"git cat-file" learns "--batch-command" mode, which is a more
flexible interface than the existing "--batch" or "--batch-check"
modes, to allow different kinds of inquiries made.
* jc/cat-file-batch-commands:
cat-file: add --batch-command mode
cat-file: add remove_timestamp helper
cat-file: introduce batch_mode enum to replace print_contents
cat-file: rename cmdmode to transform_mode
Improve failure case behaviour of xdiff library when memory
allocation fails.
* pw/xdiff-alloc-fail:
xdiff: handle allocation failure when merging
xdiff: refactor a function
xdiff: handle allocation failure in patience diff
xdiff: fix a memory leak
In sparse-checkouts, files mis-marked as missing from the working tree
could lead to later problems. Such files were hard to discover, and
harder to correct. Automatically detecting and correcting the marking
of such files has been added to avoid these problems.
* en/present-despite-skipped:
repo_read_index: add config to expect files outside sparse patterns
Accelerate clear_skip_worktree_from_present_files() by caching
Update documentation related to sparsity and the skip-worktree bit
repo_read_index: clear SKIP_WORKTREE bit from files present in worktree
unpack-trees: fix accidental loss of user changes
t1011: add testcase demonstrating accidental loss of user modifications
Many output modes of "ls-files" do not work with its
"--recurse-submodules" option, but the "-s" mode has been taught to
work with it.
* jt/ls-files-stage-recurse:
ls-files: support --recurse-submodules --stage
"git checkout -b branch/with/multi/level/name && git stash" only
recorded the last level component of the branch name, which has
been corrected.
* gc/stash-on-branch-with-multi-level-name:
stash: strip "refs/heads/" with skip_prefix
The error message given by "git switch HEAD~4" has been clarified
to suggest the "--detach" option that is required.
* ah/advice-switch-requires-detach-to-detach:
switch: mention the --detach option when dying due to lack of a branch
Use designated initializers we started using in mid 2017 in more
parts of the codebase that are relatively quiescent.
* ab/c99-designated-initializers:
fast-import.c: use designated initializers for "partial" struct assignments
refspec.c: use designated initializers for "struct refspec_item"
convert.c: use designated initializers for "struct stream_filter*"
userdiff.c: use designated initializers for "struct userdiff_driver"
archive-*.c: use designated initializers for "struct archiver"
object-file: use designated initializers for "struct git_hash_algo"
trace2: use designated initializers for "struct tr2_dst"
trace2: use designated initializers for "struct tr2_tgt"
imap-send.c: use designated initializers for "struct imap_server_conf"
When "index-pack" dies due to incoming data exceeding the maximum
allowed input size, include the value of the limit in the error
message.
* mc/index-pack-report-max-size:
index-pack: clarify the breached limit
Tighten the language around "working tree" and "worktree" in the
docs.
* ds/worktree-docs:
worktree: use 'worktree' over 'working tree'
worktree: use 'worktree' over 'working tree'
worktree: use 'worktree' over 'working tree'
worktree: use 'worktree' over 'working tree'
worktree: use 'worktree' over 'working tree'
worktree: use 'worktree' over 'working tree'
worktree: use 'worktree' over 'working tree'
worktree: extract checkout_worktree()
worktree: extract copy_sparse_checkout()
worktree: extract copy_filtered_worktree_config()
worktree: combine two translatable messages
A not-so-common mistake is to write a script to feed "git bisect
run" without making it executable, in which case all tests will
exit with 126 or 127 error codes, even on revisions that are marked
as good. Try to recognize this situation and stop iteration early.
* rs/bisect-executable-not-found:
bisect--helper: double-check run command on exit code 126 and 127
bisect: document run behavior with exit codes 126 and 127
bisect--helper: release strbuf and strvec on run error
bisect--helper: report actual bisect_state() argument on error
Further polishing of "git sparse-checkout".
* en/sparse-checkout-fixes:
sparse-checkout: reject arguments in cone-mode that look like patterns
sparse-checkout: error or warn when given individual files
sparse-checkout: pay attention to prefix for {set, add}
sparse-checkout: correctly set non-cone mode when expected
sparse-checkout: correct reapply's handling of options
Test modernization.
* cg/t3903-modernize:
tests: make the code more readable
tests: allow testing if a path is truly a file or a directory
t/t3903-stash.sh: replace test [-d|-f] with test_path_is_*
Typically with sparse checkouts, we expect files outside the sparsity
patterns to be marked as SKIP_WORKTREE and be missing from the working
tree. Sometimes this expectation would be violated however; including
in cases such as:
* users grabbing files from elsewhere and writing them to the worktree
(perhaps by editing a cached copy in an editor, copying/renaming, or
even untarring)
* various git commands having incomplete or no support for the
SKIP_WORKTREE bit[1,2]
* users attempting to "abort" a sparse-checkout operation with a
not-so-early Ctrl+C (updating $GIT_DIR/info/sparse-checkout and the
working tree is not atomic)[3].
When the SKIP_WORKTREE bit in the index did not reflect the presence of
the file in the working tree, it traditionally caused confusion and was
difficult to detect and recover from. So, in a sparse checkout, since
af6a51875a (repo_read_index: clear SKIP_WORKTREE bit from files present
in worktree, 2022-01-14), Git automatically clears the SKIP_WORKTREE
bit at index read time for entries corresponding to files that are
present in the working tree.
There is another workflow, however, where it is expected that paths
outside the sparsity patterns appear to exist in the working tree and
that they do not lose the SKIP_WORKTREE bit, at least until they get
modified. A Git-aware virtual file system[4] takes advantage of its
position as a file system driver to expose all files in the working
tree, fetch them on demand using partial clone on access, and tell Git
to pay attention to them on demand by updating the sparse checkout
pattern on writes. This means that commands like "git status" only have
to examine files that have potentially been modified, whereas commands
like "ls" are able to show the entire codebase without requiring manual
updates to the sparse checkout pattern.
Thus since af6a51875a, Git with such Git-aware virtual file systems
unsets the SKIP_WORKTREE bit for all files and commands like "git
status" have to fetch and examine them all.
Introduce a configuration setting sparse.expectFilesOutsideOfPatterns to
allow limiting the tracked set of files to a small set once again. A
Git-aware virtual file system or other application that wants to
maintain files outside of the sparse checkout can set this in a
repository to instruct Git not to check for the presence of
SKIP_WORKTREE files. The setting defaults to false, so most users of
sparse checkout will still get the benefit of an automatically updating
index to recover from the variety of difficult issues detailed in
af6a51875a for paths with SKIP_WORKTREE set despite the path being
present.
[1] https://lore.kernel.org/git/xmqqbmb1a7ga.fsf@gitster-ct.c.googlers.com/
[2] The three long paragraphs in the middle of
https://lore.kernel.org/git/CABPp-BH9tju7WVm=QZDOvaMDdZbpNXrVWQdN-jmfN8wC6YVhmw@mail.gmail.com/
[3] https://lore.kernel.org/git/CABPp-BFnFpzwGC11TLoLs8YK5yiisA5D5-fFjXnJsbESVDwZsA@mail.gmail.com/
[4] such as the vfsd described in
https://lore.kernel.org/git/20220207190320.2960362-1-jonathantanmy@google.com/
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add "fast_unwind_on_malloc=0" to LSAN_OPTIONS to get more meaningful
stack traces from LSAN. This isn't required under ASAN which will emit
traces such as this one for a leak in "t/t0006-date.sh":
$ ASAN_OPTIONS=detect_leaks=1 ./t0006-date.sh -vixd
[...]
Direct leak of 3 byte(s) in 1 object(s) allocated from:
#0 0x488b94 in strdup (t/helper/test-tool+0x488b94)
#1 0x9444a4 in xstrdup wrapper.c:29:14
#2 0x5995fa in parse_date_format date.c:991:24
#3 0x4d2056 in show_dates t/helper/test-date.c:39:2
#4 0x4d174a in cmd__date t/helper/test-date.c:116:3
#5 0x4cce89 in cmd_main t/helper/test-tool.c:127:11
#6 0x4cd1e3 in main common-main.c:52:11
#7 0x7fef3c695e49 in __libc_start_main csu/../csu/libc-start.c:314:16
#8 0x422b09 in _start (t/helper/test-tool+0x422b09)
SUMMARY: AddressSanitizer: 3 byte(s) leaked in 1 allocation(s).
Aborted
Whereas LSAN would emit this instead:
$ ./t0006-date.sh -vixd
[...]
Direct leak of 3 byte(s) in 1 object(s) allocated from:
#0 0x4323b8 in malloc (t/helper/test-tool+0x4323b8)
#1 0x7f2be1d614aa in strdup string/strdup.c:42:15
SUMMARY: LeakSanitizer: 3 byte(s) leaked in 1 allocation(s).
Aborted
Now we'll instead git this sensible stack trace under
LSAN. I.e. almost the same one (but starting with "malloc", as is
usual for LSAN) as under ASAN:
Direct leak of 3 byte(s) in 1 object(s) allocated from:
#0 0x4323b8 in malloc (t/helper/test-tool+0x4323b8)
#1 0x7f012af5c4aa in strdup string/strdup.c:42:15
#2 0x5cb164 in xstrdup wrapper.c:29:14
#3 0x495ee9 in parse_date_format date.c:991:24
#4 0x453aac in show_dates t/helper/test-date.c:39:2
#5 0x453782 in cmd__date t/helper/test-date.c:116:3
#6 0x451d95 in cmd_main t/helper/test-tool.c:127:11
#7 0x451f1e in main common-main.c:52:11
#8 0x7f012aef5e49 in __libc_start_main csu/../csu/libc-start.c:314:16
#9 0x42e0a9 in _start (t/helper/test-tool+0x42e0a9)
SUMMARY: LeakSanitizer: 3 byte(s) leaked in 1 allocation(s).
Aborted
As the option name suggests this does make things slower, e.g. for
t0001-init.sh we're around 10% slower:
$ hyperfine -L v 0,1 'LSAN_OPTIONS=fast_unwind_on_malloc={v} make T=t0001-init.sh' -r 3
Benchmark 1: LSAN_OPTIONS=fast_unwind_on_malloc=0 make T=t0001-init.sh
Time (mean ± σ): 2.135 s ± 0.015 s [User: 1.951 s, System: 0.554 s]
Range (min … max): 2.122 s … 2.152 s 3 runs
Benchmark 2: LSAN_OPTIONS=fast_unwind_on_malloc=1 make T=t0001-init.sh
Time (mean ± σ): 1.981 s ± 0.055 s [User: 1.769 s, System: 0.488 s]
Range (min … max): 1.941 s … 2.044 s 3 runs
Summary
'LSAN_OPTIONS=fast_unwind_on_malloc=1 make T=t0001-init.sh' ran
1.08 ± 0.03 times faster than 'LSAN_OPTIONS=fast_unwind_on_malloc=0 make T=t0001-init.sh'
I think that's more than worth it to get the more meaningful stack
traces, we can always provide LSAN_OPTIONS=fast_unwind_on_malloc=0 for
one-off "fast" runs.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the GIT_BUILD_DIR from a path like "/path/to/build/t/.." to
"/path/to/build". The "TEST_DIRECTORY" here is already made an
absolute path a few lines above this.
We could simply do $(cd "$TEST_DIRECTORY"/.." && pwd) here, but as
noted in the preceding commit the "$TEST_DIRECTORY" can't be anything
except the path containing this test-lib.sh file at this point, so we
can more cheaply and equally strip the "/t" off the end.
This change will be helpful to LSAN_OPTIONS which will want to strip
the build directory path from filenames, which we couldn't do if we
had a "/.." in there.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Correct a misleading comment added by me in 62f539043c (test-lib:
Allow overriding of TEST_DIRECTORY, 2010-08-19), and add an assertion
that TEST_DIRECTORY cannot point to any directory except the "t"
directory in the top-level of git.git.
This assertion is in effect not new, since we'd already die if that
wasn't the case[1], but it and the updated commentary help to make
that clearer.
The existing comments were also on the wrong arms of the
"if". I.e. the "allow tests to override this" was on the "test -z"
arm. That came about due to a combination of 62f539043c and
85176d7251 (test-lib.sh: convert $TEST_DIRECTORY to an absolute path,
2013-11-17).
Those earlier comments could be read as allowing the "$TEST_DIRECTORY"
to be some path outside of t/. As explained in the updated comment
that's impossible, rather it was meant for *tests* that ran outside of
t/, i.e. the "t0000-basic.sh" tests that use "lib-subtest.sh".
Those tests have a different working directory, but they set the
"TEST_DIRECTORY" to the same path for bootstrapping. The comments now
reflect that, and further comment on why we have a hard dependency on
this.
1. https://lore.kernel.org/git/220222.86o82z8als.gmgdl@evledraar.gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change our ASAN_OPTIONS and LSAN_OPTIONS to set defaults for those
variables, rather than punting out entirely if we already have them in
the environment.
We want to take any user-provided settings over our own, but we can do
that by prepending our defaults to the variable. The libsanitizer
options parsing has "last option wins" semantics.
It's now possible to do e.g.:
LSAN_OPTIONS=report_objects=1 ./t0006-date.sh
And not have the "report_objects=1" setting overwrite our sensible
default of "abort_on_error=1", but by prepending to the list we ensure
that:
LSAN_OPTIONS=report_objects=1:abort_on_error=0 ./t0006-date.sh
Will take the desired "abort_on_error=0" over our default.
See b0f4c9087e (t: support clang/gcc AddressSanitizer, 2014-12-08)
for the original pattern being altered here, and
85b81b35ff (test-lib: set LSAN_OPTIONS to abort by default,
2017-09-05) for when LSAN_OPTIONS was added in addition to the
then-existing ASAN_OPTIONS.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The script uses "git show -s" to display the title of the merge
commit being studied, without explicitly disabling the pager, which
is not a safe thing to do in a script.
For example, when the pager is set to "less" with "-SF" options (-S
tells the pager not to fold lines but allow horizontal scrolling to
show the overly long lines, -F tells the pager not to wait if the
output in its entirety is shown on a single page), and the title of
the merge commit is longer than the width of the terminal, the pager
will wait until the end-user tells it to quit after showing the
single line.
Explicitly disable the pager with this "git show" invocation to fix
this.
The command uses the "--pretty=format:..." format, which adds LF in
between each pair of commits it outputs, which means that the label
for the merge being learned from will be followed by the next
message on the same line. "--pretty=tformat:..." is what we should
instead, which adds LF after each commit, or a more modern way to
spell it, i.e. "--format=...". This existing breakage becomes
easier to see, now we no longer use the pager.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Users who are accustomed to doing `git checkout <tag>` assume that
`git switch <tag>` will do the same thing. Inform them of the --detach
option so they aren't left wondering why `git switch` doesn't work but
`git checkout` does.
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Messages "ort" merge backend prepares while dealing with conflicted
paths were unnecessarily confusing since it did not differentiate
inner merges and outer merges.
* en/ort-inner-merge-conflict-report:
merge-ort: make informational messages from recursive merges clearer
Workaround we have for versions of PCRE2 before their version 10.36
were in effect only for their versions newer than 10.36 by mistake,
which has been corrected.
* rs/pcre-invalid-utf8-fix-fix:
grep: fix triggering PCRE2_NO_START_OPTIMIZE workaround
Setting core.untrackedCache to true failed to add the untracked
cache extension to the index.
* ds/core-untracked-cache-config:
dir: force untracked cache with core.untrackedCache
Plug (some) memory leaks around parse_date_format().
* ab/date-mode-release:
date API: add and use a date_mode_release()
date API: add basic API docs
date API: provide and use a DATE_MODE_INIT
date API: create a date.h, split from cache.h
cache.h: remove always unused show_date_human() declaration
Some code clean-up in the "git grep" machinery.
* ab/grep-patterntype:
grep: simplify config parsing and option parsing
grep.c: do "if (bool && memchr())" not "if (memchr() && bool)"
grep.h: make "grep_opt.pattern_type_option" use its enum
grep API: call grep_config() after grep_init()
grep.c: don't pass along NULL callback value
built-ins: trust the "prefix" from run_builtin()
grep tests: add missing "grep.patternType" config tests
grep tests: create a helper function for "BRE" or "ERE"
log tests: check if grep_config() is called by "log"-like cmds
grep.h: remove unused "regex_t regexp" from grep_opt
"git clone --filter=... --recurse-submodules" only makes the
top-level a partial clone, while submodules are fully cloned. This
behaviour is changed to pass the same filter down to the submodules.
* js/apply-partial-clone-filters-recursively:
clone, submodule: pass partial clone filters to submodules
Unify more messages to help l10n.
* ja/i18n-common-messages:
i18n: fix some misformated placeholders in command synopsis
i18n: remove from i18n strings that do not hold translatable parts
i18n: factorize "invalid value" messages
i18n: factorize more 'incompatible options' messages
Further tweaks on progress API.
* ab/only-single-progress-at-once:
pack-bitmap-write.c: don't return without stop_progress()
progress API: unify stop_progress{,_msg}(), fix trace2 bug
progress.c: refactor stop_progress{,_msg}() to use helpers
progress.c: use dereferenced "progress" variable, not "(*p_progress)"
progress.h: format and be consistent with progress.c naming
progress.c tests: test some invalid usage
progress.c tests: make start/stop commands on stdin
progress.c test helper: add missing braces
leak tests: fix a memory leak in "test-progress" helper
"git sparse-checkout" wants to work with per-worktree configuration,
but did not work well in a worktree attached to a bare repository.
* ds/sparse-checkout-requires-per-worktree-config:
config: make git_configset_get_string_tmp() private
worktree: copy sparse-checkout patterns and config on add
sparse-checkout: set worktree-config correctly
config: add repo_config_set_worktree_gently()
worktree: create init_worktree_config()
Documentation: add extensions.worktreeConfig details
Error output given in response to an ambiguous object name has been
improved.
* ab/ambiguous-object-name:
object-name: re-use "struct strbuf" in show_ambiguous_object()
object-name: iterate ambiguous objects before showing header
object-name: show date for ambiguous tag objects
object-name: make ambiguous object output translatable
object-name: explicitly handle bad tags in show_ambiguous_object()
object-name: explicitly handle OBJ_BAD in show_ambiguous_object()
object-name tests: add tests for ambiguous object blind spots
Change a few existing non-designated initializer assignments to use
"partial" designated initializer assignments. I.e. we're now omitting
the "NULL" or "0" fields and letting the initializer take care of them
for us.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the "struct refspec_item" at the top of refspec.c to use
designated initializers. Let's keep the "= 0" assignments for
self-documentation purposes, even though they're now redundant.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the "struct stream_filter_vtbl" and "struct stream_filter"
assignments in convert.c to use designated initializers.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the "struct userdiff_driver" assignmentns to use designated
initializers, but let's keep the PATTERNS() and IPATTERN() convenience
macros to avoid churn, but have them defined in terms of designated
initializers.
For the "driver_true" and "driver_false" let's have the compiler
implicitly initialize most of the fields, but let's leave a redundant
".binary = 0" for "driver_true" to make it obvious that it's the
opposite of the the ".binary = 1" for "driver_false".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As with the preceding commit, change another file-level struct
assignment to use designated initializers.
Retain the ".name = NULL" etc. in the case of the first element of
"unknown hash algorithm", to make it explicit that we're intentionally
not setting those, it's not just that we forgot.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert the "static struct tr2_dst" assignments in trace2/* to use
designated initializers. I don't think it improves readability to
include the explicit 0-ing out of the
fd/initialized/need_close/too_many_files members, so let's have those
be initialized implicitly by the compiler.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As with the preceding commit, change another set of file-level struct
assignments to use designated initializers.
As before the "= NULL" assignments are redundant, but we're keeping
them for self-documentation purposes. The comments left to explain the
pre-image can now be removed in favor of working code that relays the
same information to the reader.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Cut down a lot on the verbosity of the "server" assignment in
imap-send.c using designated initializers, only the "ssl_verify"
member was being set to a non-NULL non-0 value.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When generating a message for a stash, "git stash" only records the
part of the branch name to the right of the last "/". e.g. if HEAD is at
"foo/bar/baz", "git stash" generates a message prefixed with "WIP on
baz:" instead of "WIP on foo/bar/baz:".
Fix this by using skip_prefix() to skip "refs/heads/" instead of looking
for the last instance of "/".
Reported-by: Kraymer <kraymer@gmail.com>
Reported-by: Daniel Hahler <git@thequod.de>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As a small courtesy to users, report what limit was breached. This
is especially useful when a push exceeds a server-defined limit, since
the user is unlikely to have configured the limit (their host did).
Also demonstrate the human-readable message in a test.
Helped-by: Taylor Blau <me@ttaylorr.com>
Helped-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Matt Cooper <vtbassmatt@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
