The original sanitization code was just taken from the
remotes2config.sh shell script in contrib.
Credit to Avery Pennarun for noticing this mistake, and Junio
for clarifying the rules for config section names:
Junio C Hamano wrote in <7vfxr23s6m.fsf@gitster.siamese.dyndns.org>:
> In
>
> [foo "bar"] baz = value
>
> foo and baz must be config.c::iskeychar() (and baz must be isalpha()), but
> "bar" can be almost anything.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit ffe256f9ba ("git-svn: Speed up fetch")
introduced changes that create a temporary file for each object fetched by
svn. These files should be deleted automatically, but perl apparently
doesn't do this until the process exits (or perhaps when its garbage
collector runs).
This means that on a large fetch, especially with lots of branches, we
sometimes fill up /tmp completely, which prevents the next temp file from
being written completely. This is aggravated by the fact that a new temp
file is created for each updated file, even if that update produces a file
identical to one already in git. Thus, it can happen even if there's lots
of disk space to store the finished repository.
We weren't adequately checking for write errors, so this would result in an
invalid file getting committed, which caused git-svn to fail later with an
invalid checksum.
This patch adds a check to syswrite() so similar problems don't lead to
corruption in the future. It also unlink()'s each temp file explicitly
when we're done with it, so the disk doesn't need to fill up.
Signed-off-by: Avery Pennarun <apenwarr@gmail.com>
Tested-by: Björn Steinbrink <B.Steinbrink@gmx.de>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Suppose someone fetches git-svn-ified commits from another repo and then
attempts to use 'git-svn init --rewrite-root=foo bar'. Using git svn rebase
after that will fail badly:
* For each commit tried by working_head_info, rebuild is called indirectly.
* rebuild will iterate over all commits and skip all of them because the
URL does not match. Because of that no rev_map file is generated at all.
* Thus, rebuild will run once for every commit. This takes ages.
* In the end there still isn't any rev_map file and thus working_head_info
fails.
Addressing this behaviour fixes an apparently not too uncommon problem with
providing git-svn mirrors of Subversion repositories. Some repositories are
accessed using different URLs depending on whether the user has push
privileges or not. In the latter case, an anonymous URL is often used that
differs from the push URL. Providing a mirror that is usable in both cases
becomes a lot more possible with this change.
Signed-off-by: Jan Krüger <jk@jk.gs>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In git, all commits end in exactly one newline character. In svn, commits
end in zero or more newlines. Thus, when importing commits from svn into
git, git-svn always appends two extra newlines to ensure that the
git-svn-id: line is separated from the main commit message by at least one
blank line.
Combined with the terminating newline that's always present in svn commits
produced by git, you usually end up with two blank lines instead of one
between the commit message and git-svn-id: line, which is undesirable.
Instead, let's remove all trailing whitespace from the git commit on the way
through to svn.
Signed-off-by: Avery Pennarun <apenwarr@gmail.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If url://repo/trunk is the current Git branch, prop_walk strips trunk
from the path name. That is useful as, for example "git svn show-ignore"
should not return results like
trunk/foo
but
foo
if svn:ignore for trunk includes foo.
The problem now is that prop_walk strips trunk from the path and then
calls itself recursively. But now trunk is missing in the path and
get_dir fails, because it is called for a non existing path.
The attached patch fixed the problem, by adding the previously stipped
$self->{path} in the recursive call. I tested it with my current
git-svn repository for the commands show-ignore and show-external.
Patch was submitted through
http://bugs.debian.org/477393
Signed-off-by: Gerrit Pape <pape@smarden.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When working with multiple branches in an svn repository, it can be
useful to verify the svn repository and local tracking branch that will
be used for the rebase operation.
Signed-off-by: Seth Falcon <seth@userprimary.net>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Given an SVN repo file:///tmp/svntest/repo, trying to commit changes
to a file proj/trunk/foo.txt in that repo with this command line
git svn commit-diff -r2 HEAD^ HEAD file:///tmp/svntest/repo/proj/trunk
gave the error message
Filesystem has no item: File not found: transaction '2-6', path
'/proj/trunk/proj/trunk/foo.txt'
This fixes the duplication.
Signed-off-by: Karl Hasselström <kha@treskal.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Recent "git-svn optimization" series introduced Git::cat_blob() subroutine
whose interface was broken in that it returned the size of the blob but
signalled an error by returning 0. You can never use an empty blob with
such an interface.
This fixes the interface to return a negative value to signal an error.
Reported by Björn Steinbrink.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ar/batch-cat:
change quoting in test t1006-cat-file.sh
builtin-cat-file.c: use parse_options()
git-svn: Speed up fetch
Git.pm: Add hash_and_insert_object and cat_blob
Git.pm: Add command_bidi_pipe and command_close_bidi_pipe
git-hash-object: Add --stdin-paths option
Add more tests for git hash-object
Move git-hash-object tests from t5303 to t1007
git-cat-file: Add --batch option
git-cat-file: Add --batch-check option
git-cat-file: Make option parsing a little more flexible
git-cat-file: Small refactor of cmd_cat_file
Add tests for git cat-file
* ap/svn:
git-svn: add test for --add-author-from and --use-log-author
git-svn: add documentation for --add-author-from option.
git-svn: Add --add-author-from option.
git-svn: add documentation for --use-log-author option.
We were spending a lot of time forking/execing git-cat-file and
git-hash-object. We now maintain a global Git repository object in order to use
Git.pm's more efficient hash_and_insert_object and cat_blob methods.
Signed-off-by: Adam Roben <aroben@apple.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-svn blame produced output in the format of git blame; in environments
where there are scripts that read the output of svn blame, it's useful
to be able to use them with the output of git-svn. The git-compatible
format is still available using the new "--git-format" option.
This also fixes a bug in the initial git-svn blame implementation; it was
bombing out on uncommitted local changes.
Signed-off-by: Steven Grimm <koreth@midwinter.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With this, git svn clone -s http://svn.gnome.org/svn/gtk+
is successful.
Also modified the funky rename test for this, which _does_
include escaped '+' signs for HTTP URLs. SVN seems to accept
either "+" or "%2B" in filenames and directories (just not the
main URL), so I'll leave it alone for now.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When having a svn:ignore that ignores the .gitignore file the -f
option to git add must be used to avoid git complaining about adding
an ignored file and hence stop the process of creating .gitignores.
Signed-off-by: Gustaf Hendeby <hendeby@isy.liu.se>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This option adds a From: line (based on the commit's author information)
at the beginning of the body of the commit log message when sending to
svn, if a From: or Signed-off-by: header does not exist.
This, combined with --use-log-author, can retain the author field of commits
through a round trip from git to svn and back.
Signed-off-by: Avery Pennarun <apenwarr@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using git-cvsimport, the author is inferred from the cvs commit,
e.g. cvs commit logname is foobaruser, then the author field in git
results in:
Author: foobaruser <foobaruser>
Which is not perfect, but perfectly acceptable given the circumstances.
The default git-svn import however, results in:
Author: foobaruser <foobaruser@acf43c95-373e-0410-b603-e72c3f656dc1>
When using mixes of imports, from CVS and SVN into the same git
repository, you'd like to harmonise the imports to the format cvsimport
uses.
git-svn supports an experimental option --use-log-author which currently
results in the same logentry as without that option when no From: or
Signed-off-by: is found in the logentry ($email currently ends up empty,
and hence is generated again).
This patches harmonises the result with cvsimport, and makes
git-svn --use-log-author produce:
Author: foobaruser <foobaruser>
Signed-off-by: Stephen R. van den Berg <srb@cuci.nl>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The command
git svn clone (URL of an empty SVN repo here)
works, creates an empty git repository. I can perform the initial
commit there, but then, "git svn dcommit" says :
Use of uninitialized value in concatenation (.) or string at .../git-svn line 414.
Committing to ...
Unable to determine upstream SVN information from HEAD history
I guess a correct management of the initial commit in git-svn would be
hard to implement, but at least, the error message can be improved.
First step is something like the patch below, and better would be for
"git svn clone" to warn that it won't be able to do much with the
cloned repo.
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Otherwise, there is a possible interaction with UTF-8 locales in
combination with PERL_UNICODE, resulting in "inconsistent size: 40" or
"read:"-type errors.
See also:
perldoc -f binmode
<http://perldoc.perl.org/perl581delta.html#UTF-8-no-longer-default-under-UTF-8-locales>
Signed-off-by: Michael Weber <michaelw@foldr.org>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When trying to import from svn using an author file, git-svn bails out
if it encounters a blank author. The attached patch changes this
behavior and allow using the author file with blanks authors.
I came across this bug while importing from a cvs2svn repo where the
initial revision (1) has a blank author. This doesn't break the behavior
of bailing out when an unknown author is encountered.
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a user has customized format.pretty in config, git-svn rebase fails with:
Unable to determine upstream SVN information from working tree history
because the command expects to read the commit log in the default format.
This fixes the command to explicitly ask for the format it wants to read
from.
Signed-off-by: Pedro Melo <melo@simplicidade.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using git-svn to follow only a single (empty) path per
svn-remote (i.e. not using --stdlayout), following the history
of a renamed path was broken in
c586879cdf.
This reverts the regression for the single (emtpy) path per
svn-remote case.
To avoid breaking the tests in a committed revision, this is an
addendum to a patch originally submitted by
Santhosh Kumar Mani <santhoshmani@gmail.com>:
> git-svn: add test for renamed directory fetch
>
> This test tries to fetch a directory which had renames in the
> history from a SVN repository.
[ew: unneccesary dependency on the starting an HTTP server
removed from Santhosh's original test.]
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jonathan Scott Duff wrote:
> Recently I tried "git svn showignore" on my parrot repository and it
> failed. I tracked it down to the prop_walk() sub. When it recurses,
> $path has an extra / on the beginning (i.e., when it recurses, it
> tries to get the props for "//apps" instead of "/apps"). I *think*
> this is because $path is used in the recursive call rather than $p
> (which seems to contain a properly transformed $path). Anyway, I've
> attached a patch that works for me and I think is generally the right
> thing.
Patch-submitted-by: Jonathan Scott Duff
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-svn project names are percent-escaped ever since f5530b8
(git-svn: support for funky branch and project names over HTTP(S),
2007-11-11).
Unfortunately this breaks the scenario where the user hands git-svn an
already-escaped URI. Fix the regexp to skip over what looks like
existing percent escapes, and test this scenario.
Signed-off-by: Kevin Ballard <kevin@sb.org>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Make man page building quiet when DOCBOOK_XSL_172 is defined
git-new-workdir: Share SVN meta data between work dirs and the repository
rev-parse: fix meaning of rev~ vs rev~0.
git-svn: don't blindly append '*' to branch/tags config
Previously, git-svn would blindly append '*' even if it was specified by
the user during initialization (for certain SVN setups, it is
necessary).
Now, the following command will work correctly:
git svn init -T trunk/docutils \
-t 'tags/*/docutils' \
-b 'branches/*/docutils' \
svn://svn.berlios.de/docutils
Thanks to martin f krafft for the bug report:
> My git-svn target configuration is
>
> [svn-remote "svn"]
> url = svn://svn.berlios.de/docutils
> fetch = trunk/docutils:refs/remotes/trunk
> branches = branches/*/docutils:refs/remotes/*
> tags = tags/*/docutils:refs/remotes/tags/*
>
> Unfortunately, when I run
>
> git-svn init -T trunk/docutils -t 'tags/*/docutils'
> -b 'branches/*/docutils'
>
> then I get (note the two asterisks on the left hand side):
>
> branches = branches/*/docutils/*:refs/remotes/*
> tags = tags/*/docutils/*:refs/remotes/tags/*
>
> I took a brief stab at the code but I can't even figure out where
> the /* is appended, so I defer to you.
>
> It should be trivial to keep git-svn from appending /* if the left
> side already contains an asterisk.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Tested-by: martin f krafft <madduck@madduck.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
git-svn: fix find-rev error message when missing arg
t0021: tr portability fix for Solaris
launch_editor(): allow spaces in the filename
git rebase --abort: always restore the right commit
Just let the user know that a revision argument is missing instead of
a perl error. This error message mimic the "init" error message, but
could be improved.
Signed-off-by: Marc-Andre Lureau <marcandre.lureau@gmail.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
GIT 1.5.4.4
ident.c: reword error message when the user name cannot be determined
Fix dcommit, rebase when rewriteRoot is in use
Really make the LF after reset in fast-import optional
When the rewriteRoot setting is used with git-svn, it causes the svn
IDs added to commit messages to bear a different URL than is actually
used to retrieve Subversion data.
It is common for Subversion repositories to be available multiple
ways: for instance, HTTP to the public, and svn+ssh to people with
commit access. The need to switch URLs for access is fairly common as
well -- perhaps someone was just given commit access. To switch URLs
without having to rewrite history, one can use the old url as a
rewriteRoot, and use the new one in the svn-remote url setting.
This works well for svn fetching and general git commands.
However, git-svn dcommit, rebase, and perhaps other commands do not
work in this scenario. They scan the svn ID lines in commit messages
and attempt to match them up with url lines in [svn-remote] sections
in the git config.
This patch allows them to match rewriteRoot options, if such options
are present.
Signed-off-by: John Goerzen <jgoerzen@complete.org>
Acked-by: Eric Wong <normalperson@yhbt.net>
This command is identical to `git blame', but it shows SVN revision
numbers instead of git commit hashes.
[ew: support "^initial commit" and minor formatting fixes]
Signed-off-by: Tim Stoakes <tim@stoakes.net>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This way we can avoid the spawning of a new SVN::Ra session by
reusing the existing one.
The most problematic issue is that some svn servers disallow
too many connections from a single IP, so this will allow
git-svn to fetch from those repositories with a higher success
rate by using fewer connections.
This sometimes showed up as a new (and redundant)
[svn-remote "$parent_refname"] entry in $GIT_DIR/svn/.metadata.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Let "git svn" run "git gc --auto" every 1000 imported commits to
reduce the number of loose objects.
To handle the common use case of frequent imports, where each
invocation typically fetches much less than 1000 commits, also run gc
unconditionally at the end of the import.
"1000" is the same number that was used by default when we called
git-repack. It isn't necessarily still the best choice.
Signed-off-by: Karl Hasselström <kha@treskal.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a moment, we'll start calling git-gc --auto instead, since it is a
better fit to what we're trying to accomplish.
The command line options are still accepted, but don't have any
effect, and we warn the user about that.
Signed-off-by: Karl Hasselström <kha@treskal.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This should reduce disk space usage when doing large imports.
We'll be switching to "gc --auto" post-1.5.4 to handle
repacking for us.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Repositories generated by svnsync cannot be relied on to have
properly set revprops without newlines in UUIDs and URLs. There
may be broken versions of svnsync out there that append extra
newlines to UUIDs, or the revprops could've been changed by
repository administrators at any time, too.
At least one repository we've come across has an embedded
newline erroneously set in the svnsync-uuid prop. This is bad
because the trailing newline is taken as another record by the
Git.pm library, and the wantarray detection causes tmp_config()
to return an array with an empty-but-existing second element.
We will now strip leading and trailing whitespace both before
setting and after reading the uuid and url for svnsync values.
We will also force tmp_config to return a single scalar when
reading existing values.
SVN UUIDs should never have whitespace in them, and SVN
repository URLs should be URI-escaped, so neither of those
values we ever see in git-svn should actually have whitespace
in them.
Thanks to Dennis Schridde for the bug report and Junio for
helping diagnose this.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
prop_walk adds a leading / to all subdirectory paths. Unfortunately
this causes a problem when the remote repo lives in a subdirectory itself,
as the leading / causes subsequent PROPFIND calls to be executed on
the wrong path. Trimming the / before calling the PROPFIND fixes this problem.
Signed-off-by: Kevin Ballard <kevin@sb.org>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
I've heard of several users puzzled by this, and it sometimes it
appears as if git-svn is doing nothing on slower connections and
larger repositories.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
SVN requires that paths be URI-escaped for HTTP(S) repositories.
file:// and svn:// repositories do not need these rules.
Additionally, accessing individual paths inside repositories
(check_path() and get_log() do NOT require escapes to function
and in fact it breaks things).
Noticed-by: Michael J. Cohen <mjc@cruiseplanners.com>
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
commit 3157dd9e89 (git-svn: unlink
internal index files after operations) introduced unlinking
index files after fetching. However, this missed indices for
refs that were created by globbing branches and tags. This will
track all refs we ever touch during a fetch and unlink them at
exit time.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's possible for bad clients to commit symlinks without the
5-character "link " prefix in symlinks. So guard around this
bug in SVN and make a best effort to create symlinks if the
"link " prefix is missing.
More information on this SVN bug is described here:
http://subversion.tigris.org/issues/show_bug.cgi?id=2692
To be pedantic, there is still a corner case that neither we nor
SVN can handle: If somebody made a link using a broken SVN
client where "link " is the first part of its path, e.g.
"link sausage", then we'd end up having a symlink which points
to "sausage" because we incorrectly stripped the "link ".
Hopefully this hasn't happened in practice, but if it has,
it's not our fault SVN is broken :)
Thanks to Benoit Sigoure and Sverre Johansen for reporting
and feedback.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
We set the 6 environment variables for controlling
committer/author email/name/time for every commit.
We do this in the parent process to be passed to
git-commit-tree, because open3() doesn't afford us the control
of doing it only in the child process. This means we leave them
hanging around in the main process until the next revision comes
around and all 6 environment variables are overwridden again.
Unfortunately, for the last commit, leaving them hanging around
means the git-rebase invocation will pick it up, rewriting the
rebased commit with incorrect author information. This should fix
it.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Previously, git-svn would ignore cases where the path we're
tracking is removed from the repository. This was to prevent
heads with follow-parent from ending up with a tree full of
empty revisions (and thus breaking rename detection).
The previous behavior is fine until the path we're tracking
is re-added later on, leading to the old files being merged
in with the new files in the directory (because the old
files were never marked as deleted)
We will now only remove all the old files locally that were
deleted remotely iff we detect the directory we're in is being
created from scratch.
Thanks for Marcus D. Hanwell for the bug report and
Peter Baumann for the analysis.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Being git, we can generate these very quickly on the fly as
needed, so there's no point in wasting space for these things
for large projects.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current parsing for From: and Signed-off-by: lines handles fully
specified names:
From: Full Name <email@address>
Expand this to include the raw email addresses and straight "names":
From: email@address -> email <email@address>
From: Full Name -> Full Name <unknown>
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-config recently learned a --get-colorbool option. By
using it, we will get the same color=auto behavior that
other git commands have.
Specifically, this fixes the case where "color.diff = true"
meant "always" in git-svn, but "auto" in other programs.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This reinstates an old optimization in .rev_db which
stored the highest revision number we scanned, allowing
us to avoid scanning the SVN log for those revisions
again in a subsequent invocation.
This means the last 24-byte record in a .rev_map file
can be a 4-byte SVN revision number with 20-bytes of
zeroes representing a non-existent commit. This record
can and will be overwritten when a new commit iff
the commit is all zeroes.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Migrations are done automatically on an as-needed basis when new
revisions are to be fetched. Stale remote branches do not get
migrated, yet.
However, unless you set noMetadata or useSvkProps it's safe to
just do:
find $GIT_DIR/svn -name '.rev_db*' -print0 | xargs rm -f
to purge all the old .rev_db files.
The new format is a one-way migration and is NOT compatible with
old versions of git-svn.
This is the replacement for the rev_db format, which was too big
and inefficient for large repositories with a lot of sparse history
(mainly tags).
The format is this:
- 24 bytes for every record,
* 4 bytes for the integer representing an SVN revision number
* 20 bytes representing the sha1 of a git commit
- No empty padding records like the old format
- new records are written append-only since SVN revision numbers
increase monotonically
- lookups on SVN revision number are done via a binary search
- Piping the file to xxd(1) -c24 is a good way of dumping it for
viewing or editing, should the need ever arise.
As with .rev_db, these files are disposable unless noMetadata or
useSvmProps is set.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If you run "git-svn rebase" while sitting on a topic branch, there is
no need to create a "master" branch if one didn't exist already. The
branch was created implicitly by the automatic checkout after fetching,
which in the case of rebase isn't actually necessary anyway.
Signed-off-by: Steven Grimm <koreth@midwinter.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
show-externals can be used by scripts to provide svn:externals-like
functionality. For example, a script can list all of the externals and then
use check out the listed URLs at the appropriate paths, similar to what the svn
client does. Said script (or perhaps git-svn itself, in the future) could
simply invoke svn export on the paths, or it could go one further, using
git-svn clone and even git-submodule together to better integrate externals
checkouts.
The implementation is shamelessly copied from show-ignores. A more general
command to list user-specified properties is probably a better idea.
Signed-off-by: Vineet Kumar <vineet@doorstop.net>
Acked-by: Eric Wong <normalperson@yhbt.net>
Digest::MD5 is loaded regardless of the package in which it's
declared, so move its 'use' statement and the md5sum() function
into the main package.
Signed-off-by: David D. Kilzer <ddkilzer@kilzer.net>
Acked-by: Eric Wong <normalperson@yhbt.net>
Add support for pulling the real author of a commit from the From:
and first Signed-off-by: fields of the SVN commit message.
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Acked-by: Eric Wong <normalperson@yhbt.net>
Previously, git-svn first read the .git/config file for settings as if
current working directory was the repository top-directory, and after
that made sure to cd into top-directory. The result was a silent
failur to read configuration settings. This patch changes the order
these two things are done.
Signed-off-by: Gustaf Hendeby <hendeby@isy.liu.se>
Acked-by: Eric Wong <normalperson@yhbt.net>
Cache the repository root whenever we connect to the repository.
This will allow us to notice URL changes if the user changes the
URL in .git/config, too.
If the repository is no longer accessible, or if `git svn info'
is the first and only command run; then '(offline)' will be
displayed for "Repository Root:" in the output.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Return the svn URL for the given path, or return the svn
repository URL if no path is given.
Added 18 tests to t/t9119-git-svn-info.sh.
Signed-off-by: David D. Kilzer <ddkilzer@kilzer.net>
Acked-by: Eric Wong <normalperson@yhbt.net>
Implement "git-svn info" for files and directories based on the
"svn info" command. Note that the -r/--revision argument is not
supported yet.
Added 18 tests in t/t9119-git-svn-info.sh.
[ew: small fix to work without arguments on all working directories]
Signed-off-by: David D. Kilzer <ddkilzer@kilzer.net>
Acked-by: Eric Wong <normalperson@yhbt.net>
Extacted canonicalize_path() in the main package.
Created new Git::SVN::Util package with an md5sum() function. A
new package was created so that Digest::MD5 did not have to be
loaded in the main package. Replaced code in the SVN::Git::Editor
and SVN::Git::Fetcher packages with calls to md5sum().
Extracted the format_svn_date(), parse_git_date() and
set_local_timezone() functions within the Git::SVN::Log package.
Signed-off-by: David D. Kilzer <ddkilzer@kilzer.net>
Acked-by: Eric Wong <normalperson@yhbt.net>
When unreachable revisions are given to "svn log", it displays all commit
logs in the given range that exist in the current tree. (If no commit
logs are found in the current tree, it simply prints a single commit log
separator.) This patch makes "git-svn log" behave the same way.
Ten tests added to t/t9116-git-svn-log.sh.
Signed-off-by: David D Kilzer <ddkilzer@kilzer.net>
Acked-by: Eric Wong <normalperson@yhbt.net>
The "svn log -rM:N" command shows commit logs inclusive in the range [M,N].
Previously "git-svn log" always excluded the commit log for the smallest
revision in a range, whether the range was ascending or descending. With
this patch, the smallest revision in a range is always shown.
Updated tests for ascending and descending revision ranges.
Signed-off-by: David D Kilzer <ddkilzer@kilzer.net>
Acked-by: Eric Wong <normalperson@yhbt.net>
Fixed typo in Git::SVN::Log::git_svn_log_cmd(). Previously a command like
"git-svn log -r1:4" would only show a commit log separator.
Added tests for ascending and descending revision ranges.
Signed-off-by: David D Kilzer <ddkilzer@kilzer.net>
Acked-by: Eric Wong <normalperson@yhbt.net>
When doing dcommit git-svn must use subversion's config or newly created
files will not include svn's properties
(defined in [auto-props] with 'enable-auto-props = yes').
Signed-off-by: Konstantin V. Arkhipov <voxus@onphp.org>
Acked-by: Eric Wong <normalperson@yhbt.net>
SVN requires that paths be URI-escaped for HTTP(S) repositories.
file:// and svn:// repositories do not need these rules.
Additionally, accessing individual paths inside repositories
(check_path() and get_log() do NOT require escapes to function
and in fact it breaks things).
Noticed-by: Michael J. Cohen <mjc@cruiseplanners.com>
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
for-each-ref: fix off by one read.
git-branch: remove mention of non-existent '-b' option
git-svn: prevent dcommitting if the index is dirty.
Fix memory leak in traverse_commit_list
dcommit uses rebase to sync the history with what has just been pushed to
SVN. Trying to dcommit with a dirty index is troublesome for rebase, so now
the user will get an error message if he attempts to dcommit with a dirty
index.
Signed-off-by: Benoit Sigoure <tsuna@lrde.epita.fr>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Remove a couple of duplicated include
grep with unmerged index
git-daemon: fix remote port number in log entry
git-svn: t9114: verify merge commit message in test
git-svn: fix dcommit clobbering when committing a series of diffs
Our revision number sent to SVN is set to the last revision we
committed if we've made any previous commits in a dcommit
invocation.
Although our SVN Editor code uses the delta of two (old) trees
to generate information to send upstream, it'll still send
complete resultant files upstream; even if the tree they're
based against is out-of-date.
The combination of sending a file that does not include the
latest changes, but set with a revision number of a commit we
just made will cause SVN to accept the resultant file even if it
was generated against an old tree.
More trouble was caused when fixing this because we were
rebasing uncessarily at times. We used git-diff-tree to check
the imported SVN revision against our HEAD, not the last tree we
committed to SVN. The unnecessary rebasing caused merge commits
upstream to SVN to fail.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git svn <cmd> --help" gave options in the order they were found in a
Perl hash, which meant "randomly" to humans.
Signed-off-by: Benoit Sigoure <tsuna@lrde.epita.fr>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* git-svn.perl (&fatal): Append the newline at the end of the error
message.
Adjust all callers.
Signed-off-by: Benoit Sigoure <tsuna@lrde.epita.fr>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
This allows one to easily retrieve a list of svn properties from within
git-svn without requiring svn or knowing the URL of a repository.
* git-svn.perl (%cmd): Add the command `proplist'.
(&cmd_proplist): New.
* t/t9101-git-svn-props.sh: Test git svn proplist.
Signed-off-by: Benoit Sigoure <tsuna@lrde.epita.fr>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
This allows one to easily retrieve a single SVN property from within
git-svn without requiring svn or remembering the URL of a repository
* git-svn.perl (%cmd): Add the new command `propget'.
($cmd_dir_prefix): New global.
(&get_svnprops): New helper.
(&cmd_propget): New. Use &get_svnprops.
* t/t9101-git-svn-props.sh: Add a test case for propget.
[ew: make sure the rev-parse --show-prefix call doesn't break
the `git-svn clone' command]
Signed-off-by: Benoit Sigoure <tsuna@lrde.epita.fr>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
git svn create-ignore (to create one .gitignore per directory
from the svn:ignore properties. This has the disadvantage of
committing the .gitignore during the next dcommit, but when you
import a repo with tons of ignores (>1000), using git svn show-ignore
to build .git/info/exclude is *not* a good idea, because things like
git-status will end up doing >1000 fnmatch *per file* in the repo,
which leads to git-status taking more than 4s on my Core2Duo 2Ghz 2G
RAM)
* git-svn.perl (%cmd): Add the new command `create-ignore'.
(&cmd_create_ignore): New.
* t/t9101-git-svn-props.sh: Adjust the test-case for show-ignore and
add a test case for create-ignore.
[ew: added commit message from
<05CAB148-56ED-4FF1-8AAB-4BA2A0B70C2C@lrde.epita.fr> ]
Signed-off-by: Benoit Sigoure <tsuna@lrde.epita.fr>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
* git-svn.perl (&traverse_ignore): Remove.
(&prop_walk): New.
(&cmd_show_ignore): Use prop_walk.
[ew: This will ease the implementation of the `create-ignore',
`propget', and `proplist' commands]
Signed-off-by: Benoit Sigoure <tsuna@lrde.epita.fr>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Some variables coming from the Subversion's Perl bindings are used
in our code only once, so the interpreter warns us about it. These
warnings are false-positives, because the variables themselves are
initialized in the binding's guts, that are made by SWIG.
Credits to Sam Vilain for his note about "no warnings 'once'".
[ew: minor formatting change]
Signed-off-by: Eygene Ryabinkin <rea-git@codelabs.ru>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Parameters 'store-passwords' and 'store-auth-creds' from Subversion's
configuration (~/.subversion/config) were not respected. This was
fixed: the default values for these parameters are set to 'yes' to
follow Subversion behaviour.
Signed-off-by: Eygene Ryabinkin <rea-git@codelabs.ru>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
In most cases of branching, the tree is copied unmodified from the trunk
to the branch. When that is done, we can simply start with the parent's
index and apply the changes on the branch as usual.
[ew: rewritten from Steven's original to use SVN::Client instead
of the command-line svn client.
Since SVN::Client connects separately, we'll share our
authentication providers array between our usages of
SVN::Client and SVN::Ra, too. Bypassing the high-level
SVN::Client library can avoid this, but the code will be
much more complex. Regardless, any implementation of this
seems to require restarting a connection to the remote
server.
Also of note is that SVN 1.4 and later allows a more
efficient diff_summary to be done instead of a full diff,
but since this code is only to support SVN < 1.4.4, we'll
ignore it for now.]
Signed-off-by: Steven Walter <stevenrwalter@gmail.com>
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
git-svn: don't attempt to spawn pager if we don't want one
Supplant the "while case ... break ;; esac" idiom
User Manual: add a chapter for submodules
user-manual: don't assume refs are stored under .git/refs
Detect exec bit in more cases.
Conjugate "search" correctly in the git-prune-packed man page.
Move the paragraph specifying where the .idx and .pack files should be
Documentation/git-lost-found.txt: drop unnecessarily duplicated name.
Even though config_pager() unset the $pager variable, we were
blindly calling exec() on it through run_pager().
Noticed-by: Chris Moore <christopher.ian.moore@gmail.com>
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the rev-list --parents functionality to read the parents
of the commit. cat-file only shows the raw object with the
original parents and doesn't take into account grafts; so
we'll rely on rev-list machinery for the smarts here.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We have a workaround for the reparent function not working
correctly on the SVN native protocol servers. This workaround
opens a new connection (SVN::Ra object) to the new
URL/directory.
Since libsvn appears limited to only supporting one connection
at a time, this workaround invalidates the Git::SVN::Ra object
that is $self inside gs_fetch_loop_common(). So we need to
restart that connection once all the fetching is done for each
loop iteration to be able to run get_log() successfully.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This makes git-svn unconditionally invoke git-log with --first-parent when
it is trying to discover its upstream subversion branch and collecting the
commit ids which should be pushed to it with dcommit. The reason for always
using --first-parent is to make git-svn behave in a predictable way when the
ancestry chain contains merges with other git-svn branches.
Since git-svn now always uses 'git-log --first-parent' there is no longer
any need for the --first-parent option to git-svn, so this is removed.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When git-svn uses git-log to find embedded 'git-svn-id'-lines in commit
messages, it can get confused when local history contains merges with
other git-svn branches. But if --first-parent is supplied to git-log,
working_head_info() will only see 'branch-local' commits and thus the
first commit containing a 'git-svn-id' line should refer to the correct
subversion branch.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Although dcommit could detect if the first commit in the series
would conflict with the HEAD revision in SVN, it could not
detect conflicts in further commits it made.
Now we rebase each uncommitted change after each revision is
committed to SVN to ensure that we are up-to-date. git-rebase
will bail out on conflict errors if our next change cannot be
applied and committed to SVN cleanly, preventing accidental
clobbering of changes on the SVN-side.
--no-rebase users will have trouble with this, and are thus
warned if they are committing more than one commit. Fixing this
for (hopefully uncommon) --no-rebase users would be more complex
and will probably happen at a later date.
Thanks to David Watson for finding this and the original test.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the configuration of the user has "diff.color = true", the
output from "log" we invoke internally added color codes, which
broke the parser.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Tested-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Acked-by: Eric Wong <normalperson@yhbt.net>
The --stdlayout option to git-svn init/clone initialises the default
Subversion values of trunk,tags,branches: -T trunk -b branches -t tags.
If any of the -T/-t/-b options are given in addition, they are given
preference.
[ew: fixed whitespace and added "-s" shortcut]
Signed-off-by: martin f. krafft <madduck@madduck.net>
Signed-off-by: Eric Wong <normalperson@yhbt.net>
This will print out the URL that dcommit will operate on.
If used with --dry-run this will print out the URL without
making changes to the repository.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Running git-svn log <ref> -r<rev> against a <ref> other than the
current HEAD did not work if the <rev> was exclusive to the
other branch.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In git some characters are invalid as documented
in git-check-ref-format. In subversion these characters might
be valid, so a translation is required.
This patch does this translation by url escaping characters, that
are not allowed.
Credit goes to Eric Wong, martin f. krafft and Jan Hudec
Signed-off-by: Robert Ewald <robewald@gmx.net>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Changed filter for username in svn-authors file, so even 'user name' is accepted.
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Renaming files with non-URI friendly characters caused
breakage when committing to DAV repositories (over http(s)).
Even if I try leaving out the $self->{url} from the return value
of url_path(), a partial (without host), unescaped path name
does not work.
Filenames for DAV repos need to be URI-encoded before being
passed to the library. Since this bug did not affect file://
and svn:// repos, the git-svn test library needed to be expanded
to include support for starting Apache with mod_dav_svn enabled.
This new test is not enabled by default, but can be enabled by
setting SVN_HTTPD_PORT to any available TCP/IP port on
127.0.0.1.
Additionally, for running this test, the following variables
(with defaults shown) can be changed for the suitable system.
The default values are set for Debian systems:
SVN_HTTPD_MODULE_PATH=/usr/lib/apache2/modules
SVN_HTTPD_PATH=/usr/sbin/apache2
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We were previously sensitive to leading slashes in the fetch
lines and incorrectly writing them to the config if the user
used them (needlessly) in the command-line.
This fixes the issue and allows us to play nicely with legacy
configs that have leading slashes in fetch lines.
Thanks to Bradford Smith for figuring this out for me:
>
> This works:
>
> git-svn clone https://my.server.net/repos/path/ -Ttrunk/testing
> -ttags/testing -bbranches/testing testing
>
> This doesn't:
>
> git-svn clone https://my.server.net/repos/path -T/trunk/testing
> -t/tags/testing -b/branches/testing testing
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We now explicitly disconnect before starting new SVN::Ra
connections. SVN::Ra objects will automatically be disconnected
from the server on DESTROY.
SVN servers seem to have problems accepting multiple connections
from one client, and the SVN library has trouble being connected
to multiple servers at once. This appears to cause opening the
second connection to block, and cause git-svn to be unusable
after using the do_switch() function.
git-svn opens another connection because a workaround is
necesary for the buggy reparent function handling on certain
versions of svn:// and svn+ssh:// servers. Instead of using the
reparent function (analogous to chdir), it will reopen a new
connection to a different URL on the SVN server.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ei/worktree+filter:
filter-branch: always export GIT_DIR if it is set
setup_git_directory: fix segfault if repository is found in cwd
test GIT_WORK_TREE
extend rev-parse test for --is-inside-work-tree
Use new semantics of is_bare/inside_git_dir/inside_work_tree
introduce GIT_WORK_TREE to specify the work tree
test git rev-parse
rev-parse: introduce --is-bare-repository
rev-parse: document --is-inside-git-dir
Cache the maximum revision for each rev_db URL rather than looking it
up each time. This saves a lot of time when rebuilding indexes on a
freshly cloned repository.
Signed-off-by: Sam Vilain <sam.vilain@catalyst.net.nz>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This saves a bit of time when rebuilding the git-svn index.
Signed-off-by: Sam Vilain <sam.vilain@catalyst.net.nz>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, whenever svn repository http server requests client
certificate, prompt provider is invoked, ignoring any
ssl-client-cert-file settings in ~/.subversion/servers.
Moreover, it happens more than once per session, which is quite
irritating.
Signed-off-by: Michael Krelin <hacker@klever.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
You don't need to use string eval to define new functions; assigning a
code reference to the target symbol table is enough.
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
dcommit will still rewrite the HEAD commit and the history of the first
parents of each HEAD~1, HEAD~2, HEAD~3 as it always has.
However, any merge parents (HEAD^2, HEAD^^2, HEAD~2^2) will now be
preserved when the new HEAD and HEAD~[0-9]+ commits are rewritten to SVN
with dcommit. Commits written to SVN will still not have any merge
information besides anything in the commit message.
Thanks to Joakim Tjernlund, Junio C Hamano and Steven Grimm
for explanations, feedback, examples and test case.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Also, this fixes a bug where in an odd case a remote named
"config" could get renamed to ".metadata".
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
I hadn't looked at this code in a while and had to read this
again to figure out what it did. To avoid having to do this
again in the future, I just gave gave the hunk a descriptive
name.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Up to now to check for a working tree this was used:
!is_bare && !inside_git_dir
(the check for bare is redundant because is_inside_git_dir
returned already 1 for bare repositories).
Now the check is:
inside_work_tree && !inside_git_dir
Signed-off-by: Matthias Lederhofer <matled@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There's no point in calculating an MD5 if we're not going to use
it. We'll also avoid the possibility of there being a bug in the
Perl MD5 library not being able to handle zero-sized files.
This is a followup to 20b3d206ac,
which allows us to track repositories that do not provide MD5
checksums.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
I didn't have a chance to test the off-by-default minimize-url
stuff enough before, but it's quite broken for people passing
the --trunk/-T, --tags/-t, --branches/-b switches to "init" or
"clone" commands.
Additionally, follow-parent functionality seems broken when we're
not connected to the root of the repository.
Default behavior for "traditional" git-svn users who only track
one directory (without needing follow-parent) should be
reasonable, as those users started using things before
minimize-url functionality existed.
Behavior for users more used to the git-svnimport-like command
line will also benefit from a more-flexible command-line than
svnimport given the assumption they're working with
non-restrictive read permissions on the repository.
I hope to properly fix these bugs when I get a chance to in the
next week or so, but I would like to get this stopgap measure of
reverting to the old behavior as soon as possible.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
When sorting directory names by depth (slash ("/") count) and
closing the deepest directories first (as the protocol
requires), we failed to put the root baton (with an empty string
as its key "") after top-level directories (which did not have
any slashes).
This resulted in svnserve being in a situation it couldn't
handle and caused a segmentation fault on the remote server.
This bug did not affect users of DAV and filesystem repositories.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Confirmed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <junkio@cox.net>
For tracking branches and tags, git-svn prefers to connect
to the root of the repository or at least the level that
houses branches and tags as well as trunk. However, users
that are accustomed to tracking a single directory have
no use for this feature.
As pointed out by Junio, users may not have permissions to
connect to connect to a higher-level path in the repository.
While the current minimize_url() function detects lack of
permissions to certain paths _after_ successful logins, it
cannot effectively determine if it is trying to access a
login-only portion of a repo when the user expects to
connect to a part where anonymous access is allowed.
For people used to the git-svnimport switches of
--trunk, --tags, --branches, they'll already pass the
repository root (or root+subdirectory), so minimize URL
isn't of too much use to them, either.
For people *not* used to git-svnimport, git-svn also
supports:
git svn init --minimize-url \
--trunk http://repository-root/foo/trunk \
--branches http://repository-root/foo/branches \
--tags http://repository-root/foo/tags
And this is where the new --minimize-url command-line switch
comes in to allow for this behavior to continue working.
Some parts of SVN always seem to use it, even if the SVN::Ra
object we're using is no longer used and we've created a new one
in its place. It's also true that only one SVN::Ra connection
can exist at once... Using SVN::Pool->new_default when the
SVN::Ra object is created doesn't seem to help very much,
either...
Hopefully this fixes all segfault problems users have been
experiencing over the past few months.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
This patch was originally intended to make the Perl GC more
sensitive to the SVN::Pool objects and not accidentally clean
them up when they shouldn't be (causing segfaults). That didn't
work, but this patch makes the code a bit cleaner regardless
Put our caches for get_dir and check_path calls directly into
the SVN::Ra object so they auto-expire when it is destroyed.
dirents returned by get_dir() no longer needs the pool object
stored persistently along with the cache data, as they'll be
converted to native Perl hash references.
Since calling rev_proplist repeatedly per-revision is no longer
needed in git-svn, we do not cache calls to it.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
We no longer store usernames in URLs stored in git-svn-id lines
for dcommit, so we shouldn't rely on those URLs when connecting
to the remote repository to commit.
git-svn dcommit exports commits to Subversion, then imports them back
to git again, and last but not least rebases or resets HEAD to the
last of the new commits. I guess this rebasing is convenient when
using just git, but when the commits to be exported are managed by
StGIT, it's really annoying. So add an option to disable this
behavior. And document it, too!
Signed-off-by: Karl Hasselström <kha@treskal.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This patch adds a new 'find-rev' command to git-svn that lets you easily
translate between SVN revision numbers and git tree-ish.
Signed-off-by: Adam Roben <aroben@apple.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
After reading the leading contents from a symlink data obtained
from subversion, which we expect to begin with 'link ', the code
forked to hash the remainder (which should match readlink()
result) using git-hash-objects, by redirecting its STDIN from
the filehandle we read that 'link ' from. This was Ok with Perl
on modern Linux, but on Mac OS, the read in the parent process
slurped more than we asked for in stdio buffer, and the child
did not correctly see the "remainder".
This attempts to fix the issue by using lower level sysseek and
sysread instead of seek and read to bypass the stdio buffer.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Acked-by: Eric Wong <normalperson@yhbt.net>
Acked-by: Seth Falcon <sethfalcon@gmail.com>
This patch adds a new 'find-rev' command to git-svn that lets you easily
translate between SVN revision numbers and git tree-ish.
Signed-off-by: Adam Roben <aroben@apple.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Usernames don't matter for the purposes of find_by_url, so always remove them
before doing any comparisons.
Signed-off-by: Adam Roben <aroben@apple.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Many functions and operators in perl set $_, so its value cannot be relied upon
after calling arbitrary functions. The solution is simply to copy the value of
$_ into a local variable that will not get overwritten.
Signed-off-by: Adam Roben <aroben@apple.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Sam Vilain <sam.vilain@catalyst.net.nz>
Signed-off-by: Adam Roben <aroben@apple.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
git only tracks the histories of full directories, not
that of individual files. Sometimes, SVN users will
place[1] a regular file in the directory designated
for subdirectories of branches or tags.
Thanks to jrockway on #git for pointing this out.
[1] mistakenly or otherwise, such as a README
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
These are harmless but annoying. They were introduced in
512b620bd9
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
When an explicit --revision argument is specified, do not fetch
past the specified range into the beginning of history.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This bug has been around since the the conversion to use the
Git.pm library back in October or November. Eventually I'd like
"git rev-list/log" to have the option to not truncate overly
long messages.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
When patches are merged from another git-svn managed branch,
they will have the git-svn-id: metadata line in them (generated
by git-format-patch).
When doing rebase or dcommit via git-svn, this would cause
git-svn to find the wrong upstream branch. We now verify
that the commit is consistent with the value in the .rev_db
file.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
"git svn log" is the only command that needs the pass-through
option in Getopt::Long; otherwise we will bail out and let the
user know something is wrong.
Also, avoid printing out unaccepted mixed-case options (that
are reserved for the command-line) such as --useSvmProps
in the usage() function.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
If we're on an invalid HEAD, we should detect this and avoid
attempting to continue.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
We ignore errors if the path we're tracking did not exist for
a particular revision range, but we still print out warnings
telling the user about that.
As pointed out by Seth Falcon, this amounts to a lot of warnings
that could confuse and worry users. I'm not entirely comfortable
completely silencing the warnings, but showing one warning per
path that we track should be reasonable.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This should fix fetching for people who did not use
"git svn --minimize" or cannot connect to the repository root
due to the lack of permissions.
I'm not sure what I was on when I made the change to the
rel_path() function in 4e9f6cc78e
that made it die() when we weren't connected to the repository
root :x
Thanks to Sven Verdoolaege for reporting this bug.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This avoids fetching new revisions remotely, and is usefuly
versus plain "git rebase" because the user does not have to
specify which remote head to rebase against.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
When using do_switch:
We only need to ensure the index is clean and set to that of the
parent tree) we rely on being able to reconstruct full files
with deltas transferred over the network.
When using do_update:
We may safely unlink the index if we are fetching an entire
new tree with do_update. Having an old index (from a
previously deleted/abandoned directory) around can cause
irrelevant files to be mistakenly kept.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Clearing the pool of the previous SVN::Ra connection we have
seems to to fix mysterious connection dropping errors when
reconnecting to different paths of svn:// repositories hosted by
rubyforge.org.
Note: I'm not sure *why* this fixes things things,
but it does for me.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Several bugs caused this to fail:
* GIT_DIR was set incorrectly after entering the target directory
* Avoid double chdir-ing when clone is called with an explicit path
* create target subdirectory *before* running git-init when using
the multi-init path
Signed-off-by: Eric Wong <normalperson@yhbt.net>
http://foo@blah.com/path is the same as http://blah.com/path, so
remove usernames from URLs before storing them in commits, and when
reading them from commits.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
If we are run inside a subdirectory of a working tree, we'll
chdir to the top first before touching anything. This also
prevents the accidental creation of .git directories inside
subdirectories since they need metadata.
Noticed by maio on #git
Signed-off-by: Eric Wong <normalperson@yhbt.net>
This allows the user to run git-svn show-ignore on there
current HEAD without needing to remember which branch/ref they
branched from with -i. Also, find_by_url should correctly
handle cases where the URL passed to it is not valid.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Since the options that affect the way metadata is handled in
git-svn, should be consistently set/unset throughout history
imported by git-svn; it makes sense to allow the user to set
certain options from the command-line that will write to the
config file when initially creating the repository.
Also, fix some formatting issues while we're updating
documentation.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
svm:mirror is not useful at all for us. Parts of the old unit
test were broken and based on my misunderstanding of the
svm:mirror property.
When we read svm:source; make sure we correctly handle the '!'
in it: it is used to separate the path of the repository root
from the virtual path within the repository. We don't need
to make that distinction, honestly!
We also ensure that subdirectories are also mirrored with the
correct URL if we're using useSvmProps.
We have a new test that uses dumped repo that was really
created using SVN::Mirror to avoid ambiguities and
mis-understandings about the svm: properties.
Note: trailing whitespace in the svm.dump file is unfortunately
a reality and required by SVN; so please ignore it when applying
this patch.
Also, ensure that the -R/--remote/--svn-remote flag is always
in effect if explicitly passed via the command-line. This
allows us to track logically different mirrors sharing the
same URL (probably common with SVN::Mirror/SVK users).
Signed-off-by: Eric Wong <normalperson@yhbt.net>
This is similar to useSvmProps, but far simpler in
implementation because svnsync retains a 1:1
between revision numbers and relative paths within
the repository
Config keys: svn.useSvnsyncProps
svn-remote.<repo>.useSvnsyncProps
Signed-off-by: Eric Wong <normalperson@yhbt.net>
This feature allows users to create repositories from alternate
URLs. For example, an administrator could run git-svn on the
server locally (accessing via file://) but wish to distribute
the repository with a public http:// or svn:// URL in the
metadata so users of it will see the public URL.
Config key: svn-remote.<remote>.rewriteRoot
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Having it named as 'config' prevents us from tracking a
ref named 'config', which is a huge mistake.
On the non-technical side, the word 'config' implies that
a user can freely modify it; but that's not the case
here.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
* Fixed logic for renaming old .rev_db -> .rev_db.$uuid
* correctly handle manual migrations for those who decide to
start use globbing to handle branches/tags over individual
'fetch' keys
Signed-off-by: Eric Wong <normalperson@yhbt.net>
This works similarly to 'svn update' or 'git pull' except that
it preserves linear history with 'git rebase' instead of 'git
merge' for ease of dcommit-ing with git-svn.
While we're at it, put the working_head_info() logic
into its own function and allow --fetch-all/--all for
dcommit and rebase (which will fetch all refs in the
current [svn-remote] instead of just the working one).
Note that the '-a' switch (short for --fetch-all/--all) has been
removed as it conflicts with the non-svn 'git fetch'
Signed-off-by: Eric Wong <normalperson@yhbt.net>
On newly-created repositories, 'refs/heads/master' does not
point to anything. This can be confusing to new users; so we
update 'master' to point to the last imported ref after fetching
is done.
Once 'master' is valid; we assume HEAD points to it; and if
the repository is not bare, then checkout the files if the
working tree is clean and unused.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Force the showing of the --minimize flag as an option in the
'migrate' help.
Also, fix the usage function to correctly filter out
the deprecated aliases.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
This allows users to use SVM (SVN::Mirror) to mirror a remote
repository to use dcommit to commit to the repository that SVM
was mirroring. When dcommit is used in this manner, the automatic
fetch + rebase/reset does not happen; in which case the user will
have to manually invoke svm/svk, run 'git svn fetch', and finally
'git rebase'.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
The newer default value should should lower memory usage for
large fetches and also help with fetching from less reliable
servers. Previously the value was 1000 and memory usage
got a bit high on some repositories and fetching became
less reliable in some cases.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Also, some changes to avoid creating dead dirs under
.git/svn/. We now create all directories as late as
possible.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
* avoid skipping modification-only changes in fetch
* correctly fetch when we only have branches and tags
to glob from (no fetch keys defined)
Signed-off-by: Eric Wong <normalperson@yhbt.net>
multi-init is now just an alias that requires -T/-t/-b;
all options that 'init' can now accept.
This will hopefully simplify usage and reduce typing.
Also, allow the --shared option in 'init' to take an optional
argument now that 'git-init --shared' supports an optional
argument.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
multi-fetch is deprecated, "fetch -a" is easier to type
By default, fetch will fetch everything from its default
[svn-remote]; if fetch [--all|-a] is specified, then it will
fetch from all svn remotes. Refspecs on the command-line
(like git-fetch) are not supported.
Also, enable -r/--revision arguments for fetch so
users can shoot themselves in the foot^W^W^W^W^W
skip some history and do the equivalent of a shallow
clone/fetch they're not interested in.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Similar in spirit to the recent dcommit change, we now
look at 'HEAD' by default to look for a GIT_SVN_ID
so the user won't have to pass -i <GIT_SVN_ID> argument.
We are also more tolerant of of people passing bare remote names
as a result (just $GIT_SVN_ID without the -i)
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Merge commits can be created when following certain parents,
(most notably 'R' cases) and we definitely don't want to exclude
them.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
* dcommit no longer requires the correct -i/GIT_SVN_ID option
passed to it. Since you're committing from HEAD (or another
commit that is a parent of HEAD), you'll be able to find
a commit with metadata information containing the SVN URL
that your HEAD was descended from anyways.
* I don't think dcommit ever worked for people using the
noMetadata option; so I don't think relying on metadata
is an issue.
* useSvmProps users shouldn't commit to SVN::Mirror created
repositories anyways, right?
* Users of globbing should automatically be able to commit
to paths that are not explicitly set in .git/config
Signed-off-by: Eric Wong <normalperson@yhbt.net>
multi-init did not write a svn-remote.<remote>.url config
entry without a --trunk argument.
Also, The svm:mirror property is used by SVN::Mirror to track
the path of the repository that we are mirroring. We need to
append that to the source (which is (presumably) just the URL of
the repository root).
Lastly, we now look harder for svm:(source|mirror|uuid) properties
in sub and parent directories. Since our relative path could
be tweaked.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Even if nothing touched paths we care about in a fetch;
increment the maxRev like we do with rev_db since
we don't like having to run get_log on revisions we've
seen before.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
We need a separate .rev_db file for each repository we're
tracking. This allows us to track the same logical path off
multiple mirrors. We preserve a symlink to the old .rev_db
(no-UUID) if we're (auto-)migrating from an old version to
preserve backwards compatibility.
Also, get rid of the uuid() wrapper since we cache UUID in our
private config, and the SVN::Ra::get_uuid() function memoizes
the return value per-connection.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Make sure we flush our userspace buffers and and fsync(2)
.rev_db information to disk if we use these options because
we really don't want to lose this information.
Also, disallow --use-svm-props and --no-metadata from the
command-line because history will be inconsistent if they're
only used occasionally. If a user wants to use these options,
they must be set in the config so they're always on.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Available options are currently:
svn-remote.<remote>.{noMetadata,useSvmProps,followParent}
These boolean switches will override options set globally in
[svn], and even override options set on the command-line (this
should probably change in the future, however).
Note that the noMetadata and useSvmProps options conflict. It's
both technically and logically impossible to use them together.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Pass --use-svm-props or set the svn.usesvmprops key with git-config
to enable using properties set by SVN::Mirror when it mirrored the
upstream URL.
This is heavily based on work from Sam Vilain:
> From: Sam Vilain <sam@vilain.net>
> Date: Sun, 11 Feb 2007 12:34:45 +1300
> Subject: [PATCH] git-svn: re-map repository URLs and UUIDs on SVK mirror paths
>
> If an SVN revision has a property, "svm:headrev", it is likely that
> the revision was created by SVN::Mirror (a part of SVK). The property
> contains a repository UUID and a revision. We want to make it look
> like we are mirroring the original URL, so introduce a helper function
> that returns the original identity URL and UUID, and use it when
> generating commit messages.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
I may resurrect it for dcommit at some point, but nobody really
uses set-tree anymore and I don't feel like introducing more
complexity into the code at this point.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Several bugs were found and fixed while getting this to work:
* Remember the 'R'(eplace) case of actions and treat it like we
would an 'A'(dd) case.
* Fix a small case of follow-parent missing a parent if a
subdirectory was modified in the revision where the parent was
copied.
* dirents returned by get_dir sometimes expire if the data
structure is too big and the pool is destroyed, so we
cache get_dir (along with check_path and get_revprops)
temporarily along with its pool.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
I incorrectly used $path/? and $path/* to strip off leading
directories, but places where $path = 'branches/0.17' would
incorrectly strip changes to 'branches/0.17.1' as well.
For globs, we require that our '*' is its own path component
(surrounded by '/' or nothing). Enforce this when --prefix= is
passed to us, too.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
--no-follow-parent disables and reverts it back to the old
default behavior of not following parents (if you don't care for
full history).
Signed-off-by: Eric Wong <normalperson@yhbt.net>
We don't need them anymore, all the rough points of
the --follow-parent implementation have been worked out.
The only improvement in the future will probably be
--follow-parent-harder, which will track subdirectories and
follow individual file history (so annotate/blame can be
complete); but that is still a ways off.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
These checks were needed before git-svn got smarter about
match_paths() and using path information returned by get_log().
We also have extra checking against fetching revisions
out-of-order these days; so we don't have to worry about that as
much. We also check for tree deletions in match_paths() and
skip those as well.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
We can have a branch that was deleted, then re-added under the
same name but copied from another path, in which case we'll have
multiple parents (we don't want to break the original ref, nor
lose copypath info).
Add a test for this, too, of course.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
This is similar to the way git proper handles refs, except we
use the keys 'branches' and 'tags' to distinguish when we want
to use wildcards.
The left-hand side of the ':' contains the remote path, and must
have one asterisk ('*') in it for the branch name. The asterisk
may be in any component of the path as long as is it on its own
directory level.
The right-hand side contains the refname and must have the
asterisk as the last path component.
branches = branches/*:refs/remotes/*
tags = tags/*:refs/remotes/tags/*
Signed-off-by: Eric Wong <normalperson@yhbt.net>
This is an optimization that should conserve network
bandwidth on certain repositories and configurations.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
It can be confusing and redundant, since historically the
default remote ref (not remote itself) has been "git-svn", too.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Since fetch_loop_common starts from the lowest revision number
in a group of Git::SVN objects; we want to avoid refetching
get_log for current users for things we've already cut it.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
This was originally needed before we used the delta fetcher and
had a less-clean follow-parent implementation that could leave
holes in the history.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
It looks better (like [remote "origin"]) instead of whatever
refname came up first in our directory traversal. Of course
--remote= overrides this.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Having 'fetch' entries in the config file created from
--follow-parent is wasteful because it can cause *future* of
invocations to follow revisions we were never interested in
in the first place.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Using buffered IO for reading 40-41 bytes at a time isn't very
efficient. Buffering writes for a short duration is alright
since we close() right away and buffers will be flushed.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Prefill .rev_db to the maximum revision we tried to fetch;
and take advantage of that so we can avoid using get_log()
on ranges we've already seen (and have deemed uninteresting).
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Defer any signals that cause termination while they are
updating; and put the update-ref call as close to the rename()
as possible. Also, make things extra-safe (but slower) for
people using --no-metadata since they can't rely on .rev_db
being rebuilt if it's clobbered (well, I'm calling update-ref
with the -m flag for reflogs, we don't yet have a way to rebuild
.rev_db from reflogs.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Passing very large strings as arguments is bad for memory usage
as it never seems to get freed in Perl. The .rev_db format is
already not optimized for projects with sparse history.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
get_log with explicit paths is the safest way to get revisions
that change a particular path we're interested in.
Unfortunately that means we still have to run get_log multiple
times for each path we're interested in, and even more if
a path gets deleted.
The first argument of get_log() is an array reference, but we
shouldn't use more than one element in that array ref because
the non-existence of _one_ of those paths for a particular range
would cause an error for all paths in that range, so yes, we
need multiple get_log calls to be on the safe side...
Signed-off-by: Eric Wong <normalperson@yhbt.net>
--svn-remote allows the default remote name to be overridden (useful
for tracking multiple SVN repositories).
Signed-off-by: Eric Wong <normalperson@yhbt.net>
We no longer delete the top-level directory even if it got
deleted from the upstream repository. In gs_do_update; we
double-check that the path we're tracking exists at both
endpoints before proceeding. We have also added additional
protection against fetching revisions out-of-order.
To simplify our internal interfaces, I've disabled passing the
'recursive' flag to the gs_do_{switch,update} wrapper functions
since we always want it in git-svn. We also pass the
entire Git::SVN object rather than just the path because it
helped me debug.
When printing progress, the refname is printed out to make
it less confusing when multi-fetch is running.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Since refs/remotes/* are not automatically cloned, we expect the
user to be capable of copying those references themselves
anyways.
Also removed the documentation for --ignore-nodate while we're
at it; it has also been made automatic.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
We were still skipping path information from get_log if we are
tracking /r9270/drunk/subversion/bindings/..., but got something
like this in the log:
A /r9270/drunk (from /r9270/trunk:14)
Signed-off-by: Eric Wong <normalperson@yhbt.net>
I can't seem to figure out what I or the SVN libraries are doing
wrong, but it appears to be related to reparent and probably
some global structure that gets reset if multiple SVN
connections are being used.
So now, in order to use do_switch; we'll open a new connection
to the repository with the complete URL; but we can't seem to
ever use an existing Ra object after another one has been
created...
Signed-off-by: Eric Wong <normalperson@yhbt.net>
We don't need our own error handler for other operations. Also
add a message about the successfully do_switch or do_update in
follow-parent for debugging do_switch failures with svn:// and
svn+ssh:// connections.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Historically, git-svn did not always use Digest::MD5 because
it did not use the SVN::Delta::Editor interfaces. Nowadays
it does, and the requires make strace more noisy.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Using path names as refnames breaks horribly if a user is
tracking one large, toplevel directory, and a lower-level
directory is followed from another project is a parent
of another ref, as it will cause refnames such as:
'refs/remotes/trunk/path/to/stuff', which will conflict
with a refname of 'refs/remotes/trunk'.
Now we just append @$revno to the end of it the current
refname. And if we have followed back to a grandparent, then
we'll strip any existing '@$parent_revno' strings before
appending our own '@$revno' string to it.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
The do_update or do_switch functions in SVN only allow for a
single path component; so 'path/to/deep/dir' would be
interpreted as 'path'.
SVN 1.4.x has a reparent function that can let us change the
session to use a higher-level root of the repository, so we can
use that for do_switch (which still doesn't seem to work in SVN
1.4.3 (a fix was attempted, but they missed the rest of the
typemap changes needed in trunk...)).
On the do_update side, we can use set_path on higher level
directories and set them to a newer revision so they don't get
updated. We can't do this with do_switch, either, because the
relative path we're tracking can change (directory moving into
a child of itself).
Because of these changes, we need to double check that our Fetch
editor is correctly performing stripping on any prefixed paths
from update, otherwise we'll just die() because that would be
a bug.
Added a test case which helped me notice and fix problems with
do_switch, too.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Also, this should allow for the tracking of new, but empty
directories where we would want to see the log message.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Since single fetching is a special case of multi-fetch,
share code with it and the fetch loop into Git::SVN::Ra
since it uses a single Ra connection and multiple
Git::SVN objects.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Before, we needed a separate svn_ra instance to run
our check_path calls once the editor was active; but
we can avoid that by running all the check_path calls
before our editor is active.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
I broke this part with the URL minimization; since
git-svn will now try to connect to the root of
the repository and will end up writing files
there if it can...
Signed-off-by: Eric Wong <normalperson@yhbt.net>
svn_log_changed_path_t structs were being used out of scope
outside of svn_ra_get_log (because I wanted to eventually be
able to use git-svn with only a single connection to the
repository). So now we dup them into a hash.
This was fixed while making --follow-parent fetches more
efficient. I've moved parsing of the command-line --revision
argument outside of the Git::SVN module so Git::SVN::fetch() can
be used in more places (such as find_parent_branch).
Signed-off-by: Eric Wong <normalperson@yhbt.net>
git-svn has never been able to handle deleted branches very well
because svn_ra_get_log() is all-or-nothing, meaning that if the
max revision passed to it does not contain the path we're
tracking, we miss all the revisions in the repository.
Branches fetched using --follow-parent still do this
sub-optimally (will be fixed soon). --follow-parent will soon
become the default, so we will assume that when using get_log();
We will also avoid tracking revprops for revisions with no
path-related changes since otherwise we just end up pulling
logs to paths we don't care about.
Also added a test for this to t9104-git-svn-follow-parent.sh and
correctly commit the log message in the preceeding test (which
conflicted with a filename).
Signed-off-by: Eric Wong <normalperson@yhbt.net>
They simply aren't interesting to track, and this will allow
us to avoid get_log().
Since r0 is covered by this, we need to update the tests to not
rely on r0 (which is always empty).
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Introducing Git::IndexInfo. This module will probably be useful
outside of git-svn, so I'm not putting it in the Git::SVN
namespace.
This will allow me to more easily avoid the use of get_log() in
the future and simply run do_update in incrementing ranges.
get_log() should be avoided because there are cases where
moved/deleted directories do not track correctly (until
--follow-parent is run on a new branch).
Signed-off-by: Eric Wong <normalperson@yhbt.net>
This means that tracking the path of:
/another-larger/trunk/thunk/bump/thud inside a repository
would follow:
/larger-parent/trunk/thunk/bump/thud
even if the svn log output looks like this:
--------------------------------------------
Changed paths:
A /another-larger (from /larger-parent:5)
--------------------------------------------
Note: the usage of get_log() in git-svn still makes a
an assumption that shouldn't be made with regard to
revisions existing for a particular path.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
This allows connections to be used more efficiently and not require
users to run 'git-svn migrate --minimize' for new repositories.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Tests always ran 'git init' before we ran so that repo-config
would always have something to read. However that does not work
in real-world situations where the user expects 'git svn init'
to work without running 'git init' first.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
It's not really useful anymore now that we have a better
--follow-parent for the valid cases. Any other use
of it is not valid.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Having multiple fetch refspecs pointing to the same local ref
would be a very bad thing. Start avoiding the use of fatal() or
exit() inside the modules so we can libify more easily.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Bugs fixed:
* We didn't allow manually (not using git-svn) init-ed
remotes/fetch refspecs to be used before. It works now
because that's what I did in this test. git-svn init should
offer more control in the future.
* correctly strip paths in the delta editor when using
do_switch().
* Make the -i / GIT_SVN_ID option work correctly when doing
fetch on a multi-ref svn-remote
Signed-off-by: Eric Wong <normalperson@yhbt.net>
--minimize will update the git-svn configuration to attempt to
connect to the repository root (instead of directly to the
path(s) we are tracking) in order to allow more efficient reuse
of connections (for multi-fetch and follow-parent).
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Note: this can cause problems with Perl's reference counting GC,
so I'm disabling Git::SVN::Ra::DESTROY. If we notice more
problems down the line, we can disable this enhancement.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Of course, we handle metadata migrations from previous versions
and we have added unit tests.
The new .git/config remotes resemble non-SVN remotes. Below
is an example with comments:
[svn-remote "git-svn"]
; like non-svn remotes, we have one URL per-remote
url = http://foo.bar.org/svn
; 'fetch' keys are done in the same way as non-svn
; remotes, too. With the left-hand-side of the ':'
; being the remote (SVN) repository path relative to the
; above 'url' key; and the right-hand-side being a
; remote ref in git (refs/remotes/*).
; An empty left-hand-side means that it will fetch
; the entire contents of the 'url' key.
; old-style (migrated from previous versions of git-svn)
; are like this:
fetch = :refs/remotes/git-svn
; this is created by a current version of git-svn
; using the multi-init command with an explicit
; url (specified above). This allows multi-init
; to reuse SVN::Ra connections.
fetch = trunk:refs/remotes/trunk
fetch = branches/a:refs/remotes/a
fetch = branches/b:refs/remotes/b
fetch = tags/0.1:refs/remotes/tags/0.1
fetch = tags/0.2:refs/remotes/tags/0.2
fetch = tags/0.3:refs/remotes/tags/0.3
[svn-remote "alt"]
; this is another old-style remote migrated over
; to the new config format
url = http://foo.bar.org/alt
fetch = :refs/remotes/alt
Signed-off-by: Eric Wong <normalperson@yhbt.net>
It's becoming a maintenance burden. I've never found it
particularly useful myself, nor have I heard much feedback about
it; so I'm assuming it's just as useless to everyone else.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Also, convert all usage of 'log_msg' to 'log_entry' for
consistency's sake
SVN::Git::Editor::apply_diff now drives the rest of the
editor.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
More cleanup to separate out functionality and make things
nicer to hack on.
While we're at it, centralize loading of the authors into
one place and correctly handle '(no author)' cases in
when showing logs after-the-fact; and not just at commit
time.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
If a user specified a seperate URL and --tags/--branches as
a sepearte URL, allow the Ra object (and therefore the connection)
to be reused.
We'll get rid of libsvn_ls_fullurl() since it was only used
in one place.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
I will be using functions from Git.pm in more modules, so I
want to avoid re-importing the long argument list everywhere
it's used.
Also removed an unused command-line switch
(--no-ignore-externals) and some variables.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Force some svn_ra functions to use a temporary pool via wrapper
This cleans up the code a bit by removing explicit instances of
pool allocation and deallocation and providing wrapper functions
that make use of temporary pools.
I've also added an explicit pool usage when creating the commit
editor for commit-diff where get_commit_editor can be called
multiple times with the same pool previously.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
We don't append a space after '--bool', so we can't expect
a regular expression to match the space.
Semi-noticed by Junio C Hamano :)
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This mainly quiets down warnings when running git svn log.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
