A long list of suggested changes to the translation. None of them are
clear-cut, though I of course think they are an improvement ;-)
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Ralf Thielow <ralf.thielow@googlemail.com>
"schlecht" doesn't quite sound right to me, especially in messages
like "bad object" where the object doesn't even exist in the first
place.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Ralf Thielow <ralf.thielow@googlemail.com>
These are all obviously wrong, such as typos or messages where the
current translation is based on a misunderstanding of the original
message.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Ralf Thielow <ralf.thielow@googlemail.com>
The functions read_directory_recursive() and treat_leading_path() both
use buffers sized to fit PATH_MAX characters. The latter can be made to
overrun its buffer, e.g. like this:
$ a=0123456789abcdef
$ a=$a$a$a$a$a$a$a$a
$ a=$a$a$a$a$a$a$a$a
$ a=$a$a$a$a$a$a$a$a
$ git add $a/a
Instead of trying to add a check and potentionally forgetting to address
similar cases, convert the involved functions and their helpers to use
struct strbuf. The patch is suprisingly large because the helpers
treat_path() and treat_one_path() modify the buffer as well and thus need
to be converted, too.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current code reads the config and command-line options
into a separate "colopts" variable, and then copies the
contents of that variable into the "struct wt_status". We
can eliminate the extra variable and copy just write
straight into the wt_status struct.
This simplifies the "status" code a little bit.
Unfortunately, it makes the "commit" code one line more
complex; a side effect of the separate variable was that
"commit" did not copy the colopts variable, so any
column.status configuration had no effect.
The result still ends up cleaner, though. In the previous
version, it was unclear whether commit simply forgot to copy
the colopt variable, or whether it was intentional. Now it
explicitly turns off column options. Furthermore, if commit
later learns to respect column.status, this will make the
end result simpler. I punted on just adding that feature
now, because it was sufficiently non-obvious that it should
not go into a refactoring patch.
Signed-off-by: Jeff King <peff@peff.net>
There is no reason not to, as the user has to explicitly ask
for it, so we are not breaking compatibility by doing so. We
can do this simply by moving the "show_branch" flag into
the wt_status struct. As a bonus, this saves us from passing
it explicitly, simplifying the code.
Signed-off-by: Jeff King <peff@peff.net>
When the "-z" option is given to status, we are supposed to
NUL-terminate each record. However, the "-b" code to show
the tracking branch did not respect this, and always ended
with a newline.
Signed-off-by: Jeff King <peff@peff.net>
This option is passed separately to the wt_status printing
functions, whereas every other formatting option is
contained in the wt_status struct itself. Let's do the same
here, so we can avoid passing it around through the call
stack.
Signed-off-by: Jeff King <peff@peff.net>
The options are declared as a static global, but really they
need only be accessible from cmd_commit. Additionally,
declare the "struct wt_status" in cmd_commit and cmd_status
as static at the top of each function; this will let the
options lists reference them directly, which will facilitate
further cleanups.
Signed-off-by: Jeff King <peff@peff.net>
NO_PREAD simulates pread() as a sequence of seek, read, seek in
compat/pread.c. The simulation is not thread-safe because another
thread could move the file offset away in the middle of pread
operation. Do not allow threading in that case.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This puts delta resolving on each base on a separate thread, one base
cache per thread. Per-thread data is grouped in struct thread_local.
When running with nr_threads == 1, no pthreads calls are made. The
system essentially runs in non-thread mode.
An experiment on a Xeon 24 core machine with git.git shows that
performance does not increase proportional to the number of cores. So
by default, we use maximum 3 cores. Some numbers with --threads from 1
to 16:
1..4
real 0m8.003s 0m5.307s 0m4.321s 0m3.830s
user 0m7.720s 0m8.009s 0m8.133s 0m8.305s
sys 0m0.224s 0m0.372s 0m0.360s 0m0.360s
5..8
real 0m3.727s 0m3.604s 0m3.332s 0m3.369s
user 0m9.361s 0m9.817s 0m9.525s 0m9.769s
sys 0m0.584s 0m0.624s 0m0.540s 0m0.560s
9..12
real 0m3.036s 0m3.139s 0m3.177s 0m2.961s
user 0m8.977s 0m10.205s 0m9.737s 0m10.073s
sys 0m0.596s 0m0.680s 0m0.684s 0m0.680s
13..16
real 0m2.985s 0m2.894s 0m2.975s 0m2.971s
user 0m9.825s 0m10.573s 0m10.833s 0m11.361s
sys 0m0.788s 0m0.732s 0m0.904s 0m1.016s
On an Intel dual core and linux-2.6.git
1..4
real 2m37.789s 2m7.963s 2m0.920s 1m58.213s
user 2m28.415s 2m52.325s 2m50.176s 2m41.187s
sys 0m7.808s 0m11.181s 0m11.224s 0m10.731s
Thanks Ramsay Jones for troubleshooting and support on MinGW platform.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The second pass in parse_pack_objects() are split into
resolve_deltas(). The final phase, fixing thin pack or just seal the
pack, is now in conclude_pack() function. Main pack processing is now
a sequence of these functions:
- parse_pack_objects() reads through the input pack
- resolve_deltas() makes sure all deltas can be resolved
- conclude_pack() seals the output pack
- write_idx_file() writes companion index file
- final() moves the pack/index to proper place
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Describe config file selection in git-config. While the usage message of
git-config shows --local, the documentation page did not contain anything
about that.
Signed-off-by: Florian Achleitner <florian.achleitner.2.6.31@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduction of opt->date_mode_explicit was a step in the right direction,
but lost that crucial bit at the very end of the callchain, and the callee
could not tell an explicitly specified "I want *date* but in default format"
from the built-in default value passed when there was no --date specified.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git diff --stat" used to fully count a binary file with modified
execution bits whose contents is unmodified, which was not right.
By Zbigniew Jędrzejewski-Szmek (4) and Johannes Sixt (1)
* zj/diff-empty-chmod:
t4006: Windows do not have /dev/zero
diff --stat: do not run diff on indentical files
diff --stat: report mode-only changes for binary files like text files
tests: check --[short]stat output after chmod
test: modernize style of t4006
Conflicts:
diff.c
"log -z --pretty=tformat:..." does not terminate each record with NUL
and this is a beginning of an attempt to fix it. It still is not right
but the patch does not make externally observable behaviour worse.
By Jan Krüger (1) and Junio C Hamano (1)
* jk/maint-tformat-with-z:
log-tree: the previous one is still not quite right
log-tree: use custom line terminator in line termination mode
Rolls the two-directory-diff logic from diffall script (in contrib/) into
"git difftool" framework.
By Tim Henigan
* th/difftool-diffall:
difftool: print list of valid tools with '--tool-help'
difftool: teach difftool to handle directory diffs
difftool: eliminate setup_environment function
difftool: stop appending '.exe' to git
difftool: remove explicit change of PATH
difftool: exit(0) when usage is printed
difftool: add '--no-gui' option
difftool: parse options using Getopt::Long
When using a Perl script on a system where "perl" found on user's $PATH
could be ancient or otherwise broken, we allow builders to specify the
path to a good copy of Perl with $PERL_PATH. The gitweb test forgot to
use that Perl when running its test.
By Jeff King (1) and Zbigniew Jędrzejewski-Szmek (1)
* jk/maint-gitweb-test-use-sane-perl:
Consistently use perl from /usr/bin/ for scripts
t/gitweb-lib: use $PERL_PATH to run gitweb
"git config --rename-section" to rename an existing section into a bogus
one did not check the new name.
By Jeff King
* jk/maint-config-bogus-section:
config: reject bogus section names for --rename-section
In the older days, the header "Conflicts:" in "cherry-pick" and "merge"
was separated by a blank line from the list of paths that follow for
readability, but when "merge" was rewritten in C, we lost it by
mistake. Remove the newline from "cherry-pick" to make them match again.
By Ralf Thielow
* rt/cherry-revert-conflict-summary:
sequencer: remove additional blank line
The filesystem boundary was not correctly reported when .git directory
discovery stopped at a mount point.
By Clemens Buchacher
* cb/maint-report-mount-point-correctly-in-setup:
properly keep track of current working directory
In 5bd631b3 ("clone: support multiple levels of verbosity"), the
default behavior to show progress of the implicit checkout in
the clone-command regressed so that progress was only shown if
the verbose-option was specified.
Fix this by making option_verbosity == 0 output progress as well.
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Attach example sections to previous level of indenting.
Fix a trailing ::
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use new __gitcomp_nl; this is the last place that uses COMPREPLY and
compgen directly outside __gitcomp* functions.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Acked-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When git checkout switches from a detached HEAD to any other commit, then
all orphaned commits were listed in a warning:
Warning: you are leaving 2 commits behind...:
a5e5396 another fixup
6aa1af6 fixup foo
But if the new commit is actually one from this list (6aa1af6 in this
example), then the list in the warning can be truncated at the new HEAD,
because history beginning at HEAD is not "left behind". This makes it so.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the test that orphans commits to leave 2 commits behind. Add a test
that leaves only one of these behind.
The next patch will truncate the list of orphaned commits earlier. With
this preliminary update, its effect will become more obvious.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Your filesystem may support hardlinks, but you may choose not to use them
when installing git-foo builtins and favor symblic links or copies for
whatever reason.
The installation procedure of git-gui/ directory is not touched with this
patch and git-citool still ends up being a hardlink to git-gui, but it
needs to be addressed separately.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we are showing reflog selectors during a walk, we infer
from context whether the user wanted to see the index in
each selector, or the reflog date. The current rules are:
1. if the user asked for an explicit date format in the
output, show the date
2. if the user asked for ref@{now}, show the date
3. if neither is true, show the index
However, if we see "ref@{0}", that should be a strong clue
that the user wants to see the counted version. In fact, it
should be much stronger than the date format in (1). The
user may have been setting the date format to use in another
part of the output (e.g., in --format="%gd (%ad)", they may
have wanted to influence the author date).
This patch flips the rules to:
1. if the user asked for ref@{0}, always show the index
2. if the user asked for ref@{now}, always show the date
3. otherwise, we have just "ref"; show them counted by
default, but respect the presence of "--date" as a clue
that the user wanted them date-based
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we prepare to walk a reflog, we parse the specification
and pull some information from it, such as which reflog to
look in (e.g., HEAD), and where to start (e.g., HEAD@{10} or
HEAD@{yesterday}). The resulting struct has a "recno" field
to show where in the reflog we are starting. It also has a
"flag" field; if true, it means the recno field came from
parsing a date like HEAD@{yesterday}.
There are two problems with this:
1. "flag" is an absolutely terrible name, as it conveys
nothing about the meaning
2. you can tell "HEAD" from "HEAD@{yesterday}", but you
can't differentiate "HEAD" from "HEAD{0}"
This patch converts the flag into a tri-state (and gives it
a better name!).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we show a reflog selector (e.g., via "git log -g"), we
perform some DWIM magic: while we normally show the entry's
index (e.g., HEAD@{1}), if the user has given us a date
with "--date", then we show a date-based select (e.g.,
HEAD@{yesterday}).
However, we don't want to trigger this magic if the
alternate date format we got was from the "log.date"
configuration; that is not sufficiently strong context for
us to invoke this particular magic. To fix this, commit
f4ea32f (improve reflog date/number heuristic, 2009-09-24)
introduced a "date_mode_explicit" flag in rev_info. This
flag is set only when we see a "--date" option on the
command line, and we a vanilla date to the reflog code if
the date was not explicit.
Later, commit 8f8f547 (Introduce new pretty formats %g[sdD]
for reflog information, 2009-10-19) added another way to
show selectors, and it did not respect the date_mode_explicit
flag from f4ea32f.
This patch propagates the date_mode_explicit flag to the
pretty-print code, which can then use it to pass the
appropriate date field to the reflog code. This brings the
behavior of "%gd" in line with the other formats, and means
that its output is independent of any user configuration.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We already check that @{now} and "--date" cause the
displayed selector to use the date for both the multiline
and oneline formats. However, we miss several cases:
1. The --format=%gd selector is not tested at all.
2. We do not check how the log.date config interacts with the
"--date" magic (according to f4ea32f, it should not
impact the output).
Doing so reveals that the combination of both (log.date
combined with the %gd format) does not behave as expected.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We tend to keep long lists sorted (extensions are not taken into
account), which helps spot a name easily by eye. Rearrange a few
items so these lists remain sorted.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function used to return NULL when asked to find the containing
directory for a ref that does not exist, allowing the caller to
omit iteration altogether. But a misconversion in an earlier change
"refs.c: extract function search_for_subdir()" started returning the
top-level directory entry, forcing callers to walk everything.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the case the pointer could be NULL, the function that gave the caller
the NULL pointer would already have issued an error message, so simply
returning early with an error status without issuing a new message is
sufficient. The same for parse_commit() that will show necessary error
message when the argument is not NULL, and will return error silently
when the argument is NULL.
Noticed-by: Michael Mueller
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
