Asciidoctor versions v1.5.7 or later print the following warning while
building the documentation:
ASCIIDOC technical/api-config.html
asciidoctor: WARNING: api-config.txt: line 232: unterminated listing block
This highlight an issue (even with older Asciidoctor versions) where
the length of the '----' lines surrounding a code example don't match,
and the rest of the document is rendered in monospace.
Fix this by making sure that the length of those lines match.
The page rendered with AsciiDoc doesn't have this formatting issue.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Asciidoctor versions v1.5.7 or later print the following warning while
building the documentation:
ASCIIDOC git-diff-tree.xml
asciidoctor: WARNING: diff-format.txt: line 2: unterminated listing block
This highlights an issue (even with older Asciidoctor versions) where
the "Raw output format" header is not rendered as a header, and the
rest of the document is rendered in monospace. This is not caused by
'diff-format.txt' in itself, but rather by 'git-diff-tree.txt'
including 'pretty-formats.txt' and 'diff-format.txt' on subsequent
lines, while the former happens to end with monospace-formatted
example commands.
Fix this by inserting an empty line between the two include::
directives.
The page rendered with AsciiDoc doesn't have this formatting issue.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current wildmatch() call for includeIf's gitdir pattern does not
pass the WM_PATHNAME flag. Without this flag, '*' is treated _almost_
the same as '**' (because '*' also matches slashes) with one exception:
'/**/' can match a single slash. The pattern 'foo/**/bar' matches
'foo/bar'.
But '/*/', which is essentially what wildmatch engine sees without
WM_PATHNAME, has to match two slashes (and '*' matches nothing). Which
means 'foo/*/bar' cannot match 'foo/bar'. It can only match 'foo//bar'.
The result of this is the current wildmatch() call works most of the
time until the user depends on '/**/' matching no path component. And
also '*' matches slashes while it should not, but people probably
haven't noticed this yet. The fix is straightforward.
Reported-by: Jason Karns <jason.karns@gmail.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On Windows, for example, executables (must) have the extension `.exe`.
Our `check-docs` target was not prepared for that.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we want to see what commands are listed in `command-list.txt` but
not installed, we currently include lines that refer to guides, e.g.
`gitattributes` or `gitcli`.
Let's not include those lines, as they are not referring to commands.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As part of the `check-docs` target, we verify that commands that are
documented are actually in the current list of commands to be built.
However, this logic broke in 5fafce0b78 (check-docs: get documented
command list from Makefile, 2012-08-08), when we tried to make the logic
safer by not looking at the files in the worktree, but at the list of
files to be generated in `Documentation/Makefile`. While this was the
right thing to do, it failed to accommodate for the fact that `make -C
Documentation/ print-man1`, unlike `ls Documentation/*.txt`, would *not*
print lines starting with the prefix `Documentation/`.
At long last, let's fix this.
Note: This went undetected due to a funny side effect of the
`ALL_PROGRAMS` variable starting with a space. That space, together with
the extra space we inserted before `$(ALL_PROGRAMS)` in the
case " $(ALL_PROGRAMS)" in
*" $$cmd ")
[...]
construct, is responsible that this case arm is used when `cmd` is empty
(which was clearly not intended to be the case).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 7ded055401 (build: do not install git-remote-testgit, 2013-06-07),
we do not install it. Therefore it makes no sense to document it,
either.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is currently in section 1, but that section is intended for
"Executable programs or shell commands".
A more appropriate place is section 7: "Miscellaneous (including macro
packages and conventions), e.g. man(7), groff(7)".
This issue should have been detected earlier by `make check-docs`, but
was missed due to a bug in that Makefile target (that we are about to
fix).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
diff_opt_parse() is a heavy hammer to just set diff filter. But it's
the only way because of the diff_status_letters[] mapping. Add a new
API to set diff filter and use it in git-am. diff_opt_parse()'s only
remaining call site in revision.c will be gone soon and having it here
just because of git-am does not make sense.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While at there, move exit() back to the caller. It's easier to see the
flow that way than burying it in diff-no-index.c
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Diff's internal option parsing is now done with 'struct option', which
makes it possible to combine all diff options to range-diff and parse
everything all at once. Parsing code becomes simpler, and we get a
looong 'git range-diff -h'
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This option is added in commit b73bcbac4a (diff: allow
--no-color-moved-ws - 2018-11-23) in pw/diff-color-moved-ws-fix. To ease
merge conflict resolution, re-implement the option handling here so that
the conflict could be resolved by taking this side of change.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mark one more string for translation while at there
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
OPT__ABBREV() has the same behavior as the deleted code with one
difference: it does check for valid number and error out if not. And the
'40' change is self explanatory.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While at it, mark one more string for translation
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While at it, mark one more string for translation.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mark one more string for translation while at there.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is a remnant from early versions of the commit-graph patch series
[1], when 'git commit-graph --write' printed the hash of the created
commit-graph file, and tests did look at the command's output, because
the commit-graph file's name included that hash as well.
[1] https://public-inbox.org/git/1517348383-112294-6-git-send-email-dstolee@microsoft.com/
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using protocol v0, upload-pack over HTTP permits a "half-auth"
configuration in which, at the web server layer, the info/refs path is
not protected by authentication but the git-upload-pack path is, so that
a user can perform fetches that do not download any objects without
authentication, but still needs authentication to download objects.
But protocol v2 does not support this, because both ref and pack are
obtained from the git-upload-pack path.
Mark the test verifying this behavior as protocol v0-only, with a
description of what needs to be done to make v2 support this.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we switched off CURLOPT_FAILONERROR in 17966c0a63 (http: avoid
disconnecting on 404s for loose objects, 2016-07-11), the fetch_object()
function started manually handling 404's. Since we now have
normalize_curl_result() for use elsewhere, we can use it here as well,
shortening the code.
Note that we lose the check for http/https in the URL here. None of the
other result-normalizing code paths bother with this. Looking at
missing_target(), which checks specifically for an FTP-specific CURLcode
and "http" code 550, it seems likely that git-over-ftp has been subtly
broken since 17966c0a63. This patch does nothing to fix that, but nor
should it make anything worse (in fact, it may be slightly better
because we'll actually recognize an error as such, rather than assuming
CURLE_OK means we actually got some data).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the dumb-http walker encounters a 404 when fetching a loose object,
it then looks at any http-alternates for the object. The 404 check is
implemented by missing_target(), which checks not only the http code,
but also that we got an http error from the CURLcode.
That broke when we stopped using CURLOPT_FAILONERROR in 17966c0a63
(http: avoid disconnecting on 404s for loose objects, 2016-07-11), since
our CURLcode will now be CURLE_OK. As a result, fetching over dumb-http
from a repository with alternates could result in Git printing "Unable
to find abcd1234..." and aborting.
We could probably fix this just by loosening missing_target(). However,
there's other code which looks at the curl result, and it would have to
be tweaked as well. Instead, let's just normalize the result the same
way the smart-http code does.
There's a similar case in processing the alternates (where we failover
from "info/http-alternates" to "info/alternates"). We'll give it the
same treatment.
After this patch, we should be hitting all code paths that need this
normalization (notably absent here is the http_pack_request path, but it
does not use FAILONERROR, nor missing_target()).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We make some requests with CURLOPT_FAILONERROR and some without, and
then handle_curl_result() normalizes any failures to a uniform CURLcode.
There are some other code paths in the dumb-http walker which don't use
handle_curl_result(); let's pull the normalization into its own function
so it can be reused.
Arguably those code paths would benefit from the rest of
handle_curl_result(), notably the auth handling. But retro-fitting it
now would be a lot of work, and in practice it doesn't matter too much
(whatever authentication we needed to make the initial contact with the
server is generally sufficient for the rest of the dumb-http requests).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
I did something stupid today and got
$ git commit -a --fixup= @^
fatal: Paths with -a does not make sense.
which didn't make any sense (at least for the first few seconds).
Include the first path(spec) in the error message to help spot the
problem quicker. Now it shows
fatal: paths '@^ ...' with -a does not make sense
which should ring some bell because @^ should clearly not be considered
a path.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When deleting refs, we hold packed-refs.lock and prepare a packed
transaction to drop the refs from the packed-refs file. If it turns out
that we don't need to rewrite the packed refs (e.g., because none of the
deletions were present in the file), then we abort the transaction.
If that abort succeeds, then the transaction struct will have been
freed, and we set our local pointer to NULL so we don't look at it
again.
However, if it fails, then the struct will _still_ have been freed
(because ref_transaction_abort() always frees). But we don't clean up
the pointer, and will jump to our cleanup code, which will try to abort
it again, causing a use-after-free.
It's actually impossible for this to trigger in practice, since
packed_transaction_abort() will never return anything but success. But
let's fix it anyway, since that's more than we should assume about the
packed-refs code (after all, we are already bothering to check for an
error result which cannot be triggered).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In files_transaction_prepare(), if we have to delete some refs, we use a
subordinate packed_transaction to do so. It's rare for that
sub-transaction's prepare step to fail, since we hold the packed-refs
lock. But if it does, we trigger a BUG() due to these steps:
- we've attached the packed transaction to the files transaction as
backend_data->packed_transaction
- when the prepare step fails, the packed transaction cleans itself
up, putting itself into the CLOSED state
- the error value from preparing the packed transaction lets us know
in files_transaction_prepare() that we should also clean up and
return an error. We call files_transaction_cleanup(), which tries to
abort backend_data->packed_transaction. Since it's already CLOSED,
that triggers an assertion in ref_transaction_abort().
We can fix that by disconnecting the packed transaction from the outer
files transaction, and then free-ing (not aborting!) it ourselves.
A few other options/alternatives I considered:
- we could just make it a noop to abort a CLOSED transaction. But that
seems less safe, since clearly this code expects (and enforces) a
particular set of state transitions.
- we could have files_transaction_cleanup() selectively call abort()
vs free() based on the state of the on the packed transaction.
That's basically a more restricted version of the above, but also
potentially unsafe.
- instead of disconnecting backend_data->packed_transaction on error,
we could wait to install it until we successfully prepare. That
might make the flow a little simpler, but it introduces a hassle.
Earlier parts of files_transaction_prepare() that encounter an error
will jump to the cleanup label, and expect that cleaning up the
outer transaction will clean up the packed transaction, too. We'd
have to adjust those sites to clean up the packed transaction.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach `multi-pack-index verify` to sort the set of object by
packfile so that only one packfile needs to be open at a time.
This is a performance improvement. Previously, objects were
verified in OID order. This essentially requires all packfiles
to be open at the same time. If the number of packfiles exceeds
the open file limit, packfiles would be LRU-closed and re-opened
many times.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add progress indicators to more parts of midx verify.
Use sparse progress indicator for object iteration.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Log multi-pack-index command mode.
Log number of objects and packfiles in the midx.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add new start_sparse_progress() and start_delayed_sparse_progress()
constructors and "sparse" flag to struct progress.
Teach stop_progress() to force a 100% complete progress message before
printing the final "done" message when "sparse" is set.
Calling display_progress() for every item in a large set can
be expensive. If callers try to filter this for performance
reasons, such as emitting every k-th item, progress would
not reach 100% unless they made a final call to display_progress()
with the item count before calling stop_progress().
Now this is automatic when "sparse" is set.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If you have staged changes in path A and perform 'checkout
--merge' (which could result in conflicts in a totally unrelated path
B), changes in A will be gone. Which is unexpected. We are supposed
to keep all changes, or kick and scream otherwise.
This is the result of how --merge is implemented, from the very first
day in 1be0659efc (checkout: merge local modifications while switching
branches., 2006-01-12):
1. a merge is done, unmerged entries are collected
2. a hard switch to a new branch is done, then unmerged entries added
back
There is no trivial fix for this. Going with 3-way merge one file at a
time loses rename detection. Going with 3-way merge by trees requires
teaching the algorithm to pick up staged changes. And even if we detect
staged changes with --merge and abort for safety, an option to continue
--merge is very weird. Such an option would keep worktree changes, but
drop staged changes.
Because the problem has been with us since the introduction of --merge
and everybody has been pretty happy (except Phillip, who found this
problem), I'll just take a note here to acknowledge it and wait for
merge wizards to come in and work their magic. There may be a way
forward [1].
[1] CABPp-BFoL_U=bzON4SEMaQSKU2TKwnOgNqjt5MUaOejTKGUJxw@mail.gmail.com
Reported-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Phillip found out that 'git checkout -f <branch>' does not restore
conflict/unmerged files correctly. All tracked files should be taken
from <branch> and all non-zero stages removed. Most of this is true,
except that the final file could be in stage one instead of zero.
"checkout -f" (among other commands) does this with one-way merge, which
is supposed to take stat info from the index and everything else from
the given tree. The add_entry(.., old, ...) call in oneway_merge()
though will keep stage index from the index.
This is normally not a problem if the entry from the index is
normal (stage #0). But if there is a conflict, stage #0 does not exist
and we'll get stage #1 entry as "old" variable, which gets recorded in
the final index. Fix it by clearing stage mask.
This bug probably comes from b5b425074e (git-read-tree: make one-way
merge also honor the "update" flag, 2005-06-07). Before this commit, we
may create the final ("dst") index entry from the one in index, but we
do clear CE_STAGEMASK.
I briefly checked two- and three-way merge functions. I think we don't
have the same problem in those.
Reported-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "--sort" parameter of for-each-ref, etc, does not handle negation,
and instead returns an error to the parse-options code. But neither
piece of code prints anything for the user, which may leave them
confused:
$ git for-each-ref --no-sort
$ echo $?
129
As the comment in the callback function notes, this probably should
clear the list, which would make it consistent with other list-like
options (i.e., anything that uses OPT_STRING_LIST currently).
Unfortunately that's a bit tricky due to the way the ref-filter code
works. But in the meantime, let's at least make the error a little less
confusing:
- switch to using PARSE_OPT_NONEG in the option definition, which will
cause the options code to produce a useful message
- since this was cut-and-pasted to four different spots, let's define
a single OPT_REF_SORT() macro that we can use everywhere
- the callback can use BUG_ON_OPT_NEG() to make sure the correct flags
are used (incidentally, this also satisfies -Wunused-parameters,
since we're now looking at "unset")
- expand the comment into a NEEDSWORK to make it clear that the
direction is right, but the details need to be worked out
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As we made --list-cmds read the local configuration file in an
earlier step, the completion.commands variable respects repo-level
configuration. Use __git which ensures that the proper repo config
is consulted if the command line contains 'git -C /some/other/repo'.
Suggested-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Todd Zullinger <tmz@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 6532f3740b ("completion: allow to customize the completable
command list", 2018-05-20) tried to allow multiple space-separated
entries in completion.commands. To do this, it copies each parsed token
into a strbuf so that the result is NUL-terminated.
However, for tokens starting with "-", it accidentally passes the
original non-terminated string, meaning that only the final one worked.
Switch to using the strbuf.
Reported-by: Todd Zullinger <tmz@pobox.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
6532f3740b ("completion: allow to customize the completable command
list", 2018-05-20) added the completion.commands config variable.
Multiple commands may be added or removed, separated by a space.
Demonstrate the failure of multiple removals.
Signed-off-by: Todd Zullinger <tmz@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Normally code that is checking config before we've decided to do
setup_git_directory() would use read_early_config(), which uses
discover_git_directory() to tentatively see if we're in a repo,
and if so to add it to the config sequence.
But list_cmds() uses the caching configset mechanism which
rightly does not use read_early_config(), because it has no
idea if it's being called early.
Call setup_git_directory_gently() so we can pick up repo-level
config (like completion.commands).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the scripted 'git stash show' when no arguments are passed, we just
pass '--stat' to 'git diff'. When any argument is passed to 'stash
show', we no longer pass '--stat' to 'git diff', and pass whatever
flags are passed directly through to 'git diff'.
By default 'git diff' shows the patch output. So when a user uses
'git stash show --patience', they would be shown the diff as expected,
using the patience algorithm. '--patience' in this case only changes
the diff algorithm, but does not cause 'git diff' to show the diff by
itself. The diff is shown because that's the default behaviour of
'git diff'.
In the C version of 'git stash show', we try to emulate that behaviour
using the internal diff API. However we forgot to set up the default
output format, in case it wasn't set by any of the flags that were
passed through. So 'git stash show --patience' in the builtin version
of stash would be completely silent, while it would show the diff in
the scripted version.
The same thing would happen for other flags that only affect the way a
patch is displayed, rather than switching to a different output format
than the default one.
Fix this by setting up the default output format for 'git diff'.
Reported-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Unlike other parts of the --pretty user-format expansion,
this function is not actually writing to the output, but
instead just storing the padding values into a context
struct. We don't need to be passed a strbuf at all.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
