* maint-2.35:
Git 2.35.7
Git 2.34.7
http: support CURLOPT_PROTOCOLS_STR
http: prefer CURLOPT_SEEKFUNCTION to CURLOPT_IOCTLFUNCTION
http-push: prefer CURLOPT_UPLOAD to CURLOPT_PUT
Git 2.33.7
Git 2.32.6
Git 2.31.7
Git 2.30.8
apply: fix writing behind newly created symbolic links
dir-iterator: prevent top-level symlinks without FOLLOW_SYMLINKS
clone: delay picking a transport until after get_repo_path()
t5619: demonstrate clone_local() with ambiguous transport
* maint-2.34:
Git 2.34.7
http: support CURLOPT_PROTOCOLS_STR
http: prefer CURLOPT_SEEKFUNCTION to CURLOPT_IOCTLFUNCTION
http-push: prefer CURLOPT_UPLOAD to CURLOPT_PUT
Git 2.33.7
Git 2.32.6
Git 2.31.7
Git 2.30.8
apply: fix writing behind newly created symbolic links
dir-iterator: prevent top-level symlinks without FOLLOW_SYMLINKS
clone: delay picking a transport until after get_repo_path()
t5619: demonstrate clone_local() with ambiguous transport
* maint-2.33:
Git 2.33.7
Git 2.32.6
Git 2.31.7
Git 2.30.8
apply: fix writing behind newly created symbolic links
dir-iterator: prevent top-level symlinks without FOLLOW_SYMLINKS
clone: delay picking a transport until after get_repo_path()
t5619: demonstrate clone_local() with ambiguous transport
* maint-2.32:
Git 2.32.6
Git 2.31.7
Git 2.30.8
apply: fix writing behind newly created symbolic links
dir-iterator: prevent top-level symlinks without FOLLOW_SYMLINKS
clone: delay picking a transport until after get_repo_path()
t5619: demonstrate clone_local() with ambiguous transport
* maint-2.31:
Git 2.31.7
Git 2.30.8
apply: fix writing behind newly created symbolic links
dir-iterator: prevent top-level symlinks without FOLLOW_SYMLINKS
clone: delay picking a transport until after get_repo_path()
t5619: demonstrate clone_local() with ambiguous transport
* maint-2.30:
Git 2.30.8
apply: fix writing behind newly created symbolic links
dir-iterator: prevent top-level symlinks without FOLLOW_SYMLINKS
clone: delay picking a transport until after get_repo_path()
t5619: demonstrate clone_local() with ambiguous transport
On my mirror of linux.git forkgroup with 780 islands, this saves
nearly 4G of heap memory in pack-objects. This savings only
benefits delta island users of pack bitmaps, as the process
would otherwise be exiting anyways.
However, there's probably not many delta island users, but the
majority of delta island users would also be pack bitmaps users.
Signed-off-by: Eric Wong <e@80x24.org>
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git rebase" often ignored incompatible options instead of
complaining, which has been corrected.
* en/rebase-incompatible-opts:
rebase: provide better error message for apply options vs. merge config
rebase: put rebase_options initialization in single place
rebase: fix formatting of rebase --reapply-cherry-picks option in docs
rebase: clarify the OPT_CMDMODE incompatibilities
rebase: add coverage of other incompatible options
rebase: fix incompatiblity checks for --[no-]reapply-cherry-picks
rebase: fix docs about incompatibilities with --root
rebase: remove --allow-empty-message from incompatible opts
rebase: flag --apply and --merge as incompatible
rebase: mark --update-refs as requiring the merge backend
When a user specifies a URI via 'git clone --bundle-uri', that URI may
be a bundle list that advertises a 'bundle.heuristic' value. In that
case, the Git client stores a 'fetch.bundleURI' config value storing
that URI.
Teach 'git fetch' to check for this config value and download bundles
from that URI before fetching from the Git remote(s). Likely, the bundle
provider has configured a heuristic (such as "creationToken") that will
allow the Git client to download only a portion of the bundles before
continuing the fetch.
Since this URI is completely independent of the remote server, we want
to be sure that we connect to the bundle URI before creating a
connection to the Git remote. We do not want to hold a stateful
connection for too long if we can avoid it.
To test that this works correctly, extend the previous tests that set
'fetch.bundleURI' to do follow-up fetches. The bundle list is updated
incrementally at each phase to demonstrate that the heuristic avoids
downloading older bundles. This includes the middle fetch downloading
the objects in bundle-3.bundle from the Git remote, and therefore not
needing that bundle in the third fetch.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Bundle providers may organize their bundle lists in a way that is
intended to improve incremental fetches, not just initial clones.
However, they do need to state that they have organized with that in
mind, or else the client will not expect to save time by downloading
bundles after the initial clone. This is done by specifying a
bundle.heuristic value.
There are two types of bundle lists: those at a static URI and those
that are advertised from a Git remote over protocol v2.
The new fetch.bundleURI config value applies for static bundle URIs that
are not advertised over protocol v2. If the user specifies a static URI
via 'git clone --bundle-uri', then Git can set this config as a reminder
for future 'git fetch' operations to check the bundle list before
connecting to the remote(s).
For lists provided over protocol v2, we will want to take a different
approach and create a property of the remote itself by creating a
remote.<id>.* type config key. That is not implemented in this change.
Later changes will update 'git fetch' to consume this option.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git fetch <group>", when "<group>" of remotes lists the same
remote twice, unnecessarily failed when parallel fetching was
enabled, which has been corrected.
* cw/fetch-remote-group-with-duplication:
fetch: fix duplicate remote parallel fetch bug
When config which selects the merge backend (currently,
rebase.autosquash=true or rebase.updateRefs=true) conflicts with other
options on the command line (such as --whitespace=fix), make the error
message specifically call out the config option and specify how to
override that config option on the command line.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The git-rebase manual noted several sets of incompatible options, but
we were missing tests for a few of these. Further, we were missing
code checks for one of these, which could result in command line
options being silently ignored.
Also, note that adding a check for autosquash means that using
--whitespace=fix together with the config setting rebase.autosquash=true
will trigger an error. A subsequent commit will improve the error
message.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
--[no-]reapply-cherry-picks was traditionally only supported by the
sequencer. Support was added for the apply backend, when --keep-base is
also specified, in commit ce5238a690 ("rebase --keep-base: imply
--reapply-cherry-picks", 2022-10-17). Make the code error out when
--[no-]reapply-cherry-picks is specified AND the apply backend is used
AND --keep-base is not specified. Also, clarify a number of comments
surrounding the interaction of these flags.
Helped-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, we flagged options which implied --apply as being
incompatible with options which implied --merge. But if both options
were given explicitly, then we didn't flag the incompatibility. The
same is true with --apply and --interactive. Add the check, and add
some testcases to verify these are also caught.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
--update-refs is built in terms of the sequencer, which requires the
merge backend. It was already marked as incompatible with the apply
backend in the git-rebase manual, but the code didn't check for this
incompatibility and warn the user. Check and error now.
While at it, fix a typo in t3422...and fix some misleading wording
(most options which used to be am-specific have since been implemented
in the merge backend as well).
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the previous commit, t5619 demonstrates an issue where two calls to
`get_repo_path()` could trick Git into using its local clone mechanism
in conjunction with a non-local transport.
That sequence is:
- the starting state is that the local path https:/example.com/foo is a
symlink that points to ../../../.git/modules/foo. So it's dangling.
- get_repo_path() sees that no such path exists (because it's
dangling), and thus we do not canonicalize it into an absolute path
- because we're using --separate-git-dir, we create .git/modules/foo.
Now our symlink is no longer dangling!
- we pass the url to transport_get(), which sees it as an https URL.
- we call get_repo_path() again, on the url. This second call was
introduced by f38aa83f9a (use local cloning if insteadOf makes a
local URL, 2014-07-17). The idea is that we want to pull the url
fresh from the remote.c API, because it will apply any aliases.
And of course now it sees that there is a local file, which is a
mismatch with the transport we already selected.
The issue in the above sequence is calling `transport_get()` before
deciding whether or not the repository is indeed local, and not passing
in an absolute path if it is local.
This is reminiscent of a similar bug report in [1], where it was
suggested to perform the `insteadOf` lookup earlier. Taking that
approach may not be as straightforward, since the intent is to store the
original URL in the config, but to actually fetch from the insteadOf
one, so conflating the two early on is a non-starter.
Note: we pass the path returned by `get_repo_path(remote->url[0])`,
which should be the same as `repo_name` (aside from any `insteadOf`
rewrites).
We *could* pass `absolute_pathdup()` of the same argument, which
86521acaca (Bring local clone's origin URL in line with that of a remote
clone, 2008-09-01) indicates may differ depending on the presence of
".git/" for a non-bare repo. That matters for forming relative submodule
paths, but doesn't matter for the second call, since we're just feeding
it to the transport code, which is fine either way.
[1]: https://lore.kernel.org/git/CAMoD=Bi41mB3QRn3JdZL-FGHs4w3C2jGpnJB-CqSndO7FMtfzA@mail.gmail.com/
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git check-attr" learned to take an optional tree-ish to read the
.gitattributes file from.
* kn/attr-from-tree:
attr: add flag `--source` to work with tree-ish
t0003: move setup for `--all` into new block
"git ls-tree --format='%(path) %(path)' $tree $path" showed the
path three times, which has been corrected.
* rs/ls-tree-path-expansion-fix:
ls-tree: remove dead store and strbuf for quote_c_style()
ls-tree: fix expansion of repeated %(path)
Code clean-up to tighten the use of in-core index in the API.
* ab/cache-api-cleanup:
cache API: add a "INDEX_STATE_INIT" macro/function, add release_index()
read-cache.c: refactor set_new_index_sparsity() for subsequent commit
sparse-index API: BUG() out on NULL ensure_full_index()
sparse-index.c: expand_to_path() can assume non-NULL "istate"
builtin/difftool.c: { 0 }-initialize rather than using memset()
Code clean-up.
* ab/bisect-cleanup:
bisect: no longer try to clean up left-over `.git/head-name` files
bisect: remove Cogito-related code
bisect run: fix the error message
bisect: verify that a bogus option won't try to start a bisection
bisect--helper: make the order consistently `argc, argv`
bisect--helper: simplify exit code computation
Code clean-up.
* tl/ls-tree-code-clean-up:
t3104: remove shift code in 'test_ls_tree_format'
ls-tree: cleanup the redundant SPACE
ls-tree: make "line_termination" less generic
ls-tree: fold "show_tree_data" into "cb" struct
ls-tree: use a "struct options"
ls-tree: don't use "show_tree_data" for "fast" callbacks
Code cleaning.
* rs/dup-array:
use DUP_ARRAY
add DUP_ARRAY
do full type check in BARF_UNLESS_COPYABLE
factor out BARF_UNLESS_COPYABLE
mingw: make argv2 in try_shell_exec() non-const
Fetching in parallel from a remote group with a duplicated remote results
in the following:
error: cannot lock ref '<ref>': is at <oid> but expected <oid>
This doesn't happen in serial since fetching from the same remote that
has already been fetched from is a noop. Therefore, remove any duplicated
remotes after remote groups are parsed.
Signed-off-by: Calvin Wan <calvinwan@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In hash_object(), we open a descriptor for each file to hash (whether we
got the filename from the command line or --stdin-paths), but never
close it. For the traditional code path, which feeds the result to
index_fd(), this is OK; it closes the descriptor for us.
But 5ba9a93b39 (hash-object: add --literally option, 2014-09-11) added a
second code path, which does not close the descriptor. There we need to
do so ourselves.
You can see the problem in a clone of git.git like this:
$ git ls-files -s | grep ^100644 | cut -f2 |
git hash-object --stdin-paths --literally >/dev/null
fatal: could not open 'builtin/var.c' for reading: Too many open files
After this patch, it completes successfully. I didn't bother with a
test, as it's a pain to deal with descriptor limits portably, and the
fix is so trivial.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the "repo" member was added to "the_index" in [1] the
repo_read_index() was made to populate it, but the unpopulated
"the_index" variable didn't get the same treatment.
Let's do that in initialize_the_repository() when we set it up, and
likewise for all of the current callers initialized an empty "struct
index_state".
This simplifies code that needs to deal with "the_index" or a custom
"struct index_state", we no longer need to second-guess this part of
the "index_state" deep in the stack. A recent example of such
second-guessing is the "istate->repo ? istate->repo : the_repository"
code in [2]. We can now simply use "istate->repo".
We're doing this by making use of the INDEX_STATE_INIT() macro (and
corresponding function) added in [3], which now have mandatory "repo"
arguments.
Because we now call index_state_init() in repository.c's
initialize_the_repository() we don't need to handle the case where we
have a "repo->index" whose "repo" member doesn't match the "repo"
we're setting up, i.e. the "Complete the double-reference" code in
repo_read_index() being altered here. That logic was originally added
in [1], and was working around the lack of what we now have in
initialize_the_repository().
For "fsmonitor-settings.c" we can remove the initialization of a NULL
"r" argument to "the_repository". This was added back in [4], and was
needed at the time for callers that would pass us the "r" from an
"istate->repo". Before this change such a change to
"fsmonitor-settings.c" would segfault all over the test suite (e.g. in
t0002-gitfile.sh).
This change has wider eventual implications for
"fsmonitor-settings.c". The reason the other lazy loading behavior in
it is required (starting with "if (!r->settings.fsmonitor) ..." is
because of the previously passed "r" being "NULL".
I have other local changes on top of this which move its configuration
reading to "prepare_repo_settings()" in "repo-settings.c", as we could
now start to rely on it being called for our "r". But let's leave all
of that for now, and narrowly remove this particular part of the
lazy-loading.
1. 1fd9ae517c (repository: add repo reference to index_state,
2021-01-23)
2. ee1f0c242e (read-cache: add index.skipHash config option,
2023-01-06)
3. 2f6b1eb794 (cache API: add a "INDEX_STATE_INIT" macro/function,
add release_index(), 2023-01-12)
4. 1e0ea5c431 (fsmonitor: config settings are repository-specific,
2022-03-25)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ab/cache-api-cleanup:
cache API: add a "INDEX_STATE_INIT" macro/function, add release_index()
read-cache.c: refactor set_new_index_sparsity() for subsequent commit
sparse-index API: BUG() out on NULL ensure_full_index()
sparse-index.c: expand_to_path() can assume non-NULL "istate"
builtin/difftool.c: { 0 }-initialize rather than using memset()
Conditionally skip the pre-applypatch and applypatch-msg hooks when
applying patches with 'git am'.
* tr/am--no-verify:
am: allow passing --no-verify flag
Hopefully in some not so distant future, we'll get advantages from always
initializing the "repo" member of the "struct index_state". To make
that easier let's introduce an initialization macro & function.
The various ad-hoc initialization of the structure can then be changed
over to it, and we can remove the various "0" assignments in
discard_index() in favor of calling index_state_init() at the end.
While not strictly necessary, let's also change the CALLOC_ARRAY() of
various "struct index_state *" to use an ALLOC_ARRAY() followed by
index_state_init() instead.
We're then adding the release_index() function and converting some
callers (including some of these allocations) over to it if they
either won't need to use their "struct index_state" again, or are just
about to call index_state_init().
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "subject_prefix" member of "struct revision" usually is set to a
borrowed string (either a string literal like "PATCH" that appear in
the program text as a hardcoded default, or the value of
"format.subjectprefix") and is never freed when the containing
revision structure is released. The "-v <num>" codepath however
violates this rule and stores a pointer to an allocated string to
this member, relinquishing the responsibility to free it when it is
done using the revision structure, leading to a small one-time leak.
Instead, keep track of the string it allocates to let the revision
structure borrow, and clean it up when it is done.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Stop initializing "name" because it is set again before use.
Let quote_c_style() write directly to "sb" instead of taking a detour
through "quoted". This avoids an allocation and a string copy. The
result is the same because the function only appends.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
expand_show_tree() borrows the base strbuf given to us by read_tree() to
build the full path of the current entry when handling %(path). Only
its indirect caller, show_tree_fmt(), removes the added entry name.
That works fine as long as %(path) is only included once in the format
string, but accumulates duplicates if it's repeated:
$ git ls-tree --format='%(path) %(path) %(path)' HEAD M*
Makefile MakefileMakefile MakefileMakefileMakefile
Reset the length after each use to get the same expansion every time;
here's the behavior with this patch:
$ ./git ls-tree --format='%(path) %(path) %(path)' HEAD M*
Makefile Makefile Makefile
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since [1] there has been no reason for keeping "git env--helper" a
built-in. The reason it was a built-in to begin with was to support
the GIT_TEST_GETTEXT_POISON mode removed in that commit. I.e. unlike
the rest of "test-tool" it would potentially be called by the
installed git via "git-sh-i18n.sh".
As none of that applies since [1] we should stop carrying this
technical debt, and move it to t/helper/*. As this mostly move-only
change shows this has the nice bonus that we'll stop wasting time
translating the internal-only strings it emits.
Even though this was a built-in, it was intentionally never
documented, see its introduction in [2]. It never saw use outside of
the test suite, except for the "GIT_TEST_GETTEXT_POISON" use-case
noted above.
1. d162b25f95 (tests: remove support for GIT_TEST_GETTEXT_POISON,
2021-01-20)
2. b4f207f339 (env--helper: new undocumented builtin wrapping
git_env_*(), 2019-06-21)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The contents of the .gitattributes files may evolve over time, but "git
check-attr" always checks attributes against them in the working tree
and/or in the index. It may be beneficial to optionally allow the users
to check attributes taken from a commit other than HEAD against paths.
Add a new flag `--source` which will allow users to check the
attributes against a commit (actually any tree-ish would do). When the
user uses this flag, we go through the stack of .gitattributes files but
instead of checking the current working tree and/or in the index, we
check the blobs from the provided tree-ish object. This allows the
command to also be used in bare repositories.
Since we use a tree-ish object, the user can pass "--source
HEAD:subdirectory" and all the attributes will be looked up as if
subdirectory was the root directory of the repository.
We cannot simply use the `<rev>:<path>` syntax without the `--source`
flag, similar to how it is used in `git show` because any non-flag
parameter before `--` is treated as an attribute and any parameter after
`--` is treated as a pathname.
The change involves creating a new function `read_attr_from_blob`, which
given the path reads the blob for the path against the provided source and
parses the attributes line by line. This function is plugged into
`read_attr()` function wherein we go through the stack of attributes
files.
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Toon Claes <toon@iotcl.com>
Co-authored-by: toon@iotcl.com
Signed-off-by: Junio C Hamano <gitster@pobox.com>
An redundant space was found in ls-tree.c, which is no doubt
a small change, but it might be OK to make a commit on its own.
Signed-off-by: Teng Long <dyroneteng@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "ls-tree" command isn't capable of ending "lines" with anything
except '\n' or '\0', and in the latter case we can avoid calling
write_name_quoted_relative() entirely. Let's do that, less for
optimization and more for clarity, the write_name_quoted_relative()
API itself does much the same thing.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Teng Long <dyroneteng@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After the the preceding two commits the only user of the
"show_tree_data" struct needed it along with the "options" member,
let's instead fold all of that into a "show_tree_data" struct that
we'll use only for that callback.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Teng Long <dyroneteng@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As a first step towards being able to turn this code into an API some
day let's change the "static" options in builtin/ls-tree.c into a
"struct ls_tree_options" that can be constructed dynamically without
the help of parse_options().
Because we're now using non-static variables for this we'll need to
clear_pathspec() at the end of cmd_ls_tree(), least various tests
start failing under SANITIZE=leak. The memory leak was already there
before, now it's just being brought to the surface.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Teng Long <dyroneteng@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As noted in [1] the code that made it in as part of
9c4d58ff2c (ls-tree: split up "fast path" callbacks, 2022-03-23) was
a "maybe a good idea, maybe not" RFC-quality patch. I hadn't looked
very carefully at the resulting patterns.
The implementation shared the "struct show_tree_data data", which was
introduced in e81517155e (ls-tree: introduce struct "show_tree_data",
2022-03-23) both for use in 455923e0a1 (ls-tree: introduce "--format"
option, 2022-03-23), and because the "fat" callback hadn't been split
up as 9c4d58ff2c did.
Now that that's been done we can see that most of what
show_tree_common() was doing could be done lazily by the callbacks
themselves, who in the pre-image were often using an odd mis-match of
their own arguments and those same arguments stuck into the "data"
structure. Let's also have the callers initialize the "type", rather
than grabbing it from the "data" structure afterwards.
1. https://lore.kernel.org/git/cover-0.7-00000000000-20220310T134811Z-avarab@gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Teng Long <dyronteng@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Once upon a time, there was this idea that Git would not actually be a
single coherent program, but rather a set of low-level programs that
users cobble together via shell scripts, or develop high-level user
interfaces for Git, or both.
Cogito was such a high-level user interface, incidentally implemented
via shell scripts that cobble together Git calls.
It did turn out relatively quickly that Git would much rather provide a
useful high-level user interface itself.
As of April 19th, 2007, Cogito was therefore discontinued (see
https://lore.kernel.org/git/20070419124648.GL4489@pasky.or.cz/).
Nevertheless, for almost 15 years after that announcement, Git carried
special code in `git bisect` to accommodate Cogito.
Since it is beyond doubt that there are no more Cogito users, let's
remove the last remnant of Cogito-accommodating code.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In d1bbbe45df (bisect--helper: reimplement `bisect_run` shell function
in C, 2021-09-13), we ported the `bisect run` subcommand to C, including
the part that prints out an error message when the implicit `git bisect
bad` or `git bisect good` failed.
However, the error message was supposed to print out whether the state
was "good" or "bad", but used a bogus (because non-populated) `args`
variable for it. This was fixed in [1], but as of [2] (when
`bisect--helper` was changed to the present `bisect-state') the error
message still talks about implementation details that should not
concern end users.
Fix that, and add a regression test to ensure that the intended form of
the error message.
1. 80c2e9657f (bisect--helper: report actual bisect_state() argument
on error, 2022-01-18
2. f37d0bdd42 (bisect: fix output regressions in v2.30.0, 2022-11-10)
Helped-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In C, the natural order is for `argc` to come before `argv` by virtue of
the `main()` function declaring the parameters in precisely that order.
It is confusing & distracting, then, when readers familiar with the C
language read code where that order is switched around.
Let's just change the order and avoid that type of developer friction.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We _already_ have a function to determine whether a given `enum
bisect_error` value is non-zero but still _actually_ indicates success.
Let's use it instead of duplicating the logic.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When handling "--exec" rebase collects the commands into a struct
string_list, then prepends "exec " to each command creating a multi line
string and finally splits that string back into a list of commands. This
is an artifact of the scripted rebase and the need to support "rebase
--preserve-merges". Now that "--preserve-merges" no-longer exists we can
cleanup the way the argument is handled. There is no need to add the
"exec " prefix to the commands as that is added by todo_list_to_strbuf().
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Refactor an initialization of a variable added in
03831ef7b5 (difftool: implement the functionality in the builtin,
2017-01-19). This refactoring makes a subsequent change smaller.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Once we find a match, there is no point to try finding the second
match in the inner loop. Break out of the loop once we find the
first match.
Signed-off-by: Seija Kijin <doremylover123@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a semantic patch for replace ALLOC_ARRAY+COPY_ARRAY with DUP_ARRAY
to reduce code duplication and apply its results.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As with the previous patch, using skip_prefix() is more readable and
less error-prone than a raw strncmp(), because it avoids a
manually-computed length. These cases differ from the previous patch
that uses starts_with() because they care about the value after the
matched prefix.
We can convert these to use skip_prefix() by introducing an extra
variable to hold the out-pointer.
Note in the case in ws.c that to get rid of the magic number "9"
completely, we also switch out "len" for recomputing the pointer
difference. These are equivalent because "len" is always "ep - string".
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's more readable to use starts_with() instead of strncmp() to match a
prefix, as the latter requires a manually-computed length, and has the
funny "matching is zero" return value common to cmp functions. This
patch converts several cases which were found with:
git grep 'strncmp(.*, [0-9]*)'
But note that it doesn't convert all such cases. There are several where
the magic length number is repeated elsewhere in the code, like:
/* handle "buf" which isn't NUL-terminated and might be too small */
if (len >= 3 && !strncmp(buf, "foo", 3))
or:
/* exact match for "foo", but within a larger string */
if (end - buf == 3 && !strncmp(buf, "foo", 3))
While it would not produce the wrong outcome to use starts_with() in
these cases, we'd still be left with one instance of "3". We're better
to leave them for now, as the repeated "3" makes it clear that the two
are linked (there may be other refactorings that handle both, but
they're out of scope for this patch).
A few things to note while reading the patch:
- all cases but one are trying to match, and so lose the extra "!".
The case in the first hunk of urlmatch.c is not-matching, and hence
gains a "!".
- the case in remote-fd.c is matching the beginning of "connect foo",
but we never look at str+8 to parse the "foo" part (which would make
this a candidate for skip_prefix(), not starts_with()). This seems
at first glance like a bug, but is a limitation of how remote-fd
works.
- the second hunk in urlmatch.c shows some cases adjacent to other
strncmp() calls that are left. These are of the "exact match within
a larger string" type, as described above.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix typos in code comments which repeat various words. Most of the
cases are simple in that they repeat a word that usually cannot be
repeated in a grammatically correct sentence. Just remove the
incorrectly duplicated word in these cases and rewrap text, if needed.
A tricky case is usage of "that that", which is sometimes grammatically
correct. However, an instance of this in "t7527-builtin-fsmonitor.sh"
doesn't need two words "that", because there is only one daemon being
discussed, so replace the second "that" with "the".
Reword code comment "entries exist on on-disk index" in function
update_one in file cache-tree.c, by replacing incorrect preposition "on"
with "in".
Signed-off-by: Andrei Rybak <rybak.a.v@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Stop using "git --super-prefix" and narrow the scope of its use to
the submodule--helper.
* ab/no-more-git-global-super-prefix:
read-tree: add "--super-prefix" option, eliminate global
submodule--helper: convert "{update,clone}" to their own "--super-prefix"
submodule--helper: convert "status" to its own "--super-prefix"
submodule--helper: convert "sync" to its own "--super-prefix"
submodule--helper: convert "foreach" to its own "--super-prefix"
submodule--helper: don't use global --super-prefix in "absorbgitdirs"
submodule.c & submodule--helper: pass along "super_prefix" param
read-tree + fetch tests: test failing "--super-prefix" interaction
submodule absorbgitdirs tests: add missing "Migrating git..." tests
Fix to a small regression in 2.38 days.
* ab/bundle-wo-args:
bundle <cmd>: have usage_msg_opt() note the missing "<file>"
builtin/bundle.c: remove superfluous "newargc" variable
bundle: don't segfault on "git bundle <subcmd>"
'cat-file' gains mailmap support for its '--batch-check' and '-s'
options.
* sa/cat-file-mailmap--batch-check:
cat-file: add mailmap support to --batch-check option
cat-file: add mailmap support to -s option
The git-am --no-verify flag is analogous to the same flag passed to
git-commit. It bypasses the pre-applypatch and applypatch-msg hooks
if they are enabled.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git format-patch" learned to honor format.mboxrd even when sending
patches to the standard output stream,
* ew/format-patch-mboxrd:
format-patch: support format.mboxrd with --stdout
Bundle URIs part 4.
* ds/bundle-uri-4:
clone: unbundle the advertised bundles
bundle-uri: download bundles from an advertised list
bundle-uri: allow relative URLs in bundle lists
strbuf: introduce strbuf_strip_file_from_path()
bundle-uri: serve bundle.* keys from config
bundle-uri client: add helper for testing server
transport: rename got_remote_heads
bundle-uri client: add boolean transfer.bundleURI setting
clone: request the 'bundle-uri' command when available
t: create test harness for 'bundle-uri' command
protocol v2: add server-side "bundle-uri" skeleton
Just like "git var GIT_EDITOR" abstracts the complex logic to
choose which editor gets used behind it, "git var" now give support
to GIT_SEQUENCE_EDITOR.
* sa/git-var-sequence-editor:
var: add GIT_SEQUENCE_EDITOR variable
Improve the usage we emit on e.g. "git bundle create" to note why
we're showing the usage, it's because the "<file>" argument is
missing.
We know that'll be the case for all parse_options_cmd_bundle() users,
as they're passing the "char **bundle_file" parameter, which as the
context shows we're expected to populate.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As noted in 891cb09db6 (bundle: don't segfault on "git bundle
<subcmd>", 2022-12-20) the "newargc" in this function is redundant to
using our own "argc". Let's refactor the function to avoid needlessly
introducing another variable.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Code clean-up around unused function parameters.
* jk/unused-post-2.39:
userdiff: mark unused parameter in internal callback
list-objects-filter: mark unused parameters in virtual functions
diff: mark unused parameters in callbacks
xdiff: mark unused parameter in xdl_call_hunk_func()
xdiff: drop unused parameter in def_ff()
ws: drop unused parameter from ws_blank_line()
list-objects: drop process_gitlink() function
blob: drop unused parts of parse_blob_buffer()
ls-refs: use repository parameter to iterate refs
The "--super-prefix" option to "git" was initially added in [1] for
use with "ls-files"[2], and shortly thereafter "submodule--helper"[3]
and "grep"[4]. It wasn't until [5] that "read-tree" made use of it.
At the time [5] made sense, but since then we've made "ls-files"
recurse in-process in [6], "grep" in [7], and finally
"submodule--helper" in the preceding commits.
Let's also remove it from "read-tree", which allows us to remove the
option to "git" itself.
We can do this because the only remaining user of it is the submodule
API, which will now invoke "read-tree" with its new "--super-prefix"
option. It will only do so when the "submodule_move_head()" function
is called.
That "submodule_move_head()" function was then only invoked by
"read-tree" itself, but now rather than setting an environment
variable to pass "--super-prefix" between cmd_read_tree() we:
- Set a new "super_prefix" in "struct unpack_trees_options". The
"super_prefixed()" function in "unpack-trees.c" added in [5] will now
use this, rather than get_super_prefix() looking up the environment
variable we set earlier in the same process.
- Add the same field to the "struct checkout", which is only needed to
ferry the "super_prefix" in the "struct unpack_trees_options" all the
way down to the "entry.c" callers of "submodule_move_head()".
Those calls which used the super prefix all originated in
"cmd_read_tree()". The only other caller is the "unlink_entry()"
caller in "builtin/checkout.c", which now passes a "NULL".
1. 74866d7579 (git: make super-prefix option, 2016-10-07)
2. e77aa336f1 (ls-files: optionally recurse into submodules, 2016-10-07)
3. 89c8626557 (submodule helper: support super prefix, 2016-12-08)
4. 0281e487fd (grep: optionally recurse into submodules, 2016-12-16)
5. 3d415425c7 (unpack-trees: support super-prefix option, 2017-01-17)
6. 188dce131f (ls-files: use repository object, 2017-06-22)
7. f9ee2fcdfa (grep: recurse in-process using 'struct repository', 2017-08-02)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As with a preceding commit to convert "absorbgitdirs", we can convert
"submodule--helper status" to use its own "--super-prefix", instead of
relying on the global "--super-prefix" argument to "git".
We need to convert both of these away from the global "--super-prefix"
at the same time, because "update" will call "clone", but "clone"
itself didn't make use of the global "--super-prefix" for displaying
paths. It was only on the list of sub-commands that accepted it
because "update"'s use of it would set it in its environment.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As with a preceding commit to convert "absorbgitdirs", we can convert
"submodule--helper status" to use its own "--super-prefix", instead of
relying on the global "--super-prefix" argument to "git" itself. See
that earlier commit for the rationale and background.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As with a preceding commit to convert "absorbgitdirs", we can convert
"submodule--helper sync" to use its own "--super-prefix", instead of
relying on the global "--super-prefix" argument to "git" itself. See
that earlier commit for the rationale and background.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As with a preceding commit to convert "absorbgitdirs", we can convert
"submodule--helper foreach" to use its own "--super-prefix", instead
of relying on the global "--super-prefix" argument to "git"
itself. See that earlier commit for the rationale and background.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "--super-prefix" facility was introduced in [1] has always been a
transitory hack, which is why we've made it an error to supply it as
an option to "git" to commands that don't know about it.
That's been a good goal, as it has a global effect we haven't wanted
calls to get_super_prefix() from built-ins we didn't expect.
But it has meant that when we've had chains of different built-ins
using it all of the processes in that "chain" have needed to support
it, and worse processes that don't need it have needed to ask for
"SUPPORT_SUPER_PREFIX" because their parent process needs it.
That's how "fsmonitor--daemon" ended up with it, per [2] it's called
from (among other things) "submodule--helper absorbgitdirs", but as we
declared "submodule--helper" as "SUPPORT_SUPER_PREFIX" we needed to
declare "fsmonitor--daemon" as accepting it too, even though it
doesn't care about it.
But in the case of "absorbgitdirs" it only needed "--super-prefix" to
invoke itself recursively, and we'd never have another "in-between"
process in the chain. So we didn't need the bigger hammer of "git
--super-prefix", and the "setenv(GIT_SUPER_PREFIX_ENVIRONMENT, ...)"
that it entails.
Let's instead accept a hidden "--super-prefix" option to
"submodule--helper absorbgitdirs" itself.
Eventually (as with all other "--super-prefix" users) we'll want to
clean this code up so that this all happens in-process. I.e. needing
any variant of "--super-prefix" is itself a hack around our various
global state, and implicit reliance on "the_repository". This stepping
stone makes such an eventual change easier, as we'll need to deal with
less global state at that point.
The "fsmonitor--daemon" test adjusted here was added in [3]. To assert
that it didn't run into the "--super-prefix" message it was asserting
the output it didn't have. Let's instead assert the full output that
we *do* have, using the same pattern as a preceding change to
"t/t7412-submodule-absorbgitdirs.sh" used.
We could also remove the test entirely (as [4] did), but even though
the initial reason for having it is gone we're still getting some
marginal benefit from testing the "fsmonitor" and "submodule
absorbgitdirs" interaction, so let's keep it.
The change here to have either a NULL or non-"" string as a
"super_prefix" instead of the previous arrangement of "" or non-"" is
somewhat arbitrary. We could also decide to never have to check for
NULL.
As we'll be changing the rest of the "git --super-prefix" users to the
same pattern, leaving them all consistent makes sense. Why not pick ""
over NULL? Because that's how the "prefix" works[5], and having
"prefix" and "super_prefix" work the same way will be less
confusing. That "prefix" picked NULL instead of "" is itself
arbitrary, but as it's easy to make this small bit of our overall API
consistent, let's go with that.
1. 74866d7579 (git: make super-prefix option, 2016-10-07)
2. 53fcfbc84f (fsmonitor--daemon: allow --super-prefix argument,
2022-05-26)
3. 53fcfbc84f (fsmonitor--daemon: allow --super-prefix argument,
2022-05-26)
4. https://lore.kernel.org/git/20221109004708.97668-5-chooglen@google.com/
5. 9725c8dda2 (built-ins: trust the "prefix" from run_builtin(),
2022-02-16)
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Start passing the "super_prefix" along as a parameter to
get_submodule_displaypath() and absorb_git_dir_into_superproject(),
rather than get the value directly as a global.
This is in preparation for subsequent commits, where we'll gradually
phase out get_super_prefix() for an alternative way of getting the
"super_prefix".
Most of the users of this get a get_super_prefix() value, either
directly or by indirection. The exceptions are:
- builtin/rm.c: Doesn't declare SUPPORT_SUPER_PREFIX, so we'd have
died if this was provided, so it's safe to pass "NULL".
- deinit_submodule(): The "deinit_submodule()" function has never been
able to use the "git -super-prefix". It will call
"absorb_git_dir_into_superproject()", but it will only do so from the
top-level project.
If "absorbgitdirs" recurses will use the "path" passed to
"absorb_git_dir_into_superproject()" in "deinit_submodule()" as its
starting "--super-prefix". So we can safely remove the
get_super_prefix() call here, and pass NULL instead.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
mboxrd is a more robust output format when used with --stdout
and needs more exposure. Introducing this config knob lets
users choose the more robust format for all their --stdout
uses.
Relying on --pretty=mboxrd and including all of pretty-formats.txt
in the `git format-patch' documentation would likely be
confusing to users. Furthermore, this setting is useful across
multiple invocations. So introduce `format.mboxrd' as a boolean
configuration knob that changes the default --pretty=email format
to --pretty=mboxrd when (and only when) --stdout is in use.
Signed-off-by: Eric Wong <e@80x24.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A previous change introduced the transport methods to acquire a bundle
list from the 'bundle-uri' protocol v2 command, when advertised _and_
when the client has chosen to enable the feature.
Teach Git to download and unbundle the data advertised by those bundles
during 'git clone'. This takes place between the ref advertisement and
the object data download, and stateful connections will linger while
the client downloads bundles. In the future, we should consider closing
the remote connection during this process.
Also, since the --bundle-uri option exists, we do not want to mix the
advertised bundles with the user-specified bundles.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Set up all the needed client parts of the 'bundle-uri' protocol v2
command, without actually doing anything with the bundle URIs.
If the server says it supports 'bundle-uri' teach Git to issue the
'bundle-uri' command after the 'ls-refs' during 'git clone'. The
returned key=value pairs are passed to the bundle list code which is
tested using a different ingest mechanism in t5750-bundle-uri-parse.sh.
At this point, Git does nothing with that bundle list. It will not
download any of the bundles. That will come in a later change after
these protocol bits are finalized.
The no-op client is initially used only by 'git clone' to test the basic
functionality, and eventually will bootstrap the initial download of Git
objects during a fresh clone. The bundle URI client will not be
integrated into other fetches until a mechanism is created to select a
subset of bundles for download.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since aef7d75e58 (builtin/bundle.c: let parse-options parse
subcommands, 2022-08-19) we've been segfaulting if no argument was
provided.
The fix is easy, as all of the "git bundle" subcommands require a
non-option argument we can check that we have arguments left after
calling parse-options().
This makes use of code added in 73c3253d75 (bundle: framework for
options before bundle file, 2019-11-10), before this change that code
has always been unreachable. In 73c3253d75 we'd never reach it as we
already checked "argc < 2" in cmd_bundle() itself.
Then when aef7d75e58 (whose segfault we're fixing here) migrated this
code to the subcommand API it removed that "argc < 2" check, but we
were still checking the wrong "argc" in parse_options_cmd_bundle(), we
need to check the "newargc". The "argc" will always be >= 1, as it
will necessarily contain at least the subcommand name
itself (e.g. "create").
As an aside, this could be safely squashed into this, but let's not do
that for this minimal segfault fix, as it's an unrelated refactoring:
--- a/builtin/bundle.c
+++ b/builtin/bundle.c
@@ -55,13 +55,12 @@ static int parse_options_cmd_bundle(int argc,
const char * const usagestr[],
const struct option options[],
char **bundle_file) {
- int newargc;
- newargc = parse_options(argc, argv, NULL, options, usagestr,
+ argc = parse_options(argc, argv, NULL, options, usagestr,
PARSE_OPT_STOP_AT_NON_OPTION);
- if (!newargc)
+ if (!argc)
usage_with_options(usagestr, options);
*bundle_file = prefix_filename(prefix, argv[0]);
- return newargc;
+ return argc;
}
static int cmd_bundle_create(int argc, const char **argv, const char *prefix) {
Reported-by: Hubert Jasudowicz <hubertj@stmcyber.pl>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Tested-by: Hubert Jasudowicz <hubertj@stmcyber.pl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Even though the cat-file command with `--batch-check` option does not
complain when `--use-mailmap` option is given, the latter option is
ignored. Compute the size of the object after replacing the idents and
report it instead.
In order to make `--batch-check` option honour the mailmap mechanism we
have to read the contents of the commit/tag object.
There were two ways to do it:
1. Make two calls to `oid_object_info_extended()`. If `--use-mailmap`
option is given, the first call will get us the type of the object
and second call will only be made if the object type is either a
commit or tag to get the contents of the object.
2. Make one call to `oid_object_info_extended()` to get the type of the
object. Then, if the object type is either of commit or tag, make a
call to `repo_read_object_file()` to read the contents of the object.
I benchmarked the following command with both the above approaches and
compared against the current implementation where `--use-mailmap`
option is ignored:
`git cat-file --use-mailmap --batch-all-objects --batch-check --buffer
--unordered`
The results can be summarized as follows:
Time (mean ± σ)
default 827.7 ms ± 104.8 ms
first approach 6.197 s ± 0.093 s
second approach 1.975 s ± 0.217 s
Since, the second approach is faster than the first one, I implemented
it in this patch.
The command git cat-file can now use the mailmap mechanism to replace
idents with canonical versions for commit and tag objects. There are
several options like `--batch`, `--batch-check` and `--batch-command`
that can be combined with `--use-mailmap`. But the documentation for
`--batch`, `--batch-check` and `--batch-command` doesn't say so. This
patch fixes that documentation.
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: John Cai <johncai86@gmail.com>
Helped-by: Taylor Blau <me@ttaylorr.com>
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Siddharth Asthana <siddharthasthana31@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Even though the cat-file command with `-s` option does not complain when
`--use-mailmap` option is given, the latter option is ignored. Compute
the size of the object after replacing the idents and report it instead.
In order to make `-s` option honour the mailmap mechanism we have to
read the contents of the commit/tag object. Make use of the call to
`oid_object_info_extended()` to get the contents of the object and store
in `buf`. `buf` is later freed in the function.
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: John Cai <johncai86@gmail.com>
Helped-by: Taylor Blau <me@ttaylorr.com>
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Siddharth Asthana <siddharthasthana31@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The way the diff machinery prepares the options array for the
parse_options API has been refactored to avoid resource leaks.
* rs/diff-parseopts:
diff: remove parseopts member from struct diff_options
diff: use add_diff_options() in diff_opt_parse()
diff: factor out add_diff_options()
The editor program used by Git when editing the sequencer "todo" file
is determined by examining a few environment variables and also
affected by configuration variables. Introduce "git var
GIT_SEQUENCE_EDITOR" to give users access to the final result of the
logic without having to know the exact details.
This is very similar in spirit to 44fcb497 (Teach git var about
GIT_EDITOR, 2009-11-11) that introduced "git var GIT_EDITOR".
Signed-off-by: Sean Allred <allred.sean@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git var UNKNOWN_VARIABLE" and "git var VARIABLE" with the variable
given an empty value used to behave identically. Now the latter
just gives an empty output, while the former still gives an error
message.
* sa/git-var-empty:
var: allow GIT_EDITOR to return null
var: do not print usage() with a correct invocation
Various leak fixes.
* ab/various-leak-fixes:
built-ins: use free() not UNLEAK() if trivial, rm dead code
revert: fix parse_options_concat() leak
cherry-pick: free "struct replay_opts" members
rebase: don't leak on "--abort"
connected.c: free the "struct packed_git"
sequencer.c: fix "opts->strategy" leak in read_strategy_opts()
ls-files: fix a --with-tree memory leak
revision API: call graph_clear() in release_revisions()
unpack-file: fix ancient leak in create_temp_file()
built-ins & libs & helpers: add/move destructors, fix leaks
dir.c: free "ident" and "exclude_per_dir" in "struct untracked_cache"
read-cache.c: clear and free "sparse_checkout_patterns"
commit: discard partial cache before (re-)reading it
{reset,merge}: call discard_index() before returning
tests: mark tests as passing with SANITIZE=leak
"merge-tree" learns a new `--merge-base` option.
* kz/merge-tree-merge-base:
docs: fix description of the `--merge-base` option
merge-tree.c: allow specifying the merge-base when --stdin is passed
merge-tree.c: add --merge-base=<commit> option
`git bisect` becomes a builtin.
* dd/git-bisect-builtin:
bisect; remove unused "git-bisect.sh" and ".gitignore" entry
Turn `git bisect` into a full built-in
bisect--helper: log: allow arbitrary number of arguments
bisect--helper: handle states directly
bisect--helper: emit usage for "git bisect"
bisect test: test exit codes on bad usage
bisect--helper: identify as bisect when report error
bisect-run: verify_good: account for non-negative exit status
bisect run: keep some of the post-v2.30.0 output
bisect: fix output regressions in v2.30.0
bisect: refactor bisect_run() to match CodingGuidelines
bisect tests: test for v2.30.0 "bisect run" regressions
The diff code provides a format_callback interface, but not every
callback needs each parameter (e.g., the "opt" and "data" parameters are
frequently left unused). Likewise for the output_prefix callback, the
low-level change/add_remove interfaces, the callbacks used by
xdi_diff(), etc.
Mark unused arguments in the callback implementations to quiet
-Wunused-parameter.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
apply_parse_options() passes the array of argument strings to
parse_options(), which removes recognized options. The removed strings
are not freed, though.
Make a copy of the strvec to pass to the function to retain the pointers
of its strings, so we release them all at the end.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation for pthread_create and pthread_sigmask state that:
"On success, pthread_create() returns 0;
on error, it returns an error number"
As such, we ought to check for an error
by seeing if the output is not 0.
Checking for "less than" is a mistake
as the error code numbers can be greater than 0.
Signed-off-by: Seija <doremylover123@gmail.com>
Acked-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix racy tests in t7527 by forcing the use of cookie files during all
types of queries. There were originaly observed on M1 macs with file
system encryption enabled.
There were a series of simple tests, such as "edit some files" and
"create some files", that started the daemon with GIT_TRACE_FSMONITOR
enabled so that the daemon would emit "event: <path>" messages to the
trace log. The test would make worktree modifications and then grep
the log file to confirm it contained the expected trace messages.
The greps would occasionally racily-fail. The expected messages
were always present in the log file, just not yet always present
when the greps ran.
NEEDSWORK: One could argue that the tests should use the `test-tool
fsmonitor-client query` and search for the expected pathnames in the
output rather than grepping the trace log, but I'll leave that for a
later exercise.
The racy tests called `test-tool fsmonitor-client query --token 0`
before grepping the log file. (Presumably to introduce a small delay
and/or to let the daemon sync with the file system following the last
modification, but that was not always sufficient and hence the race.)
When the query arg is just "0", the daemon treated it as a V1
(aka timestamp-relative request) and responded with a "trivial
response" and a new token, but without trying to catch up to the
the file system event stream. So the "event: <path>" messages
may or may not yet be in the log file when the grep commands
started.
FWIW, if the tests had sent `--token builtin:0:0` instead, it would
have forced a slightly different code path in the daemon that would
cause the daemon to use a cookie file and let it catch up with the
file system event stream. I did not see any test failures with this
change.
Instead of modifying the test, I updated the fsmonitor--daemon to
always use a cookie file and catch up to the file system on any
query operation, regardless of the format of the request token.
This is safer.
FWIW, I think the effect of the race was limited to the test.
Commands like `git status` would always do a full scan when getting a
trivial response. The fact that the daemon was slighly behind the
file system when it generated the response token would cause a second
`git status` to get a few extra paths that the client would have to
examine, but it would not be missing paths.
FWIW, I also think that an earlier version of the code always did
the cookie file for all types of queries, but it was optimized out
during a round of reviews or rework and we didn't notice the race.
Signed-off-by: Jeff Hostetler <jeffhostetler@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a function for appending the parseopts member of struct diff_options
to a struct option array. Use it in two sites instead of accessing the
parseopts member directly. Decoupling callers from diff internals like
that allows us to change the latter.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
