The default_reflog parameter of create_autostash() is passed to
reset_head(). However as creating a stash does not involve updating
any refs the parameter is not used by reset_head(). Removing the
parameter from create_autostash() simplifies the callers.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This parameter is only needed when a ref is going to be updated and
the caller does not pass an explicit reflog message. Callers that are
only discarding uncommitted changes in the working tree such as such
as "rebase --skip" or create_autostash() do not update any refs so
should not have to worry about passing this parameter.
This change is not intended to have any user visible changes. The
pointer comparison between `oid` and `&head_oid` checks that the
caller did not pass an oid to be checked out. As no callers pass
RESET_HEAD_RUN_POST_CHECKOUT_HOOK without passing an oid there are
no changes to when the post-checkout hook is run. As update_ref() only
updates the ref if the oid passed to it differs from the current ref
there are no changes to when HEAD is updated.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The only use of the action parameter is to setup the error messages
for unpack_trees(). All but two cases pass either "checkout" or
"reset". The case that passes "reset --hard" would be better passing
"reset" so that the error messages match the builtin reset command
like all the other callers that are doing a reset. The case that
passes "Fast-forwarded" is only updating HEAD and so the parameter is
unused in that case as it does not call unpack_trees(). The value to
pass to setup_unpack_trees_porcelain() can be determined by checking
whether flags contains RESET_HEAD_HARD without the caller having to
specify it.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This code is heavily indented and it will be convenient later in the
series to have it in its own function.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In commits bc3ae46b42 ("rebase: do not attempt to remove
startup_info->original_cwd", 2021-12-09) and 0fce211ccc ("stash: do not
attempt to remove startup_info->original_cwd", 2021-12-09), we wanted to
allow the subprocess to know which directory the parent process was
running from, so that the subprocess could protect it. However...
When run from a non-main worktree, setup_git_directory() will note
that the discovered git directory
(/PATH/TO/.git/worktree/non-main-worktree) does not match
DEFAULT_GIT_DIR_ENVIRONMENT (see setup_discovered_git_dir()), and
decide to set GIT_DIR in the environment. This matters because...
Whenever git is run with the GIT_DIR environment variable set, and
GIT_WORK_TREE not set, it presumes that '.' is the working tree. So...
This combination results in the subcommand being very confused about
the working tree. Fix it by also setting the GIT_WORK_TREE environment
variable along with setting cmd.dir.
A possibly more involved fix we could consider for later would be to
make setup.c set GIT_WORK_TREE whenever (a) it discovers both the git
directory and the working tree and (b) it decides to set GIT_DIR in the
environment. I did not attempt that here as such would be too big of a
change for a 2.35.1 release.
Test-case-by: Glen Choo <chooglen@google.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When cloning a branchless and tagless but not refless remote using
protocol v0 or v1, Git calls transport_fetch_refs() with an empty ref
list. This makes the clone fail with the message "remote transport
reported error".
Git should have refrained from calling transport_fetch_refs(), just like
it does in the case that the remote is refless. Therefore, teach Git to
do this.
In protocol v2, this does not happen because the client passes
ref-prefix arguments that filter out non-branches and non-tags in the
ref advertisement, making the remote appear empty.
Note that this bug concerns logic in builtin/clone.c and only affects
cloning, not fetching.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We added an unrelated sanity checking that leads to a BUG() while
plugging a leak, which triggered in a repository with symrefs in
the local branch namespace that point at a ref outside. Partially
revert the change to avoid triggering the BUG().
* ab/checkout-branch-info-leakfix:
checkout: avoid BUG() when hitting a broken repository
When 9081a421 (checkout: fix "branch info" memory leaks, 2021-11-16)
cleaned up existing memory leaks, we added an unrelated sanity check
to ensure that a local branch is truly local and not a symref to
elsewhere that dies with BUG() otherwise. This was misguided in two
ways. First of all, such a tightening did not belong to a leak-fix
patch. And the condition it detected was *not* a bug in our program
but a problem in user data, where warning() or die() would have been
more appropriate.
As the condition is not fatal (the result of computing the local
branch name in the code that is involved in the faulty check is only
used as a textual label for the commit), let's revert the code to
the original state, i.e. strip "refs/heads/" to compute the local
branch name if possible, and otherwise leave it NULL. The consumer
of the information in merge_working_tree() is prepared to see NULL
in there and act accordingly.
cf. https://bugzilla.redhat.com/show_bug.cgi?id=2042920
Reported-by: Petr Šplíchal <psplicha@redhat.com>
Reported-by: Todd Zullinger <tmz@pobox.com>
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There were two commit_lists created in cmd_merge() that were only
conditionally free()'d. Add a quick conditional call to
free_commit_list() for each of them at the end of the function.
Testing this commit against t6404 under valgrind shows that this patch
fixes the following two leaks:
16 bytes in 1 blocks are definitely lost in loss record 16 of 126
at 0x484086F: malloc (vg_replace_malloc.c:380)
by 0x69FFEB: do_xmalloc (wrapper.c:41)
by 0x6A0073: xmalloc (wrapper.c:62)
by 0x52A72D: commit_list_insert (commit.c:556)
by 0x47FC93: reduce_parents (merge.c:1114)
by 0x4801EE: collect_parents (merge.c:1214)
by 0x480B56: cmd_merge (merge.c:1465)
by 0x40686E: run_builtin (git.c:464)
by 0x406C51: handle_builtin (git.c:716)
by 0x406E96: run_argv (git.c:783)
by 0x40730A: cmd_main (git.c:914)
by 0x4E7DFA: main (common-main.c:56)
8 (16 direct, 32 indirect) bytes in 1 blocks are definitely lost in \
loss record 61 of 126
at 0x484086F: malloc (vg_replace_malloc.c:380)
by 0x69FFEB: do_xmalloc (wrapper.c:41)
by 0x6A0073: xmalloc (wrapper.c:62)
by 0x52A72D: commit_list_insert (commit.c:556)
by 0x52A8F2: commit_list_insert_by_date (commit.c:620)
by 0x5270AC: get_merge_bases_many_0 (commit-reach.c:413)
by 0x52716C: repo_get_merge_bases (commit-reach.c:438)
by 0x480E5A: cmd_merge (merge.c:1520)
by 0x40686E: run_builtin (git.c:464)
by 0x406C51: handle_builtin (git.c:716)
by 0x406E96: run_argv (git.c:783)
by 0x40730A: cmd_main (git.c:914)
There are still 3 leaks in chdir_notify_register() after this, but
chdir_notify_register() has been brought up on the list before and folks
were not a fan of fixing those, so I'm not touching them.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When creating the sparse-checkout file, Git does not create the leading
directory, "$GIT_DIR/info", if it does not exist. This causes problems
if the repository does not have that directory. Therefore, ensure that
the leading directory is created.
This is the only "open" in builtin/sparse-checkout.c that does not have
a leading directory check. (The other one in write_patterns_and_update()
does.)
Note that the test needs to explicitly specify a template when running
"git init" because the default template used in the tests has the
"info/" directory included.
Helped-by: Jose Lopes <jabolopes@google.com>
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git branch -h" incorrectly said "--track[=direct|inherit]",
implying that "--trackinherit" is a valid option, which has been
corrected.
source: <3de40324bea6a1dd9bca2654721471e3809e87d8.1642538935.git.steadmon@google.com>
source: <c3c26192-aee9-185a-e559-b8735139e49c@web.de>
* js/branch-track-inherit:
branch,checkout: fix --track documentation
Follow the example set by 12909b6b (i18n: turn "options are
incompatible" into "cannot be used together", 2022-01-05) and use
the same message string to reduce the need for translation.
Reported-by: Jiang Xin <worldhello.net@gmail.com>
Helped-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Document that the accepted variants of the --track option are --track,
--track=direct, and --track=inherit. The equal sign in the latter two
cannot be replaced with whitespace; in general optional arguments need
to be attached firmly to their option.
Put "direct" consistently before "inherit", if only for the reasons
that the former is the default, explained first in the documentation,
and comes before the latter alphabetically.
Mention both modes in the short help so that readers don't have to look
them up in the full documentation. They are literal strings and thus
untranslatable. PARSE_OPT_LITERAL_ARGHELP is inferred due to the pipe
and parenthesis characters, so we don't have to provide that flag
explicitly.
Mention that -t has the same effect as --track and --track=direct.
There is no way to specify inherit mode using the short option, because
short options generally don't accept optional arguments.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
`git fetch --negotiate-only` is an implementation detail of push
negotiation and, unlike most `git fetch` invocations, does not actually
update the main repository. Thus it should not update submodules even
if submodule recursion is enabled.
This is not just slow, it is wrong e.g. push negotiation with
"submodule.recurse=true" will cause submodules to be updated because it
invokes `git fetch --negotiate-only`.
Fix this by disabling submodule recursion if --negotiate-only was given.
Since this makes --negotiate-only and --recurse-submodules incompatible,
check for this invalid combination and die.
This does not use the "goto cleanup" introduced in the previous commit
because we want to recurse through submodules whenever a ref is fetched,
and this can happen without introducing new objects.
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
cmd_fetch() does the following with the assumption that objects are
fetched:
* Run gc
* Write commit graphs (if enabled by fetch.writeCommitGraph=true)
However, neither of these tasks makes sense if objects are not fetched
e.g. `git fetch --negotiate-only` never fetches objects.
Speed up cmd_fetch() by bailing out early if we know for certain that
objects will not be fetched. cmd_fetch() can bail out early whenever
objects are not fetched, but for now this only considers
--negotiate-only.
The same optimization does not apply to `git fetch --dry-run` because
that actually fetches objects; the dry run refers to not updating refs.
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Replace an early return with 'goto cleanup' in cmd_fetch() so that the
string_list is always cleared (the string_list_clear() call is purely
cleanup; the string_list is not reused). This makes cleanup consistent
so that a subsequent commit can use 'goto cleanup' to bail out early.
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git branch -h" incorrectly said "--track[=direct|inherit]",
implying that "--trackinherit" is a valid option, which has been
corrected.
* js/branch-track-inherit:
branch,checkout: fix --track usage strings
As Ævar pointed out in [1], the use of PARSE_OPT_LITERAL_ARGHELP with a
list of allowed parameters is not recommended. Both git-branch and
git-checkout were changed in d311566 (branch: add flags and config to
inherit tracking, 2021-12-20) to use this discouraged combination for
their --track flags.
Fix this by removing PARSE_OPT_LITERAL_ARGHELP, and changing the arghelp
to simply be "mode". Users may discover allowed values in the manual
pages.
[1]: https://lore.kernel.org/git/220111.86a6g3yqf9.gmgdl@evledraar.gmail.com/
Signed-off-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"pull --rebase" internally uses the merge machinery when the other
history is a descendant of ours (i.e. perform fast-forward). This
came from [1], where the discussion was started from a feature
request to do so. It is a bit hard to read the rationale behind it
in the discussion, but it seems that it was an established fact for
everybody involved that does not even need to be mentioned that
fast-forwarding done with "rebase" was much undesirable than done
with "merge", and more importantly, the result left by "merge" is as
good as (or better than) that by "rebase".
Except for one thing. Because "git merge" does not (and should not)
honor rebase.autostash, "git pull" needs to read it and forward it
when we use "git merge" as a (hopefully better) substitute for "git
rebase" during the fast-forwarding. But we forgot to do so (we only
add "--[no-]autostash" to the "git merge" command when "git pull" itself
was invoked with "--[no-]autostash" command line option.
Make sure "git merge" is run with "--autostash" when
rebase.autostash is set and used to fast-forward the history on
behalf of "git rebase". Incidentally this change also takes care of
the case where
- "git pull --rebase" (without other command line options) is run
- "rebase.autostash" is not set
- The history fast-forwards
In such a case, "git merge" is run with an explicit "--no-autostash"
to prevent it from honoring merge.autostash configuration, which is
what we want. After all, we want the "git merge" to pretend as if
it is "git rebase" while being used for this purpose.
[1] https://lore.kernel.org/git/xmqqa8cfbkeq.fsf_-_@gitster.mtv.corp.google.com/
Reported-by: Tilman Vogel <tilman.vogel@web.de>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Replace unconditional index expansion in 'do_reupdate()' with one scoped to
only where a full index is needed. A full index is only required in
'do_reupdate()' when a sparse directory in the index differs from HEAD; in
that case, the index is expanded and the operation restarted.
Because the index should only be expanded if a sparse directory is modified,
add a test ensuring the index is not expanded when differences only exist
within the sparse cone.
Signed-off-by: Victoria Dye <vdye@github.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Enable use of the sparse index with `update-index`. Most variations of
`update-index` work without explicitly expanding the index or making any
other updates in or outside of `update-index.c`.
The one usage requiring additional changes is `--cacheinfo`; if a file
inside a sparse directory was specified, the index would not be expanded
until after the cache tree is invalidated, leading to a mismatch between the
index and cache tree. This scenario is handled by rearranging
`add_index_entry_with_check`, allowing `index_name_stage_pos` to expand the
index *before* attempting to invalidate the relevant cache tree path,
avoiding cache tree/index corruption.
Signed-off-by: Victoria Dye <vdye@github.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add repository settings to allow usage of the sparse index.
When using the `--all` option, sparse directories are ignored by default due
to the `skip-worktree` flag, so there is no need to expand the index. If
`--ignore-skip-worktree-bits` is specified, the index is expanded in order
to check out all files.
When checking out individual files, existing behavior in a full index is to
exit with an error if a directory is specified (as the directory name will
not match an index entry). However, it is possible in a sparse index to
match a directory name to a sparse directory index entry, but checking out
that sparse directory still results in an error on checkout. To reduce some
potential confusion for users, `checkout_file(...)` explicitly exits with an
informative error if provided with a sparse directory name. The test
corresponding to this scenario verifies the error message, which now differs
between sparse index and non-sparse index checkouts.
Signed-off-by: Victoria Dye <vdye@github.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update `checkout-index` to no longer refresh files that have the
`skip-worktree` bit set, exiting with an error if `skip-worktree` filenames
are directly provided to `checkout-index`. The newly-added
`--ignore-skip-worktree-bits` option provides a mechanism to replicate the
old behavior, checking out *all* files specified (even those with
`skip-worktree` enabled).
The ability to toggle whether files should be checked-out based on
`skip-worktree` already exists in `git checkout` and `git restore` (both of
which have an `--ignore-skip-worktree-bits` option). The change to, by
default, ignore `skip-worktree` files is especially helpful for
sparse-checkout; it prevents inadvertent creation of files outside the
sparse definition on disk and eliminates the need to expand a sparse index
when using the `--all` option.
Internal usage of `checkout-index` in `git stash` and `git filter-branch` do
not make explicit use of files with `skip-worktree` enabled, so
`--ignore-skip-worktree-bits` is not added to them.
Helped-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Victoria Dye <vdye@github.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove full index requirement for `git clean` and test to ensure the index
is not expanded in `git clean`. Add to existing test for `git clean` to
verify cleanup of untracked files in sparse directories is consistent
between sparse index and non-sparse index checkouts.
Signed-off-by: Victoria Dye <vdye@github.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rearrange conditions in method determining whether index expansion is
necessary when a pathspec is specified for `git reset`, placing less
expensive condition first. Additionally, add details & examples to related
code comments to help with readability.
Helped-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Victoria Dye <vdye@github.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some lockfile code called free() in signal-death code path, which
has been corrected.
* ps/lockfile-cleanup-fix:
fetch: fix deadlock when cleaning up lockfiles in async signals
Fix a typo in my recent 03dc51fe849 (cat-file: fix remaining usage
bugs, 2021-10-09).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix up whitespace issues around "(... | ...)" in the SYNOPSIS and
usage. These were introduced in ab/cat-file series. See
e145efa6059 (Merge branch 'ab/cat-file' into next, 2022-01-05). In
particular 57d6a1cf96, 5a40417876 and 97fe725075 in that series.
We'll now correctly emit this usage output:
$ git cat-file -h
usage: git cat-file <type> <object>
or: git cat-file (-e | -p) <object>
or: git cat-file (-t | -s) [--allow-unknown-type] <object>
[...]
Before this the last line of that would be inconsistent with the
preceding "(-e | -p)":
or: git cat-file ( -t | -s ) [--allow-unknown-type] <object>
Reported-by: Jiang Xin <worldhello.net@gmail.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Switching out manual arg parsing for the parse-options API for the
expire and delete subcommands.
Move explicit_expiry flag into cmd_reflog_expire_cb struct so callbacks
can set both the value of the timestamp as well as the explicit_expiry
flag.
Signed-off-by: "John Cai" <johncai86@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git stash apply" forgot to attempt restoring untracked files when
it failed to restore changes to tracked ones.
* en/stash-df-fix:
stash: do not return before restoring untracked files
Similar message templates have been consolidated so that
translators need to work on fewer number of messages.
* ja/i18n-similar-messages:
i18n: turn even more messages into "cannot be used together" ones
i18n: ref-filter: factorize "%(foo) atom used without %(bar) atom"
i18n: factorize "--foo outside a repository"
i18n: refactor "unrecognized %(foo) argument" strings
i18n: factorize "no directory given for --foo"
i18n: factorize "--foo requires --bar" and the like
i18n: tag.c factorize i18n strings
i18n: standardize "cannot open" and "cannot read"
i18n: turn "options are incompatible" into "cannot be used together"
i18n: refactor "%s, %s and %s are mutually exclusive"
i18n: refactor "foo and bar are mutually exclusive"
"git -c branch.autosetupmerge=inherit branch new old" makes "new"
to have the same upstream as the "old" branch, instead of marking
"old" itself as its upstream.
* js/branch-track-inherit:
config: require lowercase for branch.*.autosetupmerge
branch: add flags and config to inherit tracking
branch: accept multiple upstream branches for tracking
Code clean-up to hide vreportf() from public API.
* ab/usage-die-message:
config API: use get_error_routine(), not vreportf()
usage.c + gc: add and use a die_message_errno()
gc: return from cmd_gc(), don't call exit()
usage.c API users: use die_message() for error() + exit 128
usage.c API users: use die_message() for "fatal :" + exit 128
usage.c: add a die_message() routine
Code refactoring in the reflog part of refs API.
* ab/reflog-prep:
reflog + refs-backend: move "verbose" out of the backend
refs files-backend: assume cb->newlog if !EXPIRE_REFLOGS_DRY_RUN
reflog: reduce scope of "struct rev_info"
reflog expire: don't use lookup_commit_reference_gently()
reflog expire: refactor & use "tip_commit" only for UE_NORMAL
reflog expire: use "switch" over enum values
reflog: change one->many worktree->refnames to use a string_list
reflog expire: narrow scope of "cb" in cmd_reflog_expire()
reflog delete: narrow scope of "cmd" passed to count_reflog_ent()
"git stash" by default triggers its "push" action, but its
implementation also made "git stash -h" to show short help only for
"git stash push", which has been corrected.
* ab/do-not-limit-stash-help-to-push:
stash: don't show "git stash push" usage on bad "git stash" usage
"git fetch" and "git pull" are now declared sparse-index clean.
Also "git ls-files" learns the "--sparse" option to help debugging.
* ds/fetch-pull-with-sparse-index:
test-read-cache: remove --table, --expand options
t1091/t3705: remove 'test-tool read-cache --table'
t1092: replace 'read-cache --table' with 'ls-files --sparse'
ls-files: add --sparse option
fetch/pull: use the sparse index
Use of certain "git rev-list" options with "git fast-export"
created nonsense results (the worst two of which being "--reverse"
and "--invert-grep --grep=<foo>"). The use of "--first-parent" is
made to behave a bit more sensible than before.
* ws/fast-export-with-revision-options:
fast-export: fix surprising behavior with --first-parent
Certain sparse-checkout patterns that are valid in non-cone mode
led to segfault in cone mode, which has been corrected.
* ds/sparse-checkout-malformed-pattern-fix:
sparse-checkout: refuse to add to bad patterns
sparse-checkout: fix OOM error with mixed patterns
sparse-checkout: fix segfault on malformed patterns
Using a buffer limited to 2048 is unnecessarily limiting. Switch to
using a string buffer to read in stdin for annotation.
Signed-off-by: "John Cai" <johncai86@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce a --annotate-stdin that is functionally equivalent of --stdin.
--stdin does not behave as --stdin in other subcommands, such as
pack-objects whereby it takes one argument per line. Since --stdin can
be a confusing and misleading name, rename it to --annotate-stdin.
This change adds a warning to --stdin warning that it will be removed in
the future.
Signed-off-by: "John Cai" <johncai86@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the push-to-checkout hook away from run-command.h to and over to
the new hook.h library.
This removes the last direct user of run_hook_le(), so we could remove
that function now, but let's leave that to a follow-up cleanup commit.
Signed-off-by: Emily Shaffer <emilyshaffer@google.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Emily Shaffer <emilyshaffer@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For certain one-shot hooks we'd like to optimistically run them, and
not complain if they don't exist.
This was already supported by the underlying hook.c library, but had
not been exposed via "git hook run". The command version of this will
be used by send-email in a subsequent commit.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Emily Shaffer <emilyshaffer@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the running of the 'post-checkout' hook away from run-command.h
to the new hook.h library in builtin/worktree.c. For this special case
we need a change to the hook API to teach it to run the hook from a
given directory.
We cannot skip the "absolute_path" flag and just check if "dir" is
specified as we'd then fail to find our hook in the new dir we'd
chdir() to. We currently don't have a use-case for running a hook not
in our "base" repository at a given absolute path, so let's have "dir"
imply absolute_path(find_hook(hook_name)).
Signed-off-by: Emily Shaffer <emilyshaffer@google.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Emily Shaffer <emilyshaffer@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the running of the 'post-checkout' hook away from run-command.h
to the new hook.h library, except in the case of
builtin/worktree.c. That special-case will be handled in a subsequent
commit.
Signed-off-by: Emily Shaffer <emilyshaffer@google.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Emily Shaffer <emilyshaffer@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach post-merge to use the hook.h library instead of the
run-command.h library to run hooks.
Signed-off-by: Emily Shaffer <emilyshaffer@google.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Emily Shaffer <emilyshaffer@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach applypatch-msg to use the hook.h library instead of the
run-command.h library.
Signed-off-by: Emily Shaffer <emilyshaffer@google.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Emily Shaffer <emilyshaffer@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the pre-rebase hook away from run-command.h to and over to the
new hook.h library.
Since this hook needs arguments introduce a run_hooksl() wrapper, like
run_hooks(), but it takes varargs.
Signed-off-by: Emily Shaffer <emilyshaffer@google.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Emily Shaffer <emilyshaffer@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach pre-applypatch and post-applypatch to use the hook.h library
instead of the run-command.h library.
Signed-off-by: Emily Shaffer <emilyshaffer@google.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Emily Shaffer <emilyshaffer@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the pre-auto-gc hook away from run-command.h to and over to the
new hook.h library. This uses the new run_hooks() wrapper.
Signed-off-by: Emily Shaffer <emilyshaffer@google.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Emily Shaffer <emilyshaffer@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In order to enable hooks to be run as an external process, by a
standalone Git command, or by tools which wrap Git, provide an external
means to run all configured hook commands for a given hook event.
Most of our hooks require more complex functionality than this, but
let's start with the bare minimum required to support our simplest
hooks.
In terms of implementation the usage_with_options() and "goto usage"
pattern here mirrors that of
builtin/{commit-graph,multi-pack-index}.c.
Some of the implementation here, such as a function being named
run_hooks_opt() when it's tasked with running one hook, to using the
run_processes_parallel_tr2() API to run with jobs=1 is somewhere
between a bit odd and and an overkill for the current features of this
"hook run" command and the hook.[ch] API.
This code will eventually be able to run multiple hooks declared in
config in parallel, by starting out with these names and APIs we
reduce the later churn of renaming functions, switching from the
run_command() to run_processes_parallel_tr2() API etc.
Signed-off-by: Emily Shaffer <emilyshaffer@google.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Emily Shaffer <emilyshaffer@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When fetching packfiles, we write a bunch of lockfiles for the packfiles
we're writing into the repository. In order to not leave behind any
cruft in case we exit or receive a signal, we register both an exit
handler as well as signal handlers for common signals like SIGINT. These
handlers will then unlink the locks and free the data structure tracking
them. We have observed a deadlock in this logic though:
(gdb) bt
#0 __lll_lock_wait_private () at ../sysdeps/unix/sysv/linux/x86_64/lowlevellock.S:95
#1 0x00007f4932bea2cd in _int_free (av=0x7f4932f2eb20 <main_arena>, p=0x3e3e4200, have_lock=0) at malloc.c:3969
#2 0x00007f4932bee58c in __GI___libc_free (mem=<optimized out>) at malloc.c:2975
#3 0x0000000000662ab1 in string_list_clear ()
#4 0x000000000044f5bc in unlock_pack_on_signal ()
#5 <signal handler called>
#6 _int_free (av=0x7f4932f2eb20 <main_arena>, p=<optimized out>, have_lock=0) at malloc.c:4024
#7 0x00007f4932bee58c in __GI___libc_free (mem=<optimized out>) at malloc.c:2975
#8 0x000000000065afd5 in strbuf_release ()
#9 0x000000000066ddb9 in delete_tempfile ()
#10 0x0000000000610d0b in files_transaction_cleanup.isra ()
#11 0x0000000000611718 in files_transaction_abort ()
#12 0x000000000060d2ef in ref_transaction_abort ()
#13 0x000000000060d441 in ref_transaction_prepare ()
#14 0x000000000060e0b5 in ref_transaction_commit ()
#15 0x00000000004511c2 in fetch_and_consume_refs ()
#16 0x000000000045279a in cmd_fetch ()
#17 0x0000000000407c48 in handle_builtin ()
#18 0x0000000000408df2 in cmd_main ()
#19 0x00000000004078b5 in main ()
The process was killed with a signal, which caused the signal handler to
kick in and try free the data structures after we have unlinked the
locks. It then deadlocks while calling free(3P).
The root cause of this is that it is not allowed to call certain
functions in async-signal handlers, as specified by signal-safety(7).
Next to most I/O functions, this list of disallowed functions also
includes memory-handling functions like malloc(3P) and free(3P) because
they may not be reentrant. As a result, if we execute such functions in
the signal handler, then they may operate on inconistent state and fail
in unexpected ways.
Fix this bug by not calling non-async-signal-safe functions when running
in the signal handler. We're about to re-raise the signal anyway and
will thus exit, so it's not much of a problem to keep the string list of
lockfiles untouched. Note that it's fine though to call unlink(2), so
we'll still clean up the lockfiles correctly.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Reviewed-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git update-index --refresh' and '--really-refresh' should force writing
of the index file if racy timestamps have been encountered, as
'git status' already does [1].
Note that calling 'git update-index --refresh' still does not guarantee
that there will be no more racy timestamps afterwards (the same holds
true for 'git status'):
- calling 'git update-index --refresh' immediately after touching and
adding a file may still leave racy timestamps if all three operations
occur within the racy-tolerance (usually 1 second unless USE_NSEC has
been defined)
- calling 'git update-index --refresh' for timestamps which are set into
the future will leave them racy
To guarantee that such racy timestamps will be resolved would require to
wait until the system clock has passed beyond these timestamps and only
then write the index file. Especially for future timestamps, this does
not seem feasible because of possibly long delays/hangs.
[1] https://lore.kernel.org/git/d3dd805c-7c1d-30a9-6574-a7bfcb7fc013@syntevo.com/
Signed-off-by: Marc Strapetz <marc.strapetz@syntevo.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are two functions that have very similar logic of finding a header
value. find_commit_header, and find_header. We can conslidate the logic
by introducing a new function find_header_mem, which is equivalent to
find_commit_header except it takes a len parameter that determines how
many bytes will be read. find_commit_header and find_header can then both
call find_header_mem.
This reduces duplicate logic, as the logic for finding header values
can now all live in one place.
Signed-off-by: John Cai <johncai86@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The default merge message prepared by "git merge" records the name
of the current branch; the name can be overridden with a new option
to allow users to pretend a merge is made on a different branch.
* jc/merge-detached-head-name:
merge: allow to pretend a merge is made into a different branch
"git am" learns "--empty=(stop|drop|keep)" option to tweak what is
done to a piece of e-mail without a patch in it.
* xw/am-empty:
am: support --allow-empty to record specific empty patches
am: support --empty=<option> to handle empty patches
doc: git-format-patch: describe the option --always
Many git commands that deal with working tree files try to remove a
directory that becomes empty (i.e. "git switch" from a branch that
has the directory to another branch that does not would attempt
remove all files in the directory and the directory itself). This
drops users into an unfamiliar situation if the command was run in
a subdirectory that becomes subject to removal due to the command.
The commands have been taught to keep an empty directory if it is
the directory they were started in to avoid surprising users.
* en/keep-cwd:
t2501: simplify the tests since we can now assume desired behavior
dir: new flag to remove_dir_recurse() to spare the original_cwd
dir: avoid incidentally removing the original_cwd in remove_path()
stash: do not attempt to remove startup_info->original_cwd
rebase: do not attempt to remove startup_info->original_cwd
clean: do not attempt to remove startup_info->original_cwd
symlinks: do not include startup_info->original_cwd in dir removal
unpack-trees: add special cwd handling
unpack-trees: refuse to remove startup_info->original_cwd
setup: introduce startup_info->original_cwd
t2501: add various tests for removing the current working directory
Even if some of these messages are not subject to gettext i18n, this
helps bring a single style of message for a given error type.
Signed-off-by: Jean-Noël Avila <jn.avila@free.fr>
Reviewed-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
They are all replaced by "the option '%s' requires '%s'", which is a
new string but replaces 17 previous unique strings.
Signed-off-by: Jean-Noël Avila <jn.avila@free.fr>
Reviewed-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use placeholders for constant tokens. The strings are turned into
"cannot be used together"
Signed-off-by: Jean-Noël Avila <jn.avila@free.fr>
Reviewed-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use static strings for constant parts of the sentences. They are all
turned into "cannot be used together".
Signed-off-by: Jean-Noël Avila <jn.avila@free.fr>
Reviewed-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In commit bee8691f19 ("stash: restore untracked files AFTER restoring
tracked files", 2021-09-10), we correctly identified that we should
restore changes to tracked files before attempting to restore untracked
files, and accordingly moved the code for restoring untracked files a
few lines down in do_apply_stash(). Unfortunately, the intervening
lines had some early return statements meaning that we suddenly stopped
restoring untracked files in some cases.
Even before the previous commit, there was another possible issue with
the current code -- a post-stash-apply 'git status' that was intended
to be run after restoring the stash was skipped when we hit a conflict
(or other error condition), which seems slightly inconsistent.
Fix both issues by saving the return status, and letting other
functionality run before returning.
Reported-by: AJ Henderson
Test-case-by: Randall S. Becker <randall.becker@nexbridge.ca>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ab/reflog-prep:
reflog + refs-backend: move "verbose" out of the backend
refs files-backend: assume cb->newlog if !EXPIRE_REFLOGS_DRY_RUN
reflog: reduce scope of "struct rev_info"
reflog expire: don't use lookup_commit_reference_gently()
reflog expire: refactor & use "tip_commit" only for UE_NORMAL
reflog expire: use "switch" over enum values
reflog: change one->many worktree->refnames to use a string_list
reflog expire: narrow scope of "cb" in cmd_reflog_expire()
reflog delete: narrow scope of "cmd" passed to count_reflog_ent()
The "init" and "set" subcommands in "git sparse-checkout" have been
unified for a better user experience and performance.
* en/sparse-checkout-set:
sparse-checkout: remove stray trailing space
clone: avoid using deprecated `sparse-checkout init`
Documentation: clarify/correct a few sparsity related statements
git-sparse-checkout.txt: update to document init/set/reapply changes
sparse-checkout: enable reapply to take --[no-]{cone,sparse-index}
sparse-checkout: enable `set` to initialize sparse-checkout mode
sparse-checkout: split out code for tweaking settings config
sparse-checkout: disallow --no-stdin as an argument to set
sparse-checkout: add sanity-checks on initial sparsity state
sparse-checkout: break apart functions for sparse_checkout_(set|add)
sparse-checkout: pass use_stdin as a parameter instead of as a global
New interface into the tmp-objdir API to help in-core use of the
quarantine feature.
* ns/tmp-objdir:
tmp-objdir: disable ref updates when replacing the primary odb
tmp-objdir: new API for creating temporary writable databases
"git format-patch" uses a single rev_info instance and then exits.
Mark the structure with UNLEAK() macro to squelch leak sanitizer.
* jc/unleak-log:
format-patch: mark rev_info with UNLEAK
When in cone mode sparse-checkout, it is unclear how 'git
sparse-checkout add <dir1> ...' should behave if the existing
sparse-checkout file does not match the cone mode patterns. Change the
behavior to fail with an error message about the existing patterns.
Also, all cone mode patterns start with a '/' character, so add that
restriction. This is necessary for our example test 'cone mode: warn on
bad pattern', but also requires modifying the example sparse-checkout
file we use to test the warnings related to recognizing cone mode
patterns.
This error checking would cause a failure further down the test script
because of a test that adds non-cone mode patterns without cleaning them
up. Perform that cleanup as part of the test now.
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a test to t1091-sparse-checkout-builtin.sh that would result in an
infinite loop and out-of-memory error before this change. The issue
relies on having non-cone-mode patterns while trying to modify the
patterns in cone-mode.
The fix is simple, allowing us to break from the loop when the input
path does not contain a slash, as the "dir" pattern we added does not.
This is only a fix to the critical out-of-memory error. A better
response to such a strange state will follow in a later change.
Reported-by: Calbabreaker <calbabreaker@gmail.com>
Helped-by: Taylor Blau <me@ttaylorr.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the cat_one_file() logic that calls get_oid_with_context()
under --textconv and --filters to use the GET_OID_ONLY_TO_DIE flag,
thus improving the error messaging emitted when e.g. <path> is missing
but <rev> is not.
To service the "cat-file" use-case we need to introduce a new
"GET_OID_REQUIRE_PATH" flag, otherwise it would exit early as soon as
a valid "HEAD" was resolved, but in the "cat-file" case being changed
we always need a valid revision and path.
This arguably makes the "<bad rev>:<bad path>" and "<bad
rev>:<good (in HEAD) path>" use cases worse, as we won't quote the
<path> component at the user anymore, but let's just use the existing
logic "git log" et al use for now. We can improve the messaging for
those cases as a follow-up for all callers.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the usage output emitted on "git cat-file -h" to group related
options, making it clear to users which options go with which other
ones.
The new output is:
Check object existence or emit object contents
-e check if <object> exists
-p pretty-print <object> content
Emit [broken] object attributes
-t show object type (one of 'blob', 'tree', 'commit', 'tag', ...)
-s show object size
--allow-unknown-type allow -s and -t to work with broken/corrupt objects
Batch objects requested on stdin (or --batch-all-objects)
--batch[=<format>] show full <object> or <rev> contents
--batch-check[=<format>]
like --batch, but don't emit <contents>
--batch-all-objects with --batch[-check]: ignores stdin, batches all known objects
Change or optimize batch output
--buffer buffer --batch output
--follow-symlinks follow in-tree symlinks
--unordered do not order objects before emitting them
Emit object (blob or tree) with conversion or filter (stand-alone, or with batch)
--textconv run textconv on object's content
--filters run filters on object's content
--path blob|tree use a <path> for (--textconv | --filters ); Not with 'batch'
The old usage was:
<type> can be one of: blob, tree, commit, tag
-t show object type
-s show object size
-e exit with zero when there's no error
-p pretty-print object's content
--textconv for blob objects, run textconv on object's content
--filters for blob objects, run filters on object's content
--batch-all-objects show all objects with --batch or --batch-check
--path <blob> use a specific path for --textconv/--filters
--allow-unknown-type allow -s and -t to work with broken/corrupt objects
--buffer buffer --batch output
--batch[=<format>] show info and content of objects fed from the standard input
--batch-check[=<format>]
show info about objects fed from the standard input
--follow-symlinks follow in-tree symlinks (used with --batch or --batch-check)
--unordered do not order --batch-all-objects output
While shorter, I think the new one is easier to understand, as
e.g. "--allow-unknown-type" is grouped with "-t" and "-s", as it can
only be combined with those options. The same goes for "--buffer",
"--unordered" etc.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With the migration of --batch-all-objects to OPT_CMDMODE() in the
preceding commit one bug with combining it and other OPT_CMDMODE()
options was solved, but we were still left with e.g. --buffer silently
being discarded when not in batch mode.
Fix all those bugs, and in addition emit errors telling the user
specifically what options can't be combined with what other options,
before this we'd usually just emit the cryptic usage text and leave
the users to work it out by themselves.
This change is rather large, because to do so we need to untangle the
options processing so that we can not only error out, but emit
sensible errors, and e.g. emit errors about options before errors
about stray argc elements (as they might become valid if the option
were removed).
Some of the output changes ("error:" to "fatal:" with
usage_msg_opt[f]()), but none of the exit codes change, except in
those cases where we silently accepted bad option combinations before,
now we'll error out.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The usage of OPT_CMDMODE() in "cat-file"[1] was added in parallel with
the development of[3] the --batch-all-objects option[4], so we've
since grown[5] checks that it can't be combined with other command
modes, when it should just be made a top-level command-mode
instead. It doesn't combine with --filters, --textconv etc.
By giving parse_options() information about what options are mutually
exclusive with one another we can get the die() message being removed
here for free, we didn't even use that removed message in some cases,
e.g. for both of:
--batch-all-objects --textconv
--batch-all-objects --filters
We'd take the "goto usage" in the "if (opt)" branch, and never reach
the previous message. Now we'll emit e.g.:
$ git cat-file --batch-all-objects --filters
error: option `filters' is incompatible with --batch-all-objects
1. b48158ac94 (cat-file: make the options mutually exclusive, 2015-05-03)
2. https://lore.kernel.org/git/xmqqtwspgusf.fsf@gitster.dls.corp.google.com/
3. https://lore.kernel.org/git/20150622104559.GG14475@peff.net/
4. 6a951937ae (cat-file: add --batch-all-objects option, 2015-06-22)
5. 321459439e (cat-file: support --textconv/--filters in batch mode, 2016-09-09)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There's no benefit to defining this at a distance, and it makes the
code harder to read as you've got to scroll up to see the usage that
corresponds to the options.
In subsequent commits I'll make use of usage_msg_opt(), which will be
quite noisy if I have to use the long "cat_file_usage" variable,
there's no other command being defined in this file, so let's rename
it to just "usage".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There were various inaccuracies in the previous SYNOPSIS output,
e.g. "--path" is not something that can optionally go with any options
except --textconv or --filters, as the output implied.
The opening line of the DESCRIPTION section is also "In its first
form[...]", which refers to "git cat-file <type> <object>", but the
SYNOPSIS section wasn't showing that as the first form!
That part of the documentation made sense in
d83a42f34a (Documentation: minor grammatical fixes in
git-cat-file.txt, 2009-03-22) when it was introduced, but since then
various options that were added have made that intro make no sense in
the context it was in. Now the two will match again.
The usage output here is not properly aligned on "master" currently,
but will be with my in-flight 4631cfc20b (parse-options: properly
align continued usage output, 2021-09-21), so let's indent things
correctly in the C code in anticipation of that.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a usage_msg_optf() as a shorthand for the sort of
usage_msg_opt(xstrfmt(...)) used in builtin/stash.c. I'll make more
use of this function in builtin/cat-file.c shortly.
The disconnect between the "..." and "fmt" is a bit unusual, but it
works just fine and this keeps it consistent with usage_msg_opt(),
i.e. a caller of it can be moved to usage_msg_optf() and not have to
have its arguments re-arranged.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git fetch --set-upstream" did not check if there is a current
branch, leading to a segfault when it is run on a detached HEAD,
which has been corrected.
* ab/fetch-set-upstream-while-detached:
pull, fetch: fix segfault in --set-upstream option
Move the handling of the "verbose" flag entirely out of
"refs/files-backend.c" and into "builtin/reflog.c". This allows the
backend to stop knowing about the EXPIRE_REFLOGS_VERBOSE flag.
The expire_reflog_ent() function shouldn't need to deal with the
implementation detail of whether or not we're emitting verbose output,
by doing this the --verbose output becomes backend-agnostic, so
reftable will get the same output.
I think the output is rather bad currently, and should e.g. be
implemented with some better future mode of progress.[ch], but that's
a topic for another improvement.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the "cmd.stalefix" handling added in 1389d9ddaa (reflog expire
--fix-stale, 2007-01-06) to use a locally scoped "struct
rev_info". This code relies on mark_reachable_objects() twiddling
flags in the walked objects.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the initial implementation of "git reflog" in 4264dc15e1 (git
reflog expire, 2006-12-19) we had this
lookup_commit_reference_gently().
I don't think we've ever found tags that we need to recursively
dereference in reflogs, so this should at least be changed to a
"lookup commit" as I'm doing here, although I can't think of a way
where it mattered in practice.
I also think we'd probably like to just die here if we have a NULL
object, but as this code needs to handle potentially broken
repositories let's just show an "error" but continue, the non-quiet
lookup_commit() will do for us. None of our tests cover the case where
"commit" is NULL after this lookup.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add an intermediate variable for "tip_commit" in
reflog_expiry_prepare(), and only add it to the struct if we're
handling the UE_NORMAL case.
The code behaves the same way as before, but this makes the control
flow clearer, and the shorter name allows us to fold a 4-line i/else
into a one-line ternary instead.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change code added in 03cb91b18c (reflog --expire-unreachable: special
case entries in "HEAD" reflog, 2010-04-09) to use a "switch" statement
with an exhaustive list of "case" statements instead of doing numeric
comparisons against the enum labels.
Now we won't assume that "x != UE_ALWAYS" means "(x == UE_HEAD || x ||
UE_NORMAL)". That assumption is true now, but we'd introduce subtle
bugs here if that were to change, now the compiler will notice and
error out on such errors.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the FLEX_ARRAY pattern added in bda3a31cc7 (reflog-expire:
Avoid creating new files in a directory inside readdir(3) loop,
2008-01-25) the string-list API instead.
This does not change any behavior, allows us to delete much of this
code as it's replaced by things we get from the string-list API for
free, as a result we need just one struct to keep track of this data,
instead of two.
The "DUP" -> "string_list_append_nodup(..., strbuf_detach(...))"
pattern here is the same as that used in a recent memory leak fix in
b202e51b15 (grep: fix a "path_list" memory leak, 2021-10-22).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As with the preceding change for "reflog delete", change the "cb_data"
we pass to callbacks to be &cb.cmd itself, instead of passing &cb and
having the callback lookup cb->cmd.
This makes it clear that the "cb" itself is the same memzero'd
structure on each iteration of the for-loops that use &cb, except for
the "cmd" member.
The "struct expire_reflog_policy_cb" we pass to reflog_expire() will
have the members that aren't "cmd" modified by the callbacks, but
before we invoke them everything except "cmd" is zero'd out.
This included the "tip_commit", "mark_list" and "tips". It might have
looked as though we were re-using those between iterations, but the
first thing we did in reflog_expiry_prepare() was to either NULL them,
or clobber them with another value.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the "cb_data" we pass to the count_reflog_ent() to be the
&cb.cmd itself, instead of passing &cb and having the callback lookup
cb->cmd.
This makes it clear that the "cb" itself is the same memzero'd
structure on each iteration of the for-loop that uses &cb, except for
the "cmd" member.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Existing callers to 'git ls-files' are expecting file names, not
directories. It is best to expand a sparse index to show all of the
contained files in this case.
However, expert users may want to inspect the contents of the index
itself including which directories are sparse. Add a --sparse option to
allow users to request this information.
During testing, I noticed that options such as --modified did not affect
the output when the files in question were outside the sparse-checkout
definition. Tests are added to document this preexisting behavior and
how it remains unchanged with the sparse index and the --sparse option.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'git fetch' and 'git pull' commands parse the index in order to
determine if submodules exist. Without command_requires_full_index=0,
this will expand a sparse index, causing slow performance even when
there is no new data to fetch.
The .gitmodules file will never be inside a sparse directory entry, and
even if it was, the index_name_pos() method would expand the sparse
index if needed as we search for the path by name. These commands do not
iterate over the index, which is the typical thing we are careful about
when integrating with the sparse index.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach diff and blame to work well with sparse index.
* ld/sparse-diff-blame:
blame: enable and test the sparse index
diff: enable and test the sparse index
diff: replace --staged with --cached in t1092 tests
repo-settings: prepare_repo_settings only in git repos
test-read-cache: set up repo after git directory
commit-graph: return if there is no git directory
git: ensure correct git directory setup with -h
"git name-rev" has been tweaked to give output that is shorter and
easier to understand.
* en/name-rev-shorter-output:
name-rev: prefer shorter names over following merges
"git fetch" without the "--update-head-ok" option ought to protect
a checked out branch from getting updated, to prevent the working
tree that checks it out to go out of sync. The code was written
before the use of "git worktree" got widespread, and only checked
the branch that was checked out in the current worktree, which has
been updated.
(originally called ak/fetch-not-overwrite-any-current-branch)
* ak/protect-any-current-branch:
branch: protect branches checked out in all worktrees
receive-pack: protect current branch for bare repository worktree
receive-pack: clean dead code from update_worktree()
fetch: protect branches checked out in all worktrees
worktree: simplify find_shared_symref() memory ownership model
branch: lowercase error messages
receive-pack: lowercase error messages
fetch: lowercase error messages
Extend the signing of objects with SSH keys and learn to pay
attention to the key validity time range when verifying.
* fs/ssh-signing-key-lifetime:
ssh signing: verify ssh-keygen in test prereq
ssh signing: make fmt-merge-msg consider key lifetime
ssh signing: make verify-tag consider key lifetime
ssh signing: make git log verify key lifetime
ssh signing: make verify-commit consider key lifetime
ssh signing: add key lifetime test prereqs
ssh signing: use sigc struct to pass payload
t/fmt-merge-msg: make gpgssh tests more specific
t/fmt-merge-msg: do not redirect stderr
When "git log" implicitly enabled the "decoration" processing
without being explicitly asked with "--decorate" option, it failed
to read and honor the settings given by the "--decorate-refs"
option.
* jk/log-decorate-opts-with-implicit-decorate:
log: load decorations with --simplify-by-decoration
log: handle --decorate-refs with userformat "%d"
The revision traversal machinery typically processes and returns all
children before any parent. fast-export needs to operate in the
reverse fashion, handling parents before any of their children in
order to build up the history starting from the root commit(s). This
would be a clear case where we could just use the revision traversal
machinery's "reverse" option to achieve this desired affect.
However, this wasn't what the code did. It added its own array for
queuing. The obvious hand-rolled solution would be to just push all
the commits into the array and then traverse afterwards, but it didn't
quite do that either. It instead attempted to process anything it
could as soon as it could, and once it could, check whether it could
process anything that had been queued. As far as I can tell, this was
an effort to save a little memory in the case of multiple root commits
since it could process some commits before queueing all of them. This
involved some helper functions named has_unshown_parent() and
handle_tail(). For typical invocations of fast-export, this
alternative essentially amounted to a hand-rolled method of reversing
the commits -- it was a bunch of work to duplicate the revision
traversal machinery's "reverse" option.
This hand-rolled reversing mechanism is actually somewhat difficult to
reason about. It takes some time to figure out how it ensures in
normal cases that it will actually process all traversed commits
(rather than just dropping some and not printing anything for them).
And it turns out there are some cases where the code does drop commits
without handling them, and not even printing an error or warning for
the user. Due to the has_unshown_parent() checks, some commits could
be left in the array at the end of the "while...get_revision()" loop
which would be unprocessed. This could be triggered for example with
git fast-export main -- --first-parent
or non-sensical traversal rules such as
git fast-export main -- --grep=Merge --invert-grep
While most traversals that don't include all parents should likely
trigger errors in fast-export (or at least require being used in
combination with --reference-excluded-parents), the --first-parent
traversal is at least reasonable and it'd be nice if it didn't just drop
commits. It'd also be nice for future readers of the code to have a
simpler "reverse traversal" mechanism. Use the "reverse" option of the
revision traversal machinery to achieve both.
Even for the non-sensical traversal flags like the --grep one above,
this would be an improvement. For example, in that case, the code
previously would have silently truncated history to only those commits
that do not have an ancestor containing "Merge" in their commit message.
After this code change, that case would include all commits without
"Merge" in their commit message -- but any commit that previously had a
"Merge"-mentioning parent would lose that parent
(likely resulting in many new root commits). While the new behavior is
still odd, it is at least understandable given that
--reference-excluded-parents is not the default.
Helped-by: Elijah Newren <newren@gmail.com>
Signed-off-by: William Sprent <williams@unity3d.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It can be helpful when creating a new branch to use the existing
tracking configuration from the branch point. However, there is
currently not a method to automatically do so.
Teach git-{branch,checkout,switch} an "inherit" argument to the
"--track" option. When this is set, creating a new branch will cause the
tracking configuration to default to the configuration of the branch
point, if set.
For example, if branch "main" tracks "origin/main", and we run
`git checkout --track=inherit -b feature main`, then branch "feature"
will track "origin/main". Thus, `git status` will show us how far
ahead/behind we are from origin, and `git pull` will pull from origin.
This is particularly useful when creating branches across many
submodules, such as with `git submodule foreach ...` (or if running with
a patch such as [1], which we use at $job), as it avoids having to
manually set tracking info for each submodule.
Since we've added an argument to "--track", also add "--track=direct" as
another way to explicitly get the original "--track" behavior ("--track"
without an argument still works as well).
Finally, teach branch.autoSetupMerge a new "inherit" option. When this
is set, "--track=inherit" becomes the default behavior.
[1]: https://lore.kernel.org/git/20180927221603.148025-1-sbeller@google.com/
Signed-off-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a series of patches for a topic-B depends on having topic-A,
the workflow to prepare the topic-B branch would look like this:
$ git checkout -b topic-B main
$ git merge --no-ff --no-edit topic-A
$ git am <mbox-for-topic-B
When topic-A gets updated, recreating the first merge and rebasing
the rest of the topic-B, all on detached HEAD, is a useful
technique. After updating topic-A with its new round of patches:
$ git checkout topic-B
$ prev=$(git rev-parse 'HEAD^{/^Merge branch .topic-A. into}')
$ git checkout --detach $prev^1
$ git merge --no-ff --no-edit topic-A
$ git rebase --onto HEAD $prev @{-1}^0
$ git checkout -B @{-1}
This will
(0) check out the current topic-B.
(1) find the previous merge of topic-A into topic-B.
(2) detach the HEAD to the parent of the previous merge.
(3) merge the updated topic-A to it.
(4) reapply the patches to rebuild the rest of topic-B.
(5) update topic-B with the result.
without contaminating the reflog of topic-B too much. topic-B@{1}
is the "logically previous" state before topic-A got updated, for
example. At (4), comparison (e.g. range-diff) between HEAD and
@{-1} is a meaningful way to sanity check the result, and the same
can be done at (5) by comparing topic-B and topic-B@{1}.
But there is one glitch. The merge into the detached HEAD done in
the step (3) above gives us "Merge branch 'topic-A' into HEAD", and
does not say "into topic-B".
Teach the "--into-name=<branch>" option to "git merge" and its
underlying "git fmt-merge-message", to pretend as if we were merging
into <branch>, no matter what branch we are actually merging into,
when they prepare the merge message. The pretend name honors the
usual "into <target>" suppression mechanism, which can be seen in
the tests added here.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While testing some ideas in 'git repack', I ran it with '--quiet' and
discovered that some progress output was still shown. Specifically, the
output for writing the multi-pack-index showed the progress.
The 'show_progress' variable in cmd_repack() is initialized with
isatty(2) and is not modified at all by the '--quiet' flag. The
'--quiet' flag modifies the po_args.quiet option which is translated
into a '--quiet' flag for the 'git pack-objects' child process. However,
'show_progress' is used to directly send progress information to the
multi-pack-index writing logic which does not use a child process.
The fix here is to modify 'show_progress' to be false if po_opts.quiet
is true, and isatty(2) otherwise. This new expectation simplifies a
later condition that checks both.
Update the documentation to make it clear that '-q' will disable all
progress in addition to ensuring the 'git pack-objects' child process
will receive the flag.
Use 'test_terminal' to check that this works to get around the isatty(2)
check.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
