Usually these values get fed to fmt_ident, which will trim
any cruft anyway, but there are a few code paths which use
them directly. Let's clean them up for the benefit of those
callers. Furthermore, fmt_ident will look at the pre-trimmed
value and decide whether to invoke ERROR_ON_NO_NAME; this
check can be fooled by a name consisting only of spaces.
Note that we only bother to clean up when we are pulling the
information from gecos or from system files. Any other value
comes from a config file, where we will have cleaned up
accidental whitespace already.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that we accept arbitrary-sized names and email
addresses, the only remaining limit is in the actual
formatting of the names into a buffer. The current limit is
1000 characters, which is not likely to be reached, but
using a strbuf is one less error condition we have to worry
about.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we construct an email address from the username and
hostname, we generate the host part of the email with this
procedure:
1. add the result of gethostname
2. if it has a dot, ok, it's fully qualified
3. if not, then look up the unqualified hostname via
gethostbyname; take the domain name of the result and
append it to the hostname
Step 3 can actually produce a bogus result, as the name
returned by gethostbyname may not be related to the hostname
we fed it (e.g., consider a machine "foo" with names
"foo.one.example.com" and "bar.two.example.com"; we may have
the latter returned and generate the bogus name
"foo.two.example.com").
This patch simply uses the full hostname returned by
gethostbyname. In the common case that the first part is the
same as the unqualified hostname, the behavior is identical.
And in the case that it is not the same, we are much more
likely to be generating a valid name.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When getpwuid fails, we give a cute but cryptic message.
While it makes sense if you know that getpwuid or identity
functions are being called, this code is triggered behind
the scenes by quite a few git commands these days (e.g.,
receive-pack on a remote server might use it for a reflog;
the current message is hard to distinguish from an
authentication error). Let's switch to something that gives
a little more context.
While we're at it, we can factor out all of the
cut-and-pastes of the "you don't exist" message into a
wrapper function. Rather than provide xgetpwuid, let's make
it even more specific to just getting the passwd entry for
the current uid. That's the only way we use getpwuid anyway,
and it lets us make an even more specific error message.
The current message also fails to mention errno. While the
usual cause for getpwuid failing is that the user does not
exist, mentioning errno makes it easier to diagnose these
problems. Note that POSIX specifies that errno remain
untouched if the passwd entry does not exist (but will be
set on actual errors), whereas some systems will return
ENOENT or similar for a missing entry. We handle both cases
in our wrapper.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we pull the user's name from the GECOS field of the
passwd file (or generate an email address based on their
username and hostname), we put the result into a
static buffer. While it's extremely unlikely that anybody
ever hit these limits (after all, in such a case their
parents must have hated them), we still had to deal with the
error cases in our code.
Converting these static buffers to strbufs lets us simplify
the code and drop some error messages from the documentation
that have confused some users.
The conversion is mostly mechanical: replace string copies
with strbuf equivalents, and access the strbuf.buf directly.
There are a few exceptions:
- copy_gecos and copy_email are the big winners in code
reduction (since they no longer have to manage the
string length manually)
- git_ident_config wants to replace old versions of
the default name (e.g., if we read the config multiple
times), so it must reset+add to the strbuf instead of
just adding
Note that there is still one length limitation: the
gethostname interface requires us to provide a static
buffer, so we arbitrarily choose 1024 bytes for the
hostname.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The fmt_ident function gets a flag that tells us whether to
die if the name field is blank. If it is blank and we don't
die, then we fall back to the username from the passwd file.
The current code writes the value into git_default_name.
However, that's not necessarily correct, as the empty value
might have come from git_default_name, or it might have been
passed in. This leads to two potential problems:
1. If we are overriding an empty name in the passed-in
value, then we may be overwriting a perfectly good name
(from gitconfig or gecos) in the git_default_name
buffer. Later calls to fmt_ident will end up using the
fallback name, even though a better name was available.
2. If we override an empty gecos name, we end up with the
fallback name in git_default_name. A later call that
uses IDENT_ERROR_ON_NO_NAME will see the fallback name
and think that it is a good name, instead of producing
an error. In other words, a blank gecos name would
cause an error with this code:
git_committer_info(IDENT_ERROR_ON_NO_NAME);
but not this:
git_committer_info(0);
git_committer_info(IDENT_ERROR_ON_NO_NAME);
because in the latter case, the first call has polluted
the name buffer.
Instead, let's make the fallback a per-invocation variable.
We can just use the pw->pw_name string directly, since it
only needs to persist through the rest of the function (and
we don't do any other getpwent calls).
Note that while this solves (1) for future invocations of
fmt_indent, the current invocation might use the fallback
when it could in theory load a better value from
git_default_name. However, by not passing
IDENT_ERROR_ON_NO_NAME, the caller is indicating that it
does not care too much about the name, anyway, so we don't
bother; this is primarily about protecting future callers
who do care.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We try to generate a sane message id for cover letters and
threading by appending some changing bits to the front of
the user's email address. The current code parses the email
out of the results of git_committer_info, but we can do this
much more easily by just calling ident_default_email
ourselves.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We use fgets to read the /etc/mailname file, which means we
will typically end up with an extra newline in our
git_default_email. Most of the time this doesn't matter, as
fmt_ident will skip it as cruft, but there is one code path
that accesses it directly (in http-push.c:lock_remote).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There's no reason anybody outside of ident.c should access
these directly (they should use the new accessors which make
sure the variables are initialized), so we can make them
file-scope statics.
While we're at it, move user_ident_explicitly_given into
ident.c; while still globally visible, it makes more sense
to reside with the ident code.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There's no reason for this to be in config, except that once
upon a time all of the config parsing was there. It makes
more sense to keep the ident code together.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The record_person function just parses out the "name" field
of the person line in a commit and adds it to a string_list.
The only reason we need an extra buffer is that the
string_list functions require a NUL-terminated string.
Instead of the static buffer, we can just allocate a
temporary NUL-terminated copy. In addition to removing a
useless limit, this removes the only user of MAX_GITNAME
outside of ident.c.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By calling the ident_default_email accessor, we can be sure
that the default value is actually filled-in.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function sets up the default name, email, and date, and
is not publicly available. Let's split it into three public
functions so that callers can get just the parts they need.
While we're at it, let's change the interface to simple
accessors. The original function was called only by fmt_ident,
and contained logic for "if we already have some other
value, don't load the default" which properly belongs in
fmt_ident.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Running "git checkout" on an unborn branch used to corrupt HEAD
(regression in 1.7.10); this makes it error out.
By Erik Faye-Lund
* ef/checkout-empty:
checkout: do not corrupt HEAD on empty repo
Gives a better DWIM behaviour for --pretty=format:%gd, "stash list", and
"log -g", depending on how the starting point ("master" vs "master@{0}" vs
"master@{now}") and date formatting options (e.g. "--date=iso") are given
on the command line.
By Jeff King (4) and Junio C Hamano (1)
* jk/maint-reflog-walk-count-vs-time:
reflog-walk: tell explicit --date=default from not having --date at all
reflog-walk: always make HEAD@{0} show indexed selectors
reflog-walk: clean up "flag" field of commit_reflog struct
log: respect date_mode_explicit with --format:%gd
t1411: add more selector index/date tests
Fix yet another message construction by concatenating pieces of sentenes,
which is unfriendly to i18n.
By Nguyễn Thái Ngọc Duy
* nd/i18n-branch-lego:
branch: remove lego in i18n tracking info strings
The cases "git push" fails due to non-ff can be broken into three
categories; each case is given a separate advise message.
By Christopher Tiwald (2) and Jeff King (1)
* ct/advise-push-default:
Fix httpd tests that broke when non-ff push advice changed
clean up struct ref's nonfastforward field
push: Provide situational hints for non-fast-forward errors
"git repack" used to write out unreachable objects as loose objects
when repacking, even if such loose objects will immediately pruned
due to its age.
By Jeff King
* jk/repack-no-explode-objects-from-old-pack:
gc: use argv-array for sub-commands
argv-array: add a new "pushl" method
argv-array: refactor empty_argv initialization
gc: do not explode objects which will be immediately pruned
Unlike "git rev-parse --show-cdup", "--show-prefix" did not give an
empty line when run at the top of the working tree.
By Ross Lagerwall
* rl/show-empty-prefix:
rev-parse --show-prefix: add in trailing newline
This option was not yet described in the gitmodules documentation. We
only described it in the 'git submodule' command documentation but
gitmodules is the more natural place to look.
A short reference in the 'git submodule' documentation should be
sufficient since the details can now be found in the documentation to
gitmodules.
Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git status --porcelain" ignored "--branch" option by mistake. The output
for "git status --branch -z" was also incorrect and did not terminate the
record for the current branch name with NUL as asked.
By Jeff King
via Jeff King
* jk/status-porcelain-z-b:
status: refactor colopts handling
status: respect "-b" for porcelain format
status: fix null termination with "-b"
status: refactor null_termination option
commit: refactor option parsing
Some time ago, "git clone" lost the progress output for its "checkout"
phase; when run without any "--quiet" option, it should give progress to
the lengthy operation.
By Erik Faye-Lund
* ef/maint-clone-progress-fix:
clone: fix progress-regression
When checking out another commit from an already detached state, we used
to report all commits that are not reachable from any of the refs as
lossage, but some of them might be reachable from the new HEAD, and there
is no need to warn about them.
By Johannes Sixt
* js/checkout-detach-count:
checkout (detached): truncate list of orphaned commits at the new HEAD
t2020-checkout-detach: check for the number of orphaned commits
Your build platform may support hardlinks but you may prefer not to use
them, e.g. when installing to DESTDIR to make a tarball and untarring on
a filesystem that has poor support for hardlinks.
The Makefile in git-gui project may need to learn to honor the same
setting; it unconditionally creates git-citool by hardlinking git-gui.
* jc/install-no-hardlinks:
Makefile: NO_INSTALL_HARDLINKS
Stream large blobs directly out to archive files without slurping
everything in memory first.
By René Scharfe (6) and Nguyễn Thái Ngọc Duy (4)
* nd/stream-to-archive:
t5000: rationalize unzip tests
archive-zip: streaming for deflated files
archive-zip: streaming for stored files
archive-zip: factor out helpers for writing sizes and CRC
archive-zip: remove uncompressed_size
archive-tar: stream large blobs to tar file
archive: delegate blob reading to backend
archive-tar: unindent write_tar_entry by one level
archive-tar: turn write_tar_entry into blob-writing only
streaming: void pointer instead of char pointer
Refs API is updated to lazily read sub-hierarchies of refs/ namespace,
so that we do not have to grab everything from the filesystem when we
are only interested in listing branches, for example.
By Michael Haggerty (17) and Junio C Hamano (1)
* mh/ref-api-lazy-loose:
refs: fix find_containing_dir() regression
refs: read loose references lazily
read_loose_refs(): eliminate ref_cache argument
struct ref_dir: store a reference to the enclosing ref_cache
search_for_subdir(): return (ref_dir *) instead of (ref_entry *)
get_ref_dir(): add function for getting a ref_dir from a ref_entry
read_loose_refs(): rename function from get_ref_dir()
refs: wrap top-level ref_dirs in ref_entries
find_containing_dir(): use strbuf in implementation of this function
bisect: copy filename string obtained from git_path()
do_for_each_reflog(): use a strbuf to hold logfile name
do_for_each_reflog(): return early on error
get_ref_dir(): take the containing directory as argument
refs.c: extract function search_for_subdir()
get_ref_dir(): require that the dirname argument ends in '/'
get_ref_dir(): rename "base" parameter to "dirname"
get_ref_dir(): use a strbuf to hold refname
get_ref_dir(): return early if directory cannot be read
"git push" over smart-http lost progress output a few releases ago.
By Jeff King
* jk/maint-push-progress:
t5541: test more combinations of --progress
teach send-pack about --[no-]progress
send-pack: show progress when isatty(2)
