* tb/repack-write-midx:
test-read-midx: fix leak of bitmap_index struct
builtin/repack.c: pass `--refs-snapshot` when writing bitmaps
builtin/repack.c: make largest pack preferred
builtin/repack.c: support writing a MIDX while repacking
builtin/repack.c: extract showing progress to a variable
builtin/repack.c: rename variables that deal with non-kept packs
builtin/repack.c: keep track of existing packs unconditionally
midx: preliminary support for `--refs-snapshot`
builtin/multi-pack-index.c: support `--stdin-packs` mode
midx: expose `write_midx_file_only()` publicly
When "git cmd -h" shows more than one line of usage text (e.g.
the cmd subcommand may take sub-sub-command), parse-options API
learned to align these lines, even across i18n/l10n.
* ab/align-parse-options-help:
parse-options: properly align continued usage output
git rev-parse --parseopt tests: add more usagestr tests
send-pack: properly use parse_options() API for usage string
parse-options API users: align usage output in C-strings
Teach "git help -c" into helping the command line completion of
configuration variables.
* ab/help-config-vars:
help: move column config discovery to help.c library
help / completion: make "git help" do the hard work
help tests: test --config-for-completion option & output
help: simplify by moving to OPT_CMDMODE()
help: correct logic error in combining --all and --guides
help: correct logic error in combining --all and --config
help tests: add test for --config output
help: correct usage & behavior of "git help --guides"
help: correct the usage string in -h and documentation
Mostly preliminary clean-up in the hook API.
* ab/config-based-hooks-1:
hook-list.h: add a generated list of hooks, like config-list.h
hook.c users: use "hook_exists()" instead of "find_hook()"
hook.c: add a hook_exists() wrapper and use it in bugreport.c
hook.[ch]: move find_hook() from run-command.c to hook.c
Makefile: remove an out-of-date comment
Makefile: don't perform "mv $@+ $@" dance for $(GENERATED_H)
Makefile: stop hardcoding {command,config}-list.h
Makefile: mark "check" target as .PHONY
Various fixes in code paths that move untracked files away to make room.
* en/removing-untracked-fixes:
Documentation: call out commands that nuke untracked files/directories
Comment important codepaths regarding nuking untracked files/dirs
unpack-trees: avoid nuking untracked dir in way of locally deleted file
unpack-trees: avoid nuking untracked dir in way of unmerged file
Change unpack_trees' 'reset' flag into an enum
Remove ignored files by default when they are in the way
unpack-trees: make dir an internal-only struct
unpack-trees: introduce preserve_ignored to unpack_trees_options
read-tree, merge-recursive: overwrite ignored files by default
checkout, read-tree: fix leak of unpack_trees_options.dir
t2500: add various tests for nuking untracked files
"git add", "git mv", and "git rm" have been adjusted to avoid
updating paths outside of the sparse-checkout definition unless
the user specifies a "--sparse" option.
* ds/add-rm-with-sparse-index:
advice: update message to suggest '--sparse'
mv: refuse to move sparse paths
rm: skip sparse paths with missing SKIP_WORKTREE
rm: add --sparse option
add: update --renormalize to skip sparse paths
add: update --chmod to skip sparse paths
add: implement the --sparse option
add: skip tracked paths outside sparse-checkout cone
add: fail when adding an untracked sparse file
dir: fix pattern matching on dirs
dir: select directories correctly
t1092: behavior for adding sparse files
t3705: test that 'sparse_entry' is unstaged
Code clean-up in "git difftool".
* da/difftool:
difftool: add a missing space to the run_dir_diff() comments
difftool: remove an unnecessary call to strbuf_release()
difftool: refactor dir-diff to write files using helper functions
difftool: create a tmpdir path without repeated slashes
The ref iteration code used to optionally allow dangling refs to be
shown, which has been tightened up.
* jk/ref-paranoia:
refs: drop "broken" flag from for_each_fullref_in()
ref-filter: drop broken-ref code entirely
ref-filter: stop setting FILTER_REFS_INCLUDE_BROKEN
repack, prune: drop GIT_REF_PARANOIA settings
refs: turn on GIT_REF_PARANOIA by default
refs: omit dangling symrefs when using GIT_REF_PARANOIA
refs: add DO_FOR_EACH_OMIT_DANGLING_SYMREFS flag
refs-internal.h: reorganize DO_FOR_EACH_* flag documentation
refs-internal.h: move DO_FOR_EACH_* flags next to each other
t5312: be more assertive about command failure
t5312: test non-destructive repack
t5312: create bogus ref as necessary
t5312: drop "verbose" helper
t5600: provide detached HEAD for corruption failures
t5516: don't use HEAD ref for invalid ref-deletion tests
t7900: clean up some more broken refs
"git multi-pack-index write --bitmap" learns to propagate the
hashcache from original bitmap to resulting bitmap.
* tb/midx-write-propagate-namehash:
t5326: test propagating hashcache values
p5326: generate pack bitmaps before writing the MIDX bitmap
p5326: don't set core.multiPackIndex unnecessarily
p5326: create missing 'perf-tag' tag
midx.c: respect 'pack.writeBitmapHashcache' when writing bitmaps
pack-bitmap.c: propagate namehash values from existing bitmaps
t/helper/test-bitmap.c: add 'dump-hashes' mode
Regression in "git commit-graph" command line parsing has been
corrected.
* tb/commit-graph-usage-fix:
builtin/multi-pack-index.c: disable top-level --[no-]progress
builtin/commit-graph.c: don't accept common --[no-]progress
"git rebase <upstream> <tag>" failed when aborted in the middle, as
it mistakenly tried to write the tag object instead of peeling it
to HEAD.
* pw/rebase-of-a-tag-fix:
rebase: dereference tags
rebase: use lookup_commit_reference_by_name()
rebase: use our standard error return value
t3407: rework rebase --quit tests
t3407: strengthen rebase --abort tests
t3407: use test_path_is_missing
t3407: rename a variable
t3407: use test_cmp_rev
t3407: use test_commit
t3407: run tests in $TEST_DIRECTORY
More code paths that use the hack to add submodule's object
database to the set of alternate object store have been cleaned up.
* jt/add-submodule-odb-clean-up:
revision: remove "submodule" from opt struct
repository: support unabsorbed in repo_submodule_init
submodule: remove unnecessary unabsorbed fallback
Continued work on top of the hn/refs-errno-cleanup topic.
* ab/refs-files-cleanup:
refs/files: remove unused "errno != ENOTDIR" condition
refs/files: remove unused "errno == EISDIR" code
refs/files: remove unused "oid" in lock_ref_oid_basic()
refs API: remove OID argument to reflog_expire()
reflog expire: don't lock reflogs using previously seen OID
refs/files: add a comment about refs_reflog_exists() call
refs: make repo_dwim_log() accept a NULL oid
refs/debug: re-indent argument list for "prepare"
refs/files: remove unused "skip" in lock_raw_ref() too
refs/files: remove unused "extras/skip" in lock_ref_oid_basic()
refs: drop unused "flags" parameter to lock_ref_oid_basic()
refs/files: remove unused REF_DELETING in lock_ref_oid_basic()
refs/packet: add missing BUG() invocations to reflog callbacks
"git clone" from a repository whose HEAD is unborn into a bare
repository didn't follow the branch name the other side used, which
is corrected.
* jk/clone-unborn-head-in-bare:
clone: handle unborn branch in bare repos
"git stash", where the tentative change involves changing a
directory to a file (or vice versa), was confused, which has been
corrected.
* en/stash-df-fix:
stash: restore untracked files AFTER restoring tracked files
stash: avoid feeding directories to update-index
t3903: document a pair of directory/file bugs
To prevent the race described in an earlier patch, generate and pass a
reference snapshot to the multi-pack bitmap code, if we are writing one
from `git repack`.
This patch is mostly limited to creating a temporary file, and then
calling for_each_ref(). Except we try to minimize duplicates, since
doing so can drastically reduce the size in network-of-forks style
repositories. In the kernel's fork network (the repository containing
all objects from the kernel and all its forks), deduplicating the
references drops the snapshot size from 934 MB to just 12 MB.
But since we're handling duplicates in this way, we have to make sure
that we preferred references (those listed in pack.preferBitmapTips)
before non-preferred ones (to avoid recording an object which is pointed
at by a preferred tip as non-preferred).
We accomplish this by doing separate passes over the references: first
visiting each prefix in pack.preferBitmapTips, and then over the rest of
the references.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add missing space between colon sentence (`bisect-run failed:`) and the
following sentence (`git bisect--helper --bisect-state`).
Fixes: d1bbbe45df (bisect--helper: reimplement `bisect_run` shell
function in C, 2021-09-13)
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `buf` strbuf is reused again later in the same function, so there
is no benefit to calling strbuf_release(). The subsequent usage is
already using strbuf_reset() to reset the buffer, so releasing it
early is only going to lead to a wasteful reallocation.
Remove the early call to strbuf_release(). The same strbuf is already
cleaned up in the "finish:" section so nothing is leaked, either.
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a helpers function to handle the unlinking and writing
of the dir-diff submodule and symlink stand-in files.
Use the helpers to implement the guts of the hashmap loops.
This eliminate duplicate code and safeguards the submodules
hashmap loop against the symlink-chasing behavior that 5bafb3576a
(difftool: fix symlink-file writing in dir-diff mode, 2021-09-22)
addressed.
The submodules loop should not strictly require the unlink() call that
this is introducing to them, but it does not necessarily hurt them
either beyond the cost of the extra unlink().
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The paths generated by difftool are passed to user-facing diff tools.
Using paths with repeated slashes in them is a cosmetic blemish that
is exposed to users and can be avoided.
Use a strbuf to create the buffer used for the dir-diff tmpdir.
Strip trailing slashes from the value read from TMPDIR to avoid
repeated slashes in the generated paths.
Adjust the error handling to avoid leaking strbufs and to avoid
returning -1 to cmd_main().
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When repacking into a geometric series and writing a multi-pack bitmap,
it is beneficial to have the largest resulting pack be the preferred
object source in the bitmap's MIDX, since selecting the large packs can
lead to fewer broken delta chains and better compression.
Teach 'git repack' to identify this pack and pass it to the MIDX write
machinery in order to mark it as preferred.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach `git repack` a new `--write-midx` option for callers that wish to
persist a multi-pack index in their repository while repacking.
There are two existing alternatives to this new flag, but they don't
cover our particular use-case. These alternatives are:
- Call 'git multi-pack-index write' after running 'git repack', or
- Set 'GIT_TEST_MULTI_PACK_INDEX=1' in your environment when running
'git repack'.
The former works, but introduces a gap in bitmap coverage between
repacking and writing a new MIDX (since the repack may have deleted a
pack included in the existing MIDX, invalidating it altogether).
Setting the 'GIT_TEST_' environment variable is obviously unsupported.
In fact, even if it were supported officially, it still wouldn't work,
because it generates the MIDX *after* redundant packs have been dropped,
leading to the same issue as above.
Introduce a new option which eliminates this race by teaching `git
repack` to generate the MIDX at the critical point: after the new packs
have been written and moved into place, but before the redundant packs
have been removed.
This option is compatible with `git repack`'s '--bitmap' option (it
changes the interpretation to be: "write a bitmap corresponding to the
MIDX after one has been generated").
There is a little bit of additional noise in the patch below to avoid
repeating ourselves when selecting which packs to delete. Instead of a
single loop as before (where we iterate over 'existing_packs', decide if
a pack is worth deleting, and if so, delete it), we have two loops (the
first where we decide which ones are worth deleting, and the second
where we actually do the deleting). This makes it so we have a single
check we can make consistently when (1) telling the MIDX which packs we
want to exclude, and (2) actually unlinking the redundant packs.
There is also a tiny change to short-circuit the body of
write_midx_included_packs() when no packs remain in the case of an empty
repository. The MIDX code does not handle this, so avoid trying to
generate a MIDX covering zero packs in the first place.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We only ask whether stderr is a tty before calling
'prune_packed_objects()', but the subsequent patch will add another use.
Extract this check into a variable so that both can use it without
having to call 'isatty()' twice.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new variable `existing_kept_packs` (and corresponding parameter
`fname_kept_list`) added by the previous patch make it seem like
`existing_packs` and `fname_list` are each subsets of the other two
respectively.
In reality, each pair is disjoint: one stores the packs without .keep
files, and the other stores the packs with .keep files. Rename each to
more clearly reflect this.
Suggested-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In order to be able to write a multi-pack index during repacking, `git
repack` must keep track of which packs it wants to write into the MIDX.
This set is the union of existing packs which will not be deleted,
new pack(s) generated as a result of the repack, and .keep packs.
Prior to this patch, `git repack` populated the list of existing packs
only when repacking all-into-one (i.e., with `-A` or `-a`), but we will
soon need to know this list when repacking when writing a MIDX without
a-i-o.
Populate the list of existing packs unconditionally, and guard removing
packs from that list only when repacking a-i-o.
Additionally, keep track of filenames of kept packs separately, since
this, too, will be used in an upcoming patch.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To figure out which commits we can write a bitmap for, the multi-pack
index/bitmap code does a reachability traversal, marking any commit
which can be found in the MIDX as eligible to receive a bitmap.
This approach will cause a problem when multi-pack bitmaps are able to
be generated from `git repack`, since the reference tips can change
during the repack. Even though we ignore commits that don't exist in
the MIDX (when doing a scan of the ref tips), it's possible that a
commit in the MIDX reaches something that isn't.
This can happen when a multi-pack index contains some pack which refers
to loose objects (e.g., if a pack was pushed after starting the repack
but before generating the MIDX which depends on an object which is
stored as loose in the repository, and by definition isn't included in
the multi-pack index).
By taking a snapshot of the references before we start repacking, we can
close that race window. In the above scenario (where we have a packed
object pointing at a loose one), we'll either (a) take a snapshot of the
references before seeing the packed one, or (b) take it after, at which
point we can guarantee that the loose object will be packed and included
in the MIDX.
This patch does just that. It writes a temporary "reference snapshot",
which is a list of OIDs that are at the ref tips before writing a
multi-pack bitmap. References that are "preferred" (i.e,. are a suffix
of at least one value of the 'pack.preferBitmapTips' configuration) are
marked with a special '+'.
The format is simple: one line per commit at each tip, with an optional
'+' at the beginning (for preferred references, as described above).
When provided, the reference snapshot is used to drive bitmap selection
instead of the MIDX code doing its own traversal. When it isn't
provided, the usual traversal takes place instead.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To power a new `--write-midx` mode, `git repack` will want to write a
multi-pack index containing a certain set of packs in the repository.
This new option will be used by `git repack` to write a MIDX which
contains only the packs which will survive after the repack (that is, it
will exclude any packs which are about to be deleted).
This patch effectively exposes the function implemented in the previous
commit via the `git multi-pack-index` builtin. An alternative approach
would have been to call that function from the `git repack` builtin
directly, but this introduces awkward problems around closing and
reopening the object store, so the MIDX will be written out-of-process.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since cmd_mv() does not operate on cache entries and instead directly
checks the filesystem, we can only use path_in_sparse_checkout() as a
mechanism for seeing if a path is sparse or not. Be sure to skip
returning a failure if '-k' is specified.
To ensure that the advice around sparse paths is the only reason a move
failed, be sure to check this as the very last thing before inserting
into the src_for_dst list.
The tests cover a variety of cases such as whether the target is tracked
or untracked, and whether the source or destination are in or outside of
the sparse-checkout definition.
Helped-by: Matheus Tavares Bernardino <matheus.bernardino@usp.br>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a path does not match the sparse-checkout cone but is somehow missing
the SKIP_WORKTREE bit, then 'git rm' currently succeeds in removing the
file. One reason a user might be in this situation is a merge conflict
outside of the sparse-checkout cone. Removing such a file might be
problematic for users who are not sure what they are doing.
Add a check to path_in_sparse_checkout() when 'git rm' is checking if a
path should be considered for deletion. Of course, this check is ignored
if the '--sparse' option is specified, allowing users who accept the
risks to continue with the removal.
This also removes a confusing behavior where a user asks for a directory
to be removed, but only the entries that are within the sparse-checkout
definition are removed. Now, 'git rm <dir>' will fail without '--sparse'
and will succeed in removing all contained paths with '--sparse'.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As we did previously in 'git add', add a '--sparse' option to 'git rm'
that allows modifying paths outside of the sparse-checkout definition.
The existing checks in 'git rm' are restricted to tracked files that
have the SKIP_WORKTREE bit in the current index. Future changes will
cause 'git rm' to reject removing paths outside of the sparse-checkout
definition, even if they are untracked or do not have the SKIP_WORKTREE
bit.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We added checks for path_in_sparse_checkout() to portions of 'git add'
that add warnings and prevent stagins a modification, but we skipped the
--renormalize mode. Update renormalize_tracked_files() to ignore cache
entries whose path is outside of the sparse-checkout cone (unless
--sparse is provided). Add a test in t3705.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We added checks for path_in_sparse_checkout() to portions of 'git add'
that add warnings and prevent staging a modification, but we skipped the
--chmod mode. Update chmod_pathspec() to ignore cache entries whose path
is outside of the sparse-checkout cone (unless --sparse is provided).
Add a test in t3705.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We previously modified 'git add' to refuse updating index entries
outside of the sparse-checkout cone. This is justified to prevent users
from accidentally getting into a confusing state when Git removes those
files from the working tree at some later point.
Unfortunately, this caused some workflows that were previously possible
to become impossible, especially around merge conflicts outside of the
sparse-checkout cone. These were documented in tests within t1092.
We now re-enable these workflows using a new '--sparse' option to 'git
add'. This allows users to signal "Yes, I do know what I'm doing with
these files," and accept the consequences of the files leaving the
worktree later.
We delay updating the advice message until implementing a similar option
in 'git rm' and 'git mv'.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When 'git add' adds a tracked file that is outside of the
sparse-checkout cone, it checks the SKIP_WORKTREE bit to see if the file
exists outside of the sparse-checkout cone. This is usually correct,
except in the case of a merge conflict outside of the cone.
Modify add_pathspec_matched_against_index() to be more careful about
paths by checking the sparse-checkout patterns in addition to the
SKIP_WORKTREE bit. This causes 'git add' to no longer allow files
outside of the cone that removed the SKIP_WORKTREE bit due to a merge
conflict.
With only this change, users will only be able to add the file after
adding the file to the sparse-checkout cone. A later change will allow
users to force adding even though the file is outside of the
sparse-checkout cone.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The add_files() method in builtin/add.c takes a set of untracked files
that are being added by the input pathspec and inserts them into the
index. If these files are outside of the sparse-checkout cone, then they
gain the SKIP_WORKTREE bit at some point. However, this was not checked
before inserting into the index, so these files are added even though we
want to avoid modifying the index outside of the sparse-checkout cone.
Add a check within add_files() for these files and write the advice
about files outside of the sparse-checkout cone.
This behavior change modifies some existing tests within t1092. These
tests intended to document how a user could interact with the existing
behavior in place. Many of these tests need to be marked as expecting
failure. A future change will allow these tests to pass by adding a flag
to 'git add' that allows users to modify index entries outside of the
sparse-checkout cone.
The 'submodule handling' test is intended to document what happens to
directories that contain a submodule when the sparse index is enabled.
It is not trying to say that users should be able to add submodules
outside of the sparse-checkout cone, so that test can be modified to
avoid that operation.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move various *_INIT macros to use designated initializers. This helps
readability. I've only picked those leftover macros that were not
touched by another in-flight series of mine which changed others, but
also how initialization was done.
In the case of SUBMODULE_ALTERNATE_SETUP_INIT I've left an explicit
initialization of "error_mode", even though
SUBMODULE_ALTERNATE_ERROR_IGNORE itself is defined as "0". Let's not
peek under the hood and assume that enum fields we know the value of
will stay at "0".
The change to "TESTSUITE_INIT" in "t/helper/test-run-command.c" was
part of an earlier on-list version[1] of c90be786da (test-tool
run-command: fix flip-flop init pattern, 2021-09-11).
1. https://lore.kernel.org/git/patch-1.1-0aa4523ab6e-20210909T130849Z-avarab@gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In C it isn't required to specify that all members of a struct are
zero'd out to 0, NULL or '\0', just providing a "{ 0 }" will
accomplish that.
Let's also change code that provided N zero'd fields to just
provide one, and change e.g. "{ NULL }" to "{ 0 }" for
consistency. I.e. even if the first member is a pointer let's use "0"
instead of "NULL". The point of using "0" consistently is to pick one,
and to not have the reader wonder why we're not using the same pattern
everywhere.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the last few commits we focused on code in unpack-trees.c that
mistakenly removed untracked files or directories. There may be more of
those, but in this commit we change our focus: callers of toplevel
commands that are expected to remove untracked files or directories.
As noted previously, we have toplevel commands that are expected to
delete untracked files such as 'read-tree --reset', 'reset --hard', and
'checkout --force'. However, that does not mean that other highlevel
commands that happen to call these other commands thought about or
conveyed to users the possibility that untracked files could be removed.
Audit the code for such callsites, and add comments near existing
callsites to mention whether these are safe or not.
My auditing is somewhat incomplete, though; it skipped several cases:
* git-rebase--preserve-merges.sh: is in the process of being
deprecated/removed, so I won't leave a note that there are
likely more bugs in that script.
* contrib/git-new-workdir: why is the -f flag being used in a new
empty directory?? It shouldn't hurt, but it seems useless.
* git-p4.py: Don't see why -f is needed for a new dir (maybe it's
not and is just superfluous), but I'm not at all familiar with
the p4 stuff
* git-archimport.perl: Don't care; arch is long since dead
* git-cvs*.perl: Don't care; cvs is long since dead
Also, the reset --hard in builtin/worktree.c looks safe, due to only
running in an empty directory.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Traditionally, unpack_trees_options->reset was used to signal that it
was okay to delete any untracked files in the way. This was used by
`git read-tree --reset`, but then started appearing in other places as
well. However, many of the other uses should not be deleting untracked
files in the way. Change this value to an enum so that a value of 1
(i.e. "true") can be split into two:
UNPACK_RESET_PROTECT_UNTRACKED,
UNPACK_RESET_OVERWRITE_UNTRACKED
In order to catch accidental misuses (i.e. where folks call it the way
they traditionally used to), define the special enum value of
UNPACK_RESET_INVALID = 1
which will trigger a BUG().
Modify existing callers so that
read-tree --reset
reset --hard
checkout --force
continue using the UNPACK_RESET_OVERWRITE_UNTRACKED logic, while other
callers, including
am
checkout without --force
stash (though currently dead code; reset always had a value of 0)
numerous callers from rebase/sequencer to reset_head()
will use the new UNPACK_RESET_PROTECT_UNTRACKED value.
Also, note that it has been reported that 'git checkout <treeish>
<pathspec>' currently also allows overwriting untracked files[1]. That
case should also be fixed, but it does not use unpack_trees() and thus
is outside the scope of the current changes.
[1] https://lore.kernel.org/git/15dad590-087e-5a48-9238-5d2826950506@gmail.com/
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change several commands to remove ignored files by default when they are
in the way. Since some commands (checkout, merge) take a
--no-overwrite-ignore option to allow the user to configure this, and it
may make sense to add that option to more commands (and in the case of
merge, actually plumb that configuration option through to more of the
backends than just the fast-forwarding special case), add little
comments about where such flags would be used.
Incidentally, this fixes a test failure in t7112.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, every caller of unpack_trees() that wants to ensure ignored
files are overwritten by default needs to:
* allocate unpack_trees_options.dir
* flip the DIR_SHOW_IGNORED flag in unpack_trees_options.dir->flags
* call setup_standard_excludes
AND then after the call to unpack_trees() needs to
* call dir_clear()
* deallocate unpack_trees_options.dir
That's a fair amount of boilerplate, and every caller uses identical
code. Make this easier by instead introducing a new boolean value where
the default value (0) does what we want so that new callers of
unpack_trees() automatically get the appropriate behavior. And move all
the handling of unpack_trees_options.dir into unpack_trees() itself.
While preserve_ignored = 0 is the behavior we feel is the appropriate
default, we defer fixing commands to use the appropriate default until a
later commit. So, this commit introduces several locations where we
manually set preserve_ignored=1. This makes it clear where code paths
were previously preserving ignored files when they should not have been;
a future commit will flip these to instead use a value of 0 to get the
behavior we want.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This fixes a long-standing patchwork of ignored files handling in
read-tree and merge-recursive, called out and suggested by Junio long
ago. Quoting from commit dcf0c16ef1 ("core.excludesfile clean-up"
2007-11-16):
git-read-tree takes --exclude-per-directory=<gitignore>,
not because the flexibility was needed. Again, this was
because the option predates the standardization of the ignore
files.
...
On the other hand, I think it makes perfect sense to fix
git-read-tree, git-merge-recursive and git-clean to follow the
same rule as other commands. I do not think of a valid use case
to give an exclude-per-directory that is nonstandard to
read-tree command, outside a "negative" test in the t1004 test
script.
This patch is the first step to untangle this mess.
The next step would be to teach read-tree, merge-recursive and
clean (in C) to use setup_standard_excludes().
History shows each of these were partially or fully fixed:
* clean was taught the new trick in 1617adc7a0 ("Teach git clean to
use setup_standard_excludes()", 2007-11-14).
* read-tree was primarily used by checkout & merge scripts. checkout
and merge later became builtins and were both fixed to use the new
setup_standard_excludes() handling in fc001b526c ("checkout,merge:
loosen overwriting untracked file check based on info/exclude",
2011-11-27). So the primary users were fixed, though read-tree
itself was not.
* merge-recursive has now been replaced as the default merge backend
by merge-ort. merge-ort fixed this by using
setup_standard_excludes() starting early in its implementation; see
commit 6681ce5cf6 ("merge-ort: add implementation of checkout()",
2020-12-13), largely due to its design depending on checkout() and
thus being influenced by the checkout code. However,
merge-recursive itself was not fixed here, in part because its
design meant it had difficulty differentiating between untracked
files, ignored files, leftover tracked files that haven't been
removed yet due to order of processing files, and files written by
itself due to collisions).
Make the conversion more complete by now handling read-tree and
handling at least the unpack_trees() portion of merge-recursive. While
merge-recursive is on its way out, fixing the unpack_trees() portion is
easy and facilitates some of the later changes in this series. Note
that fixing read-tree makes the --exclude-per-directory option to
read-tree useless, so we remove it from the documentation (though we
continue to accept it if passed).
The read-tree changes happen to fix a bug in t1013.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
