The compatibility implementation for unsetenv(3) were written to
mimic ancient, non-POSIX, variant seen in an old glibc; it has been
changed to return an integer to match the more modern era.
* jc/unsetenv-returns-an-int:
unsetenv(3) returns int, not void
Cygwin emulates Unix sockets by writing files with custom contents and
then marking them as system files.
The tricky problem is that while the file is written and its `system`
bit is set, it is still identified as a file. This caused test failures
when Git is too fast looking for the Unix sockets and then complains
that there is a plain file in the way.
Let's work around this by adding a delayed retry loop, specifically for
Cygwin.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Tested-by: Ramsay Jones <ramsay@ramsayjones.plus.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This compatilibity implementation has been returning a wrong type,
ever since 731043fd (Add compat/unsetenv.c ., 2006-01-25) added to
the system, yet nobody noticed it in the past 16 years, presumably
because no code checks failures in their unsetenv() calls. Sigh.
For now, make it always succeed.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
An editor session launched during a Git operation (e.g. during 'git
commit') can leave the terminal in a funny state. The code path
has updated to save the terminal state before, and restore it
after, it spawns an editor.
* cm/save-restore-terminal:
editor: save and reset terminal after calling EDITOR
terminal: teach git how to save/restore its terminal settings
Built-in fsmonitor (part 1).
* jh/builtin-fsmonitor-part1:
t/helper/simple-ipc: convert test-simple-ipc to use start_bg_command
run-command: create start_bg_command
simple-ipc/ipc-win32: add Windows ACL to named pipe
simple-ipc/ipc-win32: add trace2 debugging
simple-ipc: move definition of ipc_active_state outside of ifdef
simple-ipc: preparations for supporting binary messages.
trace2: add trace2_child_ready() to report on background children
Mostly preliminary clean-up in the hook API.
* ab/config-based-hooks-1:
hook-list.h: add a generated list of hooks, like config-list.h
hook.c users: use "hook_exists()" instead of "find_hook()"
hook.c: add a hook_exists() wrapper and use it in bugreport.c
hook.[ch]: move find_hook() from run-command.c to hook.c
Makefile: remove an out-of-date comment
Makefile: don't perform "mv $@+ $@" dance for $(GENERATED_H)
Makefile: stop hardcoding {command,config}-list.h
Makefile: mark "check" target as .PHONY
mmap() imitation used to call xmalloc() that dies upon malloc()
failure, which has been corrected to just return an error to the
caller to be handled.
* rs/git-mmap-uses-malloc:
compat: let git_mmap use malloc(3) directly
Currently, git will share its console with all its children (unless
they create their own), and is therefore possible that any of them
that might change the settings for it could affect its operations once
completed.
Refactor the platform specific functionality to save the terminal
settings and expand it to also do so for the output handler.
This will allow for the state of the terminal to be saved and
restored around a child that might misbehave (ex vi) which will
be implemented next.
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
gcc will helpfully raise a -Wcast-function-type warning when casting
between functions that might have incompatible return types
(ex: GetUserNameExW returns bool which is only half the size of the
return type from FARPROC which is long long), so create a new type that
could be used as a completely generic function pointer and cast through
it instead.
Additionaly remove the -Wno-incompatible-pointer-types temporary
flag added in 27e0c3c (win32: allow building with pedantic mode
enabled, 2021-09-03), as it will be no longer needed.
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Here, GCC warns about every use of the INIT_PROC_ADDR macro, for example:
In file included from compat/mingw.c:8:
compat/mingw.c: In function 'mingw_strftime':
compat/win32/lazyload.h:38:12: warning: assignment to
'size_t (*)(char *, size_t, const char *, const struct tm *)'
{aka 'long long unsigned int (*)(char *, long long unsigned int,
const char *, const struct tm *)'} from incompatible pointer type
'FARPROC' {aka 'long long int (*)()'} [-Wincompatible-pointer-types]
38 | (function = get_proc_addr(&proc_addr_##function))
| ^
compat/mingw.c:1014:6: note: in expansion of macro 'INIT_PROC_ADDR'
1014 | if (INIT_PROC_ADDR(strftime))
| ^~~~~~~~~~~~~~
(message wrapped for convenience). Insert a cast to keep the compiler
happy. A cast is fine in these cases because they are generic function
pointer values that have been looked up in a DLL.
Helped-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change various places that hardcode the names of these two files to
refer to either $(GENERATED_H), or to a new generated-hdrs
target. That target is consistent with the *-objs targets I recently
added in 029bac01a8 (Makefile: add {program,xdiff,test,git,fuzz}-objs
& objects targets, 2021-02-23).
A subsequent commit will add a new generated hook-list.h. By doing
this refactoring we'll only need to add the new file to the
GENERATED_H variable, not EXCEPT_HDRS, the vcbuild/README etc.
Hardcoding command-list.h there seems to have been a case of
copy/paste programming in 976aaedca0 (msvc: add a Makefile target to
pre-generate the Visual Studio solution, 2019-07-29). The
config-list.h was added later in 709df95b78 (help: move
list_config_help to builtin/help, 2020-04-16).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update the build procedure to use the "-pedantic" build when
DEVELOPER makefile macro is in effect.
* cb/pedantic-build-for-developers:
developer: enable pedantic by default
win32: allow building with pedantic mode enabled
gettext: remove optional non-standard parens in N_() definition
The tracing of process ancestry information has been enhanced.
* ab/tr2-leaks-and-fixes:
tr2: log N parent process names on Linux
tr2: do compiler enum check in trace2_collect_process_info()
tr2: leave the parent list empty upon failure & don't leak memory
tr2: stop leaking "thread_name" memory
tr2: clarify TRACE2_PROCESS_INFO_EXIT comment under Linux
tr2: remove NEEDSWORK comment for "non-procfs" implementations
Set an ACL on the named pipe to allow the well-known group EVERYONE
to read and write to the IPC server's named pipe. In the event that
the daemon was started with elevation, allow non-elevated clients
to communicate with the daemon.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Create "ipc-debug" category events to log unexpected errors
when creating Simple-IPC connections.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add `command_len` argument to the Simple IPC API.
In my original Simple IPC API, I assumed that the request would always
be a null-terminated string of text characters. The `command`
argument was just a `const char *`.
I found a caller that would like to pass a binary command to the
daemon, so I am amending the Simple IPC API to receive `const char
*command, size_t command_len` arguments.
I considered changing the `command` argument to be a `void *`, but the
IPC layer simply passes it to the pkt-line layer which takes a `const
char *`, so to avoid confusion I left it as is.
Note, the response side has always been a `struct strbuf` which
includes the buffer and length, so we already support returning a
binary answer. (Yes, it feels a little weird returning a binary
buffer in a `strbuf`, but it works.)
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
mmap() imitation used to call xmalloc() that dies upon malloc()
failure, which has been corrected to just return an error to the
caller to be handled.
* rs/git-mmap-uses-malloc:
compat: let git_mmap use malloc(3) directly
In 2f732bf15e (tr2: log parent process name, 2021-07-21) we started
logging parent process names, but only logged all parents on Windows.
on Linux only the name of the immediate parent process was logged.
Extend the functionality added there to also log full parent chain on
Linux.
This requires us to lookup "/proc/<getppid()>/stat" instead of
"/proc/<getppid()>/comm". The "comm" file just contains the name of the
process, but the "stat" file has both that information, and the parent
PID of that process, see procfs(5). We parse out the parent PID of our
own parent, and recursively walk the chain of "/proc/*/stat" files all
the way up the chain. A parent PID of 0 indicates the end of the
chain.
It's possible given the semantics of Linux's PID files that we end up
getting an entirely nonsensical chain of processes. It could happen if
e.g. we have a chain of processes like:
1 (init) => 321 (bash) => 123 (git)
Let's assume that "bash" was started a while ago, and that as shown
the OS has already cycled back to using a lower PID for us than our
parent process. In the time it takes us to start up and get to
trace2_collect_process_info(TRACE2_PROCESS_INFO_STARTUP) our parent
process might exit, and be replaced by an entirely different process!
We'd racily look up our own getppid(), but in the meantime our parent
would exit, and Linux would have cycled all the way back to starting
an entirely unrelated process as PID 321.
If that happens we'll just silently log incorrect data in our ancestry
chain. Luckily we don't need to worry about this except in this
specific cycling scenario, as Linux does not have PID
randomization. It appears it once did through a third-party feature,
but that it was removed around 2006[1]. For anyone worried about this
edge case raising PID_MAX via "/proc/sys/kernel/pid_max" will mitigate
it, but not eliminate it.
One thing we don't need to worry about is getting into an infinite
loop when walking "/proc/*/stat". See 353d3d77f4 (trace2: collect
Windows-specific process information, 2019-02-22) for the related
Windows code that needs to deal with that, and [2] for an explanation
of that edge case.
Aside from potential race conditions it's also a bit painful to
correctly parse the process name out of "/proc/*/stat". A simpler
approach is to use fscanf(), see [3] for an implementation of that,
but as noted in the comment being added here it would fail in the face
of some weird process names, so we need our own parse_proc_stat() to
parse it out.
With this patch the "ancestry" chain for a trace2 event might look
like this:
$ GIT_TRACE2_EVENT=/dev/stdout ~/g/git/git version | grep ancestry | jq -r .ancestry
[
"bash",
"screen",
"systemd"
]
And in the case of naughty process names like the following. This uses
perl's ability to use prctl(PR_SET_NAME, ...). See
Perl/perl5@7636ea95c5 (Set the legacy process name with prctl() on
assignment to $0 on Linux, 2010-04-15)[4]:
$ perl -e '$0 = "(naughty\nname)"; system "GIT_TRACE2_EVENT=/dev/stdout ~/g/git/git version"' | grep ancestry | jq -r .ancestry
[
"sh",
"(naughty\nname)",
"bash",
"screen",
"systemd"
]
1. https://grsecurity.net/news#grsec2110
2. https://lore.kernel.org/git/48a62d5e-28e2-7103-a5bb-5db7e197a4b9@jeffhostetler.com/
3. https://lore.kernel.org/git/87o8agp29o.fsf@evledraar.gmail.com/
4. 7636ea95c5
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change code added in 2f732bf15e (tr2: log parent process name,
2021-07-21) to use a switch statement without a "default" branch to
have the compiler error if this code ever drifts out of sync with the
members of the "enum trace2_process_info_reason".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a subsequent commit I'll be replacing most of this code to log N
parents, but let's first fix bugs introduced in the recent
2f732bf15e (tr2: log parent process name, 2021-07-21).
It was using the strbuf_read_file() in the wrong way, its return value
is either a length or a negative value on error. If we didn't have a
procfs, or otherwise couldn't access it we'd end up pushing an empty
string to the trace2 ancestry array.
It was also using the strvec_push() API the wrong way. That API always
does an xstrdup(), so by detaching the strbuf here we'd leak
memory. Let's instead pass in our pointer for strvec_push() to
xstrdup(), and then free our own strbuf. I do have some WIP changes to
make strvec_push_nodup() non-static, which makes this and some other
callsites nicer, but let's just follow the prevailing pattern of using
strvec_push() for now.
We'll also need to free that "procfs_path" strbuf whether or not
strbuf_read_file() succeeds, which was another source of memory leaks
in 2f732bf15e, i.e. we'd leak that memory as well if we weren't on a
system where we could read the file from procfs.
Let's move all the freeing of the memory to the end of the
function. If we're still at STRBUF_INIT with "name" due to not having
taken the branch where the strbuf_read_file() succeeds freeing it is
redundant. So we could move it into the body of the "if", but just
handling freeing the same way for all branches of the function makes
it more readable.
In combination with the preceding commit this makes all of
t[0-9]*trace2*.sh pass under SANITIZE=leak on Linux.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rewrite a comment added in 2f732bf15e (tr2: log parent process name,
2021-07-21) to describe what we might do under
TRACE2_PROCESS_INFO_EXIT in the future, instead of vaguely referring
to "something extra".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
I'm fairly sure that there is no way on Linux to inspect the process
tree without using procfs, any tool such as ps(1), top(1) etc. that
shows this sort of information ultimately looks the information up in
procfs.
So let's remove this comment added in 2f732bf15e (tr2: log parent
process name, 2021-07-21), it's setting us up for an impossible task.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In preparation to building with pedantic mode enabled, change a couple
of places where the current mingw gcc compiler provided with the SDK
reports issues.
A full fix for the incompatible use of (void *) to store function
pointers has been punted, with the minimal change to instead use a
generic function pointer (FARPROC), and therefore the (hopefully)
temporary need to disable incompatible pointer warnings.
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
trace2 logs learned to show parent process name to see in what
context Git was invoked.
* es/trace2-log-parent-process-name:
tr2: log parent process name
tr2: make process info collection platform-generic
xmalloc() dies on error, allows zero-sized allocations and enforces
GIT_ALLOC_LIMIT for testing. Our mmap replacement doesn't need any of
that. Let's cut out the wrapper, reject zero-sized requests as required
by POSIX and use malloc(3) directly. Allocation errors were needlessly
handled by git_mmap() before; this code becomes reachable now.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When performing a rebase, rmdir() is called on the folder .git/logs. On
Unix rmdir() exits without deleting anything in case .git/logs is a
symbolic link but the equivalent functions on Windows (_rmdir, _wrmdir
and RemoveDirectoryW) do not behave the same and remove the folder if it
is symlinked even if it is not empty.
This creates issues when folders in .git/ are symlinks which is
especially the case when git-repo[1] is used: It replaces `.git/logs/`
with a symlink.
One such issue is that the _target_ of that symlink is removed e.g.
during a `git rebase`, where `delete_reflog("REBASE_HEAD")` will not
only try to remove `.git/logs/REBASE_HEAD` but then recursively try to
remove the parent directories until an error occurs, a technique that
obviously relies on `rmdir()` refusing to remove a symlink.
This was reported in https://github.com/git-for-windows/git/issues/2967.
This commit updates mingw_rmdir() so that its behavior is the same as
Linux rmdir() in case of symbolic links.
To verify that Git does not regress on the reported issue, this patch
adds a regression test for the `git rebase` symptom, even if the same
`rmdir()` behavior is quite likely to cause potential problems in other
Git commands as well.
[1]: git-repo is a python tool built on top of Git which helps manage
many Git repositories. It stores all the .git/ folders in a central
place by taking advantage of symbolic links.
More information: https://gerrit.googlesource.com/git-repo/
Signed-off-by: Thomas Bétous <tomspycell@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It can be useful to tell who invoked Git - was it invoked manually by a
user via CLI or script? By an IDE? In some cases - like 'repo' tool -
we can influence the source code and set the GIT_TRACE2_PARENT_SID
environment variable from the caller process. In 'repo''s case, that
parent SID is manipulated to include the string "repo", which means we
can positively identify when Git was invoked by 'repo' tool. However,
identifying parents that way requires both that we know which tools
invoke Git and that we have the ability to modify the source code of
those tools. It cannot scale to keep up with the various IDEs and
wrappers which use Git, most of which we don't know about. Learning
which tools and wrappers invoke Git, and how, would give us insight to
decide where to improve Git's usability and performance.
Unfortunately, there's no cross-platform reliable way to gather the name
of the parent process. If procfs is present, we can use that; otherwise
we will need to discover the name another way. However, the process ID
should be sufficient to look up the process name on most platforms, so
that code may be shareable.
Git for Windows gathers similar information and logs it as a "data_json"
event. However, since "data_json" has a variable format, it is difficult
to parse effectively in some languages; instead, let's pursue a
dedicated "cmd_ancestry" event to record information about the ancestry
of the current process and a consistent, parseable way.
Git for Windows also gathers information about more than one generation
of parent. In Linux further ancestry info can be gathered with procfs,
but it's unwieldy to do so. In the interest of later moving Git for
Windows ancestry logging to the 'cmd_ancestry' event, and in the
interest of later adding more ancestry to the Linux implementation - or
of adding this functionality to other platforms which have an easier
time walking the process tree - let's make 'cmd_ancestry' accept an
array of parentage.
Signed-off-by: Emily Shaffer <emilyshaffer@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To pave the way for non-Windows platforms to define
trace2_collect_process_info(), reorganize the stub-or-definition schema
to something which doesn't directly reference Windows.
Platforms which want to collect parent process information in the
future should:
1. Add an implementation to compat/ (e.g. compat/somearch/procinfo.c)
2. Add that object to COMPAT_OBJS to config.mak.uname
(e.g. COMPAT_OBJS += compat/somearch/procinfo.o)
3. Define HAVE_PLATFORM_PROCINFO in config.mak.uname
In the Windows case, this definition lives in
compat/win32/trace2_win32_process_info.c, which is already conditionally
added to COMPAT_OBJS; so let's add HAVE_PLATFORM_PROCINFO to hint to the
build that compat/stub/procinfo.c should not be used.
Signed-off-by: Emily Shaffer <emilyshaffer@google.com>
Helped-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "simple-ipc" did not compile without pthreads support, but the
build procedure was not properly account for it.
* jh/simple-ipc-sans-pthread:
simple-ipc: correct ifdefs when NO_PTHREADS is defined
Simple IPC always requires threads (in addition to various
platform-specific IPC support). Fix the ifdefs in the Makefile
to define SUPPORTS_SIMPLE_IPC when appropriate.
Previously, the Unix version of the code would only verify that
Unix domain sockets were available.
This problem was reported here:
https://lore.kernel.org/git/YKN5lXs4AoK%2FJFTO@coredump.intra.peff.net/T/#m08be8f1942ea8a2c36cfee0e51cdf06489fdeafc
Reported-by: Randall S. Becker <rsbecker@nexbridge.com>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Apparently this is not supported with Microsoft's Universal C Runtime.
So let's not actually do that.
Instead, just return success because we _know_ that we expect the `NUL`
device to be present.
Side note: it is possible to turn off the "Null device driver" and
thereby disable `NUL`. Too many things are broken if this driver is
disabled, therefore it is not worth bothering to try to detect its
presence when `access()` is called.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Streamline the codepath to fix the UTF-8 encoding issues in the
argv[] and the prefix on macOS.
* tb/precompose-prefix-simplify:
macOS: precompose startup_info->prefix
precompose_utf8: make precompose_string_if_needed() public
commit 5c327502 (MacOS: precompose_argv_prefix(), 2021-02-03) uses
the function precompose_string_if_needed() internally. It is only
used from precompose_argv_prefix() and therefore static in
compat/precompose_utf8.c
Expose this function, it will be used in the next commit.
While there, allow passing a NULL pointer, which will return NULL.
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A simple IPC interface gets introduced to build services like
fsmonitor on top.
* jh/simple-ipc:
t0052: add simple-ipc tests and t/helper/test-simple-ipc tool
simple-ipc: add Unix domain socket implementation
unix-stream-server: create unix domain socket under lock
unix-socket: disallow chdir() when creating unix domain sockets
unix-socket: add backlog size option to unix_stream_listen()
unix-socket: eliminate static unix_stream_socket() helper function
simple-ipc: add win32 implementation
simple-ipc: design documentation for new IPC mechanism
pkt-line: add options argument to read_packetized_to_strbuf()
pkt-line: add PACKET_READ_GENTLE_ON_READ_ERROR option
pkt-line: do not issue flush packets in write_packetized_*()
pkt-line: eliminate the need for static buffer in packet_write_gently()
Create Unix domain socket based implementation of "simple-ipc".
A set of `ipc_client` routines implement a client library to connect
to an `ipc_server` over a Unix domain socket, send a simple request,
and receive a single response. Clients use blocking IO on the socket.
A set of `ipc_server` routines implement a thread pool to listen for
and concurrently service client connections.
The server creates a new Unix domain socket at a known location. If a
socket already exists with that name, the server tries to determine if
another server is already listening on the socket or if the socket is
dead. If socket is busy, the server exits with an error rather than
stealing the socket. If the socket is dead, the server creates a new
one and starts up.
If while running, the server detects that its socket has been stolen
by another server, it automatically exits.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Create Windows implementation of "simple-ipc" using named pipes.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Work around platforms whose open() is reported to return EINTR (it
shouldn't, as we do our signals with SA_RESTART).
* jk/open-returns-eintr:
config.mak.uname: enable OPEN_RETURNS_EINTR for macOS Big Sur
Makefile: add OPEN_RETURNS_EINTR knob
On some platforms, open() reportedly returns EINTR when opening regular
files and we receive a signal (usually SIGALRM from our progress meter).
This shouldn't happen, as open() should be a restartable syscall, and we
specify SA_RESTART when setting up the alarm handler. So it may actually
be a kernel or libc bug for this to happen. But it has been reported on
at least one version of Linux (on a network filesystem):
https://lore.kernel.org/git/c8061cce-71e4-17bd-a56a-a5fed93804da@neanderfunk.de/
as well as on macOS starting with Big Sur even on a regular filesystem.
We can work around it by retrying open() calls that get EINTR, just as
we do for read(), etc. Since we don't ever _want_ to interrupt an open()
call, we can get away with just redefining open, rather than insisting
all callsites use xopen().
We actually do have an xopen() wrapper already (and it even does this
retry, though there's no indication of it being an observed problem back
then; it seems simply to have been lifted from xread(), etc). But it is
used hardly anywhere, and isn't suitable for general use because it will
die() on error. In theory we could combine the two, but it's awkward to
do so because of the variable-args interface of open().
This patch adds a Makefile knob for enabling the workaround. It's not
enabled by default for any platforms in config.mak.uname yet, as we
don't have enough data to decide how common this is (I have not been
able to reproduce on either Linux or Big Sur myself). It may be worth
enabling preemptively anyway, since the cost is pretty low (if we don't
see an EINTR, it's just an extra conditional).
However, note that we must not enable this on Windows. It doesn't do
anything there, and the macro overrides the existing mingw_open()
redirection. I've added a preemptive #undef here in the mingw header
(which is processed first) to just quietly disable it (we could also
make it an #error, but there is little point in being so aggressive).
Reported-by: Aleksey Kliger <alklig@microsoft.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint-2.22:
Git 2.22.5
Git 2.21.4
Git 2.20.5
Git 2.19.6
Git 2.18.5
Git 2.17.6
unpack_trees(): start with a fresh lstat cache
run-command: invalidate lstat cache after a command finished
checkout: fix bug that makes checkout follow symlinks in leading path
* maint-2.21:
Git 2.21.4
Git 2.20.5
Git 2.19.6
Git 2.18.5
Git 2.17.6
unpack_trees(): start with a fresh lstat cache
run-command: invalidate lstat cache after a command finished
checkout: fix bug that makes checkout follow symlinks in leading path
* maint-2.20:
Git 2.20.5
Git 2.19.6
Git 2.18.5
Git 2.17.6
unpack_trees(): start with a fresh lstat cache
run-command: invalidate lstat cache after a command finished
checkout: fix bug that makes checkout follow symlinks in leading path
