"commit -s" used to add an empty line before adding S-o-b line only when
the last line of the existing log message is not another S-o-b line, but
c1e01b0 (commit: More generous accepting of RFC-2822 footer lines.,
2009-10-28) introduced logic to omit this empty line when the message ends
with a run of "footer" lines, to cover S-o-b's friends, e.g. Acked-by.
However, the logic was overzealous and missed one corner case. A message
that consists of a single line that begins with Token + colon, it can be
mistaken as a S-o-b's friend. We do want an empty line in such a case.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git commit -s' will insert a blank line before the Signed-off-by
line at the end of the message, unless this last line is a
Signed-off-by line itself. Common use has other trailing lines
at the ends of commit text, in the style of RFC2822 headers.
Be more generous in considering lines to be part of this footer.
If the last paragraph of the commit message reasonably resembles
RFC-2822 formatted lines, don't insert that blank line.
The new Signed-off-by line is still only suppressed when the
author's existing Signed-off-by is the last line of the message.
Signed-off-by: David Brown <davidb@quicinc.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
So complete refs, files after the double-dash and some diff options that
make sense for difftool.
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Complete all long options for 'git rebase' except --no-verify
(probably used very seldom) and the long options corresponding
to -v, -q, and -f.
Signed-off-by: Björn Gustavsson <bgustavsson@gmail.com>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* git://git.bogomips.org/git-svn:
git-svn: convert SVN 1.5+ / svnmerge.py svn:mergeinfo props to parents
git-svn: add test data for SVN 1.5+ merge, with script.
git-svn: convert SVK merge tickets to extra parents
git-svn: allow test setup script to support PERL env. var
git-svn: add test data for SVK merge, with script.
git svn: fix fetch where glob is on the top-level URL
* git://repo.or.cz/git-gui:
git-gui: adjust the minimum height of diff pane for shorter screen height
git-gui: fix use of uninitialized variable
git-gui: store wm state and fix wm geometry
git-gui: Ensure submodule path is quoted properly
git-gui: fix diff for partially staged submodule changes
git-gui: Update russian translation
git-gui: Limit display to a maximum number of files
git-gui: remove warning when deleting correctly merged remote branch
git-gui: Added Greek translation & glossary
git-gui: display summary when showing diff of a submodule
When the main window is maximized, if the screen height is shorter (e.g.
Netbook screen 1024x600), both the partial commit pane and the status bar
are hidden. The diff pane is resizable, so that it can use less vertical
height, allowing the overall window to be shorter and still display both
the entire commit pane and status bar.
Signed-off-by: Vietor Liu <vietor@vxwo.org>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
This feature is long overdue; convert SVN's merge representation to git's
as revisions are imported. This works by converting the list of revisions
in each line of the svn:mergeinfo into git revision ranges, and then
checking the latest of each of these revision ranges for A) being new and
B) now being completely merged.
Signed-off-by: Sam Vilain <sam.vilain@catalyst.net.nz>
Acked-by: Eric Wong <normalperson@yhbt.net>
Dump generated with SVN 1.5.1 (on lenny amd64). This test
should hopefully cover all but a few intermediate versions of
the svnmerge.py script.
Signed-off-by: Sam Vilain <sam.vilain@catalyst.net.nz>
Acked-by: Eric Wong <normalperson@yhbt.net>
SVK is a simple case to start with, as its idea of merge parents
matches git's one. When a svk:merge ticket is encountered, check each
of the listed merged revisions to see if they are in the history of
this commit; if not, then we have encountered a merge - record it.
[ew: minor formatting cleanups]
Signed-off-by: Sam Vilain <sam.vilain@catalyst.net.nz>
Acked-by: Eric Wong <normalperson@yhbt.net>
Possibly the 'perl' in the PATH is not the one to be used for the tests;
let PERL set in the environment select it.
Signed-off-by: Sam Vilain <sam.vilain@catalyst.net.nz>
Acked-by: Eric Wong <normalperson@yhbt.net>
Dump generated with SVK 2.0.2 and SVN 1.5.1 (on lenny amd64).
Signed-off-by: Sam Vilain <sam.vilain@catalyst.net.nz>
Acked-by: Eric Wong <normalperson@yhbt.net>
In cases where the top-level URL we're tracking is the path we
glob against, we can once again track odd repositories that keep
branches/tags at the top level. This regression was introduced
in commit 6f5748e14c.
Thanks to Daniel Cordero for the original bug report and
bisection.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
* jc/receive-pack-auto:
receive-pack: run "gc --auto --quiet" and optionally "update-server-info"
gc --auto --quiet: make the notice a bit less verboase
GIT_DIFFTOOL_PROMPT doesn't have any effect if overridden with --prompt.
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The first argument of the tar command is interpreted as a bundle of
letters specifying the mode of operation and additional options, with
any option arguments taken from subsequent words on the command line
as needed. The implementation of tar in busybox treats this bundle
as if preceded by a dash and then parses it by getopt rules, which
mishandles 'tar xfo -'. Use 'tar xof -' instead to work this around.
Signed-off-by: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This fixes a regression introduce by d68dc34 (git-describe: Die early if
there are no possible descriptions, 2009-08-06).
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The loop in get_size_from_delta() feeds a deflated delta data from the
pack stream _until_ we get inflated result of 20 bytes[*] or we reach the
end of stream.
Side note. This magic number 20 does not have anything to do with the
size of the hash we use, but comes from 1a3b55c (reduce delta head
inflated size, 2006-10-18).
The loop reads like this:
do {
in = use_pack();
stream.next_in = in;
st = git_inflate(&stream, Z_FINISH);
curpos += stream.next_in - in;
} while ((st == Z_OK || st == Z_BUF_ERROR) &&
stream.total_out < sizeof(delta_head));
This git_inflate() can return:
- Z_STREAM_END, if use_pack() fed it enough input and the delta itself
was smaller than 20 bytes;
- Z_OK, when some progress has been made;
- Z_BUF_ERROR, if no progress is possible, because we either ran out of
input (due to corrupt pack), or we ran out of output before we saw the
end of the stream.
The fix b3118bd (sha1_file: Fix infinite loop when pack is corrupted,
2009-10-14) attempted was against a corruption that appears to be a valid
stream that produces a result larger than the output buffer, but we are
not even trying to read the stream to the end in this loop. If avail_out
becomes zero, total_out will be the same as sizeof(delta_head) so the loop
will terminate without the "fix". There is no fix from b3118bd needed for
this loop, in other words.
The loop in unpack_compressed_entry() is quite a different story. It
feeds a deflated stream (either delta or base) and allows the stream to
produce output up to what we expect but no more.
do {
in = use_pack();
stream.next_in = in;
st = git_inflate(&stream, Z_FINISH);
curpos += stream.next_in - in;
} while (st == Z_OK || st == Z_BUF_ERROR)
This _does_ risk falling into an endless interation, as we can exhaust
avail_out if the length we expect is smaller than what the stream wants to
produce (due to pack corruption). In such a case, avail_out will become
zero and inflate() will return Z_BUF_ERROR, while avail_in may (or may
not) be zero.
But this is not a right fix:
do {
in = use_pack();
stream.next_in = in;
st = git_inflate(&stream, Z_FINISH);
+ if (st == Z_BUF_ERROR && (stream.avail_in || !stream.avail_out)
+ break; /* wants more input??? */
curpos += stream.next_in - in;
} while (st == Z_OK || st == Z_BUF_ERROR)
as Z_BUF_ERROR from inflate() may be telling us that avail_in has also run
out before reading the end of stream marker. In such a case, both avail_in
and avail_out would be zero, and the loop should iterate to allow the end
of stream marker to be seen by inflate from the input stream.
The right fix for this loop is likely to be to increment the initial
avail_out by one (we allocate one extra byte to terminate it with NUL
anyway, so there is no risk to overrun the buffer), and break out if we
see that avail_out has become zero, in order to detect that the stream
wants to produce more than what we expect. After the loop, we have a
check that exactly tests this condition:
if ((st != Z_STREAM_END) || stream.total_out != size) {
free(buffer);
return NULL;
}
So here is a patch (without my previous botched attempts) to fix this
issue. The first hunk reverts the corresponding hunk from b3118bd, and
the second hunk is the same fix proposed earlier.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add the missing definite article ("the") in several places.
Change "note to..." to "note for...", since "note to" means that
that the note is addressed to someone (source: Google search).
Change "progressbar" to "progress bar" (source: Wikipedia).
Format git commands, options, and file names consistently using
back quotes (i.e. a fixed font in the resulting HTML document).
Signed-off-by: Björn Gustavsson <bgustavsson@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Also handle the extensions .tlz and .txz, aliases for .tar.lzma and
.tar.xz respectively.
Signed-off-by: Ingmar Vanhassel <ingmar@exherbo.org>
Liked-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce two new configuration variables, receive.autogc (defaults to
true) and receive.updateserverinfo (defaults to false). When these are
set, receive-pack runs "gc --auto --quiet" and "update-server-info"
respectively after it finishes receiving data from "git push" and updating
refs.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Acked-by: Nicolas Pitre <nico@fluxnic.net>
When "gc --auto --quiet" decides there is something to do, it tells the
user what it is doing, as it is going to make the user wait for a bit.
But the message was a bit too long.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This enables gitk to show the patch text with correct glyphs if the locale
is not UTF-8.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This mbox file must have been added by accident in e9fe804 (git-mailinfo:
Fix getting the subject from the in-body [PATCH] line, 2008-07-14).
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Linus and other git developers from the early days trained their fingers
to type the command, every once in a while even without thinking, to check
the consistency of the repository back when the lower core part of the git
was still being developed. Developers who wanted to make sure that git
correctly dealt with packfiles could deliberately trigger their creation
and checked them after they were created carefully, but loose objects are
the ones that are written by various commands from random codepaths. It
made some technical sense to have a mode that checked only loose objects
from the debugging point of view for that reason.
Even for git developers, there no longer is any reason to type "git fsck"
every five minutes these days, worried that some newly created objects
might be corrupt due to recent change to git.
The reason we did not make "--full" the default is probably we trust our
filesystems a bit too much. At least, we trusted filesystems more than we
trusted the lower core part of git that was under development.
Once a packfile is created and we always use it read-only, there didn't
seem to be much point in suspecting that the underlying filesystems or
disks may corrupt them in such a way that is not caught by the SHA-1
checksum over the entire packfile and per object checksum. That trust in
the filesystems might have been a good tradeoff between fsck performance
and reliability on platforms git was initially developed on and for, but
it may not be true anymore as we run on many more platforms these days.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's nice to search for an author by merely clicking on their name in
gitweb. This is usually faster than selecting the name, copying the
selection, pasting it into the search box, selecting between
author/committer and then hitting enter.
Linkify the avatar icon in log/shortlog view because the icon is directly
adjacent to the name and thus more related. The same is not true
when in commit/tag view where the icon is farther away.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
