The git_config_set_multivar_in_file_gently() and related methods now
take a 'flags' bitfield, so add a new bit representing the --fixed-value
option from 'git config'. This alters the purpose of the value_pattern
parameter to be an exact string match. This requires some initialization
changes in git_config_set_multivar_in_file_gently() and a new strcmp()
call in the matches() method.
The new CONFIG_FLAGS_FIXED_VALUE flag is initialized in builtin/config.c
based on the --fixed-value option, and that needs to be updated in
several callers.
This patch only affects some of the modes of 'git config', and the rest
will be completed in the next change.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'git config' builtin takes a 'value-pattern' parameter for several
actions. This can cause confusion when expecting exact value matches
instead of regex matches, especially when the input string contains
metacharacters. While callers can escape the patterns themselves, it
would be more friendly to allow an argument to disable the pattern
matching in favor of an exact string match.
Add a new '--fixed-value' option that does not currently change the
behavior. The implementation will be filled in by later changes for
each appropriate action. For now, check and test that --fixed-value
will abort the command when included with an incompatible action or
without a 'value-pattern' argument.
The name '--fixed-value' was chosen over something simpler like
'--fixed' because some commands allow regular expressions on the
key in addition to the value.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --replace-all option was added in 4ddba79d (git-config-set: add more
options) but was not tested along with the 'value-pattern' parameter.
Since we will be updating this option to optionally treat 'value-pattern'
as a fixed string, let's add a test here that documents the current
behavior.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Without additional modifiers, 'git config <key> <value>' attempts
to set a single value in the .git/config file. When the
value-pattern parameter is supplied, this command behaves in a
non-trivial manner.
Consider 'git config <key> <value> <value-pattern>'. The expected
behavior is as follows:
1. If there are multiple existing values that match 'value-pattern',
then the command fails. Users should use --replace-all instead.
2. If there is no existing values match 'value-pattern', then the
'key=value' pair is appended, making this 'key' a multi-valued
config setting.
3. If there is one existing value that matches 'value-pattern', then
the new config has one entry where 'key=value'.
Add a test that demonstrates these options. Break from the existing
pattern in t1300-config.sh to use 'git config --file=<file>' instead of
modifying .git/config directly to prevent possibly incompatible repo
states. Also use 'git config --file=<file> --list' for config state
comparison instead of the config file format. This makes the tests
more readable.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'value_regex' argument in the 'git config' builtin is poorly named,
especially related to an upcoming change that allows exact string
matches instead of ERE pattern matches.
Perform a mostly mechanical change of every instance of 'value_regex' to
'value_pattern' in the codebase. This is only critical for documentation
and error messages, but it is best to be consistent inside the codebase,
too.
For documentation, use 'value-pattern' which is better punctuation. This
affects Documentation/git-config.txt and the usage in builtin/config.c,
which was already mixed between 'value_regex' and 'value-regex'.
I gave some thought to leaving the value_regex variables inside config.c
that are regex_t pointers. However, it is probably best to keep the name
consistent with the rest of the variables.
This does not update the translations inside the po/ directory, as that
creates conflicts with ongoing work. The input strings should
automatically update through automation, and a few of the output strings
currently use "[value_regex]" directly.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We will extend the flexibility of the config API. Before doing so, let's
take an existing 'int multi_replace' parameter and replace it with a new
'unsigned flags' parameter that can take multiple options as a bit field.
Update all callers that specified multi_replace to now specify the
CONFIG_FLAGS_MULTI_REPLACE flag. To add more clarity, extend the
documentation of git_config_set_multivar_in_file() including a clear
labeling of its arguments. Other config API methods in config.h require
only a change of the final parameter from 'int' to 'unsigned'.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git blame --ignore-revs-file=<file>" learned to ignore a
non-existent object name in the input, instead of complaining.
* jc/blame-ignore-fix:
blame: silently ignore invalid ignore file objects
"make DEVELOPER=1 sparse" used to run sparse and let it emit
warnings; now such warnings will cause an error.
* jc/sparse-error-for-developer-build:
Makefile: enable -Wsparse-error for DEVELOPER build
"git blame -L :funcname -- path" did not work well for a path for
which a userdiff driver is defined.
* pb/blame-funcname-range-userdiff:
blame: simplify 'setup_blame_bloom_data' interface
blame: simplify 'setup_scoreboard' interface
blame: enable funcname blaming with userdiff driver
line-log: mention both modes in 'blame' and 'log' short help
doc: add more pointers to gitattributes(5) for userdiff
blame-options.txt: also mention 'funcname' in '-L' description
doc: line-range: improve formatting
doc: log, gitk: move '-L' description to 'line-range-options.txt'
Preparation for a new merge strategy.
* en/merge-ort-api-null-impl:
merge,rebase,revert: select ort or recursive by config or environment
fast-rebase: demonstrate merge-ort's API via new test-tool command
merge-ort-wrappers: new convience wrappers to mimic the old merge API
merge-ort: barebones API of new merge strategy with empty implementation
Parts of "git maintenance" to ease writing crontab entries (and
other scheduling system configuration) for it.
* ds/maintenance-part-3:
maintenance: add troubleshooting guide to docs
maintenance: use 'incremental' strategy by default
maintenance: create maintenance.strategy config
maintenance: add start/stop subcommands
maintenance: add [un]register subcommands
for-each-repo: run subcommands on configured repos
maintenance: add --schedule option and config
maintenance: optionally skip --auto process
"git rebase -i" did not store ORIG_HEAD correctly.
* pw/rebase-i-orig-head:
rebase -i: simplify get_revision_ranges()
rebase -i: use struct object_id when writing state
rebase -i: use struct object_id rather than looking up commit
rebase -i: stop overwriting ORIG_HEAD buffer
"git format-patch --output=there" did not work as expected and
instead crashed. The option is now supported.
* jk/format-patch-output:
format-patch: support --output option
format-patch: tie file-opening logic to output_directory
format-patch: refactor output selection
"git log -L<range>:<path>" is documented to take no pathspec, but
this was not enforced by the command line option parser, which has
been corrected.
* jc/line-log-takes-no-pathspec:
log: diagnose -L used with pathspec as an error
The code to see if "git stash drop" can safely remove refs/stash
has been made more carerful.
* rs/empty-reflog-check-fix:
stash: simplify reflog emptiness check
Add t/perf support for fsmonitor.
* nk/perf-fsmonitor:
t/perf/fsmonitor: add benchmark for dirty status
t/perf/fsmonitor: perf comparison of multiple fsmonitor integrations
t/perf/fsmonitor: initialize test with git reset
t/perf/fsmonitor: factor setup for fsmonitor into function
t/perf/fsmonitor: silence initial git commit
t/perf/fsmonitor: shorten DESC to basename
t/perf/fsmonitor: factor description out for readability
t/perf/fsmonitor: improve error message if typoing hook name
t/perf/fsmonitor: move watchman setup to one-time-repo-setup
t/perf/fsmonitor: separate one time repo initialization
Preparation for a new merge strategy.
* en/merge-tests:
t6423: add more details about direct resolution of directories
t6423: note improved ort handling with untracked files
t6423, t6436: note improved ort handling with dirty files
merge tests: expect slight differences in output for recursive vs. ort
t6423: expect improved conflict markers labels in the ort backend
t6404, t6423: expect improved rename/delete handling in ort backend
t6416: correct expectation for rename/rename(1to2) + directory/file
merge tests: expect improved directory/file conflict handling in ort
t/: new helper for tests that pass with ort but fail with recursive
Prepare a test script to transition of the default branch name to
'main'.
* js/default-branch-name-adjust-t5515:
t5515: use `main` as the name of the main branch for testing (conclusion)
t5515: use `main` as the name of the main branch for testing (part 3)
t5515: use `main` as the name of the main branch for testing (part 2)
t5515: use `main` as the name of the main branch for testing (part 1)
"git fetch --depth=<n>" over the stateless RPC / smart HTTP
transport handled EOF from the client poorly at the server end.
* dd/upload-pack-stateless-eof:
upload-pack: allow stateless client EOF just prior to haves
Recently the format of an internal state file "rebase -i" uses has
been tightened up for consistency, which would hurt those who start
"rebase -i" with old git and then continue with new git. Loosen
the reader side a bit (which we may want to tighten again in a year
or so).
* jc/sequencer-stopped-sha-simplify:
sequencer: tolerate abbreviated stopped-sha file
Test code clean-up.
* js/test-whitespace-fixes:
t9603: use tabs for indentation
t5570: remove trailing padding
t5400,t5402: consistently indent with tabs, not with spaces
t3427: adjust stale comment
t3406: indent with tabs, not spaces
t1004: insert missing "branch" in a message
The documentation on the "--abbrev=<n>" option did not say the
output may be longer than "<n>" hexdigits, which has been
clarified.
* jc/abbrev-doc:
doc: clarify that --abbrev=<n> is about the minimum length
In 1af265f0 (compat/bswap.h: simplify MSVC endianness
detection, 2020-11-08) we attempted to simplify code by assuming MSVC
builds will be for little-endian machines, since only unusably old
versions of MSVC supported big-endian MIPS and m68k architectures.
However, it's possible that MSVC could be ported to build for a
big-endian architecture again, so the simplification wasn't as
future-proof as hoped.
So let's go back to the old way of detecting MSVC, and then checking
architecture from a list of little-endian architecture macros.
Note that MSVC does not treat ARM64 as bi-endian, so we can safely treat
it as little-endian.
Helped-by: brian m. carlson <sandals@crustytoothpaste.net>
Helped-by: Jeff King <peff@peff.net>
Helped-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Daniel Gurney <dgurney99@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 610e2b9240 (blame: validate and peel the object names on the
ignore list, 2020-09-24) git blame reports checks if objects specified
with --ignore-rev and in files loaded with --ignore-revs-file and config
option blame.ignoreRevsFile are actual objects and dies if they aren't.
The intent is to report typos to the user.
This also breaks the ability to use a single ignore file for multiple
repositories. Typos are presumably less likely in files than on the
command line, so alerting is less useful here. Restore that feature by
skipping non-commits without dying.
Reported-by: Jean-Yves Avenard <jyavenard@mozilla.com>
Signed-off-by: René Scharfe <l.s.r@web.de>
Reviewed-by: Barret Rhoden <brho@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Prepare a test script to transition of the default branch name to
'main'.
* js/default-branch-name-adjust-t5411:
t5411: finish preparing for `main` being the default branch name
t5411: adjust the remaining support files for init.defaultBranch=main
t5411: start adjusting the support files for init.defaultBranch=main
t5411: start using the default branch name "main"
The code to detect premature EOF in the sideband demultiplexer has
been cleaned up.
* jk/sideband-more-error-checking:
sideband: diagnose more sideband anomalies
Exit codes from "git remote add" etc. were not usable by scripted
callers.
* ab/git-remote-exit-code:
remote: add meaningful exit code on missing/existing
A commit and tag object may have CR at the end of each and
every line (you can create such an object with hash-object or
using --cleanup=verbatim to decline the default clean-up
action), but it would make it impossible to have a blank line
to separate the title from the body of the message. Be lenient
and accept a line with lone CR on it as a blank line, too.
* pb/ref-filter-with-crlf:
log, show: add tests for messages containing CRLF
ref-filter: handle CRLF at end-of-line more gracefully
"git checkout-index" did not consistently signal an error with its
exit status.
* jk/checkout-index-errors:
checkout-index: propagate errors to exit code
checkout-index: drop error message from empty --stage=all
"git diff" and other commands that share the same machinery to
compare with working tree files have been taught to take advantage
of the fsmonitor data when available.
* nk/diff-files-vs-fsmonitor:
p7519-fsmonitor: add a git add benchmark
p7519-fsmonitor: refactor to avoid code duplication
perf lint: add make test-lint to perf tests
t/perf: add fsmonitor perf test for git diff
t/perf/p7519-fsmonitor.sh: warm cache on first git status
t/perf/README: elaborate on output format
fsmonitor: use fsmonitor data in `git diff`
More preliminary tests have been added to document desired outcome
of various "directory rename" situations.
* en/dir-rename-tests:
t6423: more involved rules for renaming directories into each other
t6423: update directory rename detection tests with new rule
t6423: more involved directory rename test
directory-rename-detection.txt: update references to regression tests
