It turns out "git clone" over rsync transport has been broken when
the source repository has packed references for a long time, and
nobody noticed nor complained about it.
* jk/drop-rsync-transport:
transport: drop support for git-over-rsync
Add the http.pinnedpubkey configuration option for public key
pinning. It allows any string supported by libcurl --
base64(sha256(pubkey)) or filename of the full public key.
If cURL does not support pinning (is too old) output a warning to the
user.
Signed-off-by: Christoph Egger <christoph@christoph-egger.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Performing GSS-Negotiate authentication using Kerberos does not require
specifying a username or password, since that information is already
included in the ticket itself. However, libcurl refuses to perform
authentication if it has not been provided with a username and password.
Add an option, http.emptyAuth, that provides libcurl with an empty
username and password to make it attempt authentication anyway.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It used to be that:
git config --global user.email "(none)"
was a viable way for people to force themselves to set user.email in
each repository. This was helpful for people with more than one
email address, targeting different email addresses for different
clones, as it barred git from creating a commit unless the user.email
config was set in the per-repo config to the correct email address.
A recent change, 19ce497c (ident: keep a flag for bogus
default_email, 2015-12-10), however, declared that an explicitly
configured user.email is not bogus, no matter what its value is, so
this hack no longer works.
Provide the same functionality by adding a new configuration
variable user.useConfigOnly; when this variable is set, the
user must explicitly set user.email configuration.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Dan Aloni <alonid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
New http.proxyAuthMethod configuration variable can be used to
specify what authentication method to use, as a way to work around
proxies that do not give error response expected by libcurl when
CURLAUTH_ANY is used. Also, the codepath for proxy authentication
has been taught to use credential API to store the authentication
material in user's keyrings.
* kf/http-proxy-auth-methods:
http: use credential API to handle proxy authentication
http: allow selection of proxy authentication method
The git-over-rsync protocol is inefficient and broken, and
has been for a long time. It transfers way more objects than
it needs (grabbing all of the remote's "objects/",
regardless of which objects we need). It does its own ad-hoc
parsing of loose and packed refs from the remote, but
doesn't properly override packed refs with loose ones,
leading to garbage results (e.g., expecting the other side
to have an object pointed to by a stale packed-refs entry,
or complaining that the other side has two copies of the
refs[1]).
This latter breakage means that nobody could have
successfully pulled from a moderately active repository
since cd547b4 (fetch/push: readd rsync support, 2007-10-01).
We never made an official deprecation notice in the release
notes for git's rsync protocol, but the tutorial has marked
it as such since 914328a (Update tutorial., 2005-08-30).
And on the mailing list as far back as Oct 2005, we can find
Junio mentioning it as having "been deprecated for quite
some time."[2,3,4]. So it was old news then; cogito had
deprecated the transport in July of 2005[5] (though it did
come back briefly when Linus broke git-http-pull!).
Of course some people professed their love of rsync through
2006, but Linus clarified in his usual gentle manner[6]:
> Thanks! This is why I still use rsync, even though
> everybody and their mother tells me "Linus says rsync is
> deprecated."
No. You're using rsync because you're actively doing
something _wrong_.
The deprecation sentiment was reinforced in 2008, with a
mention that cloning via rsync is broken (with no fix)[7].
Even the commit porting rsync over to C from shell (cd547b4)
lists it as deprecated! So between the 10 years of informal
warnings, and the fact that it has been severely broken
since 2007, it's probably safe to simply remove it without
further deprecation warnings.
[1] http://article.gmane.org/gmane.comp.version-control.git/285101
[2] http://article.gmane.org/gmane.comp.version-control.git/10093
[3] http://article.gmane.org/gmane.comp.version-control.git/17734
[4] http://article.gmane.org/gmane.comp.version-control.git/18911
[5] http://article.gmane.org/gmane.comp.version-control.git/5617
[6] http://article.gmane.org/gmane.comp.version-control.git/19354
[7] http://article.gmane.org/gmane.comp.version-control.git/103635
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we know that mtime on directory as given by the environment
is usable for the purpose of untracked cache, we may want the
untracked cache to be always used without any mtime test or
kernel name check being performed.
Also when we know that mtime is not usable for the purpose of
untracked cache, for example because the repo is shared over a
network file system, we may want the untracked-cache to be
automatically removed from the index.
Allow the user to express such preference by setting the
'core.untrackedCache' configuration variable, which can take
'keep', 'false', or 'true' and default to 'keep'.
When read_index_from() is called, it now adds or removes the
untracked cache in the index to respect the value of this
variable. So it does nothing if the value is `keep` or if the
variable is unset; it adds the untracked cache if the value is
`true`; and it removes the cache if the value is `false`.
`git update-index --[no-|force-]untracked-cache` still adds the
untracked cache to, or removes it, from the index, but this
shows a warning if it goes against the value of
core.untrackedCache, because the next time the index is read
the untracked cache will be added or removed if the
configuration is set to do so.
Also `--untracked-cache` used to check that the underlying
operating system and file system change `st_mtime` field of a
directory if files are added or deleted in that directory. But
because those tests take a long time, `--untracked-cache` no
longer performs them. Instead, there is now
`--test-untracked-cache` to perform the tests. This change
makes `--untracked-cache` the same as `--force-untracked-cache`.
This last change is backward incompatible and should be
mentioned in the release notes.
Helped-by: Duy Nguyen <pclouds@gmail.com>
Helped-by: Torsten Bögershausen <tboegi@web.de>
Helped-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
read-cache: Duy'sfixup
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git format-patch" learned to notice format.outputDirectory
configuration variable. This allows "-o <dir>" option to be
omitted on the command line if you always use the same directory in
your workflow.
* ak/format-patch-odir-config:
format-patch: introduce format.outputDirectory configuration
"git pull --rebase" has been extended to allow invoking
"rebase -i".
* js/pull-rebase-i:
completion: add missing branch.*.rebase values
remote: handle the config setting branch.*.rebase=interactive
pull: allow interactive rebase with --rebase=interactive
Currently, the only way to pass proxy credentials to curl is by including them
in the proxy URL. Usually, this means they will end up on disk unencrypted, one
way or another (by inclusion in ~/.gitconfig, shell profile or history). Since
proxy authentication often uses a domain user, credentials can be security
sensitive; therefore, a safer way of passing credentials is desirable.
If the configured proxy contains a username but not a password, query the
credential API for one. Also, make sure we approve/reject proxy credentials
properly.
For consistency reasons, add parsing of http_proxy/https_proxy/all_proxy
environment variables, which would otherwise be evaluated as a fallback by curl.
Without this, we would have different semantics for git configuration and
environment variables.
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Helped-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Knut Franke <k.franke@science-computing.de>
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
CURLAUTH_ANY does not work with proxies which answer unauthenticated requests
with a 307 redirect to an error page instead of a 407 listing supported
authentication methods. Therefore, allow the authentication method to be set
using the environment variable GIT_HTTP_PROXY_AUTHMETHOD or configuration
variables http.proxyAuthmethod and remote.<name>.proxyAuthmethod (in analogy
to http.proxy and remote.<name>.proxy).
The following values are supported:
* anyauth (default)
* basic
* digest
* negotiate
* ntlm
Signed-off-by: Knut Franke <k.franke@science-computing.de>
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Helped-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git grep" by default does not fall back to its "--no-index"
behaviour outside a directory under Git's control (otherwise the
user may by mistake end up running a huge recursive search); with a
new configuration (set in $HOME/.gitconfig--by definition this
cannot be set in the config file per project), this safety can be
disabled.
* tg/grep-no-index-fallback:
builtin/grep: add grep.fallbackToNoIndex config
t7810: correct --no-index test
A couple of years ago, I found the need to collaborate on topic
branches that were rebased all the time, and I really needed to see
what I was rebasing when pulling, so I introduced an
interactively-rebasing pull.
The way builtin pull works, this change also supports the value
'interactive' for the 'branch.<name>.rebase' config variable, which
is a neat thing because users can now configure given branches for
interactively-rebasing pulls without having to type out the complete
`--rebase=interactive` option every time they pull.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We can pass -o/--output-directory to the format-patch command to store
patches in some place other than the working directory. This patch
introduces format.outputDirectory configuration option for same
purpose.
The case of usage of this configuration option can be convenience
to not pass every time -o/--output-directory if an user has pattern
to store all patches in the /patches directory for example.
The format.outputDirectory has lower priority than command line
option, so if user will set format.outputDirectory and pass the
command line option, a result will be stored in a directory that
passed to command line option.
Signed-off-by: Alexander Kuleshov <kuleshovmail@gmail.com>
Signed-off-by: Stephen P. Smith <ischis2@cox.net>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git grep" can now be configured (or told from the command line)
how many threads to use when searching in the working tree files.
* vl/grep-configurable-threads:
grep: add --threads=<num> option and grep.threads configuration
grep: slight refactoring to the code that disables threading
grep: allow threading even on a single-core machine
Currently when git grep is used outside of a git repository without the
--no-index option git simply dies. For convenience, add a
grep.fallbackToNoIndex configuration variable. If set to true, git grep
behaves like git grep --no-index if it is run outside of a git
repository. It defaults to false, preserving the current behavior.
Helped-by: Jeff King <peff@peff.net>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add new config to avoid typing "--recurse-submodules" on each push.
* mc/push-recurse-submodules-config:
push: follow the "last one wins" convention for --recurse-submodules
push: test that --recurse-submodules on command line overrides config
push: add recurseSubmodules config option
"git grep" can now be configured (or told from the command line) how
many threads to use when searching in the working tree files.
Signed-off-by: Victor Leschuk <vleschuk@accesssoftek.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --recurse-submodules command line parameter has existed for some
time but it has no config file equivalent.
Following the style of the corresponding parameter for git fetch, let's
invent push.recurseSubmodules to provide a default for this
parameter. This also requires the addition of --recurse-submodules=no to
allow the configuration to be overridden on the command line when
required.
The most straightforward way to implement this appears to be to make
push use code in submodule-config in a similar way to fetch.
Signed-off-by: Mike Crowe <mac@mcrowe.com>
Signed-off-by: Jeff King <peff@peff.net>
Introduce new option "credentialCache.ignoreSIGHUP" which stops
git-credential-cache--daemon from quitting on SIGHUP. This is useful
when "git push" is started from Emacs, because all child
processes (including the daemon) will receive a SIGHUP when "git push"
exits.
Signed-off-by: Noam Postavsky <npostavs@users.sourceforge.net>
Signed-off-by: Jeff King <peff@peff.net>
In addition to matching stripped refs, one can now add hideRefs
patterns that the full (unstripped) ref is matched against. To
distinguish between stripped and full matches, those new patterns
must be prefixed with a circumflex (^).
This commit also removes support for the undocumented and unintended
hideRefs settings ".have" (suppressing all "have" lines) and
"capabilities^{}" (suppressing the capabilities line).
Signed-off-by: Lukas Fleischer <lfleischer@lfos.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Right now, there is no clear definition of how transfer.hideRefs should
behave when a namespace is set. Explain that hideRefs prefixes match
stripped names in that case. This is how hideRefs patterns are currently
handled in receive-pack.
Signed-off-by: Lukas Fleischer <lfleischer@lfos.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Description of the "log.follow" configuration variable in "git log"
documentation is now also copied to "git config" documentation.
* dt/log-follow-config:
log: Update log.follow doc and add to config.txt
Description of the "log.follow" configuration variable in "git log"
documentation is now also copied to "git config" documentation.
* dt/log-follow-config:
log: Update log.follow doc and add to config.txt
Documentation/config.txt does not include the documentation for
log.follow that is in Documentation/git-log.txt. This commit adds the
log.follow documentation to config.txt and also updates the wording to
be consistent with the format that is followed by other boolean
configuration variables.
Signed-off-by: Eric N. Vander Weele <ericvw@gmail.com>
Acked-by: David Turner <dturner@twopensource.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git log --date=local" used to only show the normal (default)
format in the local timezone. The command learned to take 'local'
as an instruction to use the local timezone with other formats,
e.g. "git show --date=rfc-local".
* jk/date-local:
t6300: add tests for "-local" date formats
t6300: make UTC and local dates different
date: make "local" orthogonal to date format
date: check for "local" before anything else
t6300: add test for "raw" date format
t6300: introduce test_date() helper
fast-import: switch crash-report date to iso8601
Documentation/rev-list: don't list date formats
Documentation/git-for-each-ref: don't list date formats
Documentation/config: don't list date formats
Documentation/blame-options: don't list date formats
Users who are too busy to type three extra keystrokes to ask for
"git stash show -p" can now set stash.showPatch configuration
varible to true to always see the actual patch, not just the list
of paths affected with feel for the extent of damage via diffstat.
* nk/stash-show-config:
stash: allow "stash show" diff output configurable
Don't format the second paragraph as a literal block.
Signed-off-by: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This list is already incomplete (missing "raw") and we're about to add
new formats. Since this option sets a default for git-log's --date
option, just refer to git-log(1).
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The client side codepaths in "git push" have been cleaned up
and the user can request to perform an optional "signed push",
i.e. sign only when the other end accepts signed push.
* db/push-sign-if-asked:
push: add a config option push.gpgSign for default signed pushes
push: support signing pushes iff the server supports it
builtin/send-pack.c: use parse_options API
config.c: rename git_config_maybe_bool_text and export it as git_parse_maybe_bool
transport: remove git_transport_options.push_cert
gitremote-helpers.txt: document pushcert option
Documentation/git-send-pack.txt: document --signed
Documentation/git-send-pack.txt: wrap long synopsis line
Documentation/git-push.txt: document when --signed may fail
"git notes merge" can be told with "--strategy=<how>" option how to
automatically handle conflicts; this can now be configured by
setting notes.mergeStrategy configuration variable.
* jk/notes-merge-config:
notes: teach git-notes about notes.<name>.mergeStrategy option
notes: add notes.mergeStrategy option to select default strategy
notes: add tests for --commit/--abort/--strategy exclusivity
notes: extract parse_notes_merge_strategy to notes-utils
notes: extract enum notes_merge_strategy to notes-utils.h
notes: document cat_sort_uniq rewriteMode
Some users might want to see diff (patch) output always rather than
diffstat when [s]he runs 'git stash show'. Although this can be
done with adding -p option, users are too lazy to type extra three
keys.
Add two variables that control to show diffstat and patch output
respectively. The stash.showStat is for diffstat and default is
true. The stat.showPatch is for the patch output and default is
false.
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A new configuration variable http.sslVersion can be used to specify
what specific version of SSL/TLS to use to make a connection.
* ep/http-configure-ssl-version:
http: add support for specifying the SSL version
Change <ref> to <pattern> in the description of
gc.*.reflogExpireUnreachable, since that is what the text refers to.
Signed-off-by: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A negative !ref entry in multi-value transfer.hideRefs
configuration can be used to say "don't hide this one".
* jk/negative-hiderefs:
refs: support negative transfer.hideRefs
docs/config.txt: reorder hideRefs config
Teach notes about a new "notes.<name>.mergeStrategy" option for
configuring the notes merge strategy when merging into
refs/notes/<name>. This option allows for the selection of merge
strategy for particular notes refs, rather than all notes ref merges, as
user may not want cat_sort_uniq for all refs, but only some. Note that
the <name> is the local reference we are merging into, not the remote
ref we merged from. The assumption is that users will mostly want to
configure separate local ref merge strategies rather than strategies
depending on which remote ref they merge from.
notes.<name>.mergeStrategy overrides the general behavior as it is more
specific.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach git-notes about "notes.mergeStrategy" to select a general strategy
for all notes merges. This enables a user to always get expected merge
strategy such as "cat_sort_uniq" without having to pass the "-s" option
manually.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach documentation about the cat_sort_uniq rewriteMode that got added
at the same time as the equivalent merge strategy.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach git about a new option, "http.sslVersion", which permits one
to specify the SSL version to use when negotiating SSL connections.
The setting can be overridden by the GIT_SSL_VERSION environment
variable.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "new-worktree-mode" hack in "checkout" that was added in
nd/multiple-work-trees topic has been removed by updating the
implementation of new "worktree add".
* es/worktree-add-cleanup: (25 commits)
Documentation/git-worktree: fix duplicated 'from'
Documentation/config: mention "now" and "never" for 'expire' settings
Documentation/git-worktree: fix broken 'linkgit' invocation
checkout: drop intimate knowledge of newly created worktree
worktree: populate via "git reset --hard" rather than "git checkout"
worktree: avoid resolving HEAD unnecessarily
worktree: make setup of new HEAD distinct from worktree population
worktree: detect branch-name/detached and error conditions locally
worktree: add_worktree: construct worktree-population command locally
worktree: elucidate environment variables intended for child processes
worktree: make branch creation distinct from worktree population
worktree: add: suppress auto-vivication with --detach and no <branch>
worktree: make --detach mutually exclusive with -b/-B
worktree: introduce options container
worktree: simplify new branch (-b/-B) option checking
worktree: improve worktree setup message
branch: publish die_if_checked_out()
checkout: teach check_linked_checkout() about symbolic link HEAD
checkout: check_linked_checkout: simplify symref parsing
checkout: check_linked_checkout: improve "already checked out" aesthetic
...
Remove remaining cruft from "git checkout --to", which
transitioned to "git worktree add".
* es/worktree-add:
config: rename "gc.pruneWorktreesExpire" to "gc.worktreePruneExpire"
Documentation/git-worktree: wordsmith worktree-related manpages
Documentation/config: fix stale "git prune --worktree" reference
Documentation/git-worktree: fix incorrect reference to file "locked"
Documentation/git-worktree: consistently use term "linked working tree"
If you hide a hierarchy of refs using the transfer.hideRefs
config, there is no way to later override that config to
"unhide" it. This patch implements a "negative" hide which
causes matches to immediately be marked as unhidden, even if
another match would hide it. We take care to apply the
matches in reverse-order from how they are fed to us by the
config machinery, as that lets our usual "last one wins"
config precedence work (and entries in .git/config, for
example, will override /etc/gitconfig).
So you can now do:
$ git config --system transfer.hideRefs refs/secret
$ git config transfer.hideRefs '!refs/secret/not-so-secret'
to hide refs/secret in all repos, except for one public bit
in one specific repo. Or you can even do:
$ git clone \
-u "git -c transfer.hiderefs="!refs/foo" upload-pack" \
remote:repo.git
to clone remote:repo.git, overriding any hiding it has
configured.
There are two alternatives that were considered and
rejected:
1. A generic config mechanism for removing an item from a
list. E.g.: (e.g., "[transfer] hideRefs -= refs/foo").
This is nice because it could apply to other
multi-valued config, as well. But it is not nearly as
flexible. There is no way to say:
[transfer]
hideRefs = refs/secret
hideRefs = refs/secret/not-so-secret
Having explicit negative specifications means we can
override previous entries, even if they are not the
same literal string.
2. Adding another variable to override some parts of
hideRefs (e.g., "exposeRefs").
This solves the problem from alternative (1), but it
cannot easily obey the normal config precedence,
because it would use two separate lists. For example:
[transfer]
hideRefs = refs/secret
exposeRefs = refs/secret/not-so-secret
hideRefs = refs/secret/not-so-secret/no-really-its-secret
With two lists, we have to apply the "expose" rules
first, and only then apply the "hide" rules. But that
does not match what the above config intends.
Of course we could internally parse that to a single
list, respecting the ordering, which saves us having to
invent the new "!" syntax. But using a single name
communicates to the user that the ordering _is_
important. And "!" is well-known for negation, and
should not appear at the beginning of a ref (it is
actually valid in a ref-name, but all entries here
should be fully-qualified, starting with "refs/").
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add the am.threeWay configuration variable to use the -3 or --3way
option of git am by default. When am.threeway is set and not desired
for a specific git am command, the --no-3way option can be used to
override it.
Signed-off-by: Remi Lespinet <remi.lespinet@ensimag.grenoble-inp.fr>
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add "drop commit-object-name subject" command as another way to
skip replaying of a commit in "rebase -i", and then punish those
who do not use it (and instead just remove the lines) by throwing
a warning.
* gr/rebase-i-drop-warn:
git rebase -i: add static check for commands and SHA-1
git rebase -i: warn about removed commits
git-rebase -i: add command "drop" to remove a commit
Allow ignoring fsck errors on specific set of known-to-be-bad
objects, and also tweaking warning level of various kinds of non
critical breakages reported.
* js/fsck-opt:
fsck: support ignoring objects in `git fsck` via fsck.skiplist
fsck: git receive-pack: support excluding objects from fsck'ing
fsck: introduce `git fsck --connectivity-only`
fsck: support demoting errors to warnings
fsck: document the new receive.fsck.<msg-id> options
fsck: allow upgrading fsck warnings to errors
fsck: optionally ignore specific fsck issues completely
fsck: disallow demoting grave fsck errors to warnings
fsck: add a simple test for receive.fsck.<msg-id>
fsck: make fsck_tag() warn-friendly
fsck: handle multiple authors in commits specially
fsck: make fsck_commit() warn-friendly
fsck: make fsck_ident() warn-friendly
fsck: report the ID of the error/warning
fsck (receive-pack): allow demoting errors to warnings
fsck: offer a function to demote fsck errors to warnings
fsck: provide a function to parse fsck message IDs
fsck: introduce identifiers for fsck messages
fsck: introduce fsck options
"git rebase -i"'s list of todo is made configurable.
* mr/rebase-i-customize-insn-sheet:
git-rebase--interactive.sh: add config option for custom instruction format
In addition to approxidate-style values ("2.months.ago", "yesterday"),
consumers of 'gc.*expire*' configuration variables also accept and
respect 'now' ("do it immediately") and 'never' ("suppress entirely").
Suggested-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The descriptions for receive.hideRefs and
uploadpack.hideRefs are largely the same, and then
transfer.hideRefs refers to both of them. Instead, let's
make transfer.hideRefs the "master" source, and refer to it
from the other sites (with appropriate program-specific
annotations).
This avoids duplication, and will make it easier to document
changes to the config option without having to copy and
paste the description in two places.
While we're at it, this fixes some bogus subject/verb
agreement in the original description.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This reverts commit d96a275b91.
It used to be possible to apply a patch series with "git am mbox"
and then only after seeing a failure, switch to three-way mode via
"git am -3" (no other options or arguments). The commit being
reverted broke this workflow.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As of df0b6cf (worktree: new place for "git prune --worktrees",
2015-06-29), linked worktree pruning functionality moved from
"git prune --worktrees" to "git worktree prune". Rename the
associated configuration variable accordingly.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
[es: reword .git/worktrees and .git/worktrees/<id>/locked descriptions]
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This should have been changed to "git worktree prune" by df0b6cf
(worktree: new place for "git prune --worktrees", 2015-06-29)
[es: reword commit message]
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Check if commits were removed (i.e. a line was deleted) and print
warnings or stop git rebase depending on the value of the
configuration variable rebase.missingCommitsCheck.
This patch gives the user the possibility to avoid silent loss of
information (losing a commit through deleting the line in this case)
if he wants.
Add the configuration variable rebase.missingCommitsCheck.
- When unset or set to "ignore", no checking is done.
- When set to "warn", the commits are checked, warnings are
displayed but git rebase still proceeds.
- When set to "error", the commits are checked, warnings are
displayed and the rebase is stopped.
(The user can then use 'git rebase --edit-todo' and
'git rebase --continue', or 'git rebase --abort')
rebase.missingCommitsCheck defaults to "ignore".
Signed-off-by: Galan Rémi <remi.galan-alfonso@ensimag.grenoble-inp.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"color.diff.plain" was a misnomer; give it 'color.diff.context' as
a more logical synonym.
* jk/color-diff-plain-is-context:
diff.h: rename DIFF_PLAIN color slot to DIFF_CONTEXT
diff: accept color.diff.context as a synonym for "plain"
Identical to support in `git receive-pack for the config option
`receive.fsck.skiplist`, we now support ignoring given objects in
`git fsck` via `fsck.skiplist` altogether.
This is extremely handy in case of legacy repositories where it would
cause more pain to change incorrect objects than to live with them
(e.g. a duplicate 'author' line in an early commit object).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The optional new config option `receive.fsck.skipList` specifies the path
to a file listing the names, i.e. SHA-1s, one per line, of objects that
are to be ignored by `git receive-pack` when `receive.fsckObjects = true`.
This is extremely handy in case of legacy repositories where it would
cause more pain to change incorrect objects than to live with them
(e.g. a duplicate 'author' line in an early commit object).
The intended use case is for server administrators to inspect objects
that are reported by `git push` as being too problematic to enter the
repository, and to add the objects' SHA-1 to a (preferably sorted) file
when the objects are legitimate, i.e. when it is determined that those
problematic objects should be allowed to enter the server.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We already have support in `git receive-pack` to deal with some legacy
repositories which have non-fatal issues.
Let's make `git fsck` itself useful with such repositories, too, by
allowing users to ignore known issues, or at least demote those issues
to mere warnings.
Example: `git -c fsck.missingEmail=ignore fsck` would hide
problems with missing emails in author, committer and tagger lines.
In the same spirit that `git receive-pack`'s usage of the fsck machinery
differs from `git fsck`'s – some of the non-fatal warnings in `git fsck`
are fatal with `git receive-pack` when receive.fsckObjects = true, for
example – we strictly separate the fsck.<msg-id> from the
receive.fsck.<msg-id> settings.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A config option 'rebase.instructionFormat' can override the
default 'oneline' format of the rebase instruction list.
Since the list is parsed using the left, right or boundary mark plus
the sha1, they are prepended to the instruction format.
Signed-off-by: Michael Rappazzo <rappazzo@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"color.diff.plain" was a misnomer; give it 'color.diff.context' as
a more logical synonym.
* jk/color-diff-plain-is-context:
diff.h: rename DIFF_PLAIN color slot to DIFF_CONTEXT
diff: accept color.diff.context as a synonym for "plain"
The pull.ff configuration was supposed to override the merge.ff
configuration, but it didn't.
* pt/pull-ff-vs-merge-ff:
pull: parse pull.ff as a bool or string
pull: make pull.ff=true override merge.ff
Various documentation mark-up fixes to make the output more
consistent in general and also make AsciiDoctor (an alternative
formatter) happier.
* jk/asciidoc-markup-fix:
doc: convert AsciiDoc {?foo} to ifdef::foo[]
doc: put example URLs and emails inside literal backticks
doc: drop backslash quoting of some curly braces
doc: convert \--option to --option
doc/add: reformat `--edit` option
doc: fix length of underlined section-title
doc: fix hanging "+"-continuation
doc: fix unquoted use of "{type}"
doc: fix misrendering due to `single quote'
Add the am.threeWay configuration variable to use the -3 or --3way
option of git am by default. When am.threeway is set and not desired
for a specific git am command, the --no-3way option can be used to
override it.
Signed-off-by: Remi Lespinet <remi.lespinet@ensimag.grenoble-inp.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git upload-pack" that serves "git fetch" can be told to serve
commits that are not at the tip of any ref, as long as they are
reachable from a ref, with uploadpack.allowReachableSHA1InWant
configuration variable.
* fm/fetch-raw-sha1:
upload-pack: optionally allow fetching reachable sha1
upload-pack: prepare to extend allow-tip-sha1-in-want
config.txt: clarify allowTipSHA1InWant with camelCase
The term "plain" is a bit ambiguous; let's allow the more
specific "context", but keep "plain" around for
compatibility.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The pull.ff configuration was supposed to override the merge.ff
configuration, but it didn't.
* pt/pull-ff-vs-merge-ff:
pull: parse pull.ff as a bool or string
pull: make pull.ff=true override merge.ff
With uploadpack.allowReachableSHA1InWant configuration option set on the
server side, "git fetch" can make a request with a "want" line that names
an object that has not been advertised (likely to have been obtained out
of band or from a submodule pointer). Only objects reachable from the
branch tips, i.e. the union of advertised branches and branches hidden by
transfer.hideRefs, will be processed. Note that there is an associated
cost of having to walk back the history to check the reachability.
This feature can be used when obtaining the content of a certain commit,
for which the sha1 is known, without the need of cloning the whole
repository, especially if a shallow fetch is used. Useful cases are e.g.
repositories containing large files in the history, fetching only the
needed data for a submodule checkout, when sharing a sha1 without telling
which exact branch it belongs to and in Gerrit, if you think in terms of
commits instead of change numbers. (The Gerrit case has already been
solved through allowTipSHA1InWant as every Gerrit change has a ref.)
Signed-off-by: Fredrik Medley <fredrik.medley@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of dying immediately upon failing to obtain a lock, retry
after a short while with backoff.
* mh/lockfile-retry:
lock_packed_refs(): allow retries when acquiring the packed-refs lock
lockfile: allow file locking to be retried with a timeout
Various documentation mark-up fixes to make the output more
consistent in general and also make AsciiDoctor (an alternative
formatter) happier.
* jk/asciidoc-markup-fix:
doc: convert AsciiDoc {?foo} to ifdef::foo[]
doc: put example URLs and emails inside literal backticks
doc: drop backslash quoting of some curly braces
doc: convert \--option to --option
doc/add: reformat `--edit` option
doc: fix length of underlined section-title
doc: fix hanging "+"-continuation
doc: fix unquoted use of "{type}"
doc: fix misrendering due to `single quote'
Introduce http.<url>.SSLCipherList configuration variable to tweak
the list of cipher suite to be used with libcURL when talking with
https:// sites.
* ls/http-ssl-cipher-list:
http: add support for specifying an SSL cipher list
Most of the options in config.txt are camelCase. Improve the readability
for allowtipsha1inwant by changing to allowTipSHA1InWant.
Signed-off-by: Fredrik Medley <fredrik.medley@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since b814da8 (pull: add pull.ff configuration, 2014-01-15), running
git-pull with the configuration pull.ff=false or pull.ff=only is
equivalent to passing --no-ff and --ff-only to git-merge. However, if
pull.ff=true, no switch is passed to git-merge. This leads to the
confusing behavior where pull.ff=false or pull.ff=only is able to
override merge.ff, while pull.ff=true is unable to.
Fix this by adding the --ff switch if pull.ff=true, and add a test to
catch future regressions.
Furthermore, clarify in the documentation that pull.ff overrides
merge.ff.
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Reviewed-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, there is only one attempt to acquire any lockfile, and if
the lock is held by another process, the locking attempt fails
immediately.
This is not such a limitation for loose reference files. First, they
don't take long to rewrite. Second, most reference updates have a
known "old" value, so if another process is updating a reference at
the same moment that we are trying to lock it, then probably the
expected "old" value will not longer be valid, and the update will
fail anyway.
But these arguments do not hold for packed-refs:
* The packed-refs file can be large and take significant time to
rewrite.
* Many references are stored in a single packed-refs file, so it could
be that the other process was changing a different reference than
the one that we are interested in.
Therefore, it is much more likely for there to be spurious lock
conflicts in connection to the packed-refs file, resulting in
unnecessary command failures.
So, if the first attempt to lock the packed-refs file fails, continue
retrying for a configurable length of time before giving up. The
default timeout is 1 second.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Older versions of AsciiDoc would convert the "--" in
"--option" into an emdash. According to 565e135
(Documentation: quote double-dash for AsciiDoc, 2011-06-29),
this is fixed in AsciiDoc 8.3.0. According to bf17126, we
don't support anything older than 8.4.1 anyway, so we no
longer need to worry about quoting.
Even though this does not change the output at all, there
are a few good reasons to drop the quoting:
1. It makes the source prettier to read.
2. We don't quote consistently, which may be confusing when
reading the source.
3. Asciidoctor does not like the quoting, and renders a
literal backslash.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A replacement for contrib/workdir/git-new-workdir that does not
rely on symbolic links and make sharing of objects and refs safer
by making the borrowee and borrowers aware of each other.
* nd/multiple-work-trees: (41 commits)
prune --worktrees: fix expire vs worktree existence condition
t1501: fix test with split index
t2026: fix broken &&-chain
t2026 needs procondition SANITY
git-checkout.txt: a note about multiple checkout support for submodules
checkout: add --ignore-other-wortrees
checkout: pass whole struct to parse_branchname_arg instead of individual flags
git-common-dir: make "modules/" per-working-directory directory
checkout: do not fail if target is an empty directory
t2025: add a test to make sure grafts is working from a linked checkout
checkout: don't require a work tree when checking out into a new one
git_path(): keep "info/sparse-checkout" per work-tree
count-objects: report unused files in $GIT_DIR/worktrees/...
gc: support prune --worktrees
gc: factor out gc.pruneexpire parsing code
gc: style change -- no SP before closing parenthesis
checkout: clean up half-prepared directories in --to mode
checkout: reject if the branch is already checked out elsewhere
prune: strategies for linked checkouts
checkout: support checking out into a new working directory
...
Teach git about a new option, "http.sslCipherList", which permits one to
specify a list of ciphers to use when negotiating SSL connections. The
setting can be overwridden by the GIT_SSL_CIPHER_LIST environment
variable.
Signed-off-by: Lars Kellogg-Stedman <lars@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Restructure "git push" codepath to make it easier to add new
configuration bits and then add push.followTags configuration that
turns --follow-tags option on by default.
* jk/push-config:
push: allow --follow-tags to be set by config push.followTags
cmd_push: pass "flags" pointer to config callback
cmd_push: set "atomic" bit directly
git_push_config: drop cargo-culted wt_status pointer
"git log --decorate" did not reset colors correctly around the
branch names.
* jc/decorate-leaky-separator-color:
log --decorate: do not leak "commit" color into the next item
Documentation/config.txt: simplify boolean description in the syntax section
Documentation/config.txt: describe 'color' value type in the "Values" section
Documentation/config.txt: have a separate "Values" section
Documentation/config.txt: describe the structure first and then meaning
Documentation/config.txt: explain multi-valued variables once
Documentation/config.txt: avoid unnecessary negation
"git log --decorate" did not reset colors correctly around the
branch names.
* jc/decorate-leaky-separator-color:
log --decorate: do not leak "commit" color into the next item
Documentation/config.txt: simplify boolean description in the syntax section
Documentation/config.txt: describe 'color' value type in the "Values" section
Documentation/config.txt: have a separate "Values" section
Documentation/config.txt: describe the structure first and then meaning
Documentation/config.txt: explain multi-valued variables once
Documentation/config.txt: avoid unnecessary negation
The versionsort.prerelease configuration variable can be used to
specify that v1.0-pre1 comes before v1.0.
* nd/versioncmp-prereleases:
config.txt: update versioncmp.prereleaseSuffix
versionsort: support reorder prerelease suffixes
The interaction between "git submodule update" and the
submodule.*.update configuration was not clearly documented.
* ms/submodule-update-config-doc:
submodule: improve documentation of update subcommand
This should improve readability. Compare "thislongname" and
"thisLongName". The following keys are left in unchanged. We can
decide what to do with them later.
- am.keepcr
- core.autocrlf .safecrlf .trustctime
- diff.dirstat .noprefix
- gitcvs.usecrlfattr
- gui.blamehistoryctx .trustmtime
- pull.twohead
- receive.autogc
- sendemail.signedoffbycc .smtpsslcertpath .suppresscc
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reported-by: "Mladen B." <mladen074@gmail.com>
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The interaction between "git submodule update" and the
submodule.*.update configuration was not clearly documented.
* ms/submodule-update-config-doc:
submodule: improve documentation of update subcommand
The configuration variable 'mailinfo.scissors' was hard to
discover in the documentation.
* mm/am-c-doc:
Documentation/git-am.txt: mention mailinfo.scissors config variable
Documentation/config.txt: document mailinfo.scissors
Longstanding configuration variable naming rules has been added to
the documentation.
* jc/conf-var-doc:
CodingGuidelines: describe naming rules for configuration variables
config.txt: mark deprecated variables more prominently
config.txt: clarify that add.ignore-errors is deprecated
The configuration variable 'mailinfo.scissors' was hard to
discover in the documentation.
* mm/am-c-doc:
Documentation/git-am.txt: mention mailinfo.scissors config variable
Documentation/config.txt: document mailinfo.scissors
In "git log --decorate", you would see the commit header like this:
commit ... (HEAD, jc/decorate-leaky-separator-color)
where "commit ... (" is painted in color.diff.commit, "HEAD" in
color.decorate.head, ", " in color.diff.commit, the branch name in
color.decorate.branch and then closing ")" in color.diff.commit.
If you wanted to paint the HEAD and local branch name in the same
color as the body text (perhaps because cyan and green are too faint
on a black-on-white terminal to be readable), you would not want to
have to say
[color "decorate"]
head = black
branch = black
because that you would not be able to reuse same configuration on a
white-on-black terminal. You would naively expect
[color "decorate"]
head = normal
branch = normal
to work, but unfortunately it does not. It paints the string "HEAD"
and the branch name in the same color as the opening parenthesis or
comma between the decoration elements. This is because the code
forgets to reset the color after printing the "prefix" in its own
color.
It theoretically is possible that some people were expecting and
relying on that the attribute set as the "diff.commit" color, which
is used to draw these opening parenthesis and inter-item comma, is
inherited by the drawing of branch names, but it is not how the
coloring works everywhere else.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'true' short-hand doesn't deserve a separate sentence; even our own
git config --bool foo.bar yes
would not produce it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of describing it for color.branch.<slot> and have everybody
else refer to it, explain how colors are spelled in "Values" section
upfront.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The various types of values set to the configuration variables
deserve more than a brief footnote mention in the syntax section,
and it will be more so after the later steps of this clean up
effort.
Move the mention of booleans from the syntax section to this new
section, and describe how human-readble integers can be spelled with
scaling there.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A line can be continued via a backquote-LF and can be chomped at a
comment character. But that is not specific to string-typed values.
It is common to all, just like unquoted leading and trailing
whitespaces are stripped and inter-word spacing are retained.
Move the description around and desribe these structural rules
first, then introduce the double-quote facility as a way to override
them, and finally mention various types of values.
Note that these structural rules only apply to the value part of the
configuration file. E.g.
[aSection] \
name \
= value
does not work, because the rules kick in only after seeing "name =".
Both the original and the updated text are phrased in an awkward way
by singling out the "value" part of the line because of this.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The syntax section repeats what the preamble explained already.
That a variable can have multiple values is more about what a
variable is than the syntax of the file.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Section names and variable names are both case-insensitive, but one
is described as "not case sensitive". Use "case-insensitive" for
both.
Instead of saying "... have to be escaped" without telling what that
escaping achieves, state it in a more positive way, i.e. "... can be
included by escaping".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation of 'git submodule update' has several problems:
1) It mentions that value 'none' of submodule.$name.update can be
overridden by --checkout, but other combinations of configuration
values and command line options are not mentioned.
2) The documentation of submodule.$name.update is scattered across three
places, which is confusing.
3) The documentation of submodule.$name.update in gitmodules.txt is
incorrect, because the code always uses the value from .git/config
and never from .gitmodules.
4) Documentation of --force was incomplete, because it is only effective
in case of checkout method of update.
Fix all these problems by documenting submodule.*.update in
git-submodule.txt and make everybody else refer to it.
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Michal Sojka <sojkam1@fel.cvut.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Longstanding configuration variable naming rules has been added to
the documentation.
* jc/conf-var-doc:
CodingGuidelines: describe naming rules for configuration variables
config.txt: mark deprecated variables more prominently
config.txt: clarify that add.ignore-errors is deprecated
The variable was documented in git-mailinfo.txt, but not in config.txt.
The detailed documentation is still the one of --scissors in
git-mailinfo.txt, but we give enough information here to let the user
understand what it is about, and to make it easy to find it (e.g.
searching ">8" and "8<" finds it).
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Extending the js/push-to-deploy topic, the behaviour of "git push"
when updating the working tree and the index with an update to the
branch that is checked out can be tweaked by push-to-checkout hook.
* jc/push-to-checkout:
receive-pack: support push-to-checkout hook
receive-pack: refactor updateInstead codepath
"git push" has been taught a "--atomic" option that makes push to
update more than one ref an "all-or-none" affair.
* sb/atomic-push:
Document receive.advertiseatomic
t5543-atomic-push.sh: add basic tests for atomic pushes
push.c: add an --atomic argument
send-pack.c: add --atomic command line argument
send-pack: rename ref_update_to_be_sent to check_to_send_update
receive-pack.c: negotiate atomic push support
receive-pack.c: add execute_commands_atomic function
receive-pack.c: move transaction handling in a central place
receive-pack.c: move iterating over all commands outside execute_commands
receive-pack.c: die instead of error in case of possible future bug
receive-pack.c: shorten the execute_commands loop over all commands
The old text gave an impression that even in a new repository using
old form might be safer. Only Git from pre 1.7.0 days choke on the
correctly named variable, which is ancient by today's standard.
We have no intention to remove the support for deprecated ones, but
let's make sure that we do not give room for confused questions such
as "why does core.sparse-checkout not work, when add.ignore-errors
does?"
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This was missing in 1b70fe5d30 (2015-01-07, receive-pack.c: negotiate
atomic push support) as I squashed the option in very late in the patch
series.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The assume-unchanged bit, and consequently core.ignoreStat, can be
misunderstood. Be assertive about the expectation that file changes should
notified to Git.
Overhaul the general wording thus:
1. direct description of what is ignored given first.
2. example instruction of the user manual action required.
3. use sideways indirection for assume-unchanged and update-index
references.
4. add a 'normally' to give leeway for the change detection.
Signed-off-by: Philip Oakley <philipoakley@iee.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When receive.denyCurrentBranch is set to updateInstead, a push that
tries to update the branch that is currently checked out is accepted
only when the index and the working tree exactly matches the
currently checked out commit, in which case the index and the
working tree are updated to match the pushed commit. Otherwise the
push is refused.
This hook can be used to customize this "push-to-deploy" logic. The
hook receives the commit with which the tip of the current branch is
going to be updated, and can decide what kind of local changes are
acceptable and how to update the index and the working tree to match
the updated tip of the current branch.
For example, the hook can simply run `git read-tree -u -m HEAD "$1"`
in order to emulate 'git fetch' that is run in the reverse direction
with `git push`, as the two-tree form of `read-tree -u -m` is
essentially the same as `git checkout` that switches branches while
keeping the local changes in the working tree that do not interfere
with the difference between the branches.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git send-email" normally identifies itself via X-Mailer: header
in the message it sends out. A new command line flag allows the
user to squelch the header.
* lh/send-email-hide-x-mailer:
test/send-email: --[no-]xmailer tests
send-email: add --[no-]xmailer option
"diff-highlight" filter (in contrib/) allows its color output
to be customized via configuration variables.
* jk/colors:
parse_color: drop COLOR_BACKGROUND macro
diff-highlight: allow configurable colors
parse_color: recognize "no$foo" to clear the $foo attribute
parse_color: support 24-bit RGB values
parse_color: refactor color storage
"git push" into a repository with a working tree normally refuses
to modify the branch that is checked out. The command learned to
optionally do an equivalent of "git reset --hard" only when there
is no change to the working tree and the index instead, which would
be useful to "deploy" by pushing into a repository.
* js/push-to-deploy:
t5516: more tests for receive.denyCurrentBranch=updateInstead
receive-pack: add another option for receive.denyCurrentBranch
"git config --get-color" did not parse its command line arguments
carefully.
* jk/colors-fix:
t4026: test "normal" color
config: fix parsing of "git config --get-color some.key -1"
docs: describe ANSI 256-color mode
The point of disallowing ".git" in the index is that we
would never want to accidentally overwrite files in the
repository directory. But this means we need to respect the
filesystem's idea of when two paths are equal. The prior
commit added a helper to make such a comparison for NTFS
and FAT32; let's use it in verify_path().
We make this check optional for two reasons:
1. It restricts the set of allowable filenames, which is
unnecessary for people who are not on NTFS nor FAT32.
In practice this probably doesn't matter, though, as
the restricted names are rather obscure and almost
certainly would never come up in practice.
2. It has a minor performance penalty for every path we
insert into the index.
This patch ties the check to the core.protectNTFS config
option. Though this is expected to be most useful on Windows,
we allow it to be set everywhere, as NTFS may be mounted on
other platforms. The variable does default to on for Windows,
though.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The point of disallowing ".git" in the index is that we
would never want to accidentally overwrite files in the
repository directory. But this means we need to respect the
filesystem's idea of when two paths are equal. The prior
commit added a helper to make such a comparison for HFS+;
let's use it in verify_path.
We make this check optional for two reasons:
1. It restricts the set of allowable filenames, which is
unnecessary for people who are not on HFS+. In practice
this probably doesn't matter, though, as the restricted
names are rather obscure and almost certainly would
never come up in practice.
2. It has a minor performance penalty for every path we
insert into the index.
This patch ties the check to the core.protectHFS config
option. Though this is expected to be most useful on OS X,
we allow it to be set everywhere, as HFS+ may be mounted on
other platforms. The variable does default to on for OS X,
though.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add --[no-]xmailer that allows a user to disable adding the 'X-Mailer:'
header to the email being sent.
Signed-off-by: Luis Henriques <henrix@camandro.org>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The assume-unchanged bit can be misunderstood. Be assertive about
the expectation that file changes should update that flag.
Signed-off-by: Philip Oakley <philipoakley@iee.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Marc Branchaud <marcnarc@xiplink.com>
Signed-off-by: Marc Branchaud <marcnarc@xiplink.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The repo setup procedure is updated to detect $GIT_DIR/commondir and
set $GIT_COMMON_DIR properly.
The core.worktree is ignored when $GIT_COMMON_DIR is set. This is
because the config file is shared in multi-checkout setup, but
checkout directories _are_ different. Making core.worktree effective
in all checkouts mean it's back to a single checkout.
Helped-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When synchronizing between working directories, it can be handy to update
the current branch via 'push' rather than 'pull', e.g. when pushing a fix
from inside a VM, or when pushing a fix made on a user's machine (where
the developer is not at liberty to install an ssh daemon let alone know
the user's password).
The common workaround – pushing into a temporary branch and then merging
on the other machine – is no longer necessary with this patch.
The new option is:
'updateInstead':
Update the working tree accordingly, but refuse to do so if there
are any uncommitted changes.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The thread at http://thread.gmane.org/gmane.comp.version-control.git/257392
details problems when applying patches with "git am" in a repository with
CRLF line endings. In the example in the thread, the repository originated
from "git-svn" so it is not possible to use core.eol and friends on it.
Right now, the best option is to use "git am --keep-cr". However, when
a patch create new files, the patch application process will reject the
new file because it finds a "/dev/null\r" string instead of "/dev/null".
The problem is that SMTP transport is CRLF-unsafe. Sending a patch by
email is the same as passing it through "dos2unix | unix2dos". The newly
introduced CRLFs are normally transparent because git-am strips them. The
keepcr=true setting preserves them, but it is mostly working by chance
and it would be very problematic to have a "git am" workflow in a
repository with mixed LF and CRLF line endings.
The MIME solution to this is the quoted-printable transfer enconding.
This is not something that we want to enable by default, since it makes
received emails horrible to look at. However, it is a very good match
for projects that store CRLF line endings in the repository.
The only disadvantage of quoted-printable is that quoted-printable
patches fail to apply if the maintainer uses "git am --keep-cr". This
is because the decoded patch will have two carriage returns at the end
of the line. Therefore, add support for base64 transfer encoding too,
which makes received emails downright impossible to look at outside
a MUA, but really just works.
The patch covers all bases, including users that still live in the late
80s, by also providing a 7bit content transfer encoding that refuses
to send emails with non-ASCII character in them. And finally, "8bit"
will add a Content-Transfer-Encoding header but otherwise do nothing.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
You can turn on ANSI text attributes like "reverse" by
putting "reverse" in your color spec. However, you cannot
ask to turn reverse off.
For common cases, this does not matter. You would turn on
"reverse" at the start of a colored section, and then clear
all attributes with a "reset". However, you may wish to turn
on some attributes, then selectively disable others. For
example:
git log --format="%C(bold ul yellow)%h%C(noul) %s"
underlines just the hash, but without the need to re-specify
the rest of the attributes. This can also help third-party
programs, like contrib/diff-highlight, that want to turn
some attribute on/off without disrupting existing coloring.
Note that some attribute specifications are probably
nonsensical (e.g., "bold nobold"). We do not bother to flag
such constructs, and instead let the terminal sort it out.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some terminals (like XTerm) allow full 24-bit RGB color
specifications using an extension to the regular ANSI color
scheme. Let's allow users to specify hex RGB colors,
enabling the all-important feature of hot pink ref
decorations:
git log --format="%h%C(#ff69b4)%d%C(reset) %s"
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Our color specifications have supported the 256-color ANSI
extension for years, but we never documented it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a missing article at the beginning of a sentence, and rephrase
slightly.
Signed-off-by: Thomas Quinot <thomas@quinot.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In addition to fixing trivial and obvious typos, be careful about
the following points:
- Spell ASCII, URL and CRC in ALL CAPS;
- Spell Linux as Capitalized;
- Do not omit periods in "i.e." and "e.g.".
Signed-off-by: Thomas Ackermann <th.acker@arcor.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow painting or not painting (partial) matches in context lines
when showing "grep -C<num>" output in color.
* rs/grep-color-words:
grep: add color.grep.matchcontext and color.grep.matchselected
The config option color.grep.match can be used to specify the highlighting
color for matching strings. Add the options matchContext and matchSelected
to allow different colors to be specified for matching strings in the
context vs. in selected lines. This is similar to the ms and mc specifiers
in GNU grep's environment variable GREP_COLORS.
Tests are from Zoltan Klinger's earlier attempt to solve the same
issue in a different way.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It took me a long time to notice the rider on the pack.threads
configuration option that it would multiple the memory consumption
by the number of CPUs in the machine. Clarify that the limit
applies per-thread.
Signed-off-by: Robert de Bath <rdebath@tvisiontech.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Newer versions of 'meld' breaks the auto-detection we use to see if
they are new enough to support the `--output` option.
* da/mergetool-meld:
mergetools/meld: make usage of `--output` configurable and more robust
Allow a temporary directory specified to be used while running "git
mergetool" backend.
* da/mergetool-temporary-directory:
t7610-mergetool: add test cases for mergetool.writeToTemp
mergetool: add an option for writing to a temporary directory
