Once upon a time, there was this idea that Git would not actually be a
single coherent program, but rather a set of low-level programs that
users cobble together via shell scripts, or develop high-level user
interfaces for Git, or both.
Cogito was such a high-level user interface, incidentally implemented
via shell scripts that cobble together Git calls.
It did turn out relatively quickly that Git would much rather provide a
useful high-level user interface itself.
As of April 19th, 2007, Cogito was therefore discontinued (see
https://lore.kernel.org/git/20070419124648.GL4489@pasky.or.cz/).
Nevertheless, for almost 15 years after that announcement, Git carried
special code in `git bisect` to accommodate Cogito.
Since it is beyond doubt that there are no more Cogito users, let's
remove the last remnant of Cogito-accommodating code.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In d1bbbe45df (bisect--helper: reimplement `bisect_run` shell function
in C, 2021-09-13), we ported the `bisect run` subcommand to C, including
the part that prints out an error message when the implicit `git bisect
bad` or `git bisect good` failed.
However, the error message was supposed to print out whether the state
was "good" or "bad", but used a bogus (because non-populated) `args`
variable for it. This was fixed in [1], but as of [2] (when
`bisect--helper` was changed to the present `bisect-state') the error
message still talks about implementation details that should not
concern end users.
Fix that, and add a regression test to ensure that the intended form of
the error message.
1. 80c2e9657f (bisect--helper: report actual bisect_state() argument
on error, 2022-01-18
2. f37d0bdd42 (bisect: fix output regressions in v2.30.0, 2022-11-10)
Helped-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In C, the natural order is for `argc` to come before `argv` by virtue of
the `main()` function declaring the parameters in precisely that order.
It is confusing & distracting, then, when readers familiar with the C
language read code where that order is switched around.
Let's just change the order and avoid that type of developer friction.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We _already_ have a function to determine whether a given `enum
bisect_error` value is non-zero but still _actually_ indicates success.
Let's use it instead of duplicating the logic.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When handling "--exec" rebase collects the commands into a struct
string_list, then prepends "exec " to each command creating a multi line
string and finally splits that string back into a list of commands. This
is an artifact of the scripted rebase and the need to support "rebase
--preserve-merges". Now that "--preserve-merges" no-longer exists we can
cleanup the way the argument is handled. There is no need to add the
"exec " prefix to the commands as that is added by todo_list_to_strbuf().
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Refactor an initialization of a variable added in
03831ef7b5 (difftool: implement the functionality in the builtin,
2017-01-19). This refactoring makes a subsequent change smaller.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Once we find a match, there is no point to try finding the second
match in the inner loop. Break out of the loop once we find the
first match.
Signed-off-by: Seija Kijin <doremylover123@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a semantic patch for replace ALLOC_ARRAY+COPY_ARRAY with DUP_ARRAY
to reduce code duplication and apply its results.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As with the previous patch, using skip_prefix() is more readable and
less error-prone than a raw strncmp(), because it avoids a
manually-computed length. These cases differ from the previous patch
that uses starts_with() because they care about the value after the
matched prefix.
We can convert these to use skip_prefix() by introducing an extra
variable to hold the out-pointer.
Note in the case in ws.c that to get rid of the magic number "9"
completely, we also switch out "len" for recomputing the pointer
difference. These are equivalent because "len" is always "ep - string".
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's more readable to use starts_with() instead of strncmp() to match a
prefix, as the latter requires a manually-computed length, and has the
funny "matching is zero" return value common to cmp functions. This
patch converts several cases which were found with:
git grep 'strncmp(.*, [0-9]*)'
But note that it doesn't convert all such cases. There are several where
the magic length number is repeated elsewhere in the code, like:
/* handle "buf" which isn't NUL-terminated and might be too small */
if (len >= 3 && !strncmp(buf, "foo", 3))
or:
/* exact match for "foo", but within a larger string */
if (end - buf == 3 && !strncmp(buf, "foo", 3))
While it would not produce the wrong outcome to use starts_with() in
these cases, we'd still be left with one instance of "3". We're better
to leave them for now, as the repeated "3" makes it clear that the two
are linked (there may be other refactorings that handle both, but
they're out of scope for this patch).
A few things to note while reading the patch:
- all cases but one are trying to match, and so lose the extra "!".
The case in the first hunk of urlmatch.c is not-matching, and hence
gains a "!".
- the case in remote-fd.c is matching the beginning of "connect foo",
but we never look at str+8 to parse the "foo" part (which would make
this a candidate for skip_prefix(), not starts_with()). This seems
at first glance like a bug, but is a limitation of how remote-fd
works.
- the second hunk in urlmatch.c shows some cases adjacent to other
strncmp() calls that are left. These are of the "exact match within
a larger string" type, as described above.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix typos in code comments which repeat various words. Most of the
cases are simple in that they repeat a word that usually cannot be
repeated in a grammatically correct sentence. Just remove the
incorrectly duplicated word in these cases and rewrap text, if needed.
A tricky case is usage of "that that", which is sometimes grammatically
correct. However, an instance of this in "t7527-builtin-fsmonitor.sh"
doesn't need two words "that", because there is only one daemon being
discussed, so replace the second "that" with "the".
Reword code comment "entries exist on on-disk index" in function
update_one in file cache-tree.c, by replacing incorrect preposition "on"
with "in".
Signed-off-by: Andrei Rybak <rybak.a.v@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Stop using "git --super-prefix" and narrow the scope of its use to
the submodule--helper.
* ab/no-more-git-global-super-prefix:
read-tree: add "--super-prefix" option, eliminate global
submodule--helper: convert "{update,clone}" to their own "--super-prefix"
submodule--helper: convert "status" to its own "--super-prefix"
submodule--helper: convert "sync" to its own "--super-prefix"
submodule--helper: convert "foreach" to its own "--super-prefix"
submodule--helper: don't use global --super-prefix in "absorbgitdirs"
submodule.c & submodule--helper: pass along "super_prefix" param
read-tree + fetch tests: test failing "--super-prefix" interaction
submodule absorbgitdirs tests: add missing "Migrating git..." tests
Fix to a small regression in 2.38 days.
* ab/bundle-wo-args:
bundle <cmd>: have usage_msg_opt() note the missing "<file>"
builtin/bundle.c: remove superfluous "newargc" variable
bundle: don't segfault on "git bundle <subcmd>"
'cat-file' gains mailmap support for its '--batch-check' and '-s'
options.
* sa/cat-file-mailmap--batch-check:
cat-file: add mailmap support to --batch-check option
cat-file: add mailmap support to -s option
The git-am --no-verify flag is analogous to the same flag passed to
git-commit. It bypasses the pre-applypatch and applypatch-msg hooks
if they are enabled.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git format-patch" learned to honor format.mboxrd even when sending
patches to the standard output stream,
* ew/format-patch-mboxrd:
format-patch: support format.mboxrd with --stdout
Bundle URIs part 4.
* ds/bundle-uri-4:
clone: unbundle the advertised bundles
bundle-uri: download bundles from an advertised list
bundle-uri: allow relative URLs in bundle lists
strbuf: introduce strbuf_strip_file_from_path()
bundle-uri: serve bundle.* keys from config
bundle-uri client: add helper for testing server
transport: rename got_remote_heads
bundle-uri client: add boolean transfer.bundleURI setting
clone: request the 'bundle-uri' command when available
t: create test harness for 'bundle-uri' command
protocol v2: add server-side "bundle-uri" skeleton
Just like "git var GIT_EDITOR" abstracts the complex logic to
choose which editor gets used behind it, "git var" now give support
to GIT_SEQUENCE_EDITOR.
* sa/git-var-sequence-editor:
var: add GIT_SEQUENCE_EDITOR variable
Improve the usage we emit on e.g. "git bundle create" to note why
we're showing the usage, it's because the "<file>" argument is
missing.
We know that'll be the case for all parse_options_cmd_bundle() users,
as they're passing the "char **bundle_file" parameter, which as the
context shows we're expected to populate.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As noted in 891cb09db6 (bundle: don't segfault on "git bundle
<subcmd>", 2022-12-20) the "newargc" in this function is redundant to
using our own "argc". Let's refactor the function to avoid needlessly
introducing another variable.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Code clean-up around unused function parameters.
* jk/unused-post-2.39:
userdiff: mark unused parameter in internal callback
list-objects-filter: mark unused parameters in virtual functions
diff: mark unused parameters in callbacks
xdiff: mark unused parameter in xdl_call_hunk_func()
xdiff: drop unused parameter in def_ff()
ws: drop unused parameter from ws_blank_line()
list-objects: drop process_gitlink() function
blob: drop unused parts of parse_blob_buffer()
ls-refs: use repository parameter to iterate refs
The "--super-prefix" option to "git" was initially added in [1] for
use with "ls-files"[2], and shortly thereafter "submodule--helper"[3]
and "grep"[4]. It wasn't until [5] that "read-tree" made use of it.
At the time [5] made sense, but since then we've made "ls-files"
recurse in-process in [6], "grep" in [7], and finally
"submodule--helper" in the preceding commits.
Let's also remove it from "read-tree", which allows us to remove the
option to "git" itself.
We can do this because the only remaining user of it is the submodule
API, which will now invoke "read-tree" with its new "--super-prefix"
option. It will only do so when the "submodule_move_head()" function
is called.
That "submodule_move_head()" function was then only invoked by
"read-tree" itself, but now rather than setting an environment
variable to pass "--super-prefix" between cmd_read_tree() we:
- Set a new "super_prefix" in "struct unpack_trees_options". The
"super_prefixed()" function in "unpack-trees.c" added in [5] will now
use this, rather than get_super_prefix() looking up the environment
variable we set earlier in the same process.
- Add the same field to the "struct checkout", which is only needed to
ferry the "super_prefix" in the "struct unpack_trees_options" all the
way down to the "entry.c" callers of "submodule_move_head()".
Those calls which used the super prefix all originated in
"cmd_read_tree()". The only other caller is the "unlink_entry()"
caller in "builtin/checkout.c", which now passes a "NULL".
1. 74866d7579 (git: make super-prefix option, 2016-10-07)
2. e77aa336f1 (ls-files: optionally recurse into submodules, 2016-10-07)
3. 89c8626557 (submodule helper: support super prefix, 2016-12-08)
4. 0281e487fd (grep: optionally recurse into submodules, 2016-12-16)
5. 3d415425c7 (unpack-trees: support super-prefix option, 2017-01-17)
6. 188dce131f (ls-files: use repository object, 2017-06-22)
7. f9ee2fcdfa (grep: recurse in-process using 'struct repository', 2017-08-02)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As with a preceding commit to convert "absorbgitdirs", we can convert
"submodule--helper status" to use its own "--super-prefix", instead of
relying on the global "--super-prefix" argument to "git".
We need to convert both of these away from the global "--super-prefix"
at the same time, because "update" will call "clone", but "clone"
itself didn't make use of the global "--super-prefix" for displaying
paths. It was only on the list of sub-commands that accepted it
because "update"'s use of it would set it in its environment.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As with a preceding commit to convert "absorbgitdirs", we can convert
"submodule--helper status" to use its own "--super-prefix", instead of
relying on the global "--super-prefix" argument to "git" itself. See
that earlier commit for the rationale and background.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As with a preceding commit to convert "absorbgitdirs", we can convert
"submodule--helper sync" to use its own "--super-prefix", instead of
relying on the global "--super-prefix" argument to "git" itself. See
that earlier commit for the rationale and background.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As with a preceding commit to convert "absorbgitdirs", we can convert
"submodule--helper foreach" to use its own "--super-prefix", instead
of relying on the global "--super-prefix" argument to "git"
itself. See that earlier commit for the rationale and background.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "--super-prefix" facility was introduced in [1] has always been a
transitory hack, which is why we've made it an error to supply it as
an option to "git" to commands that don't know about it.
That's been a good goal, as it has a global effect we haven't wanted
calls to get_super_prefix() from built-ins we didn't expect.
But it has meant that when we've had chains of different built-ins
using it all of the processes in that "chain" have needed to support
it, and worse processes that don't need it have needed to ask for
"SUPPORT_SUPER_PREFIX" because their parent process needs it.
That's how "fsmonitor--daemon" ended up with it, per [2] it's called
from (among other things) "submodule--helper absorbgitdirs", but as we
declared "submodule--helper" as "SUPPORT_SUPER_PREFIX" we needed to
declare "fsmonitor--daemon" as accepting it too, even though it
doesn't care about it.
But in the case of "absorbgitdirs" it only needed "--super-prefix" to
invoke itself recursively, and we'd never have another "in-between"
process in the chain. So we didn't need the bigger hammer of "git
--super-prefix", and the "setenv(GIT_SUPER_PREFIX_ENVIRONMENT, ...)"
that it entails.
Let's instead accept a hidden "--super-prefix" option to
"submodule--helper absorbgitdirs" itself.
Eventually (as with all other "--super-prefix" users) we'll want to
clean this code up so that this all happens in-process. I.e. needing
any variant of "--super-prefix" is itself a hack around our various
global state, and implicit reliance on "the_repository". This stepping
stone makes such an eventual change easier, as we'll need to deal with
less global state at that point.
The "fsmonitor--daemon" test adjusted here was added in [3]. To assert
that it didn't run into the "--super-prefix" message it was asserting
the output it didn't have. Let's instead assert the full output that
we *do* have, using the same pattern as a preceding change to
"t/t7412-submodule-absorbgitdirs.sh" used.
We could also remove the test entirely (as [4] did), but even though
the initial reason for having it is gone we're still getting some
marginal benefit from testing the "fsmonitor" and "submodule
absorbgitdirs" interaction, so let's keep it.
The change here to have either a NULL or non-"" string as a
"super_prefix" instead of the previous arrangement of "" or non-"" is
somewhat arbitrary. We could also decide to never have to check for
NULL.
As we'll be changing the rest of the "git --super-prefix" users to the
same pattern, leaving them all consistent makes sense. Why not pick ""
over NULL? Because that's how the "prefix" works[5], and having
"prefix" and "super_prefix" work the same way will be less
confusing. That "prefix" picked NULL instead of "" is itself
arbitrary, but as it's easy to make this small bit of our overall API
consistent, let's go with that.
1. 74866d7579 (git: make super-prefix option, 2016-10-07)
2. 53fcfbc84f (fsmonitor--daemon: allow --super-prefix argument,
2022-05-26)
3. 53fcfbc84f (fsmonitor--daemon: allow --super-prefix argument,
2022-05-26)
4. https://lore.kernel.org/git/20221109004708.97668-5-chooglen@google.com/
5. 9725c8dda2 (built-ins: trust the "prefix" from run_builtin(),
2022-02-16)
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Start passing the "super_prefix" along as a parameter to
get_submodule_displaypath() and absorb_git_dir_into_superproject(),
rather than get the value directly as a global.
This is in preparation for subsequent commits, where we'll gradually
phase out get_super_prefix() for an alternative way of getting the
"super_prefix".
Most of the users of this get a get_super_prefix() value, either
directly or by indirection. The exceptions are:
- builtin/rm.c: Doesn't declare SUPPORT_SUPER_PREFIX, so we'd have
died if this was provided, so it's safe to pass "NULL".
- deinit_submodule(): The "deinit_submodule()" function has never been
able to use the "git -super-prefix". It will call
"absorb_git_dir_into_superproject()", but it will only do so from the
top-level project.
If "absorbgitdirs" recurses will use the "path" passed to
"absorb_git_dir_into_superproject()" in "deinit_submodule()" as its
starting "--super-prefix". So we can safely remove the
get_super_prefix() call here, and pass NULL instead.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
mboxrd is a more robust output format when used with --stdout
and needs more exposure. Introducing this config knob lets
users choose the more robust format for all their --stdout
uses.
Relying on --pretty=mboxrd and including all of pretty-formats.txt
in the `git format-patch' documentation would likely be
confusing to users. Furthermore, this setting is useful across
multiple invocations. So introduce `format.mboxrd' as a boolean
configuration knob that changes the default --pretty=email format
to --pretty=mboxrd when (and only when) --stdout is in use.
Signed-off-by: Eric Wong <e@80x24.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A previous change introduced the transport methods to acquire a bundle
list from the 'bundle-uri' protocol v2 command, when advertised _and_
when the client has chosen to enable the feature.
Teach Git to download and unbundle the data advertised by those bundles
during 'git clone'. This takes place between the ref advertisement and
the object data download, and stateful connections will linger while
the client downloads bundles. In the future, we should consider closing
the remote connection during this process.
Also, since the --bundle-uri option exists, we do not want to mix the
advertised bundles with the user-specified bundles.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Set up all the needed client parts of the 'bundle-uri' protocol v2
command, without actually doing anything with the bundle URIs.
If the server says it supports 'bundle-uri' teach Git to issue the
'bundle-uri' command after the 'ls-refs' during 'git clone'. The
returned key=value pairs are passed to the bundle list code which is
tested using a different ingest mechanism in t5750-bundle-uri-parse.sh.
At this point, Git does nothing with that bundle list. It will not
download any of the bundles. That will come in a later change after
these protocol bits are finalized.
The no-op client is initially used only by 'git clone' to test the basic
functionality, and eventually will bootstrap the initial download of Git
objects during a fresh clone. The bundle URI client will not be
integrated into other fetches until a mechanism is created to select a
subset of bundles for download.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since aef7d75e58 (builtin/bundle.c: let parse-options parse
subcommands, 2022-08-19) we've been segfaulting if no argument was
provided.
The fix is easy, as all of the "git bundle" subcommands require a
non-option argument we can check that we have arguments left after
calling parse-options().
This makes use of code added in 73c3253d75 (bundle: framework for
options before bundle file, 2019-11-10), before this change that code
has always been unreachable. In 73c3253d75 we'd never reach it as we
already checked "argc < 2" in cmd_bundle() itself.
Then when aef7d75e58 (whose segfault we're fixing here) migrated this
code to the subcommand API it removed that "argc < 2" check, but we
were still checking the wrong "argc" in parse_options_cmd_bundle(), we
need to check the "newargc". The "argc" will always be >= 1, as it
will necessarily contain at least the subcommand name
itself (e.g. "create").
As an aside, this could be safely squashed into this, but let's not do
that for this minimal segfault fix, as it's an unrelated refactoring:
--- a/builtin/bundle.c
+++ b/builtin/bundle.c
@@ -55,13 +55,12 @@ static int parse_options_cmd_bundle(int argc,
const char * const usagestr[],
const struct option options[],
char **bundle_file) {
- int newargc;
- newargc = parse_options(argc, argv, NULL, options, usagestr,
+ argc = parse_options(argc, argv, NULL, options, usagestr,
PARSE_OPT_STOP_AT_NON_OPTION);
- if (!newargc)
+ if (!argc)
usage_with_options(usagestr, options);
*bundle_file = prefix_filename(prefix, argv[0]);
- return newargc;
+ return argc;
}
static int cmd_bundle_create(int argc, const char **argv, const char *prefix) {
Reported-by: Hubert Jasudowicz <hubertj@stmcyber.pl>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Tested-by: Hubert Jasudowicz <hubertj@stmcyber.pl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Even though the cat-file command with `--batch-check` option does not
complain when `--use-mailmap` option is given, the latter option is
ignored. Compute the size of the object after replacing the idents and
report it instead.
In order to make `--batch-check` option honour the mailmap mechanism we
have to read the contents of the commit/tag object.
There were two ways to do it:
1. Make two calls to `oid_object_info_extended()`. If `--use-mailmap`
option is given, the first call will get us the type of the object
and second call will only be made if the object type is either a
commit or tag to get the contents of the object.
2. Make one call to `oid_object_info_extended()` to get the type of the
object. Then, if the object type is either of commit or tag, make a
call to `repo_read_object_file()` to read the contents of the object.
I benchmarked the following command with both the above approaches and
compared against the current implementation where `--use-mailmap`
option is ignored:
`git cat-file --use-mailmap --batch-all-objects --batch-check --buffer
--unordered`
The results can be summarized as follows:
Time (mean ± σ)
default 827.7 ms ± 104.8 ms
first approach 6.197 s ± 0.093 s
second approach 1.975 s ± 0.217 s
Since, the second approach is faster than the first one, I implemented
it in this patch.
The command git cat-file can now use the mailmap mechanism to replace
idents with canonical versions for commit and tag objects. There are
several options like `--batch`, `--batch-check` and `--batch-command`
that can be combined with `--use-mailmap`. But the documentation for
`--batch`, `--batch-check` and `--batch-command` doesn't say so. This
patch fixes that documentation.
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: John Cai <johncai86@gmail.com>
Helped-by: Taylor Blau <me@ttaylorr.com>
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Siddharth Asthana <siddharthasthana31@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Even though the cat-file command with `-s` option does not complain when
`--use-mailmap` option is given, the latter option is ignored. Compute
the size of the object after replacing the idents and report it instead.
In order to make `-s` option honour the mailmap mechanism we have to
read the contents of the commit/tag object. Make use of the call to
`oid_object_info_extended()` to get the contents of the object and store
in `buf`. `buf` is later freed in the function.
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: John Cai <johncai86@gmail.com>
Helped-by: Taylor Blau <me@ttaylorr.com>
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Siddharth Asthana <siddharthasthana31@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The way the diff machinery prepares the options array for the
parse_options API has been refactored to avoid resource leaks.
* rs/diff-parseopts:
diff: remove parseopts member from struct diff_options
diff: use add_diff_options() in diff_opt_parse()
diff: factor out add_diff_options()
The editor program used by Git when editing the sequencer "todo" file
is determined by examining a few environment variables and also
affected by configuration variables. Introduce "git var
GIT_SEQUENCE_EDITOR" to give users access to the final result of the
logic without having to know the exact details.
This is very similar in spirit to 44fcb497 (Teach git var about
GIT_EDITOR, 2009-11-11) that introduced "git var GIT_EDITOR".
Signed-off-by: Sean Allred <allred.sean@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git var UNKNOWN_VARIABLE" and "git var VARIABLE" with the variable
given an empty value used to behave identically. Now the latter
just gives an empty output, while the former still gives an error
message.
* sa/git-var-empty:
var: allow GIT_EDITOR to return null
var: do not print usage() with a correct invocation
Various leak fixes.
* ab/various-leak-fixes:
built-ins: use free() not UNLEAK() if trivial, rm dead code
revert: fix parse_options_concat() leak
cherry-pick: free "struct replay_opts" members
rebase: don't leak on "--abort"
connected.c: free the "struct packed_git"
sequencer.c: fix "opts->strategy" leak in read_strategy_opts()
ls-files: fix a --with-tree memory leak
revision API: call graph_clear() in release_revisions()
unpack-file: fix ancient leak in create_temp_file()
built-ins & libs & helpers: add/move destructors, fix leaks
dir.c: free "ident" and "exclude_per_dir" in "struct untracked_cache"
read-cache.c: clear and free "sparse_checkout_patterns"
commit: discard partial cache before (re-)reading it
{reset,merge}: call discard_index() before returning
tests: mark tests as passing with SANITIZE=leak
"merge-tree" learns a new `--merge-base` option.
* kz/merge-tree-merge-base:
docs: fix description of the `--merge-base` option
merge-tree.c: allow specifying the merge-base when --stdin is passed
merge-tree.c: add --merge-base=<commit> option
`git bisect` becomes a builtin.
* dd/git-bisect-builtin:
bisect; remove unused "git-bisect.sh" and ".gitignore" entry
Turn `git bisect` into a full built-in
bisect--helper: log: allow arbitrary number of arguments
bisect--helper: handle states directly
bisect--helper: emit usage for "git bisect"
bisect test: test exit codes on bad usage
bisect--helper: identify as bisect when report error
bisect-run: verify_good: account for non-negative exit status
bisect run: keep some of the post-v2.30.0 output
bisect: fix output regressions in v2.30.0
bisect: refactor bisect_run() to match CodingGuidelines
bisect tests: test for v2.30.0 "bisect run" regressions
The diff code provides a format_callback interface, but not every
callback needs each parameter (e.g., the "opt" and "data" parameters are
frequently left unused). Likewise for the output_prefix callback, the
low-level change/add_remove interfaces, the callbacks used by
xdi_diff(), etc.
Mark unused arguments in the callback implementations to quiet
-Wunused-parameter.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
apply_parse_options() passes the array of argument strings to
parse_options(), which removes recognized options. The removed strings
are not freed, though.
Make a copy of the strvec to pass to the function to retain the pointers
of its strings, so we release them all at the end.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation for pthread_create and pthread_sigmask state that:
"On success, pthread_create() returns 0;
on error, it returns an error number"
As such, we ought to check for an error
by seeing if the output is not 0.
Checking for "less than" is a mistake
as the error code numbers can be greater than 0.
Signed-off-by: Seija <doremylover123@gmail.com>
Acked-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix racy tests in t7527 by forcing the use of cookie files during all
types of queries. There were originaly observed on M1 macs with file
system encryption enabled.
There were a series of simple tests, such as "edit some files" and
"create some files", that started the daemon with GIT_TRACE_FSMONITOR
enabled so that the daemon would emit "event: <path>" messages to the
trace log. The test would make worktree modifications and then grep
the log file to confirm it contained the expected trace messages.
The greps would occasionally racily-fail. The expected messages
were always present in the log file, just not yet always present
when the greps ran.
NEEDSWORK: One could argue that the tests should use the `test-tool
fsmonitor-client query` and search for the expected pathnames in the
output rather than grepping the trace log, but I'll leave that for a
later exercise.
The racy tests called `test-tool fsmonitor-client query --token 0`
before grepping the log file. (Presumably to introduce a small delay
and/or to let the daemon sync with the file system following the last
modification, but that was not always sufficient and hence the race.)
When the query arg is just "0", the daemon treated it as a V1
(aka timestamp-relative request) and responded with a "trivial
response" and a new token, but without trying to catch up to the
the file system event stream. So the "event: <path>" messages
may or may not yet be in the log file when the grep commands
started.
FWIW, if the tests had sent `--token builtin:0:0` instead, it would
have forced a slightly different code path in the daemon that would
cause the daemon to use a cookie file and let it catch up with the
file system event stream. I did not see any test failures with this
change.
Instead of modifying the test, I updated the fsmonitor--daemon to
always use a cookie file and catch up to the file system on any
query operation, regardless of the format of the request token.
This is safer.
FWIW, I think the effect of the race was limited to the test.
Commands like `git status` would always do a full scan when getting a
trivial response. The fact that the daemon was slighly behind the
file system when it generated the response token would cause a second
`git status` to get a few extra paths that the client would have to
examine, but it would not be missing paths.
FWIW, I also think that an earlier version of the code always did
the cookie file for all types of queries, but it was optimized out
during a round of reviews or rework and we didn't notice the race.
Signed-off-by: Jeff Hostetler <jeffhostetler@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a function for appending the parseopts member of struct diff_options
to a struct option array. Use it in two sites instead of accessing the
parseopts member directly. Decoupling callers from diff internals like
that allows us to change the latter.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
pack-objects uses OPT_PARSE_LIST_OBJECTS_FILTER_INIT() to initialize the
a rev_info struct lazily before populating its filter member using the
--filter option values. It tracks whether the initialization is needed
using the .have_revs member of the callback data.
There is a better way: Use a stand-alone list_objects_filter_options
struct and build a rev_info struct with its .filter member after option
parsing. This allows using the simpler OPT_PARSE_LIST_OBJECTS_FILTER()
and getting rid of the extra callback mechanism.
Even simpler would be using a struct rev_info as before 5cb28270a1
(pack-objects: lazily set up "struct rev_info", don't leak, 2022-03-28),
but that would expose a memory leak caused by repo_init_revisions()
followed by release_revisions() without a setup_revisions() call in
between.
Using list_objects_filter_options also allows pushing the rev_info
struct into get_object_list(), where it arguably belongs. Either way,
this is all left for later.
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 5cb28270a1 (pack-objects: lazily set up "struct rev_info", don't
leak, 2022-03-28) --filter options given to git pack-objects overrule
earlier ones, letting only the leftmost win and leaking the memory
allocated for earlier ones. Fix that by only initializing the rev_info
struct once.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git prune" may try to iterate over .git/objects/pack for trash
files to remove in it, and loudly fail when the directory is
missing, which is not necessary. The command has been taught to
ignore such a failure.
* ew/prune-with-missing-objects-pack:
prune: quiet ENOENT on missing directories
The handling to die early when there is no EDITOR is valuable when
used in normal code (i.e., editor.c). In git-var, where
null/empty-string is a perfectly valid value to return, it doesn't
make as much sense.
Remove this handling from `git var GIT_EDITOR` so that it does not
fail so noisily when there is no defined editor.
Signed-off-by: Sean Allred <allred.sean@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before, git-var could print usage() even if the command was invoked
correctly with a variable defined in git_vars -- provided that its
read() function returned NULL.
Now, we only print usage() only if it was called with a logical
variable that wasn't defined -- regardless of read().
Since we now know the variable is valid when we call read_var(), we
can avoid printing usage() here (and exiting with code 129) and
instead exit quietly with code 1. While exiting with a different code
can be a breaking change, it's far better than changing the exit
status more generally from 'failure' to 'success'.
Signed-off-by: Sean Allred <allred.sean@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git receive-pack" used to use all the local refs as the boundary for
checking connectivity of the data "git push" sent, but now it uses
only the refs that it advertised to the pusher. In a repository with
the .hideRefs configuration, this reduces the resources needed to
perform the check.
cf. <221028.86bkpw805n.gmgdl@evledraar.gmail.com>
cf. <xmqqr0yrizqm.fsf@gitster.g>
* ps/receive-use-only-advertised:
receive-pack: only use visible refs for connectivity check
rev-parse: add `--exclude-hidden=` option
revision: add new parameter to exclude hidden refs
revision: introduce struct to handle exclusions
revision: move together exclusion-related functions
refs: get rid of global list of hidden refs
refs: fix memory leak when parsing hideRefs config
'git maintenance register' is taught to write configuration to an
arbitrary path, and 'git for-each-repo' is taught to expand tilde
characters in paths.
* rp/maintenance-qol:
builtin/gc.c: fix use-after-free in maintenance_unregister()
maintenance --unregister: fix uninit'd data use & -Wdeclaration-after-statement
maintenance: add option to register in a specific config
for-each-repo: interpolate repo path arguments
Fix a regression in the bisect-helper which mistakenly treats
arguments to the command given to 'git bisect run' as arguments to
the helper.
* dd/bisect-helper-subcommand:
bisect--helper: parse subcommand with OPT_SUBCOMMAND
bisect--helper: move all subcommands into their own functions
bisect--helper: remove unused options
Preparation to remove git-submodule.sh and replace it with a builtin.
* ab/submodule-helper-prep-only:
submodule--helper: use OPT_SUBCOMMAND() API
submodule--helper: drop "update --prefix <pfx>" for "-C <pfx> update"
submodule--helper: remove --prefix from "absorbgitdirs"
submodule API & "absorbgitdirs": remove "----recursive" option
submodule.c: refactor recursive block out of absorb function
submodule tests: test for a "foreach" blind-spot
submodule--helper: fix a memory leak in "status"
submodule tests: add tests for top-level flag output
submodule--helper: move "config" to a test-tool
$GIT_DIR/objects/pack may be removed to save inodes in shared
repositories. Quiet down prune in cases where either
$GIT_DIR/objects or $GIT_DIR/objects/pack is non-existent,
but emit the system error in other cases to help users diagnose
permissions problems or resource constraints.
Signed-off-by: Eric Wong <e@80x24.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For a lot of uses of UNLEAK() it would be quite tricky to release the
memory involved, or we're missing the relevant *_(release|clear)()
functions. But in these cases we have them already, and can just
invoke them on the variable(s) involved, instead of UNLEAK().
For "builtin/worktree.c" the UNLEAK() was also added in [1], but the
struct member it's unleaking was removed in [2]. The only non-"int"
member of that structure is "const char *keep_locked", which comes to
us via "argv" or a string literal[3].
We have good visibility via the compiler and
tooling (e.g. SANITIZE=address) on bad free()-ing, but none on
UNLEAK() we don't need anymore. So let's prefer releasing the memory
when it's easy.
For "bugreport", "worktree" and "config" we need to start using a "ret
= ..." return pattern. For "builtin/bugreport.c" these UNLEAK() were
added in [4], and for "builtin/config.c" in [1].
For "config" the code seen here was the only user of the "value"
variable. For "ACTION_{RENAME,REMOVE}_SECTION" we need to be sure to
return the right exit code in the cases where we were relying on
falling through to the top-level.
I think there's still a use-case for UNLEAK(), but hat it's changed
since then. Using it so that "we can see the real leaks" is
counter-productive in these cases.
It's more useful to have UNLEAK() be a marker of the remaining odd
cases where it's hard to free() the memory for whatever reason. With
this change less than 20 of them remain in-tree.
1. 0e5bba53af (add UNLEAK annotation for reducing leak false
positives, 2017-09-08)
2. d861d34a6e (worktree: remove extra members from struct add_opts,
2018-04-24)
3. 0db4961c49 (worktree: teach `add` to accept --reason <string> with
--lock, 2021-07-15)
4. 0e5bba53af and 00d8c31105 (commit: fix "author_ident" leak,
2022-05-12).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Free memory from parse_options_concat(), which comes from code
originally added (then extended) in [1].
At this point we could get several more tests leak-free by free()-ing
the xstrdup() just above the line being changed, but that one's
trickier than it seems. The sequencer_remove_state() function
supposedly owns it, but sometimes we don't call it. I have a fix for
it, but it's non-trivial, so let's fix the easy one first.
1. c62f6ec341 (revert: add --ff option to allow fast forward when
cherry-picking, 2010-03-06)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Call the release_revisions() function added in
1878b5edc0 (revision.[ch]: provide and start using a
release_revisions(), 2022-04-13) in cmd_cherry_pick(), as well as
freeing the xmalloc()'d "revs" member itself.
This is the same change as the one made for cmd_revert() a few lines
above it in fd74ac95ac (revert: free "struct replay_opts" members,
2022-07-01).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Fix a leak in the recent 6159e7add4 (rebase --abort: improve reflog
message, 2022-10-12). Before that commit we'd strbuf_release() the
reflog message we were formatting, but when that code was refactored
to use "ropts.head_msg" the strbuf_release() was omitted.
Ideally the three users of "ropts" in cmd_rebase() should use
different "ropts" variables, in practice they're completely separate,
as this and the other user in the "switch" statement will "goto
cleanup", which won't touch "ropts".
The third caller after the "switch" is then unreachable if we take
these two branches, so all of them are getting a "{ 0 }" init'd
"ropts".
So it's OK that we're leaving a stale pointer in "ropts.head_msg",
cleaning it up was our responsibility, and it won't be used again.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Fix a memory leak in overlay_tree_on_index(), we need to
clear_pathspec() at some point, which might as well be after the last
time we use it in the function.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Fix a leak that's been with us since 3407bb4940 (Add "unpack-file"
helper that unpacks a sha1 blob into a tmpfile., 2005-04-18). See
00c8fd493a (cat-file: use streaming API to print blobs, 2012-03-07)
for prior art which shows the same API pattern, i.e. free()-ing the
result of read_object_file() after it's used.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Fix various leaks in built-ins, libraries and a test helper here we
were missing a call to strbuf_release(), string_list_clear() etc, or
were calling them after a potential "return".
Comments on individual changes:
- builtin/checkout.c: Fix a memory leak that was introduced in [1]. A
sibling leak introduced in [2] was recently fixed in [3]. As with [3]
we should be using the wt_status_state_free_buffers() API introduced
in [4].
- builtin/repack.c: Fix a leak that's been here since this use of
"strbuf_release()" was added in a1bbc6c017 (repack: rewrite the shell
script in C, 2013-09-15). We don't use the variable for anything
except this loop, so we can instead free it right afterwards.
- builtin/rev-parse: Fix a leak that's been here since this code was
added in 21d4783538 (Add a parseopt mode to git-rev-parse to bring
parse-options to shell scripts., 2007-11-04).
- builtin/stash.c: Fix a couple of leaks that have been here since
this code was added in d4788af875 (stash: convert create to builtin,
2019-02-25), we strbuf_release()'d only some of the "struct strbuf" we
allocated earlier in the function, let's release all of them.
- ref-filter.c: Fix a leak in 482c119186 (gpg-interface: improve
interface for parsing tags, 2021-02-11), we don't use the "payload"
variable that we ask parse_signature() to populate for us, so let's
free it.
- t/helper/test-fake-ssh.c: Fix a leak that's been here since this
code was added in 3064d5a38c (mingw: fix t5601-clone.sh,
2016-01-27). Let's free the "struct strbuf" as soon as we don't need
it anymore.
1. c45f0f525d (switch: reject if some operation is in progress,
2019-03-29)
2. 2708ce62d2 (branch: sort detached HEAD based on a flag,
2021-01-07)
3. abcac2e19f (ref-filter.c: fix a leak in get_head_description,
2022-09-25)
4. 962dd7ebc3 (wt-status: introduce wt_status_state_free_buffers(),
2020-09-27).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
The read_cache() in prepare_to_commit() would end up clobbering the
pointer we had for a previously populated "the_index.cache_tree" in
the very common case of "git commit" stressed by e.g. the tests being
changed here.
We'd populate "the_index.cache_tree" by calling
"update_main_cache_tree" in prepare_index(), but would not end up with
a "fully prepared" index. What constitutes an existing index is
clearly overly fuzzy, here we'll check "active_nr" (aka
"the_index.cache_nr"), but our "the_index.cache_tree" might have been
malloc()'d already.
Thus the code added in 11c8a74a64 (commit: write cache-tree data when
writing index anyway, 2011-12-06) would end up allocating the
"cache_tree", and would interact here with code added in
7168624c35 (Do not generate full commit log message if it is not
going to be used, 2007-11-28). The result was a very common memory
leak.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
These two built-ins both deal with the index, but weren't discarding
it. In subsequent commits we'll add more free()-ing to discard_index()
that we've missed, but let's first call the existing function.
We can doubtless add discard_index() (or its alias discard_cache()) to
a lot more places, but let's just add it here for now.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Apply "index-compatibility.pending.cocci" rule to "builtin/*", but
exclude those where we conflict with in-flight changes.
As a result some of them end up using only "the_index", so let's have
them use the more narrow "USE_THE_INDEX_VARIABLE" rather than
"USE_THE_INDEX_COMPATIBILITY_MACROS".
Manual changes not made by coccinelle, that were squashed in:
* Whitespace-wrap argument lists for repo_hold_locked_index(),
repo_read_index_preload() and repo_refresh_and_write_index(), in cases
where the line became too long after the transformation.
* Change "refresh_cache()" to "refresh_index()" in a comment in
"builtin/update-index.c".
* For those whose call was followed by perror("<macro-name>"), change
it to perror("<function-name>"), referring to the new function.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Split up the "USE_THE_INDEX_COMPATIBILITY_MACROS" into that setting
and a more narrow "USE_THE_INDEX_VARIABLE". In the case of these
built-ins we only need "the_index" variable, but not the compatibility
wrapper for functions we're not using.
Let's then have some users of "USE_THE_INDEX_COMPATIBILITY_MACROS" use
this more narrow and descriptive define.
For context: The USE_THE_INDEX_COMPATIBILITY_MACROS macro was added to
test-tool.h in f8adbec9fe (cache.h: flip
NO_THE_INDEX_COMPATIBILITY_MACROS switch, 2019-01-24).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mostly apply the part of "index-compatibility.pending.cocci" that
renames the global variables like "active_nr", which are a shorthand
to referencing (in that case) a struct member as "the_index.cache_nr".
In doing so move more of "index-compatibility.pending.cocci" to
"index-compatibility.cocci".
In the case of "active_nr" we'd have a textual conflict with
"ab/various-leak-fixes" in "next"[1]. Let's exclude that specific case
while moving the rule over from "pending".
1. 407b94280f8 (commit: discard partial cache before (re-)reading it,
2022-11-08)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Apply a selection of rules in "index-compatibility.pending.cocci"
tree-wide, and in doing so migrate them to
"index-compatibility.cocci".
As in preceding commits the only manual changes here are the macro
removals in "cache.h", and the update to the '*.cocci" rules. The rest
of the C code changes are the result of applying those updated rules.
Move rules for some rarely used cache compatibility macros from
"index-compatibility.pending.cocci" to "index-compatibility.cocci" and
apply them.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The discard_index() function has not returned non-zero since
7a51ed66f6 (Make on-disk index representation separate from in-core
one, 2008-01-14), but we've had various code in-tree still acting as
though that might be the case.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 4aab5b46f4 (Make read-cache.c "the_index" free., 2007-04-01)
we've been undergoing a slow migration away from these macros, but
haven't made much progress since f8adbec9fe (cache.h: flip
NO_THE_INDEX_COMPATIBILITY_MACROS switch, 2019-01-24).
Let's move forward a bit by changing the users of those macros that
are rare enough that we can convert them in one go, and then remove
the compatibility shim.
The only manual change to the C code here is to "cache.h", the rest is
all the result of applying the new "index-compatibility.cocci".
Even though it's a one-off, let's keep the coccinelle rules for
now. We'll extend them in subsequent commits, and this will help
anything that's in-flight or out-of-tree to migrate.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Adding "USE_THE_INDEX_COMPATIBILITY_MACROS" to these two appears to
have been unnecessary from the start, as going back and compiling
f8adbec9fe (cache.h: flip NO_THE_INDEX_COMPATIBILITY_MACROS switch,
2019-01-24) without that addition works.
Let's not have these ask for the compatibility macros from cache.h
that they don't need.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Avoid calling 'cache_tree_update()' when doing so would be redundant.
* vd/skip-cache-tree-update:
rebase: use 'skip_cache_tree_update' option
read-tree: use 'skip_cache_tree_update' option
reset: use 'skip_cache_tree_update' option
unpack-trees: add 'skip_cache_tree_update' option
cache-tree: add perf test comparing update and prime
"git repack" learns to send cruft objects out of the way into
packfiles outside the repository.
* tb/repack-expire-to:
builtin/repack.c: implement `--expire-to` for storing pruned objects
builtin/repack.c: write cruft packs to arbitrary locations
builtin/repack.c: pass "cruft_expiration" to `write_cruft_pack`
builtin/repack.c: pass "out" to `prepare_pack_objects`
Since 52d59cc645 (branch: add a --copy (-c) option to go with --move
(-m), 2017-06-18) we can copy a branch to make a new branch with the
'-c' (copy) option or to overwrite an existing branch using the '-C'
(force copy) option. A no-op possibility is considered when we are
asked to copy a branch to itself, to follow the same no-op introduced
for the rename (-M) operation in 3f59481e33 (branch: allow a no-op
"branch -M <current-branch> HEAD", 2011-11-25). To check for this, in
52d59cc645 we compared the branch names provided by the user, source
(HEAD if omitted) and destination, and a match is considered as this
no-op.
Since ae5a6c3684 (checkout: implement "@{-N}" shortcut name for N-th
last branch, 2009-01-17) a branch can be specified using shortcuts like
@{-1}. This allows this usage:
$ git checkout -b test
$ git checkout -
$ git branch -C test test # no-op
$ git branch -C test @{-1} # oops
$ git branch -C @{-1} test # oops
As we are using the branch name provided by the user to do the
comparison, if one of the branches is provided using a shortcut we are
not going to have a match and a call to git_config_copy_section() will
happen. This will make a duplicate of the configuration for that
branch, and with this progression the second call will produce four
copies of the configuration, and so on.
Let's use the interpreted branch name instead for this comparison.
The rename operation is not affected.
Signed-off-by: Rubén Justo <rjusto@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
When serving a push, git-receive-pack(1) needs to verify that the
packfile sent by the client contains all objects that are required by
the updated references. This connectivity check works by marking all
preexisting references as uninteresting and using the new reference tips
as starting point for a graph walk.
Marking all preexisting references as uninteresting can be a problem
when it comes to performance. Git forges tend to do internal bookkeeping
to keep alive sets of objects for internal use or make them easy to find
via certain references. These references are typically hidden away from
the user so that they are neither advertised nor writeable. At GitLab,
we have one particular repository that contains a total of 7 million
references, of which 6.8 million are indeed internal references. With
the current connectivity check we are forced to load all these
references in order to mark them as uninteresting, and this alone takes
around 15 seconds to compute.
We can optimize this by only taking into account the set of visible refs
when marking objects as uninteresting. This means that we may now walk
more objects until we hit any object that is marked as uninteresting.
But it is rather unlikely that clients send objects that make large
parts of objects reachable that have previously only ever been hidden,
whereas the common case is to push incremental changes that build on top
of the visible object graph.
This provides a huge boost to performance in the mentioned repository,
where the vast majority of its refs hidden. Pushing a new commit into
this repo with `transfer.hideRefs` set up to hide 6.8 million of 7 refs
as it is configured in Gitaly leads to a 4.5-fold speedup:
Benchmark 1: main
Time (mean ± σ): 30.977 s ± 0.157 s [User: 30.226 s, System: 1.083 s]
Range (min … max): 30.796 s … 31.071 s 3 runs
Benchmark 2: pks-connectivity-check-hide-refs
Time (mean ± σ): 6.799 s ± 0.063 s [User: 6.803 s, System: 0.354 s]
Range (min … max): 6.729 s … 6.850 s 3 runs
Summary
'pks-connectivity-check-hide-refs' ran
4.56 ± 0.05 times faster than 'main'
As we mostly go through the same codepaths even in the case where there
are no hidden refs at all compared to the code before there is no change
in performance when no refs are hidden:
Benchmark 1: main
Time (mean ± σ): 48.188 s ± 0.432 s [User: 49.326 s, System: 5.009 s]
Range (min … max): 47.706 s … 48.539 s 3 runs
Benchmark 2: pks-connectivity-check-hide-refs
Time (mean ± σ): 48.027 s ± 0.500 s [User: 48.934 s, System: 5.025 s]
Range (min … max): 47.504 s … 48.500 s 3 runs
Summary
'pks-connectivity-check-hide-refs' ran
1.00 ± 0.01 times faster than 'main'
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Add a new `--exclude-hidden=` option that is similar to the one we just
added to git-rev-list(1). Given a section name `uploadpack` or `receive`
as argument, it causes us to exclude all references that would be hidden
by the respective `$section.hideRefs` configuration.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Users can optionally hide refs from remote users in git-upload-pack(1),
git-receive-pack(1) and others via the `transfer.hideRefs`, but there is
not an easy way to obtain the list of all visible or hidden refs right
now. We'll require just that though for a performance improvement in our
connectivity check.
Add a new option `--exclude-hidden=` that excludes any hidden refs from
the next pseudo-ref like `--all` or `--branches`.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
The functions that handle exclusion of refs work on a single string
list. We're about to add a second mechanism for excluding refs though,
and it makes sense to reuse much of the same architecture for both kinds
of exclusion.
Introduce a new `struct ref_exclusions` that encapsulates all the logic
related to excluding refs and move the `struct string_list` that holds
all wildmatch patterns of excluded refs into it. Rename functions that
operate on this struct to match its name.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
We're about to add a new argument to git-rev-list(1) that allows it to
add all references that are visible when taking `transfer.hideRefs` et
al into account. This will require us to potentially parse multiple sets
of hidden refs, which is not easily possible right now as there is only
a single, global instance of the list of parsed hidden refs.
Refactor `parse_hide_refs_config()` and `ref_is_hidden()` so that both
take the list of hidden references as input and adjust callers to keep a
local list, instead. This allows us to easily use multiple hidden-ref
lists. Furthermore, it allows us to properly free this list before we
exit.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
When `git notes` prepares the template it adds an empty newline between
the comment header and the content:
>
> #
> # Write/edit the notes for the following object:
>
> # commit 0f3c55d4c2b7864bffb2d92278eff08d0b2e083f
> # etc
This is wrong structurally because that newline is part of the comment,
too, and thus should be commented. Also, it throws off some positioning
strategies of editors and plugins, and it differs from how we do commit
templates.
Change this to follow the standard set by `git commit`:
>
> #
> # Write/edit the notes for the following object:
> #
> # commit 0f3c55d4c2b7864bffb2d92278eff08d0b2e083f
>
Tests pass unchanged after this code change.
Signed-off-by: Michael J Gruber <git@grubix.eu>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
While trying to fix a move based on an uninitialized value (along with a
declaration after the first statement), be0fd57228
(maintenance --unregister: fix uninit'd data use &
-Wdeclaration-after-statement, 2022-11-15) unintentionally introduced a
use-after-free.
The problem arises when `maintenance_unregister()` sees a non-NULL
`config_file` string and thus tries to call
git_configset_get_value_multi() to lookup the corresponding values.
We store the result off, and then call git_configset_clear(), which
frees the pointer that we just stored. We then try to read that
now-freed pointer a few lines below, and there we have our
use-after-free:
$ ./t7900-maintenance.sh -vxi --run=23 --valgrind
[...]
+ git maintenance unregister --config-file ./other
==3048727== Invalid read of size 8
==3048727== at 0x1869CA: maintenance_unregister (gc.c:1590)
==3048727== by 0x188F42: cmd_maintenance (gc.c:2651)
==3048727== by 0x128C62: run_builtin (git.c:466)
==3048727== by 0x12907E: handle_builtin (git.c:721)
==3048727== by 0x1292EC: run_argv (git.c:788)
==3048727== by 0x12988E: cmd_main (git.c:926)
==3048727== by 0x21ED39: main (common-main.c:57)
==3048727== Address 0x4b38bc8 is 24 bytes inside a block of size 64 free'd
==3048727== at 0x484617B: free (vg_replace_malloc.c:872)
==3048727== by 0x2D207E: free_individual_entries (hashmap.c:188)
==3048727== by 0x2D2153: hashmap_clear_ (hashmap.c:207)
==3048727== by 0x270B5C: git_configset_clear (config.c:2375)
==3048727== by 0x1869AC: maintenance_unregister (gc.c:1585)
==3048727== by 0x188F42: cmd_maintenance (gc.c:2651)
==3048727== by 0x128C62: run_builtin (git.c:466)
==3048727== by 0x12907E: handle_builtin (git.c:721)
==3048727== by 0x1292EC: run_argv (git.c:788)
==3048727== by 0x12988E: cmd_main (git.c:926)
==3048727== by 0x21ED39: main (common-main.c:57)
[...]
Resolve this via a partial-revert of be0fd57228. The config_set struct
now gets a zero initialization, which makes free()-ing it a noop even
without calling git_configset_init(). When we do initialize it to a
non-zero value, it is only free()'d after our last read of `list`.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Since (maintenance: add option to register in a specific config,
2022-11-09) we've been unable to build with "DEVELOPER=1" without
"DEVOPTS=no-error", as the added code triggers a
"-Wdeclaration-after-statement" warning.
And worse than that, the data handed to git_configset_clear() is
uninitialized, as can be spotted with e.g.:
./t7900-maintenance.sh -vixd --run=23 --valgrind
[...]
+ git maintenance unregister --force
Conditional jump or move depends on uninitialised value(s)
at 0x6B5F1E: git_configset_clear (config.c:2367)
by 0x4BA64E: maintenance_unregister (gc.c:1619)
by 0x4BD278: cmd_maintenance (gc.c:2650)
by 0x409905: run_builtin (git.c:466)
by 0x40A21C: handle_builtin (git.c:721)
by 0x40A58E: run_argv (git.c:788)
by 0x40AF68: cmd_main (git.c:926)
by 0x5D39FE: main (common-main.c:57)
Uninitialised value was created by a stack allocation
at 0x4BA22C: maintenance_unregister (gc.c:1557)
Let's fix both of these issues, and also move the scope of the
variable to the "if" statement it's used in, to make it obvious where
it's used.
Helped-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
maintenance register currently records the maintenance repo exclusively
within the user's global configuration, but other configuration files
may be relevant when running maintenance if they are included from the
global config. This option allows the user to choose where maintenance
repos are recorded.
Signed-off-by: Ronan Pigott <ronan@rjp.ie>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
This is a quality of life change for git-maintenance, so repos can be
recorded with the tilde syntax. The register subcommand will not record
repos in this format by default.
Signed-off-by: Ronan Pigott <ronan@rjp.ie>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Git learned pushing submodules without pushing the superproject by
the user specifying --recurse-submodules=only through 6c656c3fe4
("submodules: add RECURSE_SUBMODULES_ONLY value", 2016-12-20) and
225e8bf778 ("push: add option to push only submodules", 2016-12-20).
For users who use this feature regularly, it is desirable to have an
equivalent configuration.
It turns out that such a configuration (push.recurseSubmodules=only) is
already supported, even though it is neither documented nor mentioned
in the commit messages, due to the way the --recurse-submodules=only
feature was implemented (a function used to parse --recurse-submodules
was updated to support "only", but that same function is used to parse
push.recurseSubmodules too). What is left is to document it and test it,
which is what this commit does.
There is a possible point of confusion when recursing into a submodule
that itself has the push.recurseSubmodules=only configuration, because
if a repository has only its submodules pushed and not itself, its
superproject can never be pushed. Therefore, treat such configurations
as being "on-demand", and print a warning message.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
The previous commit added a `--merge-base` option in order to allow
using a specified merge-base for the merge. Extend the input accepted
by `--stdin` to also allow a specified merge-base with each merge
requested. For example:
printf "<b3> -- <b1> <b2>" | git merge-tree --stdin
does a merge of b1 and b2, and uses b3 as the merge-base.
Signed-off-by: Kyle Zhao <kylezhao@tencent.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
This patch will give our callers more flexibility to use `git merge-tree`,
such as:
git merge-tree --write-tree --merge-base=branch^ HEAD branch
This does a merge of HEAD and branch, but uses branch^ as the merge-base.
And the reason why using an option flag instead of a positional argument
is to allow additional commits passed to merge-tree to be handled via an
octopus merge in the future.
Signed-off-by: Kyle Zhao <kylezhao@tencent.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Now that the shell script hands off to the `bisect--helper` to do
_anything_ (except to show the help), it is but a tiny step to let the
helper implement the actual `git bisect` command instead.
This retires `git-bisect.sh`, concluding a multi-year journey that many
hands helped with, in particular Pranit Bauna, Tanushree Tumane and
Miriam Rubio.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
In a later change, we would like to turn bisect into a builtin by
renaming bisect--helper.
However, there's an oddity that "git bisect log" accepts any number of
arguments and it will just ignore them all.
Let's prepare for the next step by ignoring any arguments passed to
"git bisect--helper log"
Signed-off-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
In preparation for making `git bisect` a real built-in, let's prepare
the `bisect--helper` built-in to handle `git bisect--helper good` and
`git bisect--helper bad`, i.e. eliminate the need of `state` subcommand.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
In subsequent commits we'll be removing "git-bisect.sh" in favor of
promoting "bisect--helper" to a "bisect" built-in.
In doing that we'll first need to have it support "git bisect--helper
<cmd>" rather than "git bisect--helper --<cmd>", and then finally have
its "-h" output claim to be "bisect" rather than "bisect--helper".
Instead of suffering that churn let's start claiming to be "git
bisect" now. In just a few commits this will be true, and in the
meantime emitting the "wrong" usage information from the helper is a
small price to pay to avoid the churn.
Let's also declare "BUILTIN_*" macros, when we eventually migrate the
sub-commands themselves to parse_options() we'll be able to re-use the
strings. See 0afd556b2e (worktree: define subcommand -h in terms of
command -h, 2022-10-13) for a recent example.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
In a later change, we will convert the bisect--helper to be builtin
bisect. Let's start by self-identifying it's the real bisect when reporting
error.
This change is safe since 'git bisect--helper' is an implementation
detail, users aren't expected to call 'git bisect--helper'.
Signed-off-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Some system never reports negative exit code at all, they reports them
as bigger-than-128 instead. We take extra care for those systems in the
later check for normal 'do_bisect_run' loop.
Let's check it here, too.
Signed-off-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Preceding commits fixed output and behavior regressions in
d1bbbe45df (bisect--helper: reimplement `bisect_run` shell function
in C, 2021-09-13), which did not claim to be changing the output of
"git bisect run".
But some of the output it emitted was subjectively better, so once
we've asserted that we're back on v2.29.0 behavior, let's change some
of it back:
- We now quote the arguments again, but omit the first " " when
printing the "running" line.
- Ditto for other cases where we emitted the argument
- We say "found first bad commit" again, not just "run success"
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Based-on-patch-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
When d1bbbe45df (bisect--helper: reimplement `bisect_run` shell
function in C, 2021-09-13) reimplemented parts of "git bisect run" in
C it changed the output we emitted so that:
- The "running ..." line was now quoted
- We lost the \n after our output
- We started saying "bisect found ..." instead of "bisect run success"
Arguably some of this is better now, but as d1bbbe45df did not
advocate for changing the output, let's revert this for now. It'll be
easy to change it back if that's what we'd prefer.
This does not change the one remaining use of "command.buf" to emit
the quoted argument, as that's new in d1bbbe45df.
Some of these cases were not tested for in the tests added in the
preceding commit, I didn't have time to fleshen those out, but a look
at f1de981e8b will show that the other output being adjusted here is
now equivalent to what it was before d1bbbe45df.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
We didn't add "{}" to all "if/else" branches, and one "error" was
mis-indented. Let's fix that first, which makes subsequent commits
smaller. In the case of the "if" we can simply early return instead.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
* dd/bisect-helper-subcommand:
bisect--helper: parse subcommand with OPT_SUBCOMMAND
bisect--helper: move all subcommands into their own functions
bisect--helper: remove unused options
As of it is, we're parsing subcommand with OPT_CMDMODE, which will
continue to parse more options even if the command has been found.
When we're running "git bisect run" with a command that expecting
a "--log" or "--no-log" arguments, or one of those "--bisect-..."
arguments, bisect--helper may mistakenly think those options are
bisect--helper's option.
We may fix those problems by passing "--" when calling from
git-bisect.sh, and skip that "--" in bisect--helper. However, it may
interfere with user's "--".
Let's parse subcommand with OPT_SUBCOMMAND since that API was born for
this specific use-case.
Reported-by: Lukáš Doktor <ldoktor@redhat.com>
Signed-off-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
In a later change, we will use OPT_SUBCOMMAND to parse sub-commands to
avoid consuming non-option opts.
Since OPT_SUBCOMMAND needs a function pointer to operate,
let's move it now.
Signed-off-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
'git-bisect.sh' used to have a 'bisect_next_check' to check if we have
both good/bad, old/new terms set or not. In commit 129a6cf344
(bisect--helper: `bisect_next_check` shell function in C, 2019-01-02),
a subcommand for bisect--helper was introduced to port the check to C.
Since d1bbbe45df (bisect--helper: reimplement `bisect_run` shell
function in C, 2021-09-13), all users of 'bisect_next_check' was
re-implemented in C, this subcommand was no longer used but we forgot
to remove '--bisect-next-check'.
'git-bisect.sh' also used to have a 'bisect_write' function, whose
third positional parameter was a "nolog" flag. This flag was only used
when 'bisect_start' invoked 'bisect_write' to write the starting good
and bad revisions. Then 0f30233a11 (bisect--helper: `bisect_write`
shell function in C, 2019-01-02) ported it to C as a command mode of
'bisect--helper', which (incorrectly) added the '--no-log' option,
and convert the only place ('bisect_start') that call 'bisect_write'
with 'nolog' to 'git bisect--helper --bisect-write' with 'nolog'
instead of '--no-log', since 'bisect--helper' has command modes not
subcommands, all other command modes see and handle that option as well.
This bogus state didn't last long, however, because in the same patch
series 06f5608c14 (bisect--helper: `bisect_start` shell function
partially in C, 2019-01-02) the C reimplementation of bisect_start()
started calling the bisect_write() C function, this time with the
right 'nolog' function parameter. From then on there was no need for
the '--no-log' option in 'bisect--helper'. Eventually all bisect
subcommands were ported to C as 'bisect--helper' command modes, each
calling the bisect_write() C function instead, but when the
'--bisect-write' command mode was removed in 68efed8c8a
(bisect--helper: retire `--bisect-write` subcommand, 2021-02-03) it
forgot to remove that '--no-log' option.
'--no-log' option had never been used and it's unused now.
Let's remove --bisect-next-check and --no-log from option parsing.
Signed-off-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
When running 'read-tree' with a single tree and no prefix,
'prime_cache_tree()' is called after the tree is unpacked. In that
situation, skip a redundant call to 'cache_tree_update()' in
'unpack_trees()' by enabling the 'skip_cache_tree_update' unpack option.
Removing the redundant cache tree update provides a substantial performance
improvement to 'git read-tree <tree-ish>', as shown by a test added to
'p0006-read-tree-checkout.sh':
Test before after
----------------------------------------------------------------------
read-tree br_ballast_plus_1 3.94(1.80+1.57) 3.00(1.14+1.28) -23.9%
Note that the 'read-tree' in 't1022-read-tree-partial-clone.sh' is updated
to read two trees, rather than one. The test was first introduced in
d3da223f22 (cache-tree: prefetch in partial clone read-tree, 2021-07-23) to
exercise the 'cache_tree_update()' code path, as used in 'git merge'. Since
this patch drops the call to 'cache_tree_update()' in single-tree 'git
read-tree', change the test to use the two-tree variant so that
'cache_tree_update()' is called as intended.
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Enable the 'skip_cache_tree_update' option in the variants that call
'prime_cache_tree()' after 'unpack_trees()' (specifically, 'git reset
--mixed' and 'git reset --hard'). This avoids redundantly rebuilding the
cache tree in both 'cache_tree_update()' at the end of 'unpack_trees()' and
in 'prime_cache_tree()', resulting in a small (but consistent) performance
improvement. From the newly-added 'p7102-reset.sh' test:
Test before after
--------------------------------------------------------------------
7102.1: reset --hard (...) 2.11(0.40+1.54) 1.97(0.38+1.47) -6.6%
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
When deleting a branch, "git branch -d" has a safety check that ensures
the branch is merged to its upstream (if any), or to HEAD. To do that,
naturally we try to resolve HEAD to a commit object. If we're on an
orphan branch (i.e., HEAD points to a branch that does not yet exist),
that will fail, and we'll bail with an error:
$ git branch -d to-delete
fatal: Couldn't look up commit object for HEAD
This usually isn't that big of a deal. The deletion would fail anyway,
since the branch isn't merged to HEAD, and you'd need to use "-D" (or
"-f"). And doing so skips the HEAD resolution, courtesy of 67affd5173
(git-branch -D: make it work even when on a yet-to-be-born branch,
2006-11-24).
But there are still two problems:
1. The error message isn't very helpful. We should give the usual "not
fully merged" message, which points the user at "branch -D". That
was a problem even back in 67affd5173.
2. Even without a HEAD, these days it's still possible for the
deletion to succeed. After 67affd5173, commit 99c419c915 (branch
-d: base the "already-merged" safety on the branch it merges with,
2009-12-29) made it OK to delete a branch if it is merged to its
upstream.
We can fix both by removing the die() in delete_branches() completely,
leaving head_rev NULL in this case. It's tempting to stop there, as it
appears at first glance that the rest of the code does the right thing
with a NULL. But sadly, it's not quite true.
We end up feeding the NULL to repo_is_descendant_of(). In the
traditional code path there, we call repo_in_merge_bases_many(). It
feeds the NULL to repo_parse_commit(), which is smart enough to return
an error, and we immediately return "no, it's not a descendant".
But there's an alternate code path: if we have a commit graph with
generation numbers, we end up in can_all_from_reach(), which does
eventually try to set a flag on the NULL commit and segfaults.
So instead, we'll teach the local branch_merged() helper to treat a NULL
as "not merged". This would be a little more elegant in in_merge_bases()
itself, but that function is called in a lot of places, and it's not
clear that quietly returning "not merged" is the right thing everywhere
(I'd expect in many cases, feeding a NULL is a sign of a bug).
There are four tests here:
a. The first one confirms that deletion succeeds with an orphaned HEAD
when the branch is merged to its upstream. This is case (2) above.
b. Same, but with commit graphs enabled. Even if it is merged to
upstream, we still check head_rev so that we can say "deleting
because it's merged to upstream, even though it's not merged to
HEAD". Without the second hunk in branch_merged(), this test would
segfault in can_all_from_reach().
c. The third one confirms that we correctly say "not merged to HEAD"
when we can't resolve HEAD, and reject the deletion.
d. Same, but with commit graphs enabled. Without the first hunk in
branch_merged(), this one would segfault.
Reported-by: Martin von Zweigbergk <martinvonz@google.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Now that struct replay_opts has a reflog_action member we no longer
need to export GIT_REFLOG_ACTION when starting a rebase. If the user
has set GIT_REFLOG_ACTION then we use it when initializing
reflog_action.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Reviewed-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Simplify the run-command API.
* rs/no-more-run-command-v:
replace and remove run_command_v_opt()
replace and remove run_command_v_opt_cd_env_tr2()
replace and remove run_command_v_opt_tr2()
replace and remove run_command_v_opt_cd_env()
use child_process members "args" and "env" directly
use child_process member "args" instead of string array variable
sequencer: simplify building argument list in do_exec()
bisect--helper: factor out do_bisect_run()
bisect: simplify building "checkout" argument list
am: simplify building "show" argument list
run-command: fix return value comment
merge: remove always-the-same "verbose" arguments
Enable gc.cruftpacks by default for those who opt into
feature.experimental setting.
* es/mark-gc-cruft-as-experimental:
config: let feature.experimental imply gc.cruftPacks=true
gc: add tests for --cruft and friends
Have the cmd_submodule__helper() use the OPT_SUBCOMMAND() API
introduced in fa83cc834d (parse-options: add support for parsing
subcommands, 2022-08-19).
This is only a marginal reduction in line count, but once we start
unifying this with a yet-to-be-added "builtin/submodule.c" it'll be
much easier to reason about those changes, as they'll both use
OPT_SUBCOMMAND().
We don't need to worry about "argv[0]" being NULL in the die() because
we'd have errored out in parse_options() as we're not using
"PARSE_OPT_SUBCOMMAND_OPTIONAL".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Since 29a5e9e1ff (submodule--helper update-clone: learn --init,
2022-03-04) we've been passing "-C <prefix>" from "git-submodule.sh"
whenever we pass "--prefix <prefix>", so the latter is redundant to
the former. Let's drop the "--prefix" option.
Suggested-by: Glen Choo <chooglen@google.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Let's pass the "-C <prefix>" option instead to "absorbgitdirs" from
its only caller.
When it was added in f6f8586140 (submodule: add absorb-git-dir
function, 2016-12-12) there were other "submodule--helper" subcommands
that were invoked with "-C <prefix>", so we could have done this all
along.
Suggested-by: Glen Choo <chooglen@google.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Remove the "----recursive" option to "git submodule--helper
absorbgitdirs" (yes, with 4 dashes, not 2).
This option and all the "else" when "flags &
ABSORB_GITDIR_RECURSE_SUBMODULES" is false has never been used since
it was added in f6f8586140 (submodule: add absorb-git-dir function,
2016-12-12), which we'd have had to do as "----recursive", a
"--recursive" would have errored out.
It would be nice to follow-up with an optbug() assertion to
parse-options.c for such funnily named options, I manually validated
that this was the only long option whose name started with "-", but
let's skip adding such an assertion for now.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
The "status" sub-command was leaking the "struct strvec" it was
setting up for the reasons explained in f92dbdbc6a (revisions API:
don't leak memory on argv elements that need free()-ing, 2022-08-02),
so let's use the "free_removed_argv_elements" option to
setup_revisions() to fix the leak.
Even if we did that, clobbering the "diff_files_args.nr" with the
return value of setup_revisions() would leave leaks in place, but we
can just stop clobbering it.
Ever since that code was added in a9f8a37584 (submodule: port
submodule subcommand 'status' from shell to C, 2017-10-06) we've had
no reason to modify the "nr" member ("argc" at the time): The next use
of "diff_files_args" after this is the "strvec_clear()" at the end of
the function.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
As with other moves to "test-tool" in f322e9f51b (Merge branch
'ab/submodule-helper-prep', 2022-09-13) the "config" sub-command was
only used by our own tests.
It was last used by "git submodule" itself in code that went away with
a6226fd772 (submodule--helper: convert the bulk of cmd_add() to C,
2021-08-10).
Let's move it over, and while doing so make it easier to reason about
by splitting up the various uses for it into separate sub-commands, so
that we don't need to count arguments to see what it does.
This also has the advantage that we stop wasting future translator
time on this command, currently the usage information for this
internal-only tool has been translated into several languages. The use
of the "_" function has also been removed from the "please make
sure..." message.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
"git merge-tree --stdin" is a new way to request a series of merges
and report the merge results.
* en/merge-tree-sequence:
merge-tree: support multiple batched merges with --stdin
merge-tree: update documentation for differences in -z output
Define the logical elements of a "bundle list", data structure to
store them in-core, format to transfer them, and code to parse
them.
* ds/bundle-uri-3:
bundle-uri: suppress stderr from remote-https
bundle-uri: quiet failed unbundlings
bundle: add flags to verify_bundle()
bundle-uri: fetch a list of bundles
bundle: properly clear all revision flags
bundle-uri: limit recursion depth for bundle lists
bundle-uri: parse bundle list in config format
bundle-uri: unit test "key=value" parsing
bundle-uri: create "key=value" line parsing
bundle-uri: create base key-value pair parsing
bundle-uri: create bundle_list struct and helpers
bundle-uri: use plain string in find_temp_filename()
"git branch --edit-description" can exit with status -1 which is
not a good practice; it learned to use 1 as everybody else instead.
* rj/branch-do-not-exit-with-minus-one-status:
branch: error code with --edit-description
Fix some bugs in the reflog messages when rebasing and changes the
reflog messages of "rebase --apply" to match "rebase --merge" with
the aim of making the reflog easier to parse.
* pw/rebase-reflog-fixes:
rebase: cleanup action handling
rebase --abort: improve reflog message
rebase --apply: make reflog messages match rebase --merge
rebase --apply: respect GIT_REFLOG_ACTION
rebase --merge: fix reflog message after skipping
rebase --merge: fix reflog when continuing
t3406: rework rebase reflog tests
rebase --apply: remove duplicated code
"git rebase --keep-base" used to discard the commits that are
already cherry-picked to the upstream, even when "keep-base" meant
that the base, on top of which the history is being rebuilt, does
not yet include these cherry-picked commits. The --keep-base
option now implies --reapply-cherry-picks and --no-fork-point
options.
* pw/rebase-keep-base-fixes:
rebase --keep-base: imply --no-fork-point
rebase --keep-base: imply --reapply-cherry-picks
rebase: factor out branch_base calculation
rebase: rename merge_base to branch_base
rebase: store orig_head as a commit
rebase: be stricter when reading state files containing oids
t3416: set $EDITOR in subshell
t3416: tighten two tests
"git shortlog" learned to group by the "format" string.
* tb/shortlog-group:
shortlog: implement `--group=committer` in terms of `--group=<format>`
shortlog: implement `--group=author` in terms of `--group=<format>`
shortlog: extract `shortlog_finish_setup()`
shortlog: support arbitrary commit format `--group`s
shortlog: extract `--group` fragment for translation
shortlog: make trailer insertion a noop when appropriate
shortlog: accept `--date`-related options
The way "git repack" creared temporary files when it received a
signal was prone to deadlocking, which has been corrected.
* jk/repack-tempfile-cleanup:
t7700: annotate cruft-pack failure with ok=sigpipe
repack: drop remove_temporary_files()
repack: use tempfiles for signal cleanup
repack: expand error message for missing pack files
repack: populate extension bits incrementally
repack: convert "names" util bitfield to array
A new "--include-whitespace" option is added to "git patch-id", and
existing bugs in the internal patch-id logic that did not match
what "git patch-id" produces have been corrected.
* jz/patch-id:
builtin: patch-id: remove unused diff-tree prefix
builtin: patch-id: add --verbatim as a command mode
patch-id: fix patch-id for mode changes
builtin: patch-id: fix patch-id with binary diffs
patch-id: use stable patch-id for rebases
patch-id: fix stable patch id for binary / header-only
Replace the remaining calls of run_command_v_opt() with run_command()
calls and explict struct child_process variables. This is more verbose,
but not by much overall. The code becomes more flexible, e.g. it's easy
to extend to conditionally add a new argument.
Then remove the now unused function and its own flag names, simplifying
the run-command API.
Suggested-by: Jeff King <peff@peff.net>
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Build argument list and environment of child processes by using
struct child_process and populating its members "args" and "env"
directly instead of maintaining separate strvecs and letting
run_command_v_opt() and friends populate these members. This is
simpler, shorter and slightly more efficient.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Use run_command() with a struct child_process variable and populate its
"args" member directly instead of building a string array and passing it
to run_command_v_opt(). This avoids the use of magic index numbers and
makes simplifies the possible addition of more arguments in the future.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Deduplicate the code for reporting and starting the bisect run command
by moving it to a short helper function. Use a string array instead of
a strvec to prepare the arguments, for simplicity.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Build the string array av during initialization, without any magic
numbers or heap allocations. Not duplicating the result of oid_to_hex()
is safe because run_command_v_opt() duplicates all arguments already.
(It would even be safe if it didn't, but that's a different story.)
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Simplify the code that builds the arguments for the "read-tree"
invocation in reset_hard() and read_empty() to remove the "verbose"
parameter.
Before 172b6428d0 (do not overwrite untracked during merge from
unborn branch, 2010-11-14) there was a "reset_hard()" function that
would be called in two places, one of those passed a "verbose=1", the
other a "verbose=0".
After 172b6428d0 when read_empty() was split off from reset_hard()
both of these functions only had one caller. The "verbose" in
read_empty() would always be false, and the one in reset_hard() would
always be true.
There was never a good reason for the code to act this way, it
happened because the read_empty() function was a copy/pasted and
adjusted version of reset_hard().
Since we're no longer conditionally adding the "-v" parameter
here (and we'd only add it for "reset_hard()" we'll be able to move to
a simpler and safer run-command API in the subsequent commit.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
When creating a multi-pack bitmap, remove per-pack bitmap files
unconditionally as they will never be consulted.
* tb/remove-unused-pack-bitmap:
builtin/repack.c: remove redundant pack-based bitmaps
The short-help text shown by "git cmd -h" and the synopsis text
shown at the beginning of "git help cmd" have been made more
consistent.
* ab/doc-synopsis-and-cmd-usage: (34 commits)
tests: assert consistent whitespace in -h output
tests: start asserting that *.txt SYNOPSIS matches -h output
doc txt & -h consistency: make "worktree" consistent
worktree: define subcommand -h in terms of command -h
reflog doc: list real subcommands up-front
doc txt & -h consistency: make "commit" consistent
doc txt & -h consistency: make "diff-tree" consistent
doc txt & -h consistency: use "[<label>...]" for "zero or more"
doc txt & -h consistency: make "annotate" consistent
doc txt & -h consistency: make "stash" consistent
doc txt & -h consistency: add missing options
doc txt & -h consistency: use "git foo" form, not "git-foo"
doc txt & -h consistency: make "bundle" consistent
doc txt & -h consistency: make "read-tree" consistent
doc txt & -h consistency: make "rerere" consistent
doc txt & -h consistency: add missing options and labels
doc txt & -h consistency: make output order consistent
doc txt & -h consistency: add or fix optional "--" syntax
doc txt & -h consistency: fix mismatching labels
doc SYNOPSIS & -h: use "-" to separate words in labels, not "_"
...
"git branch --edit-description" on an unborh branch misleadingly
said that no such branch exists, which has been corrected.
* rj/branch-edit-desc-unborn:
branch: description for non-existent branch errors
Move a global variable added as a hack during regression fixes to
its proper place in the API.
* ab/run-hook-api-cleanup:
run-command.c: remove "max_processes", add "const" to signal() handler
run-command.c: pass "opts" further down, and use "opts->processes"
run-command.c: use "opts->processes", not "pp->max_processes"
run-command.c: don't copy "data" to "struct parallel_processes"
run-command.c: don't copy "ungroup" to "struct parallel_processes"
run-command.c: don't copy *_fn to "struct parallel_processes"
run-command.c: make "struct parallel_processes" const if possible
run-command API: move *_tr2() users to "run_processes_parallel()"
run-command API: have run_process_parallel() take an "opts" struct
run-command.c: use designated init for pp_init(), add "const"
run-command API: don't fall back on online_cpus()
run-command API: make "n" parameter a "size_t"
run-command tests: use "return", not "exit"
run-command API: have "run_processes_parallel{,_tr2}()" return void
run-command test helper: use "else if" pattern
When geometric repacking feature is in use together with the
--pack-kept-objects option, we lost packs marked with .keep files.
* tb/save-keep-pack-during-geometric-repack:
repack: don't remove .keep packs with `--pack-kept-objects`
More UNUSED annotation to help using -Wunused option with the
compiler.
* jk/unused-anno-more:
ll-merge: mark unused parameters in callbacks
diffcore-pickaxe: mark unused parameters in pickaxe functions
convert: mark unused parameter in null stream filter
apply: mark unused parameters in noop error/warning routine
apply: mark unused parameters in handlers
date: mark unused parameters in handler functions
string-list: mark unused callback parameters
object-file: mark unused parameters in hash_unknown functions
mark unused parameters in trivial compat functions
update-index: drop unused argc from do_reupdate()
submodule--helper: drop unused argc from module_list_compute()
diffstat_consume(): assert non-zero length
We are interested in exploring whether gc.cruftPacks=true should become
the default value.
To determine whether it is safe to do so, let's encourage more users to
try it out.
Users who have set feature.experimental=true have already volunteered to
try new and possibly-breaking config changes, so let's try this new
default with that set of users.
Signed-off-by: Emily Shaffer <emilyshaffer@google.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since c2d17ba3db (branch --edit-description: protect against mistyped
branch name, 2012-02-05) we return -1 on error editing the branch
description.
Let's change to 1, which follows the established convention and it is
better for portability reasons.
Signed-off-by: Rubén Justo <rjusto@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In c847f53712 (Detached HEAD (experimental), 2007-01-01) an error
condition was introduced in rename_branch() to prevent renaming, later
also copying, a detached HEAD.
The condition used was checking for NULL in oldname, the source branch
to rename/copy. That condition cannot be satisfied because if no source
branch is specified, HEAD is going to be used in the call.
The error issued instead is:
fatal: Invalid branch name: 'HEAD'
Let's remove the condition in copy_or_rename_branch() (the current
function name) and check for HEAD before calling it, dying with the
original intended error if we're in a detached HEAD.
Signed-off-by: Rubén Justo <rjusto@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git diff rev^!" did not show combined diff to go to the rev from
its parents.
* rs/diff-caret-bang-with-parents:
diff: support ^! for merges
revisions.txt: unspecify order of resolved parts of ^!
revision: use strtol_i() for exclude_parent
Code clean-up.
* jk/cleanup-callback-parameters:
attr: drop DEBUG_ATTR code
commit: avoid writing to global in option callback
multi-pack-index: avoid writing to global in option callback
test-submodule: inline resolve_relative_url() function
