The basic test used to leave unnecessary trash directories in the
t/ directory.
* jk/test-framework-updates:
t0000: drop "known breakage" test
t0000: simplify HARNESS_ACTIVE hack
t0000: set TEST_OUTPUT_DIRECTORY for sub-tests
"git merge-base --octopus" used to leave cleaning up suboptimal
result to the caller, but now it does the clean-up itself.
* bm/merge-base-octopus-dedup:
merge-base --octopus: reduce the result from get_octopus_merge_bases()
merge-base: separate "--independent" codepath into its own helper
A "gc" process running as a different user should be able to stop a
new "gc" process from starting.
* km/gc-eperm:
gc: notice gc processes run by other users
Using the same username and password during the tests would not
catch a potential breakage of sending one when we should be sending
the other.
* jk/http-auth-tests-robustify:
use distinct username/password for http auth tests
Teach "cat-file --batch" to show delta-base object name for a
packed object that is represented as a delta.
* jk/oi-delta-base:
cat-file: provide %(deltabase) batch format
sha1_object_info_extended: provide delta base sha1s
"git add -A" (no other arguments) in a totally empty working tree
used to emit an error.
* nd/add-empty-fix:
add: don't complain when adding empty project root
Fetching 'frotz' branch with "git fetch", while having
'frotz/nitfol' remote-tracking branch from an earlier fetch, would
error out, primarily because the command has not been told to
remove anything on our side. In such a case, "git fetch --prune"
can be used to remove 'frotz/nitfol' to make room to fetch and
store 'frotz' remote-tracking branch.
* tm/fetch-prune:
fetch --prune: Run prune before fetching
fetch --prune: always print header url
Allow "git diff -O<file>" to be configured with a new configuration
variable.
* sb/diff-orderfile-config:
diff: add diff.orderfile configuration variable
diff: let "git diff -O" read orderfile from any file and fail properly
t4056: add new tests for "git diff -O"
When we figure out how many file descriptors to allocate for
keeping packfiles open, a system with non-working getrlimit() could
cause us to die(), but because we make this call only to get a
rough estimate of how many is available and we do not even attempt
to use up all file descriptors available ourselves, it is nicer to
fall back to a reasonable low value rather than dying.
* jh/rlimit-nofile-fallback:
get_max_fd_limit(): fall back to OPEN_MAX upon getrlimit/sysconf failure
A few places where we relied on a fixed length buffer to hold
pathnames in these two programs have been converted to use strbuf.
* mh/path-max:
builtin/prune.c: use strbuf to avoid having to worry about PATH_MAX
prune-packed: use strbuf to avoid having to worry about PATH_MAX
read_sha1_file() that is the workhorse to read the contents given
an object name honoured object replacements, but there is no
corresponding mechanism to sha1_object_info() that is used to
obtain the metainfo (e.g. type & size) about the object, leading
callers to weird inconsistencies.
* cc/replace-object-info:
replace info: rename 'full' to 'long' and clarify in-code symbols
Documentation/git-replace: describe --format option
builtin/replace: unset read_replace_refs
t6050: add tests for listing with --format
builtin/replace: teach listing using short, medium or full formats
sha1_file: perform object replacement in sha1_object_info_extended()
t6050: show that git cat-file --batch fails with replace objects
sha1_object_info_extended(): add an "unsigned flags" parameter
sha1_file.c: add lookup_replace_object_extended() to pass flags
replace_object: don't check read_replace_refs twice
rename READ_SHA1_FILE_REPLACE flag to LOOKUP_REPLACE_OBJECT
Introduce "negative pathspec" magic, to allow "git log -- . ':!dir'" to
tell us "I am interested in everything but 'dir' directory".
* nd/negative-pathspec:
pathspec.c: support adding prefix magic to a pathspec with mnemonic magic
Support pathspec magic :(exclude) and its short form :!
glossary-content.txt: rephrase magic signature part
Descriptions for all the settings fell under the initial "Each
submodule section also contains the following required keys:". The
example shows sections with just 'path' and 'url' entries, which are
indeed required, but we should still make the required/optional
distinction explicit to clarify that the rest of them are optional.
Signed-off-by: W. Trevor King <wking@tremily.us>
Reviewed-by: Heiko Voigt <hvoigt@hvoigt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we have a remote-tracking branch named "frotz/nitfol" from a
previous fetch, and the upstream now has a branch named "frotz",
fetch would fail to remove "frotz/nitfol" with a "git fetch --prune"
from the upstream. git would inform the user to use "git remote
prune" to fix the problem.
Change the way "fetch --prune" works by moving the pruning operation
before the fetching operation. This way, instead of warning the user
of a conflict, it autmatically fixes it.
Signed-off-by: Tom Miller <jackerran@gmail.com>
Tested-by: Thomas Rast <tr@thomasrast.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If "fetch --prune" is run with no new refs to fetch, but it has refs
to prune. Then, the header url is not printed as it would if there were
new refs to fetch.
Output before this patch:
$ git fetch --prune remote-with-no-new-refs
x [deleted] (none) -> origin/world
Output after this patch:
$ git fetch --prune remote-with-no-new-refs
From https://github.com/git/git
x [deleted] (none) -> origin/test
Signed-off-by: Tom Miller <jackerran@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The word 'prefix' is currently translated as 'Prefix'
which is not a German word. It should be translated as
'Präfix'.
Signed-off-by: Ralf Thielow <ralf.thielow@gmail.com>
Since 64a99eb4 git gc refuses to run without the --force option if
another gc process on the same repository is already running.
However, if the repository is shared and user A runs git gc on the
repository and while that gc is still running user B runs git gc on
the same repository the gc process run by user A will not be noticed
and the gc run by user B will go ahead and run.
The problem is that the kill(pid, 0) test fails with an EPERM error
since user B is not allowed to signal processes owned by user A
(unless user B is root).
Update the test to recognize an EPERM error as meaning the process
exists and another gc should not be run (unless --force is given).
Signed-off-by: Kyle J. McKay <mackyle@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Having a simulated "known breakage" test means that the test
suite will always tell us there is a bug to be fixed, even
though it is only simulated.
The right way to test this is in a sub-test, that can also
check that we provide the correct exit status and output.
Fortunately, we already have such a test (added much later
by 5ebf89e).
We could arguably get rid of the simulated success test
immediately above, as well, as it is also redundant with the
tests added in 5ebf89e. However, it does not have the
annoying behavior of the "known breakage" test. It may also
be easier to debug if the test suite is truly broken, since
it is not a test-within-a-test, as the later tests are.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 517cd55 set HARNESS_ACTIVE unconditionally in
sub-tests, because that value affects the output of
"--verbose". t0000 needs stable output from its sub-tests,
and we may or may not be running under a TAP harness.
That commit made the decision to always set the variable,
since it has another useful side effect, which is
suppressing writes to t/test-results by the sub-tests (which
would just pollute the real results).
Since the last commit, though, the sub-tests have their own
test-results directories, so this is no longer an issue. We
can now update a few comments that are no longer accurate
nor necessary.
We can also revisit the choice of HARNESS_ACTIVE. Since we
must choose one value for stability, it's probably saner to
have it off. This means that future patches could test
things like the test-results writing, or the "--quiet"
option, which is currently ignored when run under a harness.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Running t0000 produces more trash directories than expected and does
not clean up after itself:
$ ./t0000-basic.sh
[...]
$ ls -d trash\ directory.*
trash directory.failing-cleanup
trash directory.mixed-results1
trash directory.mixed-results2
trash directory.partial-pass
trash directory.test-verbose
trash directory.test-verbose-only-2
These scratch areas for sub-tests should be under the t0000 trash
directory, but because TEST_OUTPUT_DIRECTORY defaults to
TEST_DIRECTORY, which is exported to help sub-tests find
test-lib.sh, the sub-test trash directories are created under the
toplevel t/ directory instead. Because some of the sub-tests
simulate failures, their trash directories are kept around.
Fix it by explicitly setting TEST_OUTPUT_DIRECTORY appropriately for
sub-tests.
An alternative fix would be to pass the --root parameter that only
specifies where to put the trash directories, which would also work.
However, using TEST_OUTPUT_DIRECTORY is more futureproof in case
tests want to write more output in addition to the test-results/
(which are already suppressed in sub-tests using the HARNESS_ACTIVE
setting) and trash directories.
This fixes a regression introduced by 38b074d (t/test-lib.sh: fix
TRASH_DIRECTORY handling, 2013-04-14). Before that commit, the
TEST_OUTPUT_DIRECTORY setting was not respected consistently so most
tests did their work in a "trash" subdirectory of the current
directory instead of the output dir.
Signed-off-by: Jeff King <peff@peff.net>
Clarified-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The httpd server we set up to test git's http client code
knows about a single account, in which both the username and
password are "user@host" (the unusual use of the "@" here is
to verify that we handle the character correctly when URL
escaped).
This means that we may miss a certain class of errors in
which the username and password are mixed up internally by
git. We can make our tests more robust by having distinct
values for the username and password.
In addition to tweaking the server passwd file and the
client URL, we must teach the "askpass" harness to accept
multiple values. As a bonus, this makes the setup of some
tests more obvious; when we are expecting git to ask
only about the password, we can seed the username askpass
response with a bogus value.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This reverts commit 31b49d9b65.
That commit taught do_askpass to hand ownership of our
buffer back to the caller rather than simply return a
pointer into our internal strbuf. What it failed to notice,
though, was that our internal strbuf is static, because we
are trying to emulate the getpass() interface.
By handing off ownership, we created a memory leak that
cannot be solved. Sometimes git_prompt returns a static
buffer from getpass() (or our smarter git_terminal_prompt
wrapper), and sometimes it returns an allocated string from
do_askpass.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add an entry into the table of supported OSes. Do not set _XOPEN_SOURCE
(contrary to OpenBSD) because that disables the u_short and u_long
typedefs, which are used unconditionally in various other header files.
Signed-off-by: Benny Siegert <bsiegert@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Enum names SHORT/MEDIUM/FULL were too broad to be descriptive. And
they clashed with built-in symbols on platforms like Windows.
Clarify by giving them REPLACE_FORMAT_ prefix.
Rename 'full' format in "git replace --format=<name>" to 'long', to
match others (i.e. 'short' and 'medium').
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
No code ever used this symbol since the command was introduced at
9f613ddd (Add git-for-each-ref: helper for language bindings,
2006-09-15).
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Scripts that use "merge-base --octopus" could do the reducing
themselves, but most of them are expected to want to get the reduced
results without having to do any work themselves.
Tests are taken from a message by Василий Макаров
<einmalfel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
---
We might want to vet the existing callers of the underlying
get_octopus_merge_bases() and find out if _all_ of them are doing
anything extra (like deduping) because the machinery can return
duplicate results. And if that is the case, then we may want to
move the dedupling down the callchain instead of having it here.
It piggybacks on an unrelated handle_octopus() function only because
there are some similarities between the way they need to preprocess
their input and output their result. There is nothing similar in
the true logic between these two operations.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* fc/remote-helper-fixes:
remote-hg: test 'shared_path' in a moved clone
remote-hg: add tests for special filenames
remote-hg: fix 'shared path' path
remote-helpers: add extra safety checks
remote-hg: avoid buggy strftime()
Two packfiles that contain the same set of objects have
traditionally been named identically, but that made repacking a
repository that is already fully packed without any cruft with a
different packing parameter cumbersome. Update the convention to
name the packfile after the bytestream representation of the data,
not after the set of objects in it.
* jk/name-pack-after-byte-representation:
pack-objects doc: treat output filename as opaque
pack-objects: name pack files after trailer hash
sha1write: make buffer const-correct
"git diff ../else/where/A ../else/where/B" when ../else/where is
clearly outside the repository, and "git diff --no-index A B", do
not have to look at the index at all, but we used to read the index
unconditionally.
* tg/diff-no-index-refactor:
diff: avoid some nesting
diff: add test for --no-index executed outside repo
diff: don't read index when --no-index is given
diff: move no-index detection to builtin/diff.c
Show the total number of paths and the number of paths shown so far
when "git difftool" prompts to launch an external diff tool, which
would give users some sense of progress.
* zk/difftool-counts:
diff.c: fix some recent whitespace style violations
difftool: display the number of files in the diff queue in the prompt
"git cat-file --batch=", an admittedly useless command, did not
behave very well.
* jk/cat-file-regression-fix:
cat-file: handle --batch format with missing type/size
cat-file: pass expand_data to print_object_or_die
"git rev-parse <revs> -- <paths>" did not implement the usual
disambiguation rules the commands in the "git log" family used in
the same way.
* jk/rev-parse-double-dashes:
rev-parse: be more careful with munging arguments
rev-parse: correctly diagnose revision errors before "--"
Make "git push origin master" update the same ref that would be
updated by our 'master' when "git push origin" (no refspecs) is run
while the 'master' branch is checked out, which makes "git push"
more symmetric to "git fetch" and more usable for the triangular
workflow.
* jc/push-refmap:
push: also use "upstream" mapping when pushing a single ref
push: use remote.$name.push as a refmap
builtin/push.c: use strbuf instead of manual allocation
Subversion serf backend in versions 1.8.5 and below has a bug(*) that the
function creating the descriptor of a file change -- add_file() --
doesn't make a copy of its third argument when storing it on the
returned descriptor. As a result, by the time this field is used (in
transactions of file copying or renaming) it may well be released, and
the memory reused.
One of its possible manifestations is the svn assertion triggering on an
invalid path, with a message
svn_fspath__skip_ancestor: Assertion
`svn_fspath__is_canonical(child_fspath)' failed.
This patch works around this bug, by storing the value to be passed as
the third argument to add_file() in a local variable with the same scope
as the file change descriptor, making sure their lifetime is the same.
* [ew: fixed in Subversion r1553376 as noted by Jonathan Nieder]
Cc: Benjamin Pabst <benjamin.pabst85@gmail.com>
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Roman Kagan <rkagan@mail.ru>
