This is already handled by the mass GIT_* unsetting added by
95a1d12 (tests: scrub environment of GIT_* variables,
2011-03-15).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In some places we "echo" a string that is supplied by the calling
test script and may contain backslash sequences. The echo command
of some shells, most notably "dash", interprets these backslash
sequences (POSIX.1 allows this) which may scramble the test
output.
Signed-off-by: Uwe Storbeck <uwe@ibr.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow adding a TEST_GIT_INDEX_VERSION variable to config.mak to set the
index version with which the test suite should be run.
If it isn't set, the default version given in the source code is
used (currently version 3).
To avoid breakages with index versions other than [23], also set the
index version under which t2104 is run to 3. This test only tests
functionality specific to version 2 and 3 of the index file and would
fail if the test suite is run with any other version.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The basic test used to leave unnecessary trash directories in the
t/ directory.
* jk/test-framework-updates:
t0000: drop "known breakage" test
t0000: simplify HARNESS_ACTIVE hack
t0000: set TEST_OUTPUT_DIRECTORY for sub-tests
Commit 517cd55 set HARNESS_ACTIVE unconditionally in
sub-tests, because that value affects the output of
"--verbose". t0000 needs stable output from its sub-tests,
and we may or may not be running under a TAP harness.
That commit made the decision to always set the variable,
since it has another useful side effect, which is
suppressing writes to t/test-results by the sub-tests (which
would just pollute the real results).
Since the last commit, though, the sub-tests have their own
test-results directories, so this is no longer an issue. We
can now update a few comments that are no longer accurate
nor necessary.
We can also revisit the choice of HARNESS_ACTIVE. Since we
must choose one value for stability, it's probably saner to
have it off. This means that future patches could test
things like the test-results writing, or the "--quiet"
option, which is currently ignored when run under a harness.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jn/scripts-updates:
remove #!interpreter line from shell libraries
test: replace shebangs with descriptions in shell libraries
test: make FILEMODE a lazy prereq
contrib: remove git-p4import
mark contributed hooks executable
mark perl test scripts executable
mark Windows build scripts executable
In a shell snippet meant to be sourced by other shell scripts, an
opening #! line does more harm than good.
The harm:
- When the shell library is sourced, the interpreter and options from
the #! line are not used. Specifying a particular shell can
confuse the reader into thinking it is safe for the shell library
to rely on idiosyncrasies of that shell.
- Using #! instead of a plain comment drops a helpful visual clue
that this is a shell library and not a self-contained script.
- Tools such as lintian can use a #! line to tell when an
installation script has failed by forgetting to set a script
executable. This check does not work if shell libraries also start
with a #! line.
The good:
- Text editors notice the #! line and use it for syntax highlighting
if you try to edit the installed scripts (without ".sh" suffix) in
place.
The use of the #! for file type detection is not needed because Git's
shell libraries are meant to be edited in source form (with ".sh"
suffix). Replace the opening #! lines with comments.
This involves tweaking the test harness's valgrind support to find
shell libraries by looking for "# " in the first line instead of "#!"
(see v1.7.6-rc3~7, 2011-06-17).
Suggested by Russ Allbery through lintian. Thanks to Jeff King and
Clemens Buchacher for further analysis.
Tested by searching for non-executable scripts with #! line:
find . -name .git -prune -o -type f -not -executable |
while read file
do
read line <"$file"
case $line in
'#!'*)
echo "$file"
;;
esac
done
The only remaining scripts found are templates for shell scripts
(unimplemented.sh, wrap-for-bin.sh) and sample input used in tests
(t/t4034/perl/{pre,post}).
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A #! line in these files is misleading, since these scriptlets are
meant to be sourced with '.' (using whatever shell sources them)
instead of run directly using the interpreter named on the #! line.
Removing the #! line shouldn't hurt syntax highlighting since
these files have filenames ending with '.sh'. For documentation,
add a brief description of how the files are meant to be used in
place of the shebang line.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This way, test authors don't need to remember to source
lib-prereq-FILEMODE.sh before using the FILEMODE prereq to guard tests
that rely on the executable bit being honored when checking out files.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If $TEST_DIRECTORY is specified in the environment, convert the value
to an absolute path to ensure that it remains valid even when 'cd' is
used.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Reviewed-by: Richard Hansen <rhansen@bbn.com>
Signed-off-by: Richard Hansen <rhansen@bbn.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* js/tests-windows-port-fix:
tests: undo special treatment of CRLF for Windows
Windows: a test_cmp that is agnostic to random LF <> CRLF conversions
t5300-pack-object: do not compare binary data using test_cmp
* tr/valgrind-test-fix:
Revert "test-lib: allow prefixing a custom string before "ok N" etc."
Revert "test-lib: support running tests under valgrind in parallel"
Point test writers to the test_expect_* functions properly.
Signed-off-by: Torstein Hegge <hegge@resisty.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a number of tests, output that was produced by a shell script is
compared to expected output using test_cmp. Unfortunately, the MSYS bash--
when invoked via git, such as in hooks--converts LF to CRLF on output
(as produced by echo and printf), which leads to many false positives.
Implements a diff tool that undoes the converted CRLF. To avoid that
sub-processes are spawned (which is very slow on Windows), the tool is
implemented as a shell function. Diff is invoked as usual only when a
difference is detected by the shell code.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that ad0e623 (test-lib: support running tests under valgrind in
parallel, 2013-06-23) has been reverted, this support code has no
users any more. Revert it, too.
This reverts commit e939e15d24.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This reverts commit ad0e623332.
--valgrind-parallel was broken from the start: during review I made
the whole valgrind setup code conditional on not being a
--valgrind-parallel worker child. But even the children crucially
need $GIT_VALGRIND to be set; it should therefore have been set
outside the conditional.
The fix would be a two-liner, but since the introduction of the
feature, almost four months have passed without anyone noticing that
it is broken. So this feature is not worth the about hundred lines of
test-lib.sh complexity. Revert it.
Signed-off-by: Thomas Rast <tr@thomasrast.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When it was originally added, the git_remote_helpers library was used as
part of the tests of the remote-helper interface, but since commit
fc407f9 (Add new simplified git-remote-testgit, 2012-11-28) a simple
shell script is used for this.
A search on Ohloh [1] indicates that this library isn't used by any
external projects and even the Python remote helpers in contrib/ don't
use this library, so it is only used by its own test suite.
Since this is the only Python library in Git, removing it will make
packaging easier as the Python scripts only need to be installed for one
version of Python, whereas the library should be installed for all
available versions.
[1] http://code.ohloh.net/search?s=%22git_remote_helpers%22
Signed-off-by: John Keeping <john@keeping.me.uk>
Acked-by: Sverre Rabbelier <srabbelier@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On systems that understand a CRLF as a line ending, tests in this
script that worked on files with CRLF line endings using "grep" to
extract matching lines may lose the CR at the end of lines that
match, causing the actual output not to match the expected output.
* ml/avoid-using-grep-on-crlf-files:
test-lib.sh - define and use GREP_STRIPS_CR
Define a common macro for grep needing -U to allow tests to not need
to inquire of specific platforms needing this option. Change
t3032 and t5560 to use this rather than testing explicitly for mingw.
This fixes these two tests on Cygwin.
Signed-off-by: Mark Levedahl <mlevedahl@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a command to allow previewing the contents locally before
pushing it out, when working with a MediaWiki remote.
I personally do not think this belongs to Git. If you are working
on a set of AsciiDoc source files, you sure do want to locally
format to preview what you will be pushing out, and if you are
working on a set of C or Java source files, you do want to test it
before pushing it out, too. That kind of thing belongs to your
build script, not to your SCM.
But I'll let it pass, as this is only a contrib/ thing.
* bp/mediawiki-preview:
git-remote-mediawiki: add preview subcommand into git mw
git-remote-mediawiki: add git-mw command
git-remote-mediawiki: factoring code between git-remote-mediawiki and Git::Mediawiki
git-remote-mediawiki: update tests to run with the new bin-wrapper
git-remote-mediawiki: add a git bin-wrapper for developement
wrap-for-bin: make bin-wrappers chainable
git-remote-mediawiki: introduction of Git::Mediawiki.pm
For now, bin-wrappers overwrites GITPERLLIB. If we want to chain to
those scripts and define GITPERLLIB before, our changes will be
discarded.
This patch makes the bin-wrappers prepend their modifications to
GITPERLLIB rather than redefining it. It also unset GITPERLLIB in the
test-suite to prevent broken $GITPERLLIB in the user's configuration
from interfering with the testsuite.
The codes using GIT_TEMPLATE_DIR and GIT_TEXTDOMAINDIR handle only one
path in each of this variable so this new behavior would be useless on
those variables.
Signed-off-by: Benoit Person <benoit.person@ensimag.fr>
Signed-off-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allows N instances of tests run in parallel, each running 1/N parts
of the test suite under Valgrind, to speed things up.
* tr/test-v-and-v-subtest-only:
perf-lib: fix start/stop of perf tests
test-lib: support running tests under valgrind in parallel
test-lib: allow prefixing a custom string before "ok N" etc.
test-lib: valgrind for only tests matching a pattern
test-lib: verbose mode for only tests matching a pattern
test-lib: self-test that --verbose works
test-lib: rearrange start/end of test_expect_* and test_skip
test-lib: refactor $GIT_SKIP_TESTS matching
test-lib: enable MALLOC_* for the actual tests
Do not use FIFOs on cygwin, they do not work. Cygwin includes
coreutils, so has mkfifo, and that command does something. However,
the resultant named pipe is known (on the Cygwin mailing list at
least) to not work correctly.
This disables PIPE for Cygwin, allowing t0008.sh to complete (all other
tests in that file work correctly).
Signed-off-by: Mark Levedahl <mlevedahl@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With the new --valgrind-parallel=<n> option, we support running the
tests in a single test script under valgrind in parallel using 'n'
processes.
This really follows the dumbest approach possible, as follows:
* We spawn the test script 'n' times, using a throw-away
TEST_OUTPUT_DIRECTORY. Each of the instances is given options that
ensures that it only runs every n-th test under valgrind, but
together they cover the entire range.
* We add up the numbers from the individual tests, and provide the
usual output.
This is really a gross hack at this point, and should be improved. In
particular we should keep the actual outputs somewhere more easily
discoverable, and summarize them to the user.
Nevertheless, this is already workable and gives a speedup of more
than 2 on a dual-core (hyperthreaded) machine, using n=4. This is
expected since the overhead of valgrind is so big (on the order of 20x
under good conditions, and a large startup overhead at every git
invocation) that redundantly running the non-valgrind tests in between
is not that expensive.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Thomas Rast <trast@inf.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is not really meant for external use, and thus not documented. It
allows the next commit to neatly distinguish between sub-tests and the
main run.
The format is intentionally not valid TAP. The use in the next commit
would not result in anything valid either way, and it seems better to
make it obvious.
Signed-off-by: Thomas Rast <trast@inf.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With the new --valgrind-only=<pattern> option, one can enable
--valgrind at a per-test granularity, exactly analogous to
--verbose-only from the previous commit.
The options are wired such that --valgrind implies --verbose (as
before), but --valgrind-only=<pattern> implies
--verbose-only=<pattern> unless --verbose is also in effect.
Signed-off-by: Thomas Rast <trast@inf.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With the new --verbose-only=<pattern> option, one can enable --verbose
at a per-test granularity. The pattern is matched against the test
number, e.g.
./t0000-basic.sh --verbose-only='2[0-2]'
to see only the full output of test 20-22, while showing the rest in the
one-liner format.
As suggested by Jeff King, this takes care to wrap the entire
test_expect_* block, but nothing else, in the verbose toggling. We
can use the test_start/end functions from the previous commit for the
purpose.
This is arguably not *too* useful on its own, but makes the next patch
easier to follow.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Thomas Rast <trast@inf.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
t0000 contains some light self-tests of test-lib.sh, but --verbose was
not covered. Add a test.
The only catch is that the presence of a test harness influences the
output (specifically, the presence of some empty lines). So we need
to unset TEST_HARNESS or set it to a known value. Leaving it unset
leads to spurious test failures in the final summary, which come from
the subtest. So we always set it.
Signed-off-by: Thomas Rast <trast@inf.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This moves
* the early setup part from test_skip to a new function test_start_
* the final common parts of test_expect_* to a new function
test_finish_
to make the next commit more obvious.
Signed-off-by: Thomas Rast <trast@inf.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's already used twice, and we will have more of the same kind of
matching in a minute.
Helped-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Thomas Rast <trast@inf.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
1b3185f (MALLOC_CHECK: various clean-ups, 2012-09-14) moved around the
MALLOC_CHECK_ and MALLOC_PERTURB_ assignments, intending to limit
their effect to only the test runs. However, they were actually
enabled only during test cleanup. Call setup/teardown_malloc_check
also around the evaluation of the actual test snippet.
Signed-off-by: Thomas Rast <trast@inf.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When TEST_OUTPUT_DIRECTORY setting is used, it was handled somewhat
inconsistently between the test framework and t/Makefile, and logic
to summarize the results looked at a wrong place.
* jk/test-output:
t/Makefile: don't define TEST_RESULTS_DIRECTORY recursively
test output: respect $TEST_OUTPUT_DIRECTORY
t/Makefile: fix result handling with TEST_OUTPUT_DIRECTORY
Most test results go in $TEST_OUTPUT_DIRECTORY, but the output files for
tests run with --tee or --valgrind just use bare "test-results".
Changes these so that they do respect $TEST_OUTPUT_DIRECTORY.
As a result of this, the valgrind/analyze.sh script may no longer
inspect the correct files so it is also updated to respect
$TEST_OUTPUT_DIRECTORY by adding it to GIT-BUILD-OPTIONS. This may be a
regression for people who have TEST_OUTPUT_DIRECTORY in their config.mak
but want to override it in the environment, but this change merely
brings it into line with GIT_TEST_OPTS which already cannot be
overridden if it is specified in config.mak.
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix longstanding issues with the test harness when used with --root=<there>
option.
* jk/test-trash:
t/test-lib.sh: drop "$test" variable
t/test-lib.sh: fix TRASH_DIRECTORY handling
The $test variable is used as an interim buffer for
constructing $TRASH_DIRECTORY, and is almost compatible with
it (the exception being that $test has not been converted to
an absolute path). Let's get rid of it entirely so that
later code does not accidentally use it, thinking the two
are interchangeable.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After the location of $TRASH_DIRECTORY is adjusted by
$TEST_OUTPUT_DIRECTORY, we go on to use the $test variable to make the
trash directory and cd into it. This means that when
$TEST_OUTPUT_DIRECTORY is not "." and an absolute --root has not been
specified, we do not remove the trash directory once the tests are
complete (remove_trash is set to $TRASH_DIRECTORY).
Fix this by always referring to the trash directory as $TRASH_DIRECTORY.
Signed-off-by: John Keeping <john@keeping.me.uk>
Acked-by: Jeff King <peff@peff.net>
Acked-by: Thomas Rast <trast@inf.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Typo fix: replacing it's -> its
t: make PIPE a standard test prerequisite
archive: clarify explanation of --worktree-attributes
t/README: --immediate skips cleanup commands for failed tests
The 'PIPE' test prerequisite was already defined identically by t9010
and t9300, therefore it makes sense to make it a predefined
prerequisite.
Signed-off-by: Adam Spiers <git@adamspiers.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git archive" reports a failure when asked to create an archive out
of an empty tree. It would be more intuitive to give an empty
archive back in such a case.
* jk/empty-archive:
archive: handle commits with an empty tree
test-lib: factor out $GIT_UNZIP setup
Running tests under helgrind and DRD recently proved useful in
tracking down thread interaction issues. This can unfortunately not
be done through GIT_VALGRIND_OPTIONS because any tool other than
memcheck would complain about unknown options.
Let --valgrind take an optional parameter that describes the valgrind
tool to invoke. The default mode is to run memcheck as before.
Signed-off-by: Thomas Rast <trast@inf.ethz.ch>
Acked-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git archive" reports a failure when asked to create an archive out
of an empty tree. It would be more intuitive to give an empty
archive back in such a case.
* jk/empty-archive:
archive: handle commits with an empty tree
test-lib: factor out $GIT_UNZIP setup
We set up the $GIT_UNZIP variable and lazy prereq in
multiple places (and the next patch is about to add another
one). Let's factor it out to avoid repeating ourselves.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Native windows binaries do not understand posix-like
path mapping offered by cygwin. Convert paths to native
using "cygpath --windows" before presenting them to p4d.
This is done using the AltRoots mechanism of p4. Both the
posix and windows forms are put in the client specification,
allowing p4 to find its location by native path even though
the environment reports a different PWD.
Shell operations in tests will use the normal form of $cli,
which will look like a posix path in cygwin, while p4 will
use AltRoots to match against the windows form of the working
directory.
This mechanism also handles the symlink issue that was fixed in
23bd0c9 (git p4 test: use real_path to resolve p4 client
symlinks, 2012-06-27). Now that every p4 client view has
an AltRoots with the real_path in it, explicitly calculating
the real_path elsewhere is not necessary.
Thanks-to: Sebastian Schuberth <sschuberth@gmail.com>
Thanks-to: Johannes Sixt <j6t@kdbg.org>
fixup! git p4 test: translate windows paths for cygwin
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* rs/zip-tests:
t5003: check if unzip supports symlinks
t5000, t5003: move ZIP tests into their own script
t0024, t5000: use test_lazy_prereq for UNZIP
t0024, t5000: clear variable UNZIP, use GIT_UNZIP instead
These variables are user parameters to control how to run the perf
tests. Allow users to do so.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update zip tests to skip some that cannot be handled on platform
unzip.
* rs/zip-tests:
t5003: check if unzip supports symlinks
t5000, t5003: move ZIP tests into their own script
t0024, t5000: use test_lazy_prereq for UNZIP
t0024, t5000: clear variable UNZIP, use GIT_UNZIP instead
InfoZIP's unzip takes default parameters from the environment variable
UNZIP. Unset it in the test library and use GIT_UNZIP for specifying
alternate versions of the unzip command instead.
t0024 wasn't even using variable for the actual extraction. t5000
was, but when setting it to InfoZIP's unzip it would try to extract
from itself (because it treats the contents of $UNZIP as parameters),
which failed of course.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Output from the tests is coloured using "green is okay, yellow is
questionable, red is bad and blue is informative" scheme.
* as/test-tweaks:
tests: paint unexpectedly fixed known breakages in bold red
tests: test the test framework more thoroughly
tests: refactor mechanics of testing in a sub test-lib
tests: change info messages from yellow/brown to cyan
tests: paint skipped tests in blue
tests: paint known breakages in yellow
tests: test number comes first in 'not ok $count - $message'
Change color of unexpectedly fixed known breakages to bold red. An
unexpectedly passing test indicates that the test code is somehow
broken or out of sync with the code it is testing. Either way this is
an error which is potentially as bad as a failing test, and as such is
no longer portrayed as a pass in the output.
Signed-off-by: Adam Spiers <git@adamspiers.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that we've adopted a "traffic lights" coloring scheme, yellow is
used for warning messages, so we need to re-color info messages to
something less alarmist. Blue is a universal color for informational
messages; however we are using that for skipped tests in order to
align with the color schemes of other test suites. Therefore we use
cyan which is also blue-ish, but visually distinct from blue.
This was suggested on the list a while ago and no-one raised any
objections:
http://thread.gmane.org/gmane.comp.version-control.git/205675/focus=205966
An earlier iteration of this patch used bold cyan, but the point of
this change is to make them less alarming; let's drop the boldness.
Also paint the message to report skipping the whole thing via
GIT_SKIP_TESTS mechanism in the same color as the "info" color
that is used on the final summary line for the entire script.
Signed-off-by: Adam Spiers <git@adamspiers.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Skipped tests indicate incomplete test coverage. Whilst this is not a
test failure or other error, it's still not a complete success.
Other testsuite related software like automake, autotest and prove
seem to use blue for skipped tests, so let's follow suit.
Signed-off-by: Adam Spiers <git@adamspiers.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Yellow seems a more appropriate color than bold green when
considering the universal traffic lights coloring scheme, where
green conveys the impression that everything's OK, and amber that
something's not quite right.
Likewise, change the color of the summarized total number of known
breakages from bold red to the same yellow to be less alarmist and
more consistent with the above.
An earlier version of this patch used bold yellow but because these
are all long-known failures, reminding them to developers in bold
over and over does not help encouraging them to take a look at them
very much. This iteration paints them in plain yellow instead to
make them less distracting.
Signed-off-by: Adam Spiers <git@adamspiers.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The old output to say "not ok - 1 messsage" was working by accident
only because the test numbers are optional in TAP.
Signed-off-by: Adam Spiers <git@adamspiers.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
New remote helper for hg.
* fc/remote-hg: (22 commits)
remote-hg: fix for older versions of python
remote-hg: fix for files with spaces
remote-hg: avoid bad refs
remote-hg: try the 'tip' if no checkout present
remote-hg: fix compatibility with older versions of hg
remote-hg: add missing config for basic tests
remote-hg: the author email can be null
remote-hg: add option to not track branches
remote-hg: add extra author test
remote-hg: add tests to compare with hg-git
remote-hg: add bidirectional tests
test-lib: avoid full path to store test results
remote-hg: add basic tests
remote-hg: fake bookmark when there's none
remote-hg: add compat for hg-git author fixes
remote-hg: add support for hg-git compat mode
remote-hg: match hg merge behavior
remote-hg: make sure the encoding is correct
remote-hg: add support to push URLs
remote-hg: add support for remote pushing
...
The "say" function in the test scaffolding incorrectly allowed
"echo" to interpret "\a" as if it were a C-string asking for a BEL
output.
* jc/test-say-color-avoid-echo-escape:
test-lib: Fix say_color () not to interpret \a\b\c in the message
t7502 checks the behavior of commit when we can and cannot
determine a valid committer ident. Let's move that into
test-lib as a lazy prerequisite so other scripts can use it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
No reason to use the full path in case this is used externally.
Otherwise we might get errors such as:
./test-lib.sh: line 394: /home/bob/dev/git/t/test-results//home/bob/dev/git/contrib/remote-hg/test-2894.counts: No such file or directory
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Recent nd/wildmatch series was the first to reveal this ancient bug
in the test scaffolding.
* jc/test-say-color-avoid-echo-escape:
test-lib: Fix say_color () not to interpret \a\b\c in the message
When running with color disabled (e.g. under prove to produce TAP
output), say_color() helper function is defined to use echo to show
the message. With a message that ends with "\c", echo is allowed to
interpret it as "Do not end the line with LF".
Use printf "%s\n" to emit the message literally.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The malloc checks in tests are currently disabled. Actually evaluate
the variable for turning them off and enable them if it's unset.
Also use this opportunity to give it the more descriptive and
consistent name TEST_NO_MALLOC_CHECK.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Only the first test t0000 in the test suite made sure we have built
Git to be tested; move the check to test-lib so that it applies to
all tests equally.
* rr/test-make-sure-we-have-git:
t/test-lib: make sure Git has already been built
The codepath for handling "--tee" ends up relaunching the test
script under a shell, and that one has to be a Bourne. But we
incorrectly used $SHELL, which could be a non-Bourne (e.g. zsh or
csh); we have the Makefile variable $SHELL_PATH for exactly that,
so use it instead.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When tests were run without building git, they stopped with:
.: 54: Can't open /path/to/git/source/t/../GIT-BUILD-OPTIONS
Move the check that makes sure that git has already been built from
t0000 to test-lib, so that any test will do so before it runs.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The most important in this change is to avoid affecting anything
when test-lib is used from perf-lib. It also limits the effect of
the MALLOC_CHECK only to what is run inside the actual test, and
uses a fixed MALLOC_PERTURB_ in order to avoid hurting repeatability
of the tests.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Recent versions of Linux libc (later than 5.4.23) and glibc (2.x)
include a malloc() implementation which is tunable via environment
variables. When MALLOC_CHECK_ is set, a special (less efficient)
implementation is used which is designed to be tolerant against
simple errors, such as double calls of free() with the same argument,
or overruns of a single byte (off-by-one bugs). When MALLOC_CHECK_
is set to 3, a diagnostic message is printed on stderr
and the program is aborted.
Setting the MALLOC_PERTURB_ environment variable causes the malloc
functions in libc to return memory which has been wiped and clear
memory when it is returned.
Of course this does not affect calloc which always does clear the memory.
The reason for this exercise is, of course, to find code which uses
memory returned by malloc without initializing it and code which uses
code after it is freed. valgrind can do this but it's costly to run.
The MALLOC_PERTURB_ exchanges the ability to detect problems in 100%
of the cases with speed.
The byte value used to initialize values returned by malloc is the byte
value of the environment value. The value used to clear memory is the
bitwise inverse. Setting MALLOC_PERTURB_ to zero disables the feature.
This technique can find hard to detect bugs.
It is therefore suggested to always use this flag (at least temporarily)
when testing out code or a new distribution.
But the test suite can use also valgrind(memcheck) via 'make valgrind'
or 'make GIT_TEST_OPTS="--valgrind"'.
Memcheck wraps client calls to malloc(), and puts a "red zone" on
each end of each block in order to detect access overruns.
Memcheck already detects double free() (up to the limit of the buffer
which remembers pending free()). Thus memcheck subsumes all the
documented coverage of MALLOC_CHECK_.
If MALLOC_CHECK_ is set non-zero when running memcheck, then the
overruns that might be detected by MALLOC_CHECK_ would be overruns
on the wrapped blocks which include the red zones. Thus MALLOC_CHECK_
would be checking memcheck, and not the client. This is not useful,
and actually is wasteful. The only possible [documented] advantage
of using MALLOC_CHECK_ and memcheck together, would be if MALLOC_CHECK_
detected duplicate free() in more cases than memcheck because memcheck's
buffer is too small.
Therefore we don't use MALLOC_CHECK_ and valgrind(memcheck) at the
same time.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* rj/tap-fix:
test-lib.sh: Suppress the "passed all ..." message if no tests run
test-lib.sh: Add check for invalid use of 'skip_all' facility
test-lib.sh: Fix some shell coding style violations
t4016-*.sh: Skip all tests rather than each test
t3902-*.sh: Skip all tests rather than each test
t3300-*.sh: Fix a TAP parse error
If a test script issues a test_done without executing any tests, for
example when using the 'skip_all' facility, the output looks something
like this:
$ ./t9159-git-svn-no-parent-mergeinfo.sh
# passed all 0 test(s)
1..0 # SKIP skipping git svn tests, svn not found
$
The "passed all 0 test(s)" comment line, while correct, looks a little
strange. Add a check to suppress this message if no tests have actually
been run.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'skip_all' facility cannot be used after one or more tests
have been executed using (for example) 'test_expect_success'.
To do so results in invalid TAP output, which leads to 'prove'
complaining of "Parse errors: No plan found in TAP output".
Add a check for such invalid usage and abort the test with an
error message to alert the test author.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
UTF8 behaviour of the filesystem (conversion from nfd to nfc) plays a
role in several tests and is tested in several tests. Therefore, move
the test from t0050 into the test lib and use the prerequisite in t0050.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Case insensitivity plays a role in several tests and is tested in several
tests. Therefore, move the test from t003 into the test lib and use the
prerequisite in t0003.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test prerequisite mechanism is a useful way to allow some tests
in a test script to be skipped in environments that do not support
certain features (e.g. it is pointless to attempt checking how well
symbolic links are handled by Git on filesystems that do not support
them). It is OK for commonly used prerequisites to be always tested
during start-up of a test script by having a codeblock that tests a
feature and calls test_set_prereq, but for an uncommon feature,
forcing 90% of scripts to pay the same probing overhead for
prerequisite they do not care about is wasteful.
Introduce a mechanism to probe the prerequiste lazily. Changes are:
- test_lazy_prereq () function, which takes the name of the
prerequisite it probes and the script to probe for it, is
added. This only registers the name of the prerequiste that can
be lazily probed and the script to eval (without running).
- test_have_prereq() function (which is used by test_expect_success
and also can be called directly by test scripts) learns to look
at the list of prerequisites that can be lazily probed, and the
prerequisites that have already been probed that way. When asked
for a prerequiste that can be but haven't been probed, the script
registered with an earlier call to test_lazy_prereq is evaluated
and the prerequisite is set.
- test_run_lazy_prereq_() function is a helper to run the probe
script with the same kind of sandbox as regular tests, helped by
Jeff King.
Update the codeblock to probe and set SYMLINKS prerequisite using
the new mechanism as an example.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reorders t/test-lib.sh so that we dot-source GIT-BUILD-OPTIONS that
records the shell and Perl the user told us to use with Git a lot
early, so that test-lib.sh script itself can use "$PERL_PATH" in
one of its early operations.
* jc/test-lib-source-build-options-early:
test-lib: reorder and include GIT-BUILD-OPTIONS a lot earlier
Finishing touches to the XDG support (new feature for 1.7.12) and
tests.
* mm/config-xdg:
t1306: check that XDG_CONFIG_HOME works
ignore: make sure we have an xdg path before using it
attr: make sure we have an xdg path before using it
test-lib.sh: unset XDG_CONFIG_HOME
Now that git respects XDG_CONFIG_HOME for some lookups, we
must be sure to cleanse the test environment. Otherwise, the
user's XDG_CONFIG_HOME could influence the test results.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This dot-sources GIT-BUILD-OPTIONS a lot earlier in test-lib.sh so
that its use of "perl" can use "$PERL_PATH" to choose the version of
Perl the user told us is suitable for our use.
This is iffy; I didn't check it very carefully, and I would not be
surprised if there are subtle breakages.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Most notably, t4031 creates a small shell script that invokes perl
and we want to use "$PERL_PATH" to name the version of Perl suitable
for our use, read from GIT-BUILD-OPTS. The test would fail when it
is directly run in t/ directory from the shell or "make" is run in t/
directory.
This problem was hidden from "make test" run in the top-level
directory, because its Makefile exports PERL_PATH.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A broken shell may not let us set an environment value to an arbitrary
value, interfering with some of the tests. Introduce a test prerequisite
so that we can skip some tests on such a platform.
By Zbigniew Jędrzejewski-Szmek
* zj/mksh-columns-breakage:
test-lib: skip test with COLUMNS=1 under mksh
mksh does not allow $COLUMNS to be set below 12. mksh(1) says that
$COLUMNS is "always set, defaults to 80, unless the value as reported
by stty(1) is non-zero and sane enough". This applies also to setting
it directly for one command:
$ COLUMNS=10 python -c 'import os; print os.environ["COLUMNS"]'
98
Add a test prerequisite by checking if we can set COLUMNS=1, to allow
us to skip tests that needs it.
Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
$COLUMNS must be unset to not interfere with the tests. The tests
already ignore the terminal size because output is redirected to a
file, but COLUMNS overrides terminal size detection and changes the
test output away from the standard 80.
Reported-by: Jeff King <peff@peff.net>
Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Update draft release notes to 1.7.9.3 for the last time
http.proxy: also mention https_proxy and all_proxy
t0300: work around bug in dash 0.5.6
t5512 (ls-remote): modernize style
tests: fix spurious error when run directly with Solaris /usr/xpg4/bin/sh
If any test script is run directly with Solaris 10 /usr/xpg4/bin/sh or
/bin/ksh, it fails spuriously with a message like:
t0000-basic.sh[31]: unset: bad argument count
This happens because those shells bail out when encountering a call to
"unset" with no arguments, and such unset call could take place in
'test-lib.sh'. Fix that issue, and add a proper comment to ensure we
don't regress in this respect.
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This introduces a performance testing framework under t/perf/. It
tries to be as close to the test-lib.sh infrastructure as possible,
and thus should be easy to get used to for git developers.
The following points were considered for the implementation:
1. You usually want to compare arbitrary revisions/build trees against
each other. They may not have the performance test under
consideration, or even the perf-lib.sh infrastructure.
To cope with this, the 'run' script lets you specify arbitrary
build dirs and revisions. It even automatically builds the revisions
if it doesn't have them at hand yet.
2. Usually you would not want to run all tests. It would take too
long anyway. The 'run' script lets you specify which tests to run;
or you can also do it manually. There is a Makefile for
discoverability and 'make clean', but it is not meant for
real-world use.
3. Creating test repos from scratch in every test is extremely
time-consuming, and shipping or downloading such large/weird repos
is out of the question.
We leave this decision to the user. Two different sizes of test
repos can be configured, and the scripts just copy one or more of
those (using hardlinks for the object store). By default it tries
to use the build tree's git.git repository.
This is fairly fast and versatile. Using a copy instead of a clone
preserves many properties that the user may want to test for, such
as lots of loose objects, unpacked refs, etc.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This just moves all the user-facing functions to a separate file and
sources that instead.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many of the scripts in the test suite write small helper
shell scripts to disk. It's best if these shell scripts
start with "#!$SHELL_PATH" rather than "#!/bin/sh", because
/bin/sh on some platforms is too buggy to be used.
However, it can be cumbersome to expand $SHELL_PATH, because
the usual recipe for writing a script is:
cat >foo.sh <<-\EOF
#!/bin/sh
echo my arguments are "$@"
EOF
To expand $SHELL_PATH, you have to either interpolate the
here-doc (which would require quoting "\$@"), or split the
creation into two commands (interpolating the $SHELL_PATH
line, but not the rest of the script). Let's provide a
helper function that makes that less syntactically painful.
While we're at it, this helper can also take care of the
"chmod +x" that typically comes after the creation of such a
script, saving the caller a line.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Traditionally, a cleanly resolved merge was committed by "git merge" using
the auto-generated merge commit log message without invoking the editor.
After 5 years of use in the field, it turns out that people perform too
many unjustified merges of the upstream history into their topic branches.
These merges are not just useless, but they are often not explained well,
and making the end result unreadable when it gets time for merging their
history back to their upstream.
Earlier we added the "--edit" option to the command, so that people can
edit the log message to explain and justify their merge commits. Let's
take it one step further and spawn the editor by default when we are in an
interactive session (i.e. the standard input and the standard output are
pointing at the same tty device).
There may be existing scripts that leave the standard input and the
standard output of the "git merge" connected to whatever environment the
scripts were started, and such invocation might trigger the above
"interactive session" heuristics. GIT_MERGE_AUTOEDIT environment variable
can be set to "no" at the beginning of such scripts to use the historical
behaviour while the script runs.
Note that this backward compatibility is meant only for scripts, and we
deliberately do *not* support "merge.edit = yes/no/auto" configuration
option to allow people to keep the historical behaviour.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 781f76b15 (test-lib: redirect stdin of tests) you can't simply put a
"bash &&" into a test for debugging purposes anymore. Instead you'll have
to use "bash <&6 >&3 2>&4".
As that invocation is not that easy to remember add the test_pause
convenience function. It invokes "$SHELL_PATH" to provide a sane shell
for the user.
This function also checks if the -v flag is given and will error out if
that is not the case instead of letting the test hang until ^D is pressed.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We want to run tests in a predictable, sterile environment
so we can get repeatable results. They should take as
little input as possible from the environment outside the
test script. We already sanitize environment variables, but
leave stdin untouched. This means that scripts can
accidentally be impacted by content on stdin, or whether
stdin isatty().
Furthermore, scripts reading from stdin can be annoying to
outer loops which care about their stdin offset, like:
while read sha1; do
make test
done
A test which accidentally reads stdin would soak up all of
the rest of the input intended for the outer shell loop.
Let's redirect stdin from /dev/null, which solves both
of these problems. It won't detect tests accidentally
reading from stdin, but since doing so now gives a
deterministic result, we don't need to consider that an
error.
We'll also leave file descriptor 6 as a link to the original
stdin. Tests shouldn't need to look at this, but it can be
convenient for inserting interactive commands while
debugging tests (e.g., you could insert "bash <&6 >&3 2>&4"
to run interactive commands in the environment of the test
script).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The point of test_config is to simultaneously set a config
variable and register its cleanup handler, like:
test_config core.foo bar
However, it stupidly assumes that $1 contained the name of
the variable, which means it won't work for:
test_config --global core.foo bar
We could try to parse the command-line ourselves and figure
out which parts need to be fed to test_unconfig. But since
this is likely the most common variant, it's much simpler
and less error-prone to simply add a new function.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the skeleton implementation of i18n in Git to one that can show
localized strings to users for our C, Shell and Perl programs using
either GNU libintl or the Solaris gettext implementation.
This new internationalization support is enabled by default. If
gettext isn't available, or if Git is compiled with
NO_GETTEXT=YesPlease, Git falls back on its current behavior of
showing interface messages in English. When using the autoconf script
we'll auto-detect if the gettext libraries are installed and act
appropriately.
This change is somewhat large because as well as adding a C, Shell and
Perl i18n interface we're adding a lot of tests for them, and for
those tests to work we need a skeleton PO file to actually test
translations. A minimal Icelandic translation is included for this
purpose. Icelandic includes multi-byte characters which makes it easy
to test various edge cases, and it's a language I happen to
understand.
The rest of the commit message goes into detail about various
sub-parts of this commit.
= Installation
Gettext .mo files will be installed and looked for in the standard
$(prefix)/share/locale path. GIT_TEXTDOMAINDIR can also be set to
override that, but that's only intended to be used to test Git itself.
= Perl
Perl code that's to be localized should use the new Git::I18n
module. It imports a __ function into the caller's package by default.
Instead of using the high level Locale::TextDomain interface I've
opted to use the low-level (equivalent to the C interface)
Locale::Messages module, which Locale::TextDomain itself uses.
Locale::TextDomain does a lot of redundant work we don't need, and
some of it would potentially introduce bugs. It tries to set the
$TEXTDOMAIN based on package of the caller, and has its own
hardcoded paths where it'll search for messages.
I found it easier just to completely avoid it rather than try to
circumvent its behavior. In any case, this is an issue wholly
internal Git::I18N. Its guts can be changed later if that's deemed
necessary.
See <AANLkTilYD_NyIZMyj9dHtVk-ylVBfvyxpCC7982LWnVd@mail.gmail.com> for
a further elaboration on this topic.
= Shell
Shell code that's to be localized should use the git-sh-i18n
library. It's basically just a wrapper for the system's gettext.sh.
If gettext.sh isn't available we'll fall back on gettext(1) if it's
available. The latter is available without the former on Solaris,
which has its own non-GNU gettext implementation. We also need to
emulate eval_gettext() there.
If neither are present we'll use a dumb printf(1) fall-through
wrapper.
= About libcharset.h and langinfo.h
We use libcharset to query the character set of the current locale if
it's available. I.e. we'll use it instead of nl_langinfo if
HAVE_LIBCHARSET_H is set.
The GNU gettext manual recommends using langinfo.h's
nl_langinfo(CODESET) to acquire the current character set, but on
systems that have libcharset.h's locale_charset() using the latter is
either saner, or the only option on those systems.
GNU and Solaris have a nl_langinfo(CODESET), FreeBSD can use either,
but MinGW and some others need to use libcharset.h's locale_charset()
instead.
=Credits
This patch is based on work by Jeff Epler <jepler@unpythonic.net> who
did the initial Makefile / C work, and a lot of comments from the Git
mailing list, including Jonathan Nieder, Jakub Narebski, Johannes
Sixt, Erik Faye-Lund, Peter Krefting, Junio C Hamano, Thomas Rast and
others.
[jc: squashed a small Makefile fix from Ramsay]
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since bc7a96a (mergetool--lib: Refactor tools into separate files,
2011-08-18) the mergetools and difftools related tests fail under
--valgrind because the mergetools/* scriptlets are not in the exec
path.
For now, symlink the mergetools subdir into the t/valgrind/bin
directory as a whole, since it does not contain anything of interest
to the valgrind wrappers.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jk/color-and-pager:
want_color: automatically fallback to color.ui
diff: don't load color config in plumbing
config: refactor get_colorbool function
color: delay auto-color decision until point of use
git_config_colorbool: refactor stdout_is_tty handling
diff: refactor COLOR_DIFF from a flag into an int
setup_pager: set GIT_PAGER_IN_USE
t7006: use test_config helpers
test-lib: add helper functions for config
t7006: modernize calls to unset
Conflicts:
builtin/commit.c
parse-options.c
There are a few common tasks when working with configuration
variables in tests; this patch aims to make them a little
easier to write and less error-prone.
When setting a variable, you should typically make sure to
clean it up after the test is finished, so as not to pollute
other tests. Like:
test_when_finished 'git config --unset foo.bar' &&
git config foo.bar baz
This patch lets you just write:
test_config foo.bar baz
When clearing a variable that does not exist, git-config
will report a specific non-zero error code. Meaning that
tests which call "git config --unset" often either rely on
the prior tests having actually set it, or must use
test_might_fail. With this patch, the previous:
test_might_fail git config --unset foo.bar
becomes:
test_unconfig foo.bar
Not only is this easier to type, but it is more robust; it
will correctly detect errors from git-config besides "key
was not set".
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As we seem to need this variable that holds a single LF character
in many places, define it in test-lib.sh and let the test scripts
use it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In olden times, tests would quietly exit the script when they failed
at an inconvenient moment, which was a little disconcerting.
Therefore v0.99.5~24^2~4 (Trapping exit in tests, using return for
errors, 2005-08-10) switched to an idiom of using "return" instead,
wrapping evaluation of test code in a function to make that safe:
test_run_ () {
eval >&3 2>&4 "$1"
eval_ret="$?"
return 0
}
Years later, the implementation of test_when_finished (v1.7.1.1~95,
2010-05-02) and v1.7.2-rc2~1^2~13 (test-lib: output a newline before
"ok" under a TAP harness, 2010-06-24) took advantage of test_run_ as a
place to put code shared by all test assertion functions, without
paying attention to the function's former purpose:
test_run_ () {
...
eval >&3 2>&4 "$1"
eval_ret=$?
if should run cleanup
then
eval >&3 2>&4 "$test_cleanup"
fi
if TAP format requires a newline here
then
echo
fi
return 0
}
That means cleanup commands and the newline to put TAP output at
column 0 are skipped when tests use "return" to fail early. Fix it by
introducing a test_eval_ function to catch the "return", with a
comment explaining the new function's purpose for the next person who
might touch this code.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As v0.99.5~24^2~4 (Trapping exit in tests, using return for errors,
2005-08-10) explains, callers to test_run_ (such as test_expect_code)
used to check the result from eval and the return value separately so
tests that fail early could be distinguished from tests that completed
normally with successful (nonzero) status. Eventually tests that
succeed with nonzero status were phased out (see v1.7.4-rc0~65^2~19,
2010-10-03 and especially v1.5.5-rc0~271, 2008-02-01) but the weird
two-return-value calling convention lives on.
Let's get rid of it. The new rule: test_run_ succeeds (returns 0)
if and only if the test succeeded.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some tests try to be too careful about cleaning themselves up and
do
test_expect_success description '
set-up some test refs and/or configuration &&
test_when_finished "revert the above changes" &&
the real test
'
Which is nice to make sure that a potential failure would not have
unexpected interaction with the next test. This however interferes when
"the real test" fails and we want to see what is going on, by running the
test with --immediate mode and descending into its trash directory after
the test stops. The precondition to run the real test and cause it to fail
is all gone after the clean-up procedure defined by test_when_finished is
done.
Update test_run_ which is the workhorse of running a test script
called from test_expect_success and test_expect_failure, so that we do not
run clean-up script defined with test_when_finished when a test that is
expected to succeed fails under the --immediate mode.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Acked-by: Jeff King <peff@peff.net>
When we run tests under valgrind, we symlink anything
executable that starts with git-* or test-* into a special
valgrind bin directory, and then make that our
GIT_EXEC_PATH.
However, shell libraries like git-sh-setup do not have the
executable bit marked, and did not get symlinked. This
means that any test looking for shell libraries in our
exec-path would fail to find them, even though that is a
fine thing to do when testing against a regular git build
(or in a git install, for that matter).
t2300 demonstrated this problem. The fix is to symlink these
shell libraries directly into the valgrind directory.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ab/i18n-fixup: (24 commits)
i18n: use test_i18n{cmp,grep} in t7600, t7607, t7611 and t7811
i18n: use test_i18n{grep,cmp} in t7508
i18n: use test_i18ngrep in t7506
i18n: use test_i18ngrep and test_i18ncmp in t7502
i18n: use test_i18ngrep in t7501
i18n: use test_i18ncmp in t7500
i18n: use test_i18ngrep in t7201
i18n: use test_i18ncmp and test_i18ngrep in t7102 and t7110
i18n: use test_i18ncmp and test_i18ngrep in t5541, t6040, t6120, t7004, t7012 and t7060
i18n: use test_i18ncmp and test_i18ngrep in t3700, t4001 and t4014
i18n: use test_i18ncmp and test_i18ngrep in t3203, t3501 and t3507
i18n: use test_i18ngrep in t2020, t2204, t3030, and t3200
i18n: use test_i18ngrep in lib-httpd and t2019
i18n: do not overuse C_LOCALE_OUTPUT (grep)
i18n: use test_i18ncmp in t1200 and t2200
i18n: .git file is not a human readable message (t5601)
i18n: do not overuse C_LOCALE_OUTPUT
i18n: mark init-db messages for translation
i18n: mark checkout plural warning for translation
i18n: mark checkout --detach messages for translation
...
* mk/grep-pcre:
git-grep: Fix problems with recently added tests
git-grep: Update tests (mainly for -P)
Makefile: Pass USE_LIBPCRE down in GIT-BUILD-OPTIONS
git-grep: update tests now regexp type is "last one wins"
git-grep: do not die upon -F/-P when grep.extendedRegexp is set.
git-grep: Bail out when -P is used with -F or -E
grep: Add basic tests
configure: Check for libpcre
git-grep: Learn PCRE
grep: Extract compile_regexp_failed() from compile_regexp()
grep: Fix a typo in a comment
grep: Put calls to fixmatch() and regmatch() into patmatch()
contrib/completion: --line-number to git grep
Documentation: Add --line-number to git-grep synopsis
* jn/userdiff-perl-updates:
userdiff/perl: tighten BEGIN/END block pattern to reject here-doc delimiters
tests: make test_expect_code quieter on success
userdiff/perl: catch sub with brace on second line
userdiff/perl: match full line of POD headers
userdiff/perl: anchor "sub" and "package" patterns on the left
t4018 (funcname patterns): minor cleanups
t4018 (funcname patterns): make configuration easier to track
t4018 (funcname patterns): make .gitattributes state easier to track
A command exiting with the expected status is not particularly
notable.
While the indication of progress might be useful when tracking down
where in a test a failure has happened, the same applies to most other
test helpers, which are quiet about success, so this single helper's
output stands out in an unpleasant way. An alternative method for
showing progress information might to invent a --progress option that
runs tests with "set -x", or until that is available, to run tests
using commands like
prove -v -j2 --shuffle --exec='sh -x' t2202-add-addremove.sh
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/fix-diff-files-unmerged:
diff-files: show unmerged entries correctly
diff: remove often unused parameters from diff_unmerge()
diff.c: return filepair from diff_unmerge()
test: use $_z40 from test-lib
This modest patch adds simple tests for git grep -P/--perl-regexp and
its interoperation with -i and -w.
Tests are only enabled when prerequisite LIBPCRE is defined (it's
automatically set based on USE_LIBPCRE in test-lib.sh).
Signed-off-by: Michał Kiedrowicz <michal.kiedrowicz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/fix-diff-files-unmerged:
diff-files: show unmerged entries correctly
diff: remove often unused parameters from diff_unmerge()
diff.c: return filepair from diff_unmerge()
test: use $_z40 from test-lib
* ab/i18n-fixup: (24 commits)
i18n: use test_i18n{cmp,grep} in t7600, t7607, t7611 and t7811
i18n: use test_i18n{grep,cmp} in t7508
i18n: use test_i18ngrep in t7506
i18n: use test_i18ngrep and test_i18ncmp in t7502
i18n: use test_i18ngrep in t7501
i18n: use test_i18ncmp in t7500
i18n: use test_i18ngrep in t7201
i18n: use test_i18ncmp and test_i18ngrep in t7102 and t7110
i18n: use test_i18ncmp and test_i18ngrep in t5541, t6040, t6120, t7004, t7012 and t7060
i18n: use test_i18ncmp and test_i18ngrep in t3700, t4001 and t4014
i18n: use test_i18ncmp and test_i18ngrep in t3203, t3501 and t3507
i18n: use test_i18ngrep in t2020, t2204, t3030, and t3200
i18n: use test_i18ngrep in lib-httpd and t2019
i18n: do not overuse C_LOCALE_OUTPUT (grep)
i18n: use test_i18ncmp in t1200 and t2200
i18n: .git file is not a human readable message (t5601)
i18n: do not overuse C_LOCALE_OUTPUT
i18n: mark init-db messages for translation
i18n: mark checkout plural warning for translation
i18n: mark checkout --detach messages for translation
...
Apply parameter expansion. Also use here document to save
test results instead of appending each line with ">>".
Signed-off-by: Mathias Lafeldt <misfire@debugon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is no need to duplicate the definition of $_z40 and $_x40 that
test-lib.sh supplies the test scripts.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of skipping the whole test, introduce test_i18ngrep wrapper that
pretends a successful result under GETTEXT_POISON build.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is too coarse-grained way that led to artificial splitting of a
logically single test case into "do" and "check only without poison".
As the majority of check is done by comparing expected and actual output
stored in a file with test_cmp anyway, just introduce test_i18ncmp that
pretends the actual output matched the expected one when gettext-poison
is in effect.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Otherwise the created test repositories will be affected by users ~/.gitconfig.
For example, setting core.logAllrefupdates in users config will make all
calls to "git config --unset core.logAllrefupdates" fail which will break
the first test which uses the statement and expects it to succeed.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In commit 95a1d12e9b ("tests: scrub environment of GIT_* variables") all
environment variables starting with "GIT_" were unset for the tests using
a perl script rather than unsetting them one by one. Only three exceptions
were made to make them work as before: "GIT_TRACE*", "GIT_DEBUG*" and
"GIT_USE_LOOKUP".
Unfortunately some environment variables used by the test framework itself
were not added to the exceptions and thus stopped working when given
before the make command instead of after it. Those are:
- GIT_NOTES_TIMING_TESTS
- GIT_PATCHID_TIMING_TESTS
- GIT_PROVE_OPTS
- GIT_REMOTE_SVN_TEST_BIG_FILES
- GIT_SKIP_TESTS
- GIT_TEST*
- GIT_VALGRIND_OPTIONS
I noticed that when skipping a test the way I was used to suddenly failed:
GIT_SKIP_TESTS='t1234' GIT_TEST_OPTS='--root=/dev/shm' make -j10 test
This should work according to t/README, but didn't anymore, so let's fix
that by adding them to the exception list. And to avoid having a long
regexp put the exceptions in a separate variable using nicer formatting.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Acked-by: Jonathan Nieder <jrnieder@gmail.com>
Thanks-to: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jn/test-sanitize-git-env:
tests: scrub environment of GIT_* variables
config: drop support for GIT_CONFIG_NOGLOBAL
gitattributes: drop support for GIT_ATTR_NOGLOBAL
tests: suppress system gitattributes
tests: stop worrying about obsolete environment variables
Variables from the inherited environment that are meaningful to git
can break tests in undesirable ways. For example,
GIT_PAGER=more sh t5400-send-pack.sh -v -i
hangs. So unset all environment variables in the GIT_ namespace in
test-lib, with a few exceptions:
- GIT_TRACE* are useful for tracking down bugs exhibited by a failing
test;
- GIT_DEBUG* are GIT_TRACE variables by another name, practically
speaking. They should probably be tweaked to follow the
GIT_TRACE_foo scheme and use trace_printf machinery some time.
- GIT_USE_LOOKUP from v1.5.6-rc0~134^2~1 (sha1-lookup: more memory
efficient search in sorted list of SHA-1, 2007-12-29) is about
trying an alternate implementation strategy rather than changing
semantics and it can be useful to compare performance with and
without it set.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that test-lib sets $HOME to protect against pollution from user
settings, GIT_CONFIG_NOGLOBAL is not needed for use by the test
suite any more. And as luck would have it, a quick code search
reveals no other users in the wild.
This patch does not affect GIT_CONFIG_NOSYSTEM, which is still
needed.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Set GIT_ATTR_NOSYSTEM in test-lib to make tests more reliable in two
ways:
- an invalid GIT_ATTR_NOSYSTEM setting should not cause tests to fail
with "fatal: bad config value for 'GIT_ATTR_NOSYSTEM'".
- /etc/gitattributes should not change the outcome of tests.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Improved-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After v0.99.7~99 (Retire support for old environment variables,
2005-09-09), there is no more need to unset a stray AUTHOR_NAME
variable that might have entered the test environment.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Tweak the GETTEXT_POISON facility so it is activated at run time
instead of compile time. If the GIT_GETTEXT_POISON environment
variable is set, _(msg) will result in gibberish as before; but if the
GIT_GETTEXT_POISON variable is not set, it will return the message for
human-readable output. So the behavior of mistranslated and
untranslated git can be compared without rebuilding git in between.
For simplicity we always set the GIT_GETTEXT_POISON variable in tests.
This does not affect builds without the GETTEXT_POISON compile-time
option set, so non-i18n git will not be slowed down.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a new GETTEXT_POISON compile-time parameter to make _(msg) always
return gibberish. So now you can run
make GETTEXT_POISON=YesPlease
to get a copy of git that functions correctly (one hopes) but produces
output that is in nobody's native language at all.
This is a debugging aid for people who are working on the i18n part of
the system, to make sure that they are not marking plumbing messages
that should never be translated with _().
As new strings get marked for translation, naturally a number of tests
will be broken in this mode. Tests that depend on output from
Porcelain will need to be marked with the new C_LOCALE_OUTPUT test
prerequisite. Newly failing tests that do not depend on output from
Porcelain would be bugs due to messages that should not have been
marked for translation.
Note that the string we're using ("# GETTEXT POISON #") intentionally
starts the pound sign. Some of Git's tests such as
t3404-rebase-interactive.sh rely on interactive editing with a fake
editor, and will needlessly break if the message doesn't start with
something the interactive editor considers a comment.
A future patch will fix fix the underlying cause of that issue by
adding "#" characters to the commit advice automatically.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
rebase -i: clarify in-editor documentation of "exec"
tests: sanitize more git environment variables
fast-import: treat filemodify with empty tree as delete
rebase: give a better error message for bogus branch
rebase: use explicit "--" with checkout
Conflicts:
t/t9300-fast-import.sh
These variables should generally not be set in one's
environment, but they do get set by rebase, which means
doing an interactive rebase like:
pick abcd1234 foo
exec make test
will cause false negatives in the test suite.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* rj/test-fixes:
t4135-*.sh: Skip the "backslash" tests on cygwin
t3032-*.sh: Do not strip CR from line-endings while grepping on MinGW
t3032-*.sh: Pass the -b (--binary) option to sed on cygwin
t6038-*.sh: Pass the -b (--binary) option to sed on cygwin
Conflicts:
t/t3032-merge-recursive-options.sh
The BSLASHPSPEC tests (11-13) fail on cygwin, since you can't
create files containing an backslash character in the name.
In order to skip these tests, we simply stop (incorrectly)
asserting the BSLASHPSPEC prerequisite in test-lib.sh.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Acked-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The tests using the fuzz_conflict helper function (tests 5-6)
fail on cygwin in the same way they used to on MinGW, prior
to commit ca02ad3. The solution is also the same; passing the
-b (--binary) option to sed, using the SED_OPTIONS variable.
We introduce a new prerequisite SED_STRIPS_CR to use in the
conditional initialisation of SED_OPTIONS, rather than MINGW.
The new prerequisite is set in test-lib.sh for both MinGW and
Cygwin.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Acked-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
POSIX awk seems to explicitly not support hexadecimal escape sequences.
From http://pubs.opengroup.org/onlinepubs/009695399/:
Regular expressions in awk have been extended somewhat...
One sequence that is not supported is hexadecimal value escapes
beginning with '\x'.
This affects the awk on IRIX 6.5, and causes t4015.56 to fail.
Use octal instead.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jk/push-progress:
push: pass --progress down to git-pack-objects
t5523-push-upstream: test progress messages
t5523-push-upstream: add function to ensure fresh upstream repo
test_terminal: ensure redirections work reliably
test_terminal: catch use without TTY prerequisite
test-lib: allow test code to check the list of declared prerequisites
tests: test terminal output to both stdout and stderr
tests: factor out terminal handling from t7006
Some tests check their output with code like the following:
test "$(git ls-files -u B | wc -l)" -eq 3 || {
echo "BAD: should have left stages for B"
return 1
}
The verbose failure condition is used because test, unlike
diff, does not print any useful information about the
nature of the failure when it fails.
Introduce a test_line_count function to help. If used like
git ls-files -u B >output &&
test_line_count -eq 3 output
it will produce output like
test_line_count: line count for output !-eq 3
100644 b023018cabc396e7692c70bbf5784a93d3f738ab 2 hi.c
100644 45b983be36b73c0788dc9cbcb76cbb80fc7bb057 3 hi.c
on failure.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Enhance the test_decode_color function to handle all common color codes,
including background colors and escapes that contain multiple codes.
This change necessitates changing <WHITE> to <BOLD>, so update t4034
as well.
This change is necessary for the next commit in order to test
background colors properly.
Signed-off-by: Kevin Ballard <kevin@sb.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is plumbing to prepare helpers like test_terminal to notice buggy
test scripts that do not declare all of the necessary prerequisites.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code paths for showing commits in "git log" and "git
rev-list --graph" correctly handle embedded NULs by looking
only at the resulting strbuf's length, and never treating it
as a C string. The code path for regular rev-list, however,
used printf("%s"), which resulted in truncated output. This
patch uses fwrite instead, like the --graph code path.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change test_expect_code to be a normal test command instead of a
top-level command.
As a top-level command it would fail in cases like:
test_expect_code 1 'phoney' '
foo && bar && (exit 1)
'
Here the test might incorrectly succeed if "foo" or "bar" happened to
fail with exit status 1. Instead we now do:
test_expect_success 'phoney' '
foo && bar && test_expect_code 1 "(exit 1)"
'
Which will only succeed if "foo" and "bar" return status 0, and "(exit
1)" returns status 1. Note that test_expect_code has been made slightly
noisier, as it reports the exit code it receives even upon success.
Some test code in t0000-basic.sh relied on the old semantics of
test_expect_code to test the test_when_finished command. I've
converted that code to use an external test similar to the TODO test I
added in v1.7.3-rc0~2^2~3.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By default, MSYS grep reads in text-mode and converts CRLF into LF line
endings. For testing HTTP use binary mode (-U) as checking is done for
CR in HTTP headers
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Pat Thoyts <patthoyts@users.sourceforge.net>
These two tests fail on msysGit because /dev/null is an alias for nul on
Windows and when reading the value back from git config the alias does
not match the real filename. Also the HOME environment variable has a
unix-style path but git returns a native equivalent path for '~'. As
these are platform-dependent equivalent results it seems simplest to
skip the test entirely.
Moves the NOT_MINGW prereq from t5503 into the test library.
Signed-off-by: Pat Thoyts <patthoyts@users.sourceforge.net>
* jk/test-must-fail-missing:
tests: make test_might_fail fail on missing commands
tests: make test_might_fail more verbose
tests: make test_must_fail fail on missing commands
tests: make test_must_fail more verbose
* ab/test-2: (51 commits)
tests: factor HOME=$(pwd) in test-lib.sh
test-lib: use subshell instead of cd $new && .. && cd $old
tests: simplify "missing PREREQ" message
t/t0000-basic.sh: Run the passing TODO test inside its own test-lib
test-lib: Allow overriding of TEST_DIRECTORY
test-lib: Use "$GIT_BUILD_DIR" instead of "$TEST_DIRECTORY"/../
test-lib: Use $TEST_DIRECTORY or $GIT_BUILD_DIR instead of $(pwd) and ../
test: Introduce $GIT_BUILD_DIR
cvs tests: do not touch test CVS repositories shipped with source
t/t9602-cvsimport-branches-tags.sh: Add a PERL prerequisite
t/t9601-cvsimport-vendor-branch.sh: Add a PERL prerequisite
t/t7105-reset-patch.sh: Add a PERL prerequisite
t/t9001-send-email.sh: convert setup code to tests
t/t9001-send-email.sh: change from skip_all=* to prereq skip
t/t9001-send-email.sh: Remove needless PROG=* assignment
t/t9600-cvsimport.sh: change from skip_all=* to prereq skip
lib-patch-mode tests: change from skip_all=* to prereq skip
t/t3701-add-interactive.sh: change from skip_all=* to prereq skip
tests: Move FILEMODE prerequisite to lib-prereq-FILEMODE.sh
t/Makefile: Create test-results dir for smoke target
...
Conflicts:
t/t6035-merge-dir-to-symlink.sh
The same pattern is used in many tests, and makes it easy for new ones to
rely on $HOME being a trashable, clean, directory.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the test_create_repo code added in v1.2.2~6 to use a subshell
instead of keeping track of the old working directory and cd-ing back
when it's done.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a test has no prerequisites satisfied (the usual case), instead
of "missing THING of THING", just say "missing THING". This does not
affect the output when a test is skipped due to a missing
prerequisites if another prerequisite is satisfied.
For example: instead of
ok 8 # skip notes work (missing EXPENSIVE of EXPENSIVE)
ok 9 # skip notes timing with /usr/bin/time (missing EXPENSIVE of USR_BIN_TIME,EXPENSIVE)
write
ok 8 # skip notes work (missing EXPENSIVE)
ok 9 # skip notes timing with /usr/bin/time (missing EXPENSIVE of USR_BIN_TIME,EXPENSIVE)
Cc: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Tests that test the test-lib.sh itself need to be executed in the
dynamically created trash directory, so we can't assume
$TEST_DIRECTORY is ../ for those.
As a side benefit this change also makes it easy for us to move the
t/*.sh tests into subdirectories if we ever want to do that.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change code that used $TEST_DIRECTORY/.. to use $GIT_BUILD_DIR
instead, the two are equivalent, but the latter is easier to read.
This required moving the assignment od GIT_BUILD_DIR to earlier in the
test-lib.sh file.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the redundant calls to $(pwd) to use $TEST_DIRECTORY
instead. None of these were being executed after we cd'd somewhere
else so they weren't actually needed.
This also makes it easier to add support for overriding the test
library location and run tests in a different directory than t/.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce a new variable $GIT_BUILD_DIR which can be used to locate
data that resides under the build directory, and use that instead.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Detect and report hard-to-notice spelling mistakes like
test_might_fail "git config --unset whatever"
(the extra quotes prevent the shell from running git as intended;
instead, the shell looks for a "git config --unset whatever" file).
Cc: Jeff King <peff@peff.net>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Let test_might_fail say something about its failures for consistency
with test_must_fail.
Cc: Jeff King <peff@peff.net>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The point of it is to run a command that produces failure. A
missing command is more likely an error in the test script
(e.g., using 'test_must_fail "command with arguments"', or
relying on a missing command).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Because test_must_fail fails when a command succeeds, the
command frequently does not produce any output (since, after
all, it thought it was succeeding). So let's have
test_must_fail itself report that a problem occurred.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mm/rebase-i-exec:
git-rebase--interactive.sh: use printf instead of echo to print commit message
git-rebase--interactive.sh: rework skip_unnecessary_picks
test-lib: user-friendly alternatives to test [-d|-f|-e]
rebase -i: add exec command to launch a shell command
Conflicts:
git-rebase--interactive.sh
t/t3404-rebase-interactive.sh
The support for multiple test prerequisites added by me in "test-lib:
Add support for multiple test prerequisites" was broken.
The for iterated over each prerequisite and returned true/false within
a case statement, but since it missed a return statement only the last
prerequisite in the list of prerequisites was ever considered, the
rest were ignored.
Fix that by changing the test_have_prereq code to something less
clever that keeps a count of the total prereqs and the ones we have
and compares the count at the end.
This comes with the added advantage that it's easy to list the missing
prerequisites in the test output, implement that while I'm at it.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some tests depend on not being able to write to files after chmod
-w. This doesn't work when running the tests as root.
Change test-lib.sh to test if this works, and if so it sets a new
SANITY test prerequisite. The tests that use this previously failed
when run under root.
There was already a test for this in t3600-rm.sh, added by Junio C
Hamano in 2283645 in 2006. That check now uses the new SANITY
prerequisite.
Some of this was resurrected from the "Tests in Cygwin" thread in May
2009:
http://thread.gmane.org/gmane.comp.version-control.git/116729/focus=118385
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the test output to print needed prerequisites as part of the
TAP. This makes it easy to see at a glance why a test was
skipped. Before:
ok 7 # skip <message>
ok 9 # skip <message>
After:
ok 7 # skip <message> (prereqs: DONTHAVEIT)
ok 9 # skip <message> (prereqs: HAVEIT,DONTHAVEIT)
This'll also be useful for smoke testing output, where the developer
reading the output may not be familiar with the system where tests are
being skipped.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the test_have_prereq function in test-lib.sh to support a
comma-separated list of prerequisites. This is useful for tests that
need e.g. both POSIXPERM and SANITY.
The implementation was stolen from Junio C Hamano and Johannes Sixt,
the tests and documentation were not. See the "Tests in Cygwin" thread
in May 2009 for the originals:
http://thread.gmane.org/gmane.comp.version-control.git/116729/focus=118385http://thread.gmane.org/gmane.comp.version-control.git/116729/focus=118434
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
TAP harnesses don't need to read test-results/*, since they keep track
of the number of passing/failing tests internally. Skip the generation
of these files when HARNESS_ACTIVE is set.
It's now possible to run the Git test suite without writing anything
to the t/ directory at all if you use a TAP harness and the --root
switch:
cd t
sudo mount -t tmpfs none /tmp/memory -o size=300m
prove -j9 ./t[0-9]*.sh :: --root=/tmp/memory
The I/O that the ~500 test-results/* files contributed was very
minimal, but I thought this was worth mentioning.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The helper functions are implemented, documented, and used in a few
places to validate them, but not everywhere to avoid useless code churn.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --no-python option was added to test-lib.sh by Johannes Schindelin
in early 2006 in abb7c7b3. It was later turned into a no-op by Junio C
Hamano in 7cdbff14 the same year.
Over three years is long enough before removing this old wart which
was retained for backwards compatibility. Our tests have been using
NO_PYTHON and "test_have_prereq PYTHON" for a long time now.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Running the tests with --quiet under a TAP harness will always fail,
since a TAP harness always needs actual test output to go along with
the plan that's being emitted.
Change the test-lib.sh to ignore the --quiet option under
HARNESS_ACTIVE to work around this. Then users that have --quiet in
their GIT_TEST_OPTS can run tests under prove(1) without everything
breaking.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Place setup commands in test_expect_success blocks. This makes the
rare event of the setup commands breaking on some platform easier to
diagnose, and more importantly, it visually distinguishes where
each test begins and ends.
Instead of running test -z against the result of "git diff" command
substitution, use "git diff --exit-code", to improve output when
running with the "-v" option.
Use test_cmp in place of "test $(foo) = $(bar)" for similar reasons.
Remove whitespace after the > and < redirection operators for
consistency with other tests.
The order of arguments to test_cmp is "test_cmp expected actual".
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current make target 'aggregate-results' scanned all files matching
test-results/t*-*. Normally these are only the test counts (and the
exit values, which are ignored), but with --tee the suite also dumps
all output. Furthermore, with --verbose t1450 contains several lines
starting with "broken link from ..." which matches the criteria used
by aggregate-results.sh.
Rename the counts output files to *.counts, and only scan those.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Acked-by: Sverre Rabbelier <srabbelier@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make the output TAP compliant for tests skipped on request (GIT_SKIP_TESTS).
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Acked-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
04ece59 (GIT_SKIP_TESTS: allow users to omit tests that are known to break, 2006-12-28)
introduced GIT_SKIP_TESTS, and since then we have had two nested loops
iterating over GIT_SKIP_TESTS with the same loop variable.
Reduce this to one loop.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some tests in the testsuite will emit a line that doesn't end with a
newline, right before we're about to output "ok" or "not ok". This
breaks the TAP output with "Tests out of sequence" errors since a TAP
harness can't understand this:
ok 1 - A test
[some output here]ok 2 - Another test
ok 3 - Yet another test
Work around it by emitting an empty line before we're about to say
"ok" or "not ok", but only if we're running under --verbose and
HARNESS_ACTIVE=1 is set, which'll only be the case when running under
a harnesses like prove(1).
I think it's better to do this than fix each tests by adding `&& echo'
everywhere. More tests might be added that break TAP in the future,
and a human isn't going to look at the extra whitespace, since
HARNESS_ACTIVE=1 always means a harness is reading it.
The tests that had issues were:
t1007, t3410, t3413, t3409, t3414, t3415, t3416, t3412, t3404,
t5407, t7402, t7003, t9001
With this workaround the entire test suite runs without errors under:
prove -j 10 ./t[0-9]*.sh :: --verbose
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before TAP we just ran the Perl test and assumed that it failed if
nothing was printed on STDERR. Continue doing that, but introduce a
`test_external_has_tap' variable which tests can set to indicate that
they're outputting TAP.
If it's set we won't output a test plan, but trust the external test
to do so. That way we can make external tests work with a TAP harness,
but still maintain compatibility with test-lib's own way of tracking
tests through the test-results directory.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
TAP, the Test Anything Protocol, is a simple text-based interface
between testing modules in a test harness. test-lib.sh's output was
already very close to being valid TAP. This change brings it all the
way there. Before:
$ ./t0005-signals.sh
* ok 1: sigchain works
* passed all 1 test(s)
And after:
$ ./t0005-signals.sh
ok 1 - sigchain works
# passed all 1 test(s)
1..1
The advantage of using TAP is that any program that reads the format
(a "test harness") can run the tests. The most popular of these is the
prove(1) utility that comes with Perl. It can run tests in parallel,
display colored output, format the output to console, file, HTML etc.,
and much more. An example:
$ prove ./t0005-signals.sh
./t0005-signals.sh .. ok
All tests successful.
Files=1, Tests=1, 0 wallclock secs ( 0.03 usr 0.00 sys + 0.01 cusr 0.02 csys = 0.06 CPU)
Result: PASS
prove(1) gives you human readable output without being too
verbose. Running the test suite in parallel with `make test -j15`
produces a flood of text. Running them with `prove -j 15 ./t[0-9]*.sh`
makes it easy to follow what's going on.
All this patch does is re-arrange the output a bit so that it conforms
with the TAP spec, everything that the test suite did before continues
to work. That includes aggregating results in t/test-results/, the
--verbose, --debug and other options for tests, and the test color
output.
TAP harnesses ignore everything that they don't know about, so running
the tests with --verbose works:
$ prove ./t0005-signals.sh :: --verbose --debug
./t0005-signals.sh .. Terminated
./t0005-signals.sh .. ok
All tests successful.
Files=1, Tests=1, 0 wallclock secs ( 0.02 usr 0.01 sys + 0.01 cusr 0.01 csys = 0.05 CPU)
Result: PASS
Just supply the -v option to prove itself to get all the verbose
output that it suppresses:
$ prove -v ./t0005-signals.sh :: --verbose --debug
./t0005-signals.sh ..
Initialized empty Git repository in /home/avar/g/git/t/trash directory.t0005-signals/.git/
expecting success:
test-sigchain >actual
case "$?" in
143) true ;; # POSIX w/ SIGTERM=15
3) true ;; # Windows
*) false ;;
esac &&
test_cmp expect actual
Terminated
ok 1 - sigchain works
# passed all 1 test(s)
1..1
ok
All tests successful.
Files=1, Tests=1, 0 wallclock secs ( 0.02 usr 0.00 sys + 0.01 cusr 0.01 csys = 0.04 CPU)
Result: PASS
As a further example, consider this test script that uses a lot of
test-lib.sh features by Jakub Narebski:
#!/bin/sh
test_description='this is a sample test.
This test is here to see various test outputs.'
. ./test-lib.sh
say 'diagnostic message'
test_expect_success 'true test' 'true'
test_expect_success 'false test' 'false'
test_expect_failure 'true test (todo)' 'true'
test_expect_failure 'false test (todo)' 'false'
test_debug 'echo "debug message"'
test_done
The output of that was previously:
* diagnostic message # yellow
* ok 1: true test
* FAIL 2: false test # bold red
false
* FIXED 3: true test (todo)
* still broken 4: false test (todo) # bold green
* fixed 1 known breakage(s) # green
* still have 1 known breakage(s) # bold red
* failed 1 among remaining 3 test(s) # bold red
But is now:
diagnostic message # yellow
ok 1 - true test
not ok - 2 false test # bold red
# false
ok 3 - true test (todo) # TODO known breakage
not ok 4 - false test (todo) # TODO known breakage # bold green
# fixed 1 known breakage(s) # green
# still have 1 known breakage(s) # bold red
# failed 1 among remaining 3 test(s) # bold red
1..4
All the coloring is preserved when the test is run manually. Under
prove(1) the test performs as expected, even with --debug and
--verbose options:
$ prove ./example.sh :: --debug --verbose
./example.sh .. Dubious, test returned 1 (wstat 256, 0x100)
Failed 1/4 subtests
(1 TODO test unexpectedly succeeded)
Test Summary Report
-------------------
./example.sh (Wstat: 256 Tests: 4 Failed: 1)
Failed test: 2
TODO passed: 3
Non-zero exit status: 1
Files=1, Tests=4, 0 wallclock secs ( 0.02 usr 0.00 sys + 0.00 cusr 0.01 csys = 0.03 CPU)
Result: FAIL
The TAP harness itself doesn't get confused by the color output, they
aren't used by test-lib.sh stdout isn't open to a terminal (test -t 1).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* gv/portable:
test-lib: use DIFF definition from GIT-BUILD-OPTIONS
build: propagate $DIFF to scripts
Makefile: Tru64 portability fix
Makefile: HP-UX 10.20 portability fixes
Makefile: HPUX11 portability fixes
Makefile: SunOS 5.6 portability fix
inline declaration does not work on AIX
Allow disabling "inline"
Some platforms lack socklen_t type
Make NO_{INET_NTOP,INET_PTON} configured independently
Makefile: some platforms do not have hstrerror anywhere
git-compat-util.h: some platforms with mmap() lack MAP_FAILED definition
test_cmp: do not use "diff -u" on platforms that lack one
fixup: do not unconditionally disable "diff -u"
tests: use "test_cmp", not "diff", when verifying the result
Do not use "diff" found on PATH while building and installing
enums: omit trailing comma for portability
Makefile: -lpthread may still be necessary when libc has only pthread stubs
Rewrite dynamic structure initializations to runtime assignment
Makefile: pass CPPFLAGS through to fllow customization
Conflicts:
Makefile
wt-status.h
Otherwise running individual tests from t/ directory may lack the definition
of $DIFF, $GIT_TEST_CMP and friends.
Noticed and initial patch provided by Thomas Rast, alternative solution
suggested by Brandon Casey, which this patch implements.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Acked-by: Thomas Rast <trast@student.ethz.ch>
* jn/gitweb-caching-prep:
gitweb: Move generating page title to separate subroutine
gitweb: Add custom error handler using die_error
gitweb: Use nonlocal jump instead of 'exit' in die_error
gitweb: href(..., -path_info => 0|1)
Export more test-related variables when running external tests
In 3bf7886 (test-lib: Let tests specify commands to be run at end of
test, 2010-05-02), the git test harness learned to run cleanup
commands unconditionally at the end of a test. During each test,
the intended cleanup actions are collected in the test_cleanup variable
and evaluated. That variable looks something like this:
eval_ret=$?; clean_something && (exit "$eval_ret")
eval_ret=$?; clean_something_else && (exit "$eval_ret")
eval_ret=$?; final_cleanup && (exit "$eval_ret")
eval_ret=$?
All cleanup actions are run unconditionally but if one of them fails
it is properly reported through $eval_ret.
On FreeBSD, unfortunately, $? is set at the beginning of an ‘eval’
to 0 instead of the exit status of the previous command. This results
in tests using test_expect_code appearing to fail and all others
appearing to pass, unless their cleanup fails. Avoid the problem by
setting eval_ret before the ‘eval’ begins.
Thanks to Jeff King for the explanation.
Cc: Jeff King <peff@peff.net>
Cc: Johannes Sixt <j6t@kdbg.org>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Certain actions can imply that if the test fails early, recovery from
within other tests is too much to expect:
- creating unwritable directories, like the EACCESS test in t0001-init
- setting unusual configuration, like user.signingkey in t7004-tag
- crashing and leaving the index lock held, like t3600-rm once did
Some test scripts work around this by running cleanup actions outside
the supervision of the test harness, with the unfortunate consequence
that those commands are not appropriately echoed and their output not
suppressed. Others explicitly save exit status, clean up, and then
reset the exit status within the tests, which has excellent behavior
but makes the tests hard to read. Still others ignore the problem.
Allow tests a fourth option: by calling this function, tests can
stack up commands they would like to be run to clean up.
Commands passed to test_when_finished during a test are
unconditionally run in the test environment immediately before the
test is completed, in last-in-first-out order. If some cleanup
command fails, then the other cleanup commands are still run before
the failure is reported and the test script allowed to continue.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Dear Junio,
this is a resend of relicensing patch for test suite library, which
was initially sent by Carl Worth. Since the time you sent me acks for
this patch collected by you, I collected 8 additional acks as is
documented at
https://git.wiki.kernel.org/index.php/Test-lib_reclicensing. There are
still three contributors missing: Bert Wesarg, Stephan Beyer and Bryan
Donlan. The contributions of first two are clearly not copyrightable.
I'm not sure about the copyrightability of Bryan Donlan's
contributions (git log -p --author='Bryan Donlan' t/test-lib.sh).
Carl told me that in your ack collection process you missed only three
acks. So I wonder whether you already did some analysis of which
contributions are copyrightable. If so, are the missing acks in the
list bellow?
Thanks
Michal
8<--------8<--------8<--------
This file has had no explicit license information noted in it, but
has clearly been created and modified according to the terms of GPLv2
as with the rest of the git code base.
The purpose of relicensing is to allow other GPLv3+ projects (in
particular, the notmuch project: http://notmuchmail.org) to use this
same test-suite structure and to contribute changes back as well.
Signed-off-by: Carl Worth <cworth@cworth.org>
Signed-off-by: Michal Sojka <sojkam1@fel.cvut.cz>
Acked-by: Alex Riesen <raa.lkml@gmail.com>
Acked-by: Brandon Casey <drafnel@gmail.com>
Acked-by: Clemens Buchacher <drizzd@aon.at>
Acked-by: David Reiss <dreiss@facebook.com>
Acked-by: Emil Sit <sit@emilsit.net>
Acked-by: Eric Wong <normalperson@yhbt.net>
Acked-by: Fredrik Kuivinen <frekui@gmail.com>
Acked-by: Gerrit Pape <pape@smarden.org>
Acked-by: Christian Couder <chriscool@tuxfamily.org>
Acked-by: Jakub Narebski <jnareb@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Acked-by: Johan Herland <johan@herland.net>
Acked-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Acked-by: Johannes Sixt <j6t@kdbg.org>
Acked-by: Jonathan Nieder <jrnieder@gmail.com>
Acked-by: Josh Triplett <josh@joshtriplett.org>
Acked-by: Junio C Hamano <gitster@pobox.com>
Acked-by: Lea Wiemann <lewiemann@gmail.com>
Acked-by: Markus Heidelberg <markus.heidelberg@web.de>
Acked-by: Martin Waitz <tali@admingilde.org>
Acked-by: Matthew Ogilvie <mmogilvi_git@miniinfo.net>
Acked-by: Matthias Lederhofer <matled@gmx.net>
Acked-by: Michael J Gruber <git@drmicha.warpmail.net>
Acked-by: Michele Ballabio <barra_cuda@katamail.com>
Acked-by: Miklos Vajna <vmiklos@frugalware.org>
Acked-by: Nicolas Pitre <nico@fluxnic.net>
Acked-by: Pavel Roskin <proski@gnu.org>
Acked-by: Petr Baudis <pasky@ucw.cz>
Acked-by: Pierre Habouzit <madcoder@debian.org>
Acked-by: Robin Rosenberg <robin.rosenberg@dewire.com>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Acked-by: Stephen Boyd <bebarino@gmail.com>
Acked-by: Sverre Rabbelier <srabbelier@gmail.com>
Acked-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add exporting TEST_DIRECTORY and TRASH_DIRECTORY to test_external, for
external tests to be able to find test script (and git sources), and
to find trash directory (usually with test repository in it).
Add also exporting GIT_TEST_LONG, so that external test can skip
time-intensive tests unless test is invoked with `--long' option.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Acked-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Most of these tests are removing files, environment variables, and
configuration that might interfere outside the test. Putting these
clean-up commands in the test (in the same spirit as v1.7.1-rc0~59,
2010-03-20) means that errors during setup will be caught quickly and
non-error text will be suppressed without -v.
While at it, apply some other minor fixes:
- do not rely on the shell to export variables defined with the same
command as a function call
- avoid whitespace immediately after the > redirection operator, for
consistency with the style of other tests
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* tr/notes-display:
git-notes(1): add a section about the meaning of history
notes: track whether notes_trees were changed at all
notes: add shorthand --ref to override GIT_NOTES_REF
commit --amend: copy notes to the new commit
rebase: support automatic notes copying
notes: implement helpers needed for note copying during rewrite
notes: implement 'git notes copy --stdin'
rebase -i: invoke post-rewrite hook
rebase: invoke post-rewrite hook
commit --amend: invoke post-rewrite hook
Documentation: document post-rewrite hook
Support showing notes from more than one notes tree
test-lib: unset GIT_NOTES_REF to stop it from influencing tests
Conflicts:
git-am.sh
refs.c
Implement helper functions to load the rewriting config, and to
actually copy the notes. Also document the config.
Secondly, also implement an undocumented --for-rewrite=<cmd> option to
'git notes copy' which is used like --stdin, but also puts the
configuration for <cmd> into effect. It will be needed to support the
copying in git-rebase.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Acked-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With this patch, you can set notes.displayRef to a glob that points at
your favourite notes refs, e.g.,
[notes]
displayRef = refs/notes/*
Then git-log and friends will show notes from all trees.
Thanks to Junio C Hamano for lots of feedback, which greatly
influenced the design of the entire series and this commit in
particular.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Acked-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
I used to set GREP_OPTIONS to exclude *.orig and *.rej files. But with this
the test t4252-am-options.sh fails because it calls grep with a .rej file:
grep "@@ -1,3 +1,3 @@" file-2.rej
Signed-off-by: Bert Wesarg <bert.wesarg@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
append_cr(), remove_cr(), q_to_nul() and q_to_cr() are defined in multiple
tests. Consolidate them into test-lib.sh so we can stop redefining them.
The use of remove_cr() in t0020 to test for a CR is replaced with a new
function has_cr() to accurately reflect what is intended (the output of
remove_cr() was being thrown away).
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
