According to the message of commit 0fe7c1de16,
"git diff" with three or more trees expects the merged tree first followed by
the parents, in order. However, this command reversed the order of its
arguments, resulting in confusing diffs. A comment /* Again, the revs are all
reverse */ suggested there was a reason for this, but I can't figure out the
reason, so I removed the reversal of the arguments. Test case included.
Signed-off-by: Matt McCutchen <matt@mattmccutchen.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Many call sites use strbuf_init(&foo, 0) to initialize local
strbuf variable "foo" which has not been accessed since its
declaration. These can be replaced with a static initialization
using the STRBUF_INIT macro which is just as readable, saves a
function call, and takes up fewer lines.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
If verification of path failed, it is always better to print an
error message saying this than relying on the caller function to
print a meaningful error message (especially when the callee already
prints error message for another situation).
Because the callers of add_index_entry_with_check() did not print
any error message, it resulted that the user would not notice the
problem when checkout of an invalid path failed.
Signed-off-by: Dmitry Potapov <dpotapov@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
The "rebase and edit" howto predates the much easier solution 'git
rebase -i' by two years.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Since dbf5e1e9, the '--no-validate' option is a Getopt::Long boolean
option. The '--no-' prefix (as in --no-validate) for boolean options
is not supported in Getopt::Long version 2.32 which was released with
Perl 5.8.0. This version only supports '--no' as in '--novalidate'.
More recent versions of Getopt::Long, such as version 2.34, support
either prefix. So use the older form in the tests.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
* maint:
rebase -i: do not fail when there is no commit to cherry-pick
test-lib: fix color reset in say_color()
fix pread()'s short read in index-pack
Conflicts:
csum-file.c
In case there is no commit to apply (for example because you rebase to
upstream and all your local patches have been applied there), do not
fail. The non-interactive rebase already behaves that way.
Do this by introducing a new command, "noop", which is substituted for
an empty commit list, so that deleting the commit list can still abort
as before.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
When executing a single test with colors enabled, the cursor was not set
back to the previous one, and you had to hit an extra enter to get it
back.
Work around this problem by calling 'tput sgr0' before printing the
final newline.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Since v1.6.0.2~13^2~ the completion of a thin pack uses sha1write() for
its ability to compute a SHA1 on the written data. This also provides
data buffering which, along with commit 92392b4a45, will confuse pread()
whenever an appended object is 1) freed due to memory pressure because
of the depth-first delta processing, and 2) needed again because it has
many delta children, and 3) its data is still buffered by sha1write().
Let's fix the issue by simply forcing cached data out when such an
object is written so it can be pread()'d at leisure.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
* pb/gitweb:
gitweb: Support for simple project search form
gitweb: Make the by_tag filter delve in forks as well
gitweb: Support for tag clouds
gitweb: Add support for extending the action bar with custom links
gitweb: Sort the list of forks on the summary page by age
gitweb: Clean-up sorting of project list
* mw/sendemail:
bash completion: Add --[no-]validate to "git send-email"
send-email: signedoffcc -> signedoffbycc, but handle both
Docs: send-email: Create logical groupings for man text
Docs: send-email: Create logical groupings for --help text
Docs: send-email: Remove unnecessary config variable description
Docs: send-email: --chain_reply_to -> --[no-]chain-reply-to
send-email: change --no-validate to boolean --[no-]validate
Docs: send-email: Man page option ordering
Docs: send-email usage text much sexier
Docs: send-email's usage text and man page mention same options
* maint:
builtin-apply: fix typo leading to stack corruption
git-stash.sh: fix flawed fix of invalid ref handling (commit da65e7c1)
builtin-merge.c: allocate correct amount of memory
Makefile: do not set NEEDS_LIBICONV for Solaris 8
rebase -i: remove leftover debugging
rebase -i: proper prepare-commit-msg hook argument when squashing
This typo led to stack corruption for lines with whitespace fixes
and length > 1024.
Signed-off-by: Imre Deak <imre.deak@gmail.com>
Looks-good-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
The referenced commit tried to fix a flaw in stash's handling of a user
supplied invalid ref. i.e. 'git stash apply fake_ref@{0}' should fail
instead of applying stash@{0}. But, it did so in a naive way by avoiding the
use of the --default option of rev-parse, and instead manually supplied the
default revision if the user supplied an empty command line. This prevented
a common usage scenario of supplying flags on the stash command line (i.e.
non-empty command line) which would be parsed by lower level git commands,
without supplying a specific revision. This should fall back to the default
revision, but now it causes an error. e.g. 'git stash show -p'
The correct fix is to use the --verify option of rev-parse, which fails
properly if an invalid ref is supplied, and still allows falling back to a
default ref when one is not supplied.
Convert stash-drop to use --verify while we're at it, since specifying
multiple revisions for any of these commands is also an error and --verify
makes it so.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
This patch just removes an unnecessary goto which makes the code easier
to read and shorter.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Fix two memory allocation errors which allocate space for a pointer
rather than enough space for the structure itself.
This:
struct commit_list *parent = xmalloc(sizeof(struct commit_list *));
should have been this:
struct commit_list *parent = xmalloc(sizeof(struct commit_list));
But while we're at it, change the allocation to reference the
variable it is allocating memory for to try to prevent a similar
mistake, for example if the type is changed, in the future.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Acked-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
* maint:
Do not use errno when pread() returns 0
git init: --bare/--shared overrides system/global config
git-push.txt: Describe --repo option in more detail
git rm: refresh index before up-to-date check
Fix a few typos in relnotes
If we use pread() while at the end of the file, it will return 0, which is
not an error from the operating system point of view. In this case, errno
has not been set and must not be used.
Signed-off-by: Samuel Tardieu <sam@rfc1149.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Many call sites immediately initialize allocated memory with zero after
calling xmalloc. A single call to xcalloc can replace this two-call
sequence.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
If core.bare or core.sharedRepository are set in /etc/gitconfig or
~/.gitconfig, then 'git init' will read the values when constructing a
new config file; reading them, however, will override the values
specified on the command line. In the case of --bare, this ends up
causing a segfault, without the repository being properly initialised;
in the case of --shared, the permissions are set according to the
existing config settings, not what was specified on the command line.
This fix saves any specified values for --bare and --shared prior to
reading existing config settings, and restores them after reading but
before writing the new config file. core.bare is ignored in all
situations, while core.sharedRepository will only be used if --shared
is not specified to git init.
Also includes testcases which use a specified global config file
override, demonstrating the former failure scenario.
Signed-off-by: Deskin Miller <deskinm@umich.edu>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
The --repo option was described in a way that the reader would have to
assume that it is the same as the <repository> parameter. But it actually
servers a purpose, which is now written down.
Furthermore, the --mirror option was missing from the synopsis.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Since "git rm" is supposed to be porcelain, we should convince it to
be user friendly by refreshing the index itself.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Add support for recognition of Objective-C class & instance methods,
C functions, and class implementation/interfaces.
Signed-off-by: Jonathan del Strother <jon.delStrother@bestbefore.tv>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
[ew: fixed a warning to stderr causing t9108 to fail]
Signed-off-by: Florian Ragwitz <rafl@debian.org>
Signed-off-by: Deskin Miller <deskinm@umich.edu>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
* maint:
Update release notes for 1.6.0.3
Teach rebase -i to honor pre-rebase hook
docs: describe pre-rebase hook
do not segfault if make_cache_entry failed
make prefix_path() never return NULL
fix bogus "diff --git" header from "diff --no-index"
Fix fetch/clone --quiet when stdout is connected
builtin-blame: Fix blame -C -C with submodules.
bash: remove fetch, push, pull dashed form leftovers
Conflicts:
diff.c
The original git-rebase honored pre-rebase hook so that public branches
can be protected from getting rebased, but rebase --interactive ignored
the hook entirely. This fixes it.
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Documentation/git-rebase.txt talks about pre-rebase hook, but it
appears that Documentation/git-hooks.txt does not have corresponding
entry for it.
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
There are 9 places where prefix_path is called, and only in one of
them the returned pointer was checked to be non-zero and only to
call exit(128) as it is usually done by die(). In other 8 places,
the returned value was not checked and it caused SIGSEGV when a
path outside of the working tree was used. For instance, running
git update-index --add /some/path/outside
caused SIGSEGV.
This patch changes prefix_path() to die if the path is outside of
the repository, so it never returns NULL.
Signed-off-by: Dmitry Potapov <dpotapov@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
When "git diff --no-index" is given an absolute pathname, it
would generate a diff header with the absolute path
prepended by the prefix, like:
diff --git a/dev/null b/foo
Not only is this nonsensical, and not only does it violate
the description of diffs given in git-diff(1), but it would
produce broken binary diffs. Unlike text diffs, the binary
diffs don't contain the filenames anywhere else, and so "git
apply" relies on this header to figure out the filename.
This patch just refuses to use an invalid name for anything
visible in the diff.
Now, this fixes the "git diff --no-index --binary a
/dev/null" kind of case (and we'll end up using "a" as the
basename), but some other insane cases are impossible to
handle. If you do
git diff --no-index --binary a /bin/echo
you'll still get a patch like
diff --git a/a b/bin/echo
old mode 100644
new mode 100755
index ...
and "git apply" will refuse to apply it for a couple of
reasons, and the diff is simply bogus.
And that, btw, is no longer a bug, I think. It's impossible
to know whethe the user meant for the patch to be a rename
or not. And as such, refusing to apply it because you don't
know what name you should use is probably _exactly_ the
right thing to do!
Original problem reported by Imre Deak. Test script and problem
description by Jeff King.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Fixes the `git clone --quiet` issue raised by Dave Jones in
http://marc.info/?l=git&m=121529226023180&w=2
With this simple patch applied we no longer see the following remote
messages as no-progress is correctly sent to the remote site:
remote: Counting objects: 84102, done.
remote: Compressing objects: 100% (24720/24720), done.
remote: Total 84102 (delta 60949), reused 80810 (delta 57900)
Signed-off-by: Tuncer Ayaz <tuncer.ayaz@gmail.com>
Acked-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
When performing copy detection, git-blame tries to
read gitlinks as blobs, which causes it to die.
This patch adds a check to skip them.
Signed-off-by: Alexander Gavrilov <angavrilov@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
We don't provide complation for git-commands in dashed form anymore,
so there is no need to keep those cases.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Tested-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
In case a file is touched but has no real changes then we just have to
update the index and should not error out.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
This breaks my build on Solaris 8, as there is no separate
libiconv.
The history of this line is somewhat convoluted. In 2fd955c
(in November 2005), NEEDS_LIBICONV was turned on for all
Solaris builds, claiming to "fix an error in Solaris 10 by
setting NEEDS_LIBICONV".
Later, e15f545 (in February of 2006) claimed that "Solaris
9+ don't need iconv", and moved NEEDS_LIBICONV into a
section for Solaris 8.
Furthermore, Brandon Casey claims in
<5A1KxlhmUIHe8iXPxnXYuNXsq0Yjlbwkz2eBin3z7ELuL9nK-4tSpw@cipher.nrlssc.navy.mil>
that he does not set NEEDS_LIBICONV for Solaris 7.
So either one of those commits is totally wrong, or there is
some other magic going on where some Solaris installs need
it and others don't.
Given Brandon's statement and my problems on Solaris 8 with
NEEDS_LIBICONV, I am inclined to think the first commit was
bogus, and that NEEDS_LIBICONV shouldn't be set for Solaris
at all by default. If somebody wants to use iconv and has
installed it manually, they can set it in their config.mak.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
