Earlier we renamed git-foo.sh to git-foo while installing, which
was mostly done by inertia than anything else. This however
made writing tests to use scripts harder.
This patch builds the scripts the same way as we build binaries
from their sources. As a side effect, you can now specify
non-standard paths you have your Perl binary is in when running
the make.
Signed-off-by: Junio C Hamano <junkio@cox.net>
git-daemon using inetd. does not work properly. inetd routes stderr onto the
network line just like stdout, which was apparently not expected to be so.
As the result of this, the stream is closed by the receiver, because some
"Packing %d objects\n" originating from pack_objects is first reported over
the line instead of the expected pack_header, and so the SIGNATURE test
fails. Here is a workaround.
Signed-off-by: Junio C Hamano <junkio@cox.net>
If you run `git branch --help', you will unexpectedly have created a new
branch named "--help". This simple patch adds logic and a usage
statement to catch this and similar problems, and adds a testcase for it.
Signed-off-by: Amos Waterland <apw@rossby.metr.ou.edu>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* getdomainname unavailable there.
* needs -lsocket for linkage.
* needs __EXTENSIONS__ at the beginning of convert-objects.c
[JC: I've done this slightly differently from what Patrick originally
sent to the list and dropped the bit that deals with installations
that has curl header and library at non-default location. I am
resisting the slipperly slope called autoconf.]
Signed-off-by: Junio C Hamano <junkio@cox.net>
As promised, this is the "big tool rename" patch. The primary differences
since 0.99.6 are:
(1) git-*-script are no more. The commands installed do not
have any such suffix so users do not have to remember if
something is implemented as a shell script or not.
(2) Many command names with 'cache' in them are renamed with
'index' if that is what they mean.
There are backward compatibility symblic links so that you and
Porcelains can keep using the old names, but the backward
compatibility support is expected to be removed in the near
future.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The code for listing the available subcommands was unnecessarily
complex.
Signed-off-by: David Kågedal <davidk@lysator.liu.se>
Signed-off-by: Junio C Hamano <junkio@cox.net>
parse-remote and rev-parse gets full documentation. Add skeleton for
archimport. Link them from the main git(7) page. Also move git-daemon
and git-request-pull out of 'undocumented' section.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Also make platform specific part more isolated. Currently we only
have Darwin defined, but I've taken a look at SunOS specific patch
(which I dropped on the floor for now) as well. Doing things this way
would make adding it easier.
Signed-off-by: Junio C Hamano <junkio@cox.net>
... and add a copyright notice.
[jc: also move its entry in git.txt from undocumented section.]
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This patch changes git-cvsimport-script so that it creates tag objects
instead of refs to commits, and adds an option, -u, to convert
underscores in branch and tag names to dots (since CVS doesn't allow
dots in branches and tags.)
Signed-off-by: Junio C Hamano <junkio@cox.net>
Add a "--compose" option that uses $EDITOR to edit an "introductory" email to the patch series.
Signed-off-by: Ryan Anderson <ryan@michonline.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The new test pattern is taken from HPA's klibc and klibc-kbuild trees,
which has many interesting renames (the commits
001eef5a19219e5b0601068a3d13874b88c0653e and
0037d1bc0deaf7daec3778496656cb04b4e4b9d0). The test pattern exposes
problems in the apply.c changes currently in the proposed updates
branch.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The message "\ No newline at end of file" used by diff(1) to mark
an incomplete line is locale dependent. We can't assume more than
that it begins with "\ ".
For example, given two files, "foo" and "bar", with appropriate
contents, 'diff -u foo bar' will produce the following output on
my system:
--- foo 2005-09-04 18:59:38.000000000 +0200
+++ bar 2005-09-04 18:59:16.000000000 +0200
@@ -1 +1 @@
-foobar
+foo
\ Ingen nyrad vid filslut
[jc: the check for the marker still uses the line length being no less
than 12 bytes for a sanity check, but I think it is safe to assume
that in other locales. I haven't checked the .po files from diff, tho'.]
Signed-off-by: Fredrik Kuivinen <freku045@student.liu.se>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Arch tags are full commits (without any changed files) as well. Trust Arch
to have put an unchanged tree in place (which seems to do reliably), and
just add a tag & new branch. Speeds up Arch imports significantly, and leaves
history in a much saner state.
Signed-off-by: Martin Langhoff <martin@catalyst.net.nz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
If there is no GIT directory, archimport will assume it is an initial import.
It now also supports incremental imports, skipping "seen" commits. You can
now run it repeatedly to pull new commits from the Arch repository.
Signed-off-by: Martin Langhoff <martin@catalyst.net.nz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
At least pretty_print_commit() expects to get NUL-terminated commit data to
work properly. unpack_sha1_rest(), which reads objects from separate files,
and unpack_non_delta_entry(), which reads non-delta-compressed objects from
pack files, already add the NUL byte after the object data, but patch_delta()
did not do it, which caused problems with, e.g., git-rev-list --pretty when
there are delta-compressed commit objects.
Signed-off-by: Sergey Vlasov <vsu@altlinux.ru>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Hi. This patch contains the following possible cleanups:
* Make some needlessly global functions in local-pull.c static
* Change 'char *' to 'const char *' where appropriate
Signed-off-by: Peter Hagervall <hager@cs.umu.se>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Replace references to "read-cache" with references to git-read-tree in the
documentation. I chose that because reference say "see read-cache about
stages", and stages are explained in git-read-tree.
Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Junio C Hamano <junkio@cox.net>
There is more detailed instruction for `project lead` later in
the tutorial to talk about the same, but at this point in the
flow of tutorial, the first time reader has no way of knowing it.
Signed-off-by: Junio C Hamano <junkio@cox.net>
On NetBSD 3 we trigger an error:
[: ==: unexpected operator
Double-equal is accepted by bash built-in '[' and bash(1) suggests
using '=' for strict POSIX compliance (test(1) from coreutils does not
mention '=='). Eradicate their uses everywhere.
[jc: Somebody with a pseudonym kindly sent a message to let
me know about the problem privately; I do not have access to a NetBSD
box.]
Signed-off-by: Junio C Hamano <junkio@cox.net>
The rewrite done while adding the shorthand support made the remote
refname recorded in the commit message too long for human consumption,
while losing information by using the shorthand not the real URL to
name the remote repository there. They were both bad changes done
without enough thinking.
Pointed out by Linus.
Signed-off-by: Junio C Hamano <junkio@cox.net>
If somebody tries to run `git update-cache foo', where foo is a new
file, git dies with a rather cryptic error message:
fatal: Unable to add foo to database
This trivial patch makes git explain what probably went wrong. It is
not a perfect diagnosis of all error paths, but for 90% of the cases it
should provide the user with the clue they need.
[jc: I ended up wording slightly differently, and fixed another
confusing error message I noticed while reviewing the code.]
Signed-off-by: Amos Waterland <apw@rossby.metr.ou.edu>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Update 'git commit' to use the updated `git status`. Also earlier
the `-s` flag was ignored for the initial commit.
Signed-off-by: Junio C Hamano <junkio@cox.net>
It used 'die' without including git-sh-setup-script; since everything
it uses are subdirectory-aware, instead of including the script to
force it to be run from the top, use echo & exit.
Signed-off-by: Junio C Hamano <junkio@cox.net>
