The for_each_string_list_item() macro takes a string_list and
automatically constructs a for loop to iterate over its contents. This
macro will segfault if the list is non-NULL.
We cannot change the macro to be careful around NULL values because
there are many callers that use the address of a local variable, which
will never be NULL and will cause compile errors with -Werror=address.
For now, leave a documentation comment to try to avoid mistakes in the
future where a caller does not check for a NULL list.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'git maintenance [un]register' commands set or unset the multi-
valued maintenance.repo config key with the absolute path of the current
repository. These are set in the global config file.
Instead of calling a subcommand and creating a new process, create the
proper API calls to git_config_set_multivar_in_file_gently(). It
requires loading the filename for the global config file (and erroring
out if now $HOME value is set). We also need to be careful about using
CONFIG_REGEX_NONE when adding the value and using
CONFIG_FLAGS_FIXED_VALUE when removing the value. In both cases, we
check that the value already exists (this check already existed for
'unregister').
Also, remove the transparent translation of the error code from the
config API to the exit code of 'git maintenance'. Instead, use die() to
recover from failures at that level. In the case of 'unregister
--force', allow the CONFIG_NOTHING_SET error code to be a success. This
allows a possible race where another process removes the config value.
The end result is that the config value is not set anymore, so we can
treat this as a success.
Reported-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'scalar unregister' command removes a repository from the list of
registered Scalar repositories and removes it from the list of
repositories registered for background maintenance. If the repository
was not already registered for background maintenance, then the command
fails, even if the repository was still registered as a Scalar
repository.
After using 'scalar clone' or 'scalar register', the repository would be
enrolled in background maintenance since those commands run 'git
maintenance start'. If the user runs 'git maintenance unregister' on
that repository, then it is still in the list of repositories which get
new config updates from 'scalar reconfigure'. The 'scalar unregister'
command would fail since 'git maintenance unregister' would fail.
Further, the add_or_remove_enlistment() method in scalar.c already has
this idempotent nature built in as an expectation since it returns zero
when the scalar.repo list already has the proper containment of the
repository.
The previous change added the 'git maintenance unregister --force'
option, so use it within 'scalar unregister' to make it idempotent.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'git maintenance unregister' subcommand has a step that removes the
current repository from the multi-valued maitenance.repo config key.
This fails if the repository is not listed in that key. This makes
running 'git maintenance unregister' twice result in a failure in the
second instance.
This failure exit code is helpful, but its message is not. Add a new
die() message that explicitly calls out the failure due to the
repository not being registered.
In some cases, users may want to run 'git maintenance unregister' just
to make sure that background jobs will not start on this repository, but
they do not want to check to see if it is registered first. Add a new
'--force' option that will siltently succeed if the repository is not
already registered.
Also add an extra test of 'git maintenance unregister' at a point where
there are no registered repositories. This should fail without --force.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"make clean" stopped cleaning the test results directory as a side
effect of a topic that has nothing to do with "make clean", which
has been corrected.
* sg/clean-test-results:
t/Makefile: remove 'test-results' on 'make clean'
A result from opendir() was leaking in the commit-graph expiration
codepath, which has been plugged.
* ml/commit-graph-expire-dir-leak-fix:
commit-graph: Fix missing closedir in expire_commit_graphs
These strings are not translatable in the diagnose_options array in
diagnose.c. Don't translate them in builtin/diagnose.c either.
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 't/test-results' directory and its contents are by-products of the
test process, so 'make clean' should remove them, but, alas, this has
been broken since fee65b194d (t/Makefile: don't remove test-results in
"clean-except-prove-cache", 2022-07-28).
The 'clean' target in 't/Makefile' was not directly responsible for
removing the 'test-results' directory, but relied on its dependency
'clean-except-prove-cache' to do that [1]. ee65b194d broke this,
because it only removed the 'rm -r test-results' command from the
'clean-except-prove-cache' target instead of moving it to the 'clean'
target, resulting in stray 't/test-results' directories.
Add that missing cleanup command to 't/Makefile', and to all
sub-Makefiles touched by that commit as well.
[1] 60f26f6348 (t/Makefile: retain cache t/.prove across prove runs,
2012-05-02)
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The command you type is still "git maintenance" even in other languages.
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Used GNU "aspell check <filename>" to review various technical
documentation files with the default aspell dictionary. Ignored
false-positives between american and british english.
Signed-off-by: Jacob Stopak <jacob@initialcommit.io>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Used GNU "aspell check <filename>" to review various documentation
files with the default aspell dictionary. Ignored false-positives
between american and british english.
Signed-off-by: Jacob Stopak <jacob@initialcommit.io>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Like most builtins, 'version' is documented in a corresponding
'Documentation/git-version.txt' and can be invoked with 'git version'.
However, the 'check-docs' Makefile target showed that it was "removed but
documented: git-version." This was cause by the fact that it is not built as
a standalone 'git-version' executable, therefore appearing "removed" to
'check-docs'.
Without a precedent for documented builtins that aren't built into an
executable *or* any clear reason why a standalone 'git-version' shouldn't
exist, the 'check-docs' error appears to correctly identify an issue. To
correct that mismatch, add 'git-version' to the 'BUILT_INS' list in the root
Makefile (indicating that the 'cmd_version()' function appears in a file
that is *not* 'builtin/version.c'). Additionally, to avoid the "no link"
message in 'check-docs', list 'git-version' as an "ancilliaryinterrogator"
(like 'git help') in 'command-list.txt'.
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add 'git diagnose' as an "ancilliaryinterrogator" (like 'git bugreport') to
'command-list.txt' in order to have it show up in 'git help -a' and avoid
the "no link" warning message from the 'check-docs' Makefile target.
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a reviewing guidelines document including advice and common terminology
used in Git mailing list reviews. The document is included in the
'TECH_DOCS' list in order to include it in Git's published documentation.
Helped-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Helped-by: Derrick Stolee <derrickstolee@github.com>
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Hoist the remainder of "scalar" out of contrib/ to the main part of
the codebase.
* vd/scalar-to-main:
Documentation/technical: include Scalar technical doc
t/perf: add 'GIT_PERF_USE_SCALAR' run option
t/perf: add Scalar performance tests
scalar-clone: add test coverage
scalar: add to 'git help -a' command list
scalar: implement the `help` subcommand
git help: special-case `scalar`
scalar: include in standard Git build & installation
scalar: fix command documentation section header
Revamp chainlint script for our tests.
* es/chainlint:
chainlint: colorize problem annotations and test delimiters
t: retire unused chainlint.sed
t/Makefile: teach `make test` and `make prove` to run chainlint.pl
test-lib: replace chainlint.sed with chainlint.pl
test-lib: retire "lint harder" optimization hack
t/chainlint: add more chainlint.pl self-tests
chainlint.pl: allow `|| echo` to signal failure upstream of a pipe
chainlint.pl: complain about loops lacking explicit failure handling
chainlint.pl: don't flag broken &&-chain if failure indicated explicitly
chainlint.pl: don't flag broken &&-chain if `$?` handled explicitly
chainlint.pl: don't require `&` background command to end with `&&`
t/Makefile: apply chainlint.pl to existing self-tests
chainlint.pl: don't require `return|exit|continue` to end with `&&`
chainlint.pl: validate test scripts in parallel
chainlint.pl: add parser to identify test definitions
chainlint.pl: add parser to validate tests
chainlint.pl: add POSIX shell parser
chainlint.pl: add POSIX shell lexical analyzer
t: add skeleton chainlint.pl
A couple of bugfixes with code clean-up.
* jk/list-objects-filter-cleanup:
list-objects-filter: convert filter_spec to a strbuf
list-objects-filter: add and use initializers
list-objects-filter: handle null default filter spec
list-objects-filter: don't memset after releasing filter struct
"git mv A B" in a sparsely populated working tree can be asked to
move a path from a directory that is "in cone" to another directory
that is "out of cone". Handling of such a case has been improved.
* sy/mv-out-of-cone:
builtin/mv.c: fix possible segfault in add_slash()
mv: check overwrite for in-to-out move
advice.h: add advise_on_moving_dirty_path()
mv: cleanup empty WORKING_DIRECTORY
mv: from in-cone to out-of-cone
mv: remove BOTH from enum update_mode
mv: check if <destination> is a SKIP_WORKTREE_DIR
mv: free the with_slash in check_dir_in_index()
mv: rename check_dir_in_index() to empty_dir_has_sparse_contents()
t7002: add tests for moving from in-cone to out-of-cone
The function calls opendir() but missing the corresponding
closedir() before exit the function.
Add missing closedir() to fix it.
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Refactor usage of the 'd_type' property of 'struct dirent' in 'diagnose.c'
to instead utilize the compatibility macro 'DTYPE()'. On systems where
'd_type' is not present in 'struct dirent', this macro will always return
'DT_UNKNOWN'. In that case, instead fall back on using the 'stat.st_mode' to
determine whether the dirent points to a dir, file, or link.
Additionally, add a test to 't0092-diagnose.sh' to verify that files (e.g.,
loose objects) are counted properly.
Note that the new function 'get_dtype()' is based on 'resolve_dtype()' in
'dir.c' (which itself was refactored from a prior 'get_dtype()' in
ad6f2157f9 (dir: restructure in a way to avoid passing around a struct
dirent, 2020-01-16)), but differs in that it is meant for use on arbitrary
files, such as those inside the '.git' dir. Because of this, it does not
search the index for a matching entry to derive the 'd_type'.
Reported-by: Randall S. Becker <rsbecker@nexbridge.com>
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In f6d25d7878 (api docs: document that BUG() emits a trace2 error event,
2021-04-13), a link to the plain text version of api-trace2 was added in
`technical/api-error-handling.txt`.
All of our other `link:`s point to the html versions. Do the same here.
Signed-off-by: Todd Zullinger <tmz@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some links were broken in the recent move of various technical docs
c0f6dd49f1 (Merge branch 'ab/tech-docs-to-help', 2022-08-14).
Fix them.
Signed-off-by: Todd Zullinger <tmz@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git fetch" over protocol v2 sent an incorrect ref prefix request
to the server and made "git pull" with configured fetch refspec
that does not cover the remote branch to merge with fail, which has
been corrected.
* jk/proto-v2-ref-prefix-fix:
fetch: add branch.*.merge to default ref-prefix extension
fetch: stop checking for NULL transport->remote in do_fetch()
Fix a few "git log --remerge-diff" bugs.
* en/remerge-diff-fixes:
diff: fix filtering of merge commits under --remerge-diff
diff: fix filtering of additional headers under --remerge-diff
diff: have submodule_format logic avoid additional diff headers
The speed of the merged_iter_pqueue_add() can be improved by using a
pointer to the pq_entry struct, which is 96 bytes. Since the pq_entry
param is worked directly on the stack and does not currently have a
pointer to it, the merged_iter_pqueue_add() function is slightly
slower.
References to pq_entry in reftable have typically included pointers,
such as both of the params for pq_less().
Since we are working with pointers in the pq_entry param, as keenly
pointed out, the pq_entry param has also been made into a const since
the contents of the pq_entry param are copied and not manipulated.
Signed-off-by: Elijah Conners <business@elijahpepe.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On Cygwin, when failing to spawn a process using start_command, Git
outputs the same error as on Linux systems, rather than using the
GIT_WINDOWS_NATIVE-specific error output. The WINDOWS test prerequisite
is set in both Cygwin and native Windows environments, which means it's
not appropriate to use to anticipate the error output from
start_command. Instead, use the MINGW test prerequisite, which is only
set for Git in native Windows environments, and not for Cygwin.
Signed-off-by: Adam Dinwoodie <adam@dinwoodie.org>
Helped-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code that manages list-object-filter structure, used in partial
clones, leaked the instances, which has been plugged.
* jk/plug-list-object-filter-leaks:
prepare_repo_settings(): plug leak of config values
list_objects_filter_options: plug leak of filter_spec strings
transport: free filter options in disconnect_git()
transport: deep-copy object-filter struct for fetch-pack
list_objects_filter_copy(): deep-copy sparse_oid_name field
Plugging leaks in submodule--helper.
* ab/submodule-helper-leakfix:
submodule--helper: fix a configure_added_submodule() leak
submodule--helper: free rest of "displaypath" in "struct update_data"
submodule--helper: free some "displaypath" in "struct update_data"
submodule--helper: fix a memory leak in print_status()
submodule--helper: fix a leak in module_add()
submodule--helper: fix obscure leak in module_add()
submodule--helper: fix "reference" leak
submodule--helper: fix a memory leak in get_default_remote_submodule()
submodule--helper: fix a leak with repo_clear()
submodule--helper: fix "sm_path" and other "module_cb_list" leaks
submodule--helper: fix "errmsg_str" memory leak
submodule--helper: add and use *_release() functions
submodule--helper: don't leak {run,capture}_command() cp.dir argument
submodule--helper: "struct pathspec" memory leak in module_update()
submodule--helper: fix most "struct pathspec" memory leaks
submodule--helper: fix trivial get_default_remote_submodule() leak
submodule--helper: fix a leak in "clone_submodule"
Share the text used to explain configuration variables used by "git
<subcmd>" in "git help <subcmd>" with the text from "git help config".
* ab/dedup-config-and-command-docs:
docs: add CONFIGURATION sections that fuzzy map to built-ins
docs: add CONFIGURATION sections that map to a built-in
log docs: de-duplicate configuration sections
difftool docs: de-duplicate configuration sections
notes docs: de-duplicate and combine configuration sections
apply docs: de-duplicate configuration sections
send-email docs: de-duplicate configuration sections
grep docs: de-duplicate configuration sections
docs: add and use include template for config/* includes
Undoes 'jk/unused-annotation' topic and redoes it to work around
Coccinelle rules misfiring false positives in unrelated codepaths.
* ab/unused-annotation:
git-compat-util.h: use "deprecated" for UNUSED variables
git-compat-util.h: use "UNUSED", not "UNUSED(var)"
Annotate function parameters that are not used (but cannot be
removed for structural reasons), to prepare us to later compile
with -Wunused warning turned on.
* jk/unused-annotation:
is_path_owned_by_current_uid(): mark "report" parameter as unused
run-command: mark unused async callback parameters
mark unused read_tree_recursive() callback parameters
hashmap: mark unused callback parameters
config: mark unused callback parameters
streaming: mark unused virtual method parameters
transport: mark bundle transport_options as unused
refs: mark unused virtual method parameters
refs: mark unused reflog callback parameters
refs: mark unused each_ref_fn parameters
git-compat-util: add UNUSED macro
cee6cb7300 (built-in add -p: implement the "worktree" patch modes,
2019-12-21) added the worktree patch modes to the built-in add -p.
Its commit message claims to be a port of 2f0896ec3a (restore:
support --patch, 2019-04-25), which did the same for the script
git-add--interactive.perl.
The script mentioned only the worktree in its prompt messages in
worktree mode, while the built-in mentions the worktree and also the
index, even though the command doesn't actually affect the index.
2c8bd8471a (checkout -p: handle new files correctly, 2020-05-27)
added new prompt messages for addition that also mention the index in
worktree mode in the built-in, but not in the script.
Correct these prompts to state that only the worktree will be affected.
Reported-by: David Plumpton <david.plumpton@gmail.com>
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
