Adjust the test code so that it computes variables for blobs instead of
using hard-coded hashes. This makes t4033 and t4050 (the patience and
histogram tests) pass.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Adjust the test so that it computes variables for blobs instead of using
hard-coded hashes.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Adjust the test so that it computes variables for blobs instead of using
hard-coded hashes.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We typically indent our tests with a single tab, partially so that we
can take advantage of indented heredocs. Make this change and move the
quote marks to be in the typical position for our tests.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Adjust the test so that it computes variables for blobs instead of using
hard-coded hashes.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Adjust the test so that it computes variables for blobs instead of using
hard-coded hashes.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Adjust the test so that it computes values for blobs instead of using
hard-coded hashes.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Adjust the test so that it computes variables for blobs instead of using
hard-coded hashes.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Adjust the test so that it computes variables for blobs and uses the
ZERO_OID variable instead of using hard-coded hashes.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Adjust the test so that it computes variables for blobs instead of using
hard-coded hashes.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Strip out the index lines in the diff before comparing them, as these
will differ between hash algorithms. This leads to a smaller, simpler
change than editing the index line.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Adjust the test so that it uses variables and command substitution for
trees instead of hard-coded hashes. This also has the benefit of making
it more obvious how the test works.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Adjust the test so that it computes variables for blobs instead of using
hard-coded hashes.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These tests rely on creating packs with specially named objects which
are necessarily dependent on the hash used. Skip these tests if we're
not using SHA-1.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This test relies on objects with colliding short names which are
necessarily dependent on the hash used. Skip the test if we're not
using SHA-1.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This test relies on objects with colliding short names which are
necessarily dependent on the hash used. Skip the test if we're not
using SHA-1.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since this is a core test that tests basic functionality, annotate the
assertions that have dependencies on SHA-1 with the appropriate
prerequisite.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since this is a core test that tests basic functionality, annotate the
assertions that have dependencies on SHA-1 with the appropriate
prerequisite.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Switch all uses of $_x40 to $OID_REGEX so that they work correctly with
larger hashes. This commit was created by using the following sed
command to modify all files in the t directory except t/test-lib.sh:
sed -i 's/\$_x40/$OID_REGEX/g'
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently we have a variable, $_x40, which contains a regex that matches
a full 40-character hex constant. However, with NewHash, we'll have
object IDs that are longer than 40 characters. In such a case, $_x40
will be a confusing name. Create a $OID_REGEX variable which will
always reflect a regex matching the appropriate object ID, regardless of
the length of the current hash.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Switch all uses of $_z40 to $ZERO_OID so that they work correctly with
larger hashes. This commit was created by using the following sed
command to modify all files in the t directory except t/test-lib.sh:
sed -i 's/\$_z40/$ZERO_OID/g'
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently we have a variable, $_z40, which contains the all-zero object
ID. However, with NewHash, we'll have an all-zero object ID which is
longer than 40 hex characters. In such a case, $_z40 will be a
confusing name. Create a $ZERO_OID variable which will always reflect
the all-zeros object ID, regardless of the length of the current hash.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are some basic tests in our codebase that test that we get fixed
SHA-1 values. These are valuable because they make sure that our SHA-1
implementation is free of bugs, but obviously these tests will fail with
a different hash.
There are also tests which intentionally produce objects that have
collisions when truncated to a certain length to test our handling of
these cases. These tests, too, will fail with a different hash.
Add an SHA1 prerequisite to annotate both of these types of tests and
disable them when we're using a different hash. In the future, we will
create versions of these tests which handle both SHA-1 and NewHash.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git http-fetch" (deprecated) had an optional and experimental
"feature" to fetch only commits and/or trees, which nobody used.
This has been removed.
* ma/http-walker-no-partial:
walker: drop fields of `struct walker` which are always 1
http-fetch: make `-a` standard behaviour
* js/runtime-prefix:
Avoid multiple PREFIX definitions
git_setup_gettext: plug memory leak
gettext: avoid initialization if the locale dir is not present
Error messages from "git push" can be painted for more visibility.
* js/colored-push-errors:
config: document the settings to colorize push errors/hints
push: test to verify that push errors are colored
push: colorize errors
color: introduce support for colorizing stderr
"git gc --prune=nonsense" spent long time repacking and then
silently failed when underlying "git prune --expire=nonsense"
failed to parse its command line. This has been corrected.
* jc/parseopt-expiry-errors:
parseopt: handle malformed --expire arguments more nicely
gc: do not upcase error message shown with die()
"git fast-export" had a regression in v2.15.0 era where it skipped
some merge commits in certain cases, which has been corrected.
* ma/fast-export-skip-merge-fix:
fast-export: fix regression skipping some merge-commits
The command line completion (in contrib/) has been taught that "git
stash save" has been deprecated ("git stash push" is the preferred
spelling in the new world) and does not offer it as a possible
completion candidate when "git stash push" can be.
* tg/demote-stash-save-in-completion:
completion: make stash -p and alias for stash push -p
completion: stop showing 'save' for stash by default
When fed input that already has In-Reply-To: and/or References:
headers and told to add the same information, "git send-email"
added these headers separately, instead of appending to an existing
one, which is a violation of the RFC. This has been corrected.
* sa/send-email-dedup-some-headers:
send-email: avoid duplicate In-Reply-To/References
"git submodule status" did not check the symbolic revision name it
computed for the submodule HEAD is not the NULL, and threw it at
printf routines, which has been corrected.
* nd/submodule-status-fix:
submodule--helper: don't print null in 'submodule status'
During a "rebase -i" session, the code could give older timestamp
to commits created by later "pick" than an earlier "reword", which
has been corrected.
* js/ident-date-fix:
sequencer: reset the committer date before commits
What is queued here is only the obviously correct and
uncontroversial code clean-up part, which is an earlier 7 patches,
of a larger series.
The remainder that is not queued introduces a few configuration
variables to deal with e-signature backends with different
signature format.
* bt/gpg-interface:
gpg-interface: find the last gpg signature line
gpg-interface: extract gpg line matching helper
gpg-interface: fix const-correctness of "eol" pointer
gpg-interface: use size_t for signature buffer size
gpg-interface: modernize function declarations
gpg-interface: handle bool user.signingkey
t7004: fix mistaken tag name
"git ls-remote" learned an option to allow sorting its output based
on the refnames being shown.
* hn/sort-ls-remote:
ls-remote: create '--sort' option
"git config --get" learned the "--default" option, to help the
calling script. Building on top of the tb/config-type topic, the
"git config" learns "--type=color" type. Taken together, you can
do things like "git config --get foo.color --default blue" and get
the ANSI color sequence for the color given to foo.color variable,
or "blue" if the variable does not exist.
* tb/config-default:
builtin/config: introduce `color` type specifier
config.c: introduce 'git_config_color' to parse ANSI colors
builtin/config: introduce `--default`
The "git config" command uses separate options e.g. "--int",
"--bool", etc. to specify what type the caller wants the value to
be interpreted as. A new "--type=<typename>" option has been
introduced, which would make it cleaner to define new types.
* tb/config-type:
builtin/config.c: support `--type=<type>` as preferred alias for `--<type>`
builtin/config.c: treat type specifiers singularly
The completion script (in contrib/) learned to clear cached list of
command line options upon dot-sourcing it again in a more efficient
way.
* sg/completion-clear-cached:
completion: reduce overhead of clearing cached --options
"git worktree remove" learned that "-f" is a shorthand for
"--force" option, just like for "git worktree add".
* sb/worktree-remove-opt-force:
worktree: accept -f as short for --force for removal
The new "checkout-encoding" attribute can ask Git to convert the
contents to the specified encoding when checking out to the working
tree (and the other way around when checking in).
* ls/checkout-encoding:
convert: add round trip check based on 'core.checkRoundtripEncoding'
convert: add tracing for 'working-tree-encoding' attribute
convert: check for detectable errors in UTF encodings
convert: add 'working-tree-encoding' attribute
utf8: add function to detect a missing UTF-16/32 BOM
utf8: add function to detect prohibited UTF-16/32 BOM
utf8: teach same_encoding() alternative UTF encoding names
strbuf: add a case insensitive starts_with()
strbuf: add xstrdup_toupper()
strbuf: remove unnecessary NUL assignment in xstrdup_tolower()
The scripts in contrib/emacs/ have outlived their usefulness and
have been replaced with a stub that errors out and tells the user
there are replacements.
* ab/nuke-emacs-contrib:
git{,-blame}.el: remove old bitrotting Emacs code
The build procedure "make DEVELOPER=YesPlease" learned to enable a
bit more warning options depending on the compiler used to help
developers more. There also is "make DEVOPTS=tokens" knob
available now, for those who want to help fixing warnings we
usually ignore, for example.
* nd/warn-more-for-devs:
Makefile: add a DEVOPTS to get all of -Wextra
Makefile: add a DEVOPTS to suppress -Werror under DEVELOPER
Makefile: detect compiler and enable more warnings in DEVELOPER=1
connect.c: mark die_initial_contact() NORETURN
The effort to pass the repository in-core structure throughout the
API continues. This round deals with the code that implements the
refs/replace/ mechanism.
* sb/object-store-replace:
replace-object: allow lookup_replace_object to handle arbitrary repositories
replace-object: allow do_lookup_replace_object to handle arbitrary repositories
replace-object: allow prepare_replace_object to handle arbitrary repositories
refs: allow for_each_replace_ref to handle arbitrary repositories
refs: store the main ref store inside the repository struct
replace-object: add repository argument to lookup_replace_object
replace-object: add repository argument to do_lookup_replace_object
replace-object: add repository argument to prepare_replace_object
refs: add repository argument to for_each_replace_ref
refs: add repository argument to get_main_ref_store
replace-object: check_replace_refs is safe in multi repo environment
replace-object: eliminate replace objects prepared flag
object-store: move lookup_replace_object to replace-object.h
replace-object: move replace_map to object store
replace_object: use oidmap
Precompute and store information necessary for ancestry traversal
in a separate file to optimize graph walking.
* ds/commit-graph:
commit-graph: implement "--append" option
commit-graph: build graph from starting commits
commit-graph: read only from specific pack-indexes
commit: integrate commit graph with commit parsing
commit-graph: close under reachability
commit-graph: add core.commitGraph setting
commit-graph: implement git commit-graph read
commit-graph: implement git-commit-graph write
commit-graph: implement write_commit_graph()
commit-graph: create git-commit-graph builtin
graph: add commit graph design document
commit-graph: add format document
csum-file: refactor finalize_hashfile() method
csum-file: rename hashclose() to finalize_hashfile()
