"git fast-import" update.
* en/fast-import-parsing-fix:
fast-import: fix erroneous handling of get-mark with empty orphan commits
fast-import: only allow cat-blob requests where it makes sense
fast-import: check most prominent commands first
git-fast-import.txt: fix wording about where ls command can appear
t9300: demonstrate bug with get-mark and empty orphan commits
"git checkout -m <other>" was about carrying the differences
between HEAD and the working-tree files forward while checking out
another branch, and ignored the differences between HEAD and the
index. The command has been taught to abort when the index and the
HEAD are different.
* nd/checkout-m:
checkout: prevent losing staged changes with --merge
read-tree: add --quiet
unpack-trees: rename "gently" flag to "quiet"
unpack-trees: keep gently check inside add_rejected_path
"git difftool" can now run outside a repository.
* js/difftool-no-index:
difftool: allow running outside Git worktrees with --no-index
parse-options: make OPT_ARGUMENT() more useful
difftool: remove obsolete (and misleading) comment
A new hook "post-index-change" is called when the on-disk index
file changes, which can help e.g. a virtualized working tree
implementation.
* bp/post-index-change-hook:
read-cache: add post-index-change hook
Update our support to format documentation in the CI environment,
either with AsciiDoc ro Asciidoctor.
* sg/asciidoctor-in-ci:
ci: fix AsciiDoc/Asciidoctor stderr check in the documentation build job
ci: stick with Asciidoctor v1.5.8 for now
ci: install Asciidoctor in 'ci/install-dependencies.sh'
Documentation/technical/protocol-v2.txt: fix formatting
Documentation/technical/api-config.txt: fix formatting
Documentation/git-diff-tree.txt: fix formatting
Dev support update.
* js/check-docs-exe:
check-docs: fix for setups where executables have an extension
check-docs: do not expect guide pages to correspond to commands
check-docs: really look at the documented commands again
docs: do not document the `git remote-testgit` command
docs: move gitremote-helpers into section 7
Clean-up markup in the documentation suite.
* cb/doco-mono:
doc: format pathnames and URLs as monospace.
doc/CodingGuidelines: URLs and paths as monospace
"git stash" rewritten in C.
* ps/stash-in-c: (28 commits)
tests: add a special setup where stash.useBuiltin is off
stash: optionally use the scripted version again
stash: add back the original, scripted `git stash`
stash: convert `stash--helper.c` into `stash.c`
stash: replace all `write-tree` child processes with API calls
stash: optimize `get_untracked_files()` and `check_changes()`
stash: convert save to builtin
stash: make push -q quiet
stash: convert push to builtin
stash: convert create to builtin
stash: convert store to builtin
stash: convert show to builtin
stash: convert list to builtin
stash: convert pop to builtin
stash: convert branch to builtin
stash: convert drop and clear to builtin
stash: convert apply to builtin
stash: mention options in `show` synopsis
stash: add tests for `git stash show` config
stash: rename test cases to be more descriptive
...
Dev support update to make it easier to compare two formatted
results from our documentation.
* ma/doc-diff-doc-vs-doctor-comparison:
doc-diff: add `--cut-header-footer`
doc-diff: support diffing from/to AsciiDoc(tor)
doc-diff: let `render_tree()` take an explicit directory name
Doc: auto-detect changed build flags
Documentation mark-up fixes.
* ma/asciidoctor-fixes-more:
Documentation: turn middle-of-line tabs into spaces
git-svn.txt: drop escaping '\' that ends up being rendered
git.txt: remove empty line before list continuation
config/fsck.txt: avoid starting line with dash
config/diff.txt: drop spurious backtick
Build fix around use of asciidoctor instead of asciidoc
* ma/asciidoctor-fixes:
asciidoctor-extensions: fix spurious space after linkgit
Documentation/Makefile: add missing dependency on asciidoctor-extensions
Documentation/Makefile: add missing xsl dependencies for manpages
"git rebase --rebase-merges" replaces its old "--preserve-merges"
option; the latter is now marked as deprecated.
* js/rebase-deprecate-preserve-merges:
rebase: deprecate --preserve-merges
The description of --reset stays true to the first implementation in
438195cced (git-read-tree: add "--reset" flag, 2005-06-09). That is,
--reset discards unmerged entries. Or at least true to the commit
message because I can't be sure about read-tree's behavior regarding
local changes.
But in fcc387db9b (read-tree -m -u: do not overwrite or remove untracked
working tree files., 2006-05-17), it is clear that "-m -u" tries to keep
local changes, while --reset is singled out and will keep overwriting
worktree files. It's not stated in the commit message, but it's obvious
from the patch.
I went this far back not because I had a lot of free time, but because I
did not trust my reading of unpack-trees.c code. So far I think the
related changes in history agree with my understanding of the current
code, that "--reset" loses local changes.
This behavior is not mentioned in git-read-tree.txt, even though
old-timers probably can just guess it based on the "reset" name. Update
git-read-tree.txt about this.
Side note. There's another change regarding --reset that is not
obviously about local changes, b018ff6085 (unpack-trees: fix "read-tree
-u --reset A B" with conflicted index, 2012-12-29). But I'm pretty sure
this is about the first function of --reset, to discard unmerged entries
correctly.
PS. The patch changes one more line than necessary because the first
line uses spaces instead of tab.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Asciidoc uses either one-line or two-line syntax for document/section
titles[1]. The two-line form is used in git-status. Fix a few section
titles in the porcelain v2 section which were inadvertently using
markdown syntax.
[1] http://asciidoc.org/userguide.html#X17
Signed-off-by: Todd Zullinger <tmz@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Using "+" to continue multiple list items is more tedious and
error-prone than wrapping the entire block with "--" block markers.
When using asciidoctor, the list items after the --date=iso list items
are incorrectly formatted when using "+" continuation. Use "--" block
markers to correctly format the block.
When using asciidoc there is no change in how the content is rendered.
Signed-off-by: Todd Zullinger <tmz@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This description line is shown in 'git help -a' and all other commands
description starts with an uppercase character. This just makes that
printout a bit nicer.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Asciidoctor versions v1.5.7 or later print the following warning while
building the documentation:
ASCIIDOC technical/protocol-v2.html
asciidoctor: WARNING: protocol-v2.txt: line 38: unterminated listing block
This highlights an issue (even with older Asciidoctor versions) where
the 'Initial Client Request' header is not rendered as a header but in
monospace. I'm not sure what exactly causes this issue and why it's
an issue only with this particular header, but all headers in
'protocol-v2.txt' are written like this:
Initial Client Request
------------------------
i.e. the header itself is indented by a space, and the "underline" is
two characters longer than the header.
Dropping that indentation and making the length of the underline match
the length of the header apparently fixes this issue.
While at it, adjust all other headers 'protocol-v2.txt' as well, to
match the style we use everywhere else.
The page rendered with AsciiDoc doesn't have this formatting issue.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Asciidoctor versions v1.5.7 or later print the following warning while
building the documentation:
ASCIIDOC technical/api-config.html
asciidoctor: WARNING: api-config.txt: line 232: unterminated listing block
This highlight an issue (even with older Asciidoctor versions) where
the length of the '----' lines surrounding a code example don't match,
and the rest of the document is rendered in monospace.
Fix this by making sure that the length of those lines match.
The page rendered with AsciiDoc doesn't have this formatting issue.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Asciidoctor versions v1.5.7 or later print the following warning while
building the documentation:
ASCIIDOC git-diff-tree.xml
asciidoctor: WARNING: diff-format.txt: line 2: unterminated listing block
This highlights an issue (even with older Asciidoctor versions) where
the "Raw output format" header is not rendered as a header, and the
rest of the document is rendered in monospace. This is not caused by
'diff-format.txt' in itself, but rather by 'git-diff-tree.txt'
including 'pretty-formats.txt' and 'diff-format.txt' on subsequent
lines, while the former happens to end with monospace-formatted
example commands.
Fix this by inserting an empty line between the two include::
directives.
The page rendered with AsciiDoc doesn't have this formatting issue.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 7ded055401 (build: do not install git-remote-testgit, 2013-06-07),
we do not install it. Therefore it makes no sense to document it,
either.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is currently in section 1, but that section is intended for
"Executable programs or shell commands".
A more appropriate place is section 7: "Miscellaneous (including macro
packages and conventions), e.g. man(7), groff(7)".
This issue should have been detected earlier by `make check-docs`, but
was missed due to a bug in that Makefile target (that we are about to
fix).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When get-mark was introduced in commit 28c7b1f7b7 ("fast-import: add a
get-mark command", 2015-07-01), it followed the precedent of the
cat-blob command to be allowed on any line other than in the middle of a
data directive; see commit 777f80d742 ("fast-import: Allow cat-blob
requests at arbitrary points in stream", 2010-11-28). It was useful to
allow cat-blob directives in the middle of a commit to get more data
that would be used in writing the current commit object. get-mark is
not similarly useful since fast-import can already use either object id
or mark. Further, trying to allow this command anywhere caused parsing
bugs. Fix the parsing problems by only allowing get-mark commands to
appear when other commands have completed.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In commit 777f80d742 ("fast-import: Allow cat-blob requests at
arbitrary points in stream", 2010-11-28), fast-import started allowing
cat-blob commands to appear on the start of any line except in the
middle of a "data" command. It could be in the middle of various
directives that were part of a tag command, or in the middle of
checkpoints or progresses (each of which allow an optional second empty
newline), or even immediately after the mark command of a blob before
the data directive appeared (raising the question of what if it used the
mark for the blob that just barely appeared in the stream that we do not
yet have the data for). None of these locations make any sense as
places to put cat-blob requests.
The purpose of this change as stated in that commit message was to
[save] frontends from having to loop over everything they want to
commit in the next commit and cat-ing the necessary objects in
advance.
However, that can be achieved by simply allowing cat-blob requests to
appear whenever a filemodify directive is allowed. Further, it avoids
setting a bad precedent for other commands to follow (e.g. get-mark); a
precedent which caused parsing problems in corner cases.
Technically, inline filemodify directives add a slight wrinkle in that
frontends might want to have cat-blob directives appear after the start
of the filemodify and before the data directive contained within it. I
think it would have been better to disallow such a case (it would be
trivial to use cat-blob before the filemodify instead), but since there
is evidence this was used, for backwards compatibility let's support
that case too.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The docs claimed `ls` commands could appear almost anywhere, but the
code told a different story. Modify the docs to match the code.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
read-tree is basically the front end of unpack-trees code and shoud
expose all of its functionality (unless it's designed for internal
use). This "opts.quiet" (formerly "opts.gently") was added for
builtin/checkout.c but there is no reason why other read-tree users
won't find this useful.
The test that is updated to run 'read-tree --quiet' was added because
unpack-trees was accidentally not being quiet [1] in 6a143aa2b2
(checkout -m: attempt merge when deletion of path was staged -
2014-08-12). Because checkout is the only "opts.quiet" user, there was
no other way to test quiet behavior. But we can now test it directly.
6a143aa2b2 was manually reverted to verify that read-tree --quiet
works correctly (i.e. test_must_be_empty fails).
[1] the commit message there say "errors out instead of performing a
merge" but I'm pretty sure the "performing a merge" happens anyway
even before that commit. That line should say "errors out
_in addition to_ performing a merge"
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If you have staged changes in path A and perform 'checkout
--merge' (which could result in conflicts in a totally unrelated path
B), changes in A will be gone. Which is unexpected. We are supposed
to keep all changes, or kick and scream otherwise.
This is the result of how --merge is implemented, from the very first
day in 1be0659efc (checkout: merge local modifications while switching
branches., 2006-01-12):
1. a merge is done, unmerged entries are collected
2. a hard switch to a new branch is done, then unmerged entries added
back
There is no trivial fix for this. Going with 3-way merge one file at a
time loses rename detection. Going with 3-way merge by trees requires
teaching the algorithm to pick up staged changes. And even if we detect
staged changes with --merge and abort for safety, an option to continue
--merge is very weird. Such an option would keep worktree changes, but
drop staged changes.
Because the problem has been with us since the introduction of --merge
and everybody has been pretty happy (except Phillip, who found this
problem), I'll just take a note here to acknowledge it and wait for
merge wizards to come in and work their magic. There may be a way
forward [1].
[1] CABPp-BFoL_U=bzON4SEMaQSKU2TKwnOgNqjt5MUaOejTKGUJxw@mail.gmail.com
Reported-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The command line parser of "git commit-tree" has been rewritten to
use the parse-options API.
* br/commit-tree-parseopt:
commit-tree: utilize parse-options api
"git config --type=color ..." is meant to replace "git config --get-color"
but there is a slight difference that wasn't documented, which is
now fixed.
* jk/config-type-color-ends-with-lf:
config: document --type=color output is a complete line
"git fsck --connectivity-only" omits computation necessary to sift
the objects that are not reachable from any of the refs into
unreachable and dangling. This is now enabled when dangling
objects are requested (which is done by default, but can be
overridden with the "--no-dangling" option).
* jk/fsck-doc:
fsck: always compute USED flags for unreachable objects
doc/fsck: clarify --connectivity-only behavior
Remove the rebase.useBuiltin setting, which was added as an escape
hatch to disable the builtin version of rebase first released with Git
2.20.
See [1] for the initial implementation of rebase.useBuiltin, and [2]
and [3] for the documentation and corresponding
GIT_TEST_REBASE_USE_BUILTIN option.
Carrying the legacy version is a maintenance burden as seen in
7e097e27d3 ("legacy-rebase: backport -C<n> and --whitespace=<option>
checks", 2018-11-20) and 9aea5e9286 ("rebase: fix regression in
rebase.useBuiltin=false test mode", 2019-02-13). Since the built-in
version has been shown to be stable enough let's remove the legacy
version.
As noted in [3] having use_builtin_rebase() shell out to get its
config doesn't make any sense anymore, that was done for the purposes
of spawning the legacy rebase without having modified any global
state. Let's instead handle this case in rebase_config().
There's still a bunch of references to git-legacy-rebase in po/*.po,
but those will be dealt with in time by the i18n effort.
Even though this configuration variable only existed two releases
let's not entirely delete the entry from the docs, but note its
absence. Individual versions of git tend to be around for a while due
to distro packaging timelines, so e.g. if we're "lucky" a given
version like 2.21 might be installed on say OSX for half a decade.
That'll mean some people probably setting this in config, and then
when they later wonder if it's needed they can Google search the
config option name or check it in git-config. It also allows us to
refer to the docs from the warning for details.
1. 55071ea248 ("rebase: start implementing it as a builtin",
2018-08-07)
2. d8d0a546f0 ("rebase doc: document rebase.useBuiltin", 2018-11-14)
3. 62c23938fa ("tests: add a special setup where rebase.useBuiltin is
off", 2018-11-14)
3. https://public-inbox.org/git/nycvar.QRO.7.76.6.1903141544110.41@tvgsbejvaqbjf.bet/
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
AsciiDoc and Asciidoctor do not agree on what to write in the header and
footer of each man-page, i.e., the very first and the very last line of
*.[157]. Those differences can certainly be interesting in their own
right, but they clutter the output of `./doc-diff --from-asciidoc
--to-asciidoctor HEAD HEAD` quite a bit since the diff contains some
10-15 lines of noise per file diffed.
Teach doc-diff to cut away the first two and last two lines, i.e., the
header/footer and the empty line immediately following/preceding it.
Because Asciidoctor uses an extra empty line compared to AsciiDoc,
remove one more line at each end of the file, but only if it's empty.
An alternative approach might be to pass down `--no-header-footer`,
which both AsciiDoc and Asciidoctor understand, but it has some
drawbacks. First of all, the result doesn't build -- `xmlto` stumbles on
the resulting xml since it has multiple root elements. Second, it cuts
too much -- dropping the header loses the synopsis, which would be
interesting to diff.
Like in the previous commit, encode this option into the directory name
of the "installed" and "rendered" files. Otherwise, we wouldn't be able
to trust that what we use out of that cache actually corresponds to the
options given for this run. (We could optimize this caching a little
since this flag doesn't affect the contents of "installed" at all, but
let's punt on that.)
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Provide `--from-asciidoctor` and `--to-asciidoctor` to select that the
"from" resp. "to" commit should be built with Asciidoctor, and provide
an `--asciidoctor` shortcut for giving both. Similarly, provide
--{from-,to-,}asciidoc for explicitly selecting AsciiDoc.
Implement this using the USE_ASCIIDOCTOR flag. Let's not enforce a
default here, but instead just let the Makefile fall back on whatever is
in config.mak, so that `./doc-diff foo bar` without any of of these new
options behaves exactly like it did before this commit.
Encode the choice into the directory names of our "installed" and
"rendered" files, so that we can run `./doc-diff --from-asciidoc
--to-asciidoctor HEAD HEAD` without our two runs stomping on each other.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
