* maint-1.6.5:
Git 1.6.5.8
Fix mis-backport of t7002
bash completion: factor submodules into dirty state
reset: unbreak hard resets with GIT_WORK_TREE
Conflicts:
Documentation/git.txt
GIT-VERSION-GEN
RelNotes
Remove the trailing 's' from "revisions" and "steps" when there is
only one.
Signed-off-by: David Ripton <dripton@ripton.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint-1.6.4:
Fix mis-backport of t7002
base85: Make the code more obvious instead of explaining the non-obvious
base85: encode_85() does not use the decode table
base85 debug code: Fix length byte calculation
checkout -m: do not try to fall back to --merge from an unborn branch
branch: die explicitly why when calling "git branch [-a|-r] branchname".
textconv: stop leaking file descriptors
commit: --cleanup is a message option
git count-objects: handle packs bigger than 4G
t7102: make the test fail if one of its check fails
* maint-1.6.3:
base85: Make the code more obvious instead of explaining the non-obvious
base85: encode_85() does not use the decode table
base85 debug code: Fix length byte calculation
checkout -m: do not try to fall back to --merge from an unborn branch
branch: die explicitly why when calling "git branch [-a|-r] branchname".
textconv: stop leaking file descriptors
commit: --cleanup is a message option
git count-objects: handle packs bigger than 4G
t7102: make the test fail if one of its check fails
Conflicts:
builtin-commit.c
* maint-1.6.2:
base85: Make the code more obvious instead of explaining the non-obvious
base85: encode_85() does not use the decode table
base85 debug code: Fix length byte calculation
checkout -m: do not try to fall back to --merge from an unborn branch
branch: die explicitly why when calling "git branch [-a|-r] branchname".
textconv: stop leaking file descriptors
commit: --cleanup is a message option
git count-objects: handle packs bigger than 4G
t7102: make the test fail if one of its check fails
Conflicts:
diff.c
The original patch that became cfe370c (grep: do not segfault when -f is
used, 2009-10-16), was made against "maint" or newer branch back then, but
the fix addressed the issue that was present as far as in 1.6.4 series.
The maintainer backported the patch to the 1.6.4 maintenance branch, but
failed to notice that the new tests assumed the setup done by the script
in "maint", which did quite a lot more than the same test script in 1.6.4
series, and the output didn't match the expected result.
This should fix it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Internally "git grep" runs regexec(3) that expects its input string
to be NUL terminated. When searching inside blob data, read_sha1_file()
automatically gives such a buffer, but builtin-grep.c forgot to put
the NUL at the end, even though it allocated enough space for it.
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Lift the explanation of -CCC option in the source to the documentation.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If you tried to export the official git repository, and then to import it
back then git-fast-import would die complaining that "Mark :1 not a commit".
Accordingly to a generated crash file, Mark 1 is not a commit but a blob,
which is pointed by junio-gpg-pub tag. Because git-tag allows to create such
tags, git-fast-import should import them.
Signed-off-by: Dmitry Potapov <dpotapov@gmail.com>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We actually expect to see an application/x-git-upload-pack-result
but we lied and said we Accept *-response. This was a typo on my
part when I was writing the code.
Fortunately the wrong Accept header had no real impact, as the
deployed git-http-backend servers were not testing the Accept
header before they returned their content.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The -L (--files-without-match) option is supposed to show paths that
produced no matches. When running the internal grep on work tree files,
however, we had an optimization to just return on zero-sized files,
without doing anything.
This optimization doesn't matter too much in practice (a tracked empty
file must be rare, or there is something wrong with your project); to
produce results consistent with GNU grep, we should stop the optimization
and show empty files as not having the given pattern.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, blank lines and/or comments within a series of
squash/fixup commands would confuse "git rebase -i" into thinking that
the series was finished. It would therefore require the user to edit
the commit message for the squash/fixup commits seen so far. Then,
after continuing, it would ask the user to edit the commit message
again.
Ignore comments and blank lines within a group of squash/fixup
commands, allowing them to be processed in one go.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint-1.6.2:
base85: Make the code more obvious instead of explaining the non-obvious
base85: encode_85() does not use the decode table
base85 debug code: Fix length byte calculation
checkout -m: do not try to fall back to --merge from an unborn branch
Conflicts:
diff.c
* maint-1.6.1:
base85: Make the code more obvious instead of explaining the non-obvious
base85: encode_85() does not use the decode table
base85 debug code: Fix length byte calculation
checkout -m: do not try to fall back to --merge from an unborn branch
branch: die explicitly why when calling "git branch [-a|-r] branchname".
textconv: stop leaking file descriptors
commit: --cleanup is a message option
git count-objects: handle packs bigger than 4G
t7102: make the test fail if one of its check fails
Conflicts:
diff.c
* maint-1.6.0:
base85: Make the code more obvious instead of explaining the non-obvious
base85: encode_85() does not use the decode table
base85 debug code: Fix length byte calculation
checkout -m: do not try to fall back to --merge from an unborn branch
branch: die explicitly why when calling "git branch [-a|-r] branchname".
As a verb, 'setup' is spelled 'set up'. “diff commands such as
diff-files” scans better without a comma. Clarify that shallow
and deep are special non-boolean values for format.thread rather
than boolean values with some other name.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In commit 56752391 (Make "git gc" pack all refs by default,
2007-05-24), 'git gc' was changed to run pack-refs by default
Versions before v1.5.1.2 cannot clone repos with packed refs over
http, and versions before v1.4.4 cannot handled packed refs at
all, but more recent git should have no problems. Try to make
this more clear in the git-config manual.
The analagous passage in git-gc.txt was updated already with
commit fe2128a (Change git-gc documentation to reflect
gc.packrefs implementation., 2008-01-09).
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If switching from an unborn branch (= empty tree) to a valid commit failed
without -m, it would fail with -m option as well.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The -a and -r options used to be silently ignored in such a command.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The fast-import parser does not validate that the author, committer
or tagger name component contains both a name and an email address.
Therefore the name component has always been optional. Correct the
documentation to match the implementation.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"What happened to my patch" is pretty much a FAQ on the Git mailing list,
it deserves a few paragraphs in SubmittingPatches...
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the implementation of GIT_PS1_SHOWDIRTYSTATE in 738a94a (bash:
offer to show (un)staged changes, 2009-02-03), I cut&pasted the
git-diff invocations from dirty-worktree checks elsewhere, carrying
along the --ignore-submodules option.
As pointed out by Kevin Ballard, this doesn't really make sense: to
the _user_, a changed submodule counts towards uncommitted changes.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint-1.6.1:
textconv: stop leaking file descriptors
commit: --cleanup is a message option
git count-objects: handle packs bigger than 4G
t7102: make the test fail if one of its check fails
Conflicts:
builtin-commit.c
diff.c
We read the output from textconv helpers over a pipe, but we
never actually closed our end of the pipe after using it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 952dfc6 tried to tighten the safety valves for doing
a "reset --hard" in a bare repository or outside the work
tree, but accidentally broke the case for GIT_WORK_TREE.
This patch unbreaks it.
Most git commands which need a work tree simply use
NEED_WORK_TREE in git.c to die before they get to their
cmd_* function. Reset, however, only needs a work tree in
some cases, and so must handle the work tree itself. The
error that 952dfc6 made was to simply forbid certain
operations if the work tree was not set up; instead, we need
to do the same thing that NEED_WORK_TREE does, which is to
call setup_work_tree(). We no longer have to worry about dying
in the non-worktree case, as setup_work_tree handles that
for us.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the usage message for "git commit", the --cleanup option appeared
at the end, as one of the "contents options":
usage: git commit [options] [--] <filepattern>...
...
Commit message options
...
Commit contents options
...
--allow-empty ok to record an empty change
--cleanup <default> how to strip spaces and #comments from message
This is confusing, in part because it makes it ambiguous whether
--allow-empty, just above, refers to an empty diff or an empty message.
Move --cleanup into the 'message options' group. Also add a pair of
comments to prevent similar oversights in the future.
Signed-off-by: Greg Price <price@ksplice.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use off_t to count sizes of packs and objects to avoid overflow after
4Gb.
Signed-off-by: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The value of core.worktree in a ".git/config" is honored even when it
differs from the directory that has the ".git" directory as its
subdirectory. This is likely to be a misconfiguration, so warn users
about it. Also, drop the part of the documentation that incorrectly
claimed that we ignore such a misconfigured value.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On big endian platforms with 8-byte unsigned long, the code reads the
size of the index extension section (which is a 4-byte network byte
order integer) incorrectly.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
