walk: add a mechanism for getting non-canonicalized modes
Platform-specific code that determines if a directory is OK to use
as a repository has been taught to report more details, especially
on Windows.
* js/safe-directory-plus:
mingw: handle a file owned by the Administrators group correctly
mingw: be more informative when ownership check fails on FAT32
mingw: provide details about unsafe directories' ownership
setup: prepare for more detailed "dubious ownership" messages
setup: fix some formatting
Avoid repeatedly running getconf to ask libc version in the test
suite, and instead just as it once per script.
* pw/use-glibc-tunable-for-malloc-optim:
tests: cache glibc version check
Expose a lot of "tech docs" via "git help" interface.
* ab/tech-docs-to-help:
docs: move http-protocol docs to man section 5
docs: move cruft pack docs to gitformat-pack
docs: move pack format docs to man section 5
docs: move signature docs to man section 5
docs: move index format docs to man section 5
docs: move protocol-related docs to man section 5
docs: move commit-graph format docs to man section 5
git docs: add a category for file formats, protocols and interfaces
git docs: add a category for user-facing file, repo and command UX
git help doc: use "<doc>" instead of "<guide>"
help.c: remove common category behavior from drop_prefix() behavior
help.c: refactor drop_prefix() to use a "switch" statement"
Plug a bit more leaks in the revisions API.
* ab/plug-revisions-leak:
revisions API: don't leak memory on argv elements that need free()-ing
bisect.c: partially fix bisect_rev_setup() memory leak
log: refactor "rev.pending" code in cmd_show()
log: fix a memory leak in "git show <revision>..."
test-fast-rebase helper: use release_revisions() (again)
bisect.c: add missing "goto" for release_revisions()
Extend SANITIZE=leak checking and declare more tests "currently leak-free".
* ab/leak-check:
CI: use "GIT_TEST_SANITIZE_LEAK_LOG=true" in linux-leaks
upload-pack: fix a memory leak in create_pack_file()
leak tests: mark passing SANITIZE=leak tests as leak-free
leak tests: don't skip some tests under SANITIZE=leak
test-lib: have the "check" mode for SANITIZE=leak consider leak logs
test-lib: add a GIT_TEST_PASSING_SANITIZE_LEAK=check mode
test-lib: simplify by removing test_external
tests: move copy/pasted PERL + Test::More checks to a lib-perl.sh
t/Makefile: don't remove test-results in "clean-except-prove-cache"
test-lib: add a SANITIZE=leak logging mode
t/README: reword the "GIT_TEST_PASSING_SANITIZE_LEAK" description
test-lib: add a --invert-exit-code switch
test-lib: fix GIT_EXIT_OK logic errors, use BAIL_OUT
test-lib: don't set GIT_EXIT_OK before calling test_atexit_handler
test-lib: use $1, not $@ in test_known_broken_{ok,failure}_
"git symbolic-ref symref non..sen..se" is now diagnosed as an error.
* lt/symbolic-ref-sanity:
symbolic-ref: refuse to set syntactically invalid target
The '--disk-usage' option for git-rev-list was introduced in 16950f8384
(rev-list: add --disk-usage option for calculating disk usage, 2021-02-09).
This is very useful for people inspect their git repo's objects usage
infomation, but the resulting number is quit hard for a human to read.
Teach git rev-list to output a human readable result when using
'--disk-usage'.
Signed-off-by: Li Linchao <lilinchao@oschina.cn>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There was a bug in the codepath to upgrade generation information
in commit-graph from v1 to v2 format, which has been corrected.
source: <cover.1657667404.git.me@ttaylorr.com>
* tb/commit-graph-genv2-upgrade-fix:
commit-graph: fix corrupt upgrade from generation v1 to v2
commit-graph: introduce `repo_find_commit_pos_in_graph()`
t5318: demonstrate commit-graph generation v2 corruption
Fix for a bug that makes write-tree to fail to write out a
non-existent index as a tree, introduced in 2.37.
source: <20220722212232.833188-1-martin.agren@gmail.com>
* tk/untracked-cache-with-uall:
read-cache: make `do_read_index()` always set up `istate->repo`
"git checkout" miscounted the paths it updated, which has been
corrected.
source: <cover.1657799213.git.matheus.bernardino@usp.br>
* mt/checkout-count-fix:
checkout: fix two bugs on the final count of updated entries
checkout: show bug about failed entries being included in final report
checkout: document bug where delayed checkout counts entries twice
"rerere-train" script (in contrib/) used to honor commit.gpgSign
while recreating the throw-away merges.
source: <PH7PR14MB5594A27B9295E95ACA4D6A69CE8F9@PH7PR14MB5594.namprd14.prod.outlook.com>
* cl/rerere-train-with-no-sign:
contrib/rerere-train: avoid useless gpg sign in training
"git p4" did not handle non-ASCII client name well, which has been
corrected.
source: <pull.1285.v3.git.git.1658394440.gitgitgadget@gmail.com>
* kk/p4-client-name-encoding-fix:
git-p4: refactoring of p4CmdList()
git-p4: fix bug with encoding of p4 client name
"git p4" working on UTF-16 files on Windows did not implement
CRLF-to-LF conversion correctly, which has been corrected.
source: <pull.1294.v2.git.git.1658341065221.gitgitgadget@gmail.com>
* mb/p4-utf16-crlf:
git-p4: fix CR LF handling for utf16 files
A corner case bug where lazily fetching objects from a promisor
remote resulted in infinite recursion has been corrected.
source: <cover.1656593279.git.hanxin.hx@bytedance.com>
* hx/lookup-commit-in-graph-fix:
t5330: remove run_with_limited_processses()
commit-graph.c: no lazy fetch in lookup_commit_in_graph()
The resolve-undo information in the index was not protected against
GC, which has been corrected.
source: <xmqq35f7kzad.fsf@gitster.g>
* jc/resolve-undo:
fsck: do not dereference NULL while checking resolve-undo data
revision: mark blobs needed for resolve-undo as reachable
The previous commit un-broke the "badFileMode" check; before then it was
literally testing nothing. And as far as I can tell, it has been so
since the very initial version of fsck.
The current severity of "badFileMode" is just "warning". But in the
--strict mode used by transfer.fsckObjects, that is elevated to an
error. This will potentially cause hassle for users, because historical
objects with bad modes will suddenly start causing pushes to many server
operators to be rejected.
At the same time, these bogus modes aren't actually a big risk. Because
we canonicalize them everywhere besides fsck, they can't cause too much
mischief in the real world. The worst thing you can do is end up with
two almost-identical trees that have different hashes but are
interpreted the same. That will generally cause things to be inefficient
rather than wrong, and is a bug somebody working on a Git implementation
would want to fix, but probably not worth inconveniencing users by
refusing to push or fetch.
So let's downgrade this to "info" by default, which is our setting for
"mention this when fscking, but don't ever reject, even under strict
mode". If somebody really wants to be paranoid, they can still adjust
the level using config.
Suggested-by: Xavier Morel <xavier.morel@masklinn.net>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We use the normal tree_desc code to iterate over trees in fsck, meaning
we only see the canonicalized modes it returns. And hence we'd never see
anything unexpected, since it will coerce literally any garbage into one
of our normal and accepted modes.
We can use the new RAW_MODES flag to see the real modes, and then use
the existing code to actually analyze them. The existing code is written
as allow-known-good, so there's not much point in testing a variety of
breakages. The one tested here should be S_IFREG but with nonsense
permissions.
Do note that the error-reporting here isn't great. We don't mention the
specific bad mode, but just that the tree has one or more broken modes.
But when you go to look at it with "git ls-tree", we'll report the
canonicalized mode! This isn't ideal, but given that this should come up
rarely, and that any number of other tree corruptions might force you
into looking at the binary bytes via "cat-file", it's not the end of the
world. And it's something we can improve on top later if we choose.
Reported-by: Xavier Morel <xavier.morel@masklinn.net>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using init_tree_desc() and tree_entry() to iterate over a tree, we
always canonicalize the modes coming out of the tree. This is a good
thing to prevent bugs or oddities in normal code paths, but it's
counter-productive for tools like fsck that want to see the exact
contents.
We can address this by adding an option to avoid the extra
canonicalization. A few notes on the implementation:
- I've attached the new option to the tree_desc struct itself. The
actual code change is in decode_tree_entry(), which is in turn
called by the public update_tree_entry(), tree_entry(), and
init_tree_desc() functions, plus their "gently" counterparts.
By letting it ride along in the struct, we can avoid changing the
signature of those functions, which are called many times. Plus it's
conceptually simpler: you really want a particular iteration of a
tree to be "raw" or not, rather than individual calls.
- We still have to set the new option somewhere. The struct is
initialized by init_tree_desc(). I added the new flags field only to
the "gently" version. That avoids disturbing the much more numerous
non-gentle callers, and it makes sense that anybody being careful
about looking at raw modes would also be careful about bogus trees
(i.e., the caller will be something like fsck in the first place).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous change introduced the bundle URI design document. It
creates a flexible set of options that allow bundle providers many ways
to organize Git object data and speed up clones and fetches. It is
particularly important that we have flexibility so we can apply future
advancements as new ideas for efficiently organizing Git data are
discovered.
However, the design document does not provide even an example of how
bundles could be organized, and that makes it difficult to envision how
the feature should work at the end of the implementation plan.
Add a section that details how a bundle provider could work, including
using the Git server advertisement for multiple geo-distributed servers.
This organization is based on the GVFS Cache Servers which have
successfully used similar ideas to provide fast object access and
reduced server load for very large repositories.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce the idea of bundle URIs to the Git codebase through an
aspirational design document. This document includes the full design
intended to include the feature in its fully-implemented form. This will
take several steps as detailed in the Implementation Plan section.
By committing this document now, it can be used to motivate changes
necessary to reach these final goals. The design can still be altered as
new information is discovered.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we wrap the tabdo command there's no need for a separate command
call.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Reviewed-by: Fernando Ramos <greenfoo@u92.eu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Layouts with a single window other than "MERGED" do not work (e.g.
"LOCAL" or "MERGED+LOCAL").
This is because as the documentation of bufdo says:
The last buffer (or where an error occurred) becomes the current
buffer.
And we do always do bufdo the end.
Additionally, we do it only once, when it should be per tab.
Fix this by doing it once per tab right after it's created and before
any buffer is switched.
Cc: Fernando Ramos <greenfoo@u92.eu>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Reviewed-by: Fernando Ramos <greenfoo@u92.eu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we treat tabs especially, the logic becomes much simpler.
Cc: Fernando Ramos <greenfoo@u92.eu>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Reviewed-by: Fernando Ramos <greenfoo@u92.eu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When diffopt has hiddenoff set and there's only one window (as is the
case in the single window mode) the diff mode is turned off.
We don't want that, so turn that option off.
Cc: Fernando Ramos <greenfoo@u92.eu>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Reviewed-by: Fernando Ramos <greenfoo@u92.eu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using the single window mode we are greeted with the following
warning:
"./content_LOCAL_8975" 6L, 28B
"./content_BASE_8975" 6 lines, 29 bytes
"./content_REMOTE_8975" 6 lines, 29 bytes
"content" 16 lines, 115 bytes
Press ENTER or type command to continue
every time.
Silence that.
Suggested-by: Fernando Ramos <greenfoo@u92.eu>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Reviewed-by: Fernando Ramos <greenfoo@u92.eu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When vimdiff3 was added in 7c147b77d3 (mergetools: add vimdiff3 mode,
2014-04-20), the description made clear the intention:
It's similar to the default, except that the other windows are
hidden. This ensures that removed/added colors are still visible on
the main merge window, but the other windows not visible.
However, in 0041797449 (vimdiff: new implementation with layout support,
2022-03-30) this was broken by generating a command that never creates
windows, and therefore vim never shows the diff.
The layout support implementation broke the whole purpose of vimdiff3,
and simply shows MERGED, which is no different from simply opening the
file with vim.
In order to show the diff, the windows need to be created first, and
then when they are hidden the diff remains (if hidenoff isn't set), but
by setting the `hidden` option the initial buffers are marked as hidden
thus making the feature work.
Suggested-by: Fernando Ramos <greenfoo@u92.eu>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Reviewed-by: Fernando Ramos <greenfoo@u92.eu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The name of the variable is wrong, and it can be set to anything, like
1.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Reviewed-by: Fernando Ramos <greenfoo@u92.eu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Bug report
https://lore.kernel.org/git/AM0PR02MB56357CC96B702244F3271014E8DC9@AM0PR02MB5635.eurprd02.prod.outlook.com/
noted that a file containing /r/r/n needed renormalising twice.
This is by design. Lone CR characters, not paired with an LF, are left
unchanged. Note this limitation of the "clean" filter in the documentation.
Renormalize was introduced at 9472935d81 (add: introduce "--renormalize",
Torsten Bögershausen, 2017-11-16)
Signed-off-by: Philip Oakley <philipoakley@iee.email>
Reviewed-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Enable the sparse index within the `git-rm` command.
The `p2000` tests demonstrate a ~92% execution time reduction for
'git rm' using a sparse index.
Test HEAD~1 HEAD
--------------------------------------------------------------------------
2000.74: git rm ... (full-v3) 0.41(0.37+0.05) 0.43(0.36+0.07) +4.9%
2000.75: git rm ... (full-v4) 0.38(0.34+0.05) 0.39(0.35+0.05) +2.6%
2000.76: git rm ... (sparse-v3) 0.57(0.56+0.01) 0.05(0.05+0.00) -91.2%
2000.77: git rm ... (sparse-v4) 0.57(0.55+0.02) 0.03(0.03+0.00) -94.7%
----
Also, normalize a behavioral difference of `git-rm` under sparse-index.
See related discussion [1].
`git-rm` a sparse-directory entry within a sparse-index enabled repo
behaves differently from a sparse directory within a sparse-checkout
enabled repo.
For example, in a sparse-index repo, where 'folder1' is a
sparse-directory entry, `git rm -r --sparse folder1` provides this:
rm 'folder1/'
Whereas in a sparse-checkout repo *without* sparse-index, doing so
provides this:
rm 'folder1/0/0/0'
rm 'folder1/0/1'
rm 'folder1/a'
Because `git rm` a sparse-directory entry does not need to expand the
index, therefore we should accept the current behavior, which is faster
than "expand the sparse-directory entry to match the sparse-checkout
situation".
Modify a previous test so such difference is not considered as an error.
[1] https://github.com/ffyuanda/git/pull/6#discussion_r934861398
Helped-by: Victoria Dye <vdye@github.com>
Helped-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Shaoxuan Yuan <shaoxuan.yuan02@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the `ensure_full_index()` method so `git-rm` does not always
expand the index when the expansion is unnecessary, i.e. when
<pathspec> does not have any possibilities to match anything outside
of sparse-checkout definition.
Expand the index when the <pathspec> needs an expanded index, i.e. the
<pathspec> contains wildcard that may need a full-index or the
<pathspec> is simply outside of sparse-checkout definition.
Notice that the test 'rm pathspec expands index when necessary' in
t1092 *is* testing this code change behavior, though it will be marked
as 'test_expect_success' only in the next patch, where we officially
mark `command_requires_full_index = 0`, so the index does not expand
unless we tell it to do so.
Notice that because we also want `ensure_full_index` to record the
stdout and stderr from Git command, a corresponding modification
is also included in this patch. The reason we want the "sparse-index-out"
and "sparse-index-err", is that we need to make sure there is no error
from Git command itself, so we can rely on the `test_region` result
and determine if the index is expanded or not.
Helped-by: Victoria Dye <vdye@github.com>
Helped-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Shaoxuan Yuan <shaoxuan.yuan02@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
