More typo fixes from Santi Béjar, plus a couple other mistakes I noticed
along the way.
Cc: Santi Béjar <sbejar@gmail.com>
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Signed-off-by: Junio C Hamano <junkio@cox.net>
- git-ls-files.txt: typo in description of --ignored
- git-clean.txt: s/forceRequire/requireForce/
Signed-off-by: Michael Spang <mspang@uwaterloo.ca>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* maint:
Documentation: don't reference non-existent 'git-cvsapplycommit'
user-manual: stop deprecating the manual
user-manual: miscellaneous editing
user-manual: fix .gitconfig editing examples
user-manual: clean up fast-forward and dangling-objects sections
user-manual: add section ID's
user-manual: more discussion of detached heads, fix typos
git-gui: Allow spaces in path to 'wish'
gitk: Allow user to choose whether to see the diff, old file, or new file
This command was implemented, but not documented in
dfdac5d9b8.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <junkio@cox.net>
It's just as much a work-in-progress, but at least now it's gotten
enough technical review to shake out most of the really bad lies, so
hopefully it doesn't do any actual damage. And if we encourage people
to read it, they'll be more likely to whine about it, which will help
get it fixed faster.
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
I cherry-picked some additional miscellaneous fixes from those suggested
by Santi Béjar, including fixes to:
- correct discussion of repository/HEAD->repository shortcut
- add mention of git-mergetool
- add mention of --track
- mention "-f" as well as "+" for fetch
Cc: Santi Béjar <sbejar@gmail.com>
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Santi Béjar points out that when telling people how to "introduce
themselves" to git we're advising them to replace their entire
.gitconfig file. Fix that.
Cc: "Santi Béjar <sbejar@gmail.com>
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
The previous commit calls attention to the fact that we have two
sections each devoted to fast-forwards and to dangling objects. Revise
and attempt to differentiate them a bit. Some more reorganization may
be required later....
Signed-off-by: J. Bruce Fields
Any section lacking an id gets an annoying warning when you build
the manual. More seriously, the table of contents then generates
volatile id's which change with every build, with the effect that
we get URL's that change all the time.
The ID's are manually generated and sometimes inconsistent, but
that's OK.
XXX: what to do about the preface?
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Nicolas Pitre pointed out a couple typos and some room for improvement
in the discussion of detached heads.
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Cc: Nicolas Pitre <nico@cam.org>
* maint:
Small correction in reading of commit headers
Documentation: fix typo in git-remote.txt
Add test for blame corner cases.
blame: -C -C -C
blame: Notice a wholesale incorporation of an existing file.
Fix --boundary output
diff format documentation: describe raw combined diff format
Mention version 1.5.1 in tutorial and user-manual
Add --no-rebase option to git-svn dcommit
Fix markup in git-svn man page
Add description of raw combined diff format to diff-formats.txt,
as "diff format for merges" section, before "Generating patches..."
section.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Most other documentation will frequently be read from an installation
of git so will naturally be associated with the installed version.
But these two documents in particular are often read from web pages
while users are still exploring git. It's important to mention
version 1.5.1 since these documents provide example commands that
won't work with previous versions of git.
Signed-off-by: Junio C Hamano <junkio@cox.net>
git-svn dcommit exports commits to Subversion, then imports them back
to git again, and last but not least rebases or resets HEAD to the
last of the new commits. I guess this rebasing is convenient when
using just git, but when the commits to be exported are managed by
StGIT, it's really annoying. So add an option to disable this
behavior. And document it, too!
Signed-off-by: Karl Hasselström <kha@treskal.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Some of the existing markup was just plain broken, and some subcommand
options weren't indented properly.
Signed-off-by: Karl Hasselström <kha@treskal.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
When the -v is passed, git-tag will exit after it is processed like it
does with the -d and -l options. Additionally, missing code block caused
wrong rendering of an option example.
Signed-off-by: Jonas Fonseca <fonseca@diku.dk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* maint:
gitweb: use decode_utf8 directly
posix compatibility for t4200
Document 'opendiff' value in config.txt and git-mergetool.txt
Allow PERL_PATH="/usr/bin/env perl"
Make xstrndup common
diff.c: fix "size cache" handling.
http-fetch: Disable use of curl multi support for libcurl < 7.16.
It can be either hostname/address, or a full path to a
local executable.
Signed-off-by: Jari Aalto <jari.aalto@cante.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Separate things to be checked when making commits, and things
to be checked when sending patches.
Signed-off-by: Jari Aalto <jari.aalto@cante.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This patch adds a new 'find-rev' command to git-svn that lets you easily
translate between SVN revision numbers and git tree-ish.
Signed-off-by: Adam Roben <aroben@apple.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
With this "git blame -b -s HEAD~n..HEAD" becomes a nicer way to
review the result of recent changes in context.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Some other programs get the user's email address from $EMAIL, so fall back to
that if we don't have a Git-specific email address.
Signed-off-by: Josh Triplett <josh@freedesktop.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* maint:
http.c: Fix problem with repeated calls of http_init
Add missing reference to GIT_COMMITTER_DATE in git-commit-tree documentation
Fix import-tars fix.
Update .mailmap with "Michael"
Do not barf on too long action description
Catch empty pathnames in trees during fsck
Don't allow empty pathnames in fast-import
import-tars: be nice to wrong directory modes
git-svn: Added 'find-rev' command
git shortlog documentation: add long options and fix a typo
This patch adds a new 'find-rev' command to git-svn that lets you easily
translate between SVN revision numbers and git tree-ish.
Signed-off-by: Adam Roben <aroben@apple.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Documentation/git-http-fetch.txt: --recover to resume a failed fetch
operation.
Signed-off-by: Andrew Ruder <andy@aeruder.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Documentation/git-local-fetch.txt: -s to use
symbolic links instead of file-to-file copy, -l
to use hardlinks, -n to never use file-to-file
copies, --recover to resume a failed fetch.
Signed-off-by: Andrew Ruder <andy@aeruder.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Documentation/git-http-push.txt: Changing --complete to --all. Added
documentation for -d and -D to remote remote refs.
Signed-off-by: Andrew Ruder <andy@aeruder.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Documenting alternate ways to use -L:
-L /regex/,end
-L start,+offset
Signed-off-by: Andrew Ruder <andy@aeruder.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Documentation/git-grep.txt: Document -F/--fixed-strings to
search for non-regexp patterns. Document -I to not search
binary files. Document -<num> as a shortcut for -C<num>.
Signed-off-by: Andrew Ruder <andy@aeruder.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Documentation/git-fmt-merge-msg.txt:
--summary to list commit summaries on merge
--no-summary
--file to take merged objects from a file.
Configuration option merge.summary
Signed-off-by: Andrew Ruder <andy@aeruder.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Document --quiet/-q and --verbose/-v
Add -n as an alternate for --no-tags
Fix some whitespace issues
Signed-off-by: Andrew Ruder <andy@aeruder.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
-n is not a short form of --no-index as the documentation
suggests. Removing it from the documentation and command
usage string.
Signed-off-by: Andrew Ruder <andy@aeruder.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* maint:
Start preparing for 1.5.1.3
Sanitize @to recipients.
git-svn: Ignore usernames in URLs in find_by_url
Document --dry-run and envelope-sender for git-send-email.
Allow users to optionally specify their envelope sender.
Ensure clean addresses are always used with Net::SMTP
Validate @recipients before using it for sendmail and Net::SMTP.
Perform correct quoting of recipient names.
Change the scope of the $cc variable as it is not needed outside of send_message.
Debugging cleanup improvements
Prefix Dry- to the message status to denote dry-runs.
Document --dry-run parameter to send-email.
git-svn: Don't rely on $_ after making a function call
Fix handle leak in write_tree
Actually handle some-low memory conditions
Conflicts:
RelNotes
git-send-email.perl
This adds --date={local,relative,default} option to log family of commands,
to allow displaying timestamps in user's local timezone, relative time, or
the default format.
Existing --relative-date option is a synonym of --date=relative; we could
probably deprecate it in the long run.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Catch the documentation up with the rest of this patchset.
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
- Do not break the line when it's not needed
- s/Your/You
Signed-off-by: Luiz Fernando N. Capitulino <lcapitulino@mandriva.com.br>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The interface is similar to the custom low-level merge drivers.
First you configure your filter driver by defining 'filter.<name>.*'
variables in the configuration.
filter.<name>.clean filter command to run upon checkin
filter.<name>.smudge filter command to run upon checkout
Then you assign filter attribute to each path, whose name
matches the custom filter driver's name.
Example:
(in .gitattributes)
*.c filter=indent
(in config)
[filter "indent"]
clean = indent
smudge = cat
Signed-off-by: Junio C Hamano <junkio@cox.net>
The 'ident' attribute set to path squashes "$ident:<any bytes
except dollor sign>$" to "$ident$" upon checkin, and expands it
to "$ident: <blob SHA-1> $" upon checkout.
As we have two conversions that affect checkin/checkout paths,
clarify how they interact with each other.
Signed-off-by: Junio C Hamano <junkio@cox.net>
* maint:
Documentation/git-reset.txt: suggest git commit --amend in example.
Build RPM with ETC_GITCONFIG=/etc/gitconfig
Ignore all man sections as they are generated files.
Fix typo in git-am: s/Was is/Was it/
Reverse the order of -b and --track in the man page.
dir.c(common_prefix): Fix two bugs
Conflicts:
git.spec.in
Add a new configuration option clean.requireForce. If set, git-clean will
refuse to run, unless forced with the new -f option, or not acting due to -n.
Signed-off-by: Josh Triplett <josh@freedesktop.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Using "-b --track newbranch oldbranch" gives the error:
git checkout: updating paths is incompatible with switching
branches/forcing
However, "--track -b ..." works just fine.
Signed-off-by: Brian Gernhardt <benji@silverinsanity.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* 'jc/attr': (28 commits)
lockfile: record the primary process.
convert.c: restructure the attribute checking part.
Fix bogus linked-list management for user defined merge drivers.
Simplify calling of CR/LF conversion routines
Document gitattributes(5)
Update 'crlf' attribute semantics.
Documentation: support manual section (5) - file formats.
Simplify code to find recursive merge driver.
Counto-fix in merge-recursive
Fix funny types used in attribute value representation
Allow low-level driver to specify different behaviour during internal merge.
Custom low-level merge driver: change the configuration scheme.
Allow the default low-level merge driver to be configured.
Custom low-level merge driver support.
Add a demonstration/test of customized merge.
Allow specifying specialized merge-backend per path.
merge-recursive: separate out xdl_merge() interface.
Allow more than true/false to attributes.
Document git-check-attr
Change attribute negation marker from '!' to '-'.
...
* np/pack: (27 commits)
document --index-version for index-pack and pack-objects
pack-objects: remove obsolete comments
pack-objects: better check_object() performances
add get_size_from_delta()
pack-objects: make in_pack_header_size a variable of its own
pack-objects: get rid of create_final_object_list()
pack-objects: get rid of reuse_cached_pack
pack-objects: clean up list sorting
pack-objects: rework check_delta_limit usage
pack-objects: equal objects in size should delta against newer objects
pack-objects: optimize preferred base handling a bit
clean up add_object_entry()
tests for various pack index features
use test-genrandom in tests instead of /dev/urandom
simple random data generator for tests
validate reused pack data with CRC when possible
allow forcing index v2 and 64-bit offset treshold
pack-redundant.c: learn about index v2
show-index.c: learn about index v2
sha1_file.c: learn about index version 2
...
* maint:
GIT 1.5.1.2
perl: install private Error.pm if the site version is older than our own
git-clone: fix dumb protocol transport to clone from pack-pruned ref
Documentation/git-config.txt: Added documentation for --system
Documentation/builtin-config.c: Added --system to the short usage
Signed-off-by: Andrew Ruder <andy@aeruder.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
In asciidoc 7.1.2 and prior there is no obvious way to get:
'add'ing
to emphasize only the "add", instead it treats the first apostrophe as the
beginning of an emphasis, and the second apostrophe as a regular
apostrophe and makes the rest of the line an emphasis since there is no
closing apostrophe. In the newer asciidoc you can do it pretty easily
with __add__ing but I'm not sure it would be best to make that a prereq
for something as silly as this.
Signed-off-by: Andrew Ruder <andy@aeruder.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Documentation/git-cherry-pick.txt: Remove --replay as it is not
handled by the code (-r is however).
Signed-off-by: Andrew Ruder <andy@aeruder.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Documentation/git-archive.txt: Document -v/--verbose option.
Add -l as short form of --list.
Signed-off-by: Andrew Ruder <andy@aeruder.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* maint:
git-shortlog: Fix two formatting errors in asciidoc documentation
Fix overwriting of files when applying contextually independent diffs
git-svn: don't allow globs to match regular files
First use [verse] in the SYNOPSIS so that the line break actually
shows.
Secondly drop the quotes around '.mailmap' since this exposes
a bug in our toolchain (didn't bother enough yet to find out wether
it is asciidoc's fault or that of the XSL templates) that leads to
the dot not getting escaped correctly in the roff output and thereby
swallowing the line.
Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
git only tracks the histories of full directories, not
that of individual files. Sometimes, SVN users will
place[1] a regular file in the directory designated
for subdirectories of branches or tags.
Thanks to jrockway on #git for pointing this out.
[1] mistakenly or otherwise, such as a README
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* fl/cvsserver:
config.txt: Add gitcvs.db* variables
cvsserver: Document the GIT branches -> CVS modules mapping more prominently
cvsserver: Reword documentation on necessity of write access
cvsserver: Allow to "add" a removed file
cvsserver: Add asciidoc documentation for new database backend configuration
cvsserver: Corrections to the database backend configuration
cvsserver: Use DBI->table_info instead of DBI->tables
cvsserver: Abort if connect to database fails
cvsserver: Make the database backend configurable
cvsserver: Allow to override the configuration per access method
cvsserver: Handle three part keys in git config correctly
cvsserver: Introduce new state variable 'method'
Conflicts:
Documentation/config.txt
* maint:
Start preparing for 1.5.1.2
git-svn: quiet some warnings when run only with --version/--help
git-svn: respect lower bound of -r/--revision when following parent
Conflicts:
RelNotes
* maint:
Have sample update hook not refuse deleting a branch through push.
variable $projectdesc needs to be set before checking against unchanged default.
Update git-annotate/git-blame documentation
Update git-apply documentation
Update git-applymbox documentation
Update git-am documentation
user-manual: use detached head when rewriting history
user-manual: start revising "internals" chapter
user-manual: detached HEAD
user-manual: fix discussion of default clone
Documentation: clarify track/no-track option.
Documentation: clarify git-checkout -f, minor editing
Documentation: minor edits of git-lost-found manpage
Moved options that pertained to both git-blame and git-annotate to a
common file blame-options.txt.
builtin-blame.c: Removed --compatibility, --long, --time from the
short usage as they are not handled in the code.
Documentation/git-blame.txt: Removed common options to git-annotate.
Added documentation for --score-debug. Removed --compatibility.
Adjusted usage at top to not wrap on 80 columns.
Documentation/git-annotate.txt: Using common options blame-options.txt.
Documentation/blame-options.txt: Added -b note about associated config
option, added --root note about associated config option, added
documentation for --show-stats. Removed --long, --time, --rev-file as
those options do not really exist. Added documentation for -M/-C taking
an optional score argument for detection of moved lines.
Signed-off-by: Andrew Ruder <andy@aeruder.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Document -v (short form of --verbose). Redo usage
to not wrap on 80 column terminal with typical
settings.
Signed-off-by: Andrew Ruder <andy@aeruder.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Documentation/git-applymbox.txt: updating -u documentation to include
fact that it encodes to the i18n.commitencoding setting, not just utf-8.
Added documentation of -n option to pass -n to git-mailinfo.
Signed-off-by: Andrew Ruder <andy@aeruder.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Documentation/git-am.txt missing several short versions
of options. Added documentation for --resolvemsg=<msg>
command-line option.
Signed-off-by: Andrew Ruder <andy@aeruder.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is slightly simpler if we use a detached head. And it's probably
good to have another example that uses this feature.
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Add a brief mention of detached HEADs and .git/HEAD.
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The name "master" isn't actually quite so special. Also, fix some bad
grammar.
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Fix the description of the --no-track option so it no longer says the
opposite of what was intended. Also mention branch.autosetupmerge
explicitly.
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Signed-off-by: Junio C Hamano <junkio@cox.net>
"Force a re-read of everything" doesn't mean much to me.
Also some minor grammar fixes.
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Minor improvements to grammar and clarity of lost-found manpage.
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Documentation/SubmittingPatches: Add note that all user interface changes
should include associated documentation updates.
Signed-off-by: Andrew Ruder <andy@aeruder.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* maint:
Document -g (--walk-reflogs) option of git-log
sscanf/strtoul: parse integers robustly
git-blame: Fix overrun in fake_working_tree_commit()
[PATCH] Improve look-and-feel of the gitk tool.
[PATCH] Teach gitk to use the user-defined UI font everywhere.
* maint:
git-quiltimport complaining yet still working
config.txt: Fix grammatical error in description of http.noEPSV
config.txt: Change pserver to server in description of gitcvs.*
config.txt: Document core.autocrlf
config.txt: Document gitcvs.allbinary
Do not default to --no-index when given two directories.
Use rev-list --reverse in git-rebase.sh
Adds documentation for gitcvs.{dbname,dbdriver,dbuser,dbpass}
Texts are mostly taken from git-cvsserver.txt whith some
adaptions so that they make more sense out of the context
of the original man page.
Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
These variables apply to the SSH access as well, so don't use
pserver here which might confuse users.
Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Text shamelessly stolen from the 1.5.1 release notes.
Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Add a note about the branches -> modules mapping to LIMITATIONS because
I really think it should be noted there and not just at the end of
the installation step-by-step HOWTO.
I used "git branches" there and changed "heads" to "branches" in
my section about database configuration. I'm reluctant to replace
all occourences of "head" with "branch" though because you always
have to say "git branch" because CVS also has the concept of
branches. You can say "head" though, because there is no such
concept in CVS. In all the existing occourences of head other than
the one I changed I think "head" flows better in the text.
Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Reworded the section about git-cvsserver needing to update the
database.
Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
When used with '--boundary A...B', this shows the -/</> marker
you would get with --left-right option to 'git-log' family.
When symmetric diff is not used, everybody is shown to be on the
"right" branch.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Add a new option to git-format-patch, entitled --subject-prefix that allows
control of the subject prefix '[PATCH]'. Using this option, the text 'PATCH' is
replaced with whatever input is provided to the option. This allows easily
generating patches like '[PATCH 2.6.21-rc3]' or properly numbered series like
'[-mm3 PATCH N/M]'. This patch provides the implementation and documentation.
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* maint:
GIT 1.5.1.1
cvsserver: Fix handling of diappeared files on update
fsck: do not complain on detached HEAD.
(encode_85, decode_85): Mark source buffer pointer as "const".
Use the comment in the code to document the --exclude-existing
function to git-show-ref.
Signed-off-by: Julian Phillips <julian@quantumfyre.co.uk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
As noted by Junio, --format=tar should be assumed if no format
was specified.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* maint:
Add Documentation/cmd-list.made to .gitignore
git-svn: fix log command to avoid infinite loop on long commit messages
git-svn: dcommit/rebase confused by patches with git-svn-id: lines
git-svn: bail out on incorrect command-line options
Documents the new configuration variables and the variable
substitution mechanism.
Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Fix a typo: s/Not/Note/
Some formating fixes: Use ` ` syntax for all filenames and
' ' syntax for all commandline switches.
Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* jc/index-output:
git-read-tree --index-output=<file>
_GIT_INDEX_OUTPUT: allow plumbing to output to an alternative index file.
Conflicts:
builtin-apply.c
* cc/bisect:
git-bisect: allow bisecting with only one bad commit.
t6030: add a bit more tests to git-bisect
git-bisect: modernization
Documentation: bisect: "start" accepts one bad and many good commits
Bisect: teach "bisect start" to optionally use one bad and many good revs.
* maint:
Documentation: tighten dependency for git.{html,txt}
Makefile: iconv() on Darwin has the old interface
t5300-pack-object.sh: portability issue using /usr/bin/stat
t3200-branch.sh: small language nit
usermanual.txt: some capitalization nits
Make builtin-branch.c handle the git config file
rename_ref(): only print a warning when config-file update fails
Distinguish branches by more than case in tests.
Avoid composing too long "References" header.
cvsimport: Improve formating consistency
cvsimport: Reorder options in documentation for better understanding
cvsimport: Improve usage error reporting
cvsimport: Improve documentation of CVSROOT and CVS module determination
cvsimport: sync usage lines with existing options
Conflicts:
Documentation/Makefile
Every time _any_ documentation page changed, cmds-*.txt files
were regenerated, which caused git.{html,txt} to be remade. Try
not to update cmds-*.txt files if their new contents match the
old ones.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Use ' ' syntax for all commandline options mentioned in text.
Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The current order the options are documented in makes no sense
at all to me. Reorder them so that similar options are grouped
together and also order them somehwhat by importance.
Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Document the fact that git-cvsimport tries to find out CVSROOT from
CVS/Root and $ENV{CVSROOT} and CVS_module from CVS/Repository.
Also use ` ` syntax for all filenames for consistency.
Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Sync both the usage lines in the code and the asciidoc
documentation with the real list of options. While
all options seems to be documented in the asciidoc
document, not all of them were listed in the usage line.
Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* maint:
Fix lseek(2) calls with args 2 and 3 swapped
Honor -p<n> when applying git diffs
Fix dependency of common-cmds.h
Fix renaming branch without config file
DESTDIR support for git/contrib/emacs
gitweb: Fix bug in "blobdiff" view for split (e.g. file to symlink) patches
Document --left-right option to rev-list.
Revert "builtin-archive: use RUN_SETUP"
rename contrib/hooks/post-receieve-email to contrib/hooks/post-receive-email.
rerere: make sorting really stable.
Fix t4200-rerere for white-space from "wc -l"
Prior to 1.5.0 the git-lost-found utility was useful to locate
commits that were not referenced by any ref. These were often
amends, or resets, or tips of branches that had been deleted.
Being able to locate a 'lost' commit and recover it by creating a
new branch was a useful feature in those days.
Unfortunately 1.5.0 added the reflogs to the reachability analysis
performed by git-fsck, which means that most commits users would
consider to be lost are still reachable through a reflog. So most
(or all!) commits are reachable, and nothing gets output from
git-lost-found.
Now git-fsck can be told to ignore reflogs during its reachability
analysis, making git-lost-found useful again to locate commits
that are no longer referenced by a ref itself, but may still be
referenced by a reflog.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* jc/bisect:
make the previous optimization work also on path-limited rev-list --bisect
rev-list --bisect: Fix "halfway" optimization.
t6004: add a bit more path optimization test.
git-rev-list --bisect: optimization
git-rev-list: add --bisect-vars option.
t6002: minor spelling fix.
* fl/doc:
Documentation: unbreak user-manual.
Documentation: Add version information to man pages
Documentation: Replace @@GIT_VERSION@@ in documentation
This corrects the interface mistake of the previous one, and
gives a command line parameter to the only plumbing command that
currently needs it: "git-read-tree".
We can add the calls to set_alternate_index_output() to other
plumbing commands that update the index if/when needed.
Signed-off-by: Junio C Hamano <junkio@cox.net>
When defined, this allows plumbing commands that update the
index (add, apply, checkout-index, merge-recursive, mv,
read-tree, rm, update-index, and write-tree) to write their
resulting index to an alternative index file while holding a
lock to the original index file. With this, git-commit that
jumps the index does not have to make an extra copy of the index
file, and more importantly, it can do the update while holding
the lock on the index.
However, I think the interface to let an environment variable
specify the output is a mistake, as shown in the documentation.
If a curious user has the environment variable set to something
other than the file GIT_INDEX_FILE points at, almost everything
will break. This should instead be a command line parameter to
tell these plumbing commands to write the result in the named
file, to prevent stupid mistakes.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Not that this release really matters, as we will be doing
1.5.1 tomorrow. This commit is to tie the loose ends and
merge all of "maint" branch into "master" in preparation.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Mainly consistent usage of "git command" and not "git-command" syntax
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Acked-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The git-cvsserver documentation claims that the server will set
-k modes if appropriate which is not really the case. On the other
hand the available gitcvs.allbinary variable is not documented at
all. Fix both these issues by rewording the related paragraph.
Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* maint:
git-upload-pack: make sure we close unused pipe ends
Documentation/git-rev-parse.txt: fix example in SPECIFYING RANGES.
Documentation/git-svnimport.txt: fix typo.
* 'master' of git://repo.or.cz/git/mergetool.git:
mergetool: Clean up description of files and prompts for merge resolutions
mergetool: Make git-rm quiet when resolving a deleted file conflict
mergetool: Add support for Apple Mac OS X's opendiff command
mergetool: Fix abort command when resolving symlinks and deleted files
mergetool: Remove spurious error message if merge.tool config option not set
mergetool: factor out common code
mergetool: portability fix: don't use reserved word function
mergetool: portability fix: don't assume true is in /bin
mergetool: Don't error out in the merge case where the local file is deleted
mergetool: Replace use of "echo -n" with printf(1) to be more portable
Fix minor formatting issue in man page for git-mergetool
Please see http://bugs.debian.org/404795:
In git-rev-parse(1), there is an example commit tree, which is used twice.
The explanation for this tree is very clear: B and C are commit *parents* to
A.
However, when the tree is reused as an example in the SPECIFYING RANGES, the
manpage author screws up and uses A as a commit *parent* to B and C! I.e.,
he inverts the tree.
And the fact that for this example you need to read the tree backwards is
not explained anywhere (and it would be confusing even if it was).
Signed-off-by: Gerrit Pape <pape@smarden.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This was noticed by Frederik Schwarzer. SVN's repository by default has
trunk, tags/, and branch_es_/.
Signed-off-by: Gerrit Pape <pape@smarden.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The previous one broke generated xml files for anything but manpages,
as it took the header for manpage unconditionally. This fixes it.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Override the [header] macro of asciidoc's docbook
backend to add version information to the generated
man pages.
Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Include GIT-VERSION-FILE and replace @@GIT_VERSION@@ in
the HTML and XML asciidoc output. The documentation
doesn't depend on GIT-VERSION-FILE so it will not be
automatically rebuild if nothing else changed.
[jc: fixing the case for interrupted build]
Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* maint:
user-manual: introduce "branch" and "branch head" differently
glossary: clean up cross-references
glossary: stop generating automatically
user-manual: Use def_ instead of ref_ for glossary references.
user-manual.txt: fix a tiny typo.
user-manual: run xsltproc without --nonet option
* 'maint' of git://linux-nfs.org/~bfields/git:
user-manual: introduce "branch" and "branch head" differently
glossary: clean up cross-references
glossary: stop generating automatically
user-manual: Use def_ instead of ref_ for glossary references.
user-manual.txt: fix a tiny typo.
user-manual: run xsltproc without --nonet option
This idea was suggested by Bill Lear
(Message-ID: <17920.38942.364466.642979@lisa.zopyra.com>)
and I think it is a very good one.
This patch adds a new test file for "git bisect run", but there
is currently only one basic test.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This adds --bisect-vars option to rev-list. The output is suitable
for `eval` in shell and defines five variables:
- bisect_rev is the next revision to test.
- bisect_nr is the expected number of commits to test after
bisect_rev is tested.
- bisect_good is the expected number of commits to test
if bisect_rev turns out to be good.
- bisect_bad is the expected number of commits to test
if bisect_rev turns out to be bad.
- bisect_all is the number of commits we are bisecting right now.
The documentation text was partly stolen from Johannes
Schindelin's patch.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Allow to override the gitcvs.enabled and gitcvs.logfile configuration
variables for each access method (i.e. "ext" or "pserver") in the
form gitcvs.<method>.<var>
Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
There has not been any work on the shallow stuff lately, so it is hard
to find out what it does, and how. This document describes the ideas
as well as the current problems, and can serve as a starting point for
shallow people.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Setting up a git-daemon came up the other day on IRC, and it is slightly
non trivial for the uninitiated.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
I think we can start to slow down, as we now have covered
everything I listed earlier in the short-term release plan.
The last release 1.5.0 took painfully too long.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The new configuration variable core.deltaBaseCacheLimit allows the
user to control how much memory they are willing to give to Git for
caching base objects of deltas. This is not normally meant to be
a user tweakable knob; the "out of the box" settings are meant to
be suitable for almost all workloads.
We default to 16 MiB under the assumption that the cache is not
meant to consume all of the user's available memory, and that the
cache's main purpose was to cache trees, for faster path limiters
during revision traversal. Since trees tend to be relatively small
objects, this relatively small limit should still allow a large
number of objects.
On the other hand we don't want the cache to start storing 200
different versions of a 200 MiB blob, as this could easily blow
the entire address space of a 32 bit process.
We evict OBJ_BLOB from the cache first (credit goes to Junio) as
we want to favor OBJ_TREE within the cache. These are the objects
that have the highest inflate() startup penalty, as they tend to
be small and thus don't have that much of a chance to ammortize
that penalty over the entire data.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
In the Linux kernel, for example, it's common to include Cc: lines
for cases when you want to remember to cc someone on a patch without
necessarily claiming they signed off on it. Make git-send-email
aware of these.
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Signed-off-by: Junio C Hamano <junkio@cox.net>
I was using "branch" to mean "head", but that's perhaps a little
sloppy; so instead start by using the terms "branch head" and "head",
while still quickly falling back on "branch", since that's what
people actually say more frequently.
Also include glossary references on the first uses of "head" and "tag".
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
The sort_glossary.pl script sorts the glossary, checks for duplicates,
and automatically adds cross-references.
But it's not so hard to do all that by hand, and sometimes the automatic
cross-references are a little wrong; so let's run the script one last
time and check in its output.
Note: to make the output fit better into the user manual I also deleted
the acknowledgements at the end, which was maybe a little rude; feel
free to object and I can find a different solution.
Cc: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
I'd like to start using references to the glossary in the user manual.
The "ref_" prefix for these references seems a little generic; so
replace with "def_".
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
"file patch" was doubtless intended to be "file path",
but "directory name" is clearer.
Signed-off-by: Jim Meyering <jim@meyering.net>
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
The --nonet option prevents xsltproc from going to the network to find
anything. But it always tries to find them locally first, so for a
user with the necessary docbook stylesheets installed the build will
work just fine without xsltproc attempting to use the network; all
--nonet does is make it fail rather than falling back on that. That
doesn't seem particularly helpful.
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
* ar/diff:
Add tests for --quiet option of diff programs
try-to-simplify-commit: use diff-tree --quiet machinery.
revision.c: explain what tree_difference does
Teach --quiet to diff backends.
diff --quiet
Remove unused diffcore_std_no_resolve
Allow git-diff exit with codes similar to diff(1)
This patch adds support for a dummy remote '.' to avoid having
to declare a fake remote like
[remote "local"]
url = .
fetch = refs/heads/*:refs/heads/*
Such a builtin remote simplifies the operation of "git-fetch",
which will populate FETCH_HEAD but will not pretend that two
repositories are in use, will not create a thin pack, and will
not perform any useless remapping of names. The speed
improvement is around 20%, and it should improve more if
"git-fetch" is converted to a builtin.
To this end, git-parse-remote is grown with a new kind of
remote, 'builtin'. In git-fetch.sh, we treat the builtin remote
specially in that it needs no pack/store operations. In fact,
doing git-fetch on a builtin remote will simply populate
FETCH_HEAD appropriately.
The patch also improves of the --track/--no-track support,
extending it so that branch.<name>.remote items referring '.'
can be created. Finally, it fixes a typo in git-checkout.sh.
Signed-off-by: Paolo Bonzini <bonzini@gnu.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This introduces a new command-line option: --exit-code. The diff
programs will return 1 for differences, return 0 for equality, and
something else for errors.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Previous formulation could make it appear as removing all lines
matching a regexp (at least, I was looking for such a flag, and
confused this flag for what I was looking for).
Signed-off-by: Yann Dirson <ydirson@altern.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This avoids fetching new revisions remotely, and is usefuly
versus plain "git rebase" because the user does not have to
specify which remote head to rebase against.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Format some lists really as lists. Improves both html and man
output.
Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The git-mergetool program can be used to automatically run an appropriate
merge resolution program to resolve merge conflicts. It will automatically
run one of kdiff3, tkdiff, meld, xxdiff, or emacs emerge programs.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Chain-reply-to is a personal perference, and is unlikely to change from
patchset to patchset. Similarly, bcc is likely to have the same values
every invocation is one likes to bcc oneself.
So, allow both to be set via configuration variables.
Signed-off-by: Avi Kivity <avi@qumranet.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Wishing to implement an email aliases file, I found that they were already
implmented. Document them for the next user.
Signed-off-by: Avi Kivity <avi@qumranet.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Sergey Vlasov, Andy Parkins and Alex Riesen all pointed out that it
is possible for a single invocation of receive-pack to be given more
refs than the OS might allow us to pass as command line parameters
to a single hook invocation.
We don't want to break these up into multiple invocations (like
xargs might do) as that makes it impossible for the pre-receive
hook to verify multiple related ref updates occur at the same time,
and it makes it harder for post-receive to send out a single batch
notification.
Instead we pass the reference data on a pipe connected to the
hook's stdin, supplying one ref per line to the hook. This way a
single hook invocation can obtain an infinite amount of ref data,
without bumping into any operating system limits.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
In order to track and build on top of a branch 'topic' you track from
your upstream repository, you often would end up doing this sequence:
git checkout -b mytopic origin/topic
git config --add branch.mytopic.remote origin
git config --add branch.mytopic.merge refs/heads/topic
This would first fork your own 'mytopic' branch from the 'topic'
branch you track from the 'origin' repository; then it would set up two
configuration variables so that 'git pull' without parameters does the
right thing while you are on your own 'mytopic' branch.
This commit adds a --track option to git-branch, so that "git
branch --track mytopic origin/topic" performs the latter two actions
when creating your 'mytopic' branch.
If the configuration variable branch.autosetupmerge is set to true, you
do not have to pass the --track option explicitly; further patches in
this series allow setting the variable with a "git remote add" option.
The configuration variable is off by default, and there is a --no-track
option to countermand it even if the variable is set.
Signed-off-by: Paolo Bonzini <bonzini@gnu.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* maint:
git.el: Retrieve commit log information from .dotest directory.
git.el: Avoid appending a signoff line that is already present.
setup_git_directory_gently: fix off-by-one error
user-manual: install user manual stylesheet with other web documents
user-manual: fix rendering of history diagrams
user-manual: fix missing colon in git-show example
user-manual: fix inconsistent use of pull and merge
user-manual: fix inconsistent example
glossary: fix overoptimistic automatic linking of defined terms
Documentation: s/seperator/separator/
Adjust reflog filemode in shared repository
* 'maint' of git://linux-nfs.org/~bfields/git:
user-manual: install user manual stylesheet with other web documents
user-manual: fix rendering of history diagrams
user-manual: fix missing colon in git-show example
user-manual: fix inconsistent use of pull and merge
user-manual: fix inconsistent example
glossary: fix overoptimistic automatic linking of defined terms
Asciidoc appears to interpret a backslash at the end of a line as
escaping the end-of-line character, which screws up the display of
history diagrams like
o--o--o
\
o--...
The obvious fix (replacing "\" by "\\") doesn't work. The only
workaround I've found is to include all such diagrams in a LiteralBlock.
Asciidoc claims that should be equivalent to a literal paragraph, so I
don't understand why the difference--perhaps it's an asciidoc bug.
Cc: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
There should be a colon in this git-show example.
Cc: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
I used "git pull ." instead of "git merge" here without any explanation.
Stick instead to "git merge" for now (the equivalent pull syntax is
still covered in a later chapter).
Cc: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
The configuration file fragment here is inconsistent with the text
above. Thanks to Ramsay Jones for the correction.
Cc: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
The script sort_glossary.pl turns each use of "term" into a link to the
definition of "term". To avoid mangling links like
gitlink:git-term[1]
it doesn't replace any occurence of "term" preceded by "link:git-".
This fails for gitlink:git-symbolic-ref[1] when substituting for "ref".
So instead just refuse to replace anything preceded by a "-".
That could result in missing some opportunities, but that's a less
annoying error.
Actually I find the automatic substitution a little distracting; some
day maybe we should just run it once and commit the result, so it can
be hand-tuned.
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
The --interactive option behaves like "git commit", except that
"git add --interactive" is executed before committing. It is
incompatible with -a and -i.
Signed-off-by: Paolo Bonzini <bonzini@gnu.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* 'master' of git://repo.or.cz/git/fastimport:
Allow fast-import frontends to reload the marks table
Use atomic updates to the fast-import mark file
Preallocate memory earlier in fast-import
I'm giving fast-import a lesson on how to reload the marks table
using the same format it outputs with --export-marks. This way
a frontend can reload the marks table from a prior import, making
incremental imports less painful.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Bill Lear pointed out that it is easy to send out notifications of
changes with the update hook, but successful execution of the update
hook does not necessarily mean that the ref was actually updated.
Lock contention on the ref or being unable to append to the reflog
may prevent the ref from being changed. Sending out notifications
prior to the ref actually changing is very misleading.
To help this situation I am introducing two new hooks to the
receive-pack flow: pre-receive and post-receive. These new hooks
are invoked only once per receive-pack execution and are passed
three arguments per ref (refname, old-sha1, new-sha1).
The new post-receive hook is ideal for sending out notifications,
as it has the complete list of all refnames that were successfully
updated as well as the old and new SHA-1 values. This allows more
interesting notifications to be sent. Multiple ref updates could
be easily summarized into one email, for example.
The new pre-receive hook is ideal for logging update attempts, as it
is run only once for the entire receive-pack operation. It can also
be used to verify multiple updates happen at once, e.g. an update
to the `maint` head must also be accompained by a new annotated tag.
Lots of documentation improvements for receive-pack are included
in this change, as we want to make sure the new hooks are clearly
explained.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This patch adds support to archimport for remapping the branch
names to match those used in git more closely. This is useful
for projects that migrate to git (as opposed to users that want
to use git on Arch-based projects). For example, one can choose
an Arch branch name and call it "master".
The new command-line syntax works even if there is a colon in
a branch name, since only the part after the last colon is taken
to be the git name (git does not allow colons in branch names).
The new feature is implemented so that archives rotated every
year can also be remapped into a single git archive.
Signed-off-by: Paolo Bonzini <bonzini@gnu.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* 'master-for-junio' of git://repo.or.cz/git/fastimport:
fast-import: Fail if a non-existant commit is used for merge
fast-import: Avoid infinite loop after reset
* maint:
Fix diff-options references in git-diff and git-format-patch
Add definition of <commit-ish> to the main git man page.
Begin SubmittingPatches with a check list
fast-import: Fail if a non-existant commit is used for merge
fast-import: Avoid infinite loop after reset
Most of the git-diff-* documentation used [<common diff options>]
instead of [--diff-options], so make that change in git-diff and
git-format-patch.
In addition, git-format-patch didn't include the meanings of the diff
options.
Signed-off-by: Brian Gernhardt <benji@silverinsanity.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
It seems that some people prefer a short list to a long text. But even for
the latter group, a quick reminder list is useful. So, add a check list to
Documentation/SubmittingPatches of what to do to get your patch accepted.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Update the main git.html page to point at 1.5.0.3 documentation.
Update draft 1.5.1 release notes with what we have so far.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The existing --attach option did not create a true "attachment"
but multipart/mixed with Content-Disposition: inline. It should
have been with Content-Disposition: attachment.
Introduce --inline to add multipart/mixed that is inlined, and
make --attach to create an attachement.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* 'js/fetch-progress' (early part):
Fixup no-progress for fetch & clone
fetch & clone: do not output progress when not on a tty
Conflicts:
git-fetch.sh
* js/symlink:
Tell multi-parent diff about core.symlinks.
Handle core.symlinks=false case in merge-recursive.
Add core.symlinks to mark filesystems that do not support symbolic links.
* maint:
GIT 1.5.0.3
glossary: Add definitions for dangling and unreachable objects
user-manual: more detailed merge discussion
user-manual: how to replace commits older than most recent
user-manual: insert earlier of mention content-addressable architecture
user-manual: ensure generated manual references stylesheet
user-manual: reset to ORIG_HEAD not HEAD to undo merge
Documentation: mention module option to git-cvsimport
Define "dangling" and "unreachable" objects. Modified from original
text proposed by Yasushi Shoji.
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Add more details on conflict, including brief discussion of file stages.
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Signed-off-by: Junio C Hamano <junkio@cox.net>
"Modifying" an old commit by checking it out, --amend'ing it, then
rebasing on top of it, is a slightly cumbersome technique, but I've
found it useful frequently enough to make it seem worth documenting.
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The content-addressable design is too important not to be worth at least
a brief mention a little earlier on.
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The generated user manual is rather hard to read thanks to the lack of
the css that's supposed to be included from docbook-xsl.css.
I'm totally ignorant of the toolchain; grubbing through xmlto and
related scripts, the easiest way I could find to ensure that the
generated html links to the stylesheet is by calling xsltproc directly.
Maybe there's some better way.
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Signed-off-by: Junio C Hamano <junkio@cox.net>
As Linus pointed out recently on the mailing list,
git reset --hard HEAD^
doesn't undo a merge in the case where the merge did a fast-forward. So
the rcommendation here is a little dangerous.
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The git-cvsimport argument that specifies a cvs module to import should
probably be included in the default example.
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This patch documents the previously undocumented option --rename-section
and adds a new option to zap an entire section.
Signed-off-by: Paolo Bonzini <bonzini@gnu.org>
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* maint:
Unset NO_C99_FORMAT on Cygwin.
Fix a "pointer type missmatch" warning.
Fix some "comparison is always true/false" warnings.
Fix an "implicit function definition" warning.
Fix a "label defined but unreferenced" warning.
Document the config variable format.suffix
git-merge: fail correctly when we cannot fast forward.
builtin-archive: use RUN_SETUP
Fix git-gc usage note
Some file systems that can host git repositories and their working copies
do not support symbolic links. But then if the repository contains a symbolic
link, it is impossible to check out the working copy.
This patch enables partial support of symbolic links so that it is possible
to check out a working copy on such a file system. A new flag
core.symlinks (which is true by default) can be set to false to indicate
that the filesystem does not support symbolic links. In this case, symbolic
links that exist in the trees are checked out as small plain files, and
checking in modifications of these files preserve the symlink property in
the database (as long as an entry exists in the index).
Of course, this does not magically make symbolic links work on such defective
file systems; hence, this solution does not help if the working copy relies
on that an entry is a real symbolic link.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <junkio@cox.net>
