The prereleaseSuffix feature of version comparison that is used in
"git tag -l" did not correctly when two or more prereleases for the
same release were present (e.g. when 2.0, 2.0-beta1, and 2.0-beta2
are there and the code needs to compare 2.0-beta1 and 2.0-beta2).
* sg/fix-versioncmp-with-common-suffix:
versioncmp: generalize version sort suffix reordering
versioncmp: factor out helper for suffix matching
versioncmp: use earliest-longest contained suffix to determine sorting order
versioncmp: cope with common part overlapping with prerelease suffix
versioncmp: pass full tagnames to swap_prereleases()
t7004-tag: add version sort tests to show prerelease reordering issues
t7004-tag: use test_config helper
t7004-tag: delete unnecessary tags with test_when_finished
"git diff" learned diff.interHunkContext configuration variable
that gives the default value for its --inter-hunk-context option.
* vn/diff-ihc-config:
diff: add interhunk context config option
Tighten a test to avoid mistaking an extended ERE regexp engine as
a PRE regexp engine.
* jk/grep-e-could-be-extended-beyond-posix:
t7810: avoid assumption about invalid regex syntax
Retire long unused/unmaintained gitview from the contrib/ area.
* sb/remove-gitview:
doc: git-gui browser does not default to HEAD
doc: gitk: add the upstream repo location
doc: gitk: remove gitview reference
contrib: remove gitview
Adjust documentation to help AsciiDoctor render better while not
breaking the rendering done by AsciiDoc.
* js/asciidoctor-tweaks:
asciidoctor: fix user-manual to be built by `asciidoctor`
giteveryday: unbreak rendering with AsciiDoctor
"git mergetool" without any pathspec on the command line that is
run from a subdirectory became no-op in Git v2.11 by mistake, which
has been fixed.
* rh/mergetool-regression-fix:
mergetool: fix running in subdir when rerere enabled
mergetool: take the "-O" out of $orderfile
t7610: add test case for rerere+mergetool+subdir bug
t7610: spell 'git reset --hard' consistently
t7610: don't assume the checked-out commit
t7610: always work on a test-specific branch
t7610: delete some now-unnecessary 'git reset --hard' lines
t7610: run 'git reset --hard' after each test to clean up
t7610: don't rely on state from previous test
t7610: use test_when_finished for cleanup tasks
t7610: move setup code to the 'setup' test case
t7610: update branch names to match test number
rev-parse doc: pass "--" to rev-parse in the --prefix example
.mailmap: record canonical email for Richard Hansen
The implementation of "real_path()" was to go there with chdir(2)
and call getcwd(3), but this obviously wouldn't be usable in a
threaded environment. Rewrite it to manually resolve relative
paths including symbolic links in path components.
* bw/realpath-wo-chdir:
real_path: set errno when max number of symlinks is exceeded
real_path: prevent redefinition of MAXSYMLINKS
Typing ^C to pager, which usually does not kill it, killed Git and
took the pager down as a collateral damage in certain process-tree
structure. This has been fixed.
* jk/execv-dashed-external:
execv_dashed_external: wait for child on signal death
execv_dashed_external: stop exiting with negative code
execv_dashed_external: use child_process struct
Running "git add a/b" when "a" is a submodule correctly errored
out, but without a meaningful error message.
* sb/pathspec-errors:
pathspec: give better message for submodule related pathspec error
Code clean-up in the pathspec API.
* bw/pathspec-cleanup:
pathspec: rename prefix_pathspec to init_pathspec_item
pathspec: small readability changes
pathspec: create strip submodule slash helpers
pathspec: create parse_element_magic helper
pathspec: create parse_long_magic function
pathspec: create parse_short_magic function
pathspec: factor global magic into its own function
pathspec: simpler logic to prefix original pathspec elements
pathspec: always show mnemonic and name in unsupported_magic
pathspec: remove unused variable from unsupported_magic
pathspec: copy and free owned memory
pathspec: remove the deprecated get_pathspec function
ls-tree: convert show_recursive to use the pathspec struct interface
dir: convert fill_directory to use the pathspec struct interface
dir: remove struct path_simplify
mv: remove use of deprecated 'get_pathspec()'
"git push \\server\share\dir" has recently regressed and then
fixed. A test has retroactively been added for this breakage.
* js/mingw-test-push-unc-path:
mingw: add a regression test for pushing to UNC paths
"git <cmd> @{push}" on a detached HEAD used to segfault; it has
been corrected to error out with a message.
* km/branch-get-push-while-detached:
branch_get_push: do not segfault when HEAD is detached
"git rebase -i" with a recent update started showing an incorrect
count when squashing more than 10 commits.
* jk/rebase-i-squash-count-fix:
rebase--interactive: count squash commits above 10 correctly
"git blame --porcelain" misidentified the "previous" <commit, path>
pair (aka "source") when contents came from two or more files.
* jk/blame-fixes:
blame: output porcelain "previous" header for each file
blame: handle --no-abbrev
blame: fix alignment with --abbrev=40
"git archive" did not read the standard configuration files, and
failed to notice a file that is marked as binary via the userdiff
driver configuration.
* jk/archive-zip-userdiff-config:
archive-zip: load userdiff config
It is natural that "git gc --auto" may not attempt to pack
everything into a single pack, and there is no point in warning
when the user has configured the system to use the pack bitmap,
leading to disabling further "gc".
* dt/disable-bitmap-in-auto-gc:
repack: die on incremental + write-bitmap-index
auto gc: don't write bitmaps for incremental repacks
A recent updates to "git p4" was not usable for older p4 but it
could be made to work with minimum changes. Do so.
* ls/p4-retry-thrice:
git-p4: do not pass '-r 0' to p4 commands
"git rm" used to refuse to remove a submodule when it has its own
git repository embedded in its working tree. It learned to move
the repository away to $GIT_DIR/modules/ of the superproject
instead, and allow the submodule to be deleted (as long as there
will be no loss of local modifications, that is).
* sb/submodule-rm-absorb:
rm: absorb a submodules git dir before deletion
submodule: rename and add flags to ok_to_remove_submodule
submodule: modernize ok_to_remove_submodule to use argv_array
submodule.h: add extern keyword to functions
"git grep" has been taught to optionally recurse into submodules.
* bw/grep-recurse-submodules:
grep: search history of moved submodules
grep: enable recurse-submodules to work on <tree> objects
grep: optionally recurse into submodules
grep: add submodules as a grep source type
submodules: load gitmodules file from commit sha1
submodules: add helper to determine if a submodule is initialized
submodules: add helper to determine if a submodule is populated
real_path: canonicalize directory separators in root parts
real_path: have callers use real_pathdup and strbuf_realpath
real_path: create real_pathdup
real_path: convert real_path_internal to strbuf_realpath
real_path: resolve symlinks by hand
* 'master' of git://ozlabs.org/~paulus/gitk:
gitk: Remove translated message from comments
gitk: ru.po: Update Russian translation
gitk: Update copyright notice to 2016
gitk: Clear array 'commitinfo' on reload
gitk: Remove closed file descriptors from $blobdifffd
gitk: Turn off undo manager in the text widget
gitk: Fix Japanese translation for "marked commit"
gitk: Fix missing commits when using -S or -G
gitk: Use explicit RGB green instead of "lime"
gitk: Add Portuguese translation
gitk: Makefile: create install bin directory
gitk: Include commit title in branch dialog
gitk: Allow checking out a remote branch
gitk: Add a 'rename' option to the branch context menu
"make update-po" fails because a previously untranslated string
has now been translated:
Updating po/sv.po
po/sv.po:1388: duplicate message definition...
po/sv.po:380: ...this is the location of the first definition
Remove the duplicate message definition.
Reported-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Code cleanup to avoid using redundant refspecs while fetching with
the --tags option.
* jt/fetch-no-redundant-tag-fetch-map:
fetch: do not redundantly calculate tag refmap
* kh/tutorial-grammofix:
doc: omit needless "for"
doc: make the intent of sentence clearer
doc: add verb in front of command to run
doc: add articles (grammar)
When the http server gives an incomplete response to a smart-http
rpc call, it could lead to client waiting for a full response that
will never come. Teach the client side to notice this condition
and abort the transfer.
An improvement counterproposal has failed.
cf. <20161114194049.mktpsvgdhex2f4zv@sigill.intra.peff.net>
* dt/smart-http-detect-server-going-away:
upload-pack: optionally allow fetching any sha1
remote-curl: don't hang when a server dies before any output
A potential but unlikely buffer overflow in Windows port has been
fixed.
* mk/mingw-winansi-ttyname-termination-fix:
mingw: consider that UNICODE_STRING::Length counts bytes
"git p4" that tracks multile p4 paths imported a single changelist
that touches files in these multiple paths as one commit, followed
by many empty commits. This has been fixed.
* gv/p4-multi-path-commit-fix:
git-p4: fix multi-path changelist empty commits
Even though an fix was attempted in Git 2.9.3 days, but running
"git difftool --dir-diff" from a subdirectory never worked. This
has been fixed.
* jk/difftool-in-subdir:
difftool: rename variables for consistency
difftool: chdir as early as possible
difftool: sanitize $workdir as early as possible
difftool: fix dir-diff index creation when in a subdirectory
