The function is used to set up the environment variable used in a
subprocess we spawn in a submodule directory. The callers set up a
child_process structure, find the working tree path of one submodule
and set .dir field to it, and then use start_command() API to spawn
the subprocess like "status", "fetch", etc.
When this happens, we expect that the ".git" (either a directory or
a gitfile that points at the real location) in the current working
directory of the subprocess MUST be the repository for the submodule.
If this ".git" thing is a corrupt repository, however, because
prepare_submodule_repo_env() unsets GIT_DIR and GIT_WORK_TREE, the
subprocess will see ".git", thinks it is not a repository, and
attempt to find one by going up, likely to end up in finding the
repository of the superproject. In some codepaths, this will cause
a command run with the "--recurse-submodules" option to recurse
forever.
By exporting GIT_DIR=.git, disable the auto-discovery logic in the
subprocess, which would instead stop it and report an error.
The test illustrates existing problems in a few callsites of this
function. Without this fix, "git fetch --recurse-submodules", "git
status" and "git diff" keep recursing forever.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach git-diff and friends a new format for displaying the difference
of a submodule. The new format is an inline diff of the contents of the
submodule between the commit range of the update. This allows the user
to see the actual code change caused by a submodule update.
Add tests for the new format and option.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, do_submodule_path will attempt locating the .git directory by
using read_gitfile on <path>/.git. If this fails it just assumes the
<path>/.git is actually a git directory.
This is good because it allows for handling submodules which were cloned
in a regular manner first before being added to the superproject.
Unfortunately this fails if the <path> is not actually checked out any
longer, such as by removing the directory.
Fix this by checking if the directory we found is actually a gitdir. In
the case it is not, attempt to lookup the submodule configuration and
find the name of where it is stored in the .git/modules/ directory of
the superproject.
If we can't locate the submodule configuration, this might occur because
for example a submodule gitlink was added but the corresponding
.gitmodules file was not properly updated. A die() here would not be
pleasant to the users of submodule diff formats, so instead, modify
do_submodule_path() to return an error code:
- git_pathdup_submodule() returns NULL when we fail to find a path.
- strbuf_git_path_submodule() propagates the error code to the caller.
Modify the callers of these functions to check the error code and fail
properly. This ensures we don't attempt to use a bad path that doesn't
match the corresponding submodule.
Because this change fixes add_submodule_odb() to work even if the
submodule is not checked out, update the wording of the submodule log
diff format to correctly display that the submodule is "not initialized"
instead of "not checked out"
Add tests to ensure this change works as expected.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add an extension to git-diff and git-log (and any other graph-aware
displayable output) such that "--line-prefix=<string>" will print the
additional line-prefix on every line of output.
To make this work, we have to fix a few bugs in the graph API that force
graph_show_commit_msg to be used only when you have a valid graph.
Additionally, we extend the default_diff_output_prefix handler to work
even when no graph is enabled.
This is somewhat of a hack on top of the graph API, but I think it
should be acceptable here.
This will be used by a future extension of submodule display which
displays the submodule diff as the actual diff between the pre and post
commit in the submodule project.
Add some tests for both git-log and git-diff to ensure that the prefix
is honored correctly.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If option --help is passed to a Git command, we try to open
the man page of that command. However, we do it for both commands
and concepts. Make sure it is an actual command.
This makes "git <concept> --help" not working anymore, while
"git help <concept>" still works.
Signed-off-by: Ralf Thielow <ralf.thielow@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce option --exclude-guides to the help command. With this option
being passed, "git help" will open man pages only for actual commands.
Since we know it is a command, we can use function help_unknown_command
to give the user advice on typos.
Helped-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Ralf Thielow <ralf.thielow@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Each test run generates a "count" file in t/test-results
that stores the number of successful, failed, etc tests.
If you run "t1234-foo.sh", that file is named as
"t/test-results/t1234-foo-$$.count"
The addition of the PID there is serving no purpose, and
makes analysis of the count files harder.
The presence of the PID dates back to 2d84e9f (Modify
test-lib.sh to output stats to t/test-results/*,
2008-06-08), but no reasoning is given there. Looking at the
current code, we can see that other files we write to
test-results (like *.exit and *.out) do _not_ have the PID
included. So the presence of the PID does not meaningfully
allow one to store the results from multiple runs anyway.
Moreover, anybody wishing to read the *.count files to
aggregate results has to deal with the presence of multiple
files for a given test (and figure out which one is the most
recent based on their timestamps!). The only consumer of
these files is the aggregate.sh script, which arguably gets
this wrong. If a test is run multiple times, its counts will
appear multiple times in the total (I say arguably only
because the desired semantics aren't documented anywhere,
but I have trouble seeing how this behavior could be
useful).
So let's just drop the PID, which fixes aggregate.sh, and
will make new features based around the count files easier
to write.
Note that since the count-file may already exist (when
re-running a test), we also switch the "cat" from appending
to truncating. The use of append here was pointless in the
first place, as we expected to always write to a unique file.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 3b75ee9 ("blame: allow to blame paths freshly added to the index",
2016-07-16) git blame also looks at the index to determine if there is a
file that was freshly added to the index.
cache_name_pos returns -pos - 1 in case there is no match is found, or
if the name matches, but the entry has a stage other than 0. As git
blame should work for unmerged files, it uses strcmp to determine
whether the name of the returned position matches, in which case the
file exists, but is merely unmerged, or if the file actually doesn't
exist in the index.
If the repository is empty, or if the file would lexicographically be
sorted as the last file in the repository, -cache_name_pos - 1 is
outside of the length of the active_cache array, causing git blame to
segfault. Guard against that, and die() normally to restore the old
behaviour.
Reported-by: Simon Ruderich <simon@ruderich.org>
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The tempfile (hence its user lockfile) API lets the caller to open
a file descriptor to a temporary file, write into it and then
finalize it by first closing the filehandle and then either
removing or renaming the temporary file. When the process spawns a
subprocess after obtaining the file descriptor, and if the
subprocess has not exited when the attempt to remove or rename is
made, the last step fails on Windows, because the subprocess has
the file descriptor still open. Open tempfile with O_CLOEXEC flag
to avoid this (on Windows, this is mapped to O_NOINHERIT).
* bw/mingw-avoid-inheriting-fd-to-lockfile:
mingw: ensure temporary file handles are not inherited by child processes
t6026-merge-attr: child processes must not inherit index.lock handles
Receive-pack feeds its input to either index-pack or
unpack-objects, which will happily accept as many bytes as
a sender is willing to provide. Let's allow an arbitrary
cutoff point where we will stop writing bytes to disk.
Cleaning up what has already been written to disk is a
related problem that is not addressed by this patch.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the default behavior of git-format-patch to generate numbered
sequence of 0/1 and 1/1 when generating both a cover-letter and a single
patch. This standardizes the cover letter to have 0/N which helps
distinguish the cover letter from the patch itself. Since the behavior
is easily changed via configuration as well as the use of -n and -N this
should be acceptable default behavior.
Add tests for the new default behavior.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This just shows off the improvements done by the last few
patches, and gives us a baseline for noticing regressions in
the future. Here are the results with linux.git as the perf
"large repo":
Test origin HEAD
-------------------------------------------------------------------
0003.1: log --raw 43.41(40.36+2.69) 33.86(30.96+2.41) -22.0%
0003.2: log -S 313.61(309.74+3.78) 298.75(295.58+3.00) -4.7%
(for a large repo, the "log -S" improvements are greater if
you bump the delta base cache limit, but I think it makes
sense to test the "stock" behavior, since that is what most
people will see).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the index is locked and child processes inherit the handle to
said lock and the parent process wants to remove the lock before the
child process exits, on Windows there is a problem: it won't work
because files cannot be deleted if a process holds a handle on them.
The symptom:
Rename from 'xxx/.git/index.lock' to 'xxx/.git/index' failed.
Should I try again? (y/n)
Spawning child processes with bInheritHandles==FALSE would not work
because no file handles would be inherited, not even the hStdXxx
handles in STARTUPINFO (stdin/stdout/stderr).
Opening every file with O_NOINHERIT does not work, either, as e.g.
git-upload-pack expects inherited file handles.
This leaves us with the only way out: creating temp files with the
O_NOINHERIT flag. This flag is Windows-specific, however. For our
purposes, it is equivalent to O_CLOEXEC (which does not exist on
Windows), so let's just open temporary files with the O_CLOEXEC flag and
map that flag to O_NOINHERIT on Windows.
As Eric Wong pointed out, we need to be careful to handle the case where
the Linux headers used to compile Git support O_CLOEXEC but the Linux
kernel used to run Git does not: it returns an EINVAL.
This fixes the test that we just introduced to demonstrate the problem.
Signed-off-by: Ben Wijen <ben@wijen.net>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git rev-parse --git-path hooks/<hook>" learned to take
core.hooksPath configuration variable (introduced during 2.9 cycle)
into account.
* ab/hooks:
rev-parse: respect core.hooksPath in --git-path
"git difftool" by default ignores the error exit from the backend
commands it spawns, because often they signal that they found
differences by exiting with a non-zero status code just like "diff"
does; the exit status codes 126 and above however are special in
that they are used to signal that the command is not executable,
does not exist, or killed by a signal. "git difftool" has been
taught to notice these exit status codes.
* jk/difftool-command-not-found:
difftool: always honor fatal error exit codes
"git checkout --detach <branch>" used to give the same advice
message as that is issued when "git checkout <tag>" (or anything
that is not a branch name) is given, but asking with "--detach" is
an explicit enough sign that the user knows what is going on. The
advice message has been squelched in this case.
* sb/checkout-explit-detach-no-advice:
checkout: do not mention detach advice for explicit --detach option
The t0027 test for CRLF conversion was timing dependent and flaky.
* tb/t0027-raciness-fix:
convert: Correct NNO tests and missing `LF will be replaced by CRLF`
When "git merge-recursive" works on history with many criss-cross
merges in "verbose" mode, the names the command assigns to the
virtual merge bases could have overwritten each other by unintended
reuse of the same piece of memory.
* rs/pull-signed-tag:
commit: use FLEX_ARRAY in struct merge_remote_desc
merge-recursive: fix verbose output for multiple base trees
commit: factor out set_merge_remote_desc()
commit: use xstrdup() in get_merge_parent()
On Windows, a file cannot be removed unless all file handles to it have
been released. Hence it is particularly important to close handles when
spawning children (which would probably not even know that they hold on
to those handles).
The example chosen for this test is a custom merge driver that indeed
has no idea that it blocks the deletion of index.lock. The full use case
is a daemon that lives on after the merge, with subsequent invocations
handing off to the daemon, thereby avoiding hefty start-up costs. We
simulate this behavior by simply sleeping one second.
Note that the test only fails on Windows, due to the file locking issue.
Since we have no way to say "expect failure with MINGW, success
otherwise", we simply skip this test on Windows for now.
Signed-off-by: Ben Wijen <ben@wijen.net>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When `--recursive` and `--reference` is given, it is reasonable to
expect that the submodules are created with references to the submodules
of the given alternate for the superproject.
An initial attempt to do this was presented to the mailing list, which
used flags that are passed around ("--super-reference") that instructed
the submodule clone to look for a reference in the submodules of the
referenced superproject. This is not well thought out, as any further
`submodule update` should also respect the initial setup.
When a new submodule is added to the superproject and the alternate
of the superproject does not know about that submodule yet, we rather
error out informing the user instead of being unclear if we did or did
not use a submodules alternate.
To solve this problem introduce new options that store the configuration
for what the user wanted originally.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "t/" hierarchy is prone to get an unusual pathname; "make test"
has been taught to make sure they do not contain paths that cannot
be checked out on Windows (and the mechanism can be reusable to
catch pathnames that are not portable to other platforms as need
arises).
* js/test-lint-pathname:
t/Makefile: ensure that paths are valid on platforms we care
A small test clean-up for a topic introduced in v2.9.1 and later.
* sg/reflog-past-root:
t1410: remove superfluous 'git reflog' from the 'walk past root' test
The idea of the --git-path option is not only to avoid having to
prefix paths with the output of --git-dir all the time, but also to
respect overrides for specific common paths inside the .git directory
(e.g. `git rev-parse --git-path objects` will report the value of the
environment variable GIT_OBJECT_DIRECTORY, if set).
When introducing the core.hooksPath setting, we forgot to adjust
git_path() accordingly. This patch fixes that.
While at it, revert the special-casing of core.hooksPath in
run-command.c, as it is now no longer needed.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some pathnames that are okay on ext4 and on HFS+ cannot be checked
out on Windows. Tests that want to see operations on such paths on
filesystems that support them must do so behind appropriate test
prerequisites, and must not include them in the source tree (instead
they should create them when they run). Otherwise, the source tree
cannot even be checked out.
Make sure that double-quotes, asterisk, colon, greater/less-than,
question-mark, backslash, tab, vertical-bar, as well as any non-ASCII
characters never appear in the pathnames with a new test-lint-* target
as part of a `make test`. To that end, we call `git ls-files` (ensuring
that the paths are quoted properly), relying on the fact that paths
containing non-ASCII characters are quoted within double-quotes.
In case that the source code does not actually live in a Git
repository (e.g. when extracted from a .zip file), or that the `git`
executable cannot be executed, we simply ignore the error for now; In
that case, our trusty Continuous Integration will be the last line of
defense and catch any problematic file name.
Noticed when a topic wanted to add a pathname with '>' in it. A
check like this will prevent a similar problems from happening in the
future.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
At the moment difftool's "trust exit code" logic always suppresses the
exit status of the diff utility we invoke. This is useful because we
don't want to exit just because diff returned "1" because the files
differ, but it's confusing if the shell returns an error because the
selected diff utility is not found.
POSIX specifies 127 as the exit status for "command not found", 126 for
"command found but is not executable" and values greater than 128 if the
command terminated because it received a signal [1] and at least bash
and dash follow this specification, while diff utilities generally use
"1" for the exit status we want to ignore.
Handle any value of 126 or greater as a special value indicating that
some form of fatal error occurred.
[1] http://pubs.opengroup.org/onlinepubs/9699919799/utilities/V3_chap02.html#tag_18_08_02
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a user asked for a detached HEAD specifically with `--detach`,
we do not need to give advice on what a detached HEAD state entails as
we can assume they know what they're getting into as they asked for it.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test added in 71abeb753f (reflog: continue walking the reflog
past root commits, 2016-06-03) contains an unnecessary 'git reflog'
execution, which was part of my debug/tracing instrumentation that I
somehow didn't manage to remove before submitting.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a non-reversible CRLF conversion is done in "git add",
a warning is printed on stderr (or Git dies, depending on checksafe)
The function commit_chk_wrnNNO() in t0027 was written to test this,
but did the wrong thing: Instead of looking at the warning
from "git add", it looked at the warning from "git commit".
This is racy because "git commit" may not have to do CRLF conversion
at all if it can use the sha1 value from the index (which depends on
whether "add" and "commit" run in a single second).
Correct t0027 and replace the commit for each and every file with a commit
of all files in one go.
The function commit_chk_wrnNNO() should be renamed in a separate commit.
Now that t0027 does the right thing, it detects a bug in covert.c:
This sequence should generate the warning `LF will be replaced by CRLF`,
but does not:
$ git init
$ git config core.autocrlf false
$ printf "Line\r\n" >file
$ git add file
$ git commit -m "commit with CRLF"
$ git config core.autocrlf true
$ printf "Line\n" >file
$ git add file
"git add" calls crlf_to_git() in convert.c, which calls check_safe_crlf().
When has_cr_in_index(path) is true, crlf_to_git() returns too early and
check_safe_crlf() is not called at all.
Factor out the code which determines if "git checkout" converts LF->CRLF
into will_convert_lf_to_crlf().
Update the logic around check_safe_crlf() and "simulate" the possible
LF->CRLF conversion at "git checkout" with help of will_convert_lf_to_crlf().
Thanks to Jeff King <peff@peff.net> for analyzing t0027.
Reported-By: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
One of the indirect callers of make_virtual_commit() passes the result of
oid_to_hex() as the name, i.e. a pointer to a static buffer. Since the
function uses that string pointer directly in building a struct
merge_remote_desc, multiple entries can end up sharing the same name
inadvertently.
Fix that by calling set_merge_remote_desc(), which creates a copy of the
string, instead of building the struct by hand.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The concerned test greps the error message in git_parse_source() which
contains "bad config line %d in submodule-blob %s".
Signed-off-by: Vasco Almeida <vascomalmeida@sapo.pt>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use test_i18ngrep function instead of grep for grepping strings.
Signed-off-by: Vasco Almeida <vascomalmeida@sapo.pt>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The concerned test greps the output of exit_with_patch() in
git-rebase--interactive.sh script.
Signed-off-by: Vasco Almeida <vascomalmeida@sapo.pt>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Tests consisting of one line each can be consolidated to have fewer tests
to run as well as fewer lines of code.
When having just a few git commands, do not create a new shell but
use the -C flag in Git to execute in the correct directory.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
No functional change intended. This commit only changes formatting
to the style we recently use, e.g. starting the body of a test with a
single quote on the same line as the header, and then having the test
indented in the following lines.
Whenever we change directories, we do that in subshells.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "git rebase" tries to compare set of changes on the updated
upstream and our own branch, it computes patch-id for all of these
changes and attempts to find matches. This has been optimized by
lazily computing the full patch-id (which is expensive) to be
compared only for changes that touch the same set of paths.
* kw/patch-ids-optim:
rebase: avoid computing unnecessary patch IDs
patch-ids: add flag to create the diff patch id using header only data
patch-ids: replace the seen indicator with a commit pointer
patch-ids: stop using a hand-rolled hashmap implementation
"git difftool <paths>..." started in a subdirectory failed to
interpret the paths relative to that directory, which has been
fixed.
* jk/difftool-in-subdir:
difftool: use Git::* functions instead of passing around state
difftool: avoid $GIT_DIR and $GIT_WORK_TREE
difftool: fix argument handling in subdirs
The `rebase` family of Git commands avoid applying patches that were
already integrated upstream. They do that by using the revision walking
option that computes the patch IDs of the two sides of the rebase
(local-only patches vs upstream-only ones) and skipping those local
patches whose patch ID matches one of the upstream ones.
In many cases, this causes unnecessary churn, as already the set of
paths touched by a given commit would suffice to determine that an
upstream patch has no local equivalent.
This hurts performance in particular when there are a lot of upstream
patches, and/or large ones.
Therefore, let's introduce the concept of a "diff-header-only" patch ID,
compare those first, and only evaluate the "full" patch ID lazily.
Please note that in contrast to the "full" patch IDs, those
"diff-header-only" patch IDs are prone to collide with one another, as
adjacent commits frequently touch the very same files. Hence we now
have to be careful to allow multiple hash entries with the same hash.
We accomplish that by using the hashmap_add() function that does not even
test for hash collisions. This also allows us to evaluate the full patch ID
lazily, i.e. only when we found commits with matching diff-header-only
patch IDs.
We add a performance test that demonstrates ~1-6% improvement. In
practice this will depend on various factors such as how many upstream
changes and how big those changes are along with whether file system
caches are cold or warm. As Git's test suite has no way of catching
performance regressions, we also add a regression test that verifies
that the full patch ID computation is skipped when the diff-header-only
computation suffices.
Signed-off-by: Kevin Willford <kcwillford@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To libify `git apply` functionality we have to signal errors to the
caller instead of die()ing.
To do that in a compatible manner with the rest of the error handling
in builtin/apply.c, parse_single_patch() should return a negative
integer instead of calling die().
Let's do that by using error() and let's adjust the related test
cases accordingly.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To libify `git apply` functionality we have to signal errors to the
caller instead of die()ing.
To do that in a compatible manner with the rest of the error handling
in builtin/apply.c, let's make find_header() return -128 instead of
calling die().
We could make it return -1, unfortunately find_header() already
returns -1 when no header is found.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add lf_to_nul helper function to test-lib-functions.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A few updates to "git submodule update".
Use of "| wc -l" break with BSD variant of 'wc'.
* sb/submodule-update-dot-branch:
t7406: fix breakage on OSX
submodule update: allow '.' for branch value
submodule--helper: add remote-branch helper
submodule-config: keep configured branch around
submodule--helper: fix usage string for relative-path
submodule update: narrow scope of local variable
submodule update: respect depth in subsequent fetches
t7406: future proof tests with hard coded depth
"git am -3" calls "git merge-recursive" when it needs to fall back
to a three-way merge; this call has been turned into an internal
subroutine call instead of spawning a separate subprocess.
* js/am-3-merge-recursive-direct:
merge-recursive: flush output buffer even when erroring out
merge_trees(): ensure that the callers release output buffer
merge-recursive: offer an option to retain the output in 'obuf'
merge-recursive: write the commit title in one go
merge-recursive: flush output buffer before printing error messages
am -3: use merge_recursive() directly again
merge-recursive: switch to returning errors instead of dying
merge-recursive: handle return values indicating errors
merge-recursive: allow write_tree_from_memory() to error out
merge-recursive: avoid returning a wholesale struct
merge_recursive: abort properly upon errors
prepare the builtins for a libified merge_recursive()
merge-recursive: clarify code in was_tracked()
die(_("BUG")): avoid translating bug messages
die("bug"): report bugs consistently
t5520: verify that `pull --rebase` shows the helpful advice when failing
"git format-patch" learned format.from configuration variable to
specify the default settings for its "--from" option.
* jt/format-patch-from-config:
format-patch: format.from gives the default for --from
"git push --force-with-lease" already had enough logic to allow
ensuring that such a push results in creation of a ref (i.e. the
receiving end did not have another push from sideways that would be
discarded by our force-pushing), but didn't expose this possibility
to the users. It does so now.
* jk/push-force-with-lease-creation:
t5533: make it pass on case-sensitive filesystems
push: allow pushing new branches with --force-with-lease
push: add shorthand for --force-with-lease branch creation
Documentation/git-push: fix placeholder formatting
FreeBSD can lie when asked mtime of a directory, which made the
untracked cache code to fall back to a slow-path, which in turn
caused tests in t7063 to fail because it wanted to verify the
behaviour of the fast-path.
* nd/fbsd-lazy-mtime:
t7063: work around FreeBSD's lazy mtime update feature
Windows port was failing some tests in t4130, due to the lack of
inum in the returned values by its lstat(2) emulation.
* js/t4130-rename-without-ino:
t4130: work around Windows limitation
"git -c grep.patternType=extended log --basic-regexp" misbehaved
because the internal API to access the grep machinery was not
designed well.
* jc/grep-commandline-vs-configuration:
grep: further simplify setting the pattern type
There is an optimization used in "git diff $treeA $treeB" to borrow
an already checked-out copy in the working tree when it is known to
be the same as the blob being compared, expecting that open/mmap of
such a file is faster than reading it from the object store, which
involves inflating and applying delta. This however kicked in even
when the checked-out copy needs to go through the convert-to-git
conversion (including the clean filter), which defeats the whole
point of the optimization. The optimization has been disabled when
the conversion is necessary.
* jk/diff-do-not-reuse-wtf-needs-cleaning:
diff: do not reuse worktree files that need "clean" conversion
"git status" learned to suggest "merge --abort" during a conflicted
merge, just like it already suggests "rebase --abort" during a
conflicted rebase.
* mm/status-suggest-merge-abort:
status: suggest 'git merge --abort' when appropriate
On OSX `wc` prefixes the output of numbers with whitespace, such
that the `commit_count` would be "SP <NUMBER>". When using that in
git submodule update --init --depth=$commit_count
the depth would be empty and the number is interpreted as the
pathspec. Fix this by not using `wc` and rather instruct rev-list
to count.
Another way to fix this is to remove the `=` sign after the
`--depth` argument as then we are allowed to have more than just one
whitespace between `--depth` and the actual number. Prefer the
solution of rev-list counting as that is expected to be slightly
faster and more self-contained within Git.
Reported-by: Lars Schneider <larsxschneider@gmail.com>
Helped-by: Junio C Hamano <gitster@pobox.com>,
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The build procedure learned PAGER_ENV knob that lists what default
environment variable settings to export for popular pagers. This
mechanism is used to tweak the default settings to MORE on FreeBSD.
* ew/build-time-pager-tweaks:
pager: move pager-specific setup into the build
FreeBSD can lie when asked mtime of a directory, which made the
untracked cache code to fall back to a slow-path, which in turn
caused tests in t7063 to fail because it wanted to verify the
behaviour of the fast-path.
* nd/fbsd-lazy-mtime:
t7063: work around FreeBSD's lazy mtime update feature
An entry "git log --decorate" for the tip of the current branch is
shown as "HEAD -> name" (where "name" is the name of the branch);
paint the arrow in the same color as "HEAD", not in the color for
commits.
* nd/log-decorate-color-head-arrow:
log: decorate HEAD -> branch with the same color for arrow and HEAD
The t3700 test about "add --chmod=-x" have been made a bit more
robust and generally cleaned up.
* ib/t3700-add-chmod-x-updates:
t3700: add a test_mode_in_index helper function
t3700: merge two tests into one
t3700: remove unwanted leftover files before running new tests
"git pack-objects" has a few options that tell it not to pack
objects found in certain packfiles, which require it to scan .idx
files of all available packs. The codepaths involved in these
operations have been optimized for a common case of not having any
non-local pack and/or any .kept pack.
* jk/pack-objects-optim:
pack-objects: compute local/ignore_pack_keep early
pack-objects: break out of want_object loop early
find_pack_entry: replace last_found_pack with MRU cache
add generic most-recently-used list
sha1_file: drop free_pack_by_name
t/perf: add tests for many-pack scenarios
"git difftool <paths>..." started in a subdirectory failed to
interpret the paths relative to that directory, which has been
fixed.
* jk/difftool-in-subdir:
difftool: use Git::* functions instead of passing around state
difftool: avoid $GIT_DIR and $GIT_WORK_TREE
difftool: fix argument handling in subdirs
The reflog output format is documented better, and a new format
--date=unix to report the seconds-since-epoch (without timezone)
has been added.
* jk/reflog-date:
date: clarify --date=raw description
date: add "unix" format
date: document and test "raw-local" mode
doc/pretty-formats: explain shortening of %gd
doc/pretty-formats: describe index/time formats for %gd
doc/rev-list-options: explain "-g" output formats
doc/rev-list-options: clarify "commit@{Nth}" for "-g" option
Tests for "git svn" have been taught to reuse the lib-httpd test
infrastructure when testing the subversion integration that
interacts with subversion repositories served over the http://
protocol.
* ew/git-svn-http-tests:
git svn: migrate tests to use lib-httpd
t/t91*: do not say how to avoid the tests
Windows port was failing some tests in t4130, due to the lack of
inum in the returned values by its lstat(2) emulation.
* js/t4130-rename-without-ino:
t4130: work around Windows limitation
Code cleanup.
* rs/submodule-config-code-cleanup:
submodule-config: fix test binary crashing when no arguments given
submodule-config: combine early return code into one goto
submodule-config: passing name reference for .gitmodule blobs
submodule-config: use explicit empty string instead of strbuf in config_from()
Build clean-up.
* nd/test-helpers:
t/test-lib.sh: fix running tests with --valgrind
Makefile: use VCSSVN_LIB to refer to svn library
Makefile: drop extra dependencies for test helpers
"git pack-objects" and "git index-pack" mostly operate with off_t
when talking about the offset of objects in a packfile, but there
were a handful of places that used "unsigned long" to hold that
value, leading to an unintended truncation.
* nd/pack-ofs-4gb-limit:
fsck: use streaming interface for large blobs in pack
pack-objects: do not truncate result in-pack object size on 32-bit systems
index-pack: correct "offset" type in unpack_entry_data()
index-pack: report correct bad object offsets even if they are large
index-pack: correct "len" type in unpack_data()
sha1_file.c: use type off_t* for object_info->disk_sizep
pack-objects: pass length to check_pack_crc() without truncation
An age old bug that caused "git diff --ignore-space-at-eol"
misbehave has been fixed.
* js/ignore-space-at-eol:
diff: fix a double off-by-one with --ignore-space-at-eol
diff: demonstrate a bug with --patience and --ignore-space-at-eol
"git fetch http://user:pass@host/repo..." scrubbed the userinfo
part, but "git push" didn't.
* jk/push-scrub-url:
t5541: fix url scrubbing test when GPG is not set
push: anonymize URL in status output
"git add -N dir/file && git write-tree" produced an incorrect tree
when there are other paths in the same directory that sorts after
"file".
* nd/cache-tree-ita:
cache-tree: do not generate empty trees as a result of all i-t-a subentries
cache-tree.c: fix i-t-a entry skipping directory updates sometimes
test-lib.sh: introduce and use $EMPTY_BLOB
test-lib.sh: introduce and use $EMPTY_TREE
"git blame file" allowed the lineage of lines in the uncommitted,
unadded contents of "file" to be inspected, but it refused when
"file" did not appear in the current commit. When "file" was
created by renaming an existing file (but the change has not been
committed), this restriction was unnecessarily tight.
* mh/blame-worktree:
t/t8003-blame-corner-cases.sh: Use here documents
blame: allow to blame paths freshly added to the index
Update --porcelain argument to take optional version parameter
to allow multiple porcelain formats to be supported in the future.
The token "v1" is the default value and indicates the traditional
porcelain format. (The token "1" is an alias for that.)
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git -c grep.patternType=extended log --basic-regexp" misbehaved
because the internal API to access the grep machinery was not
designed well.
* jc/grep-commandline-vs-configuration:
grep: further simplify setting the pattern type
Allowing PAGER_ENV to be set at build-time allows us to move
pager-specific knowledge out of our build. This allows us to
set a better default for FreeBSD more(1), which pretends not to
understand ANSI color escapes if the MORE environment variable
is left empty, but accepts the same variables as less(1)
Originally-from:
https://public-inbox.org/git/xmqq61piw4yf.fsf@gitster.dls.corp.google.com/
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Eric Wong <e@80x24.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The newly-added test case wants to commit a file "c.t" (note the lower
case) when a previous test case already committed a file "C.t". This
confuses Git to the point that it thinks "c.t" was not staged when "git
add c.t" was called.
Simply make the naming of the test commits consistent with the previous
test cases: use upper-case, and advance in the alphabet.
This came up in local work to rebase the Windows-specific patches to the
current `next` branch. An identical fix was suggested by John Keeping.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Let's start with the commit message of [1] from freebsd.git [2]
Sync timestamp changes for inodes of special files to disk as late
as possible (when the inode is reclaimed). Temporarily only do
this if option UFS_LAZYMOD configured and softupdates aren't
enabled. UFS_LAZYMOD is intentionally left out of
/sys/conf/options.
This is mainly to avoid almost useless disk i/o on battery powered
machines. It's silly to write to disk (on the next sync or when
the inode becomes inactive) just because someone hit a key or
something wrote to the screen or /dev/null.
PR: 5577 [3]
The short version of that, in the context of t7063, is that when a
directory is updated, its mtime may be updated later, not
immediately. This can be shown with a simple command sequence
date; sleep 1; touch abc; rm abc; sleep 10; ls -lTd .
One would expect that the date shown in `ls` would be one second from
`date`, but it's 10 seconds later. If we put another `ls -lTd .` in
front of `sleep 10`, then the date of the last `ls` comes as
expected. The first `ls` somehow forces mtime to be updated.
t7063 is really sensitive to directory mtime. When mtime is too "new",
git code suspects racy timestamps and will not trigger the shortcut in
untracked cache, in t7063.24 and eventually be detected in t7063.27
We have two options thanks to this special FreeBSD feature:
1) Stop supporting untracked cache on FreeBSD. Skip t7063 entirely
when running on FreeBSD
2) Work around this problem (using the same 'ls' trick) and continue
to support untracked cache on FreeBSD
I initially wanted to go with 1) because I didn't know the exact
nature of this feature and feared that it would make untracked cache
work unreliably, using the cached version when it should not.
Since the behavior of this thing is clearer now. The picture is not
that bad. If this indeed happens often, untracked cache would assume
racy condition more often and _fall back_ to non-untracked cache code
paths. Which means it may be less effective, but it will not show
wrong things.
This patch goes with option 2.
PS. For those who want to look further in FreeBSD source code, this
flag is now called IN_LAZYMOD. I can see it's effective in ext2 and
ufs. zfs is not affected.
[1] 660e6408e6df99a20dacb070c5e7f9739efdf96d
[2] git://github.com/freebsd/freebsd.git
[3] https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=5577
Reported-by: Eric Wong <e@80x24.org>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Gerrit has a "superproject subscription" feature[1], that triggers a
commit in a superproject that is subscribed to its submodules.
Conceptually this Gerrit feature can be done on the client side with
Git via (except for raciness, error handling etc):
while [ true ]; do
git -C <superproject> submodule update --remote --force
git -C <superproject> commit -a -m "Update submodules"
git -C <superproject> push
done
for each branch in the superproject. To ease the configuration in Gerrit
a special value of "." has been introduced for the submodule.<name>.branch
to mean the same branch as the superproject[2], such that you can create a
new branch on both superproject and the submodule and this feature
continues to work on that new branch.
Now we find projects in the wild with such a .gitmodules file.
The .gitmodules used in these Gerrit projects do not conform
to Gits understanding of how .gitmodules should look like.
This teaches Git to deal gracefully with this syntax as well.
The redefinition of "." does no harm to existing projects unaware of
this change, as "." is an invalid branch name in Git, so we do not
expect such projects to exist.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is an optimization used in "git diff $treeA $treeB" to borrow
an already checked-out copy in the working tree when it is known to
be the same as the blob being compared, expecting that open/mmap of
such a file is faster than reading it from the object store, which
involves inflating and applying delta. This however kicked in even
when the checked-out copy needs to go through the convert-to-git
conversion (including the clean filter), which defeats the whole
point of the optimization. The optimization has been disabled when
the conversion is necessary.
* jk/diff-do-not-reuse-wtf-needs-cleaning:
diff: do not reuse worktree files that need "clean" conversion
Code cleanup.
* rs/submodule-config-code-cleanup:
submodule-config: fix test binary crashing when no arguments given
submodule-config: combine early return code into one goto
submodule-config: passing name reference for .gitmodule blobs
submodule-config: use explicit empty string instead of strbuf in config_from()
"git status" learned to suggest "merge --abort" during a conflicted
merge, just like it already suggests "rebase --abort" during a
conflicted rebase.
* mm/status-suggest-merge-abort:
status: suggest 'git merge --abort' when appropriate
"git push" learned to accept and pass extra options to the
receiving end so that hooks can read and react to them.
* sb/push-options:
add a test for push options
push: accept push options
receive-pack: implement advertising and receiving push options
push options: {pre,post}-receive hook learns about push options
On Windows, it is already pretty expensive to try to recreate the stat()
data that Git assumes is cheap to obtain. To make things halfway decent
in performance, we even have to skip emulating the inode and to
determine the number of hard links.
This is not a huge problem, usually, as either the size or the mtime or
the ctime are tell-tale enough to say when a file has changed, and even
if not, those changes are typically made after the index file was
written, triggering a rehashing of the files' contents.
The t4130-apply-criss-cross-rename test case, however, requires the
inode to determine that files of equal size were swapped, as renaming
files does not update their mtime. Every once in a while, t4130 fails
on Windows because of this missing piece.
Equal file sizes are not crucial for the test cases, however. Hence,
generate files with different sizes so that there is some property that
the swapped files can be discovered reliably even on Windows.
Helped-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When depth is given the user may have a reasonable expectation that
any remote operation is using the given depth. Add a test to demonstrate
we still get the desired sha1 even if the depth is too short to
include the actual commit.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The prior hard coded depth was chosen to be exactly the length from the
recorded gitlink to the tip of the remote, so if you add more commits
to the remote before, this test will not test its intention any more.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The case statement to check the file mode of a staged file appears
a number of times.
Simplify the test by utilizing a test_mode_in_index helper function.
Signed-off-by: Ingo Brückl <ib@wupperonline.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Depending on the underlying platform a chmod may be a noop. Although it
wouldn't harm the result of the '--chmod=-x' test, there is a more
robust way to make sure the --chmod option works both ways.
Merge the two separate tests for the --chmod option into one, checking
both permissions on the same file.
Signed-off-by: Ingo Brückl <ib@wupperonline.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When an earlier test that has prerequisite is skipped, files
used by later tests may be left in the working tree in an
unexpected state. For example, a test runs this sequence:
echo foo >xfoo1 && chmod 755 xfoo1
to create an executable file xfoo1, expecting that xfoo1
does not exist before it runs in the test sequence.
However, the absence of this file depends on "git reset
--hard" done in an earlier test, that is skipped when SANITY
prerequisite is not met, and worse yet, xfoo1 originally is
created as a symbolic link, which means the chmod does not
affect the modes of xfoo1 as this test expects.
Fix this by starting the test with "rm -f xfoo1" to make
sure the file is created from scratch, and do the same to
other similar tests.
Signed-off-by: Ingo Brückl <ib@wupperonline.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Replace uses of strbuf_addf() for adding strings with more lightweight
strbuf_addstr() calls.
In http-push.c it becomes easier to see what's going on without having
to verfiy that the definition of PROPFIND_ALL_REQUEST doesn't contain
any format specifiers.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This helps users who would prefer format-patch to default to --from,
and makes it easier to change the default in the future.
Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since the very inception of interactive-rebase in 1b1dce4
(Teach rebase an interactive mode, 2007-06-25), there has
been a preemptive check, before looking at any commits, to
see whether the user has a valid name/email combination.
This is convenient, because it means that we abort the
operation before even beginning (rather than just
complaining that we are unable to pick a particular commit).
However, it does the wrong thing when the rebase does not
actually need to generate any new commits (e.g., a
fast-forward with no commits to pick, or one where the base
stays the same, and we just pick the same commits without
rewriting anything). In this case it may complain about the
lack of ident, even though one would not be needed to
complete the operation.
This may seem like mere nit-picking, but because interactive
rebase underlies the "preserve-merges" rebase, somebody who
has set "pull.rebase" to "preserve" cannot make even a
fast-forward pull without a valid ident, as we bail before
even realizing the fast-forward nature.
This commit drops the extra ident check entirely. This means
we rely on individual commands that generate commit objects
to complain. So we will continue to notice and prevent cases
that actually do create commits, but with one important
difference: we fail while actually executing the "pick"
operations, and leave the rebase in a conflicted, half-done
state.
In some ways this is less convenient, but in some ways it is
more so; the user can then manually commit or even "git
rebase --continue" after setting up their ident (or
providing it as a one-off on the command line).
Reported-by: Dakota Hawkins <dakotahawkins@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git's pack storage does efficient (log n) lookups in a
single packfile's index, but if we have multiple packfiles,
we have to linearly search each for a given object. This
patch introduces some timing tests for cases where we have a
large number of packs, so that we can measure any
improvements we make in the following patches.
The main thing we want to time is object lookup. To do this,
we measure "git rev-list --objects --all", which does a
fairly large number of object lookups (essentially one per
object in the repository).
However, we also measure the time to do a full repack, which
is interesting for two reasons. One is that in addition to
the usual pack lookup, it has its own linear iteration over
the list of packs. And two is that because it it is the tool
one uses to go from an inefficient many-pack situation back
to a single pack, we care about its performance not only at
marginal numbers of packs, but at the extreme cases (e.g.,
if you somehow end up with 5,000 packs, it is the only way
to get back to 1 pack, so we need to make sure it performs
well).
We measure the performance of each command in three
scenarios: 1 pack, 50 packs, and 1,000 packs.
The 1-pack case is a baseline; any optimizations we do to
handle multiple packs cannot possibly perform better than
this.
The 50-pack case is as far as Git should generally allow
your repository to go, if you have auto-gc enabled with the
default settings. So this represents the maximum performance
improvement we would expect under normal circumstances.
The 1,000-pack case is hopefully rare, though I have seen it
in the wild where automatic maintenance was broken for some
time (and the repository continued to receive pushes). This
represents cases where we care less about general
performance, but want to make sure that a full repack
command does not take excessively long.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Environment variables are global and hard to reason about.
Use the `--git-dir` and `--work-tree` arguments when invoking `git`
instead of relying on the environment.
Add a test to ensure that difftool's dir-diff feature works when these
variables are present in the environment.
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 959b5455 (submodule: implement a config API for lookup of
.gitmodules values, 2015-08-18) implemented the initial version of the
submodule config cache. During development of that initial version we
extracted the function gitmodule_sha1_from_commit(). During that process
we missed that the strbuf rev was still used in config_from() and now is
left empty. Lets fix this by also returning this string.
This means that now when reading .gitmodules from revisions, the error
messages also contain a reference to the blob they are from.
Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net>
Reviewed-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A test that unconditionally used "mktemp" learned that the command
is not necessarily available everywhere.
* ak/lazy-prereq-mktemp:
t7610: test for mktemp before test execution
"git grep -i" has been taught to fold case in non-ascii locales
correctly.
* nd/icase:
grep.c: reuse "icase" variable
diffcore-pickaxe: support case insensitive match on non-ascii
diffcore-pickaxe: Add regcomp_or_die()
grep/pcre: support utf-8
gettext: add is_utf8_locale()
grep/pcre: prepare locale-dependent tables for icase matching
grep: rewrite an if/else condition to avoid duplicate expression
grep/icase: avoid kwsset when -F is specified
grep/icase: avoid kwsset on literal non-ascii strings
test-regex: expose full regcomp() to the command line
test-regex: isolate the bug test code
grep: break down an "if" stmt in preparation for next changes
The test framework learned a new helper test_match_signal to
check an exit code from getting killed by an expected signal.
* jk/test-match-signal:
t/lib-git-daemon: use test_match_signal
test_must_fail: use test_match_signal
t0005: use test_match_signal as appropriate
tests: factor portable signal check out of t0005
"git rebase -i --autostash" did not restore the auto-stashed change
when the operation was aborted.
* ps/rebase-i-auto-unstash-upon-abort:
rebase -i: restore autostash on abort
Git does not know what the contents in the index should be for a
path added with "git add -N" yet, so "git grep --cached" should not
show hits (or show lack of hits, with -L) in such a path, but that
logic does not apply to "git grep", i.e. searching in the working
tree files. But we did so by mistake, which has been corrected.
* nd/ita-cleanup:
grep: fix grepping for "intent to add" files
t7810-grep.sh: fix a whitespace inconsistency
t7810-grep.sh: fix duplicated test name
A helper function that takes the contents of a commit object and
finds its subject line did not ignore leading blank lines, as is
commonly done by other codepaths. Make it ignore leading blank
lines to match.
* js/find-commit-subject-ignore-leading-blanks:
reset --hard: skip blank lines when reporting the commit subject
sequencer: use skip_blank_lines() to find the commit subject
commit -C: skip blank lines at the beginning of the message
commit.c: make find_commit_subject() more robust
pretty: make the skip_blank_lines() function public
Add a test to specify the desired behaviour that currently is not
available in "git rebase -Xsubtree=...".
* dg/subtree-rebase-test:
contrib/subtree: Add a test for subtree rebase that loses commits
"git pack-objects" and "git index-pack" mostly operate with off_t
when talking about the offset of objects in a packfile, but there
were a handful of places that used "unsigned long" to hold that
value, leading to an unintended truncation.
* nd/pack-ofs-4gb-limit:
fsck: use streaming interface for large blobs in pack
pack-objects: do not truncate result in-pack object size on 32-bit systems
index-pack: correct "offset" type in unpack_entry_data()
index-pack: report correct bad object offsets even if they are large
index-pack: correct "len" type in unpack_data()
sha1_file.c: use type off_t* for object_info->disk_sizep
pack-objects: pass length to check_pack_crc() without truncation
"git worktree prune" protected worktrees that are marked as
"locked" by creating a file in a known location. "git worktree"
command learned a dedicated command pair to create and remove such
a file, so that the users do not have to do this with editor.
* nd/worktree-lock:
worktree.c: find_worktree() search by path suffix
worktree: add "unlock" command
worktree: add "lock" command
worktree.c: add is_worktree_locked()
worktree.c: add is_main_worktree()
worktree.c: add find_worktree()
A few tests that specifically target "git rebase -i" have been
added.
* js/rebase-i-tests:
rebase -i: we allow extra spaces after fixup!/squash!
rebase -i: demonstrate a bug with --autosquash
t3404: add a test for the --gpg-sign option
We already have "--date=raw", which is a Unix epoch
timestamp plus a contextual timezone (either the author's or
the local). But one may not care about the timezone and just
want the epoch timestamp by itself. It's not hard to parse
the two apart, but if you are using a pretty-print format,
you may want git to show the "finished" form that the user
will see.
We can accomodate this by adding a new date format, "unix",
which is basically "raw" without the timezone.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "raw" format shows a Unix epoch timestamp, but with a
timezone tacked on. The timestamp is not _in_ that zone, but
it is extra information about the time (by default, the zone
the author was in).
The documentation claims that "raw-local" does not work. It
does, but the end result is rather subtle. Let's describe it
in better detail, and test to make sure it works (namely,
the epoch time doesn't change, but the zone does).
While we are rewording the documentation in this area, let's
not use the phrase "does not work" for the remaining option,
"--date=relative". It's vague; do we accept it or not? We do
accept it, but it has no effect (which is a reasonable
outcome). We should also refer to the option not as
"--relative" (which is the historical synonym, and does not
take "-local" at all), but as "--date=relative".
Helped-by: Jakub Narębski <jnareb@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Our usual style in the test scripts is to indent here
documents with tabs, and use "<<-" to strip the tabs. The
result is easier to read.
This old test script did not do so in its inception, and
further tests added onto it followed the local style. Let's
bring it in line with our usual style.
Some of the tests actually care quite a bit about
whitespace, but none of them do so at the beginning of the
line (because they use things like qz_to_tab_space to avoid
depending on the literal whitespace), so we can do a fairly
mechanical conversion.
Most of the here-docs also use interpolation, so they have
been left as "<<-EOF". In a few cases, though, where
interpolation was not in use, I've converted them to
"<<-\EOF" to match our usual "don't interpolate unless you
need to" style.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test currently does something like:
do_one() &&
do_two() &&
test_expect_success ...
We generally avoid performing actions at the top-level of
the script (outside of a test_expect block) for two reasons:
1. The test harness is not checking and reporting if they
fail.
2. Their output is not handled correctly (not hidden by
default, nor shown with "-v").
Using &&-chains seems like it should help with (1), but it
doesn't. If either of the commands fails, we simply skip
running the follow-on test entirely, and the test harness
has no idea.
We can fix this by pushing that setup into its own block.
It _could_ go into the following test block, but since the
result in this case is used by multiple tests, it's more
clear to mark it explicitly as a distinct setup step.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If there is no upstream information for a branch, it is likely that it
is newly created and can safely be pushed under the normal fast-forward
rules. Relax the --force-with-lease check so that we do not reject
these branches immediately but rather attempt to push them as new
branches, using the null SHA-1 as the expected value.
In fact, it is already possible to push new branches using the explicit
--force-with-lease=<branch>:<expect> syntax, so all we do here is make
this behaviour the default if no explicit "expect" value is specified.
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow the empty string to stand in for the null SHA-1 when pushing a new
branch, like we do when deleting branches.
This means that the following command ensures that `new-branch` is
created on the remote (that is, is must not already exist):
git push --force-with-lease=new-branch: origin new-branch
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It was noticed by Brendan Forster last October that the builtin `git am`
regressed on that. Our hot fix reverted to spawning the recursive merge
instead of using it as a library function.
As we are about to revert that hot fix, after making the recursive merge a
true library function (i.e. a function that does not die() in case of
"normal" errors), let's add a test that verifies that we do not regress on
the same problem which made the hot fix necessary in the first place.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Skip tests when running under GETTEXT_POISON build and run them with
C_LOCALE_OUTPUT prerequisite.
These tests are irrelevant under GETTEXT_POISON because they test text
output alignment which GETTEXT_POISON turns useless.
Signed-off-by: Vasco Almeida <vascomalmeida@sapo.pt>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git blame file" allowed the lineage of lines in the uncommitted,
unadded contents of "file" to be inspected, but it refused when
"file" did not appear in the current commit. When "file" was
created by renaming an existing file (but the change has not been
committed), this restriction was unnecessarily tight.
* mh/blame-worktree:
t/t8003-blame-corner-cases.sh: Use here documents
blame: allow to blame paths freshly added to the index
When "git fsck" reports a broken link (e.g. a tree object contains
a blob that does not exist), both containing object and the object
that is referred to were reported with their 40-hex object names.
The command learned the "--name-objects" option to show the path to
the containing object from existing refs (e.g. "HEAD~24^2:file.txt").
* js/fsck-name-object:
fsck: optionally show more helpful info for broken links
fsck: give the error function a chance to see the fsck_options
fsck_walk(): optionally name objects on the go
fsck: refactor how to describe objects
"git add -N dir/file && git write-tree" produced an incorrect tree
when there are other paths in the same directory that sorts after
"file".
* nd/cache-tree-ita:
cache-tree: do not generate empty trees as a result of all i-t-a subentries
cache-tree.c: fix i-t-a entry skipping directory updates sometimes
test-lib.sh: introduce and use $EMPTY_BLOB
test-lib.sh: introduce and use $EMPTY_TREE
"git fetch http://user:pass@host/repo..." scrubbed the userinfo
part, but "git push" didn't.
* jk/push-scrub-url:
t5541: fix url scrubbing test when GPG is not set
push: anonymize URL in status output
Build clean-up.
* nd/test-helpers:
t/test-lib.sh: fix running tests with --valgrind
Makefile: use VCSSVN_LIB to refer to svn library
Makefile: drop extra dependencies for test helpers
"git merge" with renormalization did not work well with
merge-recursive, due to "safer crlf" conversion kicking in when it
shouldn't.
* jc/renormalize-merge-kill-safer-crlf:
merge: avoid "safer crlf" during recording of merge results
convert: unify the "auto" handling of CRLF
An age old bug that caused "git diff --ignore-space-at-eol"
misbehave has been fixed.
* js/ignore-space-at-eol:
diff: fix a double off-by-one with --ignore-space-at-eol
diff: demonstrate a bug with --patience and --ignore-space-at-eol
Error handling in the codepaths that updates refs has been
improved.
* mh/update-ref-errors:
lock_ref_for_update(): avoid a symref resolution
lock_ref_for_update(): make error handling more uniform
t1404: add more tests of update-ref error handling
t1404: document function test_update_rejected
t1404: remove "prefix" argument to test_update_rejected
t1404: rename file to t1404-update-ref-errors.sh
Further preparatory work on the refs API before the pluggable
backend series can land.
* mh/split-under-lock: (33 commits)
lock_ref_sha1_basic(): only handle REF_NODEREF mode
commit_ref_update(): remove the flags parameter
lock_ref_for_update(): don't resolve symrefs
lock_ref_for_update(): don't re-read non-symbolic references
refs: resolve symbolic refs first
ref_transaction_update(): check refname_is_safe() at a minimum
unlock_ref(): move definition higher in the file
lock_ref_for_update(): new function
add_update(): initialize the whole ref_update
verify_refname_available(): adjust constness in declaration
refs: don't dereference on rename
refs: allow log-only updates
delete_branches(): use resolve_refdup()
ref_transaction_commit(): correctly report close_ref() failure
ref_transaction_create(): disallow recursive pruning
refs: make error messages more consistent
lock_ref_sha1_basic(): remove unneeded local variable
read_raw_ref(): move docstring to header file
read_raw_ref(): improve docstring
read_raw_ref(): rename symref argument to referent
...
This allows us to use common test infrastructure and parallelize
the tests. For now, GIT_SVN_TEST_HTTPD=true needs to be set to
enable the SVN HTTP tests because we reuse the same test cases
for both file:// and http:// SVN repositories. SVN_HTTPD_PORT
is no longer honored.
Tested under Apache 2.2 and 2.4 on Debian 7.x (wheezy) and
8.x (jessie), respectively.
Cc: Clemens Buchacher <drizzd@aon.at>
Cc: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Eric Wong <e@80x24.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some of the tests "say" how to stop the svn tests from running, some do
not.
The test suite is directed at people reading t/README where we keep all
information about running the test suite (partly, with options etc.).
Remove said "say" occurences.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Eric Wong <e@80x24.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When c5c31d33 (grep: move pattern-type bits support to top-level
grep.[ch], 2012-10-03) introduced grep_commit_pattern_type() helper
function, the intention was to allow the users of grep API to having
to fiddle only with .pattern_type_option (which can be set to "fixed",
"basic", "extended", and "pcre"), and then immediately before compiling
the pattern strings for use, call grep_commit_pattern_type() to have
it prepare various bits in the grep_opt structure (like .fixed,
.regflags, etc.).
However, grep_set_pattern_type_option() helper function the grep API
internally uses were left as an external function by mistake. This
function shouldn't have been made callable by the users of the API.
Later when the grep API was used in revision traversal machinery,
the caller then mistakenly started calling the function around
34a4ae55 (log --grep: use the same helper to set -E/-F options as
"git grep", 2012-10-03), instead of setting the .pattern_type_option
field and letting the grep_commit_pattern_type() to take care of the
details.
This caused an unnecessary bug that made a configured
grep.patternType take precedence over the command line options
(e.g. --basic-regexp, --fixed-strings) in "git log" family of
commands.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Checking the version of the installed SVN libraries should not
require a git repository at all. This matches the behavior of
"git --version".
Add a test for "git svn help" for the same behavior while we're
at it, too.
Signed-off-by: Eric Wong <e@80x24.org>
When accessing a blob for a diff, we may try to reuse file
contents in the working tree, under the theory that it is
faster to mmap those file contents than it would be to
extract the content from the object database.
When we have to filter those contents, though, that
assumption does not hold. Even for our internal conversions
like CRLF, we have to allocate and fill a new buffer anyway.
But much worse, for external clean filters we have to exec
an arbitrary script, and we have no idea how expensive it
may be to run.
So let's skip this optimization when conversion into git's
"clean" form is required. This applies whenever the
"want_file" flag is false. When it's true, the caller
actually wants the smudged worktree contents, which the
reused file by definition already has (in fact, this is a
key optimization going the other direction, since reusing
the worktree file there lets us skip smudge filters).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We already suggest 'git rebase --abort' during a conflicted rebase.
Similarly, suggest 'git merge --abort' during conflict resolution on
'git merge'.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the GPG prereq is not set, we do not run test 34. That
test changes the directory of the test script as a side
effect (something we usually frown on, but which matches the
style of the rest of this script). When test 35 (the
url-scrubbing test) runs, it expects to be in the directory
from test 34. If it's not, the test fails; we are in a
different sub-repo, our test-commit is built on a different
history, and the push becomes a non-fast-forward.
We can fix this by unconditionally moving to the directory
we expect (again, against our usual style but matching how
the rest of the script operates).
As an additional protection, let's also switch from "make a
new commit and push to master" to just "push to a new
branch". We don't care about the branch name; we just want
_some_ ref update to trigger the status output. Pushing to a
new branch is less likely to run into problems with
force-updates, changing the checked-out branch, etc.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git p4" used a location outside $GIT_DIR/refs/ to place its
temporary branches, which has been moved to refs/git-p4-tmp/.
* ls/p4-tmp-refs:
git-p4: place temporary refs used for branch import under refs/git-p4-tmp
Improve the look of the way "git fetch" reports what happened to
each ref that was fetched.
* nd/fetch-ref-summary:
fetch: reduce duplicate in ref update status lines with placeholder
fetch: align all "remote -> local" output
fetch: change flag code for displaying tag update and deleted ref
fetch: refactor ref update status formatting code
git-fetch.txt: document fetch output
The test framework learned a new helper test_match_signal to
check an exit code from getting killed by an expected signal.
* jk/test-match-signal:
t/lib-git-daemon: use test_match_signal
test_must_fail: use test_match_signal
t0005: use test_match_signal as appropriate
tests: factor portable signal check out of t0005
There are certain house-keeping tasks that need to be performed at
the very beginning of any Git program, and programs that are not
built-in commands had to do them exactly the same way as "git"
potty does. It was easy to make mistakes in one-off standalone
programs (like test helpers). A common "main()" function that
calls cmd_main() of individual program has been introduced to
make it harder to make mistakes.
* jk/common-main:
mingw: declare main()'s argv as const
common-main: call git_setup_gettext()
common-main: call restore_sigpipe_to_default()
common-main: call sanitize_stdfds()
common-main: call git_extract_argv0_path()
add an extra level of indirection to main()
A test that unconditionally used "mktemp" learned that the command
is not necessarily available everywhere.
* ak/lazy-prereq-mktemp:
t7610: test for mktemp before test execution
"git grep -i" has been taught to fold case in non-ascii locales
correctly.
* nd/icase:
grep.c: reuse "icase" variable
diffcore-pickaxe: support case insensitive match on non-ascii
diffcore-pickaxe: Add regcomp_or_die()
grep/pcre: support utf-8
gettext: add is_utf8_locale()
grep/pcre: prepare locale-dependent tables for icase matching
grep: rewrite an if/else condition to avoid duplicate expression
grep/icase: avoid kwsset when -F is specified
grep/icase: avoid kwsset on literal non-ascii strings
test-regex: expose full regcomp() to the command line
test-regex: isolate the bug test code
grep: break down an "if" stmt in preparation for next changes
The commands in the "log/diff" family have had an FILE* pointer in the
data structure they pass around for a long time, but some codepaths
used to always write to the standard output. As a preparatory step
to make "git format-patch" available to the internal callers, these
codepaths have been updated to consistently write into that FILE*
instead.
* js/log-to-diffopt-file:
mingw: fix the shortlog --output=<file> test
diff: do not color output when --color=auto and --output=<file> is given
t4211: ensure that log respects --output=<file>
shortlog: respect the --output=<file> setting
format-patch: use stdout directly
format-patch: avoid freopen()
format-patch: explicitly switch off color when writing to files
shortlog: support outputting to streams other than stdout
graph: respect the diffopt.file setting
line-log: respect diffopt's configured output file stream
log-tree: respect diffopt's configured output file stream
log: prepare log/log-tree to reuse the diffopt.close_file attribute
When reporting broken links between commits/trees/blobs, it would be
quite helpful at times if the user would be told how the object is
supposed to be reachable.
With the new --name-objects option, git-fsck will try to do exactly
that: name the objects in a way that shows how they are reachable.
For example, when some reflog got corrupted and a blob is missing that
should not be, the user might want to remove the corresponding reflog
entry. This option helps them find that entry: `git fsck` will now
report something like this:
broken link from tree b5eb6ff... (refs/stash@{<date>}~37:)
to blob ec5cf80...
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Somehow, this test was using:
{
echo A
echo B
} > file
block to feed file contents. This changes those to the form most common
in git test scripts:
cat >file <<-\EOF
A
B
EOF
Signed-off-by: Mike Hommey <mh@glandium.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When blaming files, changes in the work tree are taken into account
and displayed as being "Not Committed Yet".
However, when blaming a file that is not known to the current HEAD,
git blame fails with `no such path 'foo' in HEAD`, even when the file
was git add'ed.
Allowing such a blame is useful when the new file added to the index
(not yet committed) was created by renaming an existing file. It
also is useful when the new file was created from pieces already in
HEAD, moved or copied from other files and blaming with copy
detection (i.e. "-C").
Signed-off-by: Mike Hommey <mh@glandium.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a subdirectory contains nothing but i-t-a entries, we generate an
empty tree object and add it to its parent tree. Which is wrong. Such
a subdirectory should not be added.
Note that this has a cascading effect. If subdir 'a/b/c' contains
nothing but i-t-a entries, we ignore it. But then if 'a/b' contains
only (the non-existing) 'a/b/c', then we should ignore 'a/b' while
building 'a' too. And it goes all the way up to top directory.
Noticed-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 3cf773e (cache-tree: fix writing cache-tree when CE_REMOVE is
present - 2012-12-16) skips i-t-a entries when building trees objects
from the index. Unfortunately it may skip too much.
The code in question checks if an entry is an i-t-a one, then no tree
entry will be written. But it does not take into account that
directories can also be written with the same code. Suppose we have
this in the index.
a-file
subdir/file1
subdir/file2
subdir/file3
the-last-file
We write an entry for a-file as normal and move on to subdir/file1,
where we realize the entry name for this level is simply just
"subdir", write down an entry for "subdir" then jump three items ahead
to the-last-file.
That is what happens normally when the first file in subdir is not an
i-t-a entry. If subdir/file1 is an i-t-a, because of the broken
condition in this code, we still think "subdir" is an i-t-a file and
not writing "subdir" down and jump to the-last-file. The result tree
now only has two items: a-file and the-last-file. subdir should be
there too (even though it only records two sub-entries, file2 and
file3).
If the i-t-a entry is subdir/file2 or subdir/file3, this is not a
problem because we jump over them anyway. Which may explain why the
bug is hidden for nearly four years.
Fix it by making sure we only skip i-t-a entries when the entry in
question is actual an index entry, not a directory.
Reported-by: Yuri Kanivetsky <yuri.kanivetsky@gmail.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
