"reset" was previously treated as a standalone special color name
representing `\e[m`. Now, it can apply to other color properties,
allowing exact specifications without implicit attribute inheritance.
For example, "reset green" now renders `\e[;32m`, which is interpreted
as "reset everything; then set foreground to green". This means the
background and other attributes are also reset to their defaults.
Previously, this was impossible to represent in a single color:
"reset" could be specified alone, or a color with attributes, but some
thing like clearing a background color were impossible.
There is a separate change that introduces the "default" color name to
assist with that, but even then, the above could only to be represented
by explicitly disabling each of the attributes:
green default no-bold no-dim no-italic no-ul no-blink no-reverse no-strike
Signed-off-by: Robert Estelle <robertestelle@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The name "default" can now be used in foreground or background colors,
and means to use the terminal's default color, discarding any
explicitly-set color without affecting the other attributes. On many
modern terminals, this is *not* the same as specifying "white" or
"black".
Although attributes could previously be cleared like "no-bold", there
had not been a similar mechanism available for colors, other than a full
"reset", which cannot currently be combined with other settings.
Note that this is *not* the same as the existing name "normal", which is
a no-op placeholder to permit setting the background without changing
the foreground. (i.e. what is currently called "normal" might have been
more descriptively named "inherit", "none", "pass" or similar).
Signed-off-by: Robert Estelle <robertestelle@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The colors black and white where conspicuously missing from the color
constants. Although they are not currently used in the codebase, having
them included makes it easier to visually verify the ANSI codes, and to
distinguish them explicitly from "GIT_COLOR_DEFAULT" in a subsequent
change.
Signed-off-by: Robert Estelle <robertestelle@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Test clean-up.
* ab/test-lib-diff-cleanup:
tests: stop using top-level "README" and "COPYING" files
"lib-diff" tests: make "README" and "COPYING" test data smaller
The codepath to write a new version of .midx multi-pack index files
has learned to release the mmaped memory holding the current
version of .midx before removing them from the disk, as some
platforms do not allow removal of a file that still has mapping.
* tb/fix-midx-rename-while-mapped:
midx.c: guard against commit_lock_file() failures
midx.c: lookup MIDX by object directory during repack
midx.c: lookup MIDX by object directory during expire
midx.c: extract MIDX lookup by object_dir
Improve test framework around unwritable directories.
* ab/test-cleanly-recreate-trash-directory:
test-lib.sh: try to re-chmod & retry on failed trash removal
Bunch of tests are marked as "passing leak check".
* ab/mark-leak-free-tests-more:
merge: add missing strbuf_release()
ls-files: add missing string_list_clear()
ls-files: fix a trivial dir_clear() leak
tests: fix test-oid-array leak, test in SANITIZE=leak
tests: fix a memory leak in test-oidtree.c
tests: fix a memory leak in test-parse-options.c
tests: fix a memory leak in test-prio-queue.c
Bunch of tests are marked as "passing leak check".
* ab/mark-leak-free-tests:
leak tests: mark some misc tests as passing with SANITIZE=leak
leak tests: mark various "generic" tests as passing with SANITIZE=leak
leak tests: mark some read-tree tests as passing with SANITIZE=leak
leak tests: mark some ls-files tests as passing with SANITIZE=leak
leak tests: mark all checkout-index tests as passing with SANITIZE=leak
leak tests: mark all trace2 tests as passing with SANITIZE=leak
leak tests: mark all ls-tree tests as passing with SANITIZE=leak
leak tests: run various "test-tool" tests in t00*.sh SANITIZE=leak
leak tests: run various built-in tests in t00*.sh SANITIZE=leak
Random changes to parse-options implementation.
* ab/parse-options-cleanup:
parse-options: change OPT_{SHORT,UNSET} to an enum
parse-options tests: test optname() output
parse-options.[ch]: make opt{bug,name}() "static"
commit-graph: stop using optname()
parse-options.c: move optname() earlier in the file
parse-options.h: make the "flags" in "struct option" an enum
parse-options.c: use exhaustive "case" arms for "enum parse_opt_result"
parse-options.[ch]: consistently use "enum parse_opt_result"
parse-options.[ch]: consistently use "enum parse_opt_flags"
parse-options.h: move PARSE_OPT_SHELL_EVAL between enums
Userdiff patterns for the C++ language has been updated.
* js/userdiff-cpp:
userdiff-cpp: back out the digit-separators in numbers
userdiff-cpp: learn the C++ spaceship operator
userdiff-cpp: permit the digit-separating single-quote in numbers
userdiff-cpp: prepare test cases with yet unsupported features
userdiff-cpp: tighten word regex
t4034: add tests showing problematic cpp tokenizations
t4034/cpp: actually test that operator tokens are not split
The xxdiff difftool backend can exit with status 128, which the
difftool-helper that launches the backend takes as a significant
failure, when it is not significant at all. Work it around.
* da/mergetools-special-case-xxdiff-exit-128:
mergetools/xxdiff: prevent segfaults from stopping difftool
Fix-up for the other topic already in 'next'.
* fs/ssh-signing-fix:
gpg-interface: fix leak of strbufs in get_ssh_key_fingerprint()
gpg-interface: fix leak of "line" in parse_ssh_output()
ssh signing: clarify trustlevel usage in docs
ssh signing: fmt-merge-msg tests & config parse
Use ssh public crypto for object and push-cert signing.
* fs/ssh-signing:
ssh signing: test that gpg fails for unknown keys
ssh signing: tests for logs, tags & push certs
ssh signing: duplicate t7510 tests for commits
ssh signing: verify signatures using ssh-keygen
ssh signing: provide a textual signing_key_id
ssh signing: retrieve a default key from ssh-agent
ssh signing: add ssh key format and signing code
ssh signing: add test prereqs
ssh signing: preliminary refactoring and clean-up
Recent sparse-index addition, namely any use of index_name_pos(),
can expand sparse index entries and breaks any code that walks
cache-tree or existing index entries. One such instance of such a
breakage has been corrected.
* pw/sparse-cache-tree-verify-fix:
t1092: run "rebase --apply" without "-q" in testing
sparse index: fix use-after-free bug in cache_tree_verify()
"git commit" gave duplicated error message when the object store
was unwritable, which has been corrected.
* ab/fix-commit-error-message-upon-unwritable-object-store:
commit: fix duplication regression in permission error output
unwritable tests: assert exact error output
Avoid performance measurements from getting ruined by gc and other
housekeeping pauses interfering in the middle.
* rs/disable-gc-during-perf-tests:
perf: disable automatic housekeeping
Follow through the work to use the repo interface to access
submodule objects in-process, instead of abusing the alternate
object database interface.
* jt/no-abuse-alternate-odb-for-submodules:
submodule: trace adding submodule ODB as alternate
submodule: pass repo to check_has_commit()
object-file: only register submodule ODB if needed
merge-{ort,recursive}: remove add_submodule_odb()
refs: peeling non-the_repository iterators is BUG
refs: teach arbitrary repo support to iterators
refs: plumb repo into ref stores
Leakfix.
* ab/unpack-trees-leakfix:
sequencer: fix a memory leak in do_reset()
sequencer: add a "goto cleanup" to do_reset()
unpack-trees: don't leak memory in verify_clean_subdirectory()
"git fsck" has been taught to report mismatch between expected and
actual types of an object better.
* ab/fsck-unexpected-type:
fsck: report invalid object type-path combinations
fsck: don't hard die on invalid object types
object-file.c: stop dying in parse_loose_header()
object-file.c: return ULHR_TOO_LONG on "header too long"
object-file.c: use "enum" return type for unpack_loose_header()
object-file.c: simplify unpack_loose_short_header()
object-file.c: make parse_loose_header_extended() public
object-file.c: return -1, not "status" from unpack_loose_header()
object-file.c: don't set "typep" when returning non-zero
cat-file tests: test for current --allow-unknown-type behavior
cat-file tests: add corrupt loose object test
cat-file tests: test for missing/bogus object with -t, -s and -p
cat-file tests: move bogus_* variable declarations earlier
fsck tests: test for garbage appended to a loose object
fsck tests: test current hash/type mismatch behavior
fsck tests: refactor one test to use a sub-repo
fsck tests: add test for fsck-ing an unknown type
The implementation of digit-separating single-quotes introduced a
note-worthy regression: the change of a character literal with a
digit would splice the digit and the closing single-quote. For
example, the change from 'a' to '2' is now tokenized as
'[-a'-]{+2'+} instead of '[-a-]{+2+}'.
The options to fix the regression are:
- Tighten the regular expression such that the single-quote can only
occur between digits (that would match the official syntax).
- Remove support for digit separators.
I chose to remove support, because
- I have not seen a lot of code make use of digit separators.
- If code does use digit separators, then the numbers are typically
long. If a change in one of the segments occurs, it is actually
better visible if only that segment is highlighted as the word
that changed instead of the whole long number.
This choice does introduce another minor regression, though, which
is highlighted in the test case: when a change occurs in the second
or later segment of a hexadecimal number where the segment begins
with a digit, but also has letters, the segment is mistaken as
consisting of a number and an identifier. I can live with that.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The PATH used in CI job may be too wide and let incompatible dlls
to be grabbed, which can cause the build&test to fail. Tighten it.
* js/windows-ci-path-fix:
ci(windows): ensure that we do not pick up random executables
The "--color-lines" and "--color-by-age" options of "git blame"
have been missing, which are now documented.
* bs/doc-blame-color-lines:
blame: document --color-* options
blame: describe default output format
Recent sparse-index work broke safety against attempts to add paths
with trailing slashes to the index, which has been corrected.
* rs/make-verify-path-really-verify-again:
read-cache: let verify_path() reject trailing dir separators again
read-cache: add verify_path_internal()
t3905: show failure to ignore sub-repo
"git cat-file --batch" with the "--batch-all-objects" option is
supposed to iterate over all the objects found in a repository, but
it used to translate these object names using the replace mechanism,
which defeats the point of enumerating all objects in the repository.
This has been corrected.
* jk/cat-file-batch-all-wo-replace:
cat-file: use packed_object_info() for --batch-all-objects
cat-file: split ordered/unordered batch-all-objects callbacks
cat-file: disable refs/replace with --batch-all-objects
cat-file: mention --unordered along with --batch-all-objects
t1006: clean up broken objects
An editor session launched during a Git operation (e.g. during 'git
commit') can leave the terminal in a funny state. The code path
has updated to save the terminal state before, and restore it
after, it spawns an editor.
* cm/save-restore-terminal:
editor: save and reset terminal after calling EDITOR
terminal: teach git how to save/restore its terminal settings
Code clean-up.
* ab/designated-initializers-more:
builtin/remote.c: add and use SHOW_INFO_INIT
builtin/remote.c: add and use a REF_STATES_INIT
urlmatch.[ch]: add and use URLMATCH_CONFIG_INIT
builtin/blame.c: refactor commit_info_init() to COMMIT_INFO_INIT macro
daemon.c: refactor hostinfo_init() to HOSTINFO_INIT macro
"git repack" has been taught to generate multi-pack reachability
bitmaps.
* tb/repack-write-midx:
test-read-midx: fix leak of bitmap_index struct
builtin/repack.c: pass `--refs-snapshot` when writing bitmaps
builtin/repack.c: make largest pack preferred
builtin/repack.c: support writing a MIDX while repacking
builtin/repack.c: extract showing progress to a variable
builtin/repack.c: rename variables that deal with non-kept packs
builtin/repack.c: keep track of existing packs unconditionally
midx: preliminary support for `--refs-snapshot`
builtin/multi-pack-index.c: support `--stdin-packs` mode
midx: expose `write_midx_file_only()` publicly
The "--preserve-merges" option of "git rebase" has been removed.
* js/retire-preserve-merges:
sequencer: restrict scope of a formerly public function
rebase: remove a no-longer-used function
rebase: stop mentioning the -p option in comments
rebase: remove obsolete code comment
rebase: drop the internal `rebase--interactive` command
git-svn: drop support for `--preserve-merges`
rebase: drop support for `--preserve-merges`
pull: remove support for `--rebase=preserve`
tests: stop testing `git rebase --preserve-merges`
remote: warn about unhandled branch.<name>.rebase values
t5520: do not use `pull.rebase=preserve`
The mergesort implementation used to sort linked list has been
optimized.
* rs/mergesort:
test-mergesort: use repeatable random numbers
mergesort: use ranks stack
p0071: test performance of llist_mergesort()
p0071: measure sorting of already sorted and reversed files
test-mergesort: add unriffle_skewed mode
test-mergesort: add unriffle mode
test-mergesort: add generate subcommand
test-mergesort: add test subcommand
test-mergesort: add sort subcommand
test-mergesort: use strbuf_getline()
We read stdout from gpg into a strbuf, then split it into a list of
strbufs, pull out one element, and return it. But we don't free either
the original stdout buffer, nor the list returned from strbuf_split().
This patch fixes both. Note that we have to detach the returned string
from its strbuf before calling strbuf_list_free(), as that would
otherwise throw it away.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We xmemdupz() this buffer, but never free it. Let's do so. We'll use a
cleanup label, since there are multiple exits from the function.
Note that it was also declared a "const char *". We could switch that to
"char *" to indicate that it's allocated, but that make it awkward to
use with skip_prefix(). So instead, we'll introduce an extra non-const
pointer.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We run a few operations and make sure they produce identical results
with and without sparse-index; the version we merged to the "next"
branch used the "-q" option to work around a breakage caused by a
version used at Microsoft with some unreleased changes, but since
we would want to make sure the commands produce identical results,
including reports given to the output that lists which commits were
picked, use of "-q" loses too much interesting information.
Let's drop "-q" from the command invocation and revisit the issue
when the problematic changes are upstreamed.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Helped-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function was added in 4981fe750b (pkt-line: share
buffer/descriptor reading implementation, 2013-02-23), but in
01f9ec64c8 (Use packet_reader instead of packet_read_line,
2018-12-29) the code that was using it was removed.
Since it's being removed we can in turn remove the "src" and "src_len"
arguments to packet_read(), all the remaining users just passed a
NULL/NULL pair to it.
That function is only a thin wrapper for packet_read_with_status()
which still needs those arguments, but for the thin packet_read()
convenience wrapper we can do away with it for now.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function was added in f1f4d8acf4 (pkt-line: add
packet_buf_write_len function, 2018-03-15) for use in
0f1dc53f45 (remote-curl: implement stateless-connect command,
2018-03-15).
In a97d00799a (remote-curl: use post_rpc() for protocol v2 also,
2019-02-21) that only user of it went away, let's remove it.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When writing a MIDX, we atomically move the new MIDX into place via
commit_lock_file(), but do not check to see if that call was successful.
Make sure that we do check in order to prevent us from incorrectly
reporting that we wrote a new MIDX if we actually encountered an error.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Apply similar treatment as in the last commit to the MIDX `repack`
operation.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before a new MIDX can be written, expire_midx_packs() first loads the
existing MIDX, figures out which packs can be expired, and then writes a
new MIDX based on that information.
In order to load the existing MIDX, it uses load_multi_pack_index(),
which mmaps the multi-pack-index file, but does not store the resulting
`struct multi_pack_index *` in the object store.
write_midx_internal() also needs to open the existing MIDX, and it does
so by iterating the results of get_multi_pack_index(), so that it reuses
the same pointer held by the object store. But before it can move the
new MIDX into place, it close_object_store() to munmap() the
multi-pack-index file to accommodate platforms like Windows which don't
allow overwriting files which are memory mapped.
That's where things get weird. Since expire_midx_packs has its own
*separate* memory mapped copy of the MIDX, the MIDX file is still memory
mapped! Interestingly, this doesn't seem to cause a problem in our
tests. (I believe that this has much more to do with my own lack of
familiarity with Windows than it does a lack of coverage in our tests).
In any case, we can side-step the whole issue by teaching
expire_midx_packs() to use the `struct multi_pack_index` pointer it
found via the object store instead of maintain its own copy. That way,
when write_midx_internal() calls `close_object_store()`, we know that
there are no memory mapped copies of the MIDX laying around.
A couple of other small notes about this patch:
- As far as I can tell, passing `local == 1` to the call to
load_multi_pack_index() was an error, since object_dir could be an
alternate. But it doesn't matter, since even though we write
`m->local = 1`, we never read that field back later on.
- Setting `m = NULL` after write_midx_internal() was likely to prevent
a double-free back from when that function took a `struct
multi_pack_index *` that it called close_midx() on itself. We can
rely on write_midx_internal() to call that for us now.
Finally, this enforces the same "the value of --object-dir must be the
local object store, or an alternate" rule from f57a739691 (midx: avoid
opening multiple MIDXs when writing, 2021-09-01) to the `expire`
sub-command, too.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The first thing that write_midx_internal() does is load the MIDX
corresponding to the given object directory, if one is present.
Prepare for other functions in midx.c to do the same thing by extracting
that operation out to a small helper function.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* tb/repack-write-midx:
test-read-midx: fix leak of bitmap_index struct
builtin/repack.c: pass `--refs-snapshot` when writing bitmaps
builtin/repack.c: make largest pack preferred
builtin/repack.c: support writing a MIDX while repacking
builtin/repack.c: extract showing progress to a variable
builtin/repack.c: rename variables that deal with non-kept packs
builtin/repack.c: keep track of existing packs unconditionally
midx: preliminary support for `--refs-snapshot`
builtin/multi-pack-index.c: support `--stdin-packs` mode
midx: expose `write_midx_file_only()` publicly
Speed up the "lint-docs" target by making it non-.PHONY. Similar to my
c234e8a0ec (Makefile: make the "sparse" target non-.PHONY,
2021-09-23). We'll now create empty files corresponding to a
dependency graph for each of these lint scripts.
This speeds things up a bit[1], and makes the output correspond to any
in-tree changes we have:
$ touch git-add.txt; make lint-docs; make lint-docs
GEN cmd-list.made
GEN doc.dep
LINT GITLINK git-add.txt
LINT MAN END git-add.txt
LINT MAN SEC git-add.txt
make: Nothing to be done for 'lint-docs'.
As with the "sparse" target changes this has a hard dependency on the
use of ".DELETE_ON_ERROR" in the Makefile, added here in
db10fc6c09 (doc: simplify Makefile using .DELETE_ON_ERROR,
2021-05-21). This method also depends on the output for us emitting
any errors on STDERR (fixed in a preceding commit), as well us these
scripts exiting with non-zero on any errors (which they were already
doing).
1.
$ git show HEAD~:Documentation/Makefile >Makefile.old
$ hyperfine --warmup 2 -L f ",.old" 'make -j1 -f Makefile{f} lint-docs'
Benchmark #1: make -j1 -f Makefile lint-docs
Time (mean ± σ): 60.8 ms ± 1.4 ms [User: 58.7 ms, System: 2.5 ms]
Range (min … max): 58.9 ms … 64.0 ms 48 runs
Benchmark #2: make -j1 -f Makefile.old lint-docs
Time (mean ± σ): 84.0 ms ± 1.5 ms [User: 78.6 ms, System: 5.7 ms]
Range (min … max): 81.8 ms … 87.8 ms 35 runs
Summary
'make -j1 -f Makefile lint-docs' ran
1.38 ± 0.04 times faster than 'make -j1 -f Makefile.old lint-docs'
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Extend the trick we use to speed up the "clean" target to also extend
to the "lint-docs" target. See 54df87555b (Documentation/Makefile:
conditionally include doc.dep, 2020-12-08) for the "clean"
implementation.
The "doc-lint" target only depends on *.txt files, so we don't need to
generate GIT-VERSION-FILE etc. if that's all we're doing. This makes
the "make lint-docs" target more than 2x as fast:
$ git show HEAD~:Documentation/Makefile >Makefile.old
$ hyperfine -L f ",.old" 'make -f Makefile{f} lint-docs'
Benchmark #1: make -f Makefile lint-docs
Time (mean ± σ): 100.2 ms ± 1.3 ms [User: 93.7 ms, System: 6.7 ms]
Range (min … max): 98.4 ms … 103.1 ms 29 runs
Benchmark #2: make -f Makefile.old lint-docs
Time (mean ± σ): 220.0 ms ± 20.0 ms [User: 206.0 ms, System: 18.0 ms]
Range (min … max): 206.6 ms … 267.5 ms 11 runs
Summary
'make -f Makefile lint-docs' ran
2.19 ± 0.20 times faster than 'make -f Makefile.old lint-docs'
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Have all of the scripts invoked by "make check-docs" emit their output
on STDERR. This does not currently matter due to the way we're
invoking them, but will in a subsequent change. It's a good idea to do
this in any case for consistency with other tools we invoke.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
