I found that some doubled words had snuck back into projects from which
I'd already removed them, so now there's a "syntax-check" makefile rule in
gnulib to help prevent recurrence.
Running the command below spotted a few in git, too:
git ls-files | xargs perl -0777 -n \
-e 'while (/\b(then?|[iao]n|i[fst]|but|f?or|at|and|[dt])\s+\1\b/gims)' \
-e '{$n=($` =~ tr/\n/\n/ + 1); ($v=$&)=~s/\n/\\n/g;' \
-e 'print "$ARGV:$n:$v\n"}'
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Extract converting numerical timezone in the form of '(+|-)HHMM' to
timezoneOffset function, and fix parsing of negative fractional
timezones.
This is used to format timestamps in 'blame_incremental' view; this
complements commit 2b1e172 (gitweb: Fix handling of fractional
timezones in parse_date, 2011-03-25).
Now
gitweb.cgi/git.git/blame_incremental/3fe5489:/contrib/gitview/gitview#l853
and
gitweb.cgi/git.git/blame/3fe5489:/contrib/gitview/gitview#l853
show the same correct time in author's local timezone in title
(on mouseover) [Aneesh Kumar K.V, 2006-02-24 00:59:42 +0530].
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fractional timezones, like -0330 (NST used in Canada) or +0430
(Afghanistan, Iran DST), were not handled properly in parse_date; this
means values such as 'minute_local' and 'iso-tz' were not generated
correctly.
This was caused by two mistakes:
* sign of timezone was applied only to hour part of offset, and not
as it should be also to minutes part (this affected only negative
fractional timezones).
* 'int $h + $m/60' is 'int($h + $m/60)' and not 'int($h) + $m/60',
so fractional part was discarded altogether ($h is hours, $m is
minutes, which is always less than 60).
Note that positive fractional timezones +0430, +0530 and +1030 can be
found as authortime in git.git repository itself.
For example http://repo.or.cz/w/git.git/commit/88d50e7 had authortime
of "Fri, 8 Jan 2010 18:48:07 +0000 (23:48 +0530)", which is not marked
with 'atnight', when "git show 88d50e7" gives correct author date of
"Sat Jan 9 00:18:07 2010 +0530".
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Timezone is required to correctly set local time, which would be needed
for future 'localtime' feature.
While at it, remove unnecessary call to the function from git_log_body,
as its return value is not used anywhere.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When $feature{'pathinfo'} is used, gitweb script sets the base URL to
itself, so that relative links to static files work correctly. It
does it by adding something like below to HTML head:
<base href="http://HOST/gitweb.cgi">
This breaks the "patch" anchor links seen on the commitdiff pages,
because these links, being relative (<a href="#patch1">), are resolved
(computed) relative to the base URL and not relative to current URL,
i.e. as:
http://HOST/gitweb.cgi#patch1
Instead, they should look like this:
35a9811ef9 (patch1)
Add an "-anchor" parameter to href(), and use href(-anchor=>"patch1")
to generate "patch" anchor links, so that the full path is included in
the patch link.
While at it, convert
print "foo";
print "bar";
to
print "foo" .
"bar";
in the neighborhood of changes.
Signed-off-by: Kevin Cernekee <cernekee@gmail.com>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Consider the following code fragment:
/*
* test
*/
vim ":set list" mode shows that the first character on each line is a
tab:
^I/*$
^I * test$
^I */$
By default, the "highlight" program will retain the tabs in the HTML
output:
$ highlight --fragment --syntax c test.c
<span class="hl com">/*</span>
<span class="hl com"> * test</span>
<span class="hl com"> */</span>
vim list mode:
^I<span class="hl com">/*</span>$
<span class="hl com">^I * test</span>$
<span class="hl com">^I */</span>$
In gitweb, this winds up looking something like:
1 /*
2 * test
3 */
I tried both Firefox and Opera and saw the same behavior.
The desired output is:
1 /*
2 * test
3 */
This can be accomplished by specifying "--replace-tabs=8" on the
highlight command line.
Signed-off-by: Kevin Cernekee <cernekee@gmail.com>
Acked-by: John 'Warthog9' Hawley <warthog9@eaglescrag.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change S_ISREG($to_mode_oct) to S_ISREG($from_mode_oct) in the branch
that handles from modes, not to modes. This logic appears to have been
caused by copy/paste programming by Jakub Narebski in e8e41a93. It
would be better to rewrite this code not to be duplicated, but I
haven't done so.
This issue caused a failing test on perl 5.13.9, which has a warning
that turned this up:
gitweb.perl: Use of uninitialized value in subroutine entry at /home/avar/g/git/t/../gitweb/gitweb.perl line 4415.
Which caused the Git test suite to fail on this test:
./t9500-gitweb-standalone-no-errors.sh (Wstat: 256 Tests: 90 Failed: 84)
Failed tests: 1-8, 10-36, 38-45, 47-48, 50-88
Non-zero exit status: 1
Reported-by: perl 5.13.9
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Using the qw(...) construct as implicit parentheses was deprecated in
perl 5.13.5. Change the relevant code in gitweb to not use the
deprecated construct. The offending code was introduced in 3562198b by
Jakub Narebski.
The issue is that perl will now warn about this:
$ perl -wE 'for my $i qw(a b) { say $i }'
Use of qw(...) as parentheses is deprecated at -e line 1.
a
b
This caused gitweb.perl to warn on perl 5.13.5 and above, and these
tests to fail on those perl versions:
./t9501-gitweb-standalone-http-status.sh (Wstat: 256 Tests: 11 Failed: 10)
Failed tests: 2-11
Non-zero exit status: 1
./t9502-gitweb-standalone-parse-output.sh (Wstat: 256 Tests: 10 Failed: 9)
Failed tests: 2-10
Non-zero exit status: 1
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Jakub Narębski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some optional additional Perl modules are required for some of extra
features. Mention those in gitweb/INSTALL.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "--xhtml" option is supported only in highlight < 3.0. There is no option
to enforce (X)HTML output format compatible with both highlight < 3.0 and
highlight >= 3.0. However default output format is HTML so we don't need to
explicitly specify it.
Signed-off-by: Adam Tkac <atkac@redhat.com>
Helped-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It happens that closing file descriptor fails whereas the blob is
perfectly readable. According to perlman the reasons could be:
If the file handle came from a piped open, "close" will additionally
return false if one of the other system calls involved fails, or if the
program exits with non-zero status. (If the only problem was that the
program exited non-zero, $! will be set to 0.) Closing a pipe also waits
for the process executing on the pipe to complete, in case you want to
look at the output of the pipe afterwards, and implicitly puts the exit
status value of that command into $?.
Prematurely closing the read end of a pipe (i.e. before the process writ-
ing to it at the other end has closed it) will result in a SIGPIPE being
delivered to the writer. If the other end can't handle that, be sure to
read all the data before closing the pipe.
In this case we don't mind that close fails.
Signed-off-by: Sylvain Rabot <sylvain@abstraction.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some sites may not want to have a logo at all.
While at it, use $cgi->img to simplify this code. (CGI.pm learned
most HTML4 tags by version 2.79, so this should be portable to perl
5.8, though I haven't tested.)
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Acked-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With v1.5.0-rc0~169 (gitweb: Fix Atom feed <logo>: it is $logo,
not $logo_url, 2006-12-04), the logo URI to be written to Atom
feeds was corrected but the case of no logo forgotten.
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Acked-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
gitweb: Include links to feeds in HTML header only for '200 OK' response
fsck docs: remove outdated and useless diagnostic
userdiff: fix typo in ruby and python word regexes
trace.c: mark file-local function static
Fix typo in git-gc document.
To do that, generating "<link />"s to feeds were refactored into
print_feed_meta() subroutine, to keep nesting (indent) level in
git_header_html() low. This has also the advantage of making code
more clear.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: John 'Warthog9' Hawley <warthog9@eaglescrag.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is needed only to escape attributes of handcrafted HTML elements,
and not those generated using CGI.pm subroutines / methods for HTML
generation.
While at it, add esc_url and esc_html where needed, and prefer to use
CGI.pm HTML generating methods than handcrafted HTML code. Most of
those are probably unnecessary (could be exploited only by person with
write access to gitweb config, or at least access to the repository).
This fixes CVE-2010-3906
Reported-by: Emanuele Gentili <e.gentili@tigersecurity.it>
Helped-by: John 'Warthog9' Hawley <warthog9@kernel.org>
Helped-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When creating path_info part of link, don't encode space as '+', because
while $cgi->param('foo') translates '+' in query param to ' ', neither
$ENV{'PATH_INFO'} nor $cgi->path_info() do.
This fixes the issue with pathnames with embedded whitespace and
$feature{'pathinfo'} / path_info links. It is done by using newly
introduced esc_path_info() instead of esc_url() in href() subroutine.
Also while links are more clear not escaping space (' ') characters in
generated links, the trailing space must be URI-encoded, otherwise would
get discarded.
Issue noticed thanks to John 'Warthog9' Hawley.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* gb/gitweb-remote-heads:
git instaweb: enable remote_heads
gitweb: group remote heads by remote
gitweb: provide a routine to display (sub)sections
gitweb: refactor repository URL printing
gitweb: remotes view for a single remote
gitweb: allow action specialization in page header
gitweb: nagivation menu for tags, heads and remotes
gitweb: separate heads and remotes lists
gitweb: git_get_heads_list accepts an optional list of refs
gitweb: introduce remote_heads feature
gitweb: use fullname as hash_base in heads link
Global variables $my_url, $my_uri and $base_url have subtle interactions
that need to be desribed, and can be influenced most cleanly by
$per_request_config.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Acked-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow selecting whether configuration file should be (re)parsed on each
request (the default, for backward compatibility with configurations that
change per session, see commit 7f425db (gitweb: allow configurations that
change with each request, 2010-07-30)), or whether should it be parsed only
once (for performance speedup for persistent environments, though currently
only FastCGI is able to make use of it, when flexibility is not important).
You can also have configuration file parsed only once, but have parts of
configuration (re)evaluated once per each request.
This is done by introducing $per_request_config variable: if set to code
reference, this code would be run once per request, while config file would
be parsed only once. For example gitolite's contrib/gitweb/gitweb.conf
fragment mentioned in 7f425db could be rewritten as
our $per_request_config = sub {
$ENV{GL_USER} = ($cgi && $cgi->remote_user) || "gitweb";
};
to make use of this feature.
If $per_request_config is not a code reference, it is taken to be boolean
variable, to choose between running config file for each request
(flexibility), and running config file only once (performance in
persistent environments).
The default value for $per_request_config is 1 (true), which means that
old configuration that require to change per session (like gitolite's)
will keep working.
While at it, make it so evaluate_git_version() is run only once.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jn/gitweb-test:
gitweb/Makefile: Include gitweb/config.mak
gitweb/Makefile: Add 'test' and 'test-installed' targets
t/gitweb-lib.sh: Add support for GITWEB_TEST_INSTALLED
gitweb: Move call to evaluate_git_version after evaluate_gitweb_config
In remote and summary view, display a block for each remote, with the
fetch and push URL(s) as well as the list of the remote heads.
In summary view, if the number of remotes is higher than a prescribed
limit, only display the first <limit> remotes and their fetch and push
urls, without any heads information and without grouping.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Acked-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The routine puts the given contento into a DIV element, automatically
adding a header div. The content can be provided as a standard scalar
value (which is used as-is), as a scalar ref (which is HTML-escaped), as
a function reference to be executed, or as a file handle to be dumped.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Acked-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Factor out the code to display the repository URL(s) from summary view
into a format_rep_url() routine.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Acked-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When 'remotes' view is passed the 'hash' parameter, interpret it as the
name of a remote and limit the view the the heads of that remote.
In single-remote view we let the user switch easily to the default
remotes view by specifying an -action_extra for the page header and by
enabling the 'remotes' link in the reference navigation submenu.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Acked-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
An optional -action_extra parameter is given to git_header_html() to
identify a variant of the action that is being displayed. For example,
this can be used to specify that the remotes view is being used for a
specific remote and not to display all remotes.
When -action_extra is provided, the action name in the header will be
turned into a link to the action without any arguments or parameters, to
provide a quick link to the non-specific variant of the action.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Acked-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
tags, heads and remotes are all views that inspect a (particular class
of) refs, so allow the user to easily switch between them by adding
the appropriate navigation submenu to each view.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Acked-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We specialize the 'heads' action to only display local branches, and
introduce a 'remotes' action to display the remote branches (only
available when the remotes_head feature is enabled).
Mirroring this, we also split the heads list in summary view into
local and remote lists, each linking to the appropriate action.
The git_get_heads_list now defaults to 'heads' only, regardless of
whether the remote heads feature is active or not.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Acked-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git_get_heads_list(limit, class1, class2, ...) can now be used to retrieve
refs/class1, refs/class2 etc. Defaults to ('heads', 'remotes') or ('heads')
depending on whether the 'remote_heads' feature is enabled or not.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Acked-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With this feature enabled, remote heads are retrieved (and displayed)
when getting (and displaying) the heads list. Typical usage would be for
local repository browsing, e.g. by using git-instaweb (or even a more
permanent gitweb setup), to check the repository status and the relation
between tracking branches and the originating remotes.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Acked-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Otherwise, if names are manipulated for display, the link will point to
the wrong head.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Acked-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We say 'use 5.008' at the beginning of the script, therefore there is no
need to check if Time::HiRes module is available. We can also import
gettimeofday and tv_interval.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Eli Barzilay noticed that
http://server/gitweb/project/<commit-sha1>
link goes to 'shortlog' view, while 'commit' view would be more
useful, but that 'shortlog' action is more apropriate for
http://server/gitweb/project/<commit-sha1>..<other-commit-sha1>
links.
Therefore for the case when we don't have either action, or filename,
or parent hash [base] in path_info-based URL, i.e. for
http://server/gitweb/project/<object-id>
link, instead of using 'shortlog' view we allow dispatch() subroutine
to detect type of object and use appropriate action (in most case it
would be either 'commit' action, or 'tag', or 'tree' for top
directory).
Requested-by: Eli Barzilay <eli@barzilay.org>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Tested-by: Eli Barzilay <eli@barzilay.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There was bug in parsing "project/:/file" and "project/:/" path_info
URLs, with implicit HEAD as 'hash_base'.
For such URLs the refname is empty, and before this fix regexp for
parsing path_info fragment assumed that it is always non-empty.
Refname cannot contain ':', as per 'git check-ref-format'.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow for gitweb-specific Makefile config to reside in config.mak file
in the 'gitweb/' subdirectory. This means that gitweb-specific
build-time configuration variable can reside in gitweb-specific
gitweb/config.mak
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'test-installed' target in gitweb/Makefile tests installed gitweb,
using the same destination directory that 'install' target uses.
The 'test' target is just a convenience wrapper invoking 'gitweb-test'
target of t/Makefile.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now evaluate_git_version() is inside run_request() to be called for each
request, instead of once per starting gitweb; this currently matters only
when using FastCGI interface (gitweb.fcgi).
This change was done because evaluate_git_version() uses $GIT variable,
which can be set / modified by gitweb config file, but the variable is
modified this way by gitweb config file used in gitweb tests. Without
this change there is spurious extra output from t9500 test when tests are
run with '--debug' option.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Formalize our dependency on perl 5.8, bumped from 5.6.[12]. We already
used the three-arg form of open() which was introduced in 5.6.1, but
t/t9700/test.pl explicitly depended on 5.6.2.
However git-add--interactive.pl has been failing on the 5.6 line since
it was introduced in v1.5.0-rc0~12^2~2 back in 2006 due to this open
syntax:
sub run_cmd_pipe {
my $fh = undef;
open($fh, '-|', @_) or die;
return <$fh>;
}
Which when executed dies on "Can't use an undefined value as
filehandle reference". Several of our tests also fail on 5.6 (even
more when compiled with NO_PERL_MAKEMAKER=1):
t2016-checkout-patch.sh
t3904-stash-patch.sh
t3701-add-interactive.sh
t7105-reset-patch.sh
t7501-commit.sh
t9700-perl-git.sh
Our code is bitrotting on 5.6 with no-one interested in fixing it, and
pinning us to such an ancient release of Perl is keeping us from using
useful features introduced in the 5.8 release.
The 5.6 series is now over 10 years old, and the 5.6.2 maintenance
release almost 7. 5.8 on the other hand is more than 8 years old.
All the modern Unix-like operating systems have now upgraded to it or
a later version, and 5.8 packages are available for old IRIX, AIX
Solaris and Tru64 systems.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Tor Arntsen <tor@spacetec.no>
Acked-by: Randal L. Schwartz <merlyn@stonehenge.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow build-time/run-time configuration of the highlight executable
(must be the one from http://www.andre-simon.de due to assumptions
about parameters and output). Defaults to previous behavior which
assumes that highlight is available on the server PATH. However, if
this is not the case, the path to the highlight executable can be
configured at build time as a configuration variable
HIGHLIGHT_BIN = /path/to/highlight
or at runtime by configuring GITWEB_CONFIG
$highlight_bin = /path/to/highlight
Signed-off-by: Christopher Wilson <cwilson@cdwilson.us>
Acked-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This fixes an XML error when visiting a nonexistent tag
(i.e. "../gitweb.cgi?p=git.git;a=tag;h=refs/tags/BADNAME").
Signed-off-by: Anders Kaseorg <andersk@mit.edu>
Acked-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
gitweb: clarify search results page when no matching commit found
Documentation: add a FILES section for show-ref
Makefile: add missing dependency on http.h
Makefile: add missing dependencies on url.h
Documentation/git-log: Clarify --full-diff
git-rebase: fix typo when parsing --force-rebase
imap-send: Fix sprintf usage
prune: allow --dry-run for -n and --verbose for -v
notes: allow --dry-run for -n and --verbose for -v
Document -B<n>[/<m>], -M<n> and -C<n> variants of -B, -M and -C
Documentation: cite git-am from git-apply
t7003: fix subdirectory-filter test
Allow "check-ref-format --branch" from subdirectory
check-ref-format: handle subcommands in separate functions
pretty-options.txt: match --format's documentation with implementation.
When searching commits for a string that never occurs, the results
page looks something like this:
projects / foo.git / search \o/
summary | ... | tree [commit] search: [ kfjdkas ] [ ]re
first ⋅ prev ⋅ next
Merge branch 'maint'
Foo: a demonstration project
Without a list of hits to compare it to, the header describing the
commit named by the hash parameter (usually HEAD) may itself look
like a hit. Add some text (“No match.”) to replace the empty
list of hits and avoid this confusion.
While at it, remove some nearby dead code, left behind from a
simplification a few years ago (v1.5.4-rc0~276^2~4, 2007-11-01).
Noticed-by: Erick Mattos <erick.mattos@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Acked-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Run $post_dispatch_hook->() not $pre_dispatch_hook->() after each
request.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
gitolite's contrib/gitweb/gitweb.conf includes:
$ENV{GL_USER} = $cgi->remote_user || "gitweb";
which is useful for setups where a user has to be authenticated
to access certain repos. Perhaps other typical configurations
change per session in other ways, too.
v1.7.2-rc2~6 (gitweb: Move evaluate_gitweb_config out of run_request,
2010-07-05) broke such configurations for a speedup, by loading
the configuration once per FastCGI process.
Probably in the end there should be a way to specify in the
configuration whether a particular installation wants the speedup or
the flexibility. But for now it is easier to just undo the relevant
change.
This partially reverts commit 869d58813b.
Reported-by: Julio Lajara <julio.lajara@alum.rpi.edu>
Analysis-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move highlight config out of guess_file_syntax() so that it can be
extended/overridden by system/user configuration.
Signed-off-by: Alejandro R. Sedeño <asedeno@mit.edu>
Acked-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Earlier, 452e225 (gitweb: fix esc_param, 2009-10-13) fixed CGI escaping
rules used in esc_url. A very similar logic exists in esc_param and needs
to be fixed the same way.
Signed-off-by: Pavan Kumar Sunkara <pavan.sss1991@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move evaluate_gitweb_config() and evaluate_git_version() out of
run_request() to run(), making them not run one for each request.
This changes how git behaves in FastCGI case.
This change makes it impossible to have config which changes with
request, but I don't think anyone relied on such (hidden action)
behavior.
While at it, reset timer and number of git commands at beginning of
run_request() in new reset_timer() subroutine. This fixes case when
gitweb was run using FastCGI interface: time is reported for request,
and not for single run of gitweb script. This changes slightly
behavior in non-FastCGI case: the number of git commands reported is
1 less (running `git --version` one per gitweb is not counted now).
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jn/gitweb-fastcgi:
gitweb: Run in FastCGI mode if gitweb script has .fcgi extension
gitweb: Add support for FastCGI, using CGI::Fast
gitweb: Put all per-connection code in run() subroutine
This typo has been in place since the rule was originally added by
0e6ce21 (Gitweb: add support for minifying gitweb.css).
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jn/gitweb-plackup:
git-instaweb: Add support for running gitweb via 'plackup'
git-instaweb: Wait for server to start before running web browser
git-instaweb: Remove pidfile after stopping web server
git-instaweb: Configure it to work with new gitweb structure
git-instaweb: Put httpd logs in a "$httpd_only" subdirectory
gitweb: Set default destination directory for installing gitweb in Makefile
gitweb: Move static files into seperate subdirectory
Check if there is a caller in top frame of gitweb, and either 'return'
if gitweb code is wrapped in subroutine, or 'exit' if it is not.
This should avoid
gitweb.cgi: Subroutine git_SOMETHING redefined at gitweb.cgi line NNN
warnings in error_log when running gitweb with mod_perl (using
ModPerl::Registry handler)
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The name of the key has to be the same in call site handle_errors_html
and in called subroutine that uses it, i.e. git_header_html.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the name of the script ($SCRIPT_NAME or $SCRIPT_FILENAME CGI
environment variable, or __FILE__ literal) ends with '.fcgi'
extension, run gitweb in FastCGI mode, as if it was run with
'--fastcgi' / '--fcgi' option.
This is intended for easy deploying gitweb using FastCGI
interface.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Create a new subdirectory called 'static' in gitweb/, and move
all static files required by gitweb.cgi when running, which means
styles, images and Javascript code. This should make gitweb more
readable and easier to maintain.
Update t/gitweb-lib.sh to reflect this change.The install-gitweb
now also include moving of static files into 'static' subdirectory
in target directory: update Makefile, gitweb's INSTALL, README and
Makefile accordingly.
Signed-off-by: Pavan Kumar Sunkara <pavan.sss1991@gmail.com>
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Mentored-by: Petr Baudis <pasky@ucw.cz>
Acked-by: Jakub Narebski <jnareb@gmail.com>
Acked-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jn/gitweb-caching-prep:
gitweb: Move generating page title to separate subroutine
gitweb: Add custom error handler using die_error
gitweb: Use nonlocal jump instead of 'exit' in die_error
gitweb: href(..., -path_info => 0|1)
Export more test-related variables when running external tests
Make git-format-patch (used by 'patch' and 'patches' views) use the
same rename detection options that git-diff and git-diff-tree (used
by 'commitdiff', 'blobdiff', etc.) use.
Signed-off-by: Pavan Kumar Sunkara <pavan.sss1991@gmail.com>
Acked-by: Jakub Narebski <jnareb@gmail.com>
Acked-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Former run() subroutine got renamed to run_request(). The new run()
subroutine can run multiple requests at once if run as FastCGI script.
To run gitweb as FastCGI script you must specify '--fastcgi' / '-f'
command line option to gitweb, otherwise it runs as an ordinary CGI
script.
[jn: cherry picked from 56d7d436644ab296155a697552ea1345f2701620
in http://utsl.gen.nz/gitweb/?p=gitweb which was originally based
on v264 (2326acfa95) by Kay Sievers;
updated to reflect current gitweb code]
TODO: update 'gitweb/README' and/or 'gitweb/INSTALL' files.
Signed-off-by: Sam Vilain <sam.vilain@catalyst.net.nz>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All code that is run per-connection (as opposed to those parts of gitweb
code that can be run once) is put into appropriate subroutines:
- evaluate_uri
- evaluate_gitweb_config
- evaluate_git_version (here only because $GIT can be set in config)
- check_loadavg (as soon as possible; $git_version must be defined)
- evaluate_query_params (counterpart to evaluate_path_info)
- evaluate_and_validate_params
- evaluate_git_dir (requires $project)
- configure_gitweb_features (@snapshot_fmts, $git_avatar)
- dispatch (includes setting default $action)
The difference is best viewed with '-w', '--ignore-all-space' option,
because of reindent caused by putting code in subroutines.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This refactoring (adding guess_file_syntax and run_highlighter
subroutines) is meant to make it easier in the future to add support
for other syntax highlighing solutions, or make it smarter by not
re-running `git cat-file` second time.
Instead of looping over list of regexps (keys of %highlight_type hash),
make use of the fact that choosing syntax is based either on full
basename (%highlight_basename), or on file extension (%highlight_ext).
Add some basic test of syntax highlighting (with 'highlight' as
prerequisite) to t/t9500-gitweb-standalone-no-errors.sh test.
While at it make git_blob Perl style prettier.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Acked-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It requires the 'highlight' program to do all the heavy-lifting.
This is loosely based on Daniel Svensson's and Sham Chukoury's work in
gitweb-xmms2.git (it cannot be cherry-picked, as gitweb-xmms2 first forked
wildly, then not contributed back, and then went stale).
[jn: cherry picked from bc1ed6aafd9ee4937559535c66c8bddf1864bec6
in http://repo.or.cz/w/git/dscho.git, with a few changes]
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Acked-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Installing gitweb is now as easy as
# make gitwebdir=/var/www/cgi-bin gitweb-install ;# as root
The gitweb/INSTALL file was updated accordingly, to make use of this
new target.
Fix shell quoting, i.e. setting bindir_SQ etc., in gitweb/Makefile.
Those variables were not used previously.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When $projects_list points to a directory, and git_get_projects_list
scans this directory for repositories, there can be generated the
following warnings (for persistent services like mod_perl or plackup):
Variable "$project_maxdepth" may be unavailable at gitweb.cgi line 2443.
Variable "$projectroot" may be unavailable at gitweb.cgi line 2451.
Those are false positives; silence those warnings by explicitely
declaring $project_maxdepth and $projectroot with 'our', as global
variables, in anonymous subrotine passed to File::Find::find.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
get_page_title subroutine is currently used only in git_header_html.
Nevertheless refactoring title generation allowed to reduce indent
level.
It would be used in more than one callsite in the patch adding caching
activity indicator to gitweb.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Acked-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the default message for errors (for fatalsToBrowser) to use
die_error() subroutine. This way errors (and explicitely calling 'die
MESSAGE') would generate 'Internal Server Error' error message.
Note that call to set_message is intentionally not put in BEGIN block;
we set error handler to use die_error() only after we are sure that we
can use it, after all needed variables are set.
Due to the fact that error handler set via set_message() subroutine
from CGI::Carp (in the fatalsToBrowser case) is called after HTTP
headers were already printed (with exception of MOD_PERL), gitweb
cannot return 'Status: 500 Internal Server Error'.
Thanks to the fact that die_error() no longer uses 'exit', errors
would be logged by CGI::Carp, independent on whether default error
handler is used, or handle_errors_html which uses die_error is used.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Acked-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use 'goto DONE' in place of 'exit' to end request processing in
die_error() subroutine. While at it, do not end gitweb with 'exit'.
This would make it easier in the future to add support or improve
support for persistent environments such as FastCGI and mod_perl.
It would also make it easier to make use of die_error() as an error
handler (for fatalsToBrowser).
Perl 5 allows non-local jumps; the restriction is that you cannot jump
into a scope.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Acked-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If named boolean option -path_info is passed to href() subroutine, it
would use its value to decide whether to generate path_info URL form.
If this option is not passed, href() queries 'pathinfo' feature to
check whether to generate path_info URL (if generating path_info link
is possible at all).
href(-replay=>1, -path_info=>0) is meant to be used to generate a key
for caching gitweb output; alternate solution would be to use freeze()
from Storable (core module) on %input_params hash (or its reference),
e.g.:
$key = freeze \%input_params;
or other serialization of %input_params.
While at it document extra options/flags to href().
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Acked-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
GITWEB_CSS and GITWEB_JS are meant to be "what URI should the installed
cgi script use to refer to the stylesheet and JavaScript", never "this
is the name of the file we are building". Don't use them to decide what
file to build minified versions in.
While we are at it, lose FILES that is used only for "clean" target in a
misguided way. "make clean" should try to remove all the potential
build artifacts regardless of a minor configuration change. Instead of
trying to remove only the build product "make clean" would have created
if it were run without "clean", explicitly list the three potential build
products for removal.
Tested-by: Mark Rada <marada@uwaterloo.co>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Gitweb can be generated by the gitweb/gitweb.cgi target or the gitweb
target. Since the gitweb target is shorter, I think it would be better
to have new users be instructed to use it.
Signed-off-by: Mark Rada <marada@uwaterloo.ca>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch updates gitweb/INSTALL to mention gitweb.js, including
JavaScript minification support.
Signed-off-by: Mark Rada <marada@uwaterloo.ca>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This will allow users to set a JavaScript/CSS minifier when/if they run
the autoconfigure script while building git.
Signed-off-by: Mark Rada <marada@uwaterloo.ca>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The build system added support minifying gitweb.js through a
JavaScript minifier, but most minifiers come with support for
minifying CSS files as well, so we should use it if we can.
This patch will add the same facilities to gitweb.css that
gitweb.js has for minification. That does not mean that they
will use the same minifier though, as it is not safe to assume
that all JavaScript minifiers will also minify CSS files.
This patch also adds the GITWEB_PROGRAMS variable to the Makefile
to keep a list of potential gitweb dependencies separate from
OTHER_PROGRAMS when we need to know just the gitweb dependencies.
Though the bandwidth savings will not be as dramatic as with
the JavaScript minifier, every byte saved is important.
Signed-off-by: Mark Rada <marada@uwaterloo.ca>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix overeager early return in git_get_project_config, introduced in 9be3614
(gitweb: Fix project-specific feature override behavior, 2010-03-01). When
git_get_project_config is called from projects list page via
git_get_project_owner($path) etc., it is called with $git_dir defined (in
git_get_project_owner($path) etc.), but $project variable is not defined.
git_get_project_config doesn't use $project variable anyway.
Reported-by: Tobias Heinlein <keytoaster@gentoo.org>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit fixes a bug in processing project-specific override in
a situation when there is no project, e.g. for the projects list page.
When 'snapshot' feature had project specific config override enabled
by putting
$feature{'snapshot'}{'override'} = 1;
(or equivalent) in $GITWEB_CONFIG, and when viewing toplevel gitweb
page, which means the projects list page (to be more exact this
happens for any project-less action), gitweb would put the following
Perl warnings in error log:
gitweb.cgi: Use of uninitialized value $git_dir in concatenation (.) or string at gitweb.cgi line 2065.
fatal: error processing config file(s)
gitweb.cgi: Use of uninitialized value $git_dir in concatenation (.) or string at gitweb.cgi line 2221.
gitweb.cgi: Use of uninitialized value $git_dir in concatenation (.) or string at gitweb.cgi line 2218.
The problem is in the following fragment of code:
# path to the current git repository
our $git_dir;
$git_dir = "$projectroot/$project" if $project;
# list of supported snapshot formats
our @snapshot_fmts = gitweb_get_feature('snapshot');
@snapshot_fmts = filter_snapshot_fmts(@snapshot_fmts);
For the toplevel gitweb page, which is the list of projects, $project is not
defined, therefore neither is $git_dir. gitweb_get_feature() subroutine
calls git_get_project_config() if project specific override is turned
on... but we don't have project here.
Those errors mentioned above occur in the following fragment of code in
git_get_project_config():
# get config
if (!defined $config_file ||
$config_file ne "$git_dir/config") {
%config = git_parse_project_config('gitweb');
$config_file = "$git_dir/config";
}
git_parse_project_config() calls git_cmd() which has '--git-dir='.$git_dir
There are (at least) three possible solutions:
1. Harden gitweb_get_feature() so that it doesn't call
git_get_project_config() if $project (and therefore $git_dir) is not
defined; there is no project for project specific config.
2. Harden git_get_project_config() like you did in your fix, returning early
if $git_dir is not defined.
3. Harden git_cmd() so that it doesn't add "--git-dir=$git_dir" if $git_dir
is not defined, and change git_get_project_config() so that it doesn't
even try to access $git_dir if it is not defined.
This commit implements both 1.) and 2.), i.e. gitweb_get_feature() doesn't
call project-specific override if $git_dir is not defined (if there is no
project), and git_get_project_config() returns early if $git_dir is not
defined.
Add a test for this bug to t/t9500-gitweb-standalone-no-errors.sh test.
Reported-by: Eli Barzilay <eli@barzilay.org>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit adds in the gitweb/README file a description of how to use gitweb
with several project roots using apache virtualhost rewrite rules.
Signed-off-by: Sylvain Rabot <sylvain@abstraction.fr>
Acked-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is a bit of future-proofing esc_html and friends: when called
with undefined value they would now would return undef... which would
probably mean that error would still occur, but closer to the source
of problem.
This means that we can safely use
esc_html(shift) || "Internal Server Error"
in die_error() instead of
esc_html(shift || "Internal Server Error")
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The error message (second argument to die_error) is meant to be short,
one-line text description of given error. A few callers call
die_error with error message containing unescaped user supplied data
($hash, $file_name). Instead of forcing callers to escape data,
simply call esc_html on the parameter.
Note that optional third parameter, which contains detailed error
description, is meant to be HTML formatted, and therefore should be
not escaped.
While at it update esc_html synopsis/usage, and bring default error
description to read 'Internal Server Error' (titlecased).
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Otherwise the errors can propagate, and show in damnest places, and
you would spend your time chasing ghosts instead of debugging real
problem (yes, it is from personal experience).
This follows (parts of) advice in `perldoc -f do` documentation.
This required restructoring code a bit, so we die only if we are reading
(executing) config file. As a side effect $GITWEB_CONFIG_SYSTEM is always
available, even when we use $GITWEB_CONFIG.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The chop_str subroutine is meant to be used on strings (such as commit
description / title) *before* HTML escaping, which means before
applying esc_html or equivalent.
Therefore get rid of the failed attempt to always remove full HTML
entities (like e.g. & or ). It is not necessary (HTML
entities gets added later), and it can cause chop_str to chop a string
incorrectly.
Specifically:
API & protocol: support option to force written data immediately to disk
from http://git.kernel.org/?p=daemon/distsrv/chunkd.git;a=commit;h=3b02f749df2cb1288f345a689d85e7061f507e54
The short version of the title gets chopped to
API ...
where it should be
API & protocol: support option to force written data...
Noticed-by: John 'Warthog9' Hawley <warthog9@kernel.org>
Signed-off-by: John 'Warthog9' Hawley <warthog9@kernel.org>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a 3rd, optional, parameter to die_error to allow for extended error
information to be output along with what the error was.
Signed-off-by: John 'Warthog9' Hawley <warthog9@kernel.org>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a function (named format_sort_th) that returns the string that
print_sort_th would print.
Signed-off-by: John 'Warthog9' Hawley <warthog9@kernel.org>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a function (named format_local_time) that returns the string that
print_local_time would print.
Signed-off-by: John 'Warthog9' Hawley <warthog9@kernel.org>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If one of $site_header, $site_footer or $home_text is not defined, you
get extraneous errors in the web logs, for example (line wrapped for
better readibility):
[Wed Jan 13 16:55:42 2010] [error] [client ::1] [Wed Jan 13 16:55:42 2010]
gitweb.cgi: Use of uninitialized value $site_header in -f at
/var/www/gitweb/gitweb.cgi line 3287., referer: http://git/gitweb.cgi
This ensures that those variables are defined before trying to use it.
Note that such error can happen only because of an error in gitweb
config file; building gitweb.cgi can make mentioned variables holding
empty string (it is even the default), but they are still defined.
Signed-off-by: John 'Warthog9' Hawley <warthog9@kernel.org>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Adjust the main Makefile so you can simply run
make gitweb
which in turn calls gitweb/Makefile. This means that in order to
generate gitweb, you can simply run 'make' from gitweb subdirectory:
cd gitweb
make
Targets gitweb/gitweb.cgi and (dependent on JSMIN being defined)
gitweb/gitweb.min.js in main Makefile are preserved for backward
compatibility.
Signed-off-by: John 'Warthog9' Hawley <warthog9@kernel.org>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This changes slightly the behavior of gitweb, so that it verifies
that the box isn't inundated with before attempting to serve gitweb.
If the box is overloaded, it basically returns a 503 Server Unavailable
until the load falls below the defined threshold. This helps dramatically
if you have a box that's I/O bound, reaches a certain load and you
don't want gitweb, the I/O hog that it is, increasing the pain the
server is already undergoing.
This behavior is controlled by $maxload configuration variable.
Default is a load of 300, which for most cases should never be hit.
Unset it (set it to undefined value, i.e. undef) to turn off checking.
Currently it requires that '/proc/loadavg' file exists, otherwise the
load check is bypassed (load is taken to be 0). So platforms that do
not implement '/proc/loadavg' currently cannot use this feature
(provisions are included for additional checks to be added by others).
There is simple test in t/t9501-gitweb-standalone-http-status.sh to
check that it correctly returns "503 Service Unavailable" if load is
too high, and also if there are any Perl warnings or errors.
Signed-off-by: John 'Warthog9' Hawley <warthog9@kernel.org>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In Internet Explorer 8 (IE8) the 'blame_incremental' view, which uses
JavaScript to generate blame info using AJAX, sometimes hang at the
beginning (at 0%) of blaming, e.g. for larger files with long history
like git's own gitweb/gitweb.perl.
The error shown by JavaScript console is "Unspecified error" at char:2
of the following line in gitweb/gitweb.js:
if (xhr.readyState === 3 && xhr.status !== 200) {
Debugging it using IE8 JScript debuger shown that the error occurs
when trying to access xhr.status (xhr is XMLHttpRequest object).
Watch for xhr object shows 'Unspecified error.' as "value" of
xhr.status, and trying to access xhr.status from console throws error.
This bug is some intermittent bug, depending on XMLHttpRequest timing,
as it doesn't occur in all cases. It is probably caused by the fact
that handleResponse is called from timer (pollTimer), to work around
the fact that some browsers call onreadystatechange handler only once
for each state change, and not like required for 'blame_incremental'
as soon as new data is available from server. It looks like xhr
object is not properly initialized; still it is a bug to throw an
error when accessing xhr.status (and not use 'null' or 'undefined' as
value).
Work around this bug in IE8 by using try-catch block when accessing
xhr.status.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jn/gitweb-blame:
gitweb: Add link to other blame implementation in blame views
gitweb: Make linking to actions requiring JavaScript a feature
gitweb.js: fix padLeftStr() and its usage
gitweb.js: Harden setting blamed commit info in incremental blame
gitweb.js: fix null object exception in initials calculation
gitweb: Minify gitweb.js if JSMIN is defined
gitweb: Create links leading to 'blame_incremental' using JavaScript
gitweb: Colorize 'blame_incremental' view during processing
gitweb: Incremental blame (using JavaScript)
gitweb: Add optional "time to generate page" info in footer
Conflicts:
Makefile
gitweb/gitweb.css
Add link to 'blame_incremental' action (which requires JavaScript) in
'blame' view, and add link to 'blame' action in 'blame_incremental'
view.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Let gitweb turn some links (like 'blame' links) into linking to actions
which require JavaScript (like 'blame_incremental' action) only if
'javascript-actions' feature is enabled.
This means that links to such actions would be present only if both
JavaScript is enabled and 'javascript-actions' feature is enabled.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It seems that in Firefox-3.5 inserting with javascript inserts the
literal instead of a space. Fix this by inserting the unicode
representation for instead.
Also fix the off-by-one error in the padding calculation that was
causing one less space to be inserted than was requested by the caller.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Cc: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Internet Explorer 8 stops at beginning of blame filling with the
following bug:
"firstChild is null or not an object"
at this line:
a_sha1.firstChild.data = commit.sha1.substr(0, 8);
It is (probably) caused by the fact that while a_sha1 element, which
looks like this:
<a href=""> </a>
It has a firstChild which is a text node containing only whitespace
(single space character) in other web browsers (Firefox 3.5, Opera 10,
Google Chrome 3.0), IE8 clobbers DOM, removing trailing/leading
whitespace.
Protect against this bug by creating text element if it does not
exist.
Found-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mr/gitweb-snapshot:
t/gitweb-lib: Split HTTP response with non-GNU sed
gitweb: Smarter snapshot names
gitweb: Document current snapshot rules via new tests
t/gitweb-lib.sh: Split gitweb output into headers and body
gitweb: check given hash before trying to create snapshot
Currently handleLine() assumes that a commit author name will always
start with a capital letter. It's possible that the author name is
user@example.com and therefore calling a match() on the name will fail
to return any matches. Subsequently joining these matches will cause an
exception. Fix by checking that we have a match before trying to join
the results into a set of initials for the author.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Acked-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make git_history use git_log_generic, passing git_history_body as one
of its paramaters. This required changes to git_log_generic, in
particular passing more things as parameters.
While refactoring common code of 'log', 'shortlog' and 'history' view,
we did unify pagination, using always the form used by 'history' view,
namely
first * prev * next
in place of
HEAD * prev * next
used by 'log' and 'shortlog' views.
The 'history' view now supports commit limiting via 'hpb' parameter,
similarly to 'shortlog' (and 'log') view. Performance of 'history'
view got improved a bit, as it doesn't run git_get_hash_by_path for
"current" version in a loop. Error detection and reporting for
'history' view changed a bit.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Put the common parts of git_log and git_shortlog into git_log_generic
subroutine: git_log and git_shortlog are now thin wrappers calling
git_log_generic with appropriate arguments.
The unification of code responsible for 'log' and 'shorlog' actions
lead to the following changes in gitweb output
* 'tree' link in page_nav now uses $hash parameter, as was the case
for 'shortlog' but not for 'log'
* 'log' view now respect $hash_parent limiting, like 'shortlog' did
* 'log' view doesn't have special case for empty list anymore, and it
always uses page_header linking to summary view, like 'shortlog'
did.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Put the main part of 'log' view generation into git_log_body,
similarly how it is done for 'shortlog' and 'history' views (and
also for 'tags' and 'heads' views).
This is preparation for extracting common code between 'log',
'shortlog' and 'history' actions.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach gitweb how to produce nicer snapshot names by only using the
short hash id. If clients make requests using a tree-ish that is not
a partial or full SHA-1 hash, then the short hash will also be appended
to whatever they asked for. If clients request snapshot of a tag
(which means that $hash ('h') parameter has 'refs/tags/' prefix),
use only tag name.
Update tests cases in t9502-gitweb-standalone-parse-output.
Gitweb uses the following format for snapshot filenames:
<sanitized project name>-<version info>.<snapshot suffix>
where <sanitized project name> is project name with '.git' or '/.git'
suffix stripped, unless '.git' is the whole project name. For
snapshot prefix it uses:
<sanitized project name>-<version info>/
as compared to <sanitized project name>/ before (without version info).
Current rules for <version info>:
* if 'h' / $hash parameter is SHA-1 or shortened SHA-1, use SHA-1
shortened to to 7 characters
* otherwise if 'h' / $hash parameter is tag name (it begins with
'refs/tags/' prefix, use tag name (with 'refs/tags/' stripped
* otherwise if 'h' / $hash parameter starts with 'refs/heads/' prefix,
strip this prefix, convert '/' into '.', and append shortened SHA-1
after '-', i.e. use <sanitized hash>-<shortened sha1>
Signed-off-by: Mark Rada <marada@uwaterloo.ca>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In pathinfo mode, we use <base href> that refers to the base location
of gitweb in order for various external media links to work well.
However, this means that for the page to refer to itself, it must
regenerate full link, and this is exactly what the blob view page
did not do for line numbers.
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's nice to search for an author by merely clicking on their name in
gitweb. This is usually faster than selecting the name, copying the
selection, pasting it into the search box, selecting between
author/committer and then hitting enter.
Linkify the avatar icon in log/shortlog view because the icon is directly
adjacent to the name and thus more related. The same is not true
when in commit/tag view where the icon is farther away.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The custom CGI escaping done in esc_param failed to escape UTF-8
properly. Fix by using CGI::escape on each sequence of matched
characters instead of sprintf()ing a custom escaping for each byte.
Additionally, the space -> + escape was being escaped due to greedy
matching on the first substitution. Fix by adding space to the
list of characters not handled on the first substitution.
Finally, remove an unnecessary escaping of the + sign.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'patch' view is about generating text/plain patch that can be
given to "git am", and "git am" doesn't understand merges anyway.
Therefore link to 'patch' view should not be shown for merge commits.
Also call to git-format-patch inside the 'patch' action would fail
when 'patch' action is called for a merge commit, with "Reading
git-format-patch failed" text as 'patch' view body.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Makes things nicer in cases when you hand craft the snapshot URL but
make a typo in defining the hash variable (e.g. netx instead of next);
you will now get an error message instead of a broken tarball.
Tests for t9501 are included to demonstrate added functionality.
Signed-off-by: Mark Rada <marada@uwaterloo.ca>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Add support for 'show-sizes' feature to show (in separate column,
between mode and filename) the size of blobs (files) in the 'tree'
view. It passes '-l' option to "git ls-tree" invocation.
For the 'tree' and 'commit' (submodule) entries, '-' is shown in place
of size; for generated '..' "up directory" entry nothing is shown.
The 'show-sizes' feature is enabled by default.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new 'blame_incremental' view requires JavaScript to run. Not all
web browsers implement JavaScript (e.g. text browsers such as Lynx),
and not all users have JavaScript enabled. Therefore instead of
unconditionally linking to 'blame_incremental' view, we use JavaScript
to convert those links to lead to view utilizing JavaScript, by adding
'js=1' to link.
Currently the only action that takes 'js=1' into account is 'blame',
which then acts as if it was called as 'blame_incremental' action.
Possible enhancement would be to do JavaScript redirect by setting
window.location instead of modifying $format and $action in
git_blame_common() subroutine.
The only JavaScript-aware/using view is currently 'blame_incremental'.
While at it move reading JavaScript to git_footer_html() subroutine.
Note that in this view we do not add 'js=1' currently (even though
perhaps we should; note that for consistency we should also add 'js=1'
in links added by JavaScript part of 'blame_incremental').
This idea was originally implemented by Petr Baudis in
http://article.gmane.org/gmane.comp.version-control.git/47614
but it added <script> element with fixBlameLinks() function in page
header, to be added as onload event using 'onload' attribute of HTML
'body' element: <body onload="fixBlameLinks();">. This version adds
script at then end of page (in the page footer), and uses JavaScript
'window.onload=fixLinks();'. Also in Petr version only links marked
with 'blamelink' class were modified, and they were modified by
replacing "a=blame" by "a=blame_incremental"... which doesn't work for
path_info links, and might replace wrong part if there is "a=blame" in
project name, ref name or file name.
Slightly different solution was implemented by Martin Koegler in
http://thread.gmane.org/gmane.comp.version-control.git/47902/focus=47905
Here GitAddLinks() function was in gitweb.js file, not as contents of
<script> element. It was also included in page header (in <head>
element) though, which means waiting for a script to load (and run).
It was smarter in that to "fix" (modify) link, it split URL, modified
value of 'a' parameter, and then recreated modified link. It avoids
trouble with "a=blame" as substring in project name or file name, but
it doesn't work with path_info URL/link in the way it was written.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This requires using 3 colors, not only two, to choose a color that is
different from colors of up to 2 neighbors.
gitweb.js selects the least used color, if more than one color is
possible.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add 'blame_incremental' view, which uses "git blame --incremental"
and JavaScript (Ajax), where 'blame' use "git blame --porcelain".
* gitweb generates initial info by putting file contents (from
"git cat-file") together with line numbers in blame table
* then gitweb makes web browser JavaScript engine call startBlame()
function from gitweb.js
* startBlame() opens XMLHttpRequest connection to 'blame_data' view,
which in turn calls "git blame --incremental" for a file, and
streams output of git-blame to JavaScript (gitweb.js)
* XMLHttpRequest event handler updates line info in blame view as soon
as it gets data from 'blame_data' (from server), and it also updates
progress info
* when 'blame_data' ends, and gitweb.js finishes updating line info,
it fixes colors to match (as far as possible) ordinary 'blame' view,
and updates information about how long it took to generate page.
Gitweb deals with streamed 'blame_data' server errors by displaying
them in the progress info area (just in case).
The 'blame_incremental' view tries to be equivalent to 'blame' action;
there are however a few differences in output between 'blame' and
'blame_incremental' view:
* 'blame_incremental' always used query form for this part of link(s)
which is generated by JavaScript code. The difference is visible
if we use path_info link (pass some or all arguments in path_info).
Changing this would require implementing something akin to href()
subroutine from gitweb.perl in JavaScript (in gitweb.js).
* 'blame_incremental' always uses "rowspan" attribute, even if
rowspan="1". This simplifies code, and is not visible to user.
* The progress bar and progress info are still there even after
JavaScript part of 'blame_incremental' finishes work.
Note that currently no link generated by gitweb leads to this new view.
This code is based on patch by Petr Baudis <pasky@suse.cz> patch, which
in turn was tweaked up version of Fredrik Kuivinen <frekui@gmail.com>'s
proof of concept patch.
This patch adds GITWEB_JS compile configuration option, and modifies
git-instaweb.sh to take gitweb.js into account. The code for
git-instaweb.sh was taken from Pasky's patch.
Signed-off-by: Fredrik Kuivinen <frekui@gmail.com>
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add "This page took XXX seconds and Y git commands to generate"
to page footer, if global feature 'timed' is enabled (disabled
by default). Requires Time::HiRes installed for high precision
'wallclock' time.
Note that Time::HiRes is being required unconditionally; this is
because setting $t0 variable needs to be done fairly early to have
running time of the whole script. If Time::HiRes module were required
only if 'timed' feature is enabled, the earliest place where starting
time ($t0) could be calculated would be after reading gitweb config,
making "time to generate page" info inaccurate.
This code is based on example code by Petr 'Pasky' Baudis.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mr/gitweb-snapshot:
gitweb: add t9501 tests for checking HTTP status codes
gitweb: split test suite into library and tests
gitweb: improve snapshot error handling
* maint:
Fix overridable written with an extra 'e'
Documentation: git-archive: mark --format as optional in summary
Round-down years in "years+months" relative date view
* maint-1.6.3:
Fix overridable written with an extra 'e'
Documentation: git-archive: mark --format as optional in summary
Round-down years in "years+months" relative date view
* maint-1.6.2:
Fix overridable written with an extra 'e'
Documentation: git-archive: mark --format as optional in summary
Round-down years in "years+months" relative date view
Conflicts:
Documentation/git-archive.txt
The last check in the second block of checks in the &git_snapshot routine
is never executed because the second to last check is a superset of the
last check.
Switch the order of the last two checks. It has the advantage of giving
clients a more specific reason why they cannot get a snapshot format if
the format they have chosen is disabled.
Signed-off-by: Mark Rada <marada@uwaterloo.ca>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mr/gitweb-xz:
gitweb: add support for XZ compressed snapshots
gitweb: update INSTALL regarding specific snapshot settings
gitweb: support to globally disable a snapshot format
Since 4afbaef (gitweb: ref markers link to named shortlogs, 2008-09-02),
ref markers that accompany the subject in views such as shortlog and
history point to something different from the subject itself. Therefore,
they should not be included in the same <a> element.
Benefits of the change are:
* better compliance to the XHTML standards, that forbid links within
links even though the restriction cannot be imposed via DTD; this also
benefits visualization in some older browsers;
* when hovering the subject, only the subject itself is underlined; when
hovering the ref markers, only the text in the hovered ref marker is
underlined; previously, hovering any written part of the subject column
led to complete underlying of everything at the same time, with
unpleasing effects.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Acked-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reduce size of git-favicon.png using a combination of optipng and
pngout. From 164 bytes to 115 bytes (30% reduction). Also reduce
git-logo.png's size by one byte using advcomp.
Signed-off-by: Benjamin Kramer <benny.kra@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* 'jn/gitweb-blame' (early part):
gitweb: Use light/dark for class names also in 'blame' view
gitweb: Add author initials in 'blame' view, a la "git gui blame"
gitweb: Mark commits with no "previous" in 'blame' view
gitweb: Use "previous" header of git-blame -p in 'blame' view
gitweb: Mark boundary commits in 'blame' view
gitweb: Make .error style generic
The XZ compression format uses the LZMA2 compression algorithm, which
often yields higher compression ratios than both GZip and BZip2 at the
cost of using more CPU time and RAM. XZ is the slowest for compression,
but still much faster than BZip2 for decompression, almost comparable
to GZip (see benchmarks below).
Some simple benchmarks show the pros and cons of using XZ compression;
starting with an already tarball'd archive of the repos listed below.
Memory usage seemed to be consistent for any given algorithm at their
respective default compression levels.
CPU: AMD Sempron 3400+ (1 core @ 1.8GHz with 256K L2 cache)
Virtual Memory Usage
GZip: 4152K BZip2: 13352K XZ: 102M
Linux 2.6 series (f5886c7f96f2542382d3a983c5f13e03d7fc5259) 349M
gzip 23.70s user 0.47s system 99% cpu 24.227 total 76M
gunzip 3.74s user 0.74s system 94% cpu 4.741 total
bzip2 130.96s user 0.53s system 99% cpu 2:11.97 total 59M
bunzip2 31.05s user 1.02s system 99% cpu 32.355 total
xz 448.78s user 0.91s system 99% cpu 7:31.28 total 51M
unxz 7.67s user 0.80s system 98% cpu 8.607 total
Git (0a53e9ddea) 11M
gzip 0.77s user 0.03s system 99% cpu 0.792 total 2.5M
gunzip 0.12s user 0.02s system 98% cpu 0.142 total
bzip2 3.42s user 0.02s system 99% cpu 3.454 total 2.1M
bunzip2 0.95s user 0.03s system 99% cpu 0.984 total
xz 12.88s user 0.14s system 98% cpu 13.239 total 1.9M
unxz 0.27s user 0.03s system 99% cpu 0.298 total
XZ (669413bb2db954bbfde3c4542fddbbab53891eb4) 1.8M
gzip 0.12s user 0.00s system 95% cpu 0.132 total 442K
gunzip 0.02s user 0.00s system 97% cpu 0.027 total
bzip2 1.28s user 0.01s system 99% cpu 1.298 total 363K
bunzip2 0.15s user 0.01s system 100% cpu 0.157 total
xz 1.62s user 0.03s system 99% cpu 1.652 total 347K
unxz 0.05s user 0.00s system 99% cpu 0.058 total
From a time and memory perspective, nothing compares to GZip, but if
given an average upload speed of 20KB/s, it would take ~400 seconds
longer to transfer the BZip2'd kernel snapshot than the XZ snapshot;
the transfer time difference is even greater between GZip and XZ. The
real time savings are relatively the same for all test cases, but less
dramatic for smaller repositories.
XZ decompresses ~1.8-2 times slower than GZip, and ~2.7-3.75 times
faster than BZip2; XZ gets relatively faster as snapshots get larger.
However, XZ takes relatively longer to compress as snapshots get larger.
The downside for XZ'd snapshots is the large CPU and memory load put on
the server to generate the compressed snapshot, though XZ will
eventually
have threading support, and the real clock time for making XZ'd
snapshots
would decrease if the server had a beefy multi-core CPU.
XZ compression is disabled by default to allow upgrades to take place
without any surprises, as the CPU and memory requirements will be an
issue for high load or lightweight servers. Also, the XZ format is still
new (format declared stable ~6 months ago), and there have been no
"stable" releases of the utils yet.
Signed-off-by: Mark Rada <marada@uwaterloo.ca>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This includes instructions on how to disable a snapshot format and how
to add options to a snapshot format (e.g. setting the compression
level).
Signed-off-by: Mark Rada <marada@uwaterloo.ca>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow Gitweb administrators to set a 'disabled' key in the
%known_snapshot_formats hash to disable a specific snapshot format.
All formats are enabled by default to maintain backwards compatibility.
Signed-off-by: Mark Rada <marada@uwaterloo.ca>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Call to_utf8 when parsing author and committer names, otherwise they will appear
with bad encoding if they written by using chop_and_escape_str.
Signed-off-by: Zoltán Füzesi <zfuzesi@eaglet.hu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Equality between file_parent and file_name was being checked without a
preliminary check for existence of the parameters.
Fix by wrapping the equality check in appropriate if (defined ...),
rearranging the lines to prevent excessive length.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Acked-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of using "light2" and "dark2" for class names in 'blame' view
(in place of "light" and "dark" classes in other places) to avoid
changing style on hover in 'blame' view while doing it for other views
(like 'shortlog'), use more advanced CSS, relying on the fact that
more specific selector wins.
While at it add a few comments to gitweb CSS file, and consolidate
some repeated info.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For example for "Junio C Hamano" initials would be "JH". Of course
initials are added (below shortened SHA-1 of blamed commit) only if
group of lines that blame the same commit has 2 or more lines in it.
Initials are extracted using i18n /\b([[:upper:]])\B/g regexp.
Additionally initials help to distinguish boundary commits, as they
use bold weight font too (in addition to shortened SHA-1 of commit).
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use "no-previous" class to mark blamed commits which do not have
"previous" header. Those are commits in which blamed file was created
(added); this includes boundary commits. This means that 'linenr'
link leads to blamed commit, not (one of) parent of blamed commit.
Therefore currently line number for such commit uses bold weight font
to denote this situation; the effect is subtle.
Use "multiple-previous" class in the opposite situation, where blamed
commit has multiple "previous" headers (is an evil merge). Currently
this class is not used for styling. In this situation 'linenr' link
leads to first of "previous" commits (first parent).
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Luben Tuikov changed 'lineno' link (line number link) from pointing to
'blame' view at given line at blamed commit, to the one at parent of
blamed commit in
244a70e (Blame "linenr" link jumps to previous state at
"orig_lineno", 2007-01-04).
This made it possible to do data mining using 'blame' view, by going
through history of a line using mentioned line number link.
Original implementation called "git rev-parse <commit>^" to find SHA-1
of a parent of a given commit once per each blamed line. In
39c19ce (gitweb: cache $parent_commit info in git_blame(),
2008-12-11)
this was improved so rev-parse was called once per each unique commit
in git-blame output. Alternate solution would be to relax validation
for 'hb' parameter by allowing extended SHA-1 syntax of the form
<rev>^ (perhaps redirecting to gitweb URL with <rev>^ resolved, in
practice moving call to rev-parse to 'the other side of link').
This solution had a bug that it didn't work for boundary commits.
Boundary commits don't have parents, so "git rev-parse <commit>^"
returned literal "<commit>^" (which didn't exists). Gitweb didn't
detect this situation and passed this result literally as 'hb'
parameter in 'linenr' link. Following such link currently gives
400 - Invalid hash base parameter
error; 'hb' parameter is restricted via validate_refname to correct
refnames and doesn't allow for extended SHA-1 syntax. This bug could
have been fixed alternatively by checking if commit is boundary commit,
or check if rev-parse result is unchanged (still ends in '^' prefix).
The solution employing rev-parse to find parent of commit had inherent
problem if blamed commit renamed file; then name of file would be
different in its parent. Solving this outside git-blame would be
difficult and costly (at least cost of additional fork for extra git
command).
Currently gitweb uses information in "previous" header, which was
introduced by Junio C Hamano in
96e1170 (blame: show "previous" information in
--porcelain/--incremental format, 2008-06-04)
This (currently undocumented) header has the following format:
"previous <sha1 of parent commit> <filename at parent>"
Using "previous" header solves both problem of performance and the
problem that blamed commit could have renaming blamed file.
Because "previous" header can be repeated for the same commit when
blamed commit is merge (has more than one parent), and we are
interested usually in _first_ parent, currently we store only first
value if blame header repeats. Using first parent (first "previous"
line) was what gitweb did before; without this change gitweb would use
last parent instead.
If there is no previous commit 'linenr' link points to blamed commit
and blamed filename, making it work correctly for boundary commits.
Acked-by: Luben Tuikov <ltuikov@yahoo.com>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use "boundary" class to mark boundary commits, which currently results
in using bold weight font for SHA-1 of a commit (to be more exact for
all text in the first cell in row, that contains SHA-1 of a commit).
Detecting boundary commits is done by watching for "boundary" header
in "git blame -p" output. Because this header doesn't carry
additional data the regular expression for blame header fields
had to be slightly adjusted.
With current gitweb API only root (parentless) commits can be boundary
commits.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Style for td.error was introduced in 1f1ab5f (gitweb: style done with
stylesheet, 2006-06-20) to replace inline style for errors in old
multi-column "git annotate" based 'blame' view. This view was then
since removed (replaced by "git-blame" based 'blame' view, with fewer
colums), making this style unused.
Make this style more generic by replacing td.error with .error to make
it apply to any element. It will be used in 'blame_incremental' view
to show error messages.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-scm.com is now the "official" Git project page, having taken over
from git.or.cz, so update the default link accordingly. This saves a
redirect when people hit git.or.cz.
Signed-off-by: Wincent Colaiuta <win@wincent.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* gb/gitweb-avatar:
gitweb: add empty alt text to avatar img
gitweb: picon avatar provider
gitweb: gravatar url cache
gitweb: (gr)avatar support
gitweb: use git_print_authorship_rows in 'tag' view too
gitweb: uniform author info for commit and commitdiff
gitweb: refactor author name insertion
The empty alt text optimizes screen estate in text-only browsers.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Simple implementation of picon that only relies on the indiana.edu
database.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Views which contain many occurrences of the same email address (e.g.
shortlog view) benefit from not having to recalculate the MD5 of the
email address every time.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce avatar support: the feature adds the appropriate img tag next
to author and committer in commit(diff), history, shortlog, log and tag
views. Multiple avatar providers are possible, but only gravatar is
implemented at the moment.
Gravatar support depends on Digest::MD5, which is a core package since
Perl 5.8. If gravatars are activated but Digest::MD5 cannot be found,
the feature will be automatically disabled.
No avatar provider is selected by default, except in the t9500 test.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
parse_tag must be adapted to use the hash keys expected by
git_print_authorship_rows. This is not a problem since git_tag is the
only user of this sub.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Switch from 'log'-like layout
A U Thor <email@example.com> [date time]
to 'commit'-like layout
author A U Thor <email@example.com>
date time
committer C O Mitter <other.email@example.com>
committer date time
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Collect all author display code in appropriate functions, making it
easier to extend these functions on the CGI side.
We also move some of the presentation code from hard-coded HTML to CSS,
for easier customization.
A side effect of the refactoring is that now localtime is always
displayed with the 'at night' warning.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When combining "dumb client" and human-friendly access by using the
'.git' extension to switch between the two, make sure the AliasMatch
covers the entire request. Without a full match, a request for
http://git.example.com/project/shortlog/branch..gitsomething
would result in a 404 because the server would try to access the
the project 'project/shortlog/branch.'
The solution is still not bulletproof, so document the possible failing
case.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jn/gitweb-cleanup:
gitweb: Remove unused $hash_base parameter from normalize_link_target
gitweb: Simplify snapshot format detection logic in evaluate_path_info
gitweb: Use capturing parentheses only when you intend to capture
gitweb: Replace wrongly added tabs with spaces
gitweb: Use block form of map/grep in a few cases more
gitweb: Always use three argument form of open
gitweb: Always use three argument form of open
gitweb: Do not use bareword filehandles
Replace control characters with question mark '?' (like in
chop_and_esc_str).
A little background: some web browsers turn on strict (and
unforgiving) XML validating mode for XHTML documents served using
application/xhtml+xml content type. This means among others that
control characters are forbidden to appear in gitweb output.
CGI.pm does by default slight escaping (using simple_escape subroutine
from CGI::Util) of all _attribute_ values (depending on the value of
autoEscape, by default on). This escaping, at least in CGI.pm version
3.10 (most current version at CPAN is 3.43), is minimal: only '"',
'&', '<' and '>' are escaped using named HTML entity references
(", &, < and > respectively). But simple_escape does
not do escaping of control characters such as ^X which are invalid in
XHTML (in strict mode).
If by some accident commit message do contain some control character
in first 50 characters (more or less) of first line of commit message,
and this line is longer than 50 characters (so gitweb shortens it for
display), then gitweb would put this control character in title
attribute (and CGI.pm would not remove them). The tag _contents_ is
safe because it is escaped using esc_html() explicitly, and it
replaces control characters by their printable representation.
While at it: chop_and_escape_str doesn't need capturing group.
Noticed-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
...since it was decided for normalize_link_target to only mangle
pathname, and do not try to check if target is present in $hash_base
tree, for performance reasons.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This issue was caught by perlcritic in harsh severity level noticing
that catch variable was used outside conditional thanks to the
Perl::Critic::Policy::RegularExpressions::ProhibitCaptureWithoutTest
policy. See "Perl Best Practices", chapter 12. Regular Expressions,
section 12.15. Captured Values:
Pattern matches that fail never assign anything to $1, $2, etc.,
nor do they leave those variables undefined. After an unsuccessful
pattern match, the numeric capture variables remain exactly as they
were before the match was attempted.
New version is in my opinion much easier to understand; previous
version worked correctly due to the fact that we returned from loop
on first found match.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Acked-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Non-capturing groups are useful because they have better runtime
performance and do not copy strings to the magic global capture
variables.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In two places there was hard tab character instead of space.
Fix this.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use block form of 'grep' i.e. 'grep {BLOCK} LIST' rather than
'grep(EXPR, LIST)' in filter_snapshot_fmts subroutine. This makes
code more readable, as expression is rather long, and statement above
there is 'map' with very similar expression also in the block form.
Remove unnecessary and misleading parentheses around block form 'map'
arguments in quote_command subroutine.
The inner "map" in format_snapshot_links was left alone, as it is not
clear whether adding parentheses or changing it into block form would
improve readibility and clarity of this code.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
From 94638fb6edf3ea693228c680a6a30271ccd77522 Mon Sep 17 00:00:00 2001
From: Jakub Narebski <jnareb@gmail.com>
Date: Mon, 11 May 2009 03:25:55 +0200
Subject: [PATCH] gitweb: Localize magic variable $/
Instead of undefining and then restoring magic variable $/ (input
record separator) for 'slurp mode', localize it.
While at it, state explicitely that "local $/;" makes it undefined, by
using explicit "local $/ = undef;".
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In most cases (except insert_file() subroutine) we used old two argument
form of 'open' to open files for reading. This can cause subtle bugs when
$projectroot or $projects_list file starts with mode characters ('>', '<',
'+<', '|', etc.) or with leading whitespace; and also when $projects_list
file or $mimetypes_file or ctags files end with trailing whitespace or '|'.
Additionally it is also more clear to explicitly state that we open those
files for reading.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
gitweb: Do not use bareword filehandles
The script was using bareword filehandles. This is considered a bad
practice so they have been changed to indirect filehandles.
Changes touch git_get_project_ctags and mimetype_guess_file;
while at it rename local variable from $mime to $mimetype (in
mimetype_guess_file) to better reflect its value (its contents).
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use of function prototypes is considered bad practice in Perl. The
ones used here didn't accomplish anything anyhow, so they've been
removed.
>From perlsub(1):
[...] the intent of this feature [prototypes] is primarily to let
you define subroutines that work like built-in functions [...]
you can generate new syntax with it [...]
We don't want to have subroutines behaving exactly like built-in
functions, we don't want to define new syntax / syntactic sugar, so
prototypes in gitweb are not needed... and they can have unintended
consequences.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix the detection of the requested snapshot format, which failed for
PATH_INFO URLs since the references to the hashes which describe the
supported snapshot formats weren't dereferenced appropriately.
Signed-off-by: Holger Weiß <holger@zedat.fu-berlin.de>
Acked-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current implementation only hyperlinks the first hash on
a given line of the commit message. It seems sensible to
highlight all of them if there are multiple, and it seems
plausible that there would be multiple even with a tidy line
length limit, because they can be abbreviated as short as 8
characters.
Benchmark:
I wanted to make sure that using the 'e' switch to the Perl regex
wasn't going to kill performance, since this is called once per commit
message line displayed.
In all three A/B scenarios I tried, the A and B yielded the same
results within 2%, where A is the version of code before this patch
and B is the version after.
1: View a commit message containing the last 1000 commit hashes
2: View a commit message containing 1000 lines of 40 dots to avoid
hyperlinking at the same message length
3: View a short merge commit message with a few lines of text and
no hashes
All were run in CGI mode on my sub-production hardware on a recent
clone of git.git. Numbers are the average of 10 reqests per second
with the first request discarded, since I expect this change to affect
primarily CPU usage. Measured with ApacheBench.
Note that the web page rendered was the same; while the new code
supports multiple hashes per line, there was at most one per line.
The primary purpose of scenarios 2 and 3 were to verify that the
addition of 1000 commit messages had an impact on how much of the time
was spent rendering commit messages. They were all within 2% of 0.80
requests per second (much faster).
So I think the patch has no noticeable effect on performance.
Signed-off-by: Marcel M. Cary <marcel@oak.homeunix.org>
Acked-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a feature like "blame" is permitted to be overridden in the
repository configuration but it is not actually set in the repository,
a warning is emitted due to the undefined value of the repository
configuration, even though it's a perfectly normal condition.
Emitting warning is grounds for test failure in the gitweb test
script.
This error was caused by rewrite of git_get_project_config from using
"git config [<type>] <name>" for each individual configuration
variable checked to parsing "git config --list --null" output in
commit b201927 (gitweb: Read repo config using 'git config -z -l').
Earlier version of git_get_project_config was returning empty string
if variable do not exist in config; newer version is meant to return
undef in this case, therefore change in feature_bool was needed.
Additionally config_to_* subroutines were meant to be invoked only if
configuration variable exists; therefore we added early return to
git_get_project_config: it now returns no value if variable does not
exists in config. Otherwise config_to_* subroutines (config_to_bool
in paryicular) wouldn't be able to distinguish between the case where
variable does not exist and the case where variable doesn't have value
(the "[section] noval" case, which evaluates to true for boolean).
While at it fix bug in config_to_bool, where checking if $val is
defined (if config variable has value) was done _after_ stripping
leading and trailing whitespace, which lead to 'Use of uninitialized
value' warning.
Add test case for features overridable but not overriden in repo
config, and case for no value boolean configuration variable.
Signed-off-by: Marcel M. Cary <marcel@oak.homeunix.org>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
CGI::url() has some issues when rebuilding the script URL if the script
is a DirectoryIndex.
One of these issue is the inability to strip PATH_INFO, which is why
we had to do it ourselves.
Another issue is that the resulting URL cannot be used for the <base>
tag: it works if we're the DirectoryIndex at the root level, but not
otherwise.
We fix this by building the proper base URL ourselves, and improve the
comment about the need to strip PATH_INFO manually while we're at it.
Additionally t/t9500-gitweb-standalone-no-errors.sh had to be modified
to set SCRIPT_NAME variable (CGI standard states that it MUST be set,
and now gitweb uses it if PATH_INFO is not empty, as is the case for
some of tests in t9500).
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a gitweb configuration variable $prevent_xss that disables features
to prevent content in repositories from launching cross-site scripting
(XSS) attacks in the gitweb domain. Currently, this option makes gitweb
ignore README.html (a better solution may be worked out in the future)
and serve a blob_plain file of an untrusted type with
"Content-Disposition: attachment", which tells the browser not to show
the file at its original URL.
The XSS prevention is currently off by default.
Signed-off-by: Matt McCutchen <matt@mattmccutchen.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
