This changes semantics very subtly, because it adds a new atomicity
guarantee.
In particular, if you "git rm" several files, it will now do all or
nothing. The old shell-script really looped over the removed files one by
one, and would basically randomly fail in the middle if "-f" was used and
one of the files didn't exist in the working directory.
This C builtin one will not re-write the index after each remove, but
instead remove all files at once. However, that means that if "-f" is used
(to also force removal of the file from the working directory), and some
files have already been removed from the workspace, it won't stop in the
middle in some half-way state like the old one did.
So what happens is that if the _first_ file fails to be removed with "-f",
we abort the whole "git rm". But once we've started removing, we don't
leave anything half done. If some of the other files don't exist, we'll
just ignore errors of removal from the working tree.
This is only an issue with "-f", of course.
I think the new behaviour is strictly an improvement, but perhaps more
importantly, it is _different_. As a special case, the semantics are
identical for the single-file case (which is the only one our test-suite
seems to test).
The other question is what to do with leading directories. The old "git
rm" script didn't do anything, which is somewhat inconsistent. This one
will actually clean up directories that have become empty as a result of
removing the last file, but maybe we want to have a flag to decide the
behaviour?
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
With this one, it's now a fatal error to try to add a pathname
that cannot be added with "git add", i.e.
[torvalds@g5 git]$ git add .git/config
fatal: unable to add .git/config to index
and
[torvalds@g5 git]$ git add foo/../bar
fatal: unable to add foo/../bar to index
instead of the old "Ignoring path xyz" warning that would end up
silently succeeding on any other paths.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
"git add Documentation/" when Documentation directory exists
does not barf (as it should not), but "git add ." barfed when it
did not add anything. This was because we checked for the path
prefix ("Documentation/" in the former case, and an empty string
in the latter case) for existence, and lstat("", &st) would say
"Huh?".
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is in the same spirit as what bba319b5 and 45e48120 tried
to do to help users. A command such as "git add Documentaiton"
with misspelled pathspecs would give a friendly reminder with
this.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
First try. Let's see how well this works.
In many ways, the hard parts of "git commit" are not so different from
this, and a builtin commit would share a lot of the code, I think.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This moves the code to add the per-directory ignore files for the base
directory into the library routine.
That not only allows us to turn the function push_exclude_per_directory()
static again, it also simplifies the library interface a lot (the caller
no longer needs to worry about any of the per-directory exclude files at
all).
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This moves the core directory traversal and filename exclusion logic
into the general git library, making it available for other users
directly.
If we ever want to do "git commit" or "git add" as a built-in (and we
do), we want to be able to handle most of git-ls-files as a library.
NOTE! Not all of git-ls-files is libified by this. The index matching
and pathspec prefix calculation is still in ls-files.c, but this is a
big part of it.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This provides a linear decrement on the penalty related to delta depth
instead of being an 1/x function. With this another 5% reduction is
observed on packs for both the GIT repo and the Linux kernel repo, as
well as fixing a pack size regression in another sample repo I have.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* jc/grep: (22 commits)
Fix silly typo in new builtin grep
builtin-grep: unparse more command line options.
builtin-grep: use external grep when we can take advantage of it
builtin-grep: -F (--fixed-strings)
builtin-grep: -w fix
builtin-grep: typofix
builtin-grep: tighten argument parsing.
builtin-grep: documentation
Teach -f <file> option to builtin-grep.
builtin-grep: -L (--files-without-match).
builtin-grep: binary files -a and -I
builtin-grep: terminate correctly at EOF
builtin-grep: tighten path wildcard vs tree traversal.
builtin-grep: support -w (--word-regexp).
builtin-grep: support -c (--count).
builtin-grep: allow more than one patterns.
builtin-grep: allow -<n> and -[ABC]<n> notation for context lines.
builtin-grep: printf %.*s length is int, not ptrdiff_t.
builtin-grep: do not use setup_revisions()
builtin-grep: support '-l' option.
...
The "-F" flag apparently got mis-translated due to some over-eager
copy-paste work into a duplicate "-H" when using the external grep.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* fix:
Fix pack-index issue on 64-bit platforms a bit more portably.
Install git-send-email by default
Fix compilation on newer NetBSD systems
git config syntax updates
Another config file parsing fix.
checkout: use --aggressive when running a 3-way merge (-m).
Apparently <stdint.h> is not enough for uint32_t on OpenBSD; use
"unsigned int" -- hopefully that would stay 32-bit on every
platform we care about, at least until we update the pack-index
file format.
Our sha1 routines optimized for architectures use uint32_t and
expects '#include <stdint.h>' to be enough, so OpenBSD on arm or
ppc might have similar issues down the road, I dunno.
Signed-off-by: Junio C Hamano <junkio@cox.net>
After 567ffeb772 and
4bc87a28be, git-send-email no
longer requires any non-standard Perl modules, so there's no
reason to special-case it.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
NetBSD >=2.0 has iconv() in libc. A libiconv is not required and
does not exist.
See: http://netbsd.gw.com/cgi-bin/man-cgi?iconv+3+NetBSD-2.0
[jc: with a bit of simplification later discussed on the list.]
Signed-off-by: Dennis Stosberg <dennis@stosberg.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Avoid creating a delta index for objects with maximum depth since they
are not going to be used as delta base anyway. This also reduce peak
memory usage slightly as the current object's delta index is not useful
until the next object in the loop is considered for deltification. This
saves a bit more than 1% on CPU usage.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Given that the early eviction of objects with maximum delta depth
may exhibit bad packing on its own, why not considering a bias against
deep base objects in try_delta() to mitigate that bad behavior.
This patch adjust the MAX_size allowed for a delta based on the depth of
the base object as well as enabling the early eviction of max depth
objects from the object window. When used separately, those two things
produce slightly better and much worse results respectively. But their
combined effect is a surprising significant packing improvement.
With this really simple patch the GIT repo gets nearly 15% smaller, and
the Linux kernel repo about 5% smaller, with no significantly measurable
CPU usage difference.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The previous commit makes -u to mean "I do want to remove the
local changes, just update it from the read tree" only for
one-way merge. It makes sense to have it depend on the
"--reset" flag instead.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
I'm not sure why we never actually rejected invalid addresses in
the first place. We just seemed to be using our email validity
checkers to kill duplicates.
Now we just drop invalid email addresses completely and warn
the user about it.
Since we support local sendmail, we'll also accept username-only
addresses.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This should make local mailing possible for machines without
a connection to an SMTP server.
It'll default to using /usr/sbin/sendmail or /usr/lib/sendmail
if no SMTP server is specified (the default). If it can't find
either of those paths, it'll fall back to connecting to an SMTP
server on localhost.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The "-u" flag means "update the working tree files", but to
other types of merges, it also implies "I want to keep my local
changes" -- because they prevent local changes from getting lost
by using verify_uptodate. The one-way merge is different from
other merges in that its purpose is opposite of doing something
else while keeping unrelated local changes. The point of
one-way merge is to nuke local changes. So while it feels
somewhat wrong that this actively loses local changes, it is the
right thing to do.
Signed-off-by: Junio C Hamano <junkio@cox.net>
After 567ffeb772 and
4bc87a28be, git-send-email no
longer requires any non-standard Perl modules, so there's no
reason to special-case it.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
mutt, gnus, pine, mailrc formats should be supported.
Testing and feedback for correctness and completeness of all formats
and support for additional formats would be good.
Nested expansions are also supported.
More than one alias file to be used.
All alias file formats must still of be the same type, though.
Two git repo-config keys are required for this
(as suggested by Ryan Anderson):
sendemail.aliasesfile = <filename of aliases file>
sendemail.aliasfiletype = (mutt|gnus|pine|mailrc)
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Acked-by: Ryan Anderson <ryan@michonline.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
It's not perfect, but it gets the "git grep some-random-string" down to
the good old half-a-second range for the kernel.
It should convert more of the argument flags for "grep", that should be
trivial to expand (I did a few just as an example). It should also bother
to try to return the right "hit" value (which it doesn't, right now - the
code is kind of there, but I didn't actually bother to do it _right_).
Also, right now it _just_ limits by number of arguments, but it should
also strictly speaking limit by total argument size (ie add up the length
of the filenames, and do the "exec_grep()" flush call if it's bigger than
some random value like 32kB).
But I think that it's _conceptually_ doing all the right things, and it
seems to work. So maybe somebody else can do some of the final polish.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
When renaming leading/a/filename to leading/b/filename (and
"filename" is sufficiently long), we tried to squash the rename
to "leading/{a => b}/filename". However, when "/a" or "/b" part
is empty, we underflowed and tried to print a substring of
length -1.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Now that the one-way merge strategy does the right thing wrt files that do
not exist in the result, just remove all the random crud we did in "git
reset" to do this all by hand.
Instead, just pass in "-u" to git-read-tree when we do a hard reset, and
depend on git-read-tree to update the working tree appropriately.
This basically means that git reset turns into
# Always update the HEAD ref
git update-ref HEAD "$rev"
case "--soft"
# do nothing to index/working tree
case "--hard"
# read index _and_ update working tree
git-read-tree --reset -u "$rev"
case "--mixed"
# update just index, report on working tree differences
git-read-tree --reset "$rev"
git-update-index --refresh
which is what it was always semantically doing, it just did it in a
rather strange way because it was written to not expect git-read-tree to
do anything to the working tree.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
For some random reason (probably just because nobody noticed), the one-way
merge strategy didn't mark deleted files as deleted, so if you used
git-read-tree -m -u <newtree>
it would update the files that got changed in the index, but it would not
delete the files that got deleted.
This should fix it, and I can't imagine that anybody depends on the old
strange "update only existing files" behaviour.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Remove the need to pipe git diff through git apply to
get the extended headers summary.
Signed-off-by: Sean Estabrooks <seanlkml@sympatico.ca>
Signed-off-by: Junio C Hamano <junkio@cox.net>
It's better to find out you need to fix your author and
committer information before you enter a long commit message.
Signed-off-by: Sean Estabrooks <seanlkml@sympatico.ca>
Signed-off-by: Junio C Hamano <junkio@cox.net>
