Do not print a duplicate clean color code when there
is no other indicators other than the current branch
in colored prompt.
Acked-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Eduardo R. D'Avila <erdavila@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
__git_ps1_colorize_gitstring() sets color codes and
builds the prompt gitstring. It has duplicated code
to handle color codes for bash and zsh shells.
__git_ps1() also has duplicated logic to build the
prompt gitstring.
Remove duplication of logic to build gitstring in
__git_ps1_colorize_gitstring() and __git_ps1().
Leave in __git_ps1_colorize_gitstring() only logic
to set color codes.
Signed-off-by: Eduardo R. D'Avila <erdavila@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
__git_ps1() is usually added to the prompt inside a command
substitution, imposing the overhead of fork()ing a subshell. Using
__git_ps1() for $PROMPT_COMMAND is slightly faster, because it avoids
that command substitution.
Mention this in the comments about setting up the git prompt.
The whole series speeds up the bash prompt on Windows/MSysGit
considerably. Here are some timing results in three scenarios, each
repeated 10 times:
At the top of the work tree, before:
$ time for i in {0..9} ; do prompt="$(__git_ps1)" ; done
real 0m1.716s
user 0m0.301s
sys 0m0.772s
After:
real 0m0.687s
user 0m0.075s
sys 0m0.396s
After, from $PROMPT_COMMAND:
$ time for i in {0..9} ; do __git_ps1 '\h:\w' '$ ' ; done
real 0m0.546s
user 0m0.075s
sys 0m0.181s
At the top of the work tree, detached head, before:
real 0m2.574s
user 0m0.376s
sys 0m1.207s
After:
real 0m1.139s
user 0m0.151s
sys 0m0.500s
After, from $PROMPT_COMMAND:
real 0m1.030s
user 0m0.245s
sys 0m0.336s
In a subdirectory, during rebase, stash status indicator enabled,
before:
real 0m3.557s
user 0m0.495s
sys 0m1.767s
After:
real 0m0.717s
user 0m0.120s
sys 0m0.300s
After, from $PROMPT_COMMAND:
real 0m0.577s
user 0m0.047s
sys 0m0.258s
On Linux the speedup ratio is comparable to Windows, but overall it
was about an order of magnitude faster to begin with. The last case
from above, repeated 100 times, before:
$ time for i in {0..99} ; do prompt="$(__git_ps1)" ; done
real 0m2.806s
user 0m0.180s
sys 0m0.264s
After:
real 0m0.857s
user 0m0.020s
sys 0m0.028s
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Before setting $PS1, __git_ps1() uses a command substitution to
redirect the output from a printf into a variable. Spare the overhead
of fork()ing a subshell by using 'printf -v <var>' to directly assign
the output to that variable.
zsh's printf doesn't support the '-v <var>' option, so stick with the
command substitution when under zsh.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
When enabled, the bash prompt can indicate the presence of untracked
files with a '%' sign. __git_ps1() checks for untracked files by running the
'$(git ls-files --others --exclude-standard)' command substitution,
and displays the indicator when there is no output.
Avoid this command substitution by additionally passing
'--error-unmatch *', and checking the command's return value.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
When the environment variable $GIT_PS1_SHOWSTASHSTATE is set
__git_ps1() checks the presence of stashes by running 'git rev-parse
--verify refs/stash'. This command not only checks that the
'refs/stash' ref exists but also, well, verifies that it's a valid
ref.
However, we don't need to be that thorough for the bash prompt. We
can omit that verification and only check whether 'refs/stash' exists
or not. Since 'git pack-refs' never packs 'refs/stash', it's a matter
of checking the existence of a ref file. Perform this check using
only bash builtins to spare the overhead of fork()+exec()ing a git
process.
Also run 'git pack-refs --all' in the corresponding test to document
that the prompt script depends on 'git pack-refs' not packing
'refs/stash' and to catch possible breakages should this behavior ever
change.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
When the dirty work tree and index status indicator is enabled,
__git_ps1() checks for changes in the index by running 'git diff-index
--cached --quiet HEAD --' and looking at its exit code. However, that
makes sense only when HEAD points to a valid commit: on an unborn
branch the failure of said command would be caused by the invalid
HEAD, not by changes in the index. Therefore, __git_ps1() first
checks for a valid HEAD by running 'git rev-parse --quiet --verify
HEAD'.
Since the previous patch we implicitly check HEAD's validity by
running 'git rev-parse ... --short HEAD', making the dirty status
indicator's 'git rev-parse' check redundant. It's sufficient to check
for non-emptyness of the variable holding the abbreviated commit
object name, thereby sparing the overhead of fork()+exec()ing a git
process.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
When describing a detached HEAD according to the $GIT_PS1_DESCRIBE
environment variable fails, __git_ps1() now runs the '$(git rev-parse
--short HEAD)' command substitution to get the abbreviated detached
HEAD commit object name. This imposes the overhead of fork()ing a
subshell and fork()+exec()ing a git process.
Avoid this overhead by combining this command substitution with the
"main" 'git rev-parse' execution for getting the path to the .git
directory & co. This means that we'll look for the abbreviated commit
object name even when it's not necessary, because we're on a branch or
the detached HEAD can be described. It doesn't matter, however,
because once 'git rev-parse' is up and running to fulfill all those
other queries, the additional overhead of looking for the abbreviated
commit object name is not measurable because it's lost in the noise.
There is a caveat, however, when we are on an unborn branch, because
in that case HEAD doesn't point to a valid commit, hence the query for
the abbreviated commit object name fails. Therefore, '--short HEAD'
must be the last options to 'git rev-parse' in order to get all the
other necessary information for the prompt even on an unborn branch.
Furthermore, in that case, and in that case only, 'git rev-parse'
doesn't output the last line containing the abbreviated commit object
name, obviously, so we have to take care to only parse it if 'git
rev-parse' exited without any error.
Although there are tests already excercising __git_ps1() on unborn
branches, they all do so implicitly. Add a test that checks this
explicitly.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
There are a couple of '$(git rev-parse --<opt>)' command substitutions
in __git_ps1() and three of them are executed in the main code path:
- the first to get the path to the .git directory ('--git-dir'),
- the second to check whether we're inside the .git directory
('--is-inside-git-dir'),
- and the last, depending on the results of the second, either
* to check whether it's a bare repo ('--is-bare-repository'), or
* to check whether inside a work tree ('--is-inside-work-tree').
Naturally, this imposes the overhead of fork()ing three subshells and
fork()+exec()ing three git commands.
Combine these four 'git rev-parse' queries into a single one and use
bash parameter expansions to parse the combined output, i.e. to
separate the path to the .git directory from the true/false of
'--is-inside-git-dir', etc. This way we can eliminate two of the
three subshells and git commands.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
__git_ps1() runs the '$(git symbolic-ref HEAD)' command substitution
to find out whether we are on a branch and to find out the name of
that branch. This imposes the overhead of fork()ing a subshell and
fork()+exec()ing a git process.
Since HEAD is in most cases a single-line file and the symbolic ref
format is quite simple to recognize and parse, read and parse it using
only bash builtins, thereby sparing all that fork()+exec() overhead.
Don't display the git prompt if reading HEAD fails, because a readable
HEAD is required for a git repository. HEAD can also be a symlink
symbolic ref (due to 'core.preferSymlinkRefs'), so use bash builtins
for reading HEAD only when HEAD is not a symlink.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
During an ongoing interactive rebase __git_ps1() finds out the name of
the rebased branch, the total number of patches and the number of the
current patch by executing a '$(cat .git/rebase-merge/<FILE>)' command
substitution for each. That is not quite the most efficient way to
read single line single word files, because it imposes the overhead of
fork()ing a subshell and fork()+exec()ing 'cat' several times.
Use the 'read' bash builtin instead to avoid those overheads.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
__git_ps1() finds out the path to the repository by using the
__gitdir() helper function. __gitdir() is basically just a wrapper
around 'git rev-parse --git-dir', extended with support for
recognizing a remote repository given as argument, to use the path
given on the command line, and with a few shortcuts to recognize a git
repository in cwd or at $GIT_DIR quickly without actually running 'git
rev-parse'. However, the former two is only necessary for the
completion script but makes no sense for the bash prompt, while the
latter shortcuts are performance optimizations __git_ps1() can do
without (they just avoid the overhead of fork()+exec()ing a git
process).
Run 'git rev-parse --git-dir' directly in __git_ps1(), because it will
allow this patch series to combine several $(git rev-parse ...)
command substitutions in the main code path, and the overall
performance benefit will far outweigh the loss of those few shortcuts
in __gitdir(). Furthermore, since __gitdir() is not needed anymore
for the prompt, remove it from the prompt script finally eliminating
its duplication between the prompt and completion scripts. Also
remove the comment from the completion script warning about this code
duplication.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
... to gain one level of indentation for the bulk of the function.
(The patch looks quite unreadable, you'd better check it with 'git
diff -w'.)
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
When describing a detached HEAD according to the $GIT_PS1_DESCRIBE
environment variable fails, __git_ps1() runs 'cut -c1-7 .git/HEAD' to
show the 7 hexdigits abbreviated commit object name in the prompt.
Obviously, this neither respects core.abbrev nor produces a unique
object name.
Fix this by using 'git rev-parse --short HEAD' instead and adjust the
corresponding test to use non-standard number of hexdigits.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
"git difftool" can take both revs to be compared and pathspecs.
"git show" takes revs, revs:path and pathspecs.
* rr/complete-difftool-fixup:
completion: show can take both revlist and paths
completion: difftool takes both revs and files
The files $g/rebase-{merge,apply}/{head-name,msgnum,end} are not
guaranteed to exist. When attempting to cat them, squelch the error
output.
In addition to guarding against stray directories, this patch addresses
a real problem:
# on terminal 1
$ git rebase -i master
# ignore editor, and switch to terminal 2
cat: .git/rebase-merge/msgnum: No such file or directory
cat: .git/rebase-merge/end: No such file or directory
$
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'git show' completion uses __git_complete_file (aliased to
__git_complete_revlist_file), because accepts <tree-ish>:<path> as
well as <commit-ish>. But the command also accepts range of commits
in A..B notation, so using __git_complete_revlist_file is more
appropriate.
There still remain two users of __git_complete_file, completions for
"archive" and "ls-tree". As these commands do not take range
notation, and "git show" no longer uses __git_complete_file, the
implementation of it can be updated not to complete ranges, but that
is a separate topic.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The bash prompt code (in contrib/) displayed the name of the branch
being rebased when "rebase -i/-m/-p" modes are in use, but not the
plain vanilla "rebase".
* fc/show-branch-in-rebase-am:
prompt: fix for simple rebase
zsh prompt script that borrowed from bash prompt script did not
work due to slight differences in array variable notation between
these two shells.
* tg/maint-zsh-svn-remote-prompt:
prompt: fix show upstream with svn and zsh
Prompt support (in contrib/) for zsh is updated to use colors.
* rr/zsh-color-prompt:
prompt: colorize ZSH prompt
prompt: factor out gitstring coloring logic
prompt: introduce GIT_PS1_STATESEPARATOR
'git difftool' is clearly a frontend to 'git diff' and is used in
exactly the same way, but it uses a misleadingly named completion
function __git_complete_file. It happens to work only because it
calls __git_complete_revlist_file that completes both revs and
paths.
Change it to use __git_complete_revlist_file, just like 'git diff'.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's _very_ slow in many cases, and there's really no point in fetching
*everything* from the remote just for completion. In many cases it might
be faster for the user to type the whole thing.
If the user manually specifies 'refs/*', then the full ls-remote
completion is triggered.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's better to check in multiple locations, so the user doesn't have to.
And update the documentation.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we are rebasing without options ('am' mode), the head rebased lives
in '$g/rebase-apply/head-name', so lets use that information so it's
reported the same way as if we were doing other rebases (-i or -m).
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently the __git_ps1 git prompt gives the following error with a
repository converted by git-svn, when used with zsh:
__git_ps1_show_upstream:19: bad pattern: svn_remote[
__git_ps1_show_upstream:45: bad substitution
To reproduce the problem, the __git_ps1_show_upstream function can be
executed in a repository converted with git-svn. Both those errors are
triggered by spaces after the '['.
Zsh also doesn't support initializing an array with `local var=(...)`.
This triggers the following error:
__git_ps1_show_upstream:41: bad pattern: svn_upstream=(commit
Use
local -a
var=(...)
instead to make is compatible.
This was introduced by 6d158cba (bash completion: Support "divergence
from upstream" messages in __git_ps1), when the script was for bash
only.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Acked-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
zsh completion wrapper doesn't reimplement __gitcompadd(). Although it
should be trivial to do that, let's use __gitcomp_nl() which achieves
exactly the same thing, specially since the suffix ($4) has to be empty.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add colors suitable for use in the ZSH prompt. Having learnt that the
ZSH equivalent of PROMPT_COMMAND is precmd (), you can now use
GIT_PS1_SHOWCOLORHINTS with ZSH.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
So that we can extend it with ZSH-colors in a later patch.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A typical prompt looks like:
artagnon|master *=:~/src/git$
^
why do we have this space?
Nobody has branch names that end with +, *, =, < or > anyway, so it
doesn't serve the purpose of disambiguation.
Make this separator configurable via GIT_PS1_STATESEPARATOR. This means
that you can set it to "" and get this prompt:
artagnon|master*=:~/src/git$
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The SVN::Fetcher module is now able to filter for inclusion as well
as exclusion (as used by --ignore-path). Also added tests, documentation
changes and git completion script.
If you have an SVN repository with many top level directories and you
only want a git-svn clone of some of them then using --ignore-path is
difficult as it requires a very long regexp. In this case it's much
easier to filter for inclusion.
[ew: remove trailing whitespace]
Signed-off-by: Paul Walmsley <pjwhams@gmail.com>
Signed-off-by: Eric Wong <normalperson@yhbt.net>
There's no need for a separate function; we can call
'emulate -k ksh func'.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
zsh is smart enough to add the right suffix while completing, there's no
point in trying to do the same as bash.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
224c2171 (remote.c: introduce remote.pushdefault, 2013-04-02)
introduced the remote.pushdefault configuration variable, but forgot
to teach git-completion.bash about it. Fix this.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
9f765ce (remote.c: introduce branch.<name>.pushremote, 2013-04-02)
introduced the configuration variable branch.*.pushremote, but forgot
to teach git-completion.bash about it. Fix this.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
complete: zsh: use zsh completion for the main cmd
complete: zsh: trivial simplification
git-completion.bash: complete branch.*.rebase as boolean
git-completion.bash: add diff.submodule to config list
git-completion.bash: lexical sorting for diff.statGraphWidth
So that we can have a nice zsh completion output:
% git <tab>
add -- add file contents to the index
bisect -- find by binary search the change that introduced a bug
branch -- list, create, or delete branches
checkout -- checkout a branch or paths to the working tree
clone -- clone a repository into a new directory
commit -- record changes to the repository
diff -- show changes between commits, commit and working tree, etc
fetch -- download objects and refs from another repository
grep -- print lines matching a pattern
init -- create an empty Git repository or reinitialize an existing one
log -- show commit logs
merge -- join two or more development histories together
mv -- move or rename a file, a directory, or a symlink
pull -- fetch from and merge with another repository or a local branch
push -- update remote refs along with associated objects
rebase -- forward-port local commits to the updated upstream head
reset -- reset current HEAD to the specified state
rm -- remove files from the working tree and from the index
show -- show various types of objects
status -- show the working tree status
tag -- create, list, delete or verify a tag object signed with GPG
And other niceties, like 'git --git-dir=<tab>' showing only directories.
For the rest, the bash completion stuff is still used.
Also, add my copyright, since this more than a thin wrapper.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There should be no functional changes.
The only reason I wrapped this code around a sub-function is because zsh
did the same in it's bashcompinit script in order to declare the special
variable 'words' as hidden, but only in this context.
There's no need for that any more since we access __git_main directly,
so 'words' is not modified, so there's no need for the sub-function.
In zsh mode the array indexes are different though.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
6fac1b83 (completion: add missing config variables, 2009-06-29) added
"rebase" to the list of completions for "branch.*.*", but forgot to
specify completions for the values that this configuration variable
can take (namely "false" and "true"). Fix this.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
c47ef57 (diff: introduce diff.submodule configuration variable,
2012-11-13) introduced the diff.submodule configuration variable, but
forgot to teach git-completion.bash about it. Fix this.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
df44483a (diff --stat: add config option to limit graph width,
2012-03-01) added the option diff.startGraphWidth to the list of
configuration variables in git-completion.bash, but failed to notice
that the list is sorted alphabetically. Move it to its rightful place
in the list.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Refactor the code into the only caller; __git_index_files().
Also, Somehow messing up with the 'path' variable messes up the 'PATH'
variable. So let's not do that.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Just like before fea16b4 (git-completion.bash: add support for path
completion).
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This way we don't need all the compat stuff, different filters, and so
on. Also, now we complete exactly the same in bash 3 and bash 4.
This is the way bash-completion did it for quite some time, when bash 3
was supported. For more information about the hack:
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=272660#64
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The calls to __gitcomp_file() are essentially the same, but with
different prefix.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
At the end of the day what we really need is to find out the files that
have been staged, or modified, because those files are the ones that
make sense to pass as arguments to 'git commit'.
We need diff-index to find those out, since 'git ls-files' doesn't do
that.
But we don't need wrappers and wrappers basically identical to the ones
used for 'git ls-files', when we can pretend it receives a --committable
option that would return what we need.
That way, we can remove a bunch of code without any functional changes.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Like the rest of the script does; let's not access COMPREPLY directly.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The only caller, __git_complete_index_file() doesn't specify any limits
to the options for 'git ls-files', neither should this function.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a rebase stops (e.g. interrupted by a merge conflict), it could
be useful to know how far a rebase has progressed and how many
commits in total this rebase will apply. Teach the __git_ps1()
command to display the number of commits so far applied and the
total number of commits to be applied, like this:
((3ec0a6a...)|REBASE 2/5)
In the example above the rebase has stopped at the second commit due to
a merge conflict and there are a total number of five commits to be
applied by this rebase.
This information can be already obtained from the following files which are
being generated during the rebase:
GIT_DIR/.git/rebase-merge/msgnum (git-rebase--merge.sh)
GIT_DIR/.git/rebase-merge/end (git-rebase--merge.sh)
GIT_DIR/.git/rebase-apply/next (git-am.sh)
GIT_DIR/.git/rebase-apply/last (git-am.sh)
but "rebase -i" does not leave necessary clues.
Implement this feature by doing these three things:
1) Modify git-rebase--interactive.sh to also create
GIT_DIR/.git/rebase-merge/msgnum
GIT_DIR/.git/rebase-merge/end
files for the number of commits so far applied and the total
number of commits to be applied.
2) Modify git-prompt.sh to read and display info from the above
files.
3) Update test t9903-bash-prompt.sh to reflect changes introduced
by this patch.
Signed-off-by: Zoltan Klinger <zoltan.klinger@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove one of two consecutive, identical blocks for "git commit -c".
This was caused by a mechanical mismerge at d931e2fb25 (Merge
branch 'mp/complete-paths', 2013-02-08). The side branch wanted to
add this block at fea16b47 but the same fix was done independently
at 685397585 already.
Signed-off-by: Mårten Kongstad <marten.kongstad@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We signal presense of untracked files by adding a per-cent sign '%'
to the prompt. But because '%' is used as an escape character to
introduce prompt customization in zsh (just like bash prompt uses
'\' to escape '\u', '\h', etc.), we need to say '%%' to get a
literal per-cent.
Helped-by: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
No need to calculate a new $c with a space if we are not going to do
anything it with it.
There should be no functional changes, except that a word "foo " with no
suffixes can't be matched. But $cur cannot have a space at the end
anyway. So it's safe.
Based on the code from SZEDER Gábor.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is no point in calling a separate function that is only used
in one place. Especially considering that there's no need to call
compgen, and we traverse the words ourselves both in __gitcompadd,
and __gitcomp_1.
Let's squash the functions together, and traverse only once.
This improves performance. For N number of words:
== 1 ==
original: 0.002s
new: 0.000s
== 10 ==
original: 0.005s
new: 0.001s
== 100 ==
original: 0.009s
new: 0.006s
== 1000 ==
original: 0.027s
new: 0.019s
== 10000 ==
original: 0.163s
new: 0.151s
== 100000 ==
original: 1.555s
new: 1.497s
No functional changes.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The functionality we use from compgen is not much, we can do the same
manually, with drastic improvements in speed, especially when dealing
with only a few words.
This patch also has the sideffect that brekage reported by Jeroen Meijer
and SZEDER Gábor gets fixed because we no longer expand the resulting
words.
Here are some numbers filtering N amount of words:
== 1 ==
original: 0.002s
new: 0.000s
== 10 ==
original: 0.002s
new: 0.000s
== 100 ==
original: 0.003s
new: 0.002s
== 1000 ==
original: 0.012s
new: 0.011s
== 10000 ==
original: 0.056s
new: 0.066s
== 100000 ==
original: 2.669s
new: 0.622s
If the results are not narrowed:
== 1 ==
original: 0.002s
new: 0.000s
== 10 ==
original: 0.002s
new: 0.001s
== 100 ==
original: 0.004s
new: 0.004s
== 1000 ==
original: 0.020s
new: 0.015s
== 10000 ==
original: 0.101s
new: 0.355s
== 100000 ==
original: 2.850s
new: 31.941s
So, unless 'git checkout <tab>' usually gives you more than 10000
results, you'll get an improvement :)
Other possible solutions perform better after 1000 words, but worst if
less than that:
COMPREPLY=($(awk -v cur="$3" -v pre="$2" -v suf="$4"
'$0 ~ cur { print pre$0suf }' <<< "$1" ))
COMPREPLY=($(printf -- "$2%s$4\n" $1 | grep "^$2$3"))
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The idea is to never touch the COMPREPLY variable directly.
This allows other completion systems (i.e. zsh) to override
__gitcompadd, and do something different instead.
Also, this allows further optimizations down the line.
There should be no functional changes.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There's no functional reason for those, the only purpose they are
supposed to serve is to say "we don't provide any words here", but
even for that it's not used consistently.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The prompt string generator did not notice when we are in a middle
of a "git revert" session.
* rr/prompt-revert-head:
bash: teach __git_ps1 about REVERT_HEAD
There was no Porcelain way to say "I no longer am interested in
this submodule", once you express your interest in a submodule with
"submodule init". "submodule deinit" is the way to do so.
* jl/submodule-deinit:
submodule: add 'deinit' command
A recent change added functions whose entire standard error stream
is redirected to /dev/null using a construct that is valid POSIX.1
but is not widely used:
funcname () {
cd "$1" && run some command "$2"
} 2>/dev/null
Even though this file is "git-completion.bash", zsh completion
support dot-sources it (instead of asking bash to grok it like tcsh
completion does), and zsh does not implement this redirection
correctly.
With zsh, trying to complete an inexistant directory gave this:
git add no-such-dir/__git_ls_files_helper💿2: no such file or directory: no-such-dir/
Also these functions use "cd" to first go somewhere else before
running a command, but the location the caller wants them to go that
is given as an argument to them should not be affected by CDPATH
variable the users may have set for their interactive session.
To fix both of these, wrap the body of the function in a subshell,
unset CDPATH at the beginning of the subshell, and redirect the
standard error stream of the subshell to /dev/null.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit fea16b47b6 (Fri Jan 11 19:48:43 2013, Manlio Perillo,
git-completion.bash: add support for path completion), introduced a new
__gitcomp_file function that uses the bash builtin "compgen". The
function was redefined for ZSH in the deprecated section of
git-completion.bash, but not in the new git-completion.zsh script.
As a result, users of git-completion.zsh trying to complete "git add
fo<tab>" get an error:
git add fo__gitcomp_file:8: command not found: compgen
This patch adds the redefinition and removes the error.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With "git submodule init" the user is able to tell git he cares about one
or more submodules and wants to have it populated on the next call to "git
submodule update". But currently there is no easy way he could tell git he
does not care about a submodule anymore and wants to get rid of his local
work tree (except he knows a lot about submodule internals and removes the
"submodule.$name.url" setting from .git/config together with the work tree
himself).
Help those users by providing a 'deinit' command. This removes the
whole submodule.<name> section from .git/config (either for the given
submodule(s) or for all those which have been initialized if '.' is used)
together with their work tree. Fail if the current work tree contains
modifications (unless forced), but don't complain when either the work
tree is already removed or no settings are found in .git/config.
Add tests and link the man pages of "git submodule deinit" and "git rm"
to assist the user in deciding whether removing or unregistering the
submodule is the right thing to do for him. Also add the deinit subcommand
to the completion list.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Minor clean up of if-then nesting in checks for environment variables
and config options. No functional changes.
Signed-off-by: Martin Erik Werner <martinerikwerner@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add diff.algorithm configuration so that the user does not type
"diff --histogram".
* mp/diff-algo-config:
diff: Introduce --diff-algorithm command line option
config: Introduce diff.algorithm variable
git-completion.bash: Autocomplete --minimal and --histogram for git-diff
Allows skipping the untracked check GIT_PS1_SHOWUNTRACKEDFILES
asks for the git-prompt (in contrib/) per repository.
* mw/bash-prompt-show-untracked-config:
t9903: add extra tests for bash.showDirtyState
t9903: add tests for bash.showUntrackedFiles
shell prompt: add bash.showUntrackedFiles option
Add a config option 'bash.showUntrackedFiles' which allows enabling
the prompt showing untracked files on a per-repository basis. This is
useful for some repositories where the 'git ls-files ...' command may
take a long time.
Signed-off-by: Martin Erik Werner <martinerikwerner@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This needs to be done in two places: __git_config_get_set_variables to
allow clever completion of "git config --local --get foo<tab>", and
_git_config to allow "git config --loc<tab>" to complete to --local.
While we're there, change the order of options in the code to match
git-config.txt.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "complete with known paths only" update to completion scripts
returns directory names without trailing slash to compensate the
addition of '/' done by bash that reads from our completion result.
tcsh completion code that reads from our internal completion result
does not add '/', so let it ask our complletion code to keep the '/'
at the end.
* mk/tcsh-complete-only-known-paths:
completion: handle path completion and colon for tcsh script
The completion script used to let the default completer to suggest
pathnames, which gave too many irrelevant choices (e.g. "git add"
would not want to add an unmodified path). Teach it to use a more
git-aware logic to enumerate only relevant ones.
* mp/complete-paths:
git-completion.bash: add support for path completion
Recent enhancements to git-completion.bash provide intelligent path
completion for git commands. Such completions do not provide the
'/' at the end of directories for recent versions of bash; instead,
bash itself will add the trailing slash to directories to the result
provided by git-completion.bash. However, the completion for tcsh
uses the result of the bash completion script directly, so it either
needs to add the necessary slash itself, or needs to ask the bash
script to keep the trailing slash.
Adding the slash itself is difficult because we have to check the
each path in the output of the bash script to see if it is meant to
be a directory or something else. For example, assuming there is a
directory named 'commit' in the current directory, then, when
completing
git add commit<tab>
we would need to add a slash, but for
git help commit<tab>
we should not.
Figuring out such differences would require adding much intelligence
to the tcsh completion script. Instead, it is simpler to ask the
bash script to keep the trailing slash. This patch does this.
Also, tcsh does not handle the colon as a completion separator so we
remove it from the list of separators.
Signed-off-by: Marc Khouzam <marc.khouzam@ericsson.com>
Scripts to test bash completion was inherently flaky as it was
affected by whatever random things the user may have on $PATH.
* jc/do-not-let-random-file-interfere-with-completion-tests:
t9902: protect test from stray build artifacts
Fix use of an array notation that older versions of bash do not
understand.
* bc/fix-array-syntax-for-3.0-in-completion-bash:
git-completion.bash: replace zsh notation that breaks bash 3.X
When you have random build artifacts in your build directory, left
behind by running "make" while on another branch, the "git help -a"
command run by __git_list_all_commands in the completion script that
is being tested does not have a way to know that they are not part
of the subcommands this build will ship. Such extra subcommands may
come from the user's $PATH. They will interfere with the tests that
expect a certain prefix to uniquely expand to a known completion.
Instrument the completion script and give it a way for us to tell
what (subset of) subcommands we are going to ship.
Also add a test to "git --help <prefix><TAB>" expansion. It needs
to show not just commands but some selected documentation pages.
Based on an idea by Jeff King.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a new command "git check-ignore" for debugging .gitignore
files.
The variable names may want to get cleaned up but that can be done
in-tree.
* as/check-ignore:
clean.c, ls-files.c: respect encapsulation of exclude_list_groups
t0008: avoid brace expansion
add git-check-ignore sub-command
setup.c: document get_pathspec()
add.c: extract new die_if_path_beyond_symlink() for reuse
add.c: extract check_path_for_gitlink() from treat_gitlinks() for reuse
pathspec.c: rename newly public functions for clarity
add.c: move pathspec matchers into new pathspec.c for reuse
add.c: remove unused argument from validate_pathspec()
dir.c: improve docs for match_pathspec() and match_pathspec_depth()
dir.c: provide clear_directory() for reclaiming dir_struct memory
dir.c: keep track of where patterns came from
dir.c: use a single struct exclude_list per source of excludes
Conflicts:
builtin/ls-files.c
dir.c
When commit d8b45314 began separating the zsh completion from the bash
completion, it introduced a zsh completion "bridge" section into the bash
completion script for zsh users to use until they migrated to the zsh
script. The zsh '+=()' append-to-array notation prevents bash 3.00.15 on
CentOS 4.x from loading the completion script and breaks test 9902. We can
easily work around this by using standard Bash array notation.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
An internal ls-tree call made by completion code only to probe if
a path exists in the tree recorded in a commit object leaked error
messages when the path is not there. It is not an error at all and
should not be shown to the end user.
* ds/completion-silence-in-tree-path-probe:
git-completion.bash: silence "not a valid object" errors
Update tcsh command line completion so that an unwanted space is
not added to a single directory name.
* mk/complete-tcsh:
Prevent space after directories in tcsh completion
Since command line options have higher priority than config file
variables and taking previous commit into account, we need a way
how to specify myers algorithm on command line. However,
inventing `--myers` is not the right answer. We need far more
general option, and that is `--diff-algorithm`.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some users or projects prefer different algorithms over others, e.g.
patience over myers or similar. However, specifying appropriate
argument every time diff is to be used is impractical. Moreover,
creating an alias doesn't play nicely with other tools based on diff
(git-show for instance). Hence, a configuration variable which is able
to set specific algorithm is needed. For now, these four values are
accepted: 'myers' (which has the same effect as not setting the config
variable at all), 'minimal', 'patience' and 'histogram'.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Even though --patience was already there, we missed --minimal and
--histogram for some reason.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The git-completion.bash script did not implemented full, git aware,
support to complete paths, for git commands that operate on files within
the current working directory or the index.
As an example:
git add <TAB>
will suggest all files in the current working directory, including
ignored files and files that have not been modified.
Support path completion, for git commands where the non-option arguments
always refer to paths within the current working directory or the index,
as follows:
* the path completion for the "git rm" and "git ls-files"
commands will suggest all cached files.
* the path completion for the "git add" command will suggest all
untracked and modified files. Ignored files are excluded.
* the path completion for the "git clean" command will suggest all
untracked files. Ignored files are excluded.
* the path completion for the "git mv" command will suggest all cached
files when expanding the first argument, and all untracked and cached
files for subsequent arguments. In the latter case, empty directories
are included and ignored files are excluded.
* the path completion for the "git commit" command will suggest all
files that have been modified from the HEAD, if HEAD exists, otherwise
it will suggest all cached files.
For all affected commands, completion will always stop at directory
boundary. Only standard ignored files are excluded, using the
--exclude-standard option of the ls-files command.
When using a recent Bash version, Git path completion will be the same
as builtin file completion, e.g.
git add contrib/
will suggest relative file names.
Signed-off-by: Manlio Perillo <manlio.perillo@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Trying to complete the command
git show master:./file
would cause a "Not a valid object name" error to be output on standard
error. Silence the error so it won't appear on the command line.
Signed-off-by: Dylan Smith <dylan.ah.smith@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If git-completion.bash returns a single directory as a completion,
tcsh will automatically add a space after it, which is not what the
user wants.
This commit prevents tcsh from doing this.
Also, a check is added to make sure the tcsh version used is recent
enough to allow completion to work as expected.
Signed-off-by: Marc Khouzam <marc.khouzam@ericsson.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The optional third parameter when __git_ps1 is used in
PROMPT_COMMAND mode as format string for printf to further
customize the way the git status string is embedded in the
user's PS1 prompt.
Signed-off-by: Simon Oosthoek <s.oosthoek@xs4all.nl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "-c" and "-C" options take an existing commit, so let's
complete refs, just as we would for --squash or --fixup.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The description of __git_ps1 function operating in two-arg mode was
not very clear. It said "set PROMPT_COMMAND=__git_ps1" which is not
the right usage for this mode, followed by "To customize the prompt,
do this", giving a false impression that those who do not want to
customize it can get away with no-arg form, which was incorrect.
Make it clear that this mode always takes two arguments, pre and
post, with an example.
The straight-forward one should be listed as the primary usage, and
the confusing one should be an alternate for advanced users. Swap
the order of these two.
Acked-by: Simon Oosthoek <s.oosthoek@xs4all.nl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For bash completion, the option '-o bashdefault' is used to indicate
that when no other choices are available, file completion should be
performed. Since this option is not available in tcsh, no file
completion is ever performed. Therefore, commands like 'git add ',
'git send-email ', etc, require the user to manually type out
the file name. This can be quite annoying.
To improve the user experience we try to simulate file completion
directly in this script (although not perfectly).
The known issues with the file completion simulation are:
- Possible completions are shown with their directory prefix.
- Completions containing shell variables are not handled.
- Completions with ~ as the first character are not handled.
Signed-off-by: Marc Khouzam <marc.khouzam@ericsson.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
GIT_PS1_DESCRIBE_STYLE was introduced in v1.6.3.2~35. Document it in the
header comments.
Signed-off-by: Anders Kaseorg <andersk@mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Otherwise the user might get something like:
git-completion.sh:2466: command not found: compdef
If this script is loaded before compinit. The script would work either
way, but let's not be more annoying to the user.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
tcsh users sometimes alias the 'git' command to another name. In
this case, the user expects to only have to issue a new 'complete'
command using the alias name.
However, the tcsh script currently uses the command typed by the
user to call the appropriate function in git-completion.bash, either
_git() or _gitk(). When using an alias, this technique no longer
works.
This change specifies the real name of the command (either 'git' or
'gitk') as a parameter to the script handling tcsh completion. This
allows the user to use any alias for the 'git' or 'gitk' commands,
while still getting completion to work.
A check for the presence of ${HOME}/.git-completion.bash is also
added to help the user make use of the script properly.
Signed-off-by: Marc Khouzam <marc.khouzam@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The user can be presented with invalid completion results
when trying to complete a 'git checkout' command. This can happen
when using a branch name prefix that matches multiple remote branches.
For example, if available branches are:
master
remotes/GitHub/maint
remotes/GitHub/master
remotes/origin/maint
remotes/origin/master
When performing completion on 'git checkout ma' the user will be
given the choices:
maint
master
However, 'git checkout maint' will fail in this case, although
completion previously said 'maint' was valid. Furthermore, when
performing completion on 'git checkout mai', no choices will be
suggested. So, the user is first told that the branch name
'maint' is valid, but when trying to complete 'mai' into 'maint',
that completion is no longer valid.
The completion results should never propose 'maint' as a valid
branch name, since 'git checkout' will refuse it.
The reason for this bug is that the uniq program only
works with sorted input. The man page states
"uniq prints the unique lines in a sorted file".
When __git_refs uses the guess heuristic employed by checkout for
tracking branches it wants to consider remote branches but only if
the branch name is unique. To do that, it calls 'uniq -u'. However
the input given to 'uniq -u' is not sorted.
Therefore, in the above example, when dealing with 'git checkout ma',
"__git_refs '' 1" will find the following list:
master
maint
master
maint
master
which, when passed to 'uniq -u' will remain the same. Therefore
'maint' will be wrongly suggested as a valid option.
When dealing with 'git checkout mai', the list will be:
maint
maint
which happens to be sorted and will be emptied by 'uniq -u',
properly ignoring 'maint'.
A solution for preventing the completion script from suggesting
such invalid branch names is to first call 'sort' and then 'uniq -u'.
Signed-off-by: Marc Khouzam <marc.khouzam@gmail.com>
Reviewed-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Updates __git_ps1 so that it can be used as $PROMPT_COMMAND,
instead of being used for command substitution in $PS1, to embed
color escape sequences in its output.
* so/prompt-command:
coloured git-prompt: paint detached HEAD marker in red
Fix up colored git-prompt
show color hints based on state of the git tree
Allow __git_ps1 to be used in PROMPT_COMMAND
Zsh's bash completion emulation is buggy, not properly maintained, and
we have some workarounds in place for different bugs that appeared in
various versions.
Since I'm the only one that has worked on that code lately[1], it might make
snese to use the code I wrote specifically for git.
The advantages are:
1) Less workarounds
* No need to hack __get_comp_words_by_ref
* No need to hack IFS or words
2) Improved features
* 'git show master' now properly adds a space at the end (IFS bug)
* 'git checkout --conflict=' now properly returns the sub-items
(missing feature)
3) Consolidated code
* It's all now in a single chunk, and it's basically the same as
git-completion.zsh
Since there's some interest in moving the zsh-specific code out of this
script, lets go ahead and warn the users that they should be using
git-completion.zsh.
[1] http://zsh.git.sourceforge.net/git/gitweb.cgi?p=zsh/zsh;a=history;f=Completion/bashcompinit
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It seems there's always issues with zsh's bash completion emulation.
I've tried to fix as many as I could[1], and most of the fixes are already
in the latest version of zsh, but still, there are issues.
There is no point going through all that pain; the emulation is easy to
achieve, and this patch works better than zsh's bash completion
emulation.
[1] http://zsh.git.sourceforge.net/git/gitweb.cgi?p=zsh/zsh;a=commitdiff;h=23907bb840c80eef99eabba17e086e44c9b2d3fc
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current tcsh-completion support for Git, as can be found on the
Internet, takes the approach of defining the possible completions
explicitly. This has the obvious draw-back to require constant
updating as the Git code base evolves.
The approach taken by this commit is to to re-use the advanced bash
completion script and use its result for tcsh completion. This is
achieved by sourcing the bash script and outputting the completion
result for tcsh consumption.
Three solutions were looked at to implement this approach with (C)
being retained:
A) Modifications:
git-completion.bash and new git-completion.tcsh
Modify the existing git-completion.bash script to support
being sourced using bash (as now), but also executed using bash.
When being executed, the script will output the result of the
computed completion to be re-used elsewhere (e.g., in tcsh).
The modification to git-completion.bash is made not to be
tcsh-specific, but to allow future users to also re-use its
output. Therefore, to be general, git-completion.bash accepts a
second optional parameter, which is not used by tcsh, but could
prove useful for other users.
Pros:
1- allows the git-completion.bash script to easily be re-used
2- tcsh support is mostly isolated in git-completion.tcsh
Cons (for tcsh users only):
1- requires the user to copy both git-completion.tcsh and
git-completion.bash to ${HOME}
2- requires bash script to have a fixed name and location:
${HOME}/.git-completion.bash
B) Modifications:
git-completion.bash
Modify the existing git-completion.bash script to support
being sourced using bash (as now), but also executed using bash,
and sourced using tcsh.
Pros:
1- only requires the user to deal with a single file
2- maintenance more obvious for tcsh since it is entirely part
of the same git-completion.bash script.
Cons:
1- tcsh support could affect bash support as they share the
same script
2- small tcsh section must use syntax suitable for both tcsh
and bash and must be at the beginning of the script
3- requires script to have a fixed name and location:
${HOME}/.git-completion.sh (for tcsh users only)
C) Modifications:
New git-completion.tcsh
Provide a short tcsh script that generates another script
which extends git-completion.bash. This new script can be
used by tcsh to perform completion.
Pros:
1- tcsh support is entirely isolated in git-completion.tcsh
2- new tcsh script can be as complex as needed
Cons (for tcsh users only):
1- requires the user to copy both git-completion.tcsh and
git-completion.bash to ${HOME}
2- requires bash script to have a fixed name and location:
${HOME}/.git-completion.bash
3- sourcing the new script will generate a third script
Approach (C) was selected avoid any modification to git-completion.bash.
Signed-off-by: Marc Khouzam <marc.khouzam@gmail.com>
Reviewed-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The list of all git commands is computed from the output of 'git help
-a', which already includes 'help', so there is no need to explicitly
add it once more when computing the list of porcelain commands.
Note that 'help' wasn't actually offered twice because of this,
because Bash filters duplicates from possible completion words.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Paint the marker for normal state in green and detached state
in red, instead of the other way around.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The main point is to match the colors to be more close to the color
output of "git status -sb".
- the branchname is green, or in red when the HEAD is detached;
- the flags are either red or green for unstaged/staged and the
remaining flags get a different color or none at all.
Signed-off-by: Simon Oosthoek <s.oosthoek@xs4all.nl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By setting GIT_PS1_SHOW_COLORHINTS when using __git_ps1
as PROMPT_COMMAND, you will get color hints in addition to
a different character (*+% etc.) to indicate the state of
the tree.
Signed-off-by: Simon Oosthoek <s.oosthoek@xs4all.nl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Changes __git_ps1 to allow its use as PROMPT_COMMAND in bash
in addition to setting PS1 with __git_ps1 in a command substitution.
PROMPT_COMMAND has advantages for using color without running
into prompt-wrapping issues. Only by assigning \[ and \] to PS1
directly can bash know that these and the enclosed zero-width codes in
between don't count in the length of the prompt.
Signed-off-by: Simon Oosthoek <s.oosthoek@xs4all.nl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This reverts commit 25ae7cfd19.
That patch does fix expansion of weird variables in some
simple tests, but it also seems to break other things, like
expansion of refs by "git checkout".
While we're sorting out the correct solution, we are much
better with the original bug (people with metacharacters in
their completions occasionally see an error message) than
the current bug (ref completion does not work at all).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Describe what '=' means in the output of __git_ps1 when using
GIT_PS1_SHOWUPSTREAM, which was not previously described.
Signed-off-by: Jonathan "Duke" Leto <jonathan@leto.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As reported by Jeroen Meijer[1]; the current code doesn't deal properly
with items (tags, branches, etc.) that have ${} in them because they get
expaned by bash while using compgen.
A simple solution is to quote the items so they get expanded properly
(\$\{\}).
In order to achieve that I took bash-completion's quote() function,
which is rather simple, and renamed it to __git_quote() as per Jeff
King's suggestion.
Solves the original problem for me.
[1] http://article.gmane.org/gmane.comp.version-control.git/201596
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
t/perf: add "trash directory" to .gitignore
Add missing -z to git check-attr usage text for consistency with man page
git-jump: ignore (custom) prefix in diff mode
Documentation: indent-with-non-tab uses "equivalent tabs" not 8
completion: add --no-edit to git-commit
Finishing touches to the recently graduated topic to introduce
"git branch --set-upstream-to" option.
* cn/branch-set-upstream-to:
completion: complete branch name for "branch --set-upstream-to="
completion: add --set-upstream-to and --unset-upstream
All remote subcommands are spelled out words except 'rm'. 'rm', being a
popular UNIX command name, may mislead users that there are also 'ls' or
'mv'. Use 'remove' to fit with the rest of subcommands.
'rm' is still supported and used in the test suite. It's just not
widely advertised.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git difftool --dir-diff" learned to use symbolic links to prepare
temporary copy of the working tree when available.
* da/difftool-updates:
difftool: silence warning
Add Code Compare v2.80.4 as a merge / diff tool for Windows
mergetool,difftool: Document --tool-help consistently
difftool: Disable --symlinks on cygwin
difftool: Handle compare() returning -1
difftool: Wrap long lines for readability
difftool: Check all return codes from compare()
difftool: Handle finding mergetools/ in a path with spaces
difftool: Use symlinks when diffing against the worktree
difftool: Call the temp directory "git-difftool"
difftool: Move option values into a hash
difftool: Eliminate global variables
difftool: Simplify print_tool_help()
Code Compare is a commercial file comparison tool for Windows, see
http://www.devart.com/codecompare/
Version 2.80.4 added support for command line arguments preceded by a
dash instead of a slash. This is required for Git for Windows because
slashes in command line arguments get mangled with according to these
rules:
http://www.mingw.org/wiki/Posix_path_conversion
Signed-off-by: Sebastian Schuberth <sschuberth@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Split a rather heavy-ish "git completion" script out to create a
separate "git prompting" script, to help lazy-autoloading of the
completion part while making prompting part always available.
The __gitdir() helper function finds out the path of the git
repository by running 'git rev-parse --git-dir'. However, it has a
shortcut first to avoid the overhead of running a git command in a
subshell when the current directory is at the top of the work tree,
i.e. when it contains a '.git' subdirectory.
If the 'GIT_DIR' environment variable is set then it specifies the
path to the git repository, and the autodetection of the '.git'
directory is not necessary. However, $GIT_DIR is only taken into
acocunt by 'git rev-parse --git-dir', and the check for the '.git'
subdirectory is performed first, so it wins over the path given in
$GIT_DIR.
There are several completion (helper) functions that depend on
__gitdir(), and when the above case triggers the completion script
will do weird things, like offering refs, aliases, or stashes from a
different repository, or displaying wrong or broken prompt, etc.
So check first whether $GIT_DIR is set, and only proceed with checking
the '.git' directory in the current directory if it isn't. 'git
rev-parse' would also check whether the path in $GIT_DIR is a proper
'.git' directory, i.e. 'HEAD', 'refs/', and 'objects/' are present and
accessible, but we don't have to be that thorough for the bash prompt.
And we've lived with an equally permissive check for '.git' in the
current working directory for years anyway.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 7f02f3d7 (completion: rename internal helpers _git and _gitk,
2012-05-19) renamed said functions to _main_git() and _main_gitk(),
respectively. By convention the name of our git-completion-specific
functions start with '_git' or '__git' prefix, so rename those
functions once again to put them back into our "namespace". Use the
two underscore prefix, because _git_main() could be mistaken for the
completion function of the (not yet existing) 'git main' command.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The __gitdir function is duplicated between completion and prompt
scripts, and these definitions should not diverge; otherwise one of
them can be subtly broken depending on the order the user's shell
dot-sources them.
Leave a note to people who may want to touch one copy to make sure
they update the other one in sync. Hopefully this line would also
appear in the context of the patch to allow reviewers to notice a
patch that attempts to update only one of them.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
bash-completion 1.90 shipped with support to load completions
dynamically[1], which means the git completion script wouldn't be loaded
until the user types 'git <tab>'--this creates a problem to people using
__git_ps1(); that function won't be available when the shell is first
created.
For now distributions have workarounded this issue by moving the git
completion to the "compatdir"[2]; this of course is not ideal.
The solution, proposed by Kerrick Staley[3], is to split the git script
in two; the part that deals with __git_ps1() in one (i.e.
git-prompt.sh), and everything else in another (i.e.
git-completion.bash).
Another benefit of this is that zsh user that are not interested in the
bash completion can use it for their prompts, which has been tried
before[4].
The only slight issue is that __gitdir() would be duplicated, but this
is probably not a big deal.
So let's go ahead and move __git_ps1() to a new file.
While at this, I took the liberty to reformat the help text in the new
file.
[1] http://anonscm.debian.org/gitweb/?p=bash-completion/bash-completion.git;a=commitdiff;h=99c4f7f25f50a7cb2fce86055bddfe389effa559
[2] http://projects.archlinux.org/svntogit/packages.git/commit/trunk?h=packages/git&id=974380fabb8f9f412990b17063bf578d98c44a82
[3] http://mid.gmane.org/CANaWP3w9KDu57aHquRRYt8td_haSWTBKs7zUHy-xu0B61gmr9A@mail.gmail.com
[4] http://mid.gmane.org/1303824288-15591-1-git-send-email-mstormo@gmail.com
Cc: Kerrick Staley <mail@kerrickstaley.com>
Cc: Marius Storm-Olsen <mstormo@gmail.com>
Cc: Ville Skyttä <ville.skytta@iki.fi>
Cc: Dan McGee <dan@archlinux.org>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
No reason to have it executable. Every way this script is intended to be
used includes the 'source' command.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some people might be relying on _git and _gitk to define custom aliases,
unfortunately, commit 6b179ad (completion: add new __git_complete
helper) broke that support.
"bash: [: 1: unary operator expected"
This can be easily fixed by using __git_complete, but it's not meant to
be public.
Although _git and _gitk are probably not meant to be public, it's easy
to keep having support for them by having a wrapper to the proper
new function that is fully functional.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Would be useful to provide backwards compatibility for _git. Also, zsh
completion uses _git, and it cannot be changed.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This simplifies the completions, and would make it easier to define
aliases in the future.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use new __gitcomp_nl; this is the last place that uses COMPREPLY and
compgen directly outside __gitcomp* functions.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Acked-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The bash completion doesn't work when certain options to git itself are
specified, e.g. 'git --no-pager <TAB>' errors out with
error: invalid key: alias.--no-pager
The main _git() completion function finds out the git command name by
looping through all the words on the command line and searching for
the first word that is not a known option for the git command.
Unfortunately the list of known git options was not updated in a long
time, and newer options are not skipped but mistaken for a git command.
Such a misrecognized "command" is then passed to __git_aliased_command(),
which in turn passes it to a 'git config' query, hence the error.
Currently the following options are misrecognized for a git command:
-c --no-pager --exec-path --html-path --man-path --info-path
--no-replace-objects --work-tree= --namespace=
To fix this we could just update the list of options to be skipped,
but the same issue will likely arise, if the git command learns a new
option in the future. Therefore, to make it more future proof against
new options, this patch changes that loop to skip all option-looking
words, i.e. words starting with a dash.
We also have to handle the '-c' option specially, because it takes a
configutation parameter in a separate word, which must be skipped,
too.
[fc: added tests]
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"--exec-path" looks to the completion script like an unambiguous
successful completion, but it is wrong to emit a SP after it as if
declaring that we are done with completion; the user could be trying
to do
git --exec-path; # print name of helper directory
or
git --exec-path=/path/to/alternative/helper/dir <subcommand>
so the most helpful thing to do is to leave out the trailing space and
leave it to the operator to type an equal sign or carriage return
according to the situation.
[fc: added tests]
Cc: Andreas Schwab <schwab@linux-m68k.org>
Reported-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Certain versions of zsh seems to treat
local var=()
as a function declaration, rather than an assignment of an empty array,
although its documentation does not suggest that this should be the case.
With zsh 4.3.15 on Fedora Core 15, this causes
__git_ps1 " (%s)"
to trigger an error message:
local:2: command not found: svn_url_pattern
when GIT_PS1_SHOWUPSTREAM="auto".
Signed-off-by: Alex Merry <dev@randomguy3.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By Zbigniew Jędrzejewski-Szmek (8) and Junio C Hamano (1)
* zj/diff-stat-dyncol:
: This breaks tests. Perhaps it is not worth using the decimal-width stuff
: for this series, at least initially.
diff --stat: add config option to limit graph width
diff --stat: enable limiting of the graph part
diff --stat: add a test for output with COLUMNS=40
diff --stat: use a maximum of 5/8 for the filename part
merge --stat: use the full terminal width
log --stat: use the full terminal width
show --stat: use the full terminal width
diff --stat: use the full terminal width
diff --stat: tests for long filenames and big change counts
Config option diff.statGraphWidth=<width> is equivalent to
--stat-graph-width=<width>, except that the config option is ignored
by format-patch.
For the graph-width limiting to be usable, it should happen
'automatically' once configured, hence the config option.
Nevertheless, graph width limiting only makes sense when used on a
wide terminal, so it should not influence the output of format-patch,
which adheres to the 80-column standard.
Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The style used for incrementing and decrementing variables was fairly
inconsistenty and was normalized to use x++, or ((x++)) in contexts
where the former would otherwise be interpreted as a command. This is a
bash-ism, but for obvious reasons this script is already bash-specific.
Signed-off-by: Philip Jägenstedt <philip@foolip.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Complete <name> only for set-url. For set-branches and
set-head, complete <name> and <branch> over the network,
like e.g. git pull already does.
Signed-off-by: Philip Jägenstedt <philip@foolip.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
CodingGuidlines confidently declares "We use tabs for indentation."
It would be a shame if it were caught lying.
Signed-off-by: Philip Jägenstedt <philip@foolip.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It was out-of-sync with the reality of who works on this
script. Defer (silently) to Documentation/SubmittingPatches
like all other code.
Signed-off-by: Philip Jägenstedt <philip@foolip.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* 'master' of git://bogomips.org/git-svn:
git-svn.perl: fix a false-positive in the "already exists" test
git-svn.perl: perform deletions before anything else
git-svn: Fix time zone in --localtime
git-svn: un-break "git svn rebase" when log.abbrevCommit=true
git-svn: remove redundant porcelain option to rev-list
completion: add --interactive option to git svn dcommit
* fc/zsh-completion:
completion: simplify __gitcomp and __gitcomp_nl implementations
completion: use ls -1 instead of rolling a loop to do that ourselves
completion: work around zsh option propagation bug
see afd7f1e for more details on git svn dcommit --interactive
Signed-off-by: Frederic Heitzmann <frederic.heitzmann@gmail.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
If the argument for `__git_ps1` begins with a dash, `printf` tries to
interpret it as an option which results in an error message.
The problem is solved by adding '--' before the argument to tell
`printf` to not interpret the following argument as an option.
Adding '--' directly to the argument does not help because the argument
is enclosed by double quotes.
Signed-off-by: Christian Hammerl <info@christian-hammerl.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* fc/zsh-completion:
completion: simplify __gitcomp and __gitcomp_nl implementations
completion: use ls -1 instead of rolling a loop to do that ourselves
completion: work around zsh option propagation bug
These shell functions are written in an unnecessarily verbose way;
simplify their "conditionally use $<number> after checking $# against
<number>" logic by using shell's built-in conditional substitution
facilities.
Also remove the first of the two assignments to IFS in __gitcomp_nl
that does not have any effect.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This simplifies the code a great deal. In particular, it allows us to
get rid of __git_shopt, which is used only in this fuction to enable
'nullglob' in zsh.
[jn: squashed with a patch that actually gets rid of __git_shopt]
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When listing commands in zsh (git <TAB><TAB>), all of them will show up,
instead of only porcelain ones.
The root cause of this is because zsh versions from 4.3.0 to present
(4.3.15) do not correctly propagate the SH_WORD_SPLIT option into the
subshell in ${foo:=$(bar)} expressions. Because of this bug, the list of
all commands was treated as a single word in __git_list_porcelain_commands
and did not match any of the patterns that would usually cause plumbing to
be excluded.
With problematic versions of zsh, after running
emulate sh
fn () {
var='one two'
for v in $var; do echo $v; done
}
x=$(fn)
: ${y=$(fn)}
printing "$x" results in two lines as expected, but printing "$y" results
in a single line because $var is expanded as a single word when evaluating
fn to compute y.
So avoid the construct, and use an explicit 'test -n "$foo" || foo=$(bar)'
instead.
[jn: clarified commit message, indentation style fix]
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
zsh adds a backslash (foo\ ) for each item in the COMPREPLY array if IFS
doesn't contain spaces. This issue has been reported[1], but there is no
solution yet.
This wasn't a problem due to another bug[2], which was fixed in zsh
version 4.3.12. After this change, 'git checkout ma<tab>' would resolve
to 'git checkout master\ '.
Aditionally, the introduction of __gitcomp_nl in commit a31e626
(completion: optimize refs completion) in git also made the problem
apparent, as Matthieu Moy reported.
The simplest and most generic solution is to hide all the changes we do
to IFS, so that "foo \nbar " is recognized by zsh as "foo bar". This
works on versions of git before and after the introduction of
__gitcomp_nl (a31e626), and versions of zsh before and after 4.3.12.
Once zsh is fixed, we should conditionally disable this workaround to
have the same benefits as bash users.
[1] http://www.zsh.org/mla/workers/2012/msg00053.html
[2] http://zsh.git.sourceforge.net/git/gitweb.cgi?p=zsh/zsh;a=commitdiff;h=2e25dfb8fd38dbef0a306282ffab1d343ce3ad8d
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We use the 'read' command without -r, so that it treats '\' as an
escape character, in several places. This breaks the loop reading
refnames from git-for-each-ref in __git_refs() if there are refnames
such as "foo'bar", in which case for-each-ref helpfully quotes them as
$ git update-ref "refs/remotes/test/foo'bar" HEAD
$ git for-each-ref --shell --format="ref=%(refname:short)" "refs/remotes"
ref='test/foo'\''bar'
Interpolating the \' here will read "ref='test/foo'''bar'" instead, and
eval then chokes on the unbalanced quotes.
However, since none of the read loops _want_ to have backslashes
interpolated, it's much safer to use read -r everywhere.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* sg/complete-refs:
completion: remove broken dead code from __git_heads() and __git_tags()
completion: fast initial completion for config 'remote.*.fetch' value
completion: improve ls-remote output filtering in __git_refs_remotes()
completion: query only refs/heads/ in __git_refs_remotes()
completion: support full refs from remote repositories
completion: improve ls-remote output filtering in __git_refs()
completion: make refs completion consistent for local and remote repos
completion: optimize refs completion
completion: document __gitcomp()
Conflicts:
contrib/completion/git-completion.bash
Commit e5b8eebc (completion: fix issue with process substitution not
working on Git for Windows, 2011-10-26) introduced a new variable in
__git_ps1_show_upstream(), but didn't declare it as local to prevent it
from leaking into the environment.
We may want to rewrite it like the following, but that can wait until the
next cycle.
while read key value
do
...
done <<-EOF
$(git config -z --get-regexp ...)
EOF
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git for Windows comes with a bash that doesn't support process substitution.
It issues the following error when using git-completion.bash with
GIT_PS1_SHOWUPSTREAM set:
$ export GIT_PS1_SHOWUPSTREAM=1
sh.exe": cannot make pipe for process substitution: Function not implemented
sh.exe": cannot make pipe for process substitution: Function not implemented
sh.exe": <(git config -z --get-regexp '^(svn-remote\..*\.url|bash\.showupstream)$' 2>/dev/null | tr '\0\n' '\n '): ambiguous redirect
Replace the process substitution with a 'here string'.
Signed-off-by: Stefan Naewe <stefan.naewe@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
__git_heads() was introduced in 5de40f5 (Teach bash about
git-repo-config., 2006-11-27), and __git_tags() in 88e21dc (Teach bash
about completing arguments for git-tag, 2007-08-31). As their name
suggests, __git_heads() is supposed to list only branches, and
__git_tags() only tags.
Since their introduction both of these functions consist of two
distinct parts. The first part gets branches or tags, respectively,
from a local repositoty using 'git for-each-ref'. The second part
queries a remote repository given as argument using 'git ls-remote'.
These remote-querying parts are broken in both functions since their
introduction, because they list both branches and tags from the remote
repository. (The 'git ls-remote' query is not limited to list only
heads or tags, respectively, and the for loop filtering the query
results prints everything except dereferenced tags.) This breakage
could be easily fixed by passing the '--heads' or '--tags' options or
appropriate refs patterns to the 'git ls-remote' invocations.
However, that no one noticed this breakage yet is probably not a
coincidence: neither of these two functions were used to query a
remote repository, the remote-querying parts were dead code already
upon thier introduction and remained dead ever since.
Since those parts of code are broken, are and were never used, stop
the bit-rotting and remove them.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Refspecs for branches in a remote repository start with 'refs/heads/',
so completing those refspecs with 'git config remote.origin.fetch
<TAB>' always offers 'refs/heads/' first, because that's the unique
part of the possible refspecs. But it does so only after querying the
remote with 'git ls-remote', which can take a while when the request
goes through some slower network to a remote server.
Don't waste the user's time and offer 'refs/heads/' right away for
'git config remote.origin.fetch <TAB>'.
The reason for putting 'refs/heads/' directly into COMPREPLY instead
of using __gitcomp() is to avoid __gitcomp() adding a trailing space.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
