Rendering by "git log --graph" of ancestry lines leading to a merge
commit were made suboptimal to waste vertical space a bit with a
recent update, which has been corrected.
* ds/graph-horizontal-edges:
graph: fix collapse of multiple edges
graph: add test to demonstrate horizontal line bug
The code recently added in this release to move to the entry beyond
the ones in the same directory in the index in the sparse-cone mode
did not count the number of entries to skip over incorrectly, which
has been corrected.
* ds/sparse-cone:
.mailmap: fix GGG authoship screwup
unpack-trees: correctly compute result count
Tell .editorconfig that in this project, *.txt files are indented
with tabs.
* hi/indent-text-with-tabs-in-editorconfig:
editorconfig: indent text files with tabs
In 49e268e23e (mingw: safeguard better against backslashes in file
names, 2020-01-09), the commit author is listed as
"Johannes Schindelin via GitGitGadget <gitgitgadget@gmail.com>", which
is erroneous. Fix the authorship by mapping the erroneous authorship to
his canonical authorship information.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git restore --staged" did not correctly update the cache-tree
structure, resulting in bogus trees to be written afterwards, which
has been corrected.
* nd/switch-and-restore:
restore: invalidate cache-tree when removing entries with --staged
Reduce unnecessary round-trip when running "ls-remote" over the
stateless RPC mechanism.
* jk/no-flush-upon-disconnecting-slrpc-transport:
transport: don't flush when disconnecting stateless-rpc helper
Complete an update to tutorial that encourages "git switch" over
"git checkout" that was done only half-way.
* hw/tutorial-favor-switch-over-checkout:
doc/gitcore-tutorial: fix prose to match example command
The code that tries to skip over the entries for the paths in a
single directory using the cache-tree was not careful enough
against corrupt index file.
* es/unpack-trees-oob-fix:
unpack-trees: watch for out-of-range index position
has_object_file() said "no" given an object registered to the
system via pretend_object_file(), making it inconsistent with
read_object_file(), causing lazy fetch to attempt fetching an
empty tree from promisor remotes.
* jt/sha1-file-remove-oi-skip-cached:
sha1-file: remove OBJECT_INFO_SKIP_CACHED
"git commit" gives output similar to "git status" when there is
nothing to commit, but without honoring the advise.statusHints
configuration variable, which has been corrected.
* hw/commit-advise-while-rejecting:
commit: honor advice.statusHints when rejecting an empty commit
Sample credential helper for using .netrc has been updated to work
out of the box.
* dl/credential-netrc:
contrib/credential/netrc: work outside a repo
contrib/credential/netrc: make PERL_PATH configurable
With the upgrade, the library names changed from libeay32/ssleay32 to
libcrypto/libssl.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This fix resolves the previously-added test_expect_failure in
t4215-log-skewed-merges.sh.
The issue lies in the "else" condition while updating the mapping
inside graph_output_collapsing_line(). In 0f0f389f (graph: tidy up
display of left-skewed merges, 2019-10-15), the output of left-
skewed merges was changed to allow an immediate horizontal edge in
the first parent, output by graph_output_post_merge_line() instead
of by graph_output_collapsing_line(). This condensed the first line
behavior as follows:
Before 0f0f389f:
| | | | | | *-.
| | | | | | |\ \
| |_|_|_|_|/ | |
|/| | | | | / /
After 0f0f389f:
| | | | | | *
| |_|_|_|_|/|\
|/| | | | |/ /
| | | | |/| /
However, a very subtle issue arose when the second and third parent
edges are collapsed in later steps. The second parent edge is now
immediately adjacent to a vertical edge. This means that the
condition
} else if (graph->mapping[i - 1] < 0) {
in graph_output_collapsing_line() evaluates as false. The block for
this condition was the only place where we connected the target
column with the current position with horizontal edge markers.
In this case, the final "else" block is run, and the edge is marked
as horizontal, but did not back-fill the blank columns between the
target and the current edge. Since the second parent edge is marked
as horizontal, the third parent edge is not marked as horizontal.
This causes the output to continue as follows:
Before this change:
| | | | | | *
| |_|_|_|_|/|\
|/| | | | |/ /
| | | | |/| /
| | | |/| |/
| | |/| |/|
| |/| |/| |
| | |/| | |
By adding the logic for "filling" a horizontal edge between the
target column and the current column, we are able to resolve the
issue.
After this change:
| | | | | | *
| |_|_|_|_|/|\
|/| | | | |/ /
| | |_|_|/| /
| |/| | | |/
| | | |_|/|
| | |/| | |
This output properly matches the expected blend of the edge
behavior before 0f0f389f and the merge commit rendering from
0f0f389f.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A previous test in t4215-log-skewed-merges.sh was added to demonstrate
exactly the topology of a reported failure in "git log --graph". While
investigating the fix, we realized that multiple edges that could
collapse with horizontal lines were not doing so.
Specifically, examine this section of the graph:
| | | | | | *
| |_|_|_|_|/|\
|/| | | | |/ /
| | | | |/| /
| | | |/| |/
| | |/| |/|
| |/| |/| |
| | |/| | |
| | * | | |
Document this behavior with a test. This behavior is new, as the
behavior in v2.24.1 has the following output:
| | | | | | *-.
| | | | | | |\ \
| |_|_|_|_|/ / /
|/| | | | | / /
| | |_|_|_|/ /
| |/| | | | /
| | | |_|_|/
| | |/| | |
| | * | | |
The behavior changed logically in 479db18b ("graph: smooth appearance
of collapsing edges on commit lines", 2019-10-15), but was actually
broken due to an assert() bug in 458152cc ("graph: example of graph
output that can be simplified", 2019-10-15). A future change could
modify this behavior to do the following instead:
| | | | | | *
| |_|_|_|_|/|\
|/| | | | |/ /
| | |_|_|/| /
| |/| | | |/
| | | |_|/|
| | |/| | |
| | * | | |
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, `parse_pathspec_file()` was tested indirectly by invoking
git commands with properly crafted inputs. As demonstrated by the
previous bugfix, testing complicated black boxes indirectly can lead to
tests that silently test the wrong thing.
Introduce direct tests for `parse_pathspec_file()`.
Signed-off-by: Alexandr Miloslavskiy <alexandr.miloslavskiy@syntevo.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While working on the next patch, I also noticed that quotes testing via
`"\"file\\101.t\""` was somewhat incorrect: I escaped `\` one time while
I had to escape it two times! Tests still worked due to `"` being
preserved which in turn prevented pathspec from matching files.
Fix this by using here-doc instead.
Signed-off-by: Alexandr Miloslavskiy <alexandr.miloslavskiy@syntevo.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This reverts commit 5d9324e0f4, reversing
changes made to c58ae96fc4.
The topic turns out to be too buggy for real use.
cf. <f2fe7437-8a48-3315-4d3f-8d51fe4bb8f1@gmail.com>
Further tweak to a "no backslash in indexed paths" for Windows port
we applied earlier.
* js/mingw-loosen-overstrict-tree-entry-checks:
mingw: safeguard better against backslashes in file names
In 224c7d70fa (mingw: only test index entries for backslashes, not tree
entries, 2019-12-31), we relaxed the check for backslashes in tree
entries to check only index entries.
However, the code change was incorrect: it was added to
`add_index_entry_with_check()`, not to `add_index_entry()`, so under
certain circumstances it was possible to side-step the protection.
Besides, the description of that commit purported that all index entries
would be checked when in fact they were only checked when being added to
the index (there are code paths that do not do that, constructing
"transient" index entries).
In any case, it was pointed out in one insightful review at
https://github.com/git-for-windows/git/pull/2437#issuecomment-566771835
that it would be a much better idea to teach `verify_path()` to perform
the check for a backslash. This is safer, even if it comes with two
notable drawbacks:
- `verify_path()` cannot say _what_ is wrong with the path, therefore
the user will no longer be told that there was a backslash in the
path, only that the path was invalid.
- The `git apply` command also calls the `verify_path()` function, and
might have been able to handle Windows-style paths (i.e. with
backslashes instead of forward slashes). This will no longer be
possible unless the user (temporarily) sets `core.protectNTFS=false`.
Note that `git add <windows-path>` will _still_ work because
`normalize_path_copy_len()` will convert the backslashes to forward
slashes before hitting the code path that creates an index entry.
The clear advantage is that `verify_path()`'s purpose is to check the
validity of the file name, therefore we naturally tap into all the code
paths that need safeguarding, also implicitly into future code paths.
The benefits of that approach outweigh the downsides, so let's move the
check from `add_index_entry_with_check()` to `verify_path()`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The clear_ce_flags_dir() method processes the cache entries within
a common directory. The returned int is the number of cache entries
processed by that directory. When using the sparse-checkout feature
in cone mode, we can skip the pattern matching for entries in the
directories that are entirely included or entirely excluded.
eb42feca (unpack-trees: hash less in cone mode, 2019-11-21)
introduced this performance feature. The old mechanism relied on
the counts returned by calling clear_ce_flags_1(), but the new
mechanism calculated the number of rows by subtracting "cache_end"
from "cache" to find the size of the range. However, the equation
is wrong because it divides by sizeof(struct cache_entry *). This
is not how pointer arithmetic works!
A coverity build of Git for Windows in preparation for the 2.25.0
release found this issue with the warning, "Pointer differences,
such as cache_end - cache, are automatically scaled down by the
size (8 bytes) of the pointed-to type (struct cache_entry *).
Most likely, the division by sizeof(struct cache_entry *) is
extraneous and should be eliminated." This warning is correct.
This leaves us with the question "how did this even work?" The
problem that occurs with this incorrect pointer arithmetic is
a performance-only bug, and a very slight one at that. Since
the entry count returned by clear_ce_flags_dir() is reduced by
a factor of 8, the loop in clear_ce_flags_1() will re-process
entries from those directories.
By inserting global counters into unpack-tree.c and tracing
them with trace2_data_intmax() (in a private change, for
testing), I was able to see count how many times the loop inside
clear_ce_flags_1() processed an entry and how many times
clear_ce_flags_dir() was called. Each of these are reduced by at
least a factor of 8 with the current change. A factor larger
than 8 happens when multiple levels of directories are repeated.
Specifically, in the Linux kernel repo, the command
git sparse-checkout set LICENSES
restricts the working directory to only the files at root and
in the LICENSES directory. Here are the measured counts:
clear_ce_flags_1 loop blocks:
Before: 11,520
After: 1,621
clear_ce_flags_dir calls:
Before: 7,048
After: 606
While these are dramatic counts, the time spent in
clear_ce_flags_1() is under one millisecond in each case, so
the improvement is not measurable as an end-to-end time.
Reported-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The english term generation is here not used in the sense of "to
generate" but in the sense of "generations of beings".
This corrects the initial translation from cf4c0c25 (l10n: update German
translation, 2018-12-06).
Fixed-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Ralf Thielow <ralf.thielow@gmail.com>
The whole submoduleAlternateErrorStrategyDie item is interpreted as
being part of the supporting content of the preceding item. This is
because we don't give a double-colon "::" for the separator, but just a
single colon, ":". Let's fix that.
There are a few other matches for [^:]:\s*$ in Documentation/config, but
I didn't spot any similar bugs among them.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since recent updates to the log graph rendering code, drawing
certain merges started triggering an assert on a condition that
would no longer hold true, which has been corrected.
* ds/graph-assert-fix:
graph: fix lack of color in horizontal lines
graph: drop assert() for merge with two collapsing parents
* https://github.com/prati0100/git-gui:
git-gui: allow opening currently selected file in default app
git-gui: allow closing console window with Escape
git gui: fix branch name encoding error
git-gui: revert untracked files by deleting them
git-gui: update status bar to track operations
git-gui: consolidate naming conventions
In some cases, horizontal lines in rendered graphs can lose their
coloring. This is due to a use of graph_line_addch() instead of
graph_line_write_column(). Using a ternary operator to pick the
character is nice for compact code, but we actually need a column to
provide the color.
Add a test to t4215-log-skewed-merges.sh to prevent regression.
Reported-by: Jeff King <peff@peff.net>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "git log --graph" shows a merge commit that has two collapsing
lines, like:
| | | | *
| |_|_|/|
|/| | |/
| | |/|
| |/| |
| * | |
* | | |
we trigger an assert():
graph.c:1228: graph_output_collapsing_line: Assertion
`graph->mapping[i - 3] == target' failed.
The assert was introduced by eaf158f8 ("graph API: Use horizontal
lines for more compact graphs", 2009-04-21), which is quite old.
This assert is trying to say that when we complete a horizontal
line with a single slash, it is because we have reached our target.
It is actually the _second_ collapsing line that hits this assert.
The reason we are in this code path is because we are collapsing
the first line, and in that case we are hitting our target now
that the horizontal line is complete. However, the second line
cannot be a horizontal line, so it will collapse without horizontal
lines. In this case, it is inappropriate to assert that we have
reached our target, as we need to continue for another column
before reaching the target. Dropping the assert is safe here.
The new behavior in 0f0f389f12 (graph: tidy up display of
left-skewed merges, 2019-10-15) caused the behavior change that
made this assertion failure possible. In addition to making the
assert possible, it also changed how multiple edges collapse.
In a larger example, the current code will output a collapse
as follows:
| | | | | | *
| |_|_|_|_|/|\
|/| | | | |/ /
| | | | |/| /
| | | |/| |/
| | |/| |/|
| |/| |/| |
| | |/| | |
| | * | | |
However, the intended collapse should allow multiple horizontal lines
as follows:
| | | | | | *
| |_|_|_|_|/|\
|/| | | | |/ /
| | |_|_|/| /
| |/| | | |/
| | | |_|/|
| | |/| | |
| | * | | |
This behavior is not corrected by this change, but is noted for a later
update.
Helped-by: Jeff King <peff@peff.net>
Reported-by: Bradley Smith <brad@brad-smith.co.uk>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since ba227857d2 (Reduce the number of connects when fetching,
2008-02-04), when we disconnect a git transport, we send a final flush
packet. This cleanly tells the other side that we're done, and avoids
the other side complaining "the remote end hung up unexpectedly" (though
we'd only see that for transports that pass along the server stderr,
like ssh or local-host).
But when we've initiated a v2 stateless-connect session over a transport
helper, there's no point in sending this flush packet. Each operation
we've performed is self-contained, and the other side is fine with us
hanging up between operations.
But much worse, by sending the flush packet we may cause the helper to
issue an entirely new request _just_ to send the flush packet. So we can
incur an extra network request just to say "by the way, we have nothing
more to send".
Let's drop this extra flush packet. As the test shows, this reduces the
number of POSTs required for a v2 ls-remote over http from 2 to 1.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's possible in a case where the index file contains a tree extension
but no blobs within that tree exist for index_pos_by_traverse_info() to
segfault. If the name_entry passed into index_pos_by_traverse_info() has
no blobs inside, AND is alphabetically later than all blobs currently in
the index file, index_pos_by_traverse_info() will segfault. For example,
an index file which looks something like this:
aaa#0
bbb/aaa#0
[Extensions]
TREE: zzz
In this example, 'index_name_pos(..., "zzz/", ...)' will return '-4',
indicating that "zzz/" could be inserted at position 3. However, when
the checks which ensure that the insertion position of "zzz/" look for a
blob at that position beginning with "zzz/", the index cache is accessed
out of range, causing a segfault.
This kind of index state is not typically generated during user
operations, and is in fact an edge case of the state being checked for
in the conditional where it was added. However, since the entry for the
BUG() line is ambiguous, tell some additional context to help Git
developers debug the failure later. When we know the name of the dir we
were trying to look up, it becomes possible to examine the index file
in a hex util to determine what went wrong; the position gives a hint
about where to start looking.
Signed-off-by: Emily Shaffer <emilyshaffer@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "git restore --staged <path>" removes a path that's in the index,
it marks the entry with CE_REMOVE, but we don't do anything to
invalidate the cache-tree. In the non-staged case, we end up in
checkout_worktree(), which calls remove_marked_cache_entries(). That
actually drops the entries from the index, as well as invalidating the
cache-tree and untracked-cache.
But with --staged, we never call checkout_worktree(), and the CE_REMOVE
entries remain. Interestingly, they are dropped when we write out the
index, but that means the resulting index is inconsistent: its
cache-tree will not match the actual entries, and running "git commit"
immediately after will create the wrong tree.
We can solve this by calling remove_marked_cache_entries() ourselves
before writing out the index. Note that we can't just hoist it out of
checkout_worktree(); that function needs to iterate over the CE_REMOVE
entries (to drop their matching worktree files) before removing them.
One curiosity about the test: without this patch, it actually triggers a
BUG() when running git-restore:
BUG: cache-tree.c:810: new1 with flags 0x4420000 should not be in cache-tree
But in the original problem report, which used a similar recipe,
git-restore actually creates the bogus index (and the commit is created
with the wrong tree). I'm not sure why the test here behaves differently
than my out-of-suite reproduction, but what's here should catch either
symptom (and the fix corrects both cases).
Reported-by: Torsten Krah <krah.tm@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
