Transports that do not support protocol v2 did not correctly fall
back to protocol v0 under certain conditions, which has been
corrected.
* jk/fix-proto-downgrade-to-v0:
git_connect(): fix corner cases in downgrading v2 to v0
"git rev-parse --quiet foo@{u}", or anything that asks @{u} to be
parsed with GET_OID_QUIETLY option, did not quietly fail, which has
been corrected.
* fc/oid-quietly-parse-upstream:
object-name: fix quiet @{u} parsing
Lift the limitation that colored prompts can only be used with
PROMPT_COMMAND mode.
* fc/completion-colors-do-not-need-prompt-command:
completion: prompt: use generic colors
Fix for a "ls-files --format="%(path)" that produced nonsense
output, which was a bug in 2.38.
* aj/ls-files-format-fix:
ls-files: fix "--format" output of relative paths
"git format-patch" honors the src/dst prefixes set to nonstandard
values with configuration variables like "diff.noprefix", causing
receiving end of the patch that expects the standard -p1 format to
break. Teach "format-patch" to ignore end-user configuration and
always use the standard prefixes.
This is a backward compatibility breaking change.
* jk/format-patch-ignore-noprefix:
rebase: prefer --default-prefix to --{src,dst}-prefix for format-patch
format-patch: add format.noprefix option
format-patch: do not respect diff.noprefix
diff: add --default-prefix option
t4013: add tests for diff prefix options
diff: factor out src/dst prefix setup
"git add -p" while the index is unmerged sometimes failed to parse
the diff output it internally produces and died, which has been
corrected.
* jk/add-p-unmerged-fix:
add-patch: handle "* Unmerged path" lines
The code to parse "git rebase -X<opt>" was not prepared to see an
unparsable option string, which has been corrected.
* ab/fix-strategy-opts-parsing:
sequencer.c: fix overflow & segfault in parse_strategy_opts()
"git format-patch" learned to write a log-message only output file
for empty commits.
* jk/format-patch-change-format-for-empty-commits:
format-patch: output header for empty commits
"git bundle" learned that "-" is a common way to say that the input
comes from the standard input and/or the output goes to the
standard output. It used to work only for output and only from the
root level of the working tree.
* jk/bundle-use-dash-for-stdfiles:
parse-options: use prefix_filename_except_for_dash() helper
parse-options: consistently allocate memory in fix_filename()
bundle: don't blindly apply prefix_filename() to "-"
bundle: document handling of "-" as stdin
bundle: let "-" mean stdin for reading operations
A few subcommands have been taught to stop users from working on a
branch that is being used in another worktree linked to the same
repository.
* rj/avoid-switching-to-already-used-branch:
switch: reject if the branch is already checked out elsewhere (test)
rebase: refuse to switch to a branch already checked out elsewhere (test)
branch: fix die_if_checked_out() when ignore_current_worktree
worktree: introduce is_shared_symref()
Allow "git bisect reset" to check out the original branch when the
branch is already checked out in a different worktree linked to the
same repository.
* rj/bisect-already-used-branch:
bisect: fix "reset" when branch is checked out elsewhere
"git push" has been taught to allow deletion of refs with one-level
names to help repairing a repository who acquired such a ref by
mistake. In general, we don't encourage use of such a ref, and
creation or update to such a ref is rejected as before.
* zh/push-to-delete-onelevel-ref:
push: allow delete single-level ref
receive-pack: fix funny ref error messsage
"git restore" supports options like "--ours" that are only
meaningful during a conflicted merge, but these options are only
meaningful when updating the working tree files. These options are
marked to be incompatible when both "--staged" and "--worktree" are
in effect.
* ak/restore-both-incompatible-with-conflicts:
restore: fault --staged --worktree with merge opts
There's code in git_connect() that checks whether we are doing a push
with protocol_v2, and if so, drops us to protocol_v0 (since we know
how to do v2 only for fetches). But it misses some corner cases:
1. it checks the "prog" variable, which is actually the path to
receive-pack on the remote side. By default this is just
"git-receive-pack", but it could be an arbitrary string (like
"/path/to/git receive-pack", etc). We'd accidentally stay in v2
mode in this case.
2. besides "receive-pack" and "upload-pack", there's one other value
we'd expect: "upload-archive" for handling "git archive --remote".
Like receive-pack, this doesn't understand v2, and should use the
v0 protocol.
In practice, neither of these causes bugs in the real world so far. We
do send a "we understand v2" probe to the server, but since no server
implements v2 for anything but upload-pack, it's simply ignored. But
this would eventually become a problem if we do implement v2 for those
endpoints, as older clients would falsely claim to understand it,
leading to a server response they can't parse.
We can fix (1) by passing in both the program path and the "name" of the
operation. I treat the name as a string here, because that's the pattern
set in transport_connect(), which is one of our callers (we were simply
throwing away the "name" value there before).
We can fix (2) by allowing only known-v2 protocols ("upload-pack"),
rather than blocking unknown ones ("receive-pack" and "upload-archive").
That will mean whoever eventually implements v2 push will have to adjust
this list, but that's reasonable. We'll do the safe, conservative thing
(sticking to v0) by default, and anybody working on v2 will quickly
realize this spot needs to be updated.
The new tests cover the receive-pack and upload-archive cases above, and
re-confirm that we allow v2 with an arbitrary "--upload-pack" path (that
already worked before this patch, of course, but it would be an easy
thing to break if we flipped the allow/block logic without also handling
"name" separately).
Here are a few miscellaneous implementation notes, since I had to do a
little head-scratching to understand who calls what:
- transport_connect() is called only for git-upload-archive. For
non-http git remotes, that resolves to the virtual connect_git()
function (which then calls git_connect(); confused yet?). So
plumbing through "name" in connect_git() covers that.
- for regular fetches and pushes, callers use higher-level functions
like transport_fetch_refs(). For non-http git remotes, that means
calling git_connect() under the hood via connect_setup(). And that
uses the "for_push" flag to decide which name to use.
- likewise, plumbing like fetch-pack and send-pack may call
git_connect() directly; they each know which name to use.
- for remote helpers (including http), we already have separate
parameters for "name" and "exec" (another name for "prog"). In
process_connect_service(), we feed the "name" to the helper via
"connect" or "stateless-connect" directives.
There's also a "servpath" option, which can be used to tell the
helper about the "exec" path. But no helpers we implement support
it! For http it would be useless anyway (no reasonable server
implementation will allow you to send a shell command to run the
server). In theory it would be useful for more obscure helpers like
remote-ext, but even there it is not implemented.
It's tempting to get rid of it simply to reduce confusion, but we
have publicly documented it since it was added in fa8c097cc9
(Support remote helpers implementing smart transports, 2009-12-09),
so it's possible some helper in the wild is using it.
- So for v2, helpers (again, including http) are mainly used via
stateless-connect, driven by the main program. But they do still
need to decide whether to do a v2 probe. And so there's similar
logic in remote-curl.c's discover_refs() that looks for
"git-receive-pack". But it's not buggy in the same way. Since it
doesn't support servpath, it is always dealing with a "service"
string like "git-receive-pack". And since it doesn't support
straight "connect", it can't be used for "upload-archive".
So we could leave that spot alone. But I've updated it here to match
the logic we're changing in connect_git(). That seems like the least
confusing thing for somebody who has to touch both of these spots
later (say, to add v2 push support). I didn't add a new test to make
sure this doesn't break anything; we already have several tests (in
t5551 and elsewhere) that make sure we are using v2 over http.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A new "fetch.hideRefs" option can be used to exclude specified refs
from "rev-list --objects --stdin --not --all" traversal for
checking object connectivity, most useful when there are many
unrelated histories in a single repository.
* ew/fetch-hiderefs:
fetch: support hideRefs to speed up connectivity checks
Allow information carried on the WWW-AUthenticate header to be
passed to the credential helpers.
* mc/credential-helper-www-authenticate:
credential: add WWW-Authenticate header to cred requests
http: read HTTP WWW-Authenticate response headers
t5563: add tests for basic and anoymous HTTP access
Instead of forcing each command to choose to honor GPG related
configuration variables, make the subsystem lazily initialize
itself.
* jc/gpg-lazy-init:
drop pure pass-through config callbacks
gpg-interface: lazily initialize and read the configuration
More work towards -Wunused.
* jk/unused-post-2.39-part2: (21 commits)
help: mark unused parameter in git_unknown_cmd_config()
run_processes_parallel: mark unused callback parameters
userformat_want_item(): mark unused parameter
for_each_commit_graft(): mark unused callback parameter
rewrite_parents(): mark unused callback parameter
fetch-pack: mark unused parameter in callback function
notes: mark unused callback parameters
prio-queue: mark unused parameters in comparison functions
for_each_object: mark unused callback parameters
list-objects: mark unused callback parameters
mark unused parameters in signal handlers
run-command: mark error routine parameters as unused
mark "pointless" data pointers in callbacks
ref-filter: mark unused callback parameters
http-backend: mark unused parameters in virtual functions
http-backend: mark argc/argv unused
object-name: mark unused parameters in disambiguate callbacks
serve: mark unused parameters in virtual functions
serve: use repository pointer to get config
ls-refs: drop config caching
...
Code clean-up to clarify the rule that "git-compat-util.h" must be
the first to be included.
* en/header-cleanup:
diff.h: remove unnecessary include of object.h
Remove unnecessary includes of builtin.h
treewide: replace cache.h with more direct headers, where possible
replace-object.h: move read_replace_refs declaration from cache.h to here
object-store.h: move struct object_info from cache.h
dir.h: refactor to no longer need to include cache.h
object.h: stop depending on cache.h; make cache.h depend on object.h
ident.h: move ident-related declarations out of cache.h
pretty.h: move has_non_ascii() declaration from commit.h
cache.h: remove dependence on hex.h; make other files include it explicitly
hex.h: move some hex-related declarations from cache.h
hash.h: move some oid-related declarations from cache.h
alloc.h: move ALLOC_GROW() functions from cache.h
treewide: remove unnecessary cache.h includes in source files
treewide: remove unnecessary cache.h includes
treewide: remove unnecessary git-compat-util.h includes in headers
treewide: ensure one of the appropriate headers is sourced first
Code clean-up to clarify directory traversal API.
* en/dir-api-cleanup:
unpack-trees: add usage notices around df_conflict_entry
unpack-trees: special case read-tree debugging as internal usage
unpack-trees: rewrap a few overlong lines from previous patch
unpack-trees: mark fields only used internally as internal
unpack_trees: start splitting internal fields from public API
sparse-checkout: avoid using internal API of unpack-trees, take 2
sparse-checkout: avoid using internal API of unpack-trees
unpack-trees: clean up some flow control
dir: mark output only fields of dir_struct as such
dir: add a usage note to exclude_per_dir
dir: separate public from internal portion of dir_struct
unpack-trees: heed requests to overwrite ignored files
t2021: fix platform-specific leftover cruft
"git fsck" learned to check the index files in other worktrees,
just like "git gc" honors them as anchoring points.
* jk/fsck-indices-in-worktrees:
fsck: check even zero-entry index files
fsck: mention file path for index errors
fsck: check index files in all worktrees
fsck: factor out index fsck
When the prompt command mode was introduced in 1bfc51ac81 (Allow
__git_ps1 to be used in PROMPT_COMMAND, 2012-10-10), the assumption was
that it was necessary in order to properly add colors to PS1 in bash,
but this wasn't true.
It's true that the \[ \] markers add the information needed to properly
calculate the width of the prompt, and they have to be added directly to
PS1, a function returning them doesn't work.
But that is because bash coverts the \[ \] markers in PS1 to \001 \002,
which is what readline ultimately needs in order to calculate the width.
We don't need bash to do this conversion, we can use \001 \002
ourselves, and then the prompt command mode is not necessary to display
colors.
This is what functions returning colors are supposed to do [1].
[1] http://mywiki.wooledge.org/BashFAQ/053
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Tested-by: Joakim Petersen <joak-pet@online.no>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently `git rev-parse --quiet @{u}` is not actually quiet when
upstream isn't configured:
fatal: no upstream configured for branch 'foo'
Make it so.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a bug introduced with the "--format" option in
ce74de93 (ls-files: introduce "--format" option, 2022-07-23),
where relative paths were computed using the output buffer,
which could lead to random garbage data in the output.
Signed-off-by: Adam Johnson <me@adamj.eu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the list of files as input was implemented in 6508eedf67
(t/aggregate-results: accomodate systems with small max argument list
length, 2010-06-01), a much simpler solution wasn't considered.
Let's just pass the directory as an argument.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It seems a user would expect this option would work regardless
of whether it's fetching from a single remote, many remotes,
or recursing into submodules.
Signed-off-by: Eric Wong <e@80x24.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we generate a diff with --cached, unmerged entries have no oid for
their index entry:
$ git diff-index --abbrev --cached HEAD
:100644 000000 f719efd 0000000 U my-conflict
So when we are asked to produce a patch, since we only have one side, we
just emit a special message:
$ git diff-index --cached -p HEAD
* Unmerged path my-conflict
This confuses interactive-patch modes that look at cached diffs. For
example:
$ git reset -p
BUG: add-patch.c:498: diff starts with unexpected line:
* Unmerged path my-conflict
Making things even more confusing, you'll get that error only if the
unmerged entry is alphabetically the first changed file. Otherwise, we
simply stick the unrecognized line to the end of the previous hunk.
There it's mostly harmless, as it eventually gets fed back to "git
apply", which happily ignores it. But it's still shown to the user
attached to the hunk, which is wrong.
So let's handle these lines as a noop. There's not really anything
useful to do with a conflicted merge in this case, and that's what we do
for other cases like "add -p". There we get a "diff --cc" line, which we
accept as starting a new file, but we refuse to use any of its hunks
(their headers start with "@@@" and not "@@ ", so we silently ignore
them).
It seems like simply recognizing the line and continuing in our parsing
loop would work. But we actually need to run the rest of the loop body
to handle matching up our colored/filtered output. But that code assumes
that we have some active file_diff we're working on. So instead, we'll
just insert a dummy entry into our array. This ends up the same as if we
saw a "diff --cc" line (a file with no hunks).
Reported-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous commit dropped support for diff.noprefix in format-patch.
While this will do the right thing in most cases (where sending patches
without a prefix was an accidental side effect of the sender preferring
to see their local patches without prefixes), it left no good option for
a project or workflow where you really do want to send patches without
prefixes. You'd be stuck using "--no-prefix" for every invocation.
So let's add a config option specific to format-patch that enables this
behavior. That gives people who have such a workflow a way to get what
they want, but makes it hard to accidentally trigger it.
A more backwards-compatible way of doing the transition would be to have
format.noprefix default to diff.noprefix when it's not set. But that
doesn't really help the "accidental" problem; people would have to
manually set format.noprefix=false. And it's unlikely that anybody
really wants format.noprefix=true in the first place. I'm adding it here
mostly as an escape hatch, not because anybody has expressed any
interest in it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The output of format-patch respects diff.noprefix, but this usually ends
up being a hassle for people receiving the patch, as they have to
manually specify "-p0" in order to apply it.
I don't think there was any specific intention for it to behave this
way. The noprefix option is handled by git_diff_ui_config(), and
format-patch exists in a gray area between plumbing and porcelain.
People do look at the output, and we'd expect it to colorize things,
respect their choice of algorithm, and so on. But this particular option
creates problems for the receiver (in theory so does diff.mnemonicprefix,
but since we are always formatting commits, the mnemonic prefixes will
always be "a/" and "b/").
So let's disable it. The slight downsides are:
- people who have set diff.noprefix presumably like to see their
patches without prefixes. If they use format-patch to review their
series, they'll see prefixes. On the other hand, it is probably a
good idea for them to look at what will actually get sent out.
We could try to play games here with "is stdout a tty", as we do for
color. But that's not a completely reliable signal, and it's
probably not worth the trouble. If you want to see the patch with
the usual bells and whistles, then you are better off using "git
log" or "git show".
- if a project really does have a workflow that likes prefix-less
patches, and the receiver is prepared to use "-p0", then the sender
now has to manually say "--no-prefix" for each format-patch
invocation. That doesn't seem _too_ terrible given that the receiver
has to manually say "-p0" for each git-am invocation.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
You can change the output of prefixes with diff.noprefix and
diff.mnemonicprefix, but there's no easy way to override them from the
command-line. We do have "--no-prefix", but there's no way to get back
to the default prefix. So let's add an option to do that.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We don't have any specific test coverage of diff's various prefix
options. We do incidentally invoke them in a few places, but it's worth
having a more thorough set of tests that covers all of the effects we
expect to see, and that the options kick in at the appropriate times.
This will be especially useful as the next patch adds more options.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The split_cmdline() function introduced in [1] returns an "int". If
it's negative it signifies an error. The option parsing in [2] didn't
account for this, and assigned the value directly to the "size_t
xopts_nr". We'd then attempt to loop over all of these elements, and
access uninitialized memory.
There's a few things that use this for option parsing, but one way to
trigger it is with a bad value to "-X <strategy-option>", e.g:
git rebase -X"bad argument\""
In another context this might be a security issue, but in this case
someone who's already able to inject arguments directly to our
commands would be past other defenses, making this potential
escalation a moot point.
As the example above & test case shows the error reporting leaves
something to be desired. The function will loop over the
whitespace-split values, but when it encounters an error we'll only
report the first element, which is OK, not the second "argument\""
whose quote is unbalanced.
This is an inherent limitation of the current API, and the issue
affects other API users. Let's not attempt to fix that now. If and
when that happens these tests will need to be adjusted to assert the
new output.
1. 2b11e3170e (If you have a config containing something like this:,
2006-06-05)
2. ca6c6b45dd (sequencer (rebase -i): respect strategy/strategy_opts
settings, 2017-01-02)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When handling OPT_FILENAME(), we have to stick the "prefix" (if any) in
front of the filename to make up for the fact that Git has chdir()'d to
the top of the repository. We can do this with prefix_filename(), but
there are a few special cases we handle ourselves.
Unfortunately the memory allocation is inconsistent here; if we do make
it to prefix_filename(), we'll allocate a string which the caller must
free to avoid a leak. But if we hit our special cases, we'll return the
string as-is, and a caller which tries to free it will crash. So there's
no way to win.
Let's consistently allocate, so that callers can do the right thing.
There are now three cases to care about in the function (and hence a
three-armed if/else):
1. we got a NULL input (and should leave it as NULL, though arguably
this is the sign of a bug; let's keep the status quo for now and we
can pick at that scab later)
2. we hit a special case that means we leave the name intact; we
should duplicate the string. This includes our special "-"
matching. Prior to this patch, it also included empty prefixes and
absolute filenames. But we can observe that prefix_filename()
already handles these, so we don't need to detect them.
3. everything else goes to prefix_filename()
I've dropped the "const" from the "char **file" parameter to indicate
that we're allocating, though in practice it's not really important.
This is all being shuffled through a void pointer via opt->value before
it hits code which ever looks at the string. And it's even a bit weird,
because we are really taking _in_ a const string and using the same
out-parameter for a non-const string. A better function signature would
be:
static char *fix_filename(const char *prefix, const char *file);
but that would mean the caller dereferences the double-pointer (and the
NULL check is currently handled inside this function). So I took the
path of least-change here.
Note that we have to fix several callers in this commit, too, or we'll
break the leak-checking tests. These are "new" leaks in the sense that
they are now triggered by the test suite, but these spots have always
been leaky when Git is run in a subdirectory of the repository. I fixed
all of the cases that trigger with GIT_TEST_PASSING_SANITIZE_LEAK. There
may be others in scripts that have other leaks, but we can fix them
later along with those other leaks (and again, you _couldn't_ fix them
before this patch, so this is the necessary first step).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A user can specify a filename to a command from the command line,
either as the value given to a command line option, or a command
line argument. When it is given as a relative filename, in the
user's mind, it is relative to the directory "git" was started from,
but by the time the filename is used, "git" would almost always have
chdir()'ed up to the root level of the working tree.
The given filename, if it is relative, needs to be prefixed with the
path to the current directory, and it typically is done by calling
prefix_filename() helper function. For commands that can also take
"-" to use the standard input or the standard output, however, this
needs to be done with care.
"git bundle create" uses the next word on the command line as the
output filename, and can take "-" to mean "write to the standard
output". It blindly called prefix_filename(), so running it in a
subdirectory did not quite work as expected.
Introduce a new helper, prefix_filename_except_for_dash(), and use
it to help "git bundle create" codepath.
Reported-by: Michael Henry
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For writing, "bundle create -" indicates that the bundle should be
written to stdout. But there's no matching handling of "-" for reading
operations. This is inconsistent, and a little inflexible (though one
can always use "/dev/stdin" on systems that support it).
However, it's easy to change. Once upon a time, the bundle-reading code
required a seekable descriptor, but that was fixed long ago in
e9ee84cf28 (bundle: allowing to read from an unseekable fd,
2011-10-13). So we just need to handle "-" explicitly when opening the
file.
We _could_ do this by handling "-" in read_bundle_header(), which the
reading functions all call already. But that is probably a bad idea.
It's also used by low-level code like the transport functions, and we
may want to be more careful there. We do not know that stdin is even
available to us, and certainly we would not want to get confused by a
configured URL that happens to point to "-".
So instead, let's add a helper to builtin/bundle.c. Since both the
bundle code and some of the callers refer to the bundle by name for
error messages, let's use the string "<stdin>" to make the output a bit
nicer to read.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 79862b6b77 (bundle-create: progress output control, 2019-11-10),
"bundle create" learned about the --all-progress and
--all-progress-implied options, which were copied from pack-objects.
I think these were a mistake.
In pack-objects, "all-progress-implied" is about switching the behavior
between a regular on-disk "git repack" and the use of pack-objects for
push/fetch (where a fetch does not want progress from the server during
the write stage; the client will print progress as it receives the
data). But there's no such distinction for bundles. Prior to
79862b6b77, we always printed the write stage. Afterwards, a vanilla:
git bundle create foo.bundle
omits the write progress, appearing to hang (especially if your
repository is large or your disk is slow). That seems like a regression.
It's possible that the flexibility to disable the write-phase progress
_could_ be useful for bundle. E.g., if you did something like:
ssh some-host git bundle create foo.bundle |
git bundle unbundle
But if you are running both in real-time, why are you using bundles in
the first place? You're better off doing a real fetch.
But even if we did want to support that, it should be the exception, and
vanilla "bundle create" should display the full progress. So we'd want
to name the option "--no-write-progress" or something.
The "--all-progress" option itself is even worse. It exists in
pack-objects only for historical reasons. It's a mistake because it
implies "--progress", and we added "--all-progress-implied" to fix that.
There is no reason to propagate that mistake to new commands.
Likewise, the documentation for these options was pulled from
pack-objects. But it doesn't make any sense in this context. It talks
about "--stdout", but that is not even an option that git-bundle
supports.
This patch flips the default for "--all-progress-implied" back to
"true", fixing the regression in 79862b6b77. This turns that option
into a noop, and means that "--all-progress" is really the same as
"--progress". We _could_ drop them completely, but since they've been
shipped with Git since v2.25.0, it's polite to continue accepting them.
I didn't implement any sort of "--no-write-progress" here. I'm not at
all convinced it's necessary, and the discussion from the original
thread:
https://lore.kernel.org/git/20191110204126.30553-2-robbat2@gentoo.org/
shows that that the main focus was on getting --progress and --quiet
support, and not any kind of clever "real-time bundle over the network"
feature. But technically this patch is making it impossible to do
something that you _could_ do post-79862b6b77c.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When formatting an empty commit, it is surprising that a totally empty
file is generated. Set the flag to always print the header, matching
the behaviour of git-log.
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We discourage the creation/update of single-level refs
because some upper-layer applications only work in specified
reference namespaces, such as "refs/heads/*" or "refs/tags/*",
these single-level refnames may not be recognized. However,
we still hope users can delete them which have been created
by mistake.
Therefore, when updating branches on the server with
"git receive-pack", by checking whether it is a branch deletion
operation, it will determine whether to allow the update of
a single-level refs. This avoids creating/updating such
single-level refs, but allows them to be deleted.
On the client side, "git push" also does not properly fill in
the old-oid of single-level refs, which causes the server-side
"git receive-pack" to think that the ref's old-oid has changed
when deleting single-level refs, this causes the push to be
rejected. So the solution is to fix the client to be able to
delete single-level refs by properly filling old-oid.
Signed-off-by: ZheNing Hu <adlternative@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fixes to code that parses the todo file used in "rebase -i".
* pw/rebase-i-parse-fix:
rebase -i: fix parsing of "fixup -C<commit>"
rebase -i: match whole word in is_command()
Various fix-ups on HTTP tests.
* jk/http-test-fixes:
t5559: make SSL/TLS the default
t5559: fix test failures with LIB_HTTPD_SSL
t/lib-httpd: enable HTTP/2 "h2" protocol, not just h2c
t/lib-httpd: respect $HTTPD_PROTO in expect_askpass()
t5551: drop curl trace lines without headers
t5551: handle v2 protocol in cookie test
t5551: simplify expected cookie file
t5551: handle v2 protocol in upload-pack service test
t5551: handle v2 protocol when checking curl trace
t5551: stop forcing clone to run with v0 protocol
t5551: handle HTTP/2 when checking curl trace
t5551: lower-case headers in expected curl trace
t5551: drop redundant grep for Accept-Language
t5541: simplify and move "no empty path components" test
t5541: stop marking "used receive-pack service" test as v0 only
t5541: run "used receive-pack service" test earlier
Add the value of the WWW-Authenticate response header to credential
requests. Credential helpers that understand and support HTTP
authentication and authorization can use this standard header (RFC 2616
Section 14.47 [1]) to generate valid credentials.
WWW-Authenticate headers can contain information pertaining to the
authority, authentication mechanism, or extra parameters/scopes that are
required.
The current I/O format for credential helpers only allows for unique
names for properties/attributes, so in order to transmit multiple header
values (with a specific order) we introduce a new convention whereby a
C-style array syntax is used in the property name to denote multiple
ordered values for the same property.
In this case we send multiple `wwwauth[]` properties where the order
that the repeated attributes appear in the conversation reflects the
order that the WWW-Authenticate headers appeared in the HTTP response.
Add a set of tests to exercise the HTTP authentication header parsing
and the interop with credential helpers. Credential helpers will receive
WWW-Authenticate information in credential requests.
[1] https://datatracker.ietf.org/doc/html/rfc2616#section-14.47
Signed-off-by: Matthew John Cheetham <mjcheetham@outlook.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a test showing simple anoymous HTTP access to an unprotected
repository, that results in no credential helper invocations.
Also add a test demonstrating simple basic authentication with
simple credential helper support.
Leverage a no-parsed headers (NPH) CGI script so that we can directly
control the HTTP responses to simulate a multitude of good, bad and ugly
remote server implementations around auth.
Signed-off-by: Matthew John Cheetham <mjcheetham@outlook.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The format.attach configuration variable lacked a way to override a
value defined in a lower-priority configuration file (e.g. the
system one) by redefining it in a higher-priority configuration
file. Now, setting format.attach to an empty string means show the
patch inline in the e-mail message, without using MIME attachment.
This is a backward incompatible change.
* jc/countermand-format-attach:
format.attach: allow empty value to disable multi-part messages
