According to the comment, enter_repo will modify its input.
However, this has not been the case since 1c64b48
(enter_repo: do not modify input, 2011-10-04). Drop the
now-useless copy.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This code predates prefixcmp, so it used memcmp along with
static sizes. Replacing these memcmps with prefixcmp makes
the code much more readable, and the lack of static sizes
will make refactoring it in future patches simpler.
Note that we used to be unnecessarily liberal in parsing the
"unpack" status line, and would accept "unpack ok\njunk". No
version of git has ever produced that, and it violates the
BNF in Documentation/technical/pack-protocol.txt. Let's take
this opportunity to tighten the check by converting the
prefix comparison into a strcmp.
While we're in the area, let's also fix a vague error
message that does not follow our usual conventions (it
writes directly to stderr and does not use the "error:"
prefix).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we read acks from the remote, we expect either:
ACK <sha1>
or
ACK <sha1> <multi-ack-flag>
We parse the "ACK <sha1>" bit from the line, and then start
looking for the flag strings at "line+45"; if we don't have
them, we assume it's of the first type. But if we do have
the first type, then line+45 is not necessarily inside our
string at all!
It turns out that this works most of the time due to the way
we parse the packets. They should come in with a newline,
and packet_read puts an extra NUL into the buffer, so we end
up with:
ACK <sha1>\n\0
with the newline at offset 44 and the NUL at offset 45. We
then strip the newline, putting a NUL at offset 44. So
when we look at "line+45", we are looking past the end of
our string; but it's OK, because we hit the terminator from
the original string.
This breaks down, however, if the other side does not
terminate their packets with a newline. In that case, our
packet is one character shorter, and we start looking
through uninitialized memory for the flag. No known
implementation sends such a packet, so it has never come up
in practice.
This patch tightens the check by looking for a short,
flagless ACK before trying to parse the flag.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If you set the GIT_DEBUG_SEND_PACK environment variable,
upload-pack will dump lines it receives in the receive_needs
phase to a descriptor. This debugging harness is a strict
subset of what GIT_TRACE_PACKET can do. Let's just drop it
in favor of that.
A few tests used GIT_DEBUG_SEND_PACK to confirm which
objects get sent; we have to adapt them to the new output
format.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the client tells us it has a shallow object via
"shallow <sha1>", we make sure we have the object, mark it
with a flag, then add it to a dynamic array of shallow
objects. This means that a client can get us to allocate
arbitrary amounts of memory just by flooding us with shallow
lines (whether they have the objects or not). You can
demonstrate it easily with:
yes '0035shallow e83c5163316f89bfbde7d9ab23ca2e25604af290' |
git-upload-pack git.git
We already protect against duplicates in want lines by
checking if our flag is already set; let's do the same thing
here. Note that a client can still get us to allocate some
amount of memory by marking every object in the repo as
"shallow" (or "want"). But this at least bounds it with the
number of objects in the repository, which is not under the
control of an upload-pack client.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we receive a line like "shallow <sha1>" from the
client, we feed the <sha1> part to get_sha1. This is a
mistake, as the argument on a shallow line is defined by
Documentation/technical/pack-protocol.txt to contain an
"obj-id". This is never defined in the BNF, but it is clear
from the text and from the other uses that it is meant to be
a hex sha1, not an arbitrary identifier (and that is what
fetch-pack has always sent).
We should be using get_sha1_hex instead, which doesn't allow
the client to request arbitrary junk like "HEAD@{yesterday}".
Because this is just marking shallow objects, the client
couldn't actually do anything interesting (like fetching
objects from unreachable reflog entries), but we should keep
our parsing tight to be on the safe side.
Because get_sha1 is for the most part a superset of
get_sha1_hex, in theory the only behavior change should be
disallowing non-hex object references. However, there is
one interesting exception: get_sha1 will only parse
a 40-character hex sha1 if the string has exactly 40
characters, whereas get_sha1_hex will just eat the first 40
characters, leaving the rest. That means that current
versions of git-upload-pack will not accept a "shallow"
packet that has a trailing newline, even though the protocol
documentation is clear that newlines are allowed (even
encouraged) in non-binary parts of the protocol.
This never mattered in practice, though, because fetch-pack,
contrary to the protocol documentation, does not include a
newline in its shallow lines. JGit follows its lead (though
it correctly is strict on the parsing end about wanting a
hex object id).
We do not adjust fetch-pack to send newlines here, as it
would break communication with older versions of git (and
there is no actual benefit to doing so, except for
consistency with other parts of the protocol).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ob/imap-send-ssl-verify:
imap-send: support subjectAltName as well
imap-send: the subject of SSL certificate must match the host
imap-send: move #ifdef around
Check not only the common name of the certificate subject, but also
check the subject alternative DNS names as well, when verifying that
the certificate matches that of the host we are trying to talk to.
Signed-off-by: Oswald Buddenhagen <ossi@kde.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We did not check a valid certificate's subject at all, and would
have happily talked with a wrong host after connecting to an
incorrect address and getting a valid certificate that does not
belong to the host we intended to talk to.
Signed-off-by: Oswald Buddenhagen <ossi@kde.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Html documents will be installed to root dir (/) no matter what prefix
is set, if run these commands before `make` and `make install-html`:
$ make configure
$ ./configure --prefix=<PREFIX>
After the installation, all the html documents will copy to rootdir (/),
and:
$ git --html-path
<PREFIX>
$ git help -w something
fatal: '<PREFIX>': not a documentation directory.
This is because the variable "htmldir" points to a undefined variable
"$(docdir)" in file "config.mak.autogen", which is generated by running
`./configure`. By default $(docdir) generated by configure is supposed
be set this way:
datarootdir='${prefix}/share'
htmldir='${docdir}'
docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
but since fc1c5415d6 (Honor configure's htmldir switch, 2013-02-02),
we only set and export htmldir without doing so for PACKAGE_TARNAME
(which is set to 'git' by the configure script).
Add the required two variables "PACKAGE_TARNAME" and "docdir" to file
"config.mak.in" will work this issue around.
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Usually we do not pass an empty string to the function hash_name()
because we almost always ask for hash values for a path that is a
candidate to be added to the index. However, check-ignore (and most
likely check-attr, but I didn't check) apparently has a callchain
to ask the hash value for an empty path when it was given a "." from
the top-level directory to ask "Is the path . excluded by default?"
Make sure that hash_name() does not overrun the end of the given
pathname even when it is empty.
Remove a sweep-the-issue-under-the-rug conditional in check-ignore
that avoided to pass an empty string to the callchain while at it.
It is a valid question to ask for check-ignore if the top-level is
set to be ignored by default, even though the answer is most likely
no, if only because there is currently no way to specify such an
entry in the .gitignore file. But it is an unusual thing to ask and
it is not worth optimizing for it by special casing at the top level
of the call chain.
Signed-off-by: Adam Spiers <git@adamspiers.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If you try and update a submodule with a dirty working directory, you
get an error message like:
$ git submodule update
error: Your local changes to the following files would be overwritten by checkout:
...
Please, commit your changes or stash them before you can switch branches.
Aborting
...
Mention this in the submodule notes. The previous phrase was short
enough that I originally thought it might have been referring to the
reflog note (obviously, uncommitted changes will not show up in the
reflog either ;).
Signed-off-by: W. Trevor King <wking@tremily.us>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Less work and more error checking (e.g. does a merge base exist?).
Add an explicit push before request-pull to satisfy request-pull,
which checks to make sure the references are publically available.
Signed-off-by: W. Trevor King <wking@tremily.us>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
I think this interface is often more convenient than extended cherry
picking or using 'git format-patch'. In fact, I removed the
cherry-pick section entirely. The entry-level suggestions for
rerolling are now:
1. git commit --amend
2. git format-patch origin
git reset --hard origin
...edit and reorder patches...
git am *.patch
3. git rebase -i origin
Signed-off-by: W. Trevor King <wking@tremily.us>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
test_expect_success_multi() helper function warrants some explanation,
since at first sight it may seem like generic test framework plumbing,
but is in fact specific to testing check-ignore, and allows more
thorough testing of the various output formats without significantly
increase the size of t0008.
Signed-off-by: Adam Spiers <git@adamspiers.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, git will append two newlines to every message supplied via
the -m switch. The purpose of this is to allow -m to be supplied
multiple times and have each supplied string become a paragraph in the
resulting commit message.
Normally, this does not cause a problem since any trailing newlines will
be removed by the cleanup operation. If cleanup=verbatim for example,
then the trailing newlines will not be removed and will survive into the
resulting commit message.
Instead, let's ensure that the string supplied to -m is newline terminated,
but only append a second newline when appending additional messages.
Fixes the test in t7502.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This test attempts to verify that a commit message supplied to 'git
commit' via the -m switch was used in full as the commit message for a
commit when --cleanup=verbatim was used.
But, this test has been broken since it was introduced. Since the
commit message containing trailing newlines was supplied to 'git commit'
using a command substitution, the trailing newlines were removed by the
shell. This means that a string without any trailing newlines was
actually supplied to 'git commit'.
The test was able to complete successfully since internally, git appends
two newlines to each string supplied via the -m switch. So, the two
newlines removed by the shell were then re-added by git, and the
resulting commit matched what was expected.
So, let's move the initial creation of the commit message string out
from within a previous test so that it stands alone. Assign the desired
commit message to a variable using literal newlines. Then populate the
expect file from the contents of the commit message variable. This way
the shell variable becomes the authoritative source of the commit
message and can be supplied via the -m switch with the trailing newlines
intact.
Mark this test as failing, since it is not handled correctly by git.
As described above, git appends two extra newlines to every string
supplied via -m, even to the ones that already end with a newline.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This test attempts to verify that a commit in "verbatim" mode, when
supplied a commit template, produces a commit in which the commit
message matches exactly the template that was supplied. But, since the
commit operation appends additional instructions for the user as
comments in the commit buffer, which would cause the comparison to fail,
this test decided to compare only the first three lines (the length of
the template) of the resulting commit message to the original template
file.
This has two problems.
1. It does not allow the template to be lengthened or shortened
without also modifying the number of lines that are considered
significant (i.e. the argument to 'head -n').
2. It will not catch a bug in git that causes git to append additional
lines to the commit message.
So, let's use the --no-status option to 'git commit' which will cause
git to refrain from appending the lines of instructional text to the
commit message. This will allow the entire resulting commit message to
be compared against the expected value.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of adding an early return to the inside of the
ssl_socket_connect() function for NO_OPENSSL compilation, split it
into a separate stub function.
No functional change, but the next change to extend ssl_socket_connect()
will become easier to read this way.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We stopped mentioning `tracking` is a deprecated but supported
synonym for `upstream` in pull.default even though we have no
intention of removing the support for it.
* jc/mention-tracking-for-pull-default:
doc: mention tracking for pull.default
Also migration path for the default behaviour of "git add -u/-A" run
in a subdirectory is worth mentioning.
Both pointed out by Matthieu Moy.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Minor clean up of if-then nesting in checks for environment variables
and config options. No functional changes.
Signed-off-by: Martin Erik Werner <martinerikwerner@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
user-manual: use -o latest.tar.gz to create a gzipped tarball
user-manual: use 'git config --global user.*' for setup
user-manual: mention 'git remote add' for remote branch config
user-manual: give 'git push -f' as an alternative to +master
user-manual: use 'remote add' to setup push URLs
This functionality was introduced by 0e804e09 (archive: provide
builtin .tar.gz filter, 2011-07-21) for v1.7.7.
Signed-off-by: W. Trevor King <wking@tremily.us>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A simple command line call is easier than spawning an editor,
especially for folks new to ideas like the "command line" and "text
editors". This is also the approach suggested by 'git commit' if you
try and commit without having configured user.name or user.email.
Signed-off-by: W. Trevor King <wking@tremily.us>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
I hardly ever setup remote.<name>.url using 'git config'. While it
may be instructive to do so, we should also point out 'git remote
add'.
Signed-off-by: W. Trevor King <wking@tremily.us>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This mirrors existing language in the description of 'git fetch'.
Signed-off-by: W. Trevor King <wking@tremily.us>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is no need to use here documents to setup this configuration.
It is easier, less confusing, and more robust to use `git remote add`
directly.
Signed-off-by: W. Trevor King <wking@tremily.us>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow the server side to redact the refs/ namespace it shows to the
client.
Will merge to 'master'.
* jc/hidden-refs:
upload/receive-pack: allow hiding ref hierarchies
upload-pack: simplify request validation
upload-pack: share more code
Add diff.algorithm configuration so that the user does not type
"diff --histogram".
* mp/diff-algo-config:
diff: Introduce --diff-algorithm command line option
config: Introduce diff.algorithm variable
git-completion.bash: Autocomplete --minimal and --histogram for git-diff
Allows skipping the untracked check GIT_PS1_SHOWUNTRACKEDFILES
asks for the git-prompt (in contrib/) per repository.
* mw/bash-prompt-show-untracked-config:
t9903: add extra tests for bash.showDirtyState
t9903: add tests for bash.showUntrackedFiles
shell prompt: add bash.showUntrackedFiles option
"git log --grep=<pattern>" used to look for the pattern in literal
bytes of the commit log message and ignored the log-output encoding.
* jk/read-commit-buffer-data-after-free:
log: re-encode commit messages before grepping
Git::config() returns `undef` when given keys that do not exist.
Check that the $guitool value is defined to prevent a noisy
"Use of uninitialized variable $guitool in length" warning.
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
